Corneal changes following short-term miniscleral contact lens wear

Short-term changes in the trabecular iris angle and anterior chamber during wear of scleral lenses with different diameters

CLINICAL RELEVANCE

Scleral lens (SL) compression on the conjunctiva/episclera during wear may alter adjacent structures related to aqueous humour drainage.

BACKGROUND

The aim of this work was to assess short-term changes in the four quadrants of trabecular iris angle (TIA) and anterior chamber parameters during SL wear, using anterior segment optical coherence tomography (AS-OCT).

METHODS

Prospective study was conducted involving 16 healthy subjects with a mean age of 28 ± 5 years. Two SL of diameter 15.80 mm (L1) and 16.80 mm (L2) with the same parameters were used for 2 hours in different days. The central fluid reservoir (FR), the TIA in superior, inferior, nasal, temporal quadrants, and anterior chamber parameters; anterior chamber depth (ACD), anterior chamber width (ACW), anterior chamber area (ACAr) and anterior chamber volume (ACV) were measured with AS-OCT. These measurements were performed immediately after SL application (0 h), one hour (1 h) and two hours (2 h) of SL wear.

RESULTS

TIA decreases significantly in the superior quadrant at 2 hours of L2 wear (-5.19 ± 7.79º) (p = 0.04). In this sector, differences were also observed between the changes induced by both lenses during the 2 hours of wear (p = 0.04) and between first and second hours of wear (p = 0.04). ACD was significantly lower with L1 (-0.09 ± 0.14 mm) relative to L2 (0.00 ± 0.06 mm) between immediately after the application and 2 hours of wear (p = 0.02). A significant reduction in ACAr at 1 hour (-0.65 ± 0.75 mm2) (p = 0.01) and 2 hours of wear (-0.81 ± 1.15 mm2) (p = 0.04), as well as in ACW at 2 hours (-0.11 ± 0.14 mm) (p = 0.02) compared to immediately after application of L1 was found.

CONCLUSION

Small changes in TIA and anterior chamber occur during two hours of SL wear, but these changes are of limited clinical relevance in healthy subjects.

Changes in anterior segment after short-term scleral lens wear in healthy Chinese population

PURPOSE

To evaluate the impact of short-term scleral lens (SL) wear on anterior chamber (AC) dimension and central corneal thickness (CCT) in healthy Chinese people.

METHODS

This is a prospective, daily wear study. Eligible participants were dispensed SLs to correct refractive errors. Anterior segment (AS) parameters were measured by AS optical coherence tomography (AS-OCT) before, during, and after 2 and 4 hours of lens wear. Repeated-measures analysis of variance (ANOVA) was used to analyze the changes in AS parameters over time.

RESULTS

Twelve subjects (10 females and 2 males) with a mean age of 25.3 ± 3.8 years (ranging from 21 to 34 years) were recruited. The AC parameters, including anterior chamber depth (ACD) from the endothelium (endo-ACD), angle opening distance at 500 μm (AOD500), and trabecular-iris space area at 500 μm (TISA500), significantly decreased after wearing SLs for 4 hours (P<0.05). CCT increased by 12 μm (2.29 %) after wearing SLs for 4 hours (P=0.013).

CONCLUSION

This study suggests that SL wear has a significant impact on AS dimensions in patients with healthy corneas in the short term with SL in situ, but tend to recover quickly after SL removal. Further research is needed to determine whether the change in AS dimensions during SL wear affects aqueous humor (AH) outflow and causes changes in intraocular pressure (IOP).

Scleral lens induced short term corneal changes in eyes with Pellucid Marginal Degeneration

PURPOSE

To investigate the short-term effect of scleral lens (SL) on corneal curvature and corneal oedema in Pellucid Marginal Degeneration (PMD) eyes.

METHODS

Corneal anterior, posterior curvature and corneal thickness were measured in 14 eyes of 14 PMD participants with Schiempflug imaging at different corneal diameters and meridians at baseline and after 6 h of SL wear.

RESULTS

There was a significant flattening (up to 0.26 mm) of the anterior corneal curvature noted in the inferotemporal quadrant (from 210 to 255 degree at 2 mm, 8 mm and 10 mm corneal diameter), inferonasal quadrant (from 285 to 345 degree at 6 mm and 8 mm corneal diameter), and inferiorly at 2 mm and 10 mm corneal diameter (p < 0.05). Similarly, posterior corneal curvature showed statistically significant steepening mostly in inferotemporal quadrants (from 195 to 255 degree from 4 mm to 8 mm corneal diameter) and inferonasally at 2 mm and 4 mm corneal diameter (p < 0.05). A statistically significant increase in the corneal thickness noted in different corneal diameters with corneal oedema ranging from 2.10 % to 4.00 % after 6 h of SL wear. A gradual increase in corneal oedema was noted form centre to periphery. The baseline central fluid reservoir thickness (FRT) was 341.07 ± 139.8 which reduced to 276.71 ± 114.32 µm after 6 h of lens wear. No significant correlation was noted between corneal oedema with different parameters like initial and final FRT, change in anterior and posterior corneal curvature, and lens thickness (p > 0.05).

CONCLUSIONS

Short-term SL wear induced a clinically acceptable range of corneal oedema. A clinically significant flattening in anterior curvature and minimal steepening in posterior curvature were noted. Practitioners should be careful while measuring corneal parameters in PMD eyes wearing SL, as these alterations can provide false impression of disease progression.

Central and peripheral scleral lens-induced corneal oedema

PURPOSE

To quantify the magnitude of central and peripheral scleral lens-induced corneal oedema for a range of fluid reservoir thicknesses, and to compare these experimental results with theoretical models of corneal oedema both with and without limbal metabolic support (i.e., the lateral transport of metabolites and the influence of the limbal vasculature).

METHODS

Ten young healthy participants wore scleral lenses (KATT™, Capricornia Contact Lenses) fitted with low (mean 141 μm), medium (482 μm) and high (718 μm) central fluid reservoir thickness values across three separate study visits. The scleral lens thickness, fluid reservoir thickness and stromal corneal oedema were measured using optical coherence tomography. Oedema was quantified across the central (0-2.5 mm from the corneal apex) and peripheral (1.25-3 mm from the scleral spur) cornea. Experimental data were compared with published theoretical models of central to peripheral corneal oedema.

