Development of broad-acting clays for the tight adsorption of benzo[a]pyrene and aldicarb

Using L. minor and C. elegans to assess the ecotoxicity of real-life contaminated soil samples and their remediation by clay- and carbon-based sorbents

Toxic substances, such as polycyclic aromatic hydrocarbons (PAHs) and heavy metals, can accumulate in soil, posing a risk to human health and the environment. To reduce the risk of exposure, rapid identification and remediation of potentially hazardous soils is necessary. Adsorption of contaminants by activated carbons and clay materials is commonly utilized to decrease the bioavailability of chemicals in soil and environmental toxicity in vitro, and this study aims to determine their efficacy in real-life soil samples. Two ecotoxicological models (Lemna minor and Caenorhabditis elegans) were used to test residential soil samples, known to contain an average of 5.3, 262, and 9.6 ppm of PAHs, lead, and mercury, for potential toxicity. Toxicity testing of these soils indicated that 86% and 58% of soils caused ≤50% inhibition of growth and survival of L. minor and C. elegans, respectively. Importantly, 3 soil samples caused ≥90% inhibition of growth in both models, and the toxicity was positively correlated with levels of heavy metals. These toxic soil samples were prioritized for remediation using activated carbon and SM-Tyrosine sorbents, which have been shown to immobilize PAHs and heavy metals, respectively. The inclusion of low levels of SM-Tyrosine protected the growth and survival of L. minor and C. elegans by 83% and 78%, respectively from the polluted soil samples while activated carbon offered no significant protection. These results also indicated that heavy metals were the driver of toxicity in the samples. Results from this study demonstrate that adsorption technologies are effective strategies for remediating complex, real-life soil samples contaminated with hazardous pollutants and protecting natural soil and groundwater resources and habitats. The results highlight the applicability of these ecotoxicological models as rapid screening tools for monitoring soil quality and verifying the efficacy of remediation practices.

Simultaneous removal of phenanthrene and Pb using novel PPG-CNTs-nZVI beads

PPG-CNTs-nZVI bead was synthesized by polyvinyl alcohol, pumice, carbon nanotube, and guar gum-nanoscale zero-valent iron to be applied on simultaneously removal of polycyclic aromatic hydrocarbons (PAHs; phenanthrene) and heavy metals (Pb2+) via adsorption. The individual and simultaneous removal efficiency of phenanthrene and Pb2+ using the PPG-CNTs-nZVI beads was evaluated with a range of initial concentrations of these two pollutants. The kinetics and isotherms of phenanthrene and Pb2+ adsorption by the PPG-CNTs-nZVI beads were also determined. The PPG-CNTs-nZVI beads show reasonably high phenanthrene adsorption capacities (up to 0.16 mg/g), and they absorbed 85% of the phenanthrene (initial concentration 0.5 mg/L) in 30 min. High Pb2+ adsorption capabilities were also demonstrated by the PPG-CNTs-nZVI beads (up to 11.6 mg/g). The adsorption fits the Langmuir model better than the Freundlich model. The adsorption still remained stable with various ionic strength circumstances and a wide pH range (2-5). Additionally, the co-adsorption of phenanthrene and Pb2+ by the PPG-CNTs-nZVI beads resulted in synergistic effects. Particularly, phenanthrene-Pb2+ complex formation via π-cation interactions demonstrated a greater affinity than phenanthrene or Pb2+ alone. The present findings suggest that PPG-CNTs-nZVI beads may be effective sorbents for the simultaneous removal of PAHs and heavy metals from contaminated waters.

