Application of covalent organic framework as the adsorbent for solid-phase extraction of trace levels of pesticide residues prior to high-performance liquid chromatography-ultraviolet detection

Alien species water hyacinth realizes waste into treasure: The preparation of biomass sorbent to determine benzoylurea insecticides in tea products

A fast and effective analytical method with biomass solid-phase microextraction sorbent combined with a high-performance liquid chromatography-ultraviolet detector was proposed for the determination of benzoylurea (BU) insecticides in tea products. The novel sorbent was prepared by activating and then carbonizing water hyacinth with a fast growth rate and low application value as raw material and showed a high specific surface area and multiple interactions with analytes, such as electrostatic action, hydrogen bonding, and π-π conjugation. After optimizing the three most important extraction parameters (pH [X1], sample loading rate [X2], and solution volume [X3]) by Box-Behnken design, the as-established analytical method showed good extraction performance: excellent recovery (80.13%-106.66%) and wide linear range (1-400 µg/L) with a determination coefficient of 0.9992-0.9999, a low limit of detection of 0.02-0.1 µg/L and the satisfactory practical application results in tea products. All these indicate that the water hyacinth-derived material has the potential as a solid-phase extraction sorbent for the detection and removal of BU insecticides from tea products, and at the same time, it can also achieve the effect of rational use of biological resources, maintaining ecological balance, turning waste into treasure, and achieving industrial production.

Bacteria-templated ZIF-8 embedded in polyacrylonitrile nanofibers as a novel sorbent for thin film microextraction of benzoylurea insecticides

In the present work, the rod-like ZIF-8 (ZIF8@E coli) was prepared by fast, easy and environmentally friendly method of biomimetic mineralization with Escherichia coli bacteria as a bio-template and was exploited for the first time in the microextraction. In this regard, electrospun nanofiber mats of polyacrylonitrile (PAN) and ZIF8@E coli were prepared by electrospinning method and used as a new sorbent for thin film microextraction (TFME) of benzoylurea insecticides such as Hexaflumuron and Teflubenzuron as model analytes. The PAN/ZIF8@E coli nanocomposite was characterized using electron scanning microscopy and various spectroscopy techniques. Factors affecting the proposed extraction method were screened and optimized using the experiment design strategy. Then, the model analytes were measured by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detector after microextraction. Satisfactory figures of merit were obtained for suggested TFME-HPLC-UV under optimum conditions. The suitable linearity varied in the range of 0.5-200 μg L-1 with R2 greater than 0.9968. The limit of detections for Hexaflumuron and Teflubenzuron were 0.12 and 0.15 μg L-1, respectively. The application of the method in the real sample was investigated by analyzing the selected analytes in environmental water and food samples. The spiking recovery of the selected analytes varied in the range of 93.0-109.8 % (RSD≤7.68). The results confirm the efficient application of this new sorbent in TFME approach. Considering the high availability, ease of production, and environmental friendliness of bacteria along with the significant improvement of metal-organic framework (MOF) growth efficiency, biomimetic mineralization is expected to be efficient method for the synthesis of ordered MOFs for use in extraction fields.

Advanced porous organic materials for sample preparation in pharmaceutical analysis

The development of novel sample preparation media plays a crucial role in pharmaceutical analysis. To facilitate the extraction and enrichment of pharmaceutical molecules in complex samples, various functionalized materials have been developed and prepared as adsorbents. Recently, some functionalized porous organic materials have become adsorbents for pharmaceutical analysis due to their unique properties of adsorption and recognition. These advanced porous organic materials, combined with consequent analytical techniques, have been successfully used for pharmaceutical analysis in complex samples such as environmental and biological samples. This review encapsulates the progress of advanced porous materials for pharmaceutical analysis including pesticides, antibiotics, chiral drugs, and other compounds in the past decade. In addition, we also address the limitations and future trends of these porous organic materials in pharmaceutical analysis.

Introduction of a new and safe synthesis procedure for Ni-MOF-I in aqueous solution and its application for the extraction of some pesticides from different beverages

For the first time, this research introduces an analytical application of Ni-MOF-I, which was used as an adsorbent in a dispersive micro solid phase extraction procedure followed by dispersive liquid-liquid microextraction for the extraction and preconcentration of seven pesticides from different fruit juices. Also, Ni-MOF-I was synthesized by a new and green method with many advantages over the previously published synthesis procedures. For example, effortless and green synthesis, no need for autoclaves and ovens, and elimination of organic solvent usage are the main highlights. The synthesized Ni-MOF-I was characterized by applying nitrogen adsorption/desorption, energy-dispersive X-ray, scanning electron microscopy, Fourier transform infrared spectrophotometry, and X-ray diffraction analyses. The studied pesticides were extracted and preconcentrated by the proposed method. Then, the extracted analytes in the sedimented organic phase were injected into a gas chromatography-flame ionization detector. Acceptable analytical results such as low limits of detection (0.15-0.60 μg L-1) and quantification (0.50-2.0 μg L-1), reasonable extraction recoveries (51-80%), high enrichment factors (255-400), satisfactory relative standard deviation values of 4.8-7.2% (intra-day precision, n = 6) and 5.3-7.5% (inter-day precision, n = 4), and wide linear ranges were obtained. The proposed method can be introduced as an effective analytical technique based on Ni-MOF-I for the analysis of different pesticides in fruit beverages.

Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as electrochemical sensors for the efficient detection of pharmaceutical residues

Pharmaceutical residues are the undecomposed remains from drugs used in the medical and food industries. Due to their potential adverse effects on human health and natural ecosystems, they are of increasing worldwide concern. The acute detection of pharmaceutical residues can give a rapid examination of their quantity and then prevent them from further contamination. Herein, this study summarizes and discusses the most recent porous covalent-organic frameworks (COFs) and metal-organic frameworks (MOFs) for the electrochemical detection of various pharmaceutical residues. The review first introduces a brief overview of drug toxicity and its effects on living organisms. Subsequently, different porous materials and drug detection techniques are discussed with materials' properties and applications. Then the development of COFs and MOFs has been addressed with their structural properties and sensing applications. Further, the stability, reusability, and sustainability of MOFs/COFs are reviewed and discussed. Besides, COFs and MOFs' detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles are analyzed and discussed. Lastly, this review summarized and discussed the MOF@COF composite as sensors, the fabrication strategies to enhance detection potential, and the current challenges in this area.

Construction of hierarchically porous metal-organic framework HP-UiO-66-30% for sensitive determination of benzoylurea insecticides

Due to widespread application of benzoylurea insecticides (BUs) and its persistence in environment, the effective capture of benzoylurea insecticides residues in environment is an important issue of environmental safety monitoring. To obtain excellent adsorption performance, creating defective structure in metal-organic frameworks (MOFs) can be employed as the method for adjusting its properties. Zirconium(Ⅳ)-based MOF termed as UiO-66-30% was constructed with 2-aminoterephthalic acid (NH₂-BDC) and terephthalic acid (H₂BDC) as building blocks. After calcination and removal of thermal-sensitive ligand (NH₂-BDC), hierarchically porous UiO-66-30% (HP-UiO-66-30%) with multistage pore structure and good stability was obtained. The unique structure of HP-UiO-66-30% endowed it to achieve instantaneous equilibrium (within 2 min) when it was used as a dispersed solid phase extraction (d-SPE) adsorbent to extract BUs from environmental samples, greatly reducing the operation time. A wide linear range (0.05-200 ng mL^-1), good linearity (R² ≥ 0.9980), low detection limits (0.01-0.03 ng mL^-1) and quantification limits (0.05-0.1 ng mL^-1) were obtained for BUs. In addition, the HP-UiO-66-30% material possessed the good reusability and the adsorption capacity did not change significantly over 16 adsorption-desorption cycles. Finally, the established dispersed solid phase extraction-high performance liquid chromatography-diode array detector (d-SPE-HPLC-DAD) method was successfully applied to determination of BUs residues in environmental soil samples. The results demonstrated that HP-UiO-66-30% was an excellent sorbent for extraction BUs from environmental samples.

Review of extraction and detection techniques for the analysis of pesticide residues in fruits to evaluate food safety and make legislative decisions: Challenges and anticipations

Fruits are vital parts of the human diet because they include necessary nutrients that the body needs. Pesticide use has increased dramatically in recent years to combat fruit pests across the world. Pesticide usage during production, on the other hand, frequently results in undesirable residues in fruits after harvest. Consumers are concerned about pesticide residues since most of the fruits are directly consumed and even recommended for the patients as dietary supplements. As a result of this worry, pesticide residues in fruits are being randomly monitored to re-assess the food safety situation and make informed legislative decisions. To assess the degree of pesticide residues in fruits, a simple and quick analytical procedure is usually required. As a result, pesticide residue detection (using various analytical techniques: GC, LC and Biosensors) becomes critical, and regulatory directives are formed to regulate their amounts via the Maximum Residue Limit (MRL). Over the previous two decades, a variety of extraction techniques and analytical methodologies for xenobiotic's efficient extraction, identification, confirmation and quantification have been developed, ranging from traditional to advanced. The goal of this review is to give readers an overview of the evolution of numerous extraction and detection methods for pesticide residue analysis in fruits. The objective is to assist analysts in better understanding how the ever-changing regulatory landscape might drive the need for new analytical methodologies to be developed in order to comply with current standards and safeguard consumers.

