1
|
Mohanadas HP, Nair V, Doctor AA, Faudzi AAM, Tucker N, Ismail AF, Ramakrishna S, Saidin S, Jaganathan SK. A Systematic Analysis of Additive Manufacturing Techniques in the Bioengineering of In Vitro Cardiovascular Models. Ann Biomed Eng 2023; 51:2365-2383. [PMID: 37466879 PMCID: PMC10598155 DOI: 10.1007/s10439-023-03322-x] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2023] [Accepted: 07/13/2023] [Indexed: 07/20/2023]
Abstract
Additive Manufacturing is noted for ease of product customization and short production run cost-effectiveness. As our global population approaches 8 billion, additive manufacturing has a future in maintaining and improving average human life expectancy for the same reasons that it has advantaged general manufacturing. In recent years, additive manufacturing has been applied to tissue engineering, regenerative medicine, and drug delivery. Additive Manufacturing combined with tissue engineering and biocompatibility studies offers future opportunities for various complex cardiovascular implants and surgeries. This paper is a comprehensive overview of current technological advancements in additive manufacturing with potential for cardiovascular application. The current limitations and prospects of the technology for cardiovascular applications are explored and evaluated.
Collapse
Affiliation(s)
| | - Vivek Nair
- Computational Fluid Dynamics (CFD) Lab, Mechanical and Aerospace Engineering, University of Texas Arlington, Arlington, TX, 76010, USA
| | | | - Ahmad Athif Mohd Faudzi
- Faculty of Engineering, School of Electrical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
- Centre for Artificial Intelligence and Robotics, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
| | - Nick Tucker
- School of Engineering, College of Science, Brayford Pool, Lincoln, LN6 7TS, UK
| | - Ahmad Fauzi Ismail
- School of Chemical and Energy Engineering, Advanced Membrane Technology Research Centre (AMTEC), Universiti Teknologi Malaysia, Skudai, Malaysia
| | - Seeram Ramakrishna
- Department of Mechanical Engineering, Center for Nanofibers & Nanotechnology Initiative, National University of Singapore, Singapore, Singapore
| | - Syafiqah Saidin
- IJNUTM Cardiovascular Engineering Centre, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
| | - Saravana Kumar Jaganathan
- Faculty of Engineering, School of Electrical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.
- Centre for Artificial Intelligence and Robotics, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia.
- School of Engineering, College of Science, Brayford Pool, Lincoln, LN6 7TS, UK.
| |
Collapse
|
2
|
Froes I, Struthers D, Malacarne C, Perini M, Rossi M, Gregori P. The Beating Heart of Untapped Business Opportunities for Additive Manufacturing. OPEN RESEARCH EUROPE 2023; 3:143. [PMID: 38974837 PMCID: PMC11226946 DOI: 10.12688/openreseurope.16270.1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Accepted: 07/24/2023] [Indexed: 07/09/2024]
Abstract
This article presents a case that joins user-driven innovation and additive manufacturing (AM) towards latent business opportunities in the preparation for life threatening operations. Surgeons, confronted with a patient with a delicate heart condition, collaborated with a prototyping facility to print a realistic 3D model of the patient's aortic aneurysm. The model allowed the surgeons to first study and then experiment to determine the most effective operation procedure before the actual operation, which shortened the surgery time by approximately 70%. Reducing surgery time creates two forms of value: improving patient outcomes and reducing costs. Shorter times under anesthetic and on cardiopulmonary bypass correlate with better surgical results. Reducing healthcare costs brings broad societal benefits in both publicly and privately funded healthcare systems. We outline a case for makerspaces to capture value by joining their expertise and manufacturing equipment with the needs of nearby healthcare systems for novel business developments.
Collapse
Affiliation(s)
- Isabel Froes
- Copenhagen Business School, Management Society and Communication, Copenhagen Business School, Frederiksberg, 1820, Denmark
| | - David Struthers
- Copenhagen Business School, Management Society and Communication, Copenhagen Business School, Frederiksberg, 1820, Denmark
| | | | | | | | | |
Collapse
|
3
|
Kim RG, Abisado M, Villaverde J, Sampedro GA. A Survey of Image-Based Fault Monitoring in Additive Manufacturing: Recent Developments and Future Directions. SENSORS (BASEL, SWITZERLAND) 2023; 23:6821. [PMID: 37571604 PMCID: PMC10422627 DOI: 10.3390/s23156821] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2023] [Revised: 07/10/2023] [Accepted: 07/24/2023] [Indexed: 08/13/2023]
Abstract
Additive manufacturing (AM) has emerged as a transformative technology for various industries, enabling the production of complex and customized parts. However, ensuring the quality and reliability of AM parts remains a critical challenge. Thus, image-based fault monitoring has gained significant attention as an efficient approach for detecting and classifying faults in AM processes. This paper presents a comprehensive survey of image-based fault monitoring in AM, focusing on recent developments and future directions. Specifically, the proponents garnered relevant papers from 2019 to 2023, gathering a total of 53 papers. This paper discusses the essential techniques, methodologies, and algorithms employed in image-based fault monitoring. Furthermore, recent developments are explored such as the use of novel image acquisition techniques, algorithms, and methods. In this paper, insights into future directions are provided, such as the need for more robust image processing algorithms, efficient data acquisition and analysis methods, standardized benchmarks and datasets, and more research in fault monitoring. By addressing these challenges and pursuing future directions, image-based fault monitoring in AM can be enhanced, improving quality control, process optimization, and overall manufacturing reliability.
