Hydrophobic deep eutectic solvents as extractants for the determination of bisphenols from food-contacted plastics by high performance liquid chromatography with fluorescence detection

Alcohol-based hydrophobic deep eutectic solvents and ultrasound-assisted liquid phase microextraction followed by GC-MS for the extraction and analysis of organophosphorus pesticides in the blood of farmers

Organophosphorus pesticides (OPPs) are a group of pesticides that are most widely used in the agricultural sector, and farmers are exposed to these chemicals more than other members of society. In this work, an environmentally friendly, simple, and safe ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) method using alcohol-based hydrophobic deep eutectic solvents (HDESs) followed by gas chromatography-mass spectroscopy (GC-MS) was developed for the extraction and determination of OPPs in the blood of farmers studied in Ravansar cohort. DESs synthesized from thymol as hydrogen bond donor (HBD) and aliphatic alcohols as hydrogen bond acceptor (HBA) have been used as extractants. Under optimal experimental conditions, the reproducibility of the method based on 7 replicate measurements of 10 µg L-1 of OPPs in blood samples was in the range of 1.4-3.8%. The method showed a linearity in the range of 0.01-150 µg L-1. The limits of detection and limits of quantification were between 0.003 and 0.02 µg L-1 and 0.01-0.05 µg L-1, respectively. The matrix effect and accuracy of the method were confirmed by spiking different amounts of OPPs in real blood samples and obtaining relative recoveries in the range of 91-112%. The results showed that the concentration of OPPs in the case group was significantly higher than in the control group, which is because the case group was exposed to OPPs during the spraying of agricultural products.

Novel ferrofluid based on hydrophobic deep eutectic solvents for separation and analysis of trace estrogens in environmental water and urine samples

A novel ferrofluid prepared from a hydrophobic deep eutectic solvent (DES) and Fe3O4@graphite composite materials was introduced as a green microextraction medium for the separation and enrichment of trace estrogens in real samples. It was found that the ferrofluid greatly improved the capacity and selectivity of target analytes, benefiting from the enrichment of both DES and Fe3O4@graphite composite materials. Using a combination of high-performance liquid chromatography-fluorescence detection (HPLC-FLD) and vortex-assisted liquid-liquid microextraction (VALLME), a new method was established for simultaneous rapid processing and accurate determination of three estrogens (estradiol [E2], estriol [E3], and ethinyl estradiol [EE2]) in environmental water and urine samples. Key parameters affecting the extraction efficiency were optimized using a single-factor approach and response surface methodology. Under optimal conditions, this method yielded a low limit of detection (1.01 ng L-1, 3.03 ng L-1, and 25.0 ng L-1 for EE2, E2, and E3, respectively), wide linear range (3-200,000 ng L-1), high enrichment factors (9.81-47.2), and satisfactory recovery (73.8-129.0%). Compared with traditional analytical techniques, this method avoids the use of volatile toxic organic extraction solvents and cumbersome phase separation operations.

Deep eutectic solvents for the determination of endocrine disrupting chemicals

The harmful effects of endocrine disrupting chemicals (EDCs) to humans and other organisms in the environment have been well established over the years, and more studies are ongoing to classify other chemicals that have the potential to alter or disrupt the regular function of the endocrine system. In addition to toxicological studies, analytical detection systems are progressively being improved to facilitate accurate determination of EDCs in biological, environmental and food samples. Recent microextraction methods have focused on the use of green chemicals that are safe for analytical applications, and present very low or no toxicity upon disposal. Deep eutectic solvents (DESs) have emerged as one of the viable alternatives to the conventional hazardous solvents, and their unique properties make them very useful in different applications. Notably, the use of renewable sources to prepare DESs leads to highly biodegradable products that mitigate negative ecological impacts. This review presents an overview of both organic and inorganic EDCs and their ramifications on human health. It also presents the fundamental principles of liquid phase and solid phase microextraction methods, and gives a comprehensive account of the use of DESs for the determination of EDCs in various samples.