RESULTS

Stromal oedema varied with fluid reservoir thickness (p < 0.001) for both central and peripheral regions. The mean (standard deviation) stromal oedema was greater for the medium (2.08 (1.21)%) and high (2.22 (1.31)%) fluid reservoir thickness conditions compared to the low condition (1.00 (1.01)%) (p ≤ 0.01). Stromal oedema gradually increased from the corneal centre to the periphery by ~0.3% on average (relative increase of 18%), but the change did not reach statistical significance. This trend of increasing, rather than decreasing, oedema towards the limbus is consistent with theoretical modelling of peripheral oedema without metabolic support from the limbus.

CONCLUSIONS

The central and peripheral cornea displayed a similar magnitude of oedema, with increasing levels observed for medium and high fluid reservoir thicknesses. The gradual increase in oedema towards the limbus is consistent with a 'without limbal metabolic support' theoretical model.

Anterior, Posterior, and Thickness Cornea Differences after Scleral Lens Wear in Post-LASIK Subjects for One Year

The aim of this study is to analyze the anterior and posterior corneal surface shape and the corneal thickness difference outcomes between before and after scleral lens (ScCL) wear in post-LASIK ectasia subjects for one year. Twenty eyes with post-LASIK ectasia wearing scleral lenses were evaluated in a visit before contact lens and after 1, 6, and 12 months. The study variables analyzed included the apex, nasal, temporal, inferior, and superior corneal thickness; the anterior and posterior surface corneal at corneal diameters of 8, 6, 4, and 2 mm, and high-contrast visual acuity. A statistically significant increment of corneal thickness (p < 0.05) was observed in the inferior area after 6 months and in the superior area in the 12-month follow-up after wearing ScCLs. The anterior corneal curvature presented a flattening and a statistically significant steepening (p < 0.05) in the central and peripheral radii, respectively, after one year. The posterior corneal curvature showed a significant (p < 0.05) steepening, which mainly affected the central region after one year. Despite these changes, high-contrast visual acuity with ScCL correction remained at the same values. The prolonged use of scleral lenses in post-LASIK subjects showed significant changes in the corneal curvature and thickness. These outcomes recommend more detailed and periodic topographic and vision quality checks to monitor the wear in ScCL patients.

Ocular Surface Homeostasis After Scleral Lens Usage

OBJECTIVES

The aim of this prospective study is to examine the effects of 5 hours of well-fitted, mini-scleral contact lens (mini-SL) wear on the tear film cytokine expression in healthy eyes.

METHODS

Twenty-three healthy participants were included in the study. One eye of each participant was selected at random, and a mini-SL measuring 16.5 mm in diameter was fitted by an experienced contact lens specialist. The contact lens remained in place for 5 hours. Precorneal tear fluid was collected using capillary tubes at three different time points: baseline before SL insertion (T0), after 5 hours of SL wear (T1), and 3 hours after SL removal (T2). The concentration of 40 inflammatory cytokines at the three different time points was determined using multiplex bead assay.

RESULTS

Mini-scleral lens wear did not result in significant changes in the cytokine-to-protein ratio after 5 hours of wear on a healthy eye.

CONCLUSIONS

Although a well-fitted mini-SL reduces the rate at which the precorneal tear film is refreshed, 5 hours of lens wear did not appear to significantly affect the tears cytokine-to-protein ratio, suggesting that scleral lenses have minimal impact on corneal cytokine expression.

Development of corneal contact lens materials and current clinical application of contact lenses: A review

Unlike conventional glasses, corneal contact lenses (CLs) can directly contact the surface of the tear film through the application of biopolymer materials, to achieve therapeutic and cosmetic purposes. Since the advent of polymethylmethacrylate, a material that has gained widespread use and attention, statistically, there are now more than 150 × 106 people around the world who wear corneal contact lenses. However, the associated complications caused by the interaction of contact lenses with the ocular surface, tear film, endogenous and environmental microorganisms, and components of the solution affect nearly one-third of the wearer population. The application of corneal contact lenses in correcting vision and myopia control has been widely recognized. With the development of related materials, corneal contact lenses are applied to the treatment of ocular surface diseases, including corneal bandage lenses, drug-loaded corneal contact lenses, biosensors, and other new products, while minimizing the side effects associated with CL wear. This paper summarized the development history and material properties of CLs, focused on the current main clinical applications and mechanisms, as well as clarified the possible complications in wearing therapeutic contact lenses and the direction for improvement in the future.

Assessment by Optical Coherence Tomography of Short-Term Changes in IOP-Related Structures Caused by Wearing Scleral Lenses

BACKGROUND

The mechanism that could increase intraocular pressure (IOP) during scleral lens (SL) wear is not fully understood, although it may be related to compression of the landing zone on structures involved in aqueous humor drainage.

METHODS

Thirty healthy subjects were fitted with two SLs of different sizes (L1 = 15.8 mm, L2 = 16.8 mm) for 2 h in the right eye and left eye as a control. Central corneal thickness (CCT), parameters of iridocorneal angle (ICA), Schlemm's canal (SC), and optic nerve head were measured before and after wearing both SLs. IOP was measured with a Perkins applanation tonometer before and after lens removal and with a transpalpebral tonometer before, during (0 h, 1 h, and 2 h), and after lens wear.

RESULTS

CCT increased after wearing L1 (8.10 ± 4.21 µm; p < 0.01) and L2 (9.17 ± 4.41 µm; p < 0.01). After L1 removal, the ICA parameters decreased significantly (p < 0.05). With L2 removal, nasal and temporal SC area and length were reduced (p < 0.05). An increased IOP with transpalpebral tonometry was observed at 2 h of wearing L1 (2.55 ± 2.04 mmHg; p < 0.01) and L2 (2.53 ± 2.22 mmHg; p < 0.01), as well as an increased IOP with Perkins applanation tonometry after wearing L1 (0.43 ± 1.07 mmHg; p = 0.02).