Collapse
Affiliation(s)
- Ryanne Gail Kim
- Research and Development Center, Philippine Coding Camp, 2401 Taft Ave, Malate, Manila 1004, Philippines;
| | - Mideth Abisado
- College of Computing and Information Technologies, National University, Manila 1008, Philippines;
| | - Jocelyn Villaverde
- School of Electrical, Electronics and Computer Engineering, Mapúa University, Manila 1002, Philippines;
| | - Gabriel Avelino Sampedro
- Research and Development Center, Philippine Coding Camp, 2401 Taft Ave, Malate, Manila 1004, Philippines;
- Faculty of Information and Communication Studies, University of the Philippines Open University, Laguna 4031, Philippines
- College of Computer Studies, De La Salle University, 2401 Taft Ave, Malate, Manila 1004, Philippines
| |
Collapse
|
4
|
Monfared V, Ramakrishna S, Nasajpour-Esfahani N, Toghraie D, Hekmatifar M, Rahmati S. Science and Technology of Additive Manufacturing Progress: Processes, Materials, and Applications. METALS AND MATERIALS INTERNATIONAL 2023:1-29. [PMID: 37359738 PMCID: PMC10238782 DOI: 10.1007/s12540-023-01467-x] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/16/2023] [Accepted: 05/05/2023] [Indexed: 06/28/2023]
Abstract
As a special review article, several significant and applied results in 3D printing and additive manufacturing (AM) science and technology are reviewed and studied. Which, the reviewed research works were published in 2020. Then, we would have another review article for 2021 and 2022. The main purpose is to collect new and applied research results as a useful package for researchers. Nowadays, AM is an extremely discussed topic and subject in scientific and industrial societies, as well as a new vision of the unknown modern world. Also, the future of AM materials is toward fundamental changes. Which, AM would be an ongoing new industrial revolution in the digital world. With parallel methods and similar technologies, considerable developments have been made in 4D in recent years. AM as a tool is related to the 4th industrial revolution. So, AM and 3D printing are moving towards the fifth industrial revolution. In addition, a study on AM is vital for generating the next developments, which are beneficial for human beings and life. Thus, this article presents the brief, updated, and applied methods and results published in 2020. Graphical Abstract
Collapse
Affiliation(s)
- Vahid Monfared
- Department of Mechanical Engineering, Zanjan Branch, Islamic Azad University, Zanjan, Iran
| | - Seeram Ramakrishna
- Department of Mechanical Engineering, National University of Singapore, Singapore, 117574 Singapore
| | | | - Davood Toghraie
- Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
| | - Maboud Hekmatifar
- Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
| | - Sadegh Rahmati
- Department of Medical Science and Technology, IAU University, Central Branch, Tehran, Iran
| |
Collapse
|
5
|
Noroozi R, Arif ZU, Taghvaei H, Khalid MY, Sahbafar H, Hadi A, Sadeghianmaryan A, Chen X. 3D and 4D Bioprinting Technologies: A Game Changer for the Biomedical Sector? Ann Biomed Eng 2023:10.1007/s10439-023-03243-9. [PMID: 37261588 DOI: 10.1007/s10439-023-03243-9] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2023] [Accepted: 05/14/2023] [Indexed: 06/02/2023]
Abstract
Bioprinting is an innovative and emerging technology of additive manufacturing (AM) and has revolutionized the biomedical sector by printing three-dimensional (3D) cell-laden constructs in a precise and controlled manner for numerous clinical applications. This approach uses biomaterials and varying types of cells to print constructs for tissue regeneration, e.g., cardiac, bone, corneal, cartilage, neural, and skin. Furthermore, bioprinting technology helps to develop drug delivery and wound healing systems, bio-actuators, bio-robotics, and bio-sensors. More recently, the development of four-dimensional (4D) bioprinting technology and stimuli-responsive materials has transformed the biomedical sector with numerous innovations and revolutions. This issue also leads to the exponential growth of the bioprinting market, with a value over billions of dollars. The present study reviews the concepts and developments of 3D and 4D bioprinting technologies, surveys the applications of these technologies in the biomedical sector, and discusses their potential research topics for future works. It is also urged that collaborative and valiant efforts from clinicians, engineers, scientists, and regulatory bodies are needed for translating this technology into the biomedical, pharmaceutical, and healthcare systems.
