Development of a prototype blood fractionation cartridge for plasma analysis by paper spray mass spectrometry

Pressure sensitive adhesives and paper spray-mass spectrometry for the collection and analysis of fentanyl-related compounds from shipping materials

The rise of fentanyl and fentanyl analogs in the drug supply pose serious threats to public health. Much of these compounds enter the United States through shipping routes. Here we provide a method for fentanyl screening and analysis that utilizes pressure-sensitive adhesive (PSA) lined paper to recover drug residues from parcel-related surfaces. The paper used is commercially available repositionable notes (also called post-it or sticky notes). From this paper, mass spectra were obtained by paper spray-mass spectrometry (PS-MS), where PSA paper served as both a sampling and analysis substrate. Seven fentanyl-related compounds were analyzed: fentanyl, 4-anilino-N-phenethylpiperidine (4-ANPP), N,1-diphenethyl-N-phenylpiperidin-4-amine (phenethyl-4-ANPP), valerylfentanyl, 4-fluoroisobutyrylfentanyl (4-FIBF), carfentanil, and p-fluorofentanyl. These compounds were recovered by PSA paper and identified by PS-MS from packaging tape and plastic at 50 ng and from cardboard and shipping labels at 100 ng. The impact of cutting agents on PS-MS analysis of fentanyl analogs was explored. No trends of analyte suppression were found at high concentrations of the cutting agents caffeine, diphenhydramine, and lidocaine when recovered from surfaces. A cartridge that required no precise cutting of PSA paper prior to sampling or analysis was evaluated for use in PS-MS for fentanyl screening. Recovery and detection of fentanyl from plastic sheeting was demonstrated with this cut-free cartridge. The cut-free cartridge showed somewhat less consistency and lower analyte signal than the standard cartridge, but performance was suitable for potential screening applications. In combining PSA surface sampling with PS-MS for drug screening, both sampling and detection of fentanyl-related compounds is simple, rapid, and low-cost.

Clinical Chemistry for Developing Countries: Mass Spectrometry

Early disease diagnosis is necessary to enable timely interventions. Implementation of this vital task in the developing world is challenging owing to limited resources. Diagnostic approaches developed for resource-limited settings have often involved colorimetric tests (based on immunoassays) due to their low cost. Unfortunately, the performance/sensitivity of such simplistic tests are often limited and significantly hinder opportunities for early disease detection. A new criterion for selecting diagnostic tests in low- and middle-income countries is proposed here that is based on performance-to-cost ratio. For example, modern mass spectrometry (MS) now involves analysis of the native sample in the open laboratory environment, enabling applications in many fields, including clinical research, forensic science, environmental analysis, and agriculture. In this critical review, we summarize recent developments in chemistry that enable MS to be applied effectively in developing countries. In particular, we argue that closed automated analytical systems may not offer the analytical flexibility needed in resource-limited settings. Alternative strategies proposed here have potential to be widely accepted in low- and middle-income countries through the utilization of the open-source ambient MS platform that enables microsampling techniques such as dried blood spot to be coupled with miniature mass spectrometers in a centralized analytical platform. Consequently, costs associated with sample handling and maintenance can be reduced by >50% of the total ownership cost, permitting analytical measurements to be operated at high performance-to-cost ratios in the developing world.

Enhancing Nonfouling and Sensitivity of Surface-Enhanced Raman Scattering Substrates for Potent Drug Analysis in Blood Plasma via Fabrication of a Flexible Plasmonic Patch

Surface-enhanced Raman scattering (SERS) is an ultrasensitive analytical technique, which is capable of providing high specificity; thus, it can be used for toxicological drug assay (detection and quantification). However, SERS-based drug analysis directly in human biofluids requires mitigation of fouling and nonspecificity effects that commonly appeared from unwanted adsorption of endogenous biomolecules present in biofluids (e.g., blood plasma and serum) onto the SERS substrate. Here, we report a bottom-up fabrication strategy to prepare ultrasensitive SERS substrates, first, by functionalizing chemically synthesized gold triangular nanoprisms (Au TNPs) with poly(ethylene glycol)-thiolate in the solid state to avoid protein fouling and second, by generating flexible plasmonic patches to enhance SERS sensitivity via the formation of high-intensity electromagnetic hot spots. Poly(ethylene glycol)-thiolate-functionalized Au TNPs in the form of flexible plasmonic patches show a twofold-improved signal-to-noise ratio in comparison to triethylamine (TEA)-passivated Au TNPs. Furthermore, the plasmonic patch displays a SERS enhancement factor of 4.5 ×10⁷. Utilizing the Langmuir adsorption model, we determine the adsorption constant of drugs for two different surface ligands and observe that the drug molecules display stronger affinity for poly(ethylene glycol) ligands than TEA. Our density functional theory calculations unequivocally support the interaction between drug molecules and poly(ethylene glycol) moieties. Furthermore, the universality of the plasmonic patch for SERS-based drug detection is demonstrated for cocaine, JWH-018, and opioids (fentanyl, despropionyl fentanyl, and heroin) and binary mixture (trace amount of fentanyl in heroin) analyses. We demonstrate the applicability of flexible plasmonic patches for the selective assay of fentanyl at picogram/milliliter concentration levels from drug-of-abuse patients' blood plasma. The fentanyl concentration calculated in the patients' blood plasma from SERS analysis is in excellent agreement with the values determined using the paper spray ionization mass spectrometry technique. We believe that the flexible plasmonic patch fabrication strategy would be widely applicable to any plasmonic nanostructure for SERS-based chemical sensing for clinical toxicology and therapeutic drug monitoring.