CONCLUSIONS

In the short term, SL resulted in a slight increase in IOP in addition to small changes in ICA and SC parameters, although it did not seem to be clinically relevant in healthy subjects.

Influence of Specialty Contact Lens Wear on Posterior Corneal Tomography in Keratoconus Subjects

OBJECTIVE

To evaluate the effect of specialty contact lens (CL) wear on posterior corneal tomography in keratoconus subjects.

METHODS

Patients with keratoconus who were wearing specialty CL were included in this retrospective cohort study. Tomographic parameters were evaluated with Scheimpflug imaging (Pentacam HR) before lens fitting and immediately after removal of CLs worn habitually for a period of several months. Subjects were divided into groups, according to type of lens (corneal, scleral, and hybrid) and keratoconus severity based on Belin/Ambrosio D (BAD-D) score, for further analysis.

RESULTS

Thirty-four eyes of 34 subjects diagnosed with keratoconus were included. Mean duration of habitual CL wear was 7.0±0.3 months. For the entire cohort, a small increase in flat keratometric reading at the anterior corneal surface (K1F; P =0.032) and at the posterior surface (K1B; P =0.041) was found. In the corneal CL group (10 eyes; 29.4%), flattening of the anterior corneal curvature was detected (K max ; P =0.015). An increase in K1B value was seen in the scleral CL group (15 eyes; 44.1%) ( P =0.03). Combined topometric indices showed a small but significant difference in the entire cohort ( P <0.05) and in the subgroups of corneal CL wear and of moderate keratoconus (BAD-D score≥7).

CONCLUSION

Various types of specialty CLs exert a differential influence on corneal parameters. A small steepening of keratometry at the posterior surface (K1B) was observed in the scleral lens group. Although corneal lens wear flattens the anterior cornea (K max ), it does not significantly alter the posterior corneal surface.

The effect of different thickness scleral lens on corneal parameters in eyes with keratoconus

Purpose

To investigate the impact of different-thickness scleral lenses (SLs) on corneal thickness, curvature, and fluid reservoir thickness in keratoconic eyes.

Methods

Schiempflug imaging and AS-OCT was captured before and immediately following 6 h of SL wear. Different-thickness lenses were used while keeping the other parameters the same. The timing of the measurement for day 1 and day 2 was matched to allow for the control of the confounding influence of diurnal variation.

Results

Immediately after 6 h of lens wear, no statistically significant difference (P > 0.05) was noted in corneal edema in any region and quadrants between thin- and thick-lens wearers. The calculated percentage of corneal edema was also within the range of overnight closed eye physiological swelling. Pentacam measured higher central corneal thickness compared to AS-OCT in both baselines and after 6 h of lens wear. The current investigation reported minimal but not statistically significant (P > 0.05) flattening in anterior and steepening in posterior curvature parameters in both thin and thick SLs. The mean reduction in the fluid reservoir thickness was 80.00 ± 3.99 and 79.36 ± 3.84 microns after 6 h of thin- and thick-lens wear, respectively, which was not statistically significant (P > 0.05). A statistically significant positive correlation (r = 0.67, P = 0.02) was found between lens thickness and change in anterior steep k with thick-lens wear.

Conclusion

Central lens thickness of 200-400 μm did not cause any significant change in corneal curvature and fluid reservoir thickness and did not induce clinically significant corneal edema after short-term SL wear.

Optical Impact of Corneal Clearance in Healthy Eyes Fitted with Scleral Contact Lenses: A Pilot Study

This pilot study was conducted to evaluate the effect on refraction and optical quality of the increase in the corneal clearance after fitting a specific model of scleral contact lens (ScCL) in healthy subjects. A total of 15 eyes from 15 subjects were enrolled in the study, with evaluation of refraction, ocular aberrations and central corneal clearance with the same model of ScCL (ICD Toric, Paragon Vision Science, Gilbert, AZ, USA), but using 3 different sagittal heights: 4200, 4500 and 4800 µm. Mean values of corneal clearance for each ScCL fitted were 418.1 ± 112.1, 706.5 ± 120.3 and 989.9 ± 117.0 µm, respectively. Significant changes were detected in the spherical equivalent and high-order aberrations, especially coma and spherical aberration, when fitting ScCLs of increasing sagittal heights compared to the pre-fitting values. In conclusion, the increase in central corneal clearance when fitting ScCLs affects refraction, leading to a more myopic refractive error, and inducing an increase in different ocular HOAs. This should be considered when fitting ScCLs, especially multifocal designs.

Corneal Biomechanics and Intraocular Pressure Following Scleral Lens Wear in Penetrating Keratoplasty and Keratoconus

OBJECTIVE

To compare corneal biomechanics and intraocular pressure (IOP) in keratoconus and penetrating keratoplasty eyes before and after nonfenestrated scleral lens wear.

METHODS

Twenty-three participants were enrolled, and 37 eyes were included in the analysis (11 penetrating keratoplasty and 26 keratoconus). A range of corneal biomechanical parameters and IOP were measured using the CORVIS ST before and after 8 hr of nonfenestrated scleral lens wear (Keracare, Acculens, Denver, CO).

RESULTS

Before lens wear, penetrating keratoplasty eyes displayed significantly greater median values for central corneal thickness (97 μm thicker, P=0.02), IOP (3.89 mm Hg higher, P=0.01), and biomechanical parameter A2 length (0.48 mm longer, P=0.003) compared with keratoconic eyes. No significant changes in corneal biomechanical parameters or IOP were observed after scleral lens wear in either group (all P>0.05).

CONCLUSION

Although nonfenestrated scleral contact lenses can induce a subatmospheric pressure after lens settling and compress tissue surrounding the limbus, no significant changes were detected in the corneal biomechanical parameters studied using CORVIS ST after scleral lens wear in eyes with penetrating keratoplasty and keratoconus.

Impact of Scleral Lens on Corneal Curvature and Pachymetry in Keratoconic Eyes

PURPOSE

The aim of this study was to evaluate the influence of scleral lens on corneal curvature and corneal thickness in keratoconic patients.

