Advances of spontaneous emulsification and its important applications in enhanced oil recovery process

Unraveling Early-Stage Dynamics of Cage-to-Covalent Organic Framework Transformation at Liquid-Liquid Interface

Postsynthetic linker exchange (PLE) has emerged as an emerging synthetic strategy for constructing high-quality covalent organic frameworks (COFs) from preassembled entities such as linear polymers, amorphous networks, COFs, and porous organic cages by using the principles of dynamic covalent chemistry. The PLE strategy has recently been extended at the liquid-liquid interface to fabricate highly crystalline two-dimensional (2D)-COF membranes at a faster time scale (24 h). Examining the early stages of the interfacial PLE dynamics becomes essential to understanding the expedited COF growth process. In this regard, pendant drop tensiometry has been employed to probe the initial reaction dynamics of the imine cage-to-COF transformation through dynamic interfacial tension (IFT) measurements. The contrasting trends in IFT profiles between PLE-mediated (from cage) and direct COF synthesis (from parent monomers) are in qualitative agreement with the kinetics of bulk-scale interfacial polymerizations. Further, the distinct early-stage interfacial behaviors between the diverse synthetic routes have been experimentally demonstrated using tensiometry, optical microscopy, electron microscopy, and powder X-ray diffraction (PXRD) analysis. The pivotal role of in situ generated imine intermediates (ImIs) and the phenomenon of spontaneous emulsification toward accelerated interfacial COF growth process was delineated. The current study on deploying the pendant drop tensiometric technique to examine early-stage interfacial polymerization dynamics opens up a gripping avenue for mechanistic exploration in PLE-based COF synthesis. The generality of the developed methodology to study the initial COF growth kinetics was extended to a new interfacial PLE-mediated cage-to-COF transformation.

Factors, Mechanisms, and Kinetics of Spontaneous Emulsification for Heavy Oil-in-Water Emulsions

In challenging reservoirs where thermal recovery falls short, cold or chemical oil recovery methods are crucial. Spontaneous emulsification (SE), triggered by gentle disturbance, significantly enhances oil recovery. In elucidating SE mechanisms and kinetics, SE processes via direct contact between oil and aqueous phases without stirring were conducted. The effects of temperature, emulsifier concentration, pH, NaCl concentration, and the oil-to-water ratio on SE were investigated through droplet size analysis and turbidity measurements. Furthermore, the emulsification mechanism and derived emulsification kinetics based on turbidity data were obtained. The results underscore the feasibility of SE for oil-water systems, reducing viscous and capillary resistances without agitation. The emulsified oil mass increased with the temperature, pH, and aqueous-to-oil phase volume ratio while decreasing with the NaCl concentration. In this study, for GD-2 crude oil, the optimal emulsified oil amount occurred at a betaine surfactant (BetS-2) emulsifier concentration of 0.45%. Microscopic photo analysis indicated narrow particle size distributions and small droplets, which remained stable over time under various experimental conditions. A combined SE mechanism involving ultralow interfacial tension, interfacial turbulence due to Marangoni effects, and "diffusion and stranding" due to in situ emulsifier hydrophilicity, was speculated. Additionally, an analogous second-order kinetic equation for SE was proposed, indicating exceptional correlation with calculated and experimentally measured values. This study offers theoretical insight for enhancing oil recovery in chemical and cold production of heavy oil in oilfields.

Revolutionizing Knee Osteoarthritis Treatment: Innovative Self-Nano-Emulsifying Polyethylene Glycol Organogel of Curcumin for Effective Topical Delivery

In the current study, self-nano-emulsifying (SNE) physically cross-linked polyethylene glycol (PEG) organogel (SNE-POG) as an innovative hybrid system was fabricated for topical delivery of water-insoluble and unstable bioactive compound curcumin (CUR). Response surface methodology (RSM) based on Optimal Design was utilized to evaluate the formulation factors. Solid fiber mechanism with homogenization was used to prepare formulations. Pharmaceutical evaluation including rheological and texture analysis, their mathematical correlations besides physical and chemical stability experiments, DSC study, in vitro release, skin permeation behavior, and clinical evaluation were carried out to characterize and optimize the SNE-OGs. PEG 4000 as the main organogelator, Poloxamer 188 (Plx188) and Ethyl Cellulose (EC) as co-gelator/nanoemulsifier agents, and PEG 400 and glycerin as solvent/co-emulsifier agents could generate SNE-POGs in PS range of 356 to 1410 nm that indicated organic base percentage and PEG 4000 were the most detrimental variables. The optimized OG maintained CUR stable in room and accelerated temperatures and could release CUR sustainably up to 72 h achieving high flux of CUR through guinea pig skin. A double-blind clinical trial confirmed that pain scores, stiffness, and difficulty with physical function were remarkably diminished at the end of 8 weeks compared to the placebo (71.68% vs. 7.03%, 62.40% vs. 21.44%, and 45.54% vs. 8.66%, respectively) indicating very high efficiency of system for treating knee osteoarthritis. SNE-POGs show great potential as a new topical drug delivery system for water-insoluble and unstable drugs like CUR that could offer a safe and effective alternative to conventional topical drug delivery system.

