Stir membrane liquid phase microextraction of tetracyclines using switchable hydrophilicity solvents followed by high-performance liquid chromatography

Exploration of biomass-derived carbon dots based on chestnut shell for the sensitive detection of phosphate and tetracycline hydrochloride

Phosphate pollution leads to the deterioration of water quality, posing a serious threat to human health. Tetracycline hydrochloride (TC), a class of broad-spectrum bacteriostatic agents, has garnered attention due to its extensive use and potential toxicity. Therefore, developing a highly selective and sensitive fluorescent probe for the detection of phosphates and TC is of significant importance. Herein, to enhance the conversion and utilization of high-value biomass waste, biomass-derived carbon dots (LZ-NCDs) emitting green fluorescence with a quantum yield of 44 % were synthesized in a one-step hydrothermal process using chestnut shell biomass waste as a carbon source and nitrogen doping technology. Based on the dynamic quenching mechanism, a highly sensitive method for effectively identifying PO43- using LZ-NCDs fluorescence probe was constructed, with a linear range of 0.1-10 µmol/L and a detection limit of 43.0 nmol/L. A quenched fluorescent probe, LZ-NCDs for the determination of TC, was fabricated through the synergistic effects of inner filter effect and static quenching, exhibiting a linear range from 0.05 to 10 µmol/L with a detection limit of 16.8 nmol/L. The successful determination of PO43- and TC in actual samples was achieved. The two different quenching mechanisms indicate that LZ-NCDs are expected to become potential sensing materials for the real-time monitoring of PO43- and TC in organisms and food, which is very important for our health.

Eco-friendly solvents in liquid-liquid microextraction techniques for biological and environmental analysis: a critical review

In recent years, green solvents have emerged as promising alternatives in the field of analytical chemistry, replacing conventional organic solvents known for their toxicity, volatility, and flammability. The combination of these solvents with liquid-liquid microextraction techniques has facilitated the development of simpler, faster, more economical, and environment-friendly methodologies for the analysis of samples of varying complexity. This review discusses the fundamental physicochemical properties and advantages of using deep eutectic solvents, ionic liquids, switchable-hydrophilicity solvents, supramolecular solvents, and surfactants as extractants. Furthermore, analytical methods based on liquid-liquid microextraction techniques developed in the last 5 years for the determination of organic compounds and metals in biological and environmental samples are presented and discussed, highlighting their applications and benefits to improve analytical performance and sustainability.

Effervescent-assisted Liquid-phase Microextraction Employing Switchable Hydrophilicity Solvent for the Determination of Cortisol and Testosterone in Oral Fluid by High-Performance Liquid Chromatography-Diode Array Detection

Cortisol and testosterone are important biomarkers for diagnosing complex disorders, including polycystic ovary syndrome and Cushing's syndrome, where symptomatology usually overlaps with other prevalent disorders. This work proposes, for the first time, an analytical method based on a switchable hydrophilicity solvent as an extraction phase for the determination of cortisol and testosterone in oral fluid (OF) by high-performance liquid chromatography with diode-array detection. The optimized extraction conditions consisted of 1000 µL of OF, 100 µL of decanoic acid solution (65 mg/mL), 170 µL of Na2CO3, 900 µL of H2SO4 and 150 µL of acetonitrile for dilution. The method was validated, and coefficients of determination higher than 0.9926, the limit of detection of 4.55 ng/mL and the limit of quantification of 15.00 ng/mL were obtained. Intra-day precision varied from 5.6% to 11.9%, inter-day precision ranged from 6.1% to 13.5%, and relative recoveries ranged from 98.9% to 104.6% for cortisol, and 89.1% to 103.9% for testosterone. This methodology was successfully applied to five OF samples from volunteers. Moreover, the greenness of this methodology was evaluated based on the sample preparation metric of sustainability achieving a global score of 7.37 which can be considered sustainable.

Application of zwitterionic ionic liquid-based capsule phase microextraction for the HPLC-UV determination of doxycycline in human urine samples

