Photocatalytic nanoparticles - From membrane interactions to antimicrobial and antiviral effects

Oxidative stress-modifying effects of TiO2nanoparticles with varying content of Ti3+(Ti2+) ions

Nanoparticles (NPs) with reactive oxygen species (ROS)-regulating ability have recently attracted great attention as promising agents for nanomedicine. In the present study, we have analyzed the effects of TiO2defect structure related to the presence of stoichiometric (Ti4+) and non-stoichiometric (Ti3+and Ti2+) titanium ions in the crystal lattice and TiO2NPs aggregation ability on H2O2- and tert-butyl hydroperoxide (tBOOH)-induced ROS production in L929 cells. Synthesized TiO2-A, TiO2-B, and TiO2-C NPs with varying Ti3+(Ti2+) content were characterized by x-ray powder diffraction, transmission electron microscopy, small-angle x-ray scattering, x-ray photoelectron spectroscopy, and optical spectroscopy methods. Given the role of ROS-mediated toxicity for metal oxide NPs, L929 cell viability and changes in the intracellular ROS levels in H2O2- and tBOOH-treated L929 cells incubated with TiO2NPs have been evaluated. Our research shows that both the amount of non-stoichiometric Ti3+and Ti2+ions in the crystal lattice of TiO2NPs and NPs aggregative behavior affect their catalytic activity, in particular, H2O2decomposition and, consequently, the efficiency of aggravating H2O2- and tBOOH-induced oxidative damage to L929 cells. TiO2-A NPs reveal the strongest H2O2decomposition activity aligning with their less pronounced additional effects on H2O2-treated L929 cells due to the highest amount of Ti3+(Ti2+) ions. TiO2-C NPs with smaller amounts of Ti3+ions and a tendency to aggregate in water solutions show lower antioxidant activity and, consequently, some elevation of the level of ROS in H2O2/tBOOH-treated L929 cells. Our findings suggest that synthesized TiO2NPs capable of enhancing ROS generation at concentrations non-toxic for normal cells, which should be further investigated to assess their possible application in nanomedicine as ROS-regulating pharmaceutical agents.

Accelerated Exosomal Metabolic Profiling Enabled by Robust On-Target Array Sintering with Metal-Organic Frameworks

Pancreatic cancer is highly lethal, and survival chances improve only with early detection at a precancerous stage. However, there remains a significant gap in developing tools for large-scale, rapid screening. To this end, a high-throughput On-Target Array Extraction Platform (OTAEP) by direct sintering of a series of metal-organic frameworks (MOFs) for dual in situ extraction, encompassing both exosomes and their metabolic profiles, is developed. Based on the principle of geometry-dependent photothermal conversion efficiency and standard testing, the appropriate MOF functional unit is identified. This unit enables exosome enrichment within 10 min and metabolic fingerprint extraction in under 1 s of laser irradiation, with over five reuse. To further accelerate and enhance the quality of metabolic profile analysis, the application of Surrogate Variable Analysis to eliminate hidden confounding factors within the profiles is proposed, and five biomarkers demonstrated by MS/MS experiments are identified. These biomarkers enable early diagnosis, risk stratification, and staging of pancreatic cancer simultaneously, with sensitivity of 94.1%, specificity of 98.8%, and precision of 94.9%. This work represents a breakthrough for overcoming throughput challenges in large-scale testing and for addressing confounding factors in big data analysis.