An effervescence-assisted microextraction for parabens in foodstuffs based on deep eutectic solvent composed of methyltrioctyl ammonium chloride and decanoic acid

An efficient and ecofriendly effervescence-assisted emulsification microextraction approach based on hydrophobic deep eutectic solvent (EA-EME-DES) was developed for the sensitive chromatographic determination of parabens (i.e., methyl-, ethyl-, propyl- and butylparaben) in foodstuffs. The DES extractant consisted of methyltrioctyl ammonium chloride (MTAC) and decanoic acid (DecA) (1:3, mol/mol), and had high hydrophobicity, solubility and stability. During the microextraction procedure, sodium carbonate was introduced to facilitate the dissolution of parabens in aqueous solution, DES dispersion and phase separation by enhancing solution pH and generating CO2 bubbles. The developed method exhibited satisfactory linearity (R2 ≥ 0.9986), detection limits (0.01-0.03 μg/g), quantitation limits (0.04-0.09 μg/g), recoveries (87.8% to 111%, with RSDs of 0.8% to 5%) and negligible matrix effects, hence it had remarkable effectiveness and applicability in determining parabens in complex foodstuffs.

Standardization of the analytical procedure based on deep eutectic solvent for the extraction and measurement of tricyclic antidepressants drugs in post-mortem blood samples

Measuring drugs in post-mortem blood samples is one of the most important challenges in forensic medicine. The development of sensitive analytical techniques for the measurement of drugs in biological samples is of great use in forensic medicine. In this research an easy, safe and environmental friendly vortex-assisted liquid phase microextraction (VA-LPME) based on deep eutectic solvent (DES) followed by high performance liquid chromatography-ultraviolet detector (HPLC-UV) was developed for the extraction, preconcentration and analysis of tricyclic antidepressants drugs (TCAs) in post-mortem blood samples. DES synthesized from thymol as hydrogen bond acceptor (HBA) and ethylene glycol (EG) as hydrogen bond donor (HBD) with a molar ratio of 2:1 was used as an extractant. After adding DES to the sample solution, the resulting mixture was vortexed in order to increase the contact surface and increase the extraction efficiency. Next, phase separation was done using centrifugation. Some effective parameters on the extraction were studied and optimized. Under the optimum conditions, intra- and inter-day %RSDs of the method based on 7 replicate measurements of 100 μg L-1 of TCAs in blood samples were in the range of 2.4-5.1 and 3.7-6.8 %, respectively. The analytical performance of the method showed linearity over the concentration of 3-500 μg L-1 with the detection limits ranging from 1.0-2.0 μg L-1. The trueness of the method was confirmed by spiking different concentrations of TCAs in real blood samples and obtaining relative recoveries in the range of 91.2-108 %.

Synthesis and characterization of pH-responsive deep eutectic solvent followed by HPLC for trace determination of bisphenol A in water samples

A microextraction based on pH-responsive deep eutectic solvent combined with high-performance liquid chromatography was developed for the separation, preconcentration, and determination of bisphenol A in water samples. Five deep eutectic solvents were prepared using thymol (hydrogen bond acceptor) and 6-, 8-, 9-, 10-, and 12-carbon carboxylic acids (hydrogen bond donor), and were used as extraction solvent. Herein, by alkalinizing the environment, phase transition takes place, and by adding acid, phase separation and extraction of analytes occur simultaneously. Some important parameters on the extraction such as deep eutectic solvent type, molar ratio of deep eutectic solvent components, deep eutectic solvent volume, potassium hydroxide concentration, hydrochloric acid volume, extraction time, and salt addition were optimized. Under the optimum conditions, intra- and interday precisions of the method based on seven replicate measurements of 10 μg L-1 of bisphenol A in water samples were 2.2% and 4.3%, respectively. The analytical performance of the method showed linearity over the concentration of 0.05-50 μg L-1 with the detection limit of 0.02 μg L-1 . The accuracy of the method was confirmed by spiking different concentrations of bisphenol A in real water samples and obtaining relative recoveries in the range of 92.5%-105.2%.

