Enhanced microextraction of endocrine disrupting chemicals adsorbed on airborne fine particulate matter with gas chromatography-tandem mass spectrometric analysis

Investigating a new approach for magnetic ionic liquids: Dispersive liquid-liquid microextraction coupled to pyrolysis gas-chromatography-mass spectrometry to determine flame retardants in sewage sludge samples

This study addresses the analysis of emerging contaminants, often using chromatographic techniques coupled to mass spectrometry. However, sample preparation is often required prior to instrumental analysis, and dispersive liquid-liquid microextraction (DLLME) is a viable strategy in this context. DLLME stands out for its ability to reduce sample and solvent volumes. Notably, dispersive liquid-liquid microextraction using magnetic ionic liquids (MILs) has gained relevance due to the incorporation of paramagnetic components in the chemical structure, thereby eliminating the centrifugation step. A pyrolizer was selected in this work to introduce sample onto the GC column, since the MIL is extremely viscous and incompatible with direct introduction through an autosampler. This study is the first to report the use of a DLLME/MIL technique for sample introduction through a pyrolizer in gas chromatography coupled to mass spectrometry (GC-MS). This approach enables the MIL to be compatible with gas chromatography systems, resulting in optimized analytical and instrument performance. The analysis of polybrominated diphenyl ether flame retardants (PBDEs) was focused on the PBDE congeners 28, 47, 99, 100, and 153 in sewage sludge samples. The [P6,6,6,14+]2[MnCl42-] MIL was thoroughly characterized using UV-Vis, Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy, as well as thermal analysis. In the chromatographic method, a pyrolyzer was used in the sample introduction step (Py-GC-MS), and critical injection settings were optimized using multivariate approaches. Optimized conditions were achieved with a temperature of 220 °C, a pyrolysis time of 0.60 min, and an injection volume of 9.00 μL. DLLME optimization was performed through central compound planning (CCD), and optimized training conditions were achieved with 10.0 mg of MIL, 3.00 μL of acetonitrile (ACN) as dispersive solvent, extraction time of 60 s, and volume of a sample of 8.50 mL. Precision was observed to range from 0.11 % to 12.5 %, with limits of detection (LOD) of 44.4 μg L-1 for PBDE 28, 16.9 μg L-1 for PBDE 47 and PBDE 99, 33.0 μg L-1 for PBDE 100 and 375 μg L-1 for PBDE 153. PBDE 28 was identified and analyzed in the sludge sample at a concentration of 800 μg L-1. The use of MIL in dispersive liquid-liquid microextraction combined with pyrolysis gas chromatography-mass spectrometry enables identification and quantification of PBDEs in sewage sludge samples at concentrations down to the µg L-1 level.

A functionalized glass fiber as the adsorbent for efficient analysis of endocrine disruptors in aqueous environments

Estrogens and bisphenols are typical endocrine disruptors (EDs) that pose a potential hazard to the human body due to their widespread presence in aqueous environments. In this study, a β-cyclodextrin porous crosslinked polymer (β-CD-PCP) was prepared in-situ on a glass fiber surface by a nucleophilic substitution reaction. An effective and sensitive solid phase microextraction method using functionalized glass fiber with β-CD-PCP coating as the adsorbent was established for the detection of 11 EDs in a water environment. The β-CD-PCP was in-situ prepared on a glass fiber surface by a nucleophilic substitution reaction. The β-CD-PCP successfully separated five estrogens (ESTs) and six bisphenols (BPs) through hydrophobic and π-π interactions. The conditions affecting extraction were optimized. Under the optimized conditions, the ESTs obtained a high enrichment effect (1795-2328), low limits of detection (0.047 µg L-1) and a good linearity range (0.2-15.0 µg L-1). Furthermore, the spiked recoveries of analyte ESTs in aqueous environments were between 82.9-115.7 %. The results indicated that the prepared functionalized glass fibers exhibited good adsorption properties, and the established analytical method was reliable for monitoring trace ESTs and BPs in aqueous environments.

