Air at hydrophobic surfaces and kinetics of three phase contact formation

Synergistic Effects of the Superhydrophilic and Superhydrophobic Components on the Antifreezing Performances of Latex Particles and Anti-Icing Properties of Latex Films

The development of new materials for antifreezing and anti-icing applications is a big challenge in industry and academic area. Inspired by the antifreeze proteins, latex particles with superhydrophilic zwitterionic shells and superhydrophobic cores are synthesized by reversible addition-fragmentation chain transfer emulsion polymerization, and the applications of the latex particles in antifreezing and anti-icing applications are investigated. In antifreezing study, the critical aggregate temperature (CAT) of the latex particles decreases, and the separation of the melting and freezing temperature of ice increases with the particle concentration. Enzyme molecules can be cryopreserved in the particle solution, and their bioactivities are well maintained. Latex particles are casted into latex films with dynamic surfaces. Anti-icing performances, including antifrosting properties, freezing delay time, and ice adhesion strengths, are studied; and the water-treated latex films present stronger anti-icing properties than other films, due to the synergistic effects of the superhydrophilic and superhydrophobic components. In addition, latex particles with zwitterionic shells and poly(n-butyl methacrylate) cores, and latex particles with small molecular surfactant on the surfaces are synthesized. The antifreezing performances of the latex particles and anti-icing properties of the latex films are compared.

Dynamic surfaces of latex films and their antifouling applications

Latex polymer particles have been widely used in industry and everyday life. For decades the fabrication of "smart" latex film from latex particles has been a great challenge due to the difficulty in the synthesis of the functional latex particles by traditional emulsion polymerization using small molecular surfactants. In this manuscript, a simple and environmentally-friendly approach to the fabrication of "smart" latex films with dynamic surfaces is reported. Latex particles with poly(n-butyl methacrylate) (PnBMA) in the cores and zwitterionic poly-3-[dimethyl-[2-(2-methylprop-2-enoyloxy) ethyl]azaniumyl]propane-1-sulfonate (PDMAPS) in the shells are synthesized by reversible addition-fragmentation chain transfer (RAFT) mediated surfactant-free emulsion polymerization. The kinetics for the emulsion polymerization is studied, and the latex particles are analyzed by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and dynamic light scattering (DLS). Latex films are prepared by casting aqueous solutions of the latex particles at temperatures above the glass transition temperature (Tg) of PnBMA. On the dried latex film, the hydrophobic PnBMA blocks occupy the top surface; after water treatment, the hydrophilic PDMAPS blocks migrate to the surface. A change in the surface hydrophilicity results in a change in the water contact angle of the latex film. A mechanism for the formation of the dynamic surface structure is proposed in this research. Antifouling applications of the latex films are investigated. Experimental results indicate that the water-treated latex film is able to efficiently inhibit protein adsorption and resist bacterial adhesion.

Nanoscale Investigation into Dynamics of Thin Liquid Films during Bouncing and Attachment of Rising Air Bubbles on Hydrophilic and Hydrophobic Surfaces

Investigations on bouncing and attachment of free-rising air bubbles on hydrophobic surfaces have been limited to side-view, high-speed photography of the bubble-plate attachment process. In this work, an investigation of the dynamics as well as stability of thin liquid films (TLFs) between free-rising air bubbles and quartz surfaces was performed using a newly developed multiple-wavelength synchronized reflection interferometry microscopy (SRIM) technique. The effect of surface hydrophobicity on both the stability and critical rupture thickness of TLFs was investigated. Results showed that the TLF ruptured at a critical rupture thickness of 100-1000 nm or beyond during bubble's impact on hydrophobic quartz surfaces. The critical rupture thicknesses varied depending on the surface hydrophobicity as well as surface asperity. A higher surface hydrophobicity, in general, contributed to a higher critical rupture thickness. In addition, the effect of n-octanol on the stability of the TLFs was investigated. Results showed that film stability increased with increasing the concentration of n-octanol, which was accompanied by a significant decrease in the critical rupture thickness. The present result illustrates, for the first time, the dynamics of TLFs on hydrophobic surfaces under a dynamic condition compared with previous studies under a quasi-equilibrium condition. The information revealed from the present work has a significant implication to many industrial applications, including froth flotation and other biological and semiconductor applications.

