Determination of atmospheric particle-bound polycyclic aromatic hydrocarbons using subcritical water extraction coupled with membrane microextraction

Environmental remediation of emerging contaminants using subcritical water: A review

The continuous rise of emerging contaminants (ECs) in the environment has been a growing concern due to their potentially harmful effects on humans, animals, plants, and aquatic life, even at low concentrations. ECs include human and veterinary pharmaceuticals, hormones, personal care products, pesticides, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), organic dyes, heavy metals (HMs), and others. The world's growing population contributes to the release of many kinds of chemicals into the environment, which is estimated to be more than 200 billion metric tons annually and results in over 9 million deaths. The removal of these contaminants using conventional physical, chemical, and biological treatments has proven to be ineffective, highlighting the need for simple, effective, inexpesive, practical, and eco-friendly alternatives. Thus, this article discusses the utilization of subcritical water oxidation (SBWO) and subcritical water extraction (SBWE) techniques to remove ECS from the environment. Subcritical water (water below the critical temperature of 374.15 °C and critical pressure of 22.1 Mpa) has emerged as one of the most promising methods for remediation of ECs from the environment due to its non-toxic properties, simplicity and efficiency of application. Furthermore, the impact of temperature, pressure, treatment time, and utilization of chelating agents, organic modifiers, and oxidizing agents in the static and dynamic modes was investigated to establish the best conditions for high ECs removal efficiencies.

A multi-residue method for the analysis of organic pollutants released from atmospheric PM2.5 in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation

BACKGROUND

In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field.

RESULTS

In this work, a methodology for the analysis of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols released in simulated fluids from PM2.5 samples was developed. After a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) and a simulated body fluid (SBF, filling a dialysis membrane) to obtain in vitro inhalation bioaccessible and bioavailable fractions, respectively; compounds were determined by a vortex-assisted liquid-liquid extraction (VALLE) and a subsequent analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). Experimental conditions concerning VALLE extraction (extraction time and amount of NaCl (g)) were optimized by using a central composite design (CCD), best MS/MS transitions were selected and matrix-matched calibration combined with use of labelled subrogate standards provided high sensitivity, minimization of matrix effects and recovering losses compensation.

SIGNIFICANCE

The successful validation results obtained for most of the compounds demonstrated the effectiveness of the proposed methodology for the analysis of multi-class organic pollutants released in ALF and SBF for inhalation bioaccessibility and bioavailability assessment, respectively. Furthermore, applicability of the method was proved by analysing 20 p.m.2.5 samples, being the proposed in vitro PBET dialyzability approach for assessing organic pollutant's inhalation bioavailability applied to PM2.5 samples for the first time.

Source apportionment of PM10 and health risk assessment related in a narrow tropical valley. Study case: Metropolitan area of Aburrá Valley (Colombia)

This study investigates spatio-temporal variations of PM10 mass concentrations and associated metal(oid)s, δ13C carbon isotope ratios, polycyclic aromatic hydrocarbons (PAHs), total organic carbon (TOC) and equivalent black carbon (eBC) concentrations over a half year period (from March 2017 to October 2017) in two residential areas of Medellín (MED-1 and MED-2) and Itagüí municipality (ITA-1 and ITA-2) at a tropical narrow valley (Aburrá Valley, Colombia), where few data are available. A total of 104 samples were analysed by using validated analytical methodologies, providing valuable data for PM10 chemical characterisation. Metal(oid)s concentrations were measured by inductively coupled plasma mass spectrometry (ICP-MS) after acid digestion, and PAHs concentrations were measured by Gas Chromatography-Mass Spectrometry (GC-MS) after Pressurised Hot Water Extraction (PHWE) and Membrane Assisted Solvent Extraction (MASE). Mean PM10 mass concentration ranged from 37.0 µg m-3 to 45.7 µg m-3 in ITA-2 and MED-2 sites, respectively. Al, Ca, Mg and Na (from 6249 ng m-3 for Mg at MED-1 site to 10,506 ng m-3 for Ca at MED-2 site) were the major elements in PM10 samples, whilst As, Be, Bi, Co, Cs, Li, Ni, Sb, Se, Tl and V were found at trace levels (< 5.4 ng m-3). Benzo[g,h,i] perylene (BghiP), benzo[b + j]fluoranthene (BbjF) and indene(1,2,3-c,d)pyrene (IcdP) were the most profuse PAHs in PM10 samples, with average concentrations of 0.82-0.86, 0.60-0.78 and 0.47-0.58 ng m-3, respectively. Results observed in the four sampling sites showed a similar dispersion pattern of pollutants, with temporal fluctuations which seems to be associated to the meteorology of the valley. A PM source apportionment study were carried out by using the positive matrix factorization (PMF) model, pointing to re-suspended dust, combustion processes, quarry activity and secondary aerosols as PM10 sources in the study area. Among them, combustion was the major PM10 contribution (accounting from 32.1 to 32.9% in ITA-1 and ITA-2, respectively), followed by secondary aerosols (accounting for 13.2% and 23.3% ITA-1 and MED-1, respectively). Finally, a moderate carcinogenic risk was observed for PM10-bound PAHs exposure via inhalation, whereas significant carcinogenic risk was estimated for carcinogenic metal(oid)s exposure in the area during the sampling period.