Fluorine-Functionalized Covalent-Organic-Framework-Coated Stir Bar for the Extraction of Benzoylurea Insecticides in Pear Juice and Beverage Followed by High-Performance Liquid Chromatography-Ultraviolet Detection

A fluorinated covalent organic framework (COF), named F-COF, was fabricated via simple room-temperature synthesis. With the characteristics of rich fluorine atoms, hydrophobicity, and large conjugated structure, F-COF was evaluated for the extraction of five benzoylurea insecticides (BUs) containing fluorine atoms, benzene ring, and urea bridge. Specifically, F-COF-coated stir bars were prepared by physical adhesion and exhibited higher extraction recovery (73-93 versus 40-85%) toward BUs than commercial stir bars in a shorter extraction time (50 min versus 24 h). The adsorption behavior of BUs on F-COF was explored, and it was assumed that the halogen bond (O-F), hydrophobic interaction, electrostatic interaction, and π-π stacking contributed to the adsorption. On the basis of it, a method combining stir bar sorptive extraction with liquid chromatography-ultraviolet detector was developed for trace analysis of five BUs. Under the optimal conditions, the limits of detection for BUs were found to be 0.301-0.672 μg/L, with the linear range of 1.0/2.0-500 μg/L and relative standard deviations of <8.0% (c = 5 μg/L and n = 7). The accuracy of the proposed method was validated by the recovery test, and the recoveries of target BUs in spiked pear juice and pear beverage were 82.0-113 and 84.0-112%, respectively.

Novel N-riched covalent organic framework for solid-phase microextraction of organochlorine pesticides in vegetable and fruit samples

A covalent organic framework named N-COF was successfully constructed by the aldehyde-amine condensation reaction between 2,4,6-tris (4-formyl phenoxy)-1,3,5-triazine and 1,3-bis(4-aminophenyl) urea for the first time. The prepared N-COF exhibited good stability and high affinity to organochlorine pesticides (OCPs). Thus, the N-COF was served as solid phase microextraction fiber coating for extraction of six OCPs from vegetables and fruits including romaine lettuce, cabbage, Chinese cabbage, apple, pear and peach, followed by quantitation with gas chromatography-electron capture detector (GC-ECD). Under the optimal conditions, good linearities for the OCPs existed in the ranges from 0.1 to 1.0 ng g^-1 to 100.0 ng g^-1 for the samples. The low limits of detection for analytes were obtained in the range of 0.03-0.3 ng g^-1. The present work can offer new alternative for sensitive analysis of trace level of OCPs in vegetables and fruits.

[Application progress of covalent organic framework materials in extraction of toxic and harmful substances]

Toxic and hazardous substances constitute a category of compounds that are potentially hazardous to humans, other organisms, and the environment. These substances include pesticides (benzoylureas, pyrethroids, neonicotinoids), persistent organic pollutants (polycyclic aromatic hydrocarbons, polychlorinated biphenyls, perfluorinated compounds), plasticizers (phthalate esters, phenolic endocrine disruptors), medicines (sulfonamides, non-steroid anti-inflammatory drugs, tetracyclines, fluoroquinone antibiotics), heterocyclic aromatic amines, algal toxins, and radioactive substances. Discharge of these toxic and harmful substances, as well as their possible persistence and bioaccumulation, pose a major risk to human health, often to the extent of being life-threatening. Therefore, it is important to analyze and detect toxic and hazardous substances in the environment, drinking water, food, and daily commodities. Sample pretreatment is an imperative step in most of the currently used analytical methods, especially in the analysis of trace toxic and harmful substances in complex samples. An efficient and fast sample pretreatment technology not only helps improve the sensitivity, selectivity, reproducibility, and accuracy of analytical methods, but also avoids contamination of the analytical instruments and even damages the performance and working life of instruments. Sample pretreatment techniques widely used in the extraction of toxic and hazardous substances include solid-phase extraction (SPE), solid-phase microextraction (SPME), and dispersed solid-phase extraction (DSPE). The adsorbent material plays a key role in these pretreatment techniques, thereby determining their selectivity and efficiency. In recent years, covalent organic frameworks (COFs) have attracted increasing attention in sample pretreatment. COFs represent an exciting new class of porous crystalline materials constructed via the strong covalent bonding of organic building units through a reversible condensation reaction. COFs present four advantages: (1) precise control over structure type and pore size by consideration of the target molecular structure based on the connectivity and shape of the building units; (2) post-synthetic modification for chemical optimization of the pore interior toward optimized interaction with the target; (3) straightforward scalable synthesis; (4) feasible formation of composites with magnetic nanoparticles, carbon nanotubes, graphene, silica, etc., which is beneficial to enhance the performance of COFs and meet the requirement of diverse pretreatment technologies. Because of the well-defined crystalline porous structures and tailored functionalities, COFs have excellent potential for use in target extraction. However, some issues need to be addressed for the application of COFs in the extraction of toxic and hazardous substances. (1) For the sample matrix, most of the reported COFs are highly hydrophobic, which limits their dispersibility in water-based samples, leading to poor extraction performance. COFs with good dispersibility in water-based samples are urgently required. (2) Besides, COFs rely on hydrophobic interaction, size repulsion, π-π stacking, and Van der Waals forces to extract target substances, but they are not effective for some polar targets. Thus, it is necessary to develop COFs with high affinity for polar toxic and hazardous substances. (3) Methods for the synthesis of COFs have evolved from solvothermal methods to room-temperature methods, mechanical grinding, microwave-assisted synthesis, ion thermal methods, etc. Most of the existing methods are time-consuming, laborious, and environmentally unfriendly. The starting materials are too expensive to prepare COFs in large quantities. More effort is required to improve the synthesis efficiency and overcome the obstacles in the application of COFs for extraction. This article summarizes and reviews the research progress in COFs toward the extraction of toxic and hazardous substances in recent years. Finally, the application prospects of COFs in this field are summarized, which serves as a reference for further research into pretreatment technologies based on COFs.