Collapse
Affiliation(s)
- Reza Noroozi
- School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
| | - Zia Ullah Arif
- Department of Mechanical Engineering, University of Management & Technology, Lahore, Sialkot Campus, Lahore, 51041, Pakistan
| | - Hadi Taghvaei
- School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
| | - Muhammad Yasir Khalid
- Department of Aerospace Engineering, Khalifa University of Science and Technology, PO Box: 127788, Abu Dhabi, United Arab Emirates
| | - Hossein Sahbafar
- School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
| | - Amin Hadi
- Cellular and Molecular Research Center, Yasuj University of Medical Sciences, Yasuj, Iran
| | - Ali Sadeghianmaryan
- Postdoctoral Researcher Fellow at Department of Biomedical Engineering, University of Memphis, Memphis, TN, USA.
- Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Dr., Saskatoon, SK, S7N5A9, Canada.
| | - Xiongbiao Chen
- Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Dr., Saskatoon, SK, S7N5A9, Canada
| |
Collapse
|
6
|
Espadinha-Cruz P, Neves A, Matos F, Godina R. Development of a maturity model for additive manufacturing: A conceptual model proposal. Heliyon 2023; 9:e16099. [PMID: 37234647 PMCID: PMC10205518 DOI: 10.1016/j.heliyon.2023.e16099] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Revised: 05/01/2023] [Accepted: 05/06/2023] [Indexed: 05/28/2023] Open
Abstract
Additive manufacturing (AM) is an emerging area with the potential to modify present business models in the near future. In contrast with conventional manufacturing (CM), AM allows the development of a product from a smaller amount of raw material, while allowing an improvement in properties in terms of weight and functionality. Its production flexibility and creativity in terms of materials have enabled not only the industry to use this technology, but also has been used in healthcare (e.g., in the production of human tissue) and by the final consumer. Despite the invaluable opportunities that this technology could provide, the uncertainties concerning its future developments and impacts on business models remain. New business models in AM will convey the need to: specialize the workforce in the design of new parts produced locally or remotely; regulation in the use and sharing of intellectual property rights by partner companies or between users; regulate the possibility of reverse engineering of highly customized products; etc. The present research proposes a conceptual maturity model to support the phases of evolution of AM in the industry, in supply chains, and in terms of open business models.
Collapse
Affiliation(s)
- Pedro Espadinha-Cruz
- UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
- Laboratório Associado de Sistemas Inteligentes, LASI, 4800-058 Guimarães, Portugal
| | - Angela Neves
- Department of Mechanical Engineering, Polytechnic Institute of Viseu, 3504-510 Viseu, Portugal
| | - Florinda Matos
- Instituto Universitário de Lisboa (ISCTE-IUL), Centro de Estudos sobre a Mudança Socioeconómica e o Território (DINÂMIA’CET), 1649-026 Lisboa, Portugal
| | - Radu Godina
- UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
- Laboratório Associado de Sistemas Inteligentes, LASI, 4800-058 Guimarães, Portugal
| |
Collapse
|
7
|
Elbadawi M, Basit A, Gaisford S. Energy Consumption and Carbon Footprint of 3D Printing in Pharmaceutical Manufacture. Int J Pharm 2023; 639:122926. [PMID: 37030639 DOI: 10.1016/j.ijpharm.2023.122926] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2023] [Revised: 03/30/2023] [Accepted: 04/01/2023] [Indexed: 04/10/2023]
Abstract
Achieving carbon neutrality is seen as an important goal in order to mitigate the effects of climate change, as carbon dioxide is a major greenhouse gas that contributes to global warming. Many countries, cities and organizations have set targets to become carbon neutral. The pharmaceutical sector is no exception, being a major contributor of carbon emissions (emitting approximately 55% more than the automotive sector for instance) and hence is in need of strategies to reduce its environmental impact. Three-dimensional (3D) printing is an advanced pharmaceutical fabrication technology that has the potential to replace traditional manufacturing tools. Being a new technology, the environmental impact of 3D printed medicines has not been investigated, which is a barrier to its uptake by the pharmaceutical industry. Here, the energy consumption (and carbon emission) of 3D printers is considered, focusing on technologies that have successfully been demonstrated to produce solid dosage forms. The energy consumption of 6 benchtop 3D printers was measured during standby mode and printing. On standby, energy consumption ranged from 0.03 to 0.17 kWh. The energy required for producing 10 printlets ranged from 0.06 to 3.08 kWh, with printers using high temperatures consuming more energy. Carbon emissions ranged between 11.60-112.16 g CO2 (eq) per 10 printlets, comparable with traditional tableting. Further analyses revealed that decreasing printing temperature was found to reduce the energy demand considerably, suggesting that developing formulations that are printable at lower temperatures can reduce CO2 emissions. The study delivers key initial insights into the environmental impact of a potentially transformative manufacturing technology and provides encouraging results in demonstrating that 3D printing can deliver quality medicines without being environmentally detrimental.