Fibrous and Spherical Aggregates of Ovotransferrin as Stabilizers for Oleogel-Based Pickering Emulsions: Preparation, Characteristics and Curcumin Delivery

This study aimed to explore the effects and mechanisms of differently shaped aggregates of ovotransferrin (OVT) particles on oleogel-based Pickering emulsions (OPEs). Medium-chain triglyceride oil-based oleogels were constructed using beeswax, and their gel-sol melting temperatures were investigated. Atomic force microscopy confirmed that both OVT fibrils and OVT spheres were successfully prepared, and the three-phase contact angle measurements indicated that fibrous and spherical aggregates of OVT particles possessed great potential to stabilize the OPEs. Afterward, the oil-in-water OPEs were fabricated using oleogel as the oil phase and OVT fibrils/spheres as the emulsifiers. The results revealed that OPEs stabilized with OVT fibrils (FIB-OPEs) presented a higher degree of emulsification, smaller droplet size, better physical stability and stronger apparent viscosity compared with OPEs stabilized with OVT spheres (SPH-OPEs). The freeze–thaw stability test showed that the FIB-OPEs remained stable after three freeze–thaw cycles, while the SPH-OPEs could barely withstand one freeze–thaw cycle. An in vitro digestion study suggested that OVT fibrils conferred distinctly higher lipolysis (46.0%) and bioaccessibility (62.8%) of curcumin to OPEs.

Comparison and Mechanism Analysis of Three-Phase Contact Formation onto Hydrophilic/Hydrophobic Mineral Surfaces in the Presence of Cationic/Anionic Surfactants during Flotation Process

This article presents the dynamic process of the three-phase contact (TPC) formation by colliding bubbles onto muscovite and talc surfaces in water and two types of solutions including cationic CTAC surfactant (cetyltrimethyl ammoniumchloride) and anionic NaOL surfactant (sodium oleate). The TPC formation process was observed through the high-speed camera between bubbles and layered silicate minerals (hydrophilic muscovite and hydrophobic talc). It was found that the rupture of the liquid film between the bubbles and the mineral surface is a prerequisite for TPC formation. In the case of muscovite, TPC was formed only with cationic CTAC, and as the surfactant concentration increased, the time needed for TPC formation was shortened. Due to electrostatic repulsion, TPC did not occur in water and NaOL. However, for talc, TPC occurred both in water and in surfactant solutions. In contrast to muscovite, the time of TPC formation on the talc surface was prolonged with the increase in the surfactant concentration. It was concluded that hydrophobic attraction and electrostatic attraction between mineral surfaces and bubbles can significantly promote the localized foam film rupture, which was the main reason for the TPC appearance in water and surfactants. For the hydrophilic muscovite, CTAC adsorption improved the surface hydrophobicity; I3/I1 in fluorescence spectroscopy increased, and the micro-polarity faded, making TPC formation need more time. However, for the natural hydrophobic talc, the increasing surfactant adsorption decreased I3/I1 values and enhanced the local micro-polarity, causing the extension of time for TPC. Therefore, TPC formation for different minerals resulted from different reasons.

The effects of water purity on removal of hydrophobic substances from solid surfaces without surfactants

HYPOTHESIS

Detergents used in everyday life for cleaning and washing are a source of water pollution and can have a negative effect on human health and the environment. To reduce their negative impact, a new trend of using only purified water for washing and cleaning applications is emerging. A scientific basis of this method needs to be established, as its mechanisms and the efficiency should be better understood.

EXPERIMENTS

In this work, we investigate the effect of water purity on the removal of hydrophobic films from solid surfaces using quartz crystal microbalance with dissipation monitoring (QCM-D) and gravimetric experiments. We compared the cleaning efficiency of TAP water, two grades of purified water, NaCl solution and SDS solution.

FINDINGS

The QCM-D results show that both grades of purified water remove more than 90% of Vaseline deposited of the surface while tap water only 75%. SDS solution fully removes the deposited layer. Gravimetric experiments with removal of olive oil from hydrophilic and hydrophobic surfaces also indicate higher efficiency of purified water grades. Contact angle experiments show that pure water facilitates roll-up mechanism of cleaning. We suggest that due to lower ionic strength, purified water increases electrostatic repulsion and promotes the cleaning process.

