Membrane enhanced COD degradation of pulp wastewater using Cu2O/H2O2 heterogeneous Fenton process

In Situ Synthesis of Cu2O Nanoparticles Using Eucalyptus globulus Extract to Remove a Dye via Advanced Oxidation

Water pollution, particularly from organic contaminants like dyes, is a pressing issue, prompting exploration into advanced oxidation processes (AOPs) as potential solutions. This study focuses on synthesizing Cu2O on cellulose-based fabric using Eucalyptus globulus leaf extracts. The resulting catalysts effectively degraded methylene blue through photocatalysis under LED visible light and heterogeneous Fenton-like reactions with H2O2, demonstrating reusability. Mechanistic insights were gained through analyses of the extracts before and after Cu2O synthesis, revealing the role of phenolic compounds and reducing sugars in nanoparticle formation. Cu2O nanoparticles on cellulose-based fabric were characterized in terms of their morphology, structure, and bandgap via SEM-EDS, XRD, Raman, FTIR, UV-Vis DRS, and TGA. The degradation of methylene blue was pH-dependent; photocatalysis was more efficient at neutral pH due to hydroxyl and superoxide radical production, while Fenton-like reactions showed greater efficiency at acidic pH, primarily generating hydroxyl radicals. Cu2O used in Fenton-like reactions exhibited lower reusability compared to photocatalysis, suggesting deterioration. This research not only advances understanding of catalytic processes but also holds promise for sustainable water treatment solutions, contributing to environmental protection and resource conservation.

Removal of NO in flue gas simulated by the Fe2+/Cu2+-activated double oxidant system

⋅ O H The wet denitrification technology has a good development prospect due to its simple system and mild reaction conditions, and related research has become a hot topic in the field of flue gas purification. In this work, a novel simultaneous removal technology of NO from flue gas using Fe2+/Cu2+-catalytic H2O2/(NH4)2S2O8 system was developed for the first time. The feasibility of this new flue gas cleaning technology was explored through a series of experiments and performance analyses. The mechanism of oxidation products, free radicals and simultaneous removal of NO was revealed. The effects of the main process parameters on the removal of NO were investigated. Relevant results demonstrated that the removal efficiency of NO was elevated when the concentration of (NH4)2S2O8 or reacting temperature increased, while it was decreased after increasing the raising of Fe2+, Cu2+ and H2O2 concentrations. The main radicals were and·S O 4 - , using the electron spin resonance technique in the solution, and played a very important role in NO removal. The main products were carried out by ion chromatography and elemental N material accountancy, and the results showed that it was sulfate and nitrate in the solution, which provided theoretical guidance for the subsequent treatment and resource utilization of the absorption solution. The results of the study provided a theoretical basis for the industrial application of wet denitrification.Highlights A new green process of NO removal by a wet process with Fe2+/Cu2+ activated (NH4)2S2O8 system is proposed in this paper;Elimination mechanisms and paths of NO are elucidated;The synergistic role produced by Cu2+ and Fe2+ is beneficial to the purification of NO;The synergistic role produced by (NH4)2S2O8 and H2O2 increased the concentration of free radicals in the solution;This process jointly considers the enhanced removal of NO and recycling of transition metal ions.

Thiosulfate enhanced Cu(II)-catalyzed Fenton-like reaction at neutral condition: Critical role of sulfidation in copper cycle and Cu(III) production

Thiosulfate (S₂O₃^2-) has been proven to be an effective promoter of Fenton-like reactions by accelerating the metal ions cycle. However, up to now, little is known about the role of sulfur transformation and intermediate sulfur in the regulation of metal chemical cycle and reactive species production. Herein, free Cu(II) was selected as catalyst for the activation of H₂O₂. The introduction of S₂O₃^2- significantly enhanced the degradation of benzoic acid, and the degradation rate (k_obs) was 5.8 times that of Cu(II)/H₂O₂ system. The kinetic model revealed the transformation of sulfur species and demonstrated that sulfides (i.e., HS^-/S^2-, S₂O₃^2-) and S⁰ were the dominant electron donor for the reduction of Cu(II) into Cu(I). Consequently, the reduction and complexation roles of S₂O₃^2- significantly resolve the rate-limiting step and broaden the pH range of in Fenton-like reactions. Evidence for the critical role of high-valent copper (Cu(III)) and HO^• on BA degradation was obtained by scavengers experiments, electron paramagnetic resonance and fluorescent probes. Meanwhile, the Cu(II)/H₂O₂/S₂O₃^2- system also exhibited satisfactory anti-interference ability of the various matrix. Overall, this study offers mechanistic insight into sulfidation in Cu chemical cycle and Cu(III) generation, and highlights the potential of S₂O₃^2- for Fenton-like reactions to control pollutants.