METHODS

Scheimpflug imaging was captured before lens insertion, immediately after removal at 6 hours, and, again, the next day morning. Anterior flat, steep, and maximal keratometry (Kflat, Ksteep, and Kmax, respectively) and pachymetry values were compared.

RESULTS

Minimal corneal flattening was observed for all 3 curvature parameters immediately after lens removal but was not statistically significant. The average Kflat was 0.28 ± 0.31 (D) flatter (P = 0.37), Ksteep was 0.37 ± 0.09 (D) flatter (P = 0.11), and Kmax was 0.19 ± 0.24 (D) flatter (P = 0.53), which returned to baseline level after one night of lens removal. After 6 hours of a 16-mm scleral lens wear, central corneal pachymetry showed that a marginal thickening of 7.76 ± 3.00 μm (P = 0.06) was causing 1.77 ± 0.67% of corneal edema, which returned to baseline after one night of lens removal. There was no significant correlation noted between corneal flattening and change in corneal thickness (r = 0.09, P = 0.78) and between central corneal clearance and change in corneal curvature (r = -0.23, P = 0.51).

CONCLUSIONS

Minimal transient alteration in the anterior corneal curvature and corneal thickness was observed after 6 hours of scleral lens wear. These temporary changes regressed to baseline after overnight discontinuation of the lens.

How Can We Best Measure the Performance of Scleral Lenses? Current Insights

Scleral lenses (SLs) present several unique advantageous characteristics for patients. As these lenses are mainly fitted in severely diseased eyes, a thorough evaluation of the ocular surface before and after SL fitting and the on-eye SL fitting evaluation are essential and help minimize potential physiological complications. This review will explore the current and emerging techniques and instrumentation to best measure SL performance ensuring optimal lens fitting, visual quality, comfort and physiological responses, highlighting some potential complications and follow-up recommendations. A single physician could perform the great majority of evaluations. Still, the authors consider that the assessment of SL fitting should be a collaborative and multidisciplinary job, involving contact lens practitioners, ophthalmologists and the industry. This publication has reviewed the most up-to-date work and listed the most used techniques; however, the authors encourage the development of more evidence-based recommendations for SL clinical practice.

Keratoconus: An updated review

Keratoconus is a bilateral and asymmetric disease which results in progressive thinning and steeping of the cornea leading to irregular astigmatism and decreased visual acuity. Traditionally, the condition has been described as a noninflammatory disease; however, more recently it has been associated with ocular inflammation. Keratoconus normally develops in the second and third decades of life and progresses until the fourth decade. The condition affects all ethnicities and both sexes. The prevalence and incidence rates of keratoconus have been estimated to be between 0.2 and 4,790 per 100,000 persons and 1.5 and 25 cases per 100,000 persons/year, respectively, with highest rates typically occurring in 20- to 30-year-olds and Middle Eastern and Asian ethnicities. Progressive stromal thinning, rupture of the anterior limiting membrane, and subsequent ectasia of the central/paracentral cornea are the most commonly observed histopathological findings. A family history of keratoconus, eye rubbing, eczema, asthma, and allergy are risk factors for developing keratoconus. Detecting keratoconus in its earliest stages remains a challenge. Corneal topography is the primary diagnostic tool for keratoconus detection. In incipient cases, however, the use of a single parameter to diagnose keratoconus is insufficient, and in addition to corneal topography, corneal pachymetry and higher order aberration data are now commonly used. Keratoconus severity and progression may be classified based on morphological features and disease evolution, ocular signs, and index-based systems. Keratoconus treatment varies depending on disease severity and progression. Mild cases are typically treated with spectacles, moderate cases with contact lenses, while severe cases that cannot be managed with scleral contact lenses may require corneal surgery. Mild to moderate cases of progressive keratoconus may also be treated surgically, most commonly with corneal cross-linking. This article provides an updated review on the definition, epidemiology, histopathology, aetiology and pathogenesis, clinical features, detection, classification, and management and treatment strategies for keratoconus.

OCT applications in contact lens fitting

Optical Coherence Tomography (OCT) is a noninvasive, high-speed, high-resolution imaging technology based in the Michaelson interferometry. A near-infrared light beam is used to register the intensity variations for the light backscattered on each sample layer. Due to the high repeatability on corneal measurements, spectral domain OCT (SD-OCT) is the gold standard when talking about in vivo, non-invasive anterior segment imaging. Changes in the morphology of various ocular surfaces such as the cornea, conjunctiva, limbus or tear film with soft (SCL), rigid, corneal or scleral lens (SL) wear can be described by OCT measurements. For instance, evaluation of the corneoscleral region is essential on SL fitting. For orthokeratology lenses central epithelial thinning and peripheral thickening and their regression could be quantified with OCT after Ortho-K lens wear. Blood vessel compression on the landing zone as well as vault thickness and fluid reservoir (FR) turbidity could be imaged with OCT. Tear film evaluation on contact lens wearers is essential because its use could lead to variations on the biochemical components in tears. Changes in tear meniscus dynamics and several parameters such as volume (TMV), tear meniscus height (HMT) and turbidity could be determined with OCT and positively correlated with the instillation of different ophthalmic solutions with Non-Invasive Break Up Time (NIBUT) and Schirmer test values. This manuscript shows the increasing applicability of OCT technology for the in vivo characterization of contact lens fitting and interaction with the ocular surface in a faster, safer and non-invasive way. Future research will still allow exploring OCT imaging to its full potential in contact lens practice, as there is still a significant amount of information contained in the images that are not yet easy to extract, analyze and give clinical value.

CLEAR - Scleral lenses

Scleral lenses were the first type of contact lens, developed in the late nineteenth century to restore vision and protect the ocular surface. With the advent of rigid corneal lenses in the middle of the twentieth century and soft lenses in the 1970's, the use of scleral lenses diminished; in recent times there has been a resurgence in their use driven by advances in manufacturing and ocular imaging technology. Scleral lenses are often the only viable form of contact lens wear across a range of clinical indications and can potentially delay the need for corneal surgery. This report provides a brief historical review of scleral lenses and a detailed account of contemporary scleral lens practice including common indications and recommended terminology. Recent research on ocular surface shape is presented, in addition to a comprehensive account of modern scleral lens fitting and on-eye evaluation. A range of optical and physiological challenges associated with scleral lenses are presented, including options for the clinical management of a range of ocular conditions. Future applications which take advantage of the stability of scleral lenses are also discussed. In summary, this report presents evidence-based recommendations to optimise patient outcomes in modern scleral lens practice.