One-Pot Synthesis of Amphipathic Esters for Demulsification of Water-in-Crude Oil Emulsions

The current work aims to synthesize new amphipathic compounds, TGHA and PGHA, and investigate their demulsification performance (DP) in water-in-crude oil emulsions. Their chemical structures, thermal stability, interfacial activity, and micelle formation were investigated by different techniques. The bottle test method was used to investigate the effect of demulsifier concentration, water content, temperature, and demulsification time (DT) on the DP of TGHA and PGHA compared to a commercial demulsifier (CD). The results indicated that these parameters have a noticeable impact on the DP of TGHA and PGHA. The results also showed that TGHA exhibited higher DP than PGHA at all investigated parameters, which could be explained by increasing its hydrophobicity due to lower oxyethylene units in its structure than PGHA. An increase in these units means increased hydrophilicity, which led to obstruction of PGHA molecule diffusion in crude oil as a continuous phase. Moreover, TGHA gave a comparable DP with CD, as it gave a higher DP and shorter DT than CD at a higher water content (50%), while the latter achieved the highest DP and the shortest DT at a low water content (10%).

Long-Term Thermal Stability of Ionic Surfactants for Improving Oil Production at High-Salinity High-Temperature Conditions

Surfactants with stable chemical structures and robust ability are required to lower interfacial tension and stabilize emulsions for successful chemical injection applications. This work selected six surfactants, dodecyl carboxylic sodium (LAS), dodecyl sulfonate dodecyl sodium (SLS), dodecyl sulfate sodium (SDS), dodecyltrimethylammonium bromide (DTAB), 3-(N,N-dimethylmyristylammonio) propanesulfonate (SB3-14) and a sulfobetaine formulation (PCT-10), and systematically investigated the ionic-type effects on thermal stability at 95 °C for 150 days in high-salinity water (total dissolved solids (TDS) = 57,600 ppm). With characterizations of aged samples performed through a spinning drop tensiometer, high-performance liquid chromatography, and infrared spectroscopy, it can be seen that the long-term stability sequence of ionic surfactants in solutions is sulfobetaine ≈ quaternary ammonium > sulfonate > sulfate > carboxylate. The carboxylate possibly precipitates out from the solution in the acid form, and the sulfonate and sulfate decompositions are due to the hydrolysis of the anionic head, forming alcohol and NaHSO3/NaHSO4. Obvious decomposition of sulfobetaine and quaternary ammonium was not observed, but these molecules might suffer the elimination of the ionic head, forming the corresponding alkene and amine. The results also show that the dissolved oxygen in the solution preparation significantly sped up the degradation of sulfonates. At last, the emulsion stability tests of crude oil in surfactant solutions showed that sulfobetaine surfactants retained the highest emulsifying ability after thermal aging and thus are promising candidates for long-term chemical injection in high-temperature high-salinity reservoirs.

Kinetic description of water transport during spontaneous emulsification induced by Span 80

Spontaneous emulsification is a phenomenon that forms nanometer-sized droplets (nanodroplets) without the application of any external force, and the mechanism has been actively studied for application to various technologies. In this study, we analyzed the kinetics of spontaneous emulsification induced by Span 80. The measurement of water concentration in Span 80 hexadecane solution indicated that the chemical potential of water in the nanodroplets decreased as the amount of water in the nanodroplets decreased. Based on this result, water transport between the aqueous phase and nanodroplets in which the chemical potential of water was controlled was quantitatively investigated by using a microfluidic device. The results demonstrate that the kinetics of water transport during spontaneous emulsification induced by Span 80 was described by a model of osmotic transport through an organic liquid film between the aqueous phase and nanodroplets.

Poly(N,N-diethylacrylamide)-endowed spontaneous emulsification during the breath figure process and the formation of membranes with hierarchical pores

The spontaneous emulsification for the formation of water-in-oil (W/O) or oil-in-water (O/W) emulsions needs the help of at least one kind of the third component (surfactant or cosolvent) to stabilize the oil-water interface. Herein, with the water/CS2-soluble polymer poly(N,N-diethylacrylamide) (PDEAM) as a surfactant, the spontaneous formation of water-in-PDEAM/CS2 emulsions is reported for the first time. The strong affinity between PDEAM and water or the increase of PDEAM concentration will accelerate the emulsification process with high dispersed phase content. It is demonstrated that the spontaneous emulsification of condensed water droplets into the PDEAM/CS2 solution occurs during the breath figure process, resulting in porous films with two levels of pore sizes (i.e., micron and submicron). The emulsification degree and the amounts of submicron-sized pores increase with PDEAM concentration and solidifying time of the solution. This work brings about incremental interest in spontaneous emulsification that may happen during the breath figure process. The combination of these two simultaneous processes provides us with an option to build hierarchically porous structures with condensed and emulsified water droplets as templates. Such porous membranes may have great potential in fields such as separation, cell culture, and biosensing.