In vitro and in vivo remediation of per- and polyfluoroalkyl substances by processed and amended clays and activated carbon in soil

Remediation methods for soil contaminated with poly- and perfluoroalkyl substances (PFAS) are needed to prevent their leaching into drinking water sources and to protect living organisms in the surrounding environment. In this study, the efficacy of processed and amended clays and carbons as soil amendments to sequester PFAS and prevent leaching was assessed using PFAS-contaminated soil and validated using sensitive ecotoxicological bioassays. Four different soil matrices including quartz sand, clay loam soil, garden soil, and compost were spiked with 4 PFAS congeners (PFOA, PFOS, GenX, and PFBS) at 0.01-0.2 μg/mL and subjected to a 3-step extraction method to quantify the leachability of PFAS from each matrix. The multistep extraction method showed that PFAS leaching from soil was aligned with the total carbon content in soil, and the recovery was dependent on concentration of the PFAS. To prevent the leaching of PFAS, several sorbents including activated carbon (AC), calcium montmorillonite (CM), acid processed montmorillonite (APM), and organoclays modified with carnitine, choline, and chlorophyll were added to the four soil matrices at 0.5-4 % w/w, and PFAS was extracted using the LEAF method. Total PFAS bioavailability was reduced by 58-97 % by all sorbents in a dose-dependent manner, with AC being the most efficient sorbent with a reduction of 73-97 %. The water leachates and soil were tested for toxicity using an aquatic plant (Lemna minor) and a soil nematode (Caenorhabditis elegans), respectively, to validate the reduction in PFAS bioavailability. Growth parameters in both ecotoxicological models showed a dose-dependent reduction in toxicity with value-added growth promotion from the organoclays due to added nutrients. The kinetic studies at varying time intervals and varying pHs simulating acidic rain, fresh water, and brackish water suggested a stable sorption of PFAS on all sorbents that fit the pseudo-second-order for up to 21 days. Contaminated soil with higher than 0.1 μg/mL PFAS may require reapplication of soil amendments every 21 days. Overall, AC showed the highest sorption percentage of total PFAS from in vitro studies, while organoclays delivered higher protection in ecotoxicological models (in vivo). This study suggests that in situ immobilization with soil amendments can reduce PFAS leachates and their bioavailability to surrounding organisms. A combination of sorbents may facilitate the most effective remediation of complex soil matrices containing mixtures of PFAS and prevent leaching and uptake into plants.

Microbiology and Biochemistry of Pesticides Biodegradation

Pesticides are chemicals used in agriculture, forestry, and, to some extent, public health. As effective as they can be, due to the limited biodegradability and toxicity of some of them, they can also have negative environmental and health impacts. Pesticide biodegradation is important because it can help mitigate the negative effects of pesticides. Many types of microorganisms, including bacteria, fungi, and algae, can degrade pesticides; microorganisms are able to bioremediate pesticides using diverse metabolic pathways where enzymatic degradation plays a crucial role in achieving chemical transformation of the pesticides. The growing concern about the environmental and health impacts of pesticides is pushing the industry of these products to develop more sustainable alternatives, such as high biodegradable chemicals. The degradative properties of microorganisms could be fully exploited using the advances in genetic engineering and biotechnology, paving the way for more effective bioremediation strategies, new technologies, and novel applications. The purpose of the current review is to discuss the microorganisms that have demonstrated their capacity to degrade pesticides and those categorized by the World Health Organization as important for the impact they may have on human health. A comprehensive list of microorganisms is presented, and some metabolic pathways and enzymes for pesticide degradation and the genetics behind this process are discussed. Due to the high number of microorganisms known to be capable of degrading pesticides and the low number of metabolic pathways that are fully described for this purpose, more research must be conducted in this field, and more enzymes and genes are yet to be discovered with the possibility of finding more efficient metabolic pathways for pesticide biodegradation.

Development and characterization of chlorophyll-amended montmorillonite clays for the adsorption and detoxification of benzene