Light-Induced Transformation of Virus-Like Particles on TiO2

Titanium dioxide (TiO2) shows significant potential as a self-cleaning material to inactivate severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and prevent virus transmission. This study provides insights into the impact of UV-A light on the photocatalytic inactivation of adsorbed SARS-CoV-2 virus-like particles (VLPs) on a TiO2 surface at the molecular and atomic levels. X-ray photoelectron spectroscopy, combined with density functional theory calculations, reveals that spike proteins can adsorb on TiO2 predominantly via their amine and amide functional groups in their amino acids blocks. We employ atomic force microscopy and grazing-incidence small-angle X-ray scattering (GISAXS) to investigate the molecular-scale morphological changes during the inactivation of VLPs on TiO2 under light irradiation. Notably, in situ measurements reveal photoinduced morphological changes of VLPs, resulting in increased particle diameters. These results suggest that the denaturation of structural proteins induced by UV irradiation and oxidation of the virus structure through photocatalytic reactions can take place on the TiO2 surface. The in situ GISAXS measurements under an N2 atmosphere reveal that the virus morphology remains intact under UV light. This provides evidence that the presence of both oxygen and UV light is necessary to initiate photocatalytic reactions on the surface and subsequently inactivate the adsorbed viruses. The chemical insights into the virus inactivation process obtained in this study contribute significantly to the development of solid materials for the inactivation of enveloped viruses.

Photochemical Strategies toward Precision Targeting against Multidrug-Resistant Bacterial Infections

Infectious diseases pose a serious threat and a substantial economic burden on global human and public health security, especially with the frequent emergence of multidrug-resistant (MDR) bacteria in clinical settings. In response to this urgent need, various photobased anti-infectious therapies have been reported lately. This Review explores and discusses several photochemical targeted antibacterial therapeutic strategies for addressing bacterial infections regardless of their antibiotic susceptibility. In contrast to conventional photobased therapies, these approaches facilitate precise targeting of pathogenic bacteria and/or infectious microenvironments, effectively minimizing toxicity to mammalian cells and surrounding healthy tissues. The highlighted therapies include photodynamic therapy, photocatalytic therapy, photothermal therapy, endogenous pigments-based photobleaching therapy, and polyphenols-based photo-oxidation therapy. This comprehensive exploration aims to offer updated information to facilitate the development of effective, convenient, safe, and alternative strategies to counter the growing threat of MDR bacteria in the future.

Recent advances in photocatalytic removal of antiviral drugs by Z-scheme and S-scheme heterojunction

The possible impact of antivirals on ecosystems and the emergence of antiviral resistance are the reasons for concern about their environmental release. Consequently, there has been a significant increase in curiosity regarding their presence in both organic and synthetic systems in recent years. The primary objective of this review is to address the void of information regarding the global presence of antiviral drugs in both wastewater and natural water sources. Photocatalytic degradation of pollutants is an eco-friendly, cost-effective method that effectively addresses environmental degradation. The development of efficient photocatalysts remains a significant issue in accelerating the degradation of pollutants, especially when employing solar light. Thus, the development of Z-scheme and S-scheme semiconductor heterojunctions has emerged as a viable method to improve light absorption and enhance the redox capability of photocatalysts. The principles of Z-scheme and S-scheme are reviewed extensively. The degradation route and occurrence of antiviral are discussed briefly. Finally, a short preview of the degradation of antiviral using Z-scheme and S-scheme is also highlighted.

Metal-polyphenol coordination nanosheets with synergistic peroxidase-like and photothermal properties for efficient antibacterial treatment

Bacterial infections pose a serious threat to human health and socioeconomics worldwide. In the post-antibiotic era, the development of novel antimicrobial agents remains a challenge. Polyphenols are natural compounds with a variety of biological activities such as intrinsic antimicrobial activity and antioxidant properties. Metal-polyphenol obtained by chelation of polyphenol ligands with metal ions not only possesses efficient antimicrobial activity but also excellent biocompatibility, which has great potential for application in biomedical and food packaging fields. Herein, we developed metal-polyphenol coordination nanosheets named copper oxidized tannic acid quinone (CuTAQ) possessing efficient antibacterial and anti-biofilm effects, which was synthesized by a facile one-pot method. The synthesis was achieved by chelation of partially oxidized tannic acid (TA) with Cu2+ under mild conditions, which supports low-cost and large-scale production. It was demonstrated that CuTAQ exhibited high antibacterial activity via disrupting the integrity of bacterial cell membranes, inducing oxidative stress, and interfering with metabolism. In addition, CuTAQ exhibits excellent peroxidase catalytic activity and photothermal conversion properties, which play a significant role in enhancing its bactericidal and biofilm scavenging abilities. This study provides insights for rational design of innovative metal-polyphenol nanomaterials with efficient antimicrobial properties.