Herein, we describe the utilization of an ionic liquid (IL)/Carbowax 20 M-functionalized sol-gel sorbent for the capsule phase microextraction of doxycycline in authentic human urine samples. This green sample preparation method combines stirring and filtration in a single, standalone sample preparation device, streamlining the sample preparation process. Additionally, it provides rapid extraction kinetics and high extraction efficiency. The experimental conditions (i.e. sorbent type, sample pH and volume, extraction time, ionic strength, elution solvent, and volume) affecting the extraction efficiency of the analyte were studied and optimized. The method was linear in the range of 0.1 - 5.0 μg/mL with a coefficient of determination higher than 0.995. The achieved LOD was found to be 0.02 μg/mL while the lower limit of quantitation (LLOQ) was 0.1 μg/mL. The IL/Carbowax 20 M-functionalized microextraction capsules were reusable at least 30 times for urine samples. The relative recoveries (% RR) ranged between 93.4 - 115.9 % while the precision (expressed as % RSD) was better than 8.1 % in all cases. The robustness of the microextraction procedure and the instrumental HPLC method were separately investigated using Plackett-Burman experimental designs. The analytical protocol demonstrated cost-effectiveness, ease of handling, and speed, leading to increased sample throughput. The green character of the developed method was evaluated using the Green Analytical Procedure Index (GAPI) and Blue Applicability Grade Index (BAGI). Finally, the method's applicability was demonstrated by analyzing authentic human urine samples after oral administration of a doxycycline-containing pharmaceutical formulation.

Removal of two antidepressant active pharmaceutical ingredients from hospital wastewater by polystyrene-coated magnetite nanoparticles-assisted batch adsorption process

This study employed simple polystyrene-coated magnetite nanoparticles (PS@MNPs)-assisted batch adsorption process for the removal of two antidepressant active ingredients (amitriptyline HCl and sertraline HCl) from hospital wastewater. Dominant parameters of the adsorption process including pH, adsorbent amount, and contact period were optimized through the univariate approach to enhance the adsorption efficiency. Upon reaching optimum adsorption conditions, equilibrium experiments were performed by spiking the adsorbates in hospital wastewater in the concentration range of 100-2000 μg/L. The concentrations of the adsorbates in the effluent were calculated using the matrix-matching calibration strategy to enhance the accuracy of quantification. A validated switchable solvent-based liquid phase microextraction (SS-LPME) method was employed to enrich the two active pharmaceutical ingredients (APIs) prior to sensitive determination with GC-MS (gas chromatography-mass spectrometry). The equilibrium data were mathematically modeled employing the Langmuir and Freundlich adsorption isotherm models. The isotherm constants were calculated, and the results showed that both the isotherm models fitted well with the experimental data. The efficient and simple batch adsorption strategy reported in this study was successfully employed to remove amitriptyline HCl and sertraline HCl from hospital wastewater at low concentrations.

Determination of Tetracycline Antibiotics in Milk by Solid-Phase Extraction Using a Coordination Polymer Based on Cobalt Trimesinate as a Sorbent

The coordination polymer was obtained based on cobalt trimesinate. It was characterized by elemental analysis, IR spectroscopy, X-ray diffraction analysis and scanning electron microscopy. The polymer was studied as a sorbent for solid-phase extraction of tetracycline antibiotics. Cobalt trimesinate had a high adsorption capacity (400 mg/g). Antibiotic adsorption followed the pseudo-second-order kinetic model and the Freundlich isotherm model. The process proceeded spontaneously, as indicated by the calculated thermodynamic parameters. The resulting coordination polymer has good stability and recyclability. The possibility of using cobalt trimesinate for the determination of tetracycline in various milk samples was investigated. This work holds great promise for the development and application of a cobalt trimesinate-based coordination polymer for use in sample preparation to replace the time-consuming vacuum evaporation procedure with a relatively simple solid-phase extraction procedure.

Application of magnetic solid-phase extraction for sensitive determination of anticancer drugs in urine by means of diamino benzidine tetrachlorohydrate modified magnetic nanoparticles

BACKGROUND

The analysis of drug active molecules and residues in the treatment of cancer is important for the sustainability of human life and therapeutic effects. For this purpose, a new magnetic sorbent was developed to use in solid phase extraction prior to conventional high-performance liquid chromatography (HPLC) analysis of Paclitaxel (PAC) and Gemcitabine (GEM) molecules.

METHODS

In this study, a separation and pre-concentration approach based on magnetic solid phase extraction (MSPE) was proposed for PAC and GEM by means of using a newly synthesized magnetic sorbent. After the MSPE procedure, an HPLC system with a diode array detector (DAD) was used to analyze trace amounts of PAC and GEM anticarcinogenic drugs in urine samples. Surface modification of magnetic Fe₃O₄ nanoparticles was carried out by diaminobenzidinetetrachloro hydrate (DABTC) for the first time and a useful sorbent was obtained for MSPE experiments.

RESULTS

In the proposed method, PAC and GEM molecules were retained on the c in the presence of a pH 5.0 medium and desorbed to 300 μL of acetonitrile: methyl alcohol (1:1) eluent phase before HPLC-DAD analysis. Under the optimized conditions, the limit of detection (LOD) values for PAC and GEM were 1.38 and 1.44 ng mL^-1 while the enhancement factor for PAC and GEM were 139.5 and 145.3, respectively. The relative standard deviations (RSD %) for PAC and GEM were below 3.50% in inter-day repeated experiments by means of model solutions containing 100 ng mL^-1 drug active ingredients.