Dynamic Oscillation and Motion of Oil-in-Water Emulsion Droplets

The interplay of interfacial tensions on droplets results in a range of self-powered motions that mimic those of living systems and serve as a tunable model to understand their complex non-equilibrium behavior. Spontaneous shape deformations and oscillations are crucial features observed in nature but difficult to incorporate in synthetic artificial systems. Here, we report sessile oil-in-water emulsions that exhibit rapid oscillating behavior. The oscillations depend on the nature and concentration of the surfactant, the chemical composition of the oil, and the wettability of the solid substrate. The rapid changes in the contact angle per oscillation are observed using side-view optical microscopy. We propose that the changes in the interfacial tension of the oil droplets is due to the partitioning of the surfactant into the oil phase and the movement of self-emulsified oil out of the parent droplets giving rise to the rhythmic variation in droplet contact-line. The ability to control and understand droplet oscillation can help model similar oscillations in out-of-equilibrium systems in nature and reproduce biomimetic behavior in artificial systems for various applications, such as microfluidic lab-on-a-chip and adaptive materials.

Quantifying the Influence of Electrolytes on the Kinetics of Spontaneous Emulsification

This study quantifies the influence of electrolytes on the kinetics of the spontaneous emulsification phenomenon (SEP) of heavy hydrocarbons in a nonionic surfactant solution. The rate of emulsifying hexadecane in Triton X-100, with the presence of sodium chloride and potassium chloride, has been measured using a technique of monitoring single oil droplet photography. The emulsion droplet size produced in the process was measured under the same conditions by using dynamic light scattering. The data obtained from the two experiments were employed to investigate the mass transfer coefficient of the surfactant molecules through the intermediate layer formed between hexadecane and the surfactant solution. It was found that the electrolytes in an aqueous solution increase the surfactant diffusion rate through the intermediate layer and reduce the emulsion droplet size. As a result, both electrolytes reduce the rate of spontaneous emulsification, with potassium chloride having a more substantial reduction. A model was developed to quantify the influence of electrolytes on the kinetics of the SEP. The data and modeling results verify the influence of ions on the kinetics of spontaneous emulsification. The results provide a significant foundation for predicting the solubilization of heavy hydrocarbons in an electrolyte solution.

New Trends in Biosurfactants: From Renewable Origin to Green Enhanced Oil Recovery Applications

Enhanced oil recovery (EOR) processes are technologies used in the oil and gas industry to maximize the extraction of residual oil from reservoirs after primary and secondary recovery methods have been carried out. The injection into the reservoir of surface-active substances capable of reducing the surface tension between oil and the rock surface should favor its extraction with significant economic repercussions. However, the most commonly used surfactants in EOR are derived from petroleum, and their use can have negative environmental impacts, such as toxicity and persistence in the environment. Biosurfactants on the other hand, are derived from renewable resources and are biodegradable, making them potentially more sustainable and environmentally friendly. The present review intends to offer an updated overview of the most significant results available in scientific literature on the potential application of biosurfactants in the context of EOR processes. Aspects such as production strategies, techniques for characterizing the mechanisms of action and the pros and cons of the application of biosurfactants as a principal method for EOR will be illustrated and discussed in detail. Optimized concepts such as the HLD in biosurfactant choice and design for EOR are also discussed. The scientific findings that are illustrated and reviewed in this paper show why general emphasis needs to be placed on the development and adoption of biosurfactants in EOR as a substantial contribution to a more sustainable and environmentally friendly oil and gas industry.

Preparation and Performance Evaluation of Amphiphilic Polymers for Enhanced Heavy Oil Recovery