Agriculture and environmental management through nanotechnology: Eco-friendly nanomaterial synthesis for soil-plant systems, food safety, and sustainability

Through the advancement of nanotechnology, agricultural and food systems are undergoing strategic enhancements, offering innovative solutions to complex problems. This scholarly essay thoroughly examines nanotechnological innovations and their implications within these critical industries. Traditional practices are undergoing radical transformation as nanomaterials emerge as novel agents in roles traditionally filled by fertilizers, pesticides, and biosensors. Micronutrient management and preservation techniques are further enhanced, indicating a shift towards more nutrient-dense and longevity-oriented food production. Nanoparticles (NPs), with their unique physicochemical properties, such as an extraordinary surface-to-volume ratio, find applications in healthcare, diagnostics, agriculture, and other fields. However, concerns about their potential overuse and bioaccumulation raise unanswered questions about their health effects. Molecule-to-molecule interactions and physicochemical dynamics create pathways through which nanoparticles cause toxicity. The combination of nanotechnology and environmental sustainability principles leads to the examination of green nanoparticle synthesis. The discourse extends to how nanomaterials penetrate biological systems, their applications, toxicological effects, and dissemination routes. Additionally, this examination delves into the ecological consequences of nanomaterial contamination in natural ecosystems. Employing robust risk assessment methodologies, including the risk allocation framework, is recommended to address potential dangers associated with nanotechnology integration. Establishing standardized, universally accepted guidelines for evaluating nanomaterial toxicity and protocols for nano-waste disposal is urged to ensure responsible stewardship of this transformative technology. In conclusion, the article summarizes global trends, persistent challenges, and emerging regulatory strategies shaping nanotechnology in agriculture and food science. Sustained, in-depth research is crucial to fully benefit from nanotechnology prospects for sustainable agriculture and food systems.

Polylactic acid electrospun membrane loaded with cerium nitrogen co-doped titanium dioxide for visible light-triggered antibacterial photocatalytic therapy

Wound infection caused by multidrug-resistant bacteria poses a serious threat to antibiotic therapy. Therefore, it is of vital importance to find new methods and modes for antibacterial therapy. The cerium nitrogen co-doped titanium dioxide nanoparticles (N-TiO2, 0.05Ce-N-TiO2, 0.1Ce-N-TiO2, and 0.2Ce-N-TiO2) were synthesized using the hydrothermal method in this study. Subsequently, electrospinning was employed to fabricate polylactic acid (PLA) electrospun membranes loaded with the above-mentioned nanoparticles (PLA-N, PLA-0.05, PLA-0.1, and PLA-0.2). The results indicated that cerium and nitrogen co-doping tetrabutyl titanate enhanced the visible light photocatalytic efficiency of TiO2 nanoparticles and enabled the conversion of ultraviolet light into harmless visible light. The photocatalytic reaction under visible light irradiation induced the generation of ROS, which could effectively inhibit the bacterial growth. The antibacterial assay showed that it was effective in eliminating S. aureus and E. coli and the survival rates of two types of bacteria under 30 min of irradiation were significantly below 20% in the PLA-0.2 experimental group. Moreover, the bactericidal membranes also have excellent biocompatibility performance. This bio-friendly and biodegradable membrane may be applied to skin trauma and infection in future to curb drug-resistant bacteria and provide more alternative options for antimicrobial therapy.