CONCLUSIONS

Synthesis and characterization of DABTC-Fe₃O₄ nanoparticles were performed using suitable methodologies. Optimization of MSPE was done step by step. And finally, the developed method was successfully applied to urine samples with quantitative recoveries in the range of 99.0% and 105.0%.

Direct solidification of switchable-hydrophilicity salicylic acid: A design for the on-site dispersive liquid-liquid microextraction of benzoylurea insecticides in water and honey samples

This study describes the development of a fully manual method for on-site dispersive liquid-liquid microextraction based on the direct solidification of switchable-hydrophilicity salicylic acid (on-site DLLME-DSSA) coupled with high-performance liquid chromatography with an ultraviolet detector (HPLC-UVD) and its utilization for the detection of benzoylurea insecticides (BUs) in water and honey samples. Salicylic acid (SA), a switchable hydrophilic aromatic acid, was used as an extraction solvent. It can be converted into the hydrophobic/hydrophilic forms in pH-changeable solutions, facilitating facile and effective dispersion and phase separation. Moreover, the melting point of SA (significantly higher than room temperature) enables its direct solidification without an ice-water bath, facilitating its collection by filtration. The dispersion, separation, and collection of the extraction solvent were carried out entirely in a plastic syringe without requiring special apparatus or additional energy. Univariate and response surface analyses were used to optimize various parameters of the on-site DLLME-DSSA method. Under optimal conditions, the limits of determination (LODs) were 1.50 µg L^-1 and 0.03-0.09 mg kg^-1 in water and honey, respectively. The relative standard deviations (RSDs) for inter-day (n = 5) and intra-day (n = 5) precision were ≤8.4%, whereas the extraction recoveries and enrichment factors for the BUs ranged from 67.0 to 97.1% and 29 to 34, respectively. Furthermore, the proposed method was used for the on-site extraction and laboratory detection of BUs from real water and honey samples. Theoretical analyses indicated non-covalent interactions (such as hydrogen bonds, electrostatic interactions, van der Waals forces, and π-π interactions) to be the main driving force for extraction. This study introduces a switchable hydrophilic aromatic acid capable of direct solidification into on-site DLLME for the first time, opening new frontiers in the development of on-site sample pretreatment methods.

UiO-66-NH2 based fluorescent sensing for detection of tetracyclines in milk

In this work, a fluorescent sensor based on a zirconium-based metal organic framework was prepared for the detection of tetracyclines (TCs) in milk. The UiO-66-NH2 fluorescent sensor was synthesized by a simple microwave-assisted method with 2-aminoterephthalic acid and zirconium chloride as precursors. In the presence of target TCs, the synergistic effect of the inner filter effect (IFE) and photo-induced electron transfer (PET) was responsible for the fluorescence quenching of UiO-66-NH2, and the fluorescence sensor showed a rapid fluorescence quenching response (5 min) to target TCs. The proposed UiO-66-NH2 sensor had good sensitivity and selectivity, and under the optimal conditions possessed detection limits of 0.449, 0.431, and 0.163 μM for tetracycline (TET), oxytetracycline (OTC), and doxycycline (DOX), respectively. Besides, the UiO-66-NH2 sensor was successfully applied to the quantitative detection of TCs in milk samples with reasonable recoveries of 93.26-115.17%, and the detection results achieved from the as-fabricated fluorescence sensing assay were consistent with those of high-performance liquid chromatography (HPLC), indicating the potential applicability of the UiO-66-NH2 sensor for detecting TCs in actual food samples.

Tea Tree Oil Nanoemulsion Potentiates Antibiotics against Multidrug-Resistant Escherichia coli

Extensive efforts are underway to overcome the rising prevalence of antibiotic resistance. Combination therapy may be a potential method to treat multidrug-resistant (MDR) bacterial infections. In this study, tea tree essential oil (TTO) nanoemulsion (nanoTTO) was used in combination with antibiotics to kill microbes. Results showed that nanoTTO enhanced the activities of multiple antibiotics against MDR Escherichia coli (E. coli), and its antimicrobial activity was not changed against bacteria that were cultured in the presence of nanoTTO for 30 passages. Further studies to visualize and quantify intracellular antibiotics concentrations identified that nanoTTO increased the drug accumulation in MDR E. coli by disrupting outer and inner membranes and inhibiting the AcrAB-TolC efflux pump involved in membrane permeability. In addition, nanoTTO was effective in enhancing antibiotic efficacy in the Galleria mellonella infection model and mouse peritonitis model, suggesting a potential strategy against MDR bacterial infections.