Evaluation of corneal topography, tear film function and conjunctival impression cytology after long-term scleral contact lens wear in keratoconus patients

Purpose: To investigate the impact of long-term scleral contact lens (ScCL) wear on corneal curvature, corneal thickness, tear film function, and ocular surface in patients with keratoconus.Methods: Sixteen keratoconus patients wearing ScCLs for 6 months were enrolled in the study. Corneal topography, tear osmolarity test, Schirmer 1 test, tear film break-up time (TBUT) test, and impression cytology analysis were assessed at baseline and follow-up examinations.Results: There were no significant differences in visual acuity, keratometric and pachymetric values after 6 months of ScCL wear compared to baseline (p>0.05 for all). Tear osmolarity, Schirmer 1 test, and TBUT test results showed no significant change during follow-up (p>0.05 for all). Median goblet cell density and grade of squamous metaplasia did not differ significantly at 1-month. However, there was a gradual deterioration in goblet cell density and Nelson grade until the third-month visit compared to baseline (p for goblet cell, p=0.003; p for Nelson grade, p=0.003). These impaired cytological features observed at 3-month visit persisted at 6-month visit (p for goblet cell, p=0.008; p for Nelson grade, p<0.001).Conclusion: Six months of ScCL wear did not induce any changes in corneal curvature and thickness and also did not affect tear function tests in keratoconic eyes. The only significant changes observed were a decrease in goblet cell density and metaplastic changes in conjunctival epithelium in impression cytology analysis. Further investigations may be needed to better understand the cause of impairment in cytological features of ocular surface and its clinical implications.

Corneal tissue properties following scleral lens wear using Scheimpflug imaging

Purpose

To investigate the effect of short‐term scleral lens wear on the corneal stroma at a macroscopic (thickness) and microscopic (within tissue) level, including regional variations.

Methods

Fourteen young, healthy participants wore a rotationally symmetric, 16.5 mm diameter, scleral lens for 8 h. Scheimpflug images were captured before, and immediately after, lens wear, and also on a second day (without lens wear) to quantify natural corneal diurnal variations. After corneal segmentation, pixel intensities of the stromal tissue were statistically modelled using a Weibull probability density function from which parameters α and β were derived.

Results

Both α and β parameters increased significantly following scleral lens wear (by 5.7 ± 10% and 6.5 ± 6.5%, respectively, both p < 0.01). Corneal thickness also increased slightly following lens wear (mean increase 0.49 ± 1.77%, p = 0.01); however, the change in α and β parameters did not correlate with the magnitude of corneal swelling. On the control day, small but significant corneal thinning was observed (−0.82 ± 1.1%, p = 0.03), while α and β parameters remained stable. Both microparameters varied significantly across the cornea, with α decreasing (−15.4 ± 0.7%) and β increasing towards the periphery (+4.4 ± 2.6%) (both p < 0.001).

Conclusion

Corneal microparameters α and β varied regionally across the cornea and displayed a statistically significant increase following short‐term scleral lens wear, but remained stable between morning and evening measurements taken during a control day without lens wear. These corneal microparameters may be a useful metric to quantify subclinical corneal changes associated with low level hypoxia.

Anatomical and physiological considerations in scleral lens wear: Conjunctiva and sclera

While scleral lenses have been fitted using diagnostic lenses or impression moulding techniques for over a century, recent advances in anterior segment imaging such as optical coherence tomography and corneo-scleral profilometry have significantly improved the current understanding of the anatomy of the anterior eye including the morphometry of the conjunctiva, sclera, and corneo-scleral junction, as well as the ocular surface shape and elevation. These technological advances in ocular imaging along with continual improvements and innovations in scleral lens design and manufacturing have led to a global increase in scleral lens prescribing. This review provides a comprehensive overview of the conjunctiva and sclera in the context of modern scleral lens practice, including anatomical variations in healthy and diseased eyes, the physiological impact of scleral lens wear, potential fitting challenges, and current approaches to lens modifications in order to minimise lens-induced complications and adverse ocular effects. Specific topics requiring further research are also discussed.

Intraocular pressure changes in neophyte scleral lens wearers: A prospective study

PURPOSE

To examine the variation in intraocular pressure (IOP) during the first six months of scleral lens wear.

METHODS

Thirty-two neophyte scleral lens wearers were recruited and IOP was measured using Goldman applanation tonometry before, and after 1 and 6 months of scleral lens wear (following lens removal). All scleral lenses were designed based on scleral topography or an impression of the ocular surface. Central corneal thickness and the central post-lens fluid reservoir thickness were quantified using optical coherence tomography.

RESULTS

Post-lens removal IOP displayed an increasing trend after 1 and 6 months of lens wear, but the magnitude of change was not clinically or statistically significant using several repeated measures analyses to account for sporadic missing longitudinal data (mean increase of 1 mmHg or less, p > 0.05). Central corneal thickness and the central post-lens fluid reservoir remained stable throughout the first six months of lens wear.

CONCLUSION

IOP measured following lens removal did not vary significantly during the first 6 months of lens wear in scleral lens neophytes. Further research is required to determine if IOP varies during lens wear, following lens removal, or after longer-term lens wear due to suction forces or tissue compression beneath the landing zone.

Scleral lens wear following penetrating keratoplasty: changes in corneal curvature and optics

PURPOSE

Visual rehabilitation following penetrating keratoplasty is the primary indication for approximately 15% of all scleral lens fittings. Since corneal biomechanics are altered following penetrating keratoplasty, the aim of this study was to quantify changes in anterior corneal optics following short-term scleral lens wear in eyes with corneal grafts.