Recent Advances in the Application of Covalent Organic Frameworks in Extraction: A Review

Covalent organic frameworks (COFs) are a class of emerging materials that are synthesized based on the covalent bonds between different building blocks. COFs possess unique attributes in terms of high porosity, tunable structure, ordered channels, easy modification, large surface area, and great physical and chemical stability. Due to these features, COFs have been extensively applied as adsorbents in various extraction modes. Enhanced extraction performance could be reached with modified COFs, where COFs are presented as composites with other materials including nanomaterials, carbon and its derivatives, silica, metal-organic frameworks, molecularly imprinted polymers, etc. This review article describes the recent advances, developments, and applications of COF-based materials being utilized as adsorbents in the extraction methods. The COFs, their properties, their synthesis approaches as well as their composite structures are reviewed. Most importantly, suggested mechanisms for the extraction of analyte(s) by COF-based materials are also discussed. Finally, the current challenges and future prospects of COF-based materials in extraction methods are summarized and considered in order to provide more insights into this field.

A review on the adsorption mechanism of different organic contaminants by covalent organic framework (COF) from the aquatic environment

Recently, covalent organic frameworks (COFs) have gained significant attention as a promising material for the elimination of various organic pollutants due to their distinctive characteristics such as high surface area, adjustable porosity, high removal efficiency, and recyclability. The efficiency and selectivity of COFs depend on the decorated functional group and the pore size of the chemical structure. Hence, this review highlights the adsorption removal mechanism of different organic contaminants such as (pharmaceutical and personal care products, pesticides, dyes, and industrial by-products) by COFs from an aqueous solution. Spectroscopic techniques and theoretical calculation methods are introduced to understand the mechanism of the adsorption process. Also, a comparison between the performance of COFs and other adsorbents was discussed. Furthermore, future research directions and challenges encountered in the removal of organic contaminants by COFs are discussed.

Synthesis of the Magnetically Nanoporous Organic Polymer Fe3O4@SiO2-NH2-COP and Its Application in the Determination of Sulfonamide Residues in Surface Water Surrounding a Cattle Farm

Efficient extractions of trace antibiotic residues in the environment are a key factor for accurate quantification of the residues. A new nanoporous material, namely, magnetically covalent organic polymer (MCOP, Fe₃O₄@SiO₂-NH₂-COP) was synthesized in this work and was used for magnetic solid-phase extraction (MSPE). The combination of MSPE with high-performance liquid chromatography separation together with ultraviolet detection (HPLC-UV) was established as an effective method for the determination of four sulfonamide (SA) residues in surface water surrounding a cattle farm. The synthesized magnetic material was characterized by SEM, TEM, FT-IR, magnetic properties measurement system (MPMS), and nitrogen gas porosimetry. The material possessed many attractive features, such as a unique microporous structure, a larger specific surface area (137.93 m²·g⁻¹) than bare Fe₃O₄ (24.84 m²·g⁻¹), high saturation magnetization (50.5 emu·g⁻¹), open adsorption sites, and high stability. The influencing parameters, including pH, the used amount of MCOPs, the type of eluent, adsorption solution, and desorption time, were optimized. Under the optimized conditions, the method conferred good linearity ranges (R² ≥ 0.9990), low detection limits (S/N = 3, LOD, 0.10–0.25 μg·L⁻¹), and satisfactory recoveries (79.7% to 92.2%). The enrichment factor (EF) for the four SAs was 34.13–38.86. The relative standard deviations of intraday (n = 5) and of interday (n = 3) were less than 4.8% and 8.9%, respectively. The equilibria between extraction and desorption for SAs could be reached within 150 s. The proposed method was sensitive and convenient for detecting SA residues in complex environmental matrices, and the successful application of the new MCOPs as an adsorbent was demonstrated.

Covalent Organic Frameworks for Chemical and Biological Sensing

Covalent organic frameworks (COFs) are a class of crystalline porous organic polymers with polygonal porosity and highly ordered structures. The most prominent feature of the COFs is their excellent crystallinity and highly ordered modifiable one-dimensional pores. Since the first report of them in 2005, COFs with various structures were successfully synthesized and their applications in a wide range of fields including gas storage, pollution removal, catalysis, and optoelectronics explored. In the meantime, COFs also exhibited good performance in chemical and biological sensing, because their highly ordered modifiable pores allowed the selective adsorption of the analytes, and the interaction between the analytes and the COFs’ skeletons may lead to a detectable change in the optical or electrical properties of the COFs. In this review, we firstly demonstrate the basic principles of COFs-based chemical and biological sensing, then briefly summarize the applications of COFs in sensing some substances of practical value, including some gases, ions, organic compounds, and biomolecules. Finally, we discuss the trends and the challenges of COFs-based chemical and biological sensing.