In Situ Formation of a Relatively Transparent Ion-Associate Liquid Phase from an Aqueous Phase and Its Application to Microextraction/High-Performance Liquid Chromatography-Fluorescence Detection of Bisphenol A in Water

The design of a simple approach enabling the detection of bisphenol A (BPA) in water samples without the need for large amounts of solvents is of utmost importance. This paper reports a simple method for the separation, concentration, and quantification of BPA in water samples using high-performance liquid chromatography with fluorescence detection (HPLC-FLD) after its microextraction into an in situ formed organic ion-associate (IA) liquid phase (LP). Novel IA phase components without conjugated double bonds, such as benzene rings, were investigated. Ethylhexyloxypropylamine hydrochloride and sodium dodecyl sulfate solutions were added to the water samples to form IAs. The aqueous phase and ion-associate liquid phase (IALP) were separated by centrifugation. The aqueous phase was removed, and the liquid phase was recovered and measured using HPLC-FLD or HPLC-electrochemical detection (ECD). The concentrated phase (IALP) had a relatively low viscosity and could be injected directly into the chromatograph without dissolving it in organic solvents. The detection limits for BPA by HPLC-FLD and HPLC-ECD were 0.009 and 0.3 µg L-1, respectively.

Microextraction of Tigecycline Using Deep Eutectic Solvents and Its Determination in Milk by LC-MS/MS Method

The occurrence of tigecycline (TGC), a new first glycylcycline antibiotic residues in food products harmfully influences potential human consumers health. Therefore, analysts are forced to develop new microextraction methods connected with modern extractants for effective isolation of this compound. For this purpose, deep eutectic solvents (DES) as the extraction media were used. Liquid-liquid microextraction (LLME) of tigecycline from milk samples with application of the hydrophobic deep eutectic solvents: decanoic acid:thymol (1:1), thymol:camphor (2:1), dodecanoic acid:menthol (2:1), and dodecanoic acid:dodecanol (1:1) was developed. The studied samples were subjected to a deproteinization process using trichloroacetic acid solution and acetonitrile. The optimal microextraction parameters, molar ratio of DES components, amount of extraction solvents, pH of milk sample, shaking, and centrifugation time, were chosen. Tigecycline in the obtained microextracts of deep eutectic solvents was analyzed using a liquid chromatographic technique connected with a tandem mass spectrometry (LC-MS/MS) system. The limits of detection and quantification values for TGC determination followed by DES-LLME-LC-MS/MS method were in the 1.8 × 10^-11 mol L^-1 (0.01 μg kg^-1) to 4.0 × 10^-9 mol L^-1 (2.28 μg kg^-1) and 5.5 × 10^-11 mol L^-1 (0.03 μg kg^-1) to 1.2 × 10^-8 mol L^-1 (6.84 μg kg^-1) ranges, respectively. The RSD values of precision were in the range 1.4-7.8% (intraday) and 5.4-11.7% (interday). The developed procedures were used for the determination of tigecycline in different bovine milk samples.

β-Cyclodextrin functionalized magnetic polyamine-amine dendrimers for high enrichment and effective analysis of trace bisphenolic pollutants in beverages

Bisphenols (BPs) are typical endocrine disruptors, which can cause great effects on environmental, organisms and human health. In this study, β-Cyclodextrin (β-CD) functionalized polyamidoamine dendrimers-modified Fe₃O₄ nanomaterials (MNPs@PAMAM (G3.0)@β-CD) were facilely synthesized. It exhibited good adsorption capacities for BPs, which was utilized to construct a sensitive tool in combination with high performance liquid chromatography for monitoring BPs such as bisphenol A (BPA), tetrabromobisphenol A (TBBPA), bisphenol S (BPS), bisphenol AF (BPAF) and bisphenol AP (BPAP) in beverage samples. The factors affecting the enrichment were examined such as generation of adsorbent, dosage of adsorbent, type and volume of eluting solvent, elution time and pH value of sample solution. The optimal parameters for enrichment was as follows: dosage of adsorbent, 60 mg; adsorption time, 50min; sample pH, pH7; elutent, 9 mL mixture of methanol and acetone(1:1); elution time, 6min; sample volume, 60 mL. The experimental results demonstrated that the adsorption conformed to pseudo-second-order kinetic model and Langmuir adsorption isotherm model. The results showed the maximum adsorption capacities of BPS, TBBPA, BPA, BPAF and BPAP were 131.80 μgg^-1, 139.84 μgg^-1, 157.08 μgg^-1, 142.11 μgg^-1 and 134.23 μgg^-1, respectively. Under optimal conditions, BPS had good linear relationship over range from of 0.5-300 μgL^-1, and the linear ranges of BPA, TBBPA, BPAF and BPAP ranged from 0.1 to 300 μgL^-1. The limits of detection (S/N = 3) for BPs were good in range of 0.016-0.039 μgL^-1. The spiked recoveries of target bisphenols (BPs) in beverages were approving over range from 92.3% to 99.2%. The established method possessed merits of easy to operate, good sensitivity, rapidness as well as environmental friendliness, and which earned great application potential for the enrichment and detection of trace BPs in practical samples.