Enrichment of tetracycline residues from honey samples using carrier-mediated hollow fibre liquid-phase micro-extraction and quantification by LC-Q-TOF/MS

BACKGROUND

In this study, development and validation of a simple, miniaturized and, environmentally friendly carrier-mediated three-phase hollow-fibre liquid-phase micro-extraction (HFLPME) technique was investigated for the enrichment of tetracycline residues in honey samples. The extracts were analysed using UV-visible spectrophotometry and liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-Q-TOF/MS). Parameters affecting the extraction efficiency of HFLPME such as pH of the donor and acceptor solutions, salt addition, agitation speed and extraction time were optimized.

RESULTS

The calibration curves showed good linearity, in the range of 1-100 μg kg^-1 with correlation coefficients ranging between 0.9943 and 0.9992, under the optimized conditions. Recoveries of blank honey samples at three spiking levels (1, 10 and 20 μg kg^-1 ) ranged from 81.2% to 107.5%. Relative standard deviations for the precision of the method were less than 15.0%. Limits of detection and limits of quantification were in the range of 0.0861-0.2628 μg kg^-1 and 0.2610-0.7964 μg kg^-1 , respectively. Finally, the proposed method was successfully applied in the extraction of five tetracyclines from honey samples. Doxycycline residue detected in one of the commercial honey samples was below the limit of quantification.

CONCLUSION

Because of the advantages offered by HFLPME, this method can be employed as an alternative to conventional extraction techniques for the clean-up and pre-concentration of antibiotics in complex matrices, including food samples. © 2021 Society of Chemical Industry.

Construction of core-shell Fe3O4@GO-CoPc photo-Fenton catalyst for superior removal of tetracycline: The role of GO in promotion of H2O2 to •OH conversion

A novel core-shell structured Fe₃O₄@GO-CoPc magnetic catalyst, which is with magnetite (Fe₃O₄) as the core, graphene oxide (GO) as the interlayer and cobalt-phthalocyanine (CoPc) as the shell, was successfully prepared and used as a heterogeneous photo-Fenton catalyst for tetracycline (TC) degradation in this work. The core-shell structure of the catalyst was confirmed by XRD, FTIR, SEM and TEM. BET and magnetic hysteresis loops measurements indicated that Fe₃O₄@GO-CoPc catalyst owned large specific surface area and could be easily recovered under an external magnetic field. Meanwhile, the experimental results of TC degradation demonstrated that the photo-Fenton efficiency of Fe₃O₄@GO-CoPc was excellent. When the reaction time was 120 min, TC could be degraded almost completely in the photo-Fenton system with Fe₃O₄@GO-CoPc. The high photo-Fenton catalytic activity of Fe₃O₄@GO-CoPc could be resulted from the effective transfer of photo-generated electrons between CoPc and Fe₃O₄ by GO. Moreover, the main reaction species, •OH, O₂•-, ¹O₂ and h⁺, were verified by the analysis of active species in this system. Finally, the mechanism analyses and quantitative analysis results of active species indicated that the introduction of GO accelerated the cycle between Fe(II) and Fe(III) as well as improved the effective utilization of H₂O₂ (the efficiency of conversion of H₂O₂ to •OH).

Preconcentration and determination of five antidepressants from human milk and urine samples by stir bar filled magnetic ionic liquids using liquid-liquid-liquid microextraction-high performance liquid chromatography

A sensitive and straightforward liquid-liquid-liquid microextraction method was developed to preconcentrate and cleanup antidepressants, including mirtazapine, venlafaxine, escitalopram, fluoxetine, and fluvoxamine, from biological samples before analyzing with high-performance liquid chromatography. The essential novelty of this study is using magnetic ionic liquids as the extraction phase in the lumen of hollow fiber and preparing a liquid magnetic stir bar. In the method, polypropylene hollow fiber was utilized as the permeable membrane for the analyte extraction. Six magnetic ionic liquids consisting of the transition metal and rare earth compounds were synthesized and then injected hollow fiber lumen as acceptor phase to extract the antidepressants. Besides, 3-pentanol as a water-immiscible solvent was impregnated in the hollow fiber wall pores. The effective factors in the method were optimized with the central composition design. The resultant calibration curves were linear over the concentration range of 0.8-400.0 ng mL^-1 (R² ≥ 0.996). The method displayed the proper detection limit (0.11-0.24 ng mL^-1 ), the reasonable limit of quantification (≤0.79 ng mL^-1 ), wide linear ranges, high preconcentration factors (≥294.3), and suitable relative standard deviation (2.31-5.47%) for measuring antidepressant medications. Analysis of human milk and urine samples showed acceptable recoveries of 96.5-103.8% with excellent relative standard deviations lower than 5.95%. This article is protected by copyright. All rights reserved.