Effect of pH on the Catalytic Degradation of Rhodamine B by Synthesized CDs/g-C3N4/Cu x O Composites

The narrow pH range of Fenton oxidation restricts its applicability in water pollution treatment. In this work, a CDs/g-C₃N₄/Cu _x O composite was synthesized via a stepwise thermal polymerization method using melamine, citric acid, and Cu₂O. Adding H₂O₂ to form a heterogeneous Fenton system can degrade Rhodamine B (Rh B) under dark conditions. The synthesized composite was characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and N₂ adsorption/desorption isotherms. The results showed that CDs, Cu₂O, and CuO were successfully loaded on the surface of g-C₃N₄. By evaluating the catalytic activity on Rh B degradation in the presence of H₂O₂, the optimal contents of citric acid and Cu₂O were 3 and 2.8%, respectively. In contrast to a typical Fenton reaction, which is favored in acidic conditions, the catalytic degradation of Rh B showed a strong pH-dependent relation when the pH is raised from 3 to 11, with the removal from 45 to 96%. Moreover, the recyclability of the composite was evaluated by the removal ratio of Rhodamine B (Rh B) after each cycle. Interestingly, recyclability is also favored in alkaline conditions and shows the best performance at pH 10, with the removal ratio of Rh B kept at 95% even after eight cycles. Through free radical trapping experiments and electron spin resonance (ESR) analysis, the hydroxyl radical (^•OH) and the superoxide radical (^•O₂ ^-) were identified as the main reactive species. Overall, a mechanism is proposed, explaining that the higher catalytic performance in the basic solution is due to the dominating surface reaction and favored in alkaline conditions.

Effluents detoxification from pulp and paper industry using microbial engineering and advanced oxidation techniques

Due to the high demand of paper and related items, pulp and paper industry is flourishing day by day. With increased production, come the hazards associated with the toxic elements present in the effluents. Various microorganisms are currently employed in the remediation of these toxic effluents. In addition, various techniques like ozonation, electrocoagulation, UV treatment, Fenton's reagent, and photo-Fenton based techniques are used in advanced oxidation processes to reduce these toxins from effluents. This review highlights various above mentioned advanced techniques and innovative processes along with the biological remediation of these toxic effluents with the help of some potential microbial consortia or their combinatory effects. Moreover, the present review will also disclose the ideas on utilizing the tools of metabolic engineering, systems biology, and artificial intelligence towards microbial engineering for relatively better bioremediation processes. In the future, these techniques might be helpful in increasing the capability of microbial consortia towards detoxification of effluents to make them environmentally safe. Finally, this review gives well-synchronized approaches to get more insights into these innovative methodologies and techniques and their use for various industrial applications.

Efficient decolorization of Methylene Blue catalyzed by MgFe-layered double hydroxides in the presence of hydrogen peroxide

MgFe-layered double hydroxides (LDHs) were prepared by co-precipitation method with the ratios of [Mg²⁺]/[Fe³⁺] varied in the range of 2:1-6:1, and occupied as heterogeneous catalysts for the degradation of Methylene Blue (MB) in the Fenton process. MgFe-LDH prepared with the ratio of [Mg²⁺]/[Fe³⁺] at 3:1 was verified to be of high purity. The Fenton-like process catalyzed by MgFe-LDH performed excellently, and more than 97% degradation of MB was obtained with 0.5 mmol/L H₂O₂ and 0.50 g/L MgFe-LDH at initial pH 2 at room temperature. The occurrence of hydroxyl radicals (·OH) was detected and the mechanism was proposed. MgFe-LDH is of excellent catalytic activity and good reusability.