Microdroplet Impact-Induced Spray Ionization Mass Spectrometry (MISI MS) for Online Reaction Monitoring and Bacteria Discrimination

Microdroplet impact-induced spray ionization (MISI) is demonstrated involving the impact of microdroplets produced from a paper and their impact on another, leading to the ionization of analytes deposited on the latter. This cascaded process is more advantageous in comparison to standard spray ionization as it performs reactions and ionization simultaneously in the absence of high voltage directly applied on the sample. In MISI, we apply direct current (DC) potential only to the terminal paper, used as the primary ion source. Charge transfer due to microdroplet/ion deposition on the flowing analyte solution on the second surface generates secondary charged microdroplets from it carrying the analytes, which ionize and get detected by a mass spectrometer. In this way, up to three cascaded spray sources could be assembled in series. We show the detection of small molecules and proteins in such ionization events. MISI provides a method to understand chemical reactions by droplet impact. The C-C bond formation reactions catalyzed by palladium and alkali metal ion encapsulation using crown ether were studied as our model reactions. To demonstrate the application of our ion source in a bioanalytical context, we studied the noninvasive in situ discrimination of bacteria samples under ambient conditions.

Development of capillary-paper spray for small-molecule analysis in complex samples

We develop a capillary-paper spray (CPS) ion source which allows for sample separation in the capillary and enables rapid and sensitive paper spray (PS) mass spectrometry (MS) analysis of biofluids. The CPS employs a glass capillary to load liquid analytes, vertically standing at the rear of the PS. To further reduce the matrix effect, a nitrocellulose filter membrane is placed between the glass tube and chromatography paper to absorb proteins and other macromolecules, which is beneficial for the detection of the small molecules. Compared with the normal PS method, the CPS method markedly improves spray stability and prolongs analysis duration, and also generates significantly better signal intensities during the analysis of drugs, thus indicating its potential for clinical use. As a proof of concept, quantitative analysis of drugs (metformin hydrochloride and berberine hydrochloride) in serum is performed.

Microfluidic-based approaches for COVID-19 diagnosis

Novel coronavirus, COVID-19, erupted in Wuhan, China, in 2019 and has now spread to almost all countries in the world. Until the end of November 2020, there were over 50 × 10⁶ people diagnosed with COVID-19 worldwide and it caused at least 1 × 10⁶ deaths. These numbers are still increasing. To control the spread of the pandemic and to choose a suitable treatment plan, a fast, accurate, effective, and ready-to-use diagnostic method has become an important prerequisite. In this Review, we introduce the principles of multiple off-site and on-site detection methods for virus diagnosis, including qPCR-based, ELISA-based, CRISPR-based methods, etc. All of these methods have been successfully implanted on the microfluidic platform for rapid screening. We also summarize currently available diagnostic methods for the detection of SARS, MERS, and COVID-19. Some of them not only can be used to analyze the SARS and MERS but also have the potential for COVID-19 detection after modifications. Finally, we hope that understanding of current microfluidic-based detection approaches can help physicians and researchers to develop advanced, rapid, and appropriate clinical detection techniques that reduce the financial expenditure of the society, accelerate the examination process, increase the accuracy of diagnosis, and eventually suppress the worldwide pandemic.

Emerging trends in paper spray mass spectrometry: Microsampling, storage, direct analysis, and applications

Recent advancements in the sensitivity of chemical instrumentation have led to increased interest in the use of microsamples for translational and biomedical research. Paper substrates are by far the most widely used media for biofluid collection, and mass spectrometry is the preferred method of analysis of the resultant dried blood spot (DBS) samples. Although there have been a variety of review papers published on DBS, there has been no attempt to unify the century old DBS methodology with modern applications utilizing modified paper and paper-based microfluidics for sampling, storage, processing, and analysis. This critical review will discuss how mass spectrometry has expanded the utility of paper substrates from sample collection and storage, to direct complex mixture analysis to on-surface reaction monitoring.