Hydrophobic Deep Eutectic Solvents as Greener Substitutes for Conventional Extraction Media: Examples and Techniques

Deep eutectic solvents (DESs) are multicomponent designer solvents that exist as stable liquids over a wide range of temperatures. Over the last two decades, research has been dedicated to developing noncytotoxic, biodegradable, and biocompatible DESs to replace commercially available toxic organic solvents. However, most of the DESs formulated until now are hydrophilic and disintegrate via dissolution on coming in contact with the aqueous phase. To expand the repertoire of DESs as green solvents, hydrophobic DESs (HDESs) were prepared as an alternative. The hydrophobicity is a consequence of the constituents and can be modified according to the nature of the application. Due to their immiscibility, HDESs induce phase segregation in an aqueous solution and thus can be utilized as an extracting medium for a multitude of compounds. Here, we review literature reporting the usage of HDESs for the extraction of various organic compounds and metal ions from aqueous solutions and absorption of gases like CO₂. We also discuss the techniques currently employed in the extraction processes. We have delineated the limitations that might reduce the applicability of these solvents and also discussed examples of how DESs behave as reaction media. Our review presents the possibility of HDESs being used as substitutes for conventional organic solvents.

A Critical Review of Emerging Hydrophobic Deep Eutectic Solvents' Applications in Food Chemistry: Trends and Opportunities

Due to their low cost, biodegradability, and ease of preparation, deep eutectic solvents (DESs) are considered promising green alternatives to conventional solvents, as exploiting green solvents has been a research focus for achieving sustainable development goals. Most DESs in published studies are hydrophilic. On the other hand, the DES's hydrophilicity restricts its practical applicability to just polar molecules, which is a vital disadvantage to this extractant. Hydrophobic DES (HDES) has been developed as a new extractant adept at extracting nonpolar inorganic and organic compounds from aqueous systems. Although there has been little research on HDESs (HDES publications account for <10% of DES), specific intriguing applications have been discovered, requiring investigation and comparisons. As a result, this review covers the applications of emerging HDES in detecting pesticide residues, food additives, contaminants in food packaging, heavy metals, separation and extraction processes in food. According to the available literature, HDESs have the potential to overcome the limitations of hydrophilic DESs and be used in a broader range of applications in food with greater efficiency, which has received little attention. HDES is expected to substitute a lot of harmful organic extractants used for analytical reasons (food chemistry) in the future. Besides, the limitations of HDES were reviewed, and future studies were provided. This will serve as a reference for green chemistry advocates and practitioners in food science who want to minimize pollution and improve efficiency and benefit from the further development of HDESs.

Facile liquid colorimetric sensor using high-density deep eutectic solvent for trace detection and speciation of iron in milk

An efficient colorimetric sensor was developed using a high-density deep eutectic solvent (HD-DES) for the trace detection and speciation of iron in various milk samples. A liquid colorimetric probe was fabricated by dissolving ferrozine (FZ) in HD-DES prepared from TBABr and PBA. The prederivatization of Fe²⁺ via complexation with FZ on the HD-DES/FZ probe provided the [Fe(FZ)₃]^4- complex, which led to a color change from pale yellow to purple before it was simultaneously extracted by HD-DES. The Fe³⁺ content was calculated by subtracting the amount of Fe²⁺ from the total Fe content following the reduction of Fe³⁺ to Fe²⁺ by L-ascorbic acid in an acid buffer. Under the optimized conditions, the proposed colorimetric sensor exhibited appreciable linearity in the concentration range of 0.003-0.04 mg L^-1, a low limit of detection (0.95 µg L^-1), high enrichment factor (50), and outstanding repeatability. The liquid colorimetric probe was successfully applied for the determination and speciation of iron in milk samples, and the results were compared with those obtained using the standard atomic absorption spectrometry method. Moreover, quantitative analysis was performed on a smartphone using the Image J application to estimate the color intensity change, which eliminated the requirement of sophisticated scientific instruments.