Highly hydrophobic polytetrafluoroethylene particle immobilization via polydopamine anchor layer on nitric oxide releasing polymer for biomedical applications

Biomedical surface-associated infections and thrombus formation are two major clinical issues that challenge patient safety and patient the fate of a medical device in the body . Single platform multifunctional surfaces are critical to address both these indwelling medical device-related problems. In this work, bio-inspired approaches are employed to fabricate a polymer composite with a versatile surface that can reduce bacterial infections and platelet adhesion in vitro. In the first bio-inspired approach, the functionality of nitric oxide (NO) produced by endothelial cell lining of blood vessels is mimicked through incorporation of S-nitroso-N-acetylpenicillamine (SNAP) within a CarboSil-2080A™ (CarboSil) polymer composite matrix. The second approach involves utilizing mussel adhesive chemistry, via polydopamine (PDA) to immobilize polytetrafluoroethylene (PTFE) particles on the polymer composite surface. The PTFE coating facilitates a decrease in wettability by making the polymer composite surface highly hydrophobic (contact angle ca. 120°). The surface of the fabricated polymer composite , CarboSil SNAP-PTFE, had a cobblestone-like structured appearance as characterized through scanning electron microscopy (SEM). Water contact angle (WCA) and surface tension measurements indicated no significant coating losses after 24 h under physiological conditions. NO surface flux was measured and analyzed for 5 days using a chemiluminescence-based nitric oxide analyzer and was found to be within the physiological range. CarboSil SNAP-PTFE reduced adhered bacteria (99.3 ± 0.5% for Gram-positive S. aureus and 99.1 ± 0.4% for Gram-negative E. coli) in a 24 h in vitro study. SEM analysis showed the absence of biofilm formation on CarboSil SNAP-PTFE polymer composites, while present on CarboSil in 24 h exposure to S. aureus. Platelet adhesion was reduced by 83.3 ± 4.5%. Overall, the results of this study suggest that a combination of NO-releasing CarboSil with PTFE coating can drastically reduce infection and platelet adhesion.

The role of the pulp-froth interface on particle detachment and selectivity

The region between the pulp and the froth also known as pulp/froth interface in mineral flotation processes separates the pulp from the froth. Various researchers suggest particle detachment occurs around this region significantly affecting mineral recovery and grade. One of the causes pointed out is sudden deceleration of bubble-particle aggregate upon collision with the interface while another theory suggests detachment to be caused by bubble coalescence. A possible cause of divergence in views may be in the different methods of investigation employed. Though, more than several researchers indicate that detachment occurs, it is not conclusive whether kinetic energy changes or bubble coalesce or a combination of the two is responsible for detachment if any. Thus, this review examines and presents work that has been done on the role of the pulp-froth interface on particle detachment and selectivity. The review also considers the behaviour of a bubble with various interface as found in literature with a view of inferring the dominant cause of detachment at the interface.

Influence of synthetic wastewater on entrapped air on the isotactic and atactic polypropylene microplastic surfaces

The municipal wastewater collection system is recognized as an initial point of interaction between microplastics (MPs) and the urban wastewater matrix. The raw wastewater contains a wide variety of organic and inorganic substances including chemicals and heavy metals. However, the fate of MPs in urban sewer systems is not yet well understood. In this work two types of virgin polypropylene (PP) samples, isotactic (iPP) and atactic (aPP), were exposed to two synthetic wastewater solutions in order to study their effects on the physical properties of the hydrophobic polymer surfaces. Particular attention was paid to the pollution adhesion at the air-liquid-solid interfaces of the surface air pockets entrapped on the polymer surfaces. The first wastewater solution consists of mixed fat, oil and grease (FOG) - surfactant and another which is an exclusively contained wastewater surfactant. The interaction experiment over a period of 10 min between the polymer's air pocket and solutions indicated that the size of the bubble in the mixed FOG-surfactant solution increased more pronouncedly for iPP (%152) in contrast to aPP (%31) and was also compared with the greater surface roughness of the polymers. The size variation of the spherical cap on the immersed polymer surfaces were measured between 17 µm and 85 µm using image processing techniques while the data was analyzed by the Young-Laplace equation. The corresponding technical surface roughness of the polymers, the surface tension of the liquids and their air/water contact angle on the flat polymer surfaces were also measured. The results of this study indicated that surface air pockets influence the adsorption capacity of MPs and thus their buoyancy and contamination potential.

Stochastic induction time of attachment due to the formation of transient holes in the intervening water films between air bubbles and solid surfaces

HYPOTHESIS

Bubble attachment to hydrophobic solid surfaces is influenced by the liquid film instability. Inclusion of transiently formed holes within the film rather than the so-called hydrophobic force in the theory is expected to better describe and explain film rupture and triple contact line formation in the bubble-surface attachment process. The significance of surface hydrophobicity and hole formation renders the stochastic nature of the induction time of attachment.