The continuous growth in global energy and chemical raw material demand has drawn significant attention to the development of heavy oil resources. A primary challenge in heavy oil extraction lies in reducing crude oil viscosity. Alkali-surfactant-polymer (ASP) flooding technology has emerged as an effective method for enhancing heavy oil recovery. However, the chromatographic separation of chemical agents presents a formidable obstacle in heavy oil extraction. To address this challenge, we utilized a free radical polymerization method, employing acrylamide, 2-acrylamido-2-methylpropane sulfonic acid, lauryl acrylate, and benzyl acrylate as raw materials. This approach led to the synthesis of a multifunctional amphiphilic polymer known as PAALB, which we applied to the extraction of heavy oil. The structure of PAALB was meticulously characterized using techniques such as infrared spectroscopy and Nuclear Magnetic Resonance Spectroscopy. To assess the effectiveness of PAALB in reducing heavy oil viscosity and enhancing oil recovery, we conducted a series of tests, including contact angle measurements, interfacial tension assessments, self-emulsification experiments, critical association concentration tests, and sand-packed tube flooding experiments. The research findings indicate that PAALB can reduce oil-water displacement, reduce heavy oil viscosity, and improve swept volume upon injection into the formation. A solution of 5000 mg/L PAALB reduced the contact angle of water droplets on the core surface from 106.55° to 34.95°, shifting the core surface from oil-wet to water-wet, thereby enabling oil-water displacement. Moreover, A solution of 10,000 mg/L PAALB reduced the oil-water interfacial tension to 3.32 × 10-4 mN/m, reaching an ultra-low interfacial tension level, thereby inducing spontaneous emulsification of heavy oil within the formation. Under the condition of an oil-water ratio of 7:3, a solution of 10,000 mg/L PAALB can reduce the viscosity of heavy oil from 14,315 mPa·s to 201 mPa·s via the glass bottle inversion method, with a viscosity reduction rate of 98.60%. In sand-packed tube flooding experiments, under the injection volume of 1.5 PV, PAALB increased the recovery rate by 25.63% compared to traditional hydrolyzed polyacrylamide (HPAM) polymer. The insights derived from this research on amphiphilic polymers hold significant reference value for the development and optimization of chemical flooding strategies aimed at enhancing heavy oil recovery.

Study on the relationships between the oil HLB value and emulsion stabilization

In order to study the relationship between the HLB value of oil and emulsion stabilization, the optimal formation of emulsification system was determined, and then, the properties of emulsion, such as particle size, stability, interfacial tension and zeta potential, were tested by laser particle analyzer, stability analyzer, and interfacial tensiometer. Experimental results showed that the optimal ratio of emulsification was Tween 80 : Span 80 = 5 : 5. Meanwhile, when the HLB value of the emulsification system was close to that of oil, the emulsion exhibited the best stability. This phenomenon is due to the fact that when the HLB values are close, the surfactant molecules are arranged more closely on the oil-water interface, leading to smaller sized emulsion droplet, which is conducive to emulsion stability. This study provides new insights into the effective adjustment of emulsion stability.

Nanotechnology-based ocular drug delivery systems: recent advances and future prospects

Ocular drug delivery has constantly challenged ophthalmologists and drug delivery scientists due to various anatomical and physiological barriers. Static and dynamic ocular barriers prevent the entry of exogenous substances and impede therapeutic agents' active absorption. This review elaborates on the anatomy of the eye and the associated constraints. Followed by an illustration of some common ocular diseases, including glaucoma and their current clinical therapies, emphasizing the significance of drug therapy in treating ocular diseases. Subsequently, advances in ocular drug delivery modalities, especially nanotechnology-based ocular drug delivery systems, are recommended, and some typical research is highlighted. Based on the related research, systematic and comprehensive characterizations of the nanocarriers are summarized, hoping to assist with future research. Besides, we summarize the nanotechnology-based ophthalmic drugs currently on the market or still in clinical trials and the recent patents of nanocarriers. Finally, inspired by current trends and therapeutic concepts, we provide an insight into the challenges faced by novel ocular drug delivery systems and further put forward directions for future research. We hope this review can provide inspiration and motivation for better design and development of novel ophthalmic formulations.

Preparation, characteristics, and performance of the microemulsion system in the removal of oil from beach sand

Oil deposited on shoreline substrates has serious adverse effects on the coastal environment and can persist for a long time. In this study, a green and effective microemulsion (ME) derived from vegetable oil was developed as a washing fluid to remove stranded oil from beach sand. The pseudo-ternary phase diagrams of the castor oil/water (without or without NaCl)/Triton X-100/ethanol were constructed to determine ME regions, and they also demonstrated that the phase behaviors of ME systems were almost independent of salinity. ME-A and ME-B exhibited high oil removal performance, low surfactant residues, and economic benefits, which were determined to be the W/O microstructure. Under optimal operation conditions, the oil removal efficiencies for both ME systems were 84.3 % and 86.8 %, respectively. Moreover, the reusability evaluation showed that the ME system still had over 70 % oil removal rates, even though it was used six times, implying its sustainability and reliability.

Exploring the Versatility of Microemulsions in Cutaneous Drug Delivery: Opportunities and Challenges

Microemulsions are novel drug delivery systems that have garnered significant attention in the pharmaceutical research field. These systems possess several desirable characteristics, such as transparency and thermodynamic stability, which make them suitable for delivering both hydrophilic and hydrophobic drugs. In this comprehensive review, we aim to explore different aspects related to the formulation, characterization, and applications of microemulsions, with a particular emphasis on their potential for cutaneous drug delivery. Microemulsions have shown great promise in overcoming bioavailability concerns and enabling sustained drug delivery. Thus, it is crucial to have a thorough understanding of their formulation and characterization in order to optimize their effectiveness and safety. This review will delve into the different types of microemulsions, their composition, and the factors that affect their stability. Furthermore, the potential of microemulsions as drug delivery systems for skin applications will be discussed. Overall, this review will provide valuable insights into the advantages of microemulsions as drug delivery systems and their potential for improving cutaneous drug delivery.