Characterization of the external exposome and its contribution to the clinical respiratory and early biological effects in children: The PROMESA cohort study protocol

BACKGROUND

Air pollution contains a mixture of different pollutants from multiple sources. However, the interaction of these pollutants with other environmental exposures, as well as their harmful effects on children under five in tropical countries, is not well known.

OBJECTIVE

This study aims to characterize the external exposome (ambient and indoor exposures) and its contribution to clinical respiratory and early biological effects in children.

MATERIALS AND METHODS

A cohort study will be conducted on children under five (n = 500) with a one-year follow-up. Enrolled children will be followed monthly (phone call) and at months 6 and 12 (in person) post-enrolment with upper and lower Acute Respiratory Infections (ARI) examinations, asthma development, asthma control, and genotoxic damage. The asthma diagnosis will be pediatric pulmonologist-based and a standardized protocol will be used. Exposure, effect, and susceptibility biomarkers will be measured on buccal cells samples. For environmental exposures PM2.5 will be sampled, and questionnaires, geographic information, dispersion models and Land Use Regression models for PM2.5 and NO2 will be used. Different statistical methods that include Bayesian and machine learning techniques will be used for the ambient and indoor exposures-and outcomes. This study was approved by the ethics committee at Universidad Pontificia Bolivariana.

EXPECTED STUDY OUTCOMES/FINDINGS

To estimate i) The toxic effect of particulate matter transcending the approach based on pollutant concentration levels; ii) The risk of developing an upper and lower ARI, based on different exposure windows; iii) A baseline of early biological damage in children under five, and describe its progression after a one-year follow-up; and iv) How physical and chemical PM2.5 characteristics influence toxicity and children's health.

Isolation and quantification of synthetic cannabinoid receptor agonists in human urine using membrane-assisted solvent extraction followed by liquid chromatography-tandem mass spectrometry

The global market for new psychoactive substances (NPSs) continues to expand, and the range of drugs available on the market has probably never been wider. Synthetic cannabinoids (SCRAs) constitute the largest family of NPSs, and they go unnoticed during illicit drug market control and during routine toxicological-forensic analysis. Membrane-assisted solvent extraction (MASE) has been a novelty proposed for the simultaneous extraction of SCRAs, and urine has been selected as a model forensic-clinical sample. Isolated SCRAs were further determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS). An optimised sample pre-treatment procedure consists of using 400 μL of n-hexane as an extraction phase placed inside a polypropylene (PP) membrane, adjusting the donor phase (urine) at a pH value of 5.9. Extraction was assisted by mechanical (orbital-horizontal) stirring in a temperature-controlled chamber at room temperature for 20 min. n-Hexane extracts were evaporated to dryness and re-suspended in 100 μL of mobile phase, which leads to a pre-concentration factor of 50. Method validation showed analytical recoveries higher than 80% for most SCRAs and repeatability (inter-day and intra-day assays) with RSD values lower than 20%. The proposed method was found to be selective and sensitive and limits of quantification (LOQs) between 0.10 and 1.0 μg L^-1 were achieved.

Research Progress of Polycyclic Aromatic Hydrocarbons Pretreatment Methods and Application of Computer Simulation Technology for Prediction and Degradation of Electrochemical Concentration Detection

Polycyclic aromatic hydrocarbons (PAHs) are a class of organic compounds that are composed of aromatic rings containing only carbon and hydrogen atoms. They are one of the widespread environmental pollutants in the world. In recent years, many scholars have focused on the inhibition, formation mechanism, content of active components, and biodegradation effect of polycyclic aromatic hydrocarbons. They summarized the research progress of pretreatment methods for detection, but rarely discussed the experimental dataset for comprehensive analysis of pollution sources and the impact of different pretreatment technologies on the extraction of different substrates. What is more, computer simulation has not been mentioned. In this study, the pollution sources of polycyclic aromatic hydrocarbons (PAHs) are reviewed, and the related applications of various pretreatment methods such as gel permeation chromatography (GPC) are summarized. Finally, the computer simulation of the response surface method is introduced. The concentration of polycyclic aromatic hydrocarbons is tested or predicted by combining the neural network with the alternating trilinear decomposition (ATLD) algorithm, artificial population algorithm (ABC), and hierarchical genetic algorithm (HGA). Its future development trend is discussed and prospected, which provides a reference for solving the pollution problem. We look forward to providing help for the follow-up research of scholars in this field.