New low viscous hydrophobic deep eutectic solvents for the ultrasound-assisted dispersive liquid-liquid microextraction of endocrine-disrupting phenols in water, milk and beverage

In the present work, several new hydrophobic deep eutectic solvents (HDESs) were prepared with quaternary ammonium salts as hydrogen bond acceptors (HBAs) and salicylate esters as hydrogen bond donors (HBDs). Then, the obtained HDESs were used as extraction solvents to establish an ultrasound-assisted dispersive liquid-liquid microextraction method combined with high-performance liquid chromatography-ultraviolet detection technique for the determination of four endocrine-disrupting phenols (EDPs) compounds. One of the obtained HDESs composed of tetrabutylammonium chloride (N₄₄₄₄Cl) and methyl salicylate possessed a viscosity of 89.28 mPa•s lower than most reported ionic HDESs (>200 mPa•s), and the low viscous HDES was selected as the optimal extraction solvent. Several key parameters affecting the extraction efficiency were investigated, including the type and volume of HDES, ultrasound time, sample solution pH and salt addition. Under the optimized experimental conditions, the proposed method had good coefficients of determination (R² > 0.9976) in the linear range of 0.5-400 µg•L^-1, the limits of quantification and limits of detection respectively were 0.5-2.5 µg•L^-1 and 0.25-1 µg•L^-1, and the recoveries were in the range of 81.79-109.82%. Finally, the method was used for the preconcentration and determination of EDPs in different samples, including bottled water, tea beverage and milk.

Application of d-SPE before SPE and HPLC-FLD to Analyze Bisphenols in Human Breast Milk Samples

In this study, we propose a simple, cost-effective, and sensitive high-performance liquid chromatography with fluorescence detection (HPLC-FLD) for the simultaneous determination of seven bisphenols (bisphenol F (BPF), bisphenol E (BPE), bisphenol B (BPB), BADGE (bisphenol A diglycidyl ether), BADGE∙2H₂O, BADGE∙H₂O, BADGE∙2HCl) in human breast milk samples. The dispersive solid phase extraction (d-SPE) coupled with solid phase extraction (SPE) procedure performed well for the majority of the analytes with recoveries in the range 57–88% and relative standard deviations (RSD%) of less than 9.4%. During the d-SPE stage, no significant matrix effect was observed thanks to the application of different pairs of salts such as zirconium-dioxide-based sorbents (Z-Sep or Z-Sep +) and primary secondary amine (PSA) or QuEChERS Enhanced Matrix Removal-Lipid (EMR-Lipid) and PSA. The method limits of quantification (mLOQs) for all investigated analytes were set at satisfactory low values in the range 171.89–235.11 ng mL⁻¹. Analyte concentrations were determined as the average value from human breast milk matrix samples. The results show that the d-SPE/SPE procedure, especially with the application of EMR-Lipid and PSA, could be used for further bisphenol analyses in human breast milk samples.

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent for the preconcentration and separation of selenium in water and food samples prior to HG-AAS detection

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent (ULLME-LV-HDES) was proposed for the preconcentration and separation of selenium prior to HG-AAS detection. Six different DESs were prepared for the extraction of selenium. Quercetin was used complexing agent for Se(IV) ions. Various analytical parameters such as pH, quercetin amount, DES type and its volume, sonication time, sample volume were optimized. Tolerance limits of anion, cation and transition metal ions were studied. Preconcentration and enhancement factor were found 62.5 and 121. Under the optimum conditions, limit of detection was found 0.25 ng L^-1 with calibration range of 0.8-120 ng L^-1. Relative standard deviation was found 3.2%. The accuracy of the method was confirmed with certified reference materials (NIST 1567a Wheat flour and NIST 1548a Typical diet). Finally, the developed method was successfully applied to food and water samples.