METHODS

Scheimpflug images were obtained before and after a period of scleral lens wear (mean 6.3 ± 1.4 h), from eyes that had previously undergone penetrating keratoplasty (10 eyes of nine participants, mean age 31 ± 9 years). Corneal power and thickness data were examined over the central 6 mm, including regional analyses of the central (0-3 mm) and the mid-peripheral cornea (3-6 mm annulus) using customised software to deterime corneal power vectors M (best fit sphere), J₀ (90/180 astigmatism) and J₄₅ (45/135 astigmatism). Anterior corneal aberrations were extracted using corneal elevation data.

RESULTS

Corneal power vector J₄₅ increased following lens wear (by 0.22 ± 0.05 D, p = 0.003) across the central 6 mm, while M displayed regional variations following lens wear indicating larger changes further from the corneal centre (p = 0.004). The change in corneal power vector M was also correlated with the magnitude of central corneal swelling (r = 0.65, p = 0.04). The anterior corneal aberration terms of oblique astigmatism, hoirzontal coma, and spherical aberration also varied following lens wear (all p ≤ 0.01). The mean change in the corneal spherocylinder derived from the elevation data following lens wear was +0.14/-0.54 × 44 for a 6 mm corneal diameter.

CONCLUSIONS

Clinically significant alterations in anterior corneal topography and higher order aberrations were observed following short-term scleral lens wear in eyes that had undergone penetrating keratoplasty. Spherocylindrical changes were approximately double the magnitude and more oblique in orientation compared to previous reports of healthy eyes. Changes in corneal power vector M may be related to epithelial corneal oedema.

The impact of short-term fenestrated scleral lens wear on intraocular pressure

PURPOSE

To examine the influence of short-term fenestrated scleral lens wear on intraocular pressure (IOP) in healthy eyes.

METHODS

IOP was measured before, during, and after a brief period (1-2 min) of fenestrated, scleral lens wear, using a rebound tonometer, in fifty, young healthy adults (mean age 23 ± 4 years) with normal corneas.

RESULTS

Immediately following lens insertion, 48 of the 50 (96 %) of participants displayed an increase in IOP (mean ± SD increase in these participants of 3.8 ± 2.0 mmHg). Immediately following lens removal, 50 % of participants displayed a reduction in IOP, equal to or lower than, the pre-insertion IOP (-1.0 ± 0.8 mmHg lower than baseline). The remaining 50 % of participants displayed an IOP slightly greater than the pre-insertion IOP (1.6 ± 1.0 mmHg greater) after lens removal.

CONCLUSIONS

Short-term fenestrated scleral lens wear resulted in a small, but statistically significant, increase in IOP in 96 % of young healthy participants (< 4 mmHg on average), which decreased to a level similar to pre-lens insertion IOP levels immediately following lens removal. Further research is required to determine if this measured change in IOP during scleral lens wear is artefactual, or an elevation in the true IOP.

Anterior segment optical coherence tomography scanning protocols and corneal thickness repeatability

PURPOSE

To examine the influence of anterior segment optical coherence tomography imaging protocols on the intraobserver and intrasession repeatability of epithelial, stromal, and total corneal thickness measurements.

METHODS

Repeated anterior segment optical coherence tomography (AS-OCT) images (Spectralis, Heidelberg) were obtained from 15 adults using single 8.3 mm wide horizontal line scans with an average of 2, 10, 20, 30, 50 and 100 B-scans. Volumetric scans consisting of nine 8.3 mm horizontal line scans encompassing a 1.3 mm vertical region were also captured (with 20 B-scans per line scan). Single point thickness measures (at the normal to the tangent of the anterior corneal surface) were compared with thickness measures averaged over the central 6 mm. The impact of B-scan averaging and intraobserver variability were examined for single line scans. For volumetric scans, the impact of the number of line scans upon intraobserver and intrasession variability were calculated.

RESULTS

Intraobserver repeatability did not vary significantly as a function of the number of averaged B-scans per line scan, but was lowest for 20-30 averaged B scans. For volumetric scans, increasing the number of line scans did increase scan duration (p < 0.001), with minimal impact upon the average scan quality index (p = 0.06). Averaging more than 3 line scans did not significantly improve intraobserver or intrasession repeatability for either single point or average thickness measurements.

CONCLUSION

AS-OCT volumetric scans with 3 lines each consisting of 20 B-scans with measurements averaged over a central 6 mm of the cornea provide highly repeatable measures of epithelial, stromal and total corneal thickness (95 % LoA ≤ ±3.2 μm for intraobserver repeatability and ≤ ±3.7 μm for intrasession repeatability). This scanning protocol can provide reliable information when monitoring subtle changes in corneal thickness.

Effect of Scleral Lenses on Corneal Topography in Keratoconus: A Case Series of Cross-Linked Versus Non-Cross-Linked Eyes

PURPOSE

To evaluate the changes in anterior corneal topography induced by short-time wear of scleral contact lenses (SLs) in keratoconic subjects with and without a history of corneal cross-linking (CXL).

METHODS

Nine keratoconic patients (14 eyes) were fitted with 18.5 mm SLs for optical rehabilitation. Subjects were divided into 2 groups: 7 eyes without a history of CXL (Non-CXL group) and 7 with a history of CXL (CXL group). Corneal topography was performed at baseline and after 2 and 5 hours of lens wear. The differences for simulated flat (Kflat), steep (Ksteep) and maximal (Kmax) corneal curvatures, central corneal astigmatism (CCA), and central cornea thickness were evaluated.

RESULTS

No statistically significant difference was detected between Non-CXL and CXL groups in any of these measures. Statistically significant flattening was detected in Ksteep Repeated measures analysis of variance ([RM-ANOVA), F (2,24) = 11.32, P < 0.0001], CCA [RM-ANOVA, F (2,24) = 15.34, P < 0.0001], and Kmax [RM-ANOVA, F (2,24) = 19.10, P < 0.0001). From baseline to 5 hours of SL wear, Ksteep decreased on average from 53.1 to 52.4 D, Kmax decreased from 56.7 to 55.8 D, and CCA decreased from 7.2 to 6.3 D. Kmax showed a trend toward more flattening in the Non-CXL group. Central cornea thickness showed significant thickening over time from baseline (451 μm) to 5 hours (458 μm) of SL wear [RM-ANOVA, F (1,12) = 319.3, P < 0.0001].