Accumulation of polycyclic aromatic hydrocarbons in the devitalized aquatic moss Fontinalis antipyretica: From laboratory to field conditions

This work aims to test the feasibility of a Fontinalis antipyretica devitalized moss clone to uptake and accumulate polycyclic aromatic hydrocarbons (PAHs) from surface waters. To assess the capability of the devitalized clone to accumulate PAHs, in the laboratory, moss was placed in water and spiked with increasing concentrations of 16 PAHs, and under field conditions, the moss was transplanted to 22 sites of Galicia (Spain) rivers. In general, PAH concentrations in water samples were lower than the maximum allowable concentrations from Directive 2013/39/EU, so the sampling sites did not show water PAH contamination. The exponential accumulation kinetic in the laboratory trial highlights a good capability of the devitalized moss clone to accumulate total PAHs. In field experiments, the hydrogeological conditions and the low emission sources caused low concentrations of PAHs in the water system and, consequently, in the transplants, although an enrichment can be observed for several PAHs. Overall, the devitalized clone of F. antipyretica can uptake and accumulate PAHs in water and may be useful in bioremediation strategies.

Palm oil biodiesel: An assessment of PAH emissions, oxidative potential and ecotoxicity of particulate matter

This work assessed the impact of fuelling an automotive engine with palm biodiesel (pure, and two blends of 10% and 20% with diesel, B100, B10 and B20, respectively) operating under representative urban driving conditions on 17 priority polycyclic aromatic hydrocarbon (PAH) compounds, oxidative potential of ascorbic acid (OP^AA), and ecotoxicity through Daphnia pulex mortality test. PM diluted with filtered fresh air (WD) gathered in a minitunel, and particulate matter (PM) collected directly from the exhaust gas stream (W/oD) were used for comparison. Results showed that PM collecting method significantly impact PAH concentration. Although all PAH appeared in both, WD and W/oD, higher concentrations were obtained in the last case. Increasing biodiesel concentration in the fuel blend decreased all PAH compounds, and those with 3 and 5 aromatic rings were the most abundant. Palm biodiesel affected both OP^AA and ecotoxicity. While B10 and B20 exhibited the same rate of ascorbic acid (AA) depletion, B100 showed significant faster oxidation rate during the first four minutes and oxidized 10% more AA at the end of the test. B100 and B20 were significantly more ecotoxic than B10. The lethal concentration LC50 for B10 was 6.13 mg/L. It was concluded that palm biodiesel decreased PAH compounds, but increased the oxidative potential and ecotoxicity.

Magnetic solid phase extraction of heterocyclic aromatic hydrocarbons from environmental water samples with multiwalled carbon nanotube modified magnetic polyamido-amine dendrimers prior to gas chromatography-triple quadrupole mass spectrometer

Present study described a sensitive and efficient method for determination of heterocyclic aromatic hydrocarbons using multiwalled carbon nanotubes modified magnetic polyamido-amine dendrimers (MNPs@PAMAM-Gn@MWCNTs) as adsorbent for magnetic solid-phase extraction (MSPE) coupled with gas chromatography-triple quadrupole mass spectrometer (GC-MS/MS). Some pivotal parameters including PAMAM generation, adsorbent dosage, adsorption time, elution time and volume, pH and humic acid concentration were investigated to achieve the best adsorption efficiencies. Under the optimal conditions, 7-methylquinoline, dibenzothiophene and carbazole had good linearity in the concentration range of 0.005-20 μg L ^- 1, 9-methylcarbazole, 4-methyldibenzothiophene and 4,6-dimethyl dibenzothiophene had good linearity in the concentration range of 0.001-20 μg L ^- 1. All the correlation coefficients were higher than 0.996. The detection limits of the targets were in the range of 2.2 × 10^-4-1.8 × 10^-3 μg L ^- 1 with precisions less than 8.28% (n = 6). The enrichment factors were in the range of 141-147. The spiked recoveries were in the range of 87.0%-115.1% (n = 3). These results indicated that the method could be a reliable alternative tool for monitoring trace heterocyclic aromatic hydrocarbons in environmental water samples.

A Review on Occurrence of Pesticides in Environment and Current Technologies for Their Remediation and Management

Pesticides are the chemicals used to prevent plant diseases, weeds, pests and to enhance the quality of the food products. The uniqueness of their chemical structure, and/or their interactions with the environment characterize the nature of pesticides. In most scenarios, the end users such as farmers and consumers, who know the serious effects of pesticides cannot translate this awareness into their practice. The mobility, bioavailability of pesticides in soils (atmosphere, water bodies) is based upon their absorption and desorption mechanisms from soil particles. Pesticides have harmful effects in the soil ecosystem, and mankind (which affects biological molecules, tissues, and organs resulting in acute or chronic disorders). It affects humans of all ages including prenatal. These pollutants, when released into the water bodies affects the aquatic systems. The water molecules in the river are affected by the accumulation of these toxic contaminants with its alkaline pH and heavy metals which could adversely affect the health of flora and fauna. This article discusses the scientific literature on various remediation technologies available for the safer use of pesticides. The limitations and benefits of chemically polluted soil using microorganisms and other biological methods have been discussed. However, future development measures are still needed to ensure full implementation of these methods to save the environment.