Sensor technologies for the detection and monitoring of endocrine-disrupting chemicals

Endocrine-disrupting chemicals (EDCs) are a class of man-made substances with potential to disrupt the standard function of the endocrine system. These EDCs include phthalates, perchlorates, phenols, some heavy metals, furans, dimethoate, aromatic hydrocarbons, some pesticides, and per- and polyfluoroalkyl substances (PFAS). EDCs are widespread in the environment given their frequent use in daily life. Their production, usage, and consumption have increased many-fold in recent years. Their ability to interact and mimic normal endocrine functions makes them a potential threat to human health, aquatics, and wild life. Detection of these toxins has predominantly been done by mass spectroscopy and/or chromatography-based methods and to a lesser extent by advanced sensing approaches such as electrochemical and/or colorimetric methods. Instrument-based analytical techniques are often not amenable for onsite detection due to the lab-based nature of these detecting systems. Alternatively, analytical approaches based on sensor/biosensor techniques are more attractive because they are rapid, portable, equally sensitive, and eco-friendly. Advanced sensing systems have been adopted to detect a range of EDCs in the environment and food production systems. This review will focus on advances and developments in portable sensing techniques for EDCs, encompassing electrochemical, colorimetric, optical, aptamer-based, and microbial sensing approaches. We have also delineated the advantages and limitations of some of these sensing techniques and discussed future developments in sensor technology for the environmental sensing of EDCs.

Magnetic dispersive solid phase extraction based on carbonized cellulose-ferromagnetic nanocomposite for screening phthalate esters in aqueous samples

In this work, a sorbent of the carbonized cellulose-ferromagnetic nanocomposite has been proposed for the magnetic dispersive solid phase extraction of some plasticizers in aqueous samples. Carbonized cellulose nanoparticles were prepared by treatment of cellulose filter paper with concentrated sulfuric acid and then loaded on Fe₃O₄ nanoparticles using coprecipitation. This sorbent is compatible with aqueous samples and can be considered as a viable sorbent for extraction of plasticizers from aqueous samples. In this study, magnetic dispersive solid phase extraction is followed by a dispersive liquid-liquid microextraction method. This combination makes the proposed approach as an efficient clean-up method with high enrichment factors for the selected analytes. The enriched analytes are monitored by gas chromatography equipped with a flame ionization detector. Parameters affecting the method efficiency were investigated in details. Under the optimized extraction conditions, limits of detection could reach up to of 0.15-0.50 µg L^-1. The satisfactory enrichment factors of 286-403 were obtained, and the extraction recoveries were found to be in the range of 57-80%. Relative standard deviations were in the range of 3-7% for intra-day and inter-day precisions for six replicate extractions at 25 µg L^-1 of each plasticizer. Calibration curves were linear in wide ranges with coefficients of determination ≥ 0.995. Eventually, efficiency of the prepared sorbent was confirmed by the extraction of some plasticizers from real samples including fruit juices, mineral water, injection solution, cola, and yoghourt drink packed in plastic containers.

Phthalic acid esters and adipates in herbal-based soft drinks: an eco-friendly method

Phthalic acid esters (PAEs) and adipates are plasticizers with high applicability in several products and building materials (e.g. cosmetics, packing) very persistent in the environment, features which render them ubiquitous pollutants. These substances can contaminate food through the environment (water, air, and soil) and/or migration from packaging materials, which creates a health concern due to their toxicity. This paper describes an eco-friendly dispersive liquid-liquid microextraction (DLLME) procedure to extract five phthalates and bis(2-ethylhexyl) adipate (DEHA) from bottled herbal-based beverages followed by GC-MS/MS quantification. The method showed low limits of detection (5.0-13 μg L^-1) and quantification (20-35 μg L^-1), good inter- and intraday precision (RSD < 19%), and recoveries ranging from 82 to 111%. It was applied to 16 real samples, of which 13 showed the presence of at least one of the analytes under study. Additionally, an exposure assessment was performed, and resulted in a hazard quotient less than 1 (HQ < 1) for all analytes. Therefore, PAEs and DEHA found in samples do not pose a health issue.