Molecular Insights into Cyclodextrin-Adamantane-Modified Copolymer Host-Guest Interactions

Supramolecular polymer flooding has great potential in solving the problems of difficult injection and low recovery in low-permeability polymer reservoirs. However, the self-assembly mechanism of supramolecular polymers is not yet to be fully understood at the molecular level. In this work, molecular dynamics simulations were used to explore the formation of cyclodextrin and adamantane-modified supramolecular polymer hydrogels; the self-assembly mechanism was summarized; and the effect of concentration on the oil displacement index was evaluated. The assembly mechanism of supramolecular polymers can be attributed to the "node-rebar-cement" mode of action. At the same time, Na⁺ can form intermolecular and intramolecular salt bridges with supramolecular polymers, and together with the "node-rebar-cement" mode of action, the supramolecular polymers can form a more compact 3D network structure. When the polymer concentration was increased, especially up to its critical association concentration (CAC), the association increased significantly. Besides, the construction of a 3D network was promoted, which results in a higher viscosity. This work investigated the assembly process of supramolecular polymers from the molecular scale and explained its mechanism of action, which makes up for the deficiencies of other research methods and provides a theoretical basis for screening out functional units that can be used for the supramolecular polymer assembly.

Antibacterial and Anti-Acne Activity of Benzoyl Peroxide Nanoparticles Incorporated in Lemongrass Oil Nanoemulgel

Purpose: The goal of this study was to make Benzoyl Peroxide (BPO) nanoemulgel to improve its ability to kill bacteria. BPO has trouble getting into the skin, being absorbed by the skin, staying stable, and being spread out. Methods: A BPO nanoemulgel formulation was prepared by combining BPO nanoemulsion with Carbopol hydrogel. The drug was tested for solubility in various oils and surfactants in order to select the best oil and surfactant for the drug, and then the drug nanoemulsion formulation was prepared using a self-nano-emulsifying technique with Tween 80, Span 80, and lemongrass oil. The drug nanoemulgel was looked at in terms of its particle size, polydispersity index (PDI), rheological behavior, drug release, and antimicrobial activity. Results: Based on the solubility test results, lemongrass oil was the best solubilizing oil for drugs, while Tween 80 and Span 80 demonstrated the highest solubilizing ability for drugs among the surfactants. The optimum self-nano-emulsifying formulation had particle sizes of less than 200 nm and a PDI of close to zero. The results showed that incorporating the SNEDDS formulation of the drug with Carbopol at various concentrations did not cause a significant change in the particle size and PDI of the drug. The zeta potential results for drug nanoemulgel were negative, with more than 30 mV. All nanoemulgel formulations exhibited pseudo-plastic behavior, with 0.4% Carbopol exhibiting the highest release pattern. The drug nanoemulgel formulation worked better against bacteria and acne than the product on the market. Conclusion: Nanoemulgel is a promising way to deliver BPO because it makes the drug more stable and increases its ability to kill bacteria.

Novel Strategy of Polymers in Combination with Silica Particles for Reversible Control of Oil-Water Interface

Hybrid smart emulsification systems are highly applicable in manipulating oil-in-water (O/W) droplets. Herein, novel switchable block polymers containing both zwitterionic and tertiary amine pendent groups were designed and synthesized to combine with charged silica particles to stabilize the O/W emulsion responsive to pH. This study was carried out in O/W emulsions stabilized with the polymer and silica particles under different pH conditions. The emulsion system was also simulated using molecular dynamics simulation to reveal the mechanism at molecular levels, thus gaining insight into the relationships between the emulsifying properties and the molecular interaction of the mixed system. Upon acidification of the continuous aqueous phase, protonated polymers with excellent hydrophilicity were induced by charged silica particles to cause rapid emulsion coalescence. In alkaline media, the mixed system conversely stabilized the O/W emulsions, cutting polymer consumption by over three-quarters. The emulsification and demulsification can be switched alternately by tuning the pH conditions. The applications exhibited excellent efficiency in separating heavy oil/water emulsions and proved the high conversion rate in emulsion polymerization. Overall, with this novel strategy to relieve tedious modifications on particle surfaces and massive consumption of polymers, the designed responsive emulsification systems can impart intelligent and controllable chemical reactivity to emulsions on demand in a more affordable and sustainable way.