[Application of imine covalent organic frameworks in sample pretreatment]

Imine covalent organic frameworks (I-COFs), including imine-linked COFs and hydrazone-linked COFs, are a new type of crystalline porous organic materials constructed by the condensation of organic monomers by the Schiff-base reaction. Because they are composed of lightweight elements linked by strong covalent bonds, I-COF materials possess the advantages of low skeleton density, large surface area, high porosity, abundant monomer species, controllable pore size, functionalized structure, diverse synthetic methods, excellent adsorption performance, outstanding physical and chemical stabilities, etc. In recent years, interest in the field of I-COFs has increased tremendously because of their exceptional performance and broad applications in gas storage, gas separation, catalysis, sensing, photoelectric materials, sample pretreatment, drug delivery, and other fields. To date, imine bonds are one of the most widely used covalent bonds in COFs, and represent one of the most important ways to obtain I-COFs with excellent chemical stabilities. The synthesis methods for I-COFs include solvothermal synthesis, microwave synthesis, mechanochemical grinding synthesis, and room-temperature synthesis methods. Solvothermal synthesis is the most extensively used method for the production of I-COFs with high specific surface areas and good thermal stabilities. The microwave synthesis method is conducive to the rapid synthesis of COFs in industry, providing a more time-saving, simpler, and safer route for large-scale preparation of I-COFs. The mechanochemical grinding synthesis of porous solids has gained importance as an alternative to conventional solvothermal synthesis, because the process is quick, environment-friendly, and potentially scalable. The room-temperature method is characterized by mild reaction conditions and rapid reactions. It is an energy-saving, economic, safe, and green synthesis method, which has emerged as a hot spot in the preparation of I-COFs in recent years. Research progress over the past years on the application of I-COFs in the field of materials science has undoubtedly established the basis of its application in analytical chemistry. Owing to the excellent physical and chemical properties of I-COF materials, they are suitable for use as separation and enrichment media for trace target compounds in complex samples. The high specific surface area and porosity, extended conjugate network skeleton, and π-electron-rich nature of the materials endow it with a high adsorption capacity. These materials are highly enriched in target analytes by π-π interactions, acid-base interactions, donor-acceptor interactions, hydrogen bonding, hydrophobic interactions, and other intermolecular interactions. Precise control of the microporous structure of I-COFs was obtained by controlling the chain length, geometric structure, doping elements, and substituent groups of the organic monomers. Selective enrichment of target trace substances was achieved by modifying the groups of I-COFs based on the principle of host guest adaptation, molecular sieving, or microporous filling effect. At present, research on the synthesis of I-COF materials is in the stage of rapid development, and many I-COFs with excellent properties and great application potential have been synthesized, allowing widespread application of I-COFs in sample pretreatment medium. This review summarizes the current state-of-the-art on the main types and synthetic methods of I-COFs, as well as the applications of I-COFs in solid-phase extraction, magnetic solid-phase extraction, dispersive solid-phase extraction, and solid-phase microextraction. The prospects of I-COFs in sample pretreatment are also presented.

Covalent organic frameworks as multifunctional materials for chemical detection

Sensitive and selective detection of chemical and biological analytes is critical in various scientific and technological fields. As an emerging class of multifunctional materials, covalent organic frameworks (COFs) with their unique properties of chemical modularity, large surface area, high stability, low density, and tunable pore sizes and functionalities, which together define their programmable properties, show promise in advancing chemical detection. This review demonstrates the recent progress in chemical detection where COFs constitute an integral component of the achieved function. This review highlights how the unique properties of COFs can be harnessed to develop different types of chemical detection systems based on the principles of chromism, luminescence, electrical transduction, chromatography, spectrometry, and others to achieve highly sensitive and selective detection of various analytes, ranging from gases, volatiles, ions, to biomolecules. The key parameters of detection performance for target analytes are summarized, compared, and analyzed from the perspective of the detection mechanism and structure-property-performance correlations of COFs. Conclusions summarize the current accomplishments and analyze the challenges and limitations that exist for chemical detection under different mechanisms. Perspectives on how future directions of research can advance the COF-based chemical detection through innovation in novel COF design and synthesis, progress in device fabrication, and exploration of novel modes of detection are also discussed.

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.

Fabrication of a Magnetic Fluorinated Covalent Organic Framework for the Selective Capture of Benzoylurea Insecticide Residue in Beverages

Efficient capture of benzoylurea insecticide (BU) residue in food is a vital procedure for food safe monitoring. Herein, a core-shell structured magnetic fluorinated covalent organic framework with good magnetic responsiveness and abundant fluorine affinity sites was successfully synthesized, suitable for magnetic solid-phase extraction (MSPE) of BUs. Using a room-temperature synthesis strategy, the magnetic fluorinated covalent organic framework was fabricated by in situ polymerization of 1,3,5-tris(4-aminophenyl) triazine (TAPT) and 2,3,5,6-tetrafluoroterephthaldehyde (TFTA) on the surface of carboxylated Fe₃O₄ nanoparticles. The competitive adsorption experiment and molecular simulation verified that this magnetic fluorinated covalent organic framework possesses favorable adsorption affinity for BUs. This magnetic fluorinated covalent organic framework could be easily regenerated and reused at least eight times with no reduction of enrichment performance. Combining this magnetic fluorinated covalent organic framework-based MSPE with high-performance liquid chromatography-tandem mass spectrometry, a novel sensitive method for the analysis of BUs was developed. In yellow wine and fruit juice samples, good linear correlations were obtained for BUs in the range of 10-2000 and 20-4000 ng·L^-1, respectively. The limit of quantitation of the BUs ranged from 1.4 to 13.3 ng·L^-1 in the two beverage matrices. Desirable precision was achieved, with intraday and interday relative standard deviations lower than 11%.