Collapse
Affiliation(s)
- Moe Elbadawi
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK
| | - Abdul Basit
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK
| | - Simon Gaisford
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK.
| |
Collapse
|
8
|
Rehman M, Yanen W, Mushtaq RT, Ishfaq K, Zahoor S, Ahmed A, Kumar MS, Gueyee T, Rahman MM, Sultana J. Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic. PROGRESS IN ADDITIVE MANUFACTURING 2022; 8:1-35. [PMID: 38625342 PMCID: PMC9793824 DOI: 10.1007/s40964-022-00373-9] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2021] [Accepted: 12/08/2022] [Indexed: 05/27/2023]
Abstract
The exponential rise of healthcare problems like human aging and road traffic accidents have developed an intrinsic challenge to biomedical sectors concerning the arrangement of patient-specific biomedical products. The additively manufactured implants and scaffolds have captured global attention over the last two decades concerning their printing quality and ease of manufacturing. However, the inherent challenges associated with additive manufacturing (AM) technologies, namely process selection, level of complexity, printing speed, resolution, biomaterial choice, and consumed energy, still pose several limitations on their use. Recently, the whole world has faced severe supply chain disruptions of personal protective equipment and basic medical facilities due to a respiratory disease known as the coronavirus (COVID-19). In this regard, local and global AM manufacturers have printed biomedical products to level the supply-demand equation. The potential of AM technologies for biomedical applications before, during, and post-COVID-19 pandemic alongwith its relation to the industry 4.0 (I4.0) concept is discussed herein. Moreover, additive manufacturing technologies are studied in this work concerning their working principle, classification, materials, processing variables, output responses, merits, challenges, and biomedical applications. Different factors affecting the sustainable performance in AM for biomedical applications are discussed with more focus on the comparative examination of consumed energy to determine which process is more sustainable. The recent advancements in the field like 4D printing and 5D printing are useful for the successful implementation of I4.0 to combat any future pandemic scenario. The potential of hybrid printing, multi-materials printing, and printing with smart materials, has been identified as hot research areas to produce scaffolds and implants in regenerative medicine, tissue engineering, and orthopedic implants.
Collapse
Affiliation(s)
- Mudassar Rehman
- Department of Industry Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xian, 710072 China
- Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, 54890 Pakistan
| | - Wang Yanen
- Department of Industry Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xian, 710072 China
| | - Ray Tahir Mushtaq
- Department of Industry Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xian, 710072 China
| | - Kashif Ishfaq
- Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, 54890 Pakistan
| | - Sadaf Zahoor
- Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, 54890 Pakistan
| | - Ammar Ahmed
- Department of Industry Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xian, 710072 China
| | - M. Saravana Kumar
- Graduate Institute of Manufacturing Technology, National Taipei University of Technology, Taipei, 10608 Taiwan
| | - Thierno Gueyee
- Department of Industry Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xian, 710072 China
| | - Md Mazedur Rahman
- Department of Industry Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xian, 710072 China
| | - Jakia Sultana
- Department of Industry Engineering, School of Mechanical Engineering, Northwestern Polytechnical University, Xian, 710072 China
| |
Collapse
|
9
|
Arif ZU, Khalid MY, Zolfagharian A, Bodaghi M. 4D bioprinting of smart polymers for biomedical applications: recent progress, challenges, and future perspectives. REACT FUNCT POLYM 2022. [DOI: 10.1016/j.reactfunctpolym.2022.105374] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
10
|
Alipour S, Taromian F, Ghomi ER, Zare M, Singh S, Ramakrishna S. Nitinol: From historical milestones to functional properties and biomedical applications. Proc Inst Mech Eng H 2022; 236:1595-1612. [DOI: 10.1177/09544119221123176] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Isoatomic NiTi alloy (Nitinol) has become an important biomaterial due to its unique characteristics, including shape memory effect, superelasticity, and high damping. Nitinol has been widely used in the biomedical field, including orthopedics, vascular stents, orthodontics, and other medical devices. However, there have been convicting views about the biocompatibility of Nitinol. Some studies have shown that Nitinol has extremely low cytotoxicity, indicating Nitinol has good biocompatibility. However, some studies have shown that the in-vivo corrosion resistance of Nitinol significantly decreases. This comprehensive paper discusses the historical developments of Nitinol, its biomedical applications, and its specific functional property. These render the suitability of Nitinol for such biomedical applications and provide insights into its in vivo and in vitro biocompatibility in the physiological environment and the antimicrobial strategies that can be applied to enhance its biocompatibility. Although 3D metal printing is still immature and Nitinol medical materials are difficult to be processed, Nitinol biomaterials have excellent potential and commercial value for 3D printing. However, there are still significant problems in the processing of Nitinol and improving its biocompatibility. With the deepening of research and continuous progress in surface modification and coating technology, a series of medical devices made from Nitinol are expected to be released soon.