Research advances of in vivo biological fate of food bioactives delivered by colloidal systems

Food bioactives exhibit various health-promoting effects and are widely used in functional foods to maintain human health. After oral intake, bioactives undergo complex biological processes before reaching the target organs to exert their biological effects. However, several factors may reduce their bioavailability. Colloidal systems have attracted special attention due to their great potential to improve bioavailability and bioefficiency. Herein, we focus on the importance of in vivo studies of the biological fates of bioactives delivered by colloidal systems. Increasing evidence demonstrates that the construction, composition, and physicochemical properties of the delivery systems significantly influence the in vivo biological fates of bioactives. These results demonstrate the great potential to control the in vivo behavior of food bioactives by designing specific delivery systems. We also compare in vivo and in vitro models used for biological studies of the fate of food bioactives delivered by colloidal systems. Meanwhile, the significance of the gut microbiota, targeted delivery, and personalized nutrition should be carefully considered. This review provides new insight for further studies of food bioactives delivered by colloidal systems, as well as scientific guidance for the reasonable design of personalized nutrition.

Therapeutic Potential of Controlled Delivery Systems in Asthma: Preclinical Development of Flavonoid-Based Treatments

Asthma is a chronic disease with increasing prevalence and incidence, manifested by allergic inflammatory reactions, and is life-threatening for patients with severe disease. Repetitive challenges with the allergens and limitation of treatment efficacy greatly dampens successful management of asthma. The adverse events related to several drugs currently used, such as corticosteroids and β-agonists, and the low rigorous adherence to preconized protocols likely compromises a more assertive therapy. Flavonoids represent a class of natural compounds with extraordinary antioxidant and anti-inflammatory properties, with their potential benefits already demonstrated for several diseases, including asthma. Advanced technology has been used in the pharmaceutical field to improve the efficacy and safety of drugs. Notably, there is also an increasing interest for the application of these techniques using natural products as active molecules. Flavones, flavonols, flavanones, and chalcones are examples of flavonoid compounds that were tested in controlled delivery systems for asthma treatment, and which achieved better treatment results in comparison to their free forms. This review aims to provide a comprehensive understanding of the development of novel controlled delivery systems to enhance the therapeutic potential of flavonoids as active molecules for asthma treatment.

Influence of Surfactant Concentration on Spontaneous Emulsification Kinetics

The kinetics of spontaneous emulsification is investigated on aqueous pendant drops in paraffin oil. Optical microscopy in transmission mode is used for high-spatial-resolution image recording. The influence of a lipophilic surfactant (Span 80) and two water-soluble surfactants (CTAB and SDS) is investigated. As time runs, the drop interface turns opaque due to the formation of microstructures associated with spontaneous emulsification. The time evolution of this phenomenon is shown to depend upon temperature and surfactant concentration, which leads to an overall shrinkage due to gradual water uptake and transport into paraffin oil. Spontaneous emulsification kinetics depends upon the chemical composition. Higher concentrations of Span 80 and CTAB (resp. SDS) are shown to promote (resp. hinder) water transport. This work provides new insights into the understanding of spontaneous emulsification when combining the properties of non-ionic and ionic surfactants.

Comprehensive review of the interfacial behavior of water/oil/surfactant systems using dissipative particle dynamics simulation

A comprehensive understanding of interfacial behavior in water/oil/surfactant systems is critical to evaluating the performance of emulsions in various industries, specifically in the oil and gas industry. To gain fundamental knowledge regarding this interfacial behavior, atomistic methods, e.g., molecular dynamics (MD) simulation, can be employed; however, MD simulation cannot handle phenomena that require more than a million atoms. The coarse-grained mesoscale methods were introduced to resolve this issue. One of the most effective mesoscale coarse-grained approaches for simulating colloidal systems is dissipative particle dynamics (DPD), which bridges the gap between macroscopic time and length scales and molecular-scale simulation. This work reviews the fundamentals of DPD simulation and its progress on colloids and interface systems, especially surfactant/water/oil mixtures. The effects of temperature, salt content, a water/oil ratio, a shear rate, and a type of surfactant on the interfacial behavior in water/oil/surfactant systems using DPD simulation are evaluated. In addition, the obtained results are also investigated through the lens of the chemistry of surfactants and emulsions. The outcome of this comprehensive review demonstrates the importance of DPD simulation in various processes with a focus on the colloidal and interfacial behavior of surfactants at water-oil interfaces.

A review on octenyl succinic anhydride modified starch-based Pickering-emulsion: Instabilities and ingredients interactions

Pickering emulsions endow attractive features and a wide versatility in both food and nonfood fields. In the last decades, a noticeable interest has emerged toward the use of octenyl succinic anhydride (OSA)-starch to improve the long-term stability in such systems. In this review, instabilities were pointed out, where a new kinetic equilibrium was observed in Pickering emulsions assigned to migration and size variations of particles. These features were monitored using rheological measurements to understand microstructure and droplets mobility. The elastic modulus (G'), the viscous modulus (G″), and tan(δ) values were attributed to the transition from solid to fluid and assigned to the instability of the formulation regardless of the type of the system configuration. The novelties in using OSA-modified starch, were also exposed. The chemical modification of starch decreased creaming for months. Interaction between OSA-modified starches and some ionic components (potassium, magnesium, and calcium) as well as hydrocolloids and proteins reduced creaming and coalescence due to dense interfacial film. Furthermore, the key parameters (oil fraction, fatty acids composition, oxidative stress oil polarity, and oil viscosity) that govern oil phase in Pickering emulsion, were analyzed. These parameters were found to be positively correlated to the stability of Pickering emulsions.