Applications of covalent organic frameworks and their composites in the extraction of pesticides from different samples

Pesticides are used extensively in a wide range of applications and due to their high rate of consumption, they are ubiquitous in the different media and samples like environment, water sources, air, soil, biological materials, wastes (liquids, solids or sludges), vegetables and fruits, where they can persist for long periods. Pesticides often have hazardous side effects and can cause a range of harmful diseases like Parkinson, Alzheimer, asthma, depression and anxiety, cancer, etc, even at low concentrations. To this end, extraction, pre-concentration and determination of pesticides from various samples presents significant challenges caused by sample complexity and the low concentrations of them in many samples. Often, direct extraction and determination of pesticides are impossible due to their low concentrations and the complexity of samples. The main goals of sample preparation are removing interfering species, pre-concentrating target analyte/s and converting the analytes into more stable forms (when needed). The most popular approach is solid-phase extraction due to its simplicity, efficiency, ease of operation and low cost. This method is based on using a wide variety of materials, among which covalent organic frameworks (COFs) can be identified as an emerging class of highly versatile materials exhibiting advantageous properties, such as a porous and crystalline structure, pre-designable structure, high physical and chemical stability, ease of modification, high surface area and high adsorption capacity. The present review will cover recent developments in synthesis and applications of COFs and their composites for extraction of pesticides, different synthesis approaches of COFs, possible mechanisms for interaction of COFs-based adsorbents with pesticides and finally, future prospects and challenges in the fabrication and utilization of COFs and their composites for extraction of pesticides.

Covalent Organic Frameworks: Synthesis, Properties and Applications-An Overview

Covalent Organic Frameworks (COFs) are an exciting new class of microporous polymers with unprecedented properties in organic material chemistry. They are generally built from rigid, geometrically defined organic building blocks resulting in robust, covalently bonded crystalline networks that extend in two or three dimensions. By strategically combining monomers with specific structures and properties, synthesized COF materials can be fine-tuned and controlled at the atomic level, with unparalleled precision on intrapore chemical environment; moreover, the unusually high pore accessibility allows for easy post-synthetic pore wall modification after the COF is synthesized. Overall, COFs combine high, permanent porosity and surface area with high thermal and chemical stability, crystallinity and customizability, making them ideal candidates for a myriad of promising new solutions in a vast number of scientific fields, with widely varying applications such as gas adsorption and storage, pollutant removal, degradation and separation, advanced filtration, heterogeneous catalysis, chemical sensing, biomedical applications, energy storage and production and a vast array of optoelectronic solutions. This review attempts to give a brief insight on COF history, the overall strategies and techniques for rational COF synthesis and post-synthetic functionalization, as well as a glance at the exponentially growing field of COF research, summarizing their main properties and introducing the numerous technological and industrial state of the art applications, with noteworthy examples found in the literature.

[Synthesis and application progress of covalent organic polymers in sample preparation for food safety analysis]

Food safety is closely related to human health and life. Contaminated foods may result in illness or poisoning. For example, perfluorinated compounds can concentrate in the human body, or they can be transferred to the baby during breastfeeding, thus leading to serious health risks. Phthalate esters may cause damage to the liver, lungs, and kidneys. Therefore, food safety has become a hot topic at a global level. Poisonous and harmful substances in foods are derived from the environment, planting or breeding, food contacting materials, and food processing, or due to unsuitable storage conditions. Residues of pesticides and veterinary drugs, organic pollutants, additives, heavy metals, and biotoxins often hamper food safety, causing diseases or even death. The diversity of available food species, complexity of the sample matrix, and lack of information about the source of pollutants render the direct determination of food contaminants difficult. Pretreatment is vital for the accurate analysis of trace toxins in foods. Optimal pretreatment can not only improve the extract efficiency and determination sensitivity, but also prevent instrument contamination. Pretreatment techniques have played an important role in trace determination for complex matrices. Pretreatment methods can be classified as solvent-based and adsorption-based methods. Adsorption-based techniques such as solid-phase extraction, magnetic solid-phase extraction, and solid-phase microextraction are simple and efficient, and hence, are widely used. In these pretreatment techniques, adsorbents play a key role in the extraction effect. In the last few years, metal organic frameworks, metal oxide materials, carbon nanotubes, graphene, and magnetic nanoparticles, as well as a combination of these materials, have been used as adsorbents. These materials are porous and have a large surface area; they are used to enrich trace targets and eliminate interferents. Covalent organic polymers (COPs) are a class of organic porous materials constructed from organic monomers via covalent bonding. Given their excellent characteristics such as light density, good stability, high surface area, structural controllability, and ease of modification, COPs are potential adsorbents. COPs are often synthesized by solvent thermal methods. However, these methods are time-consuming and require toxic solvents and harsh reaction conditions. As alternatives, room-temperature methods, mechanical chemical methods, microwave-assisted methods, and UV-assisted methods have been developed. This has facilitated the synthesis of a wide range of COPs. In this article, the recent applications of COPs in sample pretreatment for food safety analysis are reviewed. COPs can be used in solid-phase extraction by simple packing into columns, polymerization, or chemical bonding in the capillary. Magnetic compounds have been prepared by one-pot synthesis, in situ growth, in situ reduction, or coprecipitation methods and used in magnetic solid-phase extraction. Coatings of solid-phase microextraction fibers are fabricated by physical methods, chemical bonding, sol-gel methods, or in situ growth. Toxic and harmful substances in foods and foodstuffs are efficiently extracted by exploiting the high adsorbent capacities and specificity of COPs. Future development prospects and challenges in sample pretreatment are also discussed herein. There is increased focus on the development of simple, efficient, and environment-friendly methods to synthesize COPs with specific functions; further, high-throughput, sensitive analytical methods may be established. In the future, more specific COPs will be prepared in a cost-effective manner for widespread use in sample pretreatment.