Collapse
Affiliation(s)
- Saeid Alipour
- Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO, USA
| | - Farzaneh Taromian
- Department of Life Science Engineering, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran
| | - Erfan Rezvani Ghomi
- Center for nanotechnology and sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore
| | - Mina Zare
- Center for nanotechnology and sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore
| | - Sunpreet Singh
- Center for nanotechnology and sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore
- Mechanical Engineering, Chandigarh University, Punjab, India
| | - Seeram Ramakrishna
- Center for nanotechnology and sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore
| |
Collapse
|
11
|
Akbari Kenari M, Rezvani Ghomi E, Akbari Kenari A, Arabi SMS, Deylami J, Ramakrishna S. Biomedical applications of microfluidic devices: Achievements and challenges. POLYM ADVAN TECHNOL 2022. [DOI: 10.1002/pat.5847] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Mahsa Akbari Kenari
- Department of Chemical Engineering Polytechnique Montreal Montreal Quebec Canada
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering National University of Singapore Singapore Singapore
| | | | | | - Javad Deylami
- School of Physical and Mathematical Sciences Nanyang Technological University Singapore Singapore
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering National University of Singapore Singapore Singapore
| |
Collapse
|
12
|
Symmetry and Its Application in Metal Additive Manufacturing (MAM). Symmetry (Basel) 2022. [DOI: 10.3390/sym14091810] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
Additive manufacturing (AM) is proving to be a promising new and economical technique for the manufacture of metal parts. This technique basically consists of depositing material in a more or less precise way until a solid is built. This stage of material deposition allows the acquisition of a part with a quasi-final geometry (considered a Near Net Shape process) with a very high raw material utilization rate. There is a wide variety of different manufacturing techniques for the production of components in metallic materials. Although significant research work has been carried out in recent years, resulting in the wide dissemination of results and presentation of reviews on the subject, this paper seeks to cover the applications of symmetry, and its techniques and principles, to the additive manufacturing of metals.
Collapse
|
13
|
Akbarzadeh FZ, Ghomi ER, Ramakrishna S. Improving the corrosion behavior of magnesium alloys with a focus on AZ91 Mg alloy intended for biomedical application by microstructure modification and coating. Proc Inst Mech Eng H 2022; 236:1188-1208. [DOI: 10.1177/09544119221105705] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Magnesium alloys such as AZ91 have received much attention due to their attractive properties, including biocompatibility and lightness. Although magnesium is a potential candidate for implant application, due to its rapid degradation in the physiological environment, there are still some challenges to using it as biocompatible implants. In this regard, various techniques such as microstructure modification and coating are utilized to moderate the degradation rate of magnesium alloys. Therefore, efforts are being made to conduct more extensive research to produce magnesium implants with acceptable corrosion resistance. In this literature review, an overview of the history of research on the corrosion behavior, biodegradability, microstructure deformation mechanisms, crystallographic texture in magnesium alloys with a focus on AZ91 Mg alloy, is provided. In addition, the necessity of improving the properties of AZ91 Mg alloy by the two methods of improving microstructure and coating, and existing innovations in these methods are investigated.
Collapse
Affiliation(s)
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore
| |
Collapse
|
14
|
An Experimental Analysis to Determine the Load-Bearing Capacity of 3D Printed Metals. MATERIALS 2022; 15:ma15124333. [PMID: 35744392 PMCID: PMC9228229 DOI: 10.3390/ma15124333] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 06/14/2022] [Accepted: 06/15/2022] [Indexed: 12/04/2022]
Abstract
Reverse engineering is conducted based on the analysis of an already existing product. The results of such an analysis can be used to improve the functioning of the product or develop new organizational, economic, information technology, and other solutions that increase the efficiency of the entire business system, in particular 3D printed products. Therefore, the main aim of this research is to focus on evaluation of the load-bearing capacity of already existing 3D printed metals in order to see their suitability for the intended application and to obtain their relevant mechanical properties. To this end, 3D printed metallic bars with almost square cross-sections were acquired from an external company in China without any known processing parameters, apart from the assumption that specimens No. 1–3 are printed horizontally, and specimens No. 4–7 are printed vertically. Various experiments were conducted to study microstructural characteristics and mechanical properties of 3D printed metals. It was observed that specimens No. 1–6, were almost similar in hardness, while specimen No. 7 was reduced by about 4.5% due to the uneven surface. The average value of hardness for the specimens was found to be approximately 450 HV, whereas the load-extension graphs assessed prior point towards the conclusion that the specimens’ fractured in a brittle status, is due to the lack of plastic deformation. For different specimens of the 3D printed materials, the main defects were identified, namely, lack of fusion and porosity are directly responsible for the cracks and layer delamination, prevalent in SLM printed metals. An extensive presence of cracks and layer delamination prove that the printing of these metallic bars was completed in a quick and inaccurate manner, which led to higher percentages of lack of fusion due to either low laser power, high scan speed, or the wrong scan strategy.