The Utilization of Ultrasound for Improving Oil Recovery and Formation Damage Remediation in Petroleum Reservoirs: Review of Most Recent Researches

The ultrasound method is a low-cost, environmentally safe technology that may be utilized in the petroleum industry to boost oil recovery from the underground reservoir via enhanced oil recovery or well stimulation campaigns. The method uses a downhole instrument to propagate waves into the formation, enhancing oil recovery and/or removing formation damage around the wellbore that has caused oil flow constraints. Ultrasonic technology has piqued the interest of the petroleum industry, and as a result, research efforts are ongoing to fill up the gaps in its application. This paper discusses the most recent research on the investigation of ultrasound’s applicability in underground petroleum reservoirs for improved oil recovery and formation damage remediation. New study areas and scopes were identified, and future investigations were proposed.

Advances of supramolecular interaction systems for improved oil recovery (IOR)

Improved oil recovery (IOR) includes enhanced oil recovery (EOR) and other technologies (i.e. fracturing, water injection optimization, etc.), have become important methods to increase the oil/gas production in petroleum industry. However, conventional flooding systems always encounter the problems of low efficiency, high cost and complicated synthetic procedures for harsh reservoirs conditions. In recent decades, the supramolecular interactions are introduced into IOR processes to simplify the synthetic procedures, alter their structures and properties with bespoke functionalities and responsiveness suitable for different conditions. Herein, we primarily review the fundamentals of several supramolecular interactions, including hydrophobic association, hydrogen bond, electrostatic interaction, host-guest recognition, metal-ligand coordination and dynamic covalent bond from intrinsic principles and extrinsic functions. Then, the descriptions of supramolecular interactions in IOR processes from categories and advances are focused on the following variables: polymer, surfactant, surfactant/polymer (SP) complex for EOR and viscoelasticity surfactant (VES) for clean hydraulic fracturing aspects. Finally, the field applications, challenges and prospects for supramolecular interactions in IOR processes are involved and systematically addressed. The development of supramolecular interactions can open the way toward adaptive and evolutive IOR technology, a further step towards the cost-effective production of petroleum industry.

On the effects of organic-acids isomers on temperature-responsiveness in wormlike micelles (WLMs) systems

Responsive wormlike micelles (WLMs) consisted of cationic surfactants and organic-acids are fascinating due to their reversible molecular recognition properties. However, it is unknown how the structure of organic-acids alters the stimuli-responsiveness of WLMs systems. Herein, the peculiar nature of temperature-responsive behaviors in three WLMs systems were systematically investigated. These were manufactured by combining N-erucamidopropyl-N,N-dimethylamine (UC₂₂AMPM) with isomers of organic-acids: o-phthalic acid (o-PA), m-phthalic acid (m-PA) and p-phthalic acid (p-PA) at molar ratio of 2:1 (named as o-EAPA, m-EAPA and p-EAPA respectively). The phase behaviors, macro- and micro-rheology, as well as the mechanism of temperature-responsiveness were explored by visual inspection, rheological and optical methods. The results showed that the three systems exhibited different responsiveness with increase of temperature. Among them, the viscosity and viscoelasticity of o-EAPA were gradually decreased with temperature increase from 30 °C to 90 °C. On the other hand, those of p-EAPA were firstly increased and subsequently decreased, exhibiting the highest viscosity during the heating process. This peculiar phenomenon was attributed to the hydrophilic difference of organic-acids isomers, leading to variations of micelle transitions upon temperature increase. This study is the first report of aromatic-acids isomers inducing different on temperature-responsiveness, and finding beneficial for the development of responsive WLMs for different applications.

Risk assessment and remediation of NAPL contaminated soil and groundwater

The presence of water-immiscible organic liquids—commonly called non-aqueous phase liquids or NAPLs—in soils and groundwater, is a worldwide environmental problem. Typical examples of NAPLs include: petroleum products, organic solvents and organic liquid waste from laboratories and industry. The molecular components of NAPLs present in soils, rocks and groundwater are readily transferred to the vapour and aqueous phases. The extent to which they do this is determined by their solubility (which is quite limited) and vapour pressure (which can be quite high). These molecular components, once dispersed in the vapour phase or dissolved in the aqueous phase, can provide a long-term source of harm to biotic receptors. The object of this lecture text is to examine how we can assess the degree of harm using quantitative risk assessment and how NAPL contaminated environments can be restored through the use of chemical, biological and physical remediation technologies.