CONCLUSIONS

Short-term scleral lens wear in keratoconic patients may cause flattening of the anterior cornea. A history of CXL treatment does not guarantee corneal shape stability after scleral lens wear. Practitioners should be aware of these changes because scleral lens wear may mask the signs of keratoconus progression.

Scleral Lens Issues and Complications Related to a Non-optimal Fitting Relationship Between the Lens and Ocular Surface

INTRODUCTION

The advent of high oxygen permeability (Dk) of rigid contact lens materials has reduced complications related to hypoxia when using scleral contact lenses (ScCLs). However, new issues and complications have emerged. Some of these issues and complications are caused by the nonoptimal fitting relationship with the underlying ocular surface, which may pose a challenge in their management.

METHOD

PubMed searches using different keywords and an investigation into the issues and complications etiology were conducted. Detailed guidelines for their management are provided.

RESULTS

The literature provides a few reports of severe adverse reactions to ScCLs. The most common issues, unique to ScCL wear, have been described. Likewise, other anomalies in ScCL fitting may affect patient satisfaction and lead to drop out, promoting eye surgery or dramatic psychological effects. The management of these issues and complications may be also frustrating for clinicians who will, in turn, rarely, or not at all, prescribe them.

CONCLUSION

Scleral contact lenses intimidate practitioners because of their large diameter and the lack of knowledge in regard to the fitting process but especially because of the challenging management of issues and complications that may occur relating to the lens fitting relationship with the underlying ocular surface. A detailed description of the etiology and management of these anomalies will allow practitioners to gain more confidence in fitting ScCLs and prescribe them more often. Patients are the primary beneficiaries from wearing these large rigid lenses; ScCLs represent a life-changing event for many patients.

Anterior Corneal Curvature and Aberration Changes After Scleral Lens Wear in Keratoconus Patients With and Without Ring Segments

OBJECTIVE

To evaluate changes in the anterior corneal curvature and aberrometry after scleral contact lens wear in keratoconus (KC) subjects with and without intracorneal ring segments (ICRS).

METHODS

Twenty-six subjects diagnosed with keratoconus were selected to participate in the study. Subjects were divided into 2 groups, those with ICRS (KC-ICRS group) and those without ICRS (KC group). Subjects were instructed to wear 16.5-mm scleral lenses for 8 hours. Topographic and aberrometric parameters were evaluated before lens wear and immediately after lens removal. Anterior corneal curvature was evaluated at corneal diameters of 2, 4, 6, and 8 mm, and corneal aberrations were measured at 4-, 6-, and 8-mm pupil diameters.

RESULTS

The mean age of subjects was 36.95±8.95 years. In KC group, there was a statistically significant flattening of the central corneal curvature, from 6.98 to 7.09 mm (P<0.05). No changes were found in the central corneal curvature in the KC-ICRS group. The KC group showed anterior corneal curvature flattening, mainly in the nasal quadrant. The KC-ICRS group showed flattening primarily in the inferior hemisphere. In the KC group, spherical aberration for 6-mm pupil increased significantly. In the KC-ICRS group, changes in aberrations were significant for high-order root mean square at 4- and 6-mm pupil diameters (P<0.05), for oblique astigmatism for 4 mm and 6 mm, and for vertical coma for 4-mm pupil (P<0.05).

CONCLUSION

Short-term scleral lens wear showed flattening of the anterior corneal surface in all subjects. In the KC group, the flattening was more pronounced in the nasal quadrant while changes were more pronounced inferiorly in KC-ICRS group.

In vivo assessment of the anterior scleral contour assisted by automatic profilometry and changes in conjunctival shape after miniscleral contact lens fitting

PURPOSE

To compare the shape of the anterior sclera of candidates to scleral lens (ScCL) fitting with regular and irregular corneas and analyze the changes induced in the shape of the sclero-conjunctiva after ScCL wear.

METHODS

Thirty-five eyes of 18 subjects (19 eyes with irregular corneas and 16 with regular corneas) were consecutively recruited. Three measures of sclero-conjunctival shape were taken with Eye Surface Profiler (ESP, Eaglet Eye, Houten, The Netherlands). Tangent angles and ocular sagittal heights (OC-SAG) were analyzed at different chords from 13 to 17mm in the nasal, temporal, superior and inferior regions. The 19 eyes with irregular cornea were selected to wear ScCL and the changes in their sclero-conjunctival surface parameters were compared before and after 3h of lens wear.

RESULTS

Irregular corneas showed higher OC-SAG values than regular corneas in all the chords analyzed, with statistical significant differences in the temporal region. Regarding tangent angles, regular corneas showed lower values (flatter surface), with statistical significant differences at 8 and 8.50mm on the nasal and 8.50mm on the temporal region. Some changes were seen in sclero-conjuctival shape after short-term ScCL wear. There was an augment in OC-SAG after 3h of scleral lens wear and a reduction on tangent angles, namely on the nasal region at 7.5mm and 8.00mm chord lengths, which is coincidental with the landing zone of ScCL.

CONCLUSIONS

ESP shows mild differences in scleral shape between eyes with regular and irregular corneas. ESP might be valuable in quantifying the mechanical impact of the ScCL on the anterior eye surface.

Contact Lens Materials: A Materials Science Perspective

More is demanded from ophthalmic treatments using contact lenses, which are currently used by over 125 million people around the world. Improving the material of contact lenses (CLs) is a now rapidly evolving discipline. These materials are developing alongside the advances made in related biomaterials for applications such as drug delivery. Contact lens materials are typically based on polymer- or silicone-hydrogel, with additional manufacturing technologies employed to produce the final lens. These processes are simply not enough to meet the increasing demands from CLs and the ever-increasing number of contact lens (CL) users. This review provides an advanced perspective on contact lens materials, with an emphasis on materials science employed in developing new CLs. The future trends for CL materials are to graft, incapsulate, or modify the classic CL material structure to provide new or improved functionality. In this paper, we discuss some of the fundamental material properties, present an outlook from related emerging biomaterials, and provide viewpoints of precision manufacturing in CL development.