EXPERIMENTS

A combination of high-speed video microscopy and theoretical analysis was applied to investigate the induction time of attachment and critical film thickness of air bubbles rising freely perpendicularly to silica surfaces of different hydrophobicities.

FINDINGS

Film rupture occurred statistically for shorter induction times and thicker films on the more hydrophobic surface, rejecting the conjecture of hydrophobic force. Computed results of the critical base radius of the transient holes causing film rupture were merged together nicely, independently of surface hydrophobicity. The paper sheds light on the significance of hydrophobicity on the attachment process by means of a novel and easily implemented methodology, without relying on the debatable hydrophobic force.

Curcumin-PVP Loaded Electrospun Membranes with Conferred Antibacterial and Antitumoral Activities

Electrospun membranes containing curcumin were prepared from poly(L-co-D,L-lactic) acid and polyvinylpyrrolidone. The effect of curcumin concentration on the solution viscosity and the morphology of fiber was studied. Curcumin solubility in aqueous solutions was enhanced by the formation of curcumin/polyvinylpyrrolidone water-soluble complex. Curcumin physico-chemical and therapeutic properties within the membranes were preserved upon UV-Vis light irradiation, as a part of the membranes sterilization. The biomaterials showed antibacterial activity against pathogenic microorganisms such as Staphylococcus aureus and Candida albicans. In-vitro experiments against HeLa and Graffi tumor cells and white blood cells (peritoneal macrophages and spleen lymphocytes) revealed potential biomedical application of the membranes.

Effect of contact angle and contact angle hysteresis on the floatability of spheres at the air-water interface

The floatability of solid particles on the water surface governs many natural phenomena and industrial processes including film flotation and froth flotation separation of coal and valuable minerals. For many years, the contact angle (CA) has been postulated as the key factor in determining the particle floatability. Indeed, the maximum force (tenacity) supporting the flotation of fine spheres was conjectured to occur when the apical angle of the contact circle is equal to the contact angle. In this paper, the model predictions are reviewed and compared with experimental results. It is shown that CA can be affected by many physical and chemical factors such as surface roughness and chemical heterogeneity and can have a range of values known as the CA hysteresis. This multiple-valued CA invalidates the available theories on the floatability of spheres. Even the intuitive replacement of CA by the advancing (maximum) CA in the classical theories can be wrong. A few new examples are also reviewed and analyzed to demonstrate the significance of CA variation in controlling the particle floatability. They include the pinning of the contact line at the sharp edge, known as the Gibbs inequality condition, and the nearby interaction among floating particles, known as lateral inter-particle interaction. It is concluded that our quantitative understanding of the floatability of real particles being irregular and heterogeneous both morphologically and chemically is still far from being satisfactory.

Recent experimental advances for understanding bubble-particle attachment in flotation

Bubble-particle interaction is of great theoretical and practical importance in flotation. Significant progress has been achieved over the past years and the process of bubble-particle collision is reasonably well understood. This, however, is not the case for bubble-particle attachment leading to three-phase contact line formation due to the difficulty in both theoretical analysis and experimental verification. For attachment, surface forces play a major role. They control the thinning and rupture of the liquid film between the bubble and the particle. The coupling between force, bubble deformation and film drainage is critical to understand the underlying mechanism responsible for bubble-particle attachment. In this review we first discuss the advances in macroscopic experimental methods for characterizing bubble-particle attachment such as induction timer and high speed visualization. Then we focus on advances in measuring the force and drainage of thin liquid films between an air bubble and a solid surface at a nanometer scale. Advances, limits, challenges, and future research opportunities are discussed. By combining atomic force microscopy and reflection interference contrast microscopy, the force, bubble deformation, and liquid film drainage can be measured simultaneously. The simultaneous measurement of the interaction force and the spatiotemporal evolution of the confined liquid film hold great promise to shed new light on flotation.

Enhanced Power Generation of Oxygen-Reducing Biocathode with an Alternating Hydrophobic and Hydrophilic Surface