Collapse
|
15
|
Ghomi ER, Khosravi F, Neisiany RE, Shakiba M, Zare M, Lakshminarayanan R, Chellappan V, Abdouss M, Ramakrishna S. Advances in electrospinning of aligned nanofiber scaffolds used for wound dressings. CURRENT OPINION IN BIOMEDICAL ENGINEERING 2022. [DOI: 10.1016/j.cobme.2022.100393] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
16
|
Fuentes JM, Arrieta MP, Boronat T, Ferrándiz S. Effects of Steam Heat and Dry Heat Sterilization Processes on 3D Printed Commercial Polymers Printed by Fused Deposition Modeling. Polymers (Basel) 2022; 14:polym14050855. [PMID: 35267683 PMCID: PMC8912381 DOI: 10.3390/polym14050855] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2022] [Revised: 02/15/2022] [Accepted: 02/17/2022] [Indexed: 02/01/2023] Open
Abstract
Fused deposition modeling (FDM), the most widely used additive manufacturing (AM) technology, is gaining considerable interest in the surgical sector for the production of single-use surgical devices that can be tailor-made according to specific requirements (e.g., type of patient surgery, specific shapes, etc.) due to its low cost, ease of access to materials (3D-printing filament), and the relatively low complexity. However, surgical 3D-printing parts should resist sterilization treatments without losing structural, mechanical, and dimensional accuracy. Thus, in this work, 3D-filaments based on poly(lactic acid) (PLA), poly(ethylene glycol-co-1,4-cyclohexanedimethanol terephthalate) (PETG), and a modified PETG material (CPE) were used to produce 3D-printed parts and further subjected to moist heat (MH) and dry heat (DH) sterilization processes as affordable and widely used sterilization processes in the medical field. The effect of MH and DH was evaluated by performing a complete mechanical, structural, thermal, and morphological characterization before and after both treatments. In general, the moist heat treatment produced a higher degradation of the polymeric matrix of PETG and CPE due to hydrolytic and thermal degradation, particularly affecting the tensile test and flexural properties. For instance, the linear coefficient of thermal expansion (LCTE) before glass transition temperature (Tg) increased 47% and 31% in PETG samples due to the MH and DH, respectively, while it increased 31% in CPE due to MH and was mainly maintained after the DH process. Nevertheless, in PLA, the MH produced an increase of 20% in LCTE value and the DH showed an increase of 33%. Dry heat treatment resulted in being more suitable for medical applications in which dimensional accuracy is not a key factor and there are no great mechanical demands (e.g., surgical guides).
Collapse
Affiliation(s)
- Jorge Mauricio Fuentes
- Departamento de Ingeniería Mecánica y de Materiales, Instituto de Tecnología de Materiales, Universitat Politécnica de València, Plaza Ferrándiz y Carbonell s/n, 03801 Alcoi, Spain;
- Ingeniería en Diseño Industrial, Facultad de Ingeniería y Ciencias Aplicadas, Universidad Central del Ecuador, Quito 170521, Ecuador
- Correspondence: (J.M.F.); (M.P.A.); (S.F.)
| | - Marina Patricia Arrieta
- Departamento Ingeniería Química Industrial y Medio Ambiente, Universidad Politécnica de Madrid, E.T.S.I. Industriales, 28006 Madrid, Spain
- Grupo de Investigación: Polímeros, Caracterización y Aplicaciones (POLCA), 28006 Madrid, Spain
- Correspondence: (J.M.F.); (M.P.A.); (S.F.)
| | - Teodomiro Boronat
- Departamento de Ingeniería Mecánica y de Materiales, Instituto de Tecnología de Materiales, Universitat Politécnica de València, Plaza Ferrándiz y Carbonell s/n, 03801 Alcoi, Spain;
| | - Santiago Ferrándiz
- Departamento de Ingeniería Mecánica y de Materiales, Instituto de Tecnología de Materiales, Universitat Politécnica de València, Plaza Ferrándiz y Carbonell s/n, 03801 Alcoi, Spain;
- Correspondence: (J.M.F.); (M.P.A.); (S.F.)
| |
Collapse
|
17
|
Design of Customized TPU Lattice Structures for Additive Manufacturing: Influence on the Functional Properties in Elastic Products. Polymers (Basel) 2021; 13:polym13244341. [PMID: 34960892 PMCID: PMC8705238 DOI: 10.3390/polym13244341] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2021] [Revised: 12/02/2021] [Accepted: 12/07/2021] [Indexed: 12/23/2022] Open
Abstract
This work focuses on evaluating and establishing the relationship of the influence of geometrical and manufacturing parameters in stiffness of additively manufactured TPU lattice structures. The contribution of this work resides in the creation of a methodology that focuses on characterizing the behavior of elastic lattice structures. Likewise, resides in the possibility of using the statistical treatment of results as a guide to find favorable possibilities within the range of parameters studied and to predict the behavior of the structures. In order to characterize their behavior, different types of specimens were designed and tested by finite element simulation of a compression process using Computer Aided Engineering (CAE) tools. The tests showed that the stiffness depends on the topology of the cells of the lattice structure. For structures with different cell topologies, it has been possible to obtain an increase in the reaction force against compression from 24.7 N to 397 N for the same manufacturing conditions. It was shown that other parameters with a defined influence on the stiffness of the structure were the temperature and the unit size of the cells, all due to the development of fusion mechanisms and the variation in the volume of material used, respectively.