Hybrid Materials Obtained by Immobilization of Biosynthesized Ag Nanoparticles with Antioxidant and Antimicrobial Activity

Ag nanoparticles (AgNPs) were biosynthesized using sage (Salvia officinalis L.) extract. The obtained nanoparticles were supported on SBA-15 mesoporous silica (S), before and after immobilization of 10% TiO2 (Degussa-P25, STp; commercial rutile, STr; and silica synthesized from Ti butoxide, STb). The formation of AgNPs was confirmed by X-ray diffraction. The plasmon resonance effect, evidenced by UV-Vis spectra, was preserved after immobilization only for the sample supported on STb. The immobilization and dispersion properties of AgNPs on supports were evidenced by TEM microscopy, energy-dispersive X-rays, dynamic light scattering, photoluminescence and FT-IR spectroscopy. The antioxidant activity of the supported samples significantly exceeded that of the sage extract or AgNPs. Antimicrobial tests were carried out, in conditions of darkness and white light, on Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli and Candida albicans. Higher antimicrobial activity was evident for SAg and STbAg samples. White light increased antibacterial activity in the case of Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). In the first case, antibacterial activity increased for both supported and unsupported AgNPs, while in the second one, the activity increased only for SAg and STbAg samples. The proposed antibacterial mechanism shows the effect of AgNPs and Ag+ ions on bacteria in dark and light conditions.

The effects of antimicrobial photocatalytic nanoparticles on the flexural strength of orthodontic acrylic resins: A systematic review and meta-analysis

BACKGROUND/PURPOSE

Orthodontic acrylic resins containing antimicrobial photocatalytic nanoparticles aims to reduce oral lesions including denture stomatitis and white spot lesions but they should not imperil its mechanical properties. This systematic review was done to evaluate the effect of various photocatalytic nanoparticles on the flexural strength (FS) of acrylic resins.

MATERIALS AND METHODS

We systematically searched the PubMed/Medline, Cochrane Library, and Scopus databases from January 2018 to October 2023. The review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and the quality of the studies was evaluated using the QUIN tool, which is specifically designed to assess the risk of bias in vitro studies.

RESULTS

Following screening of 1016 initial records, 23 studies were deemed eligible for inclusion. The addition of photocatalytic nanoparticles, such as emodin (Emo), curcumin (Cur), Cur nisin (CurNis), zeolite/zinc oxide (Zeo/ZnO), and Ulva lactuca (U. lactuca), to acrylic resins resulted in a reduction in FS, with the extent of reduction dependent on the nanoparticle concentration. Specifically, the addition of Emo (≥0.5 %), Cur (≥0.5 %), CurNis (≥5 %), Zeo/ZnO (≥2), and U. lactuca (≥1 %) to acrylic resins significantly decreased FS. Conversely, the inclusion of ZnO and titanium dioxide (TiO2) in acrylic resins improved FS, but higher concentrations (≥5 % for TiO2) had a limited positive effect.

CONCLUSION

Our study supports the use of low concentrations of photocatalytic nanoparticles, such as ZnO (≤2 %), TiO2 (≤3 %), Emo (≤0.5 %), Cur (≤0.5 %), CurNis (≤5 %), and U. lactuca (≤1 %), in orthodontic acrylic resins without compromising FS.

Metallic nanoparticle actions on the outer layer structure and properties of Bacillus cereus and Staphylococcus epidermidis

Although the antimicrobial activity of nanoparticles (NPs) penetrating inside the cell is widely recognised, the toxicity of large NPs (>10 nm) that cannot be translocated across bacterial membranes remains unclear. Therefore, this study was performed to elucidate the direct effects of Ag-NPs, Cu-NPs, ZnO-NPs and TiO2-NPs on relative membrane potential, permeability, hydrophobicity, structural changes within chemical compounds at the molecular level and the distribution of NPs on the surfaces of the bacteria Bacillus cereus and Staphylococcus epidermidis. Overall analysis of the results indicated the different impacts of individual NPs on the measured parameters in both strains depending on their type and concentration. B. cereus proved to be more resistant to the action of NPs than S. epidermidis. Generally, Cu-NPs showed the most substantial toxic effect on both strains; however, Ag-NPs exhibited negligible toxicity. All NPs had a strong affinity for cell surfaces and showed strain-dependent characteristic dispersion. ATR-FTIR analysis explained the distinctive interactions of NPs with bacterial functional groups, leading to macromolecular structural modifications. The results presented provide new and solid evidence for the current understanding of the interactions of metallic NPs with bacterial membranes.