Most oxygen-reducing biocathodes for microbial electrochemical systems (MESs) require energy-intensive aeration of the catholyte, which negates the energy-saving benefits of MESs. To avoid aeration and enhance oxygen-utilization efficiency, columnar activated carbon with half of its surface coated by polytetrafluoroethylene (PTFE-coated CAC) was fabricated as biocathode material, and its performance was investigated using a tide-type biocathode MES (TBMES). The TBMES with PTFE-coated biocathode achieved a maximum power density of 8.2 ± 0.8 W m^-3, which was 39% higher than that of the untreated control (CAC biocathode). The PTFE-coated biocathode was able to store a cumulative total charge (Q_m) of (10.8 ± 0.2) × 10⁴ C m^-3 during one charge-discharge cycle, whereas the Q_m of CAC biocathode was only (6.9 ± 0.1) × 10⁴ C m^-3, demonstrating that the oxygen entrapment capability of PTFE-coated biocathode was 54 ± 3.8% higher than that of the control. Internal resistance analysis under both oxygen sufficient and reoxygenation conditions suggested the oxygen entrapped by this surface-hydrophobic biocathode was basically sufficient for cathodic oxygen reduction reaction. The slight difference in cathodic microbial communities of the two biocathodes further indicated that the higher accessibility of oxygen due to the hydrophobic surface was the primary cause for the better performance of the PTFE-coated biocathode, while the higher biocatalytic activity of the cathodic biofilm was a minor factor.

A Novel Investigation of the Formation of Titanium Oxide Nanotubes on Thermally Formed Oxide of Ti-6Al-4V

Traditionally, titanium oxide (TiO2) nanotubes (TNTs) are anodized on Ti-6Al-4V alloy (Ti-V) surfaces with native TiO2 (amorphous TiO2); subsequent heat treatment of anodized surfaces has been observed to enhance cellular response. As-is bulk Ti-V, however, is often subjected to heat treatment, such as thermal oxidation (TO), to improve its mechanical properties. Thermal oxidation treatment of Ti-V at temperatures greater than 200°C and 400°C initiates the formation of anatase and rutile TiO2, respectively, which can affect TNT formation. This study aims at understanding the TNT formation mechanism on Ti-V surfaces with TO-formed TiO2 compared with that on as-is Ti-V surfaces with native oxide. Thermal oxidation–formed TiO2 can affect TNT formation and surface wettability because TO-formed TiO2 is expected to be part of the TNT structure. Surface characterization was carried out with field emission scanning electron microscopy, energy dispersive x-ray spectroscopy, water contact angle measurements, and white light interferometry. The TNTs were formed on control and 300°C and 600°C TO-treated Ti-V samples, and significant differences in TNT lengths and surface morphology were observed. No difference in elemental composition was found. Thermal oxidation and TO/anodization treatments produced hydrophilic surfaces, while hydrophobic behavior was observed over time (aging) for all samples. Reduced hydrophobic behavior was observed for TO/anodized samples when compared with control, control/anodized, and TO-treated samples. A method for improved surface wettability and TNT morphology is therefore discussed for possible applications in effective osseointegration of dental and orthopedic implants.

Formation and influence of the dynamic adsorption layer on kinetics of the rising bubble collisions with solution/gas and solution/solid interfaces

BACKGROUND

The DAL (dynamic adsorption layer) formation, that is, the establishment of uneven distribution of adsorption coverage over the rising bubble surface, with significantly diminished coverage at the upstream pole, is the factor of crucial importance for the bubble motion parameters and kinetic of the bubble collisions with various interfaces. The DAL presence can influence the stability of the thin liquid films formed by the colliding bubble at solution/gas and solution solid interfaces.

AIM

The purpose of this paper is to critically review the existing state of art regarding the influence of the DAL formation and existence on the bubble motion parameters as well as kinetics of coalescence at free solution surface and three phase contact (TPC) formation at solid/liquid interfaces of different hydrophilic/hydrophobic properties.

CONCLUSIONS

Despite the fact that up to now there is no direct experimental evidence showing DAL existence, it is documented by experimental data showing clear correlation between bubble local velocity variations and shape pulsations as well as lifetimes of the liquid film formed by the colliding bubble at gas/liquid and gas/solid interfaces.

Bubble-surface interactions with graphite in the presence of adsorbed carboxymethylcellulose