Collapse
|
18
|
Jaiswal A, Rani S, Singh GP, Hassan M, Nasrin A, Gomes VG, Saxena S, Shukla S. Additive-Free All-Carbon Composite: A Two-Photon Material System for Nanopatterning of Fluorescent Sub-Wavelength Structures. ACS NANO 2021; 15:14193-14206. [PMID: 34435496 DOI: 10.1021/acsnano.1c01083] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The major bottleneck in fabrication of engineered 3D nanostructures is the choice of materials. Adding functionality to these nanostructures is a daunting task. In order to mitigate these issues, we report a two-photon patternable all carbon material system which can be used to fabricate fluorescent 3D micro/nanostructures using two-photon lithography, with subwavelength resolution. The synthesized material system eliminates the need to use conventional two-photon absorbing materials such as two-photon dyes or two-photon initiators. We have used two different trifunctional acrylate monomers and carbon dots, synthesized hydrothermally from a polyphenolic precursor, to formulate a two-photon processable resin. Upon two-photon excitation, photogenerated electrons in the excited states of the carbon dots facilitate the free radical formation at the surface of the carbon dots. These radicals, upon interaction with vinyl moieties, enable cross-linking of acrylate monomers. Free-radical induced two-photon polymerization of acrylate monomers without any conventional proprietary two-photon absorbing materials was accomplished at an ultrafine subwavelength resolution of 250 nm using 800 nm laser excitation. The effect of critical parameters such as average laser power, carbon dot concentration, and radiation exposure were determined for the fabrication of one-, two-, and three-dimensional functional nanostructures, applicable in a range of domains where fluorescence and toxicity are of the utmost importance. A fabrication speed as high as 100 mm/s was achieved. The ability to fabricate functional 3D micro-/nanostructures is anticipated to instigate a paradigm shift in various areas such as metamaterials, energy storage, drug delivery, and optoelectronics to name a few.
Collapse
Affiliation(s)
- Arun Jaiswal
- Nanostructures Engineering and Modeling Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai 400076, Maharashtra, India
| | - Sweta Rani
- Nanostructures Engineering and Modeling Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay-Monash Research Academy, Mumbai 400076, Maharashtra, India
| | - Gaurav Pratap Singh
- Nanostructures Engineering and Modeling Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai 400076, Maharashtra, India
| | - Mahbub Hassan
- School of Chemical and Biomolecular Engineering, The University of Sydney, Sydney, New South Wales 2006, Australia
| | - Aklima Nasrin
- School of Chemical and Biomolecular Engineering, The University of Sydney, Sydney, New South Wales 2006, Australia
| | - Vincent G Gomes
- School of Chemical and Biomolecular Engineering, The University of Sydney, Sydney, New South Wales 2006, Australia
- Nano Institute, The University of Sydney, Sydney, New South Wales 2006, Australia
| | - Sumit Saxena
- Nanostructures Engineering and Modeling Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai 400076, Maharashtra, India
- Nanostructures Engineering and Modeling Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay-Monash Research Academy, Mumbai 400076, Maharashtra, India
| | - Shobha Shukla
- Nanostructures Engineering and Modeling Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai 400076, Maharashtra, India
- Nanostructures Engineering and Modeling Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay-Monash Research Academy, Mumbai 400076, Maharashtra, India
| |
Collapse
|
19
|
Pishavar E, Khosravi F, Naserifar M, Rezvani Ghomi E, Luo H, Zavan B, Seifalian A, Ramakrishna S. Multifunctional and Self-Healable Intelligent Hydrogels for Cancer Drug Delivery and Promoting Tissue Regeneration In Vivo. Polymers (Basel) 2021; 13:2680. [PMID: 34451220 PMCID: PMC8399012 DOI: 10.3390/polym13162680] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2021] [Revised: 08/08/2021] [Accepted: 08/09/2021] [Indexed: 12/16/2022] Open
Abstract
Regenerative medicine seeks to assess how materials fundamentally affect cellular functions to improve retaining, restoring, and revitalizing damaged tissues and cancer therapy. As potential candidates in regenerative medicine, hydrogels have attracted much attention due to mimicking of native cell-extracellular matrix (ECM) in cell biology, tissue engineering, and drug screening over the past two decades. In addition, hydrogels with a high capacity for drug loading and sustained release profile are applicable in drug delivery systems. Recently, self-healing supramolecular hydrogels, as a novel class of biomaterials, are being used in preclinical trials with benefits such as biocompatibility, native tissue mimicry, and injectability via a reversible crosslink. Meanwhile, the localized therapeutics agent delivery is beneficial due to the ability to deliver more doses of therapeutic agents to the targeted site and the ability to overcome post-surgical complications, inflammation, and infections. These highly potential materials can help address the limitations of current drug delivery systems and the high clinical demand for customized drug release systems. To this aim, the current review presents the state-of-the-art progress of multifunctional and self-healable hydrogels for a broad range of applications in cancer therapy, tissue engineering, and regenerative medicine.