Light, Copper, Action: Visible-Light Illumination Enhances Bactericidal Activity of Copper Particles

Bacteria are an old concern to human health, as they are responsible for nosocomial infections, and the number of antibiotic-resistant microorganisms keeps growing. Copper is known for its intrinsic biocidal properties, and therefore, it is a promising material to combat infections when added to surfaces. However, its biocidal properties in the presence of light illumination have not been fully explored, especially regarding the use of microsized particles since nanoparticles have taken over all fields of research and subjugated microparticles despite them being abundant and less expensive. Thus, the present work studied the bactericidal properties of metallic copper particles, in microscale (CuMPs) and nanoscale (CuNPs), in the absence of light and under white LED light illumination. The minimum bactericidal concentration (MBC) of CuMPs against Staphylococcus aureus that achieved a 6-log reduction was 5.0 and 2.5 mg mL-1 for assays conducted in the absence of light and under light illumination, respectively. Similar behavior was observed against Escherichia coli. The bactericidal activity under illumination provided a percentage increase in log reduction values of 65.2% for S. aureus and 166.7% for E. coli when compared to the assays under dark. This assay reproduced the testing CuNPs, which showed superior bactericidal activity since the concentration of 2.5 mg mL-1 promoted a 6-log reduction of both bacteria even under dark. Its superior bactericidal activity, which overcame the effect of illumination, was expected once the nanoscale facilitated the interaction of copper within the surface of bacteria. The results from MBC were supported by fluorescence microscopy and atomic absorption spectroscopy. Therefore, CuMPs and CuNPs proved to have size- and dose-dependent biocidal activity. However, we have shown that CuMPs photoactivity is competitive compared to that of CuNPs, allowing their application as a self-cleaning material for disinfection processes assisted by conventional light sources without additives to contain the spread of pathogens.

Neutron reflectometry as a powerful tool to elucidate membrane interactions of drug delivery systems

The last couple of decades have seen an explosion of novel colloidal drug delivery systems, which have been demonstrated to increase drug efficacy, reduce side-effects, and provide various other advantages for both small-molecule and biomacromolecular drugs. The interactions of delivery systems with biomembranes are increasingly recognized to play a key role for efficient eradication of pathogens and cancer cells, as well as for intracellular delivery of protein and nucleic acid drugs. In parallel, there has been a broadening of methodologies for investigating such systems. For example, advanced microscopy, mass-spectroscopic "omic"-techniques, as well as small-angle X-ray and neutron scattering techniques, which only a few years ago were largely restricted to rather specialized areas within basic research, are currently seeing increased interest from researchers within wide application fields. In the present discussion, focus is placed on the use of neutron reflectometry to investigate membrane interactions of colloidal drug delivery systems. Although the technique is still less extensively employed for investigations of drug delivery systems than, e.g., X-ray scattering, such studies may provide key mechanistic information regarding membrane binding, re-modelling, translocation, and permeation, of key importance for efficacy and toxicity of antimicrobial, cancer, and other therapeutics. In the following, examples of this are discussed and gaps/opportunities in the research field identified.

Revisiting the smart metallic nanomaterials: advances in nanotechnology-based antimicrobials

Despite significant advancements in diagnostics and treatments over the years, the problem of antimicrobial drug resistance remains a pressing issue in public health. The reduced effectiveness of existing antimicrobial drugs has prompted efforts to seek alternative treatments for microbial pathogens or develop new drug candidates. Interestingly, nanomaterials are currently gaining global attention as a possible next-generation antibiotics. Nanotechnology holds significant importance, particularly when addressing infections caused by multi-drug-resistant organisms. Alternatively, these biomaterials can also be combined with antibiotics and other potent biomaterials, providing excellent synergistic effects. Over the past two decades, nanoparticles have gained significant attention among research communities. Despite the complexity of some of their synthesis strategies and chemistry, unrelenting efforts have been recorded in synthesizing potent and highly effective nanomaterials using different approaches. With the ongoing advancements in nanotechnology, integrating it into medical procedures presents novel approaches for improving the standard of patient healthcare. Although the field of nanotechnology offers promises, much remains to be learned to overcome the several inherent issues limiting their full translation to clinics. Here, we comprehensively discussed nanotechnology-based materials, focusing exclusively on metallic nanomaterials and highlighting the advances in their synthesis, chemistry, and mechanisms of action against bacterial pathogens. Importantly, we delve into the current challenges and prospects associated with the technology.