Graphical abstract

Predicting Spontaneous Emulsification in Saltwater Environments Using the HLD Model

Spontaneous emulsification of toluene with nonylphenol polyethoxylate (NPE) and sodium dodecylbenzenesulfonate (SDBS) surfactants in saltwater environments was studied. NaCl promoted the spontaneous emulsification of an otherwise non-spontaneous SDBS-toluene system. Dynamic light scattering and turbidity indicated that spontaneity increased with NaCl concentration. The mechanism of spontaneous emulsification was dependent on surfactant type; NPE emulsified via micelle swelling, and SDBS emulsified via nucleation and growth. Hydrophilic lipophilic difference (HLD) calculations were used to model spontaneous emulsification and spontaneity. As HLD approached zero, conditions became more favorable for spontaneous emulsification. Between HLD values of -2.4 and -2.05, samples transitioned from non-spontaneous to spontaneous. This study aids in predicting spontaneous emulsion formation in saltwater environments for applications in nanoemulsion formation and wastewater remediation.

Cold-Burst Method for Nanoparticle Formation with Natural Triglyceride Oils

The preparation of nanoemulsions of triglyceride oils in water usually requires high mechanical energy and sophisticated equipment. Recently, we showed that α-to-β (viz., gel-to-crystal) phase transition, observed with most lipid substances (triglycerides, diglycerides, phospholipids, alkanes, etc.), may cause spontaneous disintegration of microparticles of these lipids, dispersed in aqueous solutions of appropriate surfactants, into nanometer particles/drops using a simple cooling/heating cycle of the lipid dispersion (Cholakova et al. ACS Nano 2020, 14, 8594). In the current study, we show that this "cold-burst process" is observed also with natural oils of high practical interest, including coconut oil, palm kernel oil, and cocoa butter. Mean drop diameters of ca. 50-100 nm were achieved with some of the studied oils. From the results of dedicated model experiments, we conclude that intensive nanofragmentation is observed when the following requirements are met: (1) The three-phase contact angle at the solid lipid-water-air interface is below ca. 30 degrees. (2) The equilibrium surface tension of the surfactant solution is below ca. 30 mN/m, and the dynamic surface tension decreases rapidly. (3) The surfactant solution contains nonspherical surfactant micelles, e.g., ellipsoidal micelles or bigger supramolecular aggregates. (4) The three-phase contact angle measured at the contact line (frozen oil-surfactant solution-melted oil) is also relatively low. The mechanism(s) of the particle bursting process is revealed, and on this basis, the role of all of these factors is clarified and discussed. We explain all main effects observed experimentally and define guiding principles for optimization of the cold-burst process in various, practically relevant lipid-surfactant systems.

Surfactant-Enhanced Spontaneous Emulsification Near the Crude Oil-Water Interface

Spontaneous emulsification near the oil-water interface and destabilization of water-in-oil emulsions in the bulk oil phase may affect the efficiency of improved oil recovery. In this study, we investigate the effect of a demulsifier surfactant on spontaneous emulsification near the oil-aqueous phase interface and in the bulk oil phase through imaging. The results show that pronounced spontaneous emulsions may form near the oil-aqueous phase interfaces. The mechanism of diffusion and stranding is believed to dominate spontaneous emulsification. A demulsifier surfactant, which has been used for demulsification of water-in-oil emulsions in the bulk oil phase, is found to enhance spontaneous emulsification near the oil-water interface. The diffusive flux of water through the interface can be enhanced if the demulsifier is added into the aqueous phase, in which the demulsifier may act as a carrier. It can generate a region of local supersaturation combined with hydrated asphaltenes and result in faster and stronger spontaneous emulsification. We also investigate the effect of a viscosifier polymer on emulsion formation. The polymer is used to improve sweep efficiency in oil displacement. In this work, we show that it can inhibit emulsification in the bulk oil phase, but its effect on spontaneous emulsification near the interface is not pronounced.

Progress of polymer gels for conformance control in oilfield

For the past decades, long-term water flooding processes have led to water channeling in mature reservoirs, which is a severe problem in oilfields. The development of better plugging ability and cost-effective polymer gel is a key aspect for the control of excess water production. Research on polymer gel applicable in a heterogeneous reservoir to plug high permeable channels has been growing significantly as revealed by numerous published scientific papers. This review intends to discuss the polymer gel techniques from innovations to applications. The related difficulties and future prospects of polymer gels are also covered. Developments of polymer gels to resist temperature, early gel formation, synergistic mechanisms and influence of pH, high salinity are systematically emphasized. The review provides a basis to develop polymer gels for future applications in oilfields to meet harsh reservoir conditions. It will assist the researchers to further develop polymer gels to improve the oil recovery from mature reservoirs under economic conditions to meet the requirements of future oilfields.