Electro-enhanced solid-phase microextraction with covalent organic framework modified stainless steel fiber for efficient adsorption of bisphenol A

In this work, electro-enhanced solid-phase microextraction (EE-SPME) and covalent organic framework (COF) were adopted to improve the extraction efficiency. A conductive COF synthesized of 2,6-diaminoanthraquinone (DQ) and 1,3,5-triformylphloroglucinol (TP) was in situ bonded to the stainless steel wire via facile solution-phase approach and used as the EE-SPME fiber coating to preconcentrate a typical endocrine disruptor bisphenol A (BPA). Compared with conventional SPME, the DQTP bonded fiber coupled with EE-SPME device exhibited higher extraction efficiency and achieved extraction equilibrium within 10 min. The proposed approach based on EE-SPME and gas chromatography coupled with flame ionization detector gave a linear range of 0.05-10 μg mL^-1 and detection limit of 3 μg L^-1 (S/N = 3) with good precision (<6.7%) and reproducibility (<7.1%) spiked with 0.1, 0.5, 1.0 μg mL^-1 BPA. Quantitative determination of BPA in extracts of food packagings (mineral water bottles, milk boxes and milk tea cups) was achieved with recoveries from 88.6 to 118.0%.

Room-temperature synthesis of magnetic covalent organic frameworks for analyzing trace benzoylurea insecticide residue in tea beverages

A novel magnetic covalent organic framework (NH₂-Fe₃O₄@COF) was prepared using a simple room-temperature synthesis in this study. These magnetic particles exhibited high adsorption performance with short adsorption time (10 min) for six benzoylurea insecticides (BUs) as magnetic solid-phase extraction (MSPE) adsorbents. Quantum chemistry calculation demonstrated that adsorption mechanism was primarily attributed to strong halogen bonds between electronegative O atoms of COF and electropositive F atoms of BUs as well as potential hydrophobic effect. Wide linearities (10-1000 ng·L^-1) and low limits of detection (0.06-1.65 ng·L^-1) for six analytes were obtained via liquid chromatography-tandem mass spectrometry. Applicability of the proposed method was further evaluated by analyzing four kinds of original tea beverages. Recoveries of six BUs in spiked samples ranged from 80.1% to 108.4%.

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Covalent organic frameworks offer a molecular platform for integrating organic units into periodically ordered yet extended 2D and 3D polymers to create topologically well-defined polygonal lattices and built-in discrete micropores and/or mesopores.

Covalent organic framework Schiff base network-1-based pipette tip solid phase extraction of sulfonamides from milk and honey

In this work, a covalent organic framework Schiff base network-1 (SNW-1), was synthesized based on the Schiff base reaction between terephthalaldehyde and melamine and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and nitrogen adsorption-desorption isotherm analyses. The prepared SNW-1 was employed as pipette tip solid phase extraction adsorbent for the extraction of sulfonamides (SAs) prior to high performance liquid chromatography analysis. The parameters affecting the extraction efficiency, including the salt concentration, sample pH, amount of adsorbent, and types and volume of eluent were investigated in detail. Good linearities were obtained between the peak area and SAs concentration ranging from 5 to 500 ng mL^-1 with correlation coefficients (R²) higher than 0.9998. The limits of detection and RSDs were lower than 0.25 ng mL^-1 and 1.9 %, respectively. The developed method was further applied for the determination of SAs in milk and honey samples with recoveries in the range of 85.8 % - 118.0 % and RSDs less than 9.5 %. The results demonstrate that the SNW-1 shows great potential for the enrichment of trace SAs in complex matrices.