Antimicrobial photocatalysis using bio-hydrothermally synthesized Zinc oxide nanoparticles in the management of periodontitis: a prospective split-mouth, double-blind, randomized, controlled clinical trial

BACKGROUND

The antimicrobial activity of metallic nanoparticles (NPs) has been confirmed to fight a broad spectrum of microorganisms, through antimicrobial effects that are amplified when these particles are irradiated with light of the proper wavelength. This is the first study to use phytoconjugated Zinc oxide (ZnO) NPs containing traces of active biomolecules derived from Emblica officinalis (E. officinalis) plant extract in antimicrobial photocatalysis (PCT) during non-surgical periodontal therapy.

OBJECTIVES

This study aimed to evaluate the effects of repeated PCT application in the treatment of periodontitis, using a gel containing bio-hydrothermally synthesized ZnO NPs and visible light as an adjunct to scaling and root planing (SRP).

METHODOLOGY

In total, 16 systemically healthy volunteers with stage 3 grade B generalized periodontitis were recruited for this prospective double blind, randomized placebo-controlled trial. After receiving SRP, the subjects received the following interventions in a split-mouth design at baseline, 1 week and 1 month: Group 1 - Placebo gel + Sham PCT; Group 2 - Nano ZnO gel + Sham PCT; Group 3 - Placebo gel + PCT; and Group 4 - Nano ZnO gel + PCT. The site-specific profile of Porphyromonas gingivalis in the subgingival plaque and clinical parameters (Plaque Index, Gingival Index, Gingival Bleeding Index, Probing pocket Depth and Clinical Attachment Level) were assessed at baseline, 1 month and 3 months.

RESULTS

All interventions tested caused participants' clinical and microbiological parameters to generally improve after 3 months. Subjects who received the Nano ZnO gel + PCT combination showed a sustained and progressive improvement in their treatment outcomes, a result that presented statistically significant differences from the outcomes obtained through the remaining interventions, at all time points during the study period.

CONCLUSIONS

The repeated application of PCT using bio-hydrothermally synthesized ZnO NPs can effectively complement SRP in the non-surgical treatment of Periodontitis.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Experimental Methods for the Biological Evaluation of Nanoparticle-Based Drug Delivery Risks

Many novel medical therapies use nanoparticle-based drug delivery systems, including nanomaterials through drug delivery systems, diagnostics, or physiologically active medicinal products. The approval of nanoparticles with advanced therapeutic and diagnostic potentials for applications in medication and immunization depends strongly on their synthesizing procedure, efficiency of functionalization, and biological safety and biocompatibility. Nanoparticle biodistribution, absorption, bioavailability, passage across biological barriers, and biodistribution are frequently assessed using bespoke and biological models. These methods largely rely on in vitro cell-based evaluations that cannot predict the complexity involved in preclinical and clinical studies. Therefore, assessing the nanoparticle risk has to involve pharmacokinetics, organ toxicity, and drug interactions manifested at multiple cellular levels. At the same time, there is a need for novel approaches to examine nanoparticle safety risks due to increased constraints on animal exploitation and the demand for high-throughput testing. We focus here on biological evaluation methodologies that provide access to nanoparticle interactions with the organism (positive or negative via toxicity). This work aimed to provide a perception regarding the risks associated with the utilization of nanoparticle-based formulations with a particular focus on assays applied to assess the cytotoxicity of nanomaterials.