Using Sesame Seed Oil to Preserve and Preconcentrate Cannabinoids for Paper Spray Mass Spectrometry

Cannabinoids present a unique set of analytical challenges. An increasing number of states have voted to decriminalize recreational marijuana use, creating a need for new kinds of rapid testing. At the same time, synthetic compounds with activity similar to THC, termed synthetic cannabinoids, have become more prevalent and pose significant health risks. A rapid method capable of detecting both natural and synthetic cannabinoids would be useful in cases of driving under the influence of drugs, where it might not be obvious whether the suspect consumed marijuana, a synthetic cannabinoid, or both. Paper spray mass spectrometry is an ambient ionization technique which allows for the direct ionization of analyte from a biofluid spot on a piece of paper. Natural cannabinoids like THC, however, are labile and rapidly disappear from dried sample spots, making it difficult to detect them at clinically relevant levels. Presented here is a method to concentrate and preserve THC and synthetic cannabinoids in urine and oral fluid on paper for analysis by paper spray mass spectrometry. Sesame seed oil was investigated both as a means of preserving THC and as part of a technique, termed paper strip extraction, wherein urine or oral fluid is flowed through an oil spot on a strip of paper to preconcentrate cannabinoids. This technique preserved THC in dried biofluid samples for at least 27 days at room temperature; paper spray MS/MS analysis of these preserved dried spots was capable of detecting THC and synthetic cannabinoids at low ng/mL concentrations, making it suitable as a rapid screening technique. The technique was adapted to be used with a commercially available autosampler.

Three-Dimensional Paper-Based Microfluidic Analytical Devices Integrated with a Plasma Separation Membrane for the Detection of Biomarkers in Whole Blood

Paper-based microfluidic analytical devices (μPADs) have recently attracted attention as a point-of-care test kit because of their low cost and nonrequirement for external forces. To directly detect biomarkers in whole blood, however, they need to be assembled with a filter such as a plasma separation membrane (PSM) because the color of the blood cells interferes with the colorimetric assay. However, this assembly process is rather complicated and cumbersome, and the fluid does not uniformly move to the detection zone when the adhesion between the paper and PSM is not perfect. In this study, we report a simple three-dimensional (3D) printing method for fabricating PSM-integrated 3D-μPADs made of plastics without the need for additional assembly. In detail, PSM was coated with parylene C to prevent its dissolution from organic solvent during 3D printing. Then, the coated PSM was superimposed on the paper. Detection zones and a reservoir were printed on the paper and PSM via liquid photopolymerization, using a digital light processing printer. The limit of detection of the PSM-integrated 3D-μPADs for glucose in whole blood was 0.3 mM, and these devices demonstrated clinically relevant performance on diabetes patient blood samples. Our 3D-μPADs can also simultaneously detect multiple metabolic disease markers including glucose, cholesterol, and triglycerides in whole blood. Our results suggest that our printing method is useful for fabricating 3D-μPADs integrated with PSM for the direct detection of biomarkers in whole blood.

Direct sampling mass spectrometry for clinical analysis

Direct sampling mass spectrometry (MS) has been advancing aggressively, showing immense potential in translating MS into the clinical field. Unlike traditional MS analysis involving extensive sample preparation and chromatographic separation, quick and simple procedures with minimal sample pretreatment or purification became available with direct sampling. An overview of the development in this field is provided, including some representative ambient ionization and fast extraction methods. Quantitative applications of these methods are emphasized and their efficacy are highlighted from a clinical aspect; non-quantitative applications in clinical analysis are also discussed. This review also discusses the integration of direct sampling MS with miniature mass spectrometers and its future outlook as an emerging clinical tool for point-of-care analysis.

MS-Based Analytical Techniques: Advances in Spray-Based Methods and EI-LC-MS Applications

Mass spectrometry is the most powerful technique for the detection and identification of organic compounds. It can provide molecular weight information and a wealth of structural details that give a unique fingerprint for each analyte. Due to these characteristics, mass spectrometry-based analytical methods are showing an increasing interest in the scientific community, especially in food safety, environmental, and forensic investigation areas where the simultaneous detection of targeted and nontargeted compounds represents a key factor. In addition, safety risks can be identified at the early stage through online and real-time analytical methodologies. In this context, several efforts have been made to achieve analytical instrumentation able to perform real-time analysis in the native environment of samples and to generate highly informative spectra. This review article provides a survey of some instrumental innovations and their applications with particular attention to spray-based MS methods and food analysis issues. The survey will attempt to cover the state of the art from 2012 up to 2017.

Quantitative analysis of biofluid spots by coated blade spray mass spectrometry, a new approach to rapid screening

This study demonstrates the quantitative capabilities of coated blade spray (CBS) mass spectrometry (MS) for the concomitant analysis of multiple target substances in biofluid spots. In CBS-MS the analytes present in a given sample are first isolated and enriched in the thin coating of the CBS device. After a quick rinsing of the blade surface, as to remove remaining matrix, the analytes are quickly desorbed with the help of a solvent and then directly electrosprayed into the MS analyzer. Diverse pain management drugs, controlled substances, and therapeutic medications were successfully determined using only 10 µL of biofluid, with limits of quantitation in the low/sub ng·mL⁻¹ level attained within 7 minutes.