After disasters, such as forest fires and oil spills, high levels of benzene (> 1 ppm) can be detected in the water, soil, and air surrounding the disaster site, which poses a significant health risk to human, animal, and plant populations in the area. While remediation methods with activated carbons have been employed, these strategies are limited in their effectiveness due to benzene's inherent stability and limited retention to most surfaces. To address this problem, calcium and sodium montmorillonite clays were amended with a mixture of chlorophyll (a) and (b); their binding profile and ability to detoxify benzene were characterized using in vitro, in silico, and well-established ecotoxicological (ecotox) bioassay methods. The results of in vitro isothermal analyses indicated that chlorophyll-amended clays showed an improved binding profile in terms of an increased binding affinity (Kf = 668 vs 67), increased binding percentage (52% vs 11%), and decreased rates of desorption (28% vs 100%), compared to the parent clay. In silico simulation studies elucidated the adsorption mechanism and validated that the addition of the chlorophyll to the clays increased the adsorption of benzene through Van der Waals forces (i.e., aromatic π-π stacking and alkyl-π interactions). The sorbents were also assessed for their safety and ability to protect sensitive ecotox organisms (Lemna minor and Caenorhabditis elegans) from the toxicity of benzene. The inclusion of chlorophyll-amended clays in the culture medium significantly reduced benzene toxicity to both organisms, protecting C. elegans by 98-100% from benzene-induced mortality and enhancing the growth rates of L. minor. Isothermal analyses, in silico modeling, and independent bioassays all validated our proof of concept that benzene can be sequestered, tightly bound, and stabilized by chlorophyll-amended montmorillonite clays. These novel sorbents can be utilized during disasters and emergencies to decrease unintentional exposures from contaminated water, soil, and air.

Montmorillonite clay-based sorbents decrease the bioavailability of per- and polyfluoroalkyl substances (PFAS) from soil and their translocation to plants

Consumption of food and water contaminated with per- and polyfluoroalkyl substances (PFAS) presents a significant risk for human exposure. There is limited data on high affinity sorbents that can be used to reduce the bioavailability of PFAS from soil and translocation to plants and garden produce. To address this need, montmorillonite clay was amended with the nutrients carnitine and choline to increase the hydrophobicity of the sorbent and the interlayer spacing. In this study, the binding of PFOA (perfluorooctanoic acid) and PFOS (perfluorooctanesulfonic acid) to parent and amended clays was characterized. Isothermal analyses were conducted at pH 7 and ambient temperature to simulate environmentally-relevant conditions. The data for all tested sorbents fit the Langmuir model indicating saturable binding sites with high capacities and affinities under neutral conditions. Amended montmorillonite clays had increased capacities for PFOA and PFOS (0.51-0.71 mol kg^-1) compared to the parent clay (0.37-0.49 mol kg^-1). Molecular dynamics (MD) simulations suggested that hydrophobic and electrostatic interactions at the terminal fluorinated carbon chains of PFAS compounds were major modes of surface interaction. The safety and efficacy of the clays were confirmed in a living organism (Lemna minor), where clays (at 0.1% inclusion) allowed for increased growth compared to PFOA and PFOS controls (p ≤ 0.01). Importantly, soil studies showed that 2% sorbent inclusion could significantly reduce PFAS bioavailability from soil (up to 74%). Studies in plants demonstrated that inclusion of 2% sorbent significantly reduced PFAS residues in cucumber plants (p ≤ 0.05). These results suggest that nutrient-amended clays could be included in soil to decrease PFAS bioavailability and translocation of PFAS to plants.

Sorption of benzo[a]pyrene by Chernozem and carbonaceous sorbents: comparison of kinetics and interaction mechanisms

Benzo[a]pyrene (BaP) is a polycyclic aromatic hydrocarbon, highly persistent and toxic and a widespread environmental pollutant. Although various technologies have been developed to remove BaP from the environment, its sorption through solid matrixes has received increasing attention due to cost-effectiveness. The present research compares the adsorption capacity of Haplic Chernozem, granular activated carbon and biochar in relation to BaP from water solution. Laboratory experiments with different initial BaP concentrations in the liquid phase and different ratios of the solid and liquid phases show that Freundlich model describes well the adsorption isotherms of BaP by the soil and both sorbents. Moreover, the BaP isotherm sorption by the Haplic Chernozem is better illustrated by the Freundlich model than the Langmuir equation. The results reveal that the sorption capacity of the carbonaceous adsorbents at a ratio 1:20 (solid to liquid phases) is orders of magnitude higher (13 368 ng mL^-1 of activated carbon and 3 578 ng mL^-1 of biochar) compared to the soil (57.8 ng mL^-1). At the ratio of 0.5:20, the adsorption capacity of the carbonaceous sorbents was 17-45 times higher than that of the soil. This is due to the higher pore volume and specific surface area of the carbonaceous sorbents than soil particles, assessed through scanning electron microscopy. The sorption kinetic of BaP by Chernozem was compared with the adsorption kinetics by the carbonaceous sorbents. Results indicate that the adsorption dynamic involves two steps. The first one is associated with a fast BaP adsorption on the large available surface and inside macro- and meso-pores of the sorbent particles of the granular activated carbon and biochar. Then, the adsorption is followed by a slower process of BaP penetration into the microporous space and/or redistribution into a hydrophobic fraction. The effectiveness of the sorption process depends on both the sorbent properties and the solvent competition. Overall, the granular activated carbon and biochar are highly effective adsorbents for BaP, whereas the Haplic Chernozem has a rather limited capacity to remove BaP from contaminated solutions.