Novel recyclable acidic hydrophobic deep eutectic solvents for highly efficient extraction of calcium dobesilate in water and urine samples

Deep eutectic solvents (DESs) have been considered to be one of the most promising green alternatives of conventional volatile solvents for liquid-liquid separation. However, acidic hydrophobic DESs have been less studied although they are of great importance for the extraction of compounds which are unstable in alkaline conditions. In this study, a novel family of acidic hydrophobic deep eutectic solvents was designed and prepared from methyl trioctyl ammonium chloride and a series of haloacetic acids. For the first time, the obtained DESs were used for extraction and determination of calcium dobesilate, which is an extensively used medicine for treating vascular diseases, but it can be easily oxidized under alkaline and neutral conditions. The factors influencing extraction process including pH, temperature, extract time, inorganic salts and organic coexistence were systematically investigated. It is found that these DESs exhibited outstanding extraction performance towards calcium dobesilate. The extraction equilibrium time was only 3 min in a wide range of pH (1.2-9.2) at room temperature and the extraction capacity was up to 504 mg/g. The detection limit of calcium dobesilate extracting from water samples was 0.05 μg/L and the limit of quantification was 0.5 μg/L. A variety of inorganic salts with the concentration up to 1.0 mol/L and common coexisting organic compounds, such as glucose and starch, with the concentration more than 1000 times higher than the target analyte had no obvious impact on the extraction efficiency. The relative recovery for real samples ranged from 93.2% to 108.6%. Furthermore, the DESs could be recycled and regenerated through back extraction. After fifteen cycles, the extraction efficiency was still up to 99%. Finally, the extraction and back extraction mechanism was discussed in detail.

Multivariate optimization of low-temperature cleanup followed by dispersive solid-phase extraction for detection of Bisphenol A and benzophenones in infant formula

A simple and effective analytical method to determine six contaminants, including five benzophenones (BP, BP-1, BP-3, BP-8, and BP-12) and bisphenol A (BPA) in infant formulas was developed in this study. For this, a sequential experimental design was used to optimize the extraction and cleanup method using low temperature partition (LTP) combined with dispersive solid phase extraction (dSPE). The effect of primary secondary amine (PSA), sodium chloride (NaCl), graphitized carbon black (GCB), octadecyl (C18), strong anion exchanger (SAX), water, acetonitrile (ACN) and, ultrasound (US) time were evaluated using a sequential design of experiments including a Plackett-Burman, a central composite rotatable design, and the Derringer and Suich's tool. The method was validated, and it showed a limit of quantification varying from 0.06 to 2 mg.kg^-1, good precision (< 20% RSD), and recovery (52-106%). The method proposed was applied to twenty-five samples of commercial infant formulas.

Determination of bisphenol A: Old problem, recent creative solutions based on novel materials

Bisphenol A is a synthetic compound widely used in industry, in the production of polycarbonate, epoxy resins, and thermal paper, among others. Its annual production is estimated at millions of tons per year, demonstrating its importance. Despite its wide application in various everyday products, once in the environment (due to its disposal or leaching), it has high toxicity to humans and animal life, and this problem has been well known for years. Given this problem, many researchers seek alternatives for its monitoring in matrices such as natural water, waste, food, and biological matrices. For this, new advanced materials have been developed, characterized, and applied in creative ways for the preparation of samples for the determination of bisphenol A. This article aims to present some of these important and recent applications, describing the use of molecularly imprinted polymers, metal and covalent organic frameworks, ionic liquids and magnetic ionic liquids, and deep eutectic solvents as creative solutions in sample preparation for the long-standing problem of bisphenol A determination.

Aptamer-enhanced fluorescence determination of bisphenol A after magnetic solid-phase extraction using Fe3O4@SiO2@aptamer

Bisphenol A (BPA) is used as a stabilizing agent in many food packaging plastics and is a known endocrine-disrupting chemical that can alter the development of mammary glands, affect egg cells, and cause chromosomal defects. However, the pretreatment of traditional assays for detecting BPA is difficult. In this work, a novel aptamer functionalized magnetic adsorbent was developed and combined with magnetic solid-phase extraction (MSPE) for the selective enrichment of BPA. First, magnetic silica-coated Fe₃O₄ microspheres (Fe₃O₄@SiO₂) were synthesized by the sol-gel method, and functional magnetic nanoparticles (Fe₃O₄@SiO₂@Apt) were formed by modifying with nucleic acids. In the presence of BPA in a MSPE system, the nucleic acid aptamer can specifically capture the target BPA. After magnetic separation, the Apt/BPA composite was eluted, and we observed enhanced fluorescence with the Apt/BPA composite that was formed. Our results showed that this method allowed a limit of detection of 0.05 ng mL^-1.