Antibacterial Nanomaterials: Mechanisms, Impacts on Antimicrobial Resistance and Design Principles

Antimicrobial resistance (AMR) is one of the biggest threats to the environment and health. AMR rapidly invalidates conventional antibiotics, and antimicrobial nanomaterials have been increasingly explored as alternatives. Interestingly, several antimicrobial nanomaterials show AMR-independent antimicrobial effects without detectable new resistance and have therefore been suggested to prevent AMR evolution. In contrast, some are found to trigger the evolution of AMR. Given these seemingly conflicting findings, a timely discussion of the two faces of antimicrobial nanomaterials is urgently needed. This review systematically compares the killing mechanisms and structure-activity relationships of antibiotics and antimicrobial nanomaterials. We then focus on nano-microbe interactions to elucidate the impacts of molecular initiating events on AMR evolution. Finally, we provide an outlook on future antimicrobial nanomaterials and propose design principles for the prevention of AMR evolution.

Nanoparticle Impact on the Bacterial Adaptation: Focus on Nano-Titania

Titanium dioxide nanoparticles (nano-titania/TiO₂ NPs) are used in different fields and applications. However, the release of TiO₂ NPs into the environment has raised concerns about their biosafety and biosecurity. In light of the evidence that TiO₂ NPs could be used to counteract antibiotic resistance, they have been investigated for their antibacterial activity. Studies reported so far indicate a good performance of TiO₂ NPs against bacteria, alone or in combination with antibiotics. However, bacteria are able to invoke multiple response mechanisms in an attempt to adapt to TiO₂ NPs. Bacterial adaption arises from global changes in metabolic pathways via the modulation of regulatory networks and can be related to single-cell or multicellular communities. This review describes how the impact of TiO₂ NPs on bacteria leads to several changes in microorganisms, mainly during long-term exposure, that can evolve towards adaptation and/or increased virulence. Strategies employed by bacteria to cope with TiO₂ NPs suggest that their use as an antibacterial agent has still to be extensively investigated from the point of view of the risk of adaptation, to prevent the development of resistance. At the same time, possible effects on increased virulence following bacterial target modifications by TiO₂ NPs on cells or tissues have to be considered.

Mesoporous silica as a matrix for photocatalytic titanium dioxide nanoparticles: lipid membrane interactions

In the present study, we investigate the combined interaction of mesoporous silica (SiO₂) and photocatalytic titanium dioxide (TiO₂) nanoparticles with lipid membranes, using neutron reflectometry (NR), cryo-transmission electron microscopy (cryo-TEM), fluorescence oxidation assays, dynamic light scattering (DLS), and ζ-potential measurements. Based on DLS, TiO₂ nanoparticles were found to display strongly improved colloidal stability at physiological pH of skin (pH 5.4) after incorporation into either smooth or spiky ("virus-like") mesoporous silica nanoparticles at low pH, the latter demonstrated by cryo-TEM. At the same time, such matrix-bound TiO₂ nanoparticles retain their ability to destabilize anionic bacteria-mimicking lipid membranes under UV-illumination. Quenching experiments indicated both hydroxyl and superoxide radicals to contribute to this, while NR showed that free TiO₂ nanoparticles and TiO₂ loaded into mesoporous silica nanoparticles induced comparable effects on supported lipid membranes, including membrane thinning, lipid removal, and formation of a partially disordered outer membrane leaflet. By comparing effects for smooth and virus-like mesoporous nanoparticles as matrices for TiO₂ nanoparticles, the interplay between photocatalytic and direct membrane binding effects were elucidated. Taken together, the study outlines how photocatalytic nanoparticles can be readily incorporated into mesoporous silica nanoparticles for increased colloidal stability and yet retain most of their capacity for photocatalytic destabilization of lipid membranes, and with maintained mechanisms for oxidative membrane destabilization. As such, the study provides new mechanistic information to the widely employed, but poorly understood, practice of loading photocatalytic nanomaterials onto/into matrix materials for increased performance.