The adsorption of carboxymethylcellulose (CMC), and the subsequent effect on bubble-surface interactions, has been studied for a graphite surface. CMC adsorbs on highly oriented pyrolytic graphite (HOPG) in specific patterns: when adsorbed from a solution of low concentration it forms stretched, isolated and sparsely distributed chains, while upon adsorption from a solution of higher concentration, it forms an interconnected network of multilayer features. The amount and topography of the adsorbed CMC affect the electrical properties as well as the wettability of the polymer-modified HOPG surface. Adsorption of CMC onto the HOPG surface causes the zeta potential to be more negative and the modified surface becomes more hydrophilic. This increase in both the absolute value of zeta potential and the surface hydrophilicity originates from the carboxymethyl groups of the CMC polymer. The effect of the adsorbed polymer layer on wetting film drainage and bubble-surface/particle attachment was determined using high speed video microscopy to monitor single bubble-surface collision, and single bubble Hallimond tube flotation experiments. The time of wetting film drainage and the time of three-phase contact line spreading gets significantly longer for polymer-modified HOPG surfaces, indicating that the film rupture and three-phase contact line expansion were inhibited by the presence of polymer. The effect of longer drainage times and slower dewetting correlated with reduced flotation recovery. The molecular kinetic (MK) model was used to quantify the effect of the polymer on dewetting dynamics, and showed an increase in the jump frequency for the polymer adsorbed at the higher concentration.

Misfolding of amyloidogenic proteins and their interactions with membranes

In this paper, we discuss amyloidogenic proteins, their misfolding, resulting structures, and interactions with membranes, which lead to membrane damage and subsequent cell death. Many of these proteins are implicated in serious illnesses such as Alzheimer’s disease and Parkinson’s disease. Misfolding of amyloidogenic proteins leads to the formation of polymorphic oligomers and fibrils. Oligomeric aggregates are widely thought to be the toxic species, however, fibrils also play a role in membrane damage. We focus on the structure of these aggregates and their interactions with model membranes. Study of interactions of amlyoidogenic proteins with model and natural membranes has shown the importance of the lipid bilayer in protein misfolding and aggregation and has led to the development of several models for membrane permeabilization by the resulting amyloid aggregates. We discuss several of these models: formation of structured pores by misfolded amyloidogenic proteins, extraction of lipids, interactions with receptors in biological membranes, and membrane destabilization by amyloid aggregates perhaps analogous to that caused by antimicrobial peptides.

Structure, folding dynamics, and amyloidogenesis of D76N β2-microglobulin: roles of shear flow, hydrophobic surfaces, and α-crystallin

Systemic amyloidosis is a fatal disease caused by misfolding of native globular proteins, which then aggregate extracellularly as insoluble fibrils, damaging the structure and function of affected organs. The formation of amyloid fibrils in vivo is poorly understood. We recently identified the first naturally occurring structural variant, D76N, of human β₂-microglobulin (β₂m), the ubiquitous light chain of class I major histocompatibility antigens, as the amyloid fibril protein in a family with a new phenotype of late onset fatal hereditary systemic amyloidosis. Here we show that, uniquely, D76N β₂m readily forms amyloid fibrils in vitro under physiological extracellular conditions. The globular native fold transition to the fibrillar state is primed by exposure to a hydrophobic-hydrophilic interface under physiological intensity shear flow. Wild type β₂m is recruited by the variant into amyloid fibrils in vitro but is absent from amyloid deposited in vivo. This may be because, as we show here, such recruitment is inhibited by chaperone activity. Our results suggest general mechanistic principles of in vivo amyloid fibrillogenesis by globular proteins, a previously obscure process. Elucidation of this crucial causative event in clinical amyloidosis should also help to explain the hitherto mysterious timing and location of amyloid deposition.

Influence of the Sonication Temperature on the Debundling Kinetics of Carbon Nanotubes in Propan-2-ol

The effect of sonication temperature on the debundling of carbon nanotube (CNT) macro-bundles is reported and demonstrated by analysis with different particle sizing methods. The change of bundle size over time and after several comparatively gentle sonication cycles of suspensions at various temperatures is reported. A novel technique is presented that produces a more homogeneous nanotube dispersion by lowering the temperature during sonication. We produce evidence that temperature influences the suspension stability, and that low temperatures are preferable to obtain better dispersion without increasing damage to the CNT walls.

Effect of adsorbed polymers on bubble--particle attachment

The influence of adsorbed dextrin-based polymers on the attachment of a rising air bubble to a talc surface has been investigated. Liquid film rupture and dynamic contact angle studies have highlighted the major role that adsorbed polymers can play in bubble-particle attachment. No direct link was established between the equilibrium contact angle of polymer-treated talc surfaces and talc flotation recovery. However, clear correlations were observed between the flotation recovery of polymer-treated talc and the measured wetting film rupture time and rate of dewetting for a bubble attaching to a talc basal plane surface treated with the polymers. The retardation of the three-phase contact line expansion caused by the adsorbed polymers was found to have the largest influence on the bubble-particle attachment. The effect of the morphology (coverage, distribution, and shape) of the adsorbed layer on the wetting film rupture and the motion of the receding water front is discussed.