Application of Edible Montmorillonite Clays for the Adsorption and Detoxification of Microcystin

Exposure to microcystins (MCs) in humans and animals commonly occurs through the consumption of drinking water and food contaminated with cyanobacteria. Although studies have focused on developing water filtration treatments for MCs using activated carbon, dietary sorbents to reduce the bioavailability of MCs from the stomach and intestines have not been reported. To address this need, edible calcium and sodium montmorillonite clays were characterized for their ability to bind MC containing leucine and arginine (MC-LR) under conditions simulating the gastrointestinal tract and compared with a medical-grade activated carbon. Results of in vitro adsorption isotherms and thermodynamics showed that binding plots for MC-LR on montmorillonites fit the Langmuir model with high binding capacity, affinity, Gibbs free energy, and enthalpy. The in silico results from molecular modeling predicted that the major binding mechanisms involved electrostatics and hydrogen bonds, and that interlayers were important binding sites. The safety and detoxification efficacy of the sorbents against MC-LR were validated in a battery of living organisms, including Hydra vulgaris, Lemna minor, and Caenorhabditis elegans. The inclusion of 0.05% and 0.1% montmorillonite clays in hydra media significantly reduced MC-LR toxicity and protected hydra by 60-80%, whereas only slight protection was shown with the heat-collapsed clay. In the Lemna minor assay, montmorillonites significantly enhanced the growth of lemna, as supported by the increase in frond number, surface area, chlorophyll content, and growth rate, as well as the decrease in inhibition rate. Similar results were shown in the C. elegans assay, where montmorillonite clays reduced MC-LR effects on body length and brood size. All 3 bioassays confirmed dose-dependent protection from MC-LR, validated the in vitro and in silico findings, and suggested that edible montmorillonites are safe and efficacious binders for MC-LR. Moreover, their inclusion in diets during algal blooming seasons could protect vulnerable populations of humans and animals.

Combining Experimental Isotherms, Minimalistic Simulations, and a Model to Understand and Predict Chemical Adsorption onto Montmorillonite Clays

An attractive approach to minimize human and animal exposures to toxic environmental contaminants is the use of safe and effective sorbent materials to sequester them. Montmorillonite clays have been shown to tightly bind diverse toxic chemicals. Due to their promise as sorbents to mitigate chemical exposures, it is important to understand their function and rapidly screen and predict optimal clay-chemical combinations for further testing. We derived adsorption free-energy values for a structurally and physicochemically diverse set of toxic chemicals using experimental adsorption isotherms performed in the current and previous studies. We studied the diverse set of chemicals using minimalistic MD simulations and showed that their interaction energies with calcium montmorillonite clays calculated using simulation snapshots in combination with their net charge and their corresponding solvent's dielectric constant can be used as inputs to a minimalistic model to predict adsorption free energies in agreement with experiments. Additionally, experiments and computations were used to reveal structural and physicochemical properties associated with chemicals that can be adsorbed to calcium montmorillonite clay. These properties include positively charged groups, phosphine groups, halide-rich moieties, hydrogen bond donor/acceptors, and large, rigid structures. The combined experimental and computational approaches used in this study highlight the importance and potential applicability of analogous methods to study and design novel advanced sorbent systems in the future, broadening their applicability for environmental contaminants.