Preparation of sheet-like covalent organic frameworks and their application for efficient preconcentration of 4-(tert-octyl)-phenol and 4-nonylphenol in textiles

In the design of highly ordered (covalent organic frameworks) COFs with "ordered domains size and orientation" construction in a well-defined arrangement, the molecular monomers are the key factors. Here, the effect of molecular monomers on the construction of COFs has been studied, and two kinds of molecular monomers, i.e., ethanediamine (flexible amine ligand) and 4,4'-diaminobiphenyl (rigid amine ligand) have been used for developing sheet-like COFs-I and sheet-like COFs-II, respectively. Furthermore, they have been evaluated in the dispersive solid phase extraction (dSPE) procedure for textiles prior to the analysis of alkylphenol by liquid chromatography-tandem quadrupole mass spectrometry (LC-MS/MS). The results showed that, the optimal usage amount of sheet-like COFs-II used in the dSPE procedure was less than that of sheet-like COFs-I, which may be explained by much higher adsorption capacity of sheet-like COFs via hydrogen-bonding and π-π stacking interactions. Rectilinear calibration graphs were obtained for 4-(tert-octyl)-phenol (4-tOP) and 4-nonylphenol (4-NP) in the range 0.2-20 µg/kg with determination coefficient (r²) higher than 0.9990, and the limits of detection (LODs) of 4-tOP and 4-NP were 0.039 µg/kg and 0.048 µg/kg, respectively. The developed method has been successfully applied to analysis of 50 textile samples, in which 4-tOP and 4-NP were found in six samples with concentrations in the range of 1.6 μg/kg-20.9 μg/kg.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.

Synthesis of a polymeric imidazolium-embedded octadecyl ionic liquid-grafted silica sorbent for extraction of flavonoids

In this work, a polymeric imidazolium-embedded octadecyl ionic liquid (poly(1-vinyl-3-octadecylimidazolium naphthalene sulfonate))-grafted silica (poly(C₁₈VIm⁺NapSO₃^-)@SiO₂) sorbent was prepared and applied as a solid-phase extraction (SPE) sorbent in extraction of flavonoids. The synthesized poly(C₁₈VIm⁺NapSO₃^-)@SiO₂ sorbent was characterized by X-ray photoelectron spectrogram (XPS) and fourier transform infrared spectroscopy (FT-IR). The thermodynamic and kinetic adsorption models of the prepared poly(C₁₈VIm⁺NapSO₃^-)@SiO₂ sorbent towards flavonoids were discussed by nonlinear fitting adsorption curve and the results indicated the thermodynamic adsorption model in this work was tended to be Freundlich model rather than Langmuir one and the pseudo-second order model could be used to describe the dynamic adsorption process. In addition, the adsorption amounts indicated the sorbent has satisfactory extraction capabities towards flavonoids. For investigating the influence of independent variables and their interactions on the extraction efficiency, a Box-Behnken design was used for optimizing three greatly influential parameters after performing single-factor experiments. The interaction energies between flavonoids and two ionic liquids were calculated to understand the adsorption mechanism. Under the optimal conditions, a method used for determining flavonoids was developed by combining SPE technique with high performance liquid chromatography (HPLC), and the developed method exhibited low limits of detection (0.25-0.4 μg L^-1), good linearities with correlation coefficients (R²) in the range of 0.9951-0.9996 and satisfactory recoveries ranging from 83.6% to 114.1%, which confirmed the proposed method could be successfully used to determine trace flavonoids in real samples.

Recyclable magnetic covalent organic framework for the extraction of marine biotoxins

A novel procedure for the preparation of magnetic covalent organic frameworks (COFs) is reported. In situ functionalization of Fe3O4 with dopamine rapidly afforded amino-functionalized magnetic nanoparticles, which after decoration with a COF building block and subsequent COF growth gave access to magnetic composite mTpBD-Me2. The optimized synthesis conditions yielded crystalline and superparamagnetic material with no loss in surface area as compared to bulk COF. The composite material was employed for the first time in magnetic solid-phase extraction of marine biotoxins from seawater with high efficiency, where calculated maximum adsorption capacities of 812 mg g-1 and 830 mg g-1 were found for okadaic acid (OA) and dinophysistoxin-1 (DTX-1), respectively, corresponding to an increase of ∼500-fold for OA and ∼300-fold for DTX-1 as compared to the commonly used non-magnetic macroporous resins. Nearly quantitative desorption efficiency of both biotoxins was obtained using 2-propanol as solvent, rendering the composite materials recyclable with merely minor losses in adsorption capacity after five consecutive cycles of adsorption/desorption. In addition, retention of crystallinity after the adsorption cycles highlights the stability of the composite in seawater. These results illustrate the great efficiency of the novel material in biotoxin adsorption and show great promise for its application in environmental monitoring programs.

Recent advances in covalent organic frameworks (COFs) as a smart sensing material

Recent advances in covalent organic frameworks (COFs) as a smart sensing material are summarized and highlighted.

Metal ion-assisted carboxyl-containing covalent organic frameworks for the efficient removal of Congo red

Covalent organic frameworks (COFs) have been utilized as molecular sieves to adsorb or remove or separate a wide range of substances.