Optical coherence tomography and scleral contact lenses: clinical and research applications

Anterior segment optical coherence tomography (OCT) provides a wealth of opportunities for modern contact lens practice. OCT imaging has numerous clinical and research applications related to the tear film, cornea, conjunctiva, sclera and ocular adnexae, in addition to soft, rigid, and hybrid contact lenses. This review summarises the potential use of OCT imaging in modern scleral contact lens practice including initial lens selection, assessing the scleral contact lens fit with respect to the cornea and sclera, and accurately quantifying the ocular response to lens wear. Recent advances in the understanding of anterior segment metrics including scleral thickness, curvature, toricity, and the anatomy of the corneoscleral limbal junction are also discussed.

Intra-ocular pressure variation associated with the wear of scleral lenses of different diameters

PURPOSE

To evaluate the variation of intra-ocular pressure during scleral lens wear, and the influence of the lens diameter on the results.

METHODS

This is a prospective, randomized study performed on Caucasian subjects (16 F; 5 M), aged 24.7 + 4.1 y.o. A diurnal variation pattern (IOPg) was established, then, transpalpebral IOP (IOPt) was taken before and during SL wear. One eye, randomly fitted with a 15.8 diameter SL (L1), was compared to the fellow eye, fitted with an 18 mm SL of the same design, thickness and material (L2). Anterior segment tomography was taken pre-and after lens removal.

RESULTS

Baseline IOPg (L1:15.2 + 3.1 mm HG; L2: 15.1 +/- 2.8 mm) did not reveal significant diurnal variations. Wearing L1, IOPt rose from 10.1 + 1.9 mm HG to 14.4 + 5.5 mm HG after 4.5 + 0.3 hrs, while with L2, it rose from 9.2 + 2.1 mm HG to 14.4 + 4.8 mm Hg. This difference is statistically significant based on time but not on lenses. Anterior segment parameters did not vary except for the anterior chamber volume (L1: -1.53 + 7.61 mm³; L2: -3.47 + 6.4 mm³), and for the corneal thickness (+2.1% with L1 and L2).

CONCLUSION

These results suggest that, as evaluated with a non-standard transpalpebral methodology, IOP during scleral lens wear may be increased in average by 5 mm Hg, regardless of the lens diameter. More work is needed to confirm if practitioners should be warned when using SL on populations at risk for glaucoma.

Posterior cornea and thickness changes after scleral lens wear in keratoconus patients

PURPOSE

To evaluate the changes in the corneal thickness, anterior chamber depth and posterior corneal curvature and aberrations after scleral lens wear in keratoconus patients with and without intrastromal corneal ring segments (ICRS).

METHODS

Twenty-six keratoconus subjects (36.95 ± 8.95 years) were evaluated after 8 h of scleral lens wear. The subjects were divided into two groups: those with ICRS (ICRS group) and without ICRS (KC group). The study variables evaluated before and immediately after scleral lens wear included corneal thickness evaluated in different quadrants, posterior corneal curvature at 2, 4, 6 and 8 mm of corneal diameter, posterior corneal aberrations for 4, 6 and 8 mm of pupil size and anterior chamber depth.

RESULTS

There was a statistically significant corneal thinning (p < 0.05) in the inferior region of the KC group and in the superior region of the ICRS group. No change (p > 0.05) in the anterior chamber depth was found. The KC group showed a steepening (p < 0.05) in the temporal quadrant and a flattening that mainly affected to the superior-nasal quadrant. The ICRS group showed a steepening (p < 0.05) that mainly affected to the superior-nasal quadrant. Regarding posterior corneal aberrations, only changes (p < 0.05) in Z4 for 8 mm and Z8 for 4 mm were found in the KC group.

CONCLUSIONS

Short-term scleral lens wear showed a thinning of the cornea and changes in the posterior corneal curvature affects different regions in keratoconus patients with and without ICRS.

The time course and nature of corneal oedema during sealed miniscleral contact lens wear

PURPOSE

To examine the magnitude and time course of central epithelial, stromal and total corneal thickness changes during sealed miniscleral contact lens wear and the influence of initial central corneal clearance upon these thickness changes.

METHODS

High-resolution OCT images were captured over an 8 h period of miniscleral contact lens wear (using a rotationally symmetric 16.5 mm diameter lens) in 15 young, healthy participants with normal corneae. Corneal thickness data were derived from OCT images using semi-automated image processing techniques over the central 4 mm.

RESULTS

Changes in stromal and total corneal thickness followed a similar pattern throughout lens wear with oedema first detected 15 min after lens insertion (0.47 ± 0.09% increase in stromal and total corneal thickness, both p < 0.01) which peaked after 90 min of lens wear (1.36 ± 0.24% increase in stromal and 1.18 ± 0.20% increase in total corneal thickness, both p < 0.01) and gradually decreased thereafter. Epithelial thickness increased slightly during the first 30 min of lens wear (0.56 ± 0.30% increase, p > 0.05), then rapidly decreased reaching a minimum thickness 480 min after lens insertion (2.38 ± 0.70% decrease, p < 0.05). The maximum total corneal oedema, maximum stromal oedema, and maximum epithelial thinning were not associated with the initial central corneal clearance or the extent of lens settling over the 8 h period (all p > 0.05). Greater initial central corneal clearance resulted in less oxygen concentration reaching the cornea (∼2% less) based on previously published data, which manifested as ∼0.5% more central corneal oedema.

CONCLUSIONS

Scleral lens induced corneal oedema is stromal in nature. On average, central stromal and total corneal thickness increased rapidly following lens insertion and peaked after 90 min, while central epithelial thickness gradually decreased throughout lens wear consistent with natural diurnal variation. A greater initial central corneal clearance resulted in reduced oxygen delivery to the cornea, which had minimal short-term impact upon healthy eyes, however, minimising central corneal clearance may be important in eyes with reduced endothelial cell function to minimise hypoxic stress.