Testing the efficacy of broad-acting sorbents for environmental mixtures using isothermal analysis, mammalian cells, and H. vulgaris

The hazards associated with frequent exposure to polycyclic aromatic hydrocarbons (PAHs), pesticides, Aroclors, plasticizers, and mycotoxins are well established. Adsorption strategies have been proposed for the remediation of soil and water, although few have focused on the mitigation of mixtures. This study tested a hypothesis that broad-acting sorbents can be developed for diverse chemical mixtures. Adsorption of common and hazardous chemicals was characterized using isothermal analysis from Langmuir and Freundlich equations. The most effective sorbents included medical-grade activated carbon (AC), parent montmorillonite clay, acid-processed montmorillonite (APM), and nutrient-amended montmorillonite clays. Next, we tested the ability of broad-acting sorbents to prevent cytotoxicity of class-specific mixtures using 3 mammalian in vitro models (HLF, ESD3, and 3T3 cell lines) and the hydra assay. AC showed the highest efficacy for mitigating pesticides, plasticizers, PAHs, and mycotoxins. Clays, such as APM, were effective against pesticides, Aroclors, and mycotoxins, while amended clays were most effective against plasticizers. Finally, a sorbent mixture was shown to be broadly active. These results are supported by the high correlation coefficients for the Langmuir model with high capacity, affinity, and free energy, as well as the significant protection of cells and hydra (p < 0.05). The protection percentages in 3T3 cells and hydra showed the highest correlation as suggested by both Pearson and Spearman with r = 0.84 and rho = 0.73, respectively (p < 0.0001). Collectively, these studies showed that broad-acting sorbents may be effective in preventing toxic effects of chemical mixtures and provided information on the most effective sorbents based on adsorption isotherms, and in vitro and aquatic organism test methods.

Tight sorption of arsenic, cadmium, mercury, and lead by edible activated carbon and acid-processed montmorillonite clay

Heavy metal exposure in humans and animals commonly occurs through the consumption of metal-contaminated drinking water and food. Although many studies have focused on the remediation of metals by purification of water using sorbents, limited therapeutic sorbent strategies have been developed to minimize human and animal exposures to contaminated water and food. To address this need, a medical grade activated carbon (MAC) and an acid processed montmorillonite clay (APM) were characterized for their ability to bind heavy metals and mixtures. Results of screening and adsorption/desorption isotherms showed that binding plots for arsenic, cadmium, and mercury sorption on surfaces of MAC (and lead on APM) fit the Langmuir model. The highest binding percentage, capacity, and affinity were shown in a simulated stomach model, and the lowest percentage desorption (< 18%) was shown in a simulated intestine model. The safety and protective ability of MAC and APM were confirmed in a living organism (Hydra vulgaris) where 0.1% MAC significantly protected the hydra against As, Cd, Hg, and a mixture of metals by 30-70%. In other studies, APM showed significant reduction (75%) of Pd toxicity, compared with MAC and heat-collapsed APM, suggesting that the interlayer of APM was important for Pb sorption. This is the first report showing that edible sorbents can bind mixtures of heavy metals in a simulated gastrointestinal tract and prevent their toxicity in a living organism. Graphical abstract.

Enhanced adsorption of per- and polyfluoroalkyl substances (PFAS) by edible, nutrient-amended montmorillonite clays

Humans and animals are frequently exposed to PFAS (per- and polyfluoroalkyl substances) through drinking water and food; however, no therapeutic sorbent strategies have been developed to mitigate this problem. Montmorillonites amended with the common nutrients, carnitine and choline, were characterized for their ability to bind 4 representative PFAS (PFOA, PFOS, GenX, and PFBS). Adsorption/desorption isothermal analysis showed that PFOA, PFOS (and a mixture of the two) fit the Langmuir model with high binding capacity, affinity and enthalpy at conditions simulating the stomach. A low percentage of desorption occurred at conditions simulating the intestine. The results suggested that hydrophobic and electrostatic interactions, and hydrogen bonding were responsible for sequestering PFAS into clay interlayers. Molecular dynamics (MD) simulations suggested the key mode of interaction of PFAS was through fluorinated carbon chains, and confirmed that PFOA and PFOS had enhanced binding to amended clays compared to GenX and PFBS. The safety and efficacy of amended montmorillonite clays were confirmed in Hydra vulgaris, where a mixture of amended sorbents delivered the highest protection against a PFAS mixture. These important results suggest that the inclusion of edible, nutrient-amended clays with optimal affinity, capacity, and enthalpy can be used to decrease the bioavailability of PFAS from contaminated drinking water and diets.

Insights into the interactions of bisphenol and phthalate compounds with unamended and carnitine-amended montmorillonite clays

Montmorillonite clays could be promising sorbents to mitigate toxic compound exposures. Bisphenols A (BPA) and S (BPS) as well as phthalates, dibutyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP), are ubiquitous environmental contaminants linked to adverse health effects. Here, we combined computational and experimental methods to investigate the ability of montmorillonite clays to sorb these compounds. Molecular dynamics simulations predicted that parent, unamended, clay has higher binding propensity for BPA and BPS than for DBP and DEHP; carnitine-amended clay improved BPA and BPS binding, through carnitine simultaneously anchoring to the clay through its quaternary ammonium cation and forming hydrogen bonds with BPA and BPS. Experimental isothermal analysis confirmed that carnitine-amended clay has enhanced BPA binding capacity, affinity and enthalpy. Our studies demonstrate how computational and experimental methods, combined, can characterize clay binding and sorption of toxic compounds, paving the way for future investigation of clays to reduce BPA and BPS exposure.

Adsorption of Polycyclic Aromatic Hydrocarbons from aqueous solution by Organic Montmorillonite Sodium Alginate Nanocomposites

The adsorption method is generally considered a promising technique to remove inorganic and organic contaminants in an economically and environmentally friendly superior manner. In this study, organic montmorillonite sodium alginate composites were prepared, in which, montmorillonite and cationic surfactant (cetyltrimethylammonium bromide, CTAB) in different added amounts were coagulated with sodium alginate using CaCl₂ as the crosslinking agent. The morphological properties of the composites were characterized thoroughly and employed in three typical target pollutants of polycyclic aromatic hydrocarbons (PAHs) (acenaphthene, fluorene, and phenanthrene) by batch adsorption experiments from aqueous solution. The composites provide an efficient alternative for PAHs removals. The composites could be stably separated and regenerated with methyl alcohol. Furthermore, the adsorption kinetic and isotherm data were well described by the Elovich kinetic and the Freundlich isotherm model, respectively. According to these, the adsorption process occurred via multilayer adsorption on the composite's energetically heterogeneous surface. Moreover, pore diffusion and hydrophobicity played a dominant role in the adsorption mechanism. Overall, our study offers a developed adsorbent that has the advantage of being recyclable, low cost, biodegradable and biocompatible for effectively removing PAHs from aqueous solution.

A high capacity bentonite clay for the sorption of aflatoxins

Previously a calcium bentonite clay (CB) has been shown to tightly bind aflatoxins in vitro, significantly reduce mortality and morbidity in animals, and decrease molecular biomarkers of aflatoxin exposure in humans and animals. Extensive studies have shown that CB is safe for human and animal consumption. In further work, we have investigated a highly active sodium bentonite (SB) clay (SB-E) with enhanced aflatoxin sorption efficacy compared to CB and other clays. Computational models and isothermal analyses were used to characterise toxin/clay surface interactions, predict mechanisms of toxin sorption, and gain insight into: 1) surface capacities and affinities, and 2) thermodynamics and sites of toxin/surface interactions. We have also used a toxin-sensitive living organism (Hydra vulgaris) to confirm the safety and predict the efficacy of SB-E against aflatoxin toxicity. Compared to CB, SB-E had a higher capacity for aflatoxin B1 (AfB1) at pH 2 and 6.5. Results from this work suggest that high capacity clays such as SB-E can be used as effective aflatoxin enterosorbents to decrease short-term exposures in humans and animals when included in food and/or water during extended droughts and outbreaks of aflatoxicosis.

Potential Applications of Clay-Based Therapy for the Reduction of Pesticide Exposures in Humans and Animals

The risk of pesticide exposure in humans and animals may be magnified following natural and man-made disasters such as hurricanes and floods that can result in mobilization and redistribution of contaminated sediments. To develop broad-acting sorbents for mixtures of diverse toxins, we have processed calcium and sodium montmorillonite clays with high concentrations of sulfuric acid. These acid-processed montmorillonite clays (APMs) have shown limited hydration and swelling in water, higher surface areas, and lower trace metal levels than the parent clays, prior to processing. Isothermal analyses have indicated that newly developed APMs are highly active sorbents, with significantly increased binding capacities for a wide range of pesticides, including pentachlorophenol (PCP), 2,4,6-trichlorophenol (2,4,6-TCP), lindane, diazinon, linuron, trifluralin and paraquat. The safety and protective effects of APMs, against pesticide design mixtures, were confirmed in a living organism (Hydra vulgaris). Further work is planned to confirm the safety of the APMs in long-term rodent studies. This is the first report of a sorbent material (other than carbon) with high binding efficacy for mixtures of these pesticides. Based on our results, APMs (and similar clays), may be able to decrease human and animal pesticide exposures during disasters and emergencies.

Strong adsorption of Polychlorinated Biphenyls by processed montmorillonite clays: Potential applications as toxin enterosorbents during disasters and floods

Polychlorinated biphenyls (PCBs) have been detected as prevalent environmental contaminants in water, food and biota. Previous studies in vitro have shown that a variety of sorbent materials, including carbon, can sorb PCBs; however, PCB sorbents that can be added to food or drinking water to decrease toxin bioavailability in humans and animals have not been reported. To address this problem, we have developed broad-acting and highly effective sorbents for PCBs using montmorillonite clays reported to be safe for consumption in animals and humans. In this study, calcium montmorillonite clays were acid processed (APMs) and the interactions of six PCB congeners (PCB 77, 126, 153, 157, 154 and 155) on the surfaces of APMs were characterized. Computational models and isothermal analyses were used to derive surface capacities and affinities, delineate mechanisms and predict the thermodynamics of sorption. To confirm the safety and predict the efficacy of APMs against individual PCBs and common mixtures (Aroclors 1254 and 1260), we have also used a living organism (Hydra vulgaris) that is sensitive to toxins. APMs significantly protected hydra against the toxicity of PCBs and Aroclors. This finding was supported by studies showing tight binding; high capacity, affinity, and enthalpy; and a low therapeutic dose.

Montmorillonites Can Tightly Bind Glyphosate and Paraquat Reducing Toxin Exposures and Toxicity

Among the numerous contaminants of soil, glyphosate and paraquat are two of the most widely used herbicides that are commonly detected in the environment. Soil and sediment contaminated with glyphosate, paraquat, and other environmental toxins can be mobilized and redistributed to lawns, vegetable gardens, parks, and water supplies in vulnerable communities at the site of disasters such as hurricanes and flooding. Glyphosate and paraquat bind strongly to soils containing clays, making their bioavailability (bioaccessibility) from these types of soil very low. Because of their affinity for clay-based soils, it is possible that montmorillonite clays could be administered as a therapeutic agent in the diet of animals and humans to decrease short-term exposure and toxicity. In this study, we investigated the sorption mechanisms of glyphosate and paraquat onto active surfaces of calcium montmorillonite (CM) and sodium montmorillonite (SM) clays and derived binding parameters, including capacity, affinity, and enthalpy. Additionally, we used these parameters to predict the reduction in bioavailability under different pH and temperature conditions and to estimate the theoretical dose of clay that could protect against severe paraquat toxicity and lethality. Computational modeling and simulation studies depicted toxin sorption mechanisms at different pH values. Additionally, a toxin-sensitive living organism (Hydra vulgaris) was used to confirm the safety of the clay and its ability to protect against toxicity from glyphosate and paraquat. The high efficacy of CM and SM shown in this study supports the natural binding activity of glyphosate and paraquat to clay-based soils. Following disasters and medical emergencies, montmorillonite clays could be administered by capsules and tablets, or added to food and flavored water, to reduce toxin bioavailability and human and animal exposures.