Collapse
Affiliation(s)
- Elham Pishavar
- Pharmaceutical Technology Institute, Mashhad University of Medical Sciences, Mashhad 91735, Iran;
| | - Fatemeh Khosravi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Mahshid Naserifar
- Pharmaceutical Technology Institute, Mashhad University of Medical Sciences, Mashhad 91735, Iran;
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Hongrong Luo
- Engineering Research Center in Biomaterials, Sichuan University, Chengdu 610064, China;
| | - Barbara Zavan
- Department of Morphology, Experimental Medicine and Surgery, University of Ferrara, Via Fossato di Mortara 70, 44121 Ferrara, Italy;
| | - Amelia Seifalian
- UCL Medical School, University College London, London WC1E 6BT, UK;
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| |
Collapse
|
20
|
Ghomi ER, Shakiba M, Ardahaei AS, Akbari M, Faraji M, Ataei S, Kohansal P, Jafari I, Abdouss M, Ramakrishna S. Innovations in drug delivery for chronic wound healing. Curr Pharm Des 2021; 28:340-351. [PMID: 34269663 DOI: 10.2174/1381612827666210714102304] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2021] [Revised: 05/24/2021] [Accepted: 06/03/2021] [Indexed: 11/22/2022]
Abstract
Wound healing is a varied and complex process designed to promptly restore standard skin structure, function, and appearance. To achieve this goal, different immune and biological systems participate in coordination through four separate steps, including homeostasis, inflammation, proliferation, and regeneration. Each step involves the function of other cells, cytokines, and growth factors. However, chronic ulcers, which are classified into three types of ulcers, namely vascular ulcers, diabetic ulcers, and pressure ulcers, cannot heal through the mentioned natural stages. It causes mental and physical problems for these people and, as a result, imposes high economic and social costs on society. In this regard, using a system that can accelerate the healing process of such chronic wounds, as an urgent need in the community, should be considered. Therefore, in this study, the innovations of drug delivery systems for the healing of chronic wounds using hydrogels, nanomaterial, and membranes are discussed and reviewed.
Collapse
Affiliation(s)
- Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, Faculty of Engineering, Singapore 117581, Singapore
| | | | - Ali Saedi Ardahaei
- Department of Polymer Engineering, Faculty of Engineering, Golestan University, Gorgan, P.O. Box 491888369, Iran
| | - Mahsa Akbari
- Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
| | - Mehdi Faraji
- School of Chemistry, College of Science, University of Tehran, P.O. Box 14155-6455, Tehran, Iran
| | - Shahla Ataei
- Department of Chemical Engineering, Isfahan University of Technology, Isfahan, 84156-83111, Iran
| | - Parisa Kohansal
- Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
| | - Iman Jafari
- Department of Civil and Environmental Engineering, Faculty of Engineering, National University of Singapore, Singapore 117576, Singapore
| | - Majid Abdouss
- Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, Faculty of Engineering, Singapore 117581, Singapore
| |
Collapse
|
21
|
Zare M, Bigham A, Zare M, Luo H, Rezvani Ghomi E, Ramakrishna S. pHEMA: An Overview for Biomedical Applications. Int J Mol Sci 2021; 22:6376. [PMID: 34203608 PMCID: PMC8232190 DOI: 10.3390/ijms22126376] [Citation(s) in RCA: 42] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2021] [Revised: 05/25/2021] [Accepted: 05/28/2021] [Indexed: 12/31/2022] Open
Abstract
Poly(2-hydroxyethyl methacrylate) (pHEMA) as a biomaterial with excellent biocompatibility and cytocompatibility elicits a minimal immunological response from host tissue making it desirable for different biomedical applications. This article seeks to provide an in-depth overview of the properties and biomedical applications of pHEMA for bone tissue regeneration, wound healing, cancer therapy (stimuli and non-stimuli responsive systems), and ophthalmic applications (contact lenses and ocular drug delivery). As this polymer has been widely applied in ophthalmic applications, a specific consideration has been devoted to this field. Pure pHEMA does not possess antimicrobial properties and the site where the biomedical device is employed may be susceptible to microbial infections. Therefore, antimicrobial strategies such as the use of silver nanoparticles, antibiotics, and antimicrobial agents can be utilized to protect against infections. Therefore, the antimicrobial strategies besides the drug delivery applications of pHEMA were covered. With continuous research and advancement in science and technology, the outlook of pHEMA is promising as it will most certainly be utilized in more biomedical applications in the near future. The aim of this review was to bring together state-of-the-art research on pHEMA and their applications.
Collapse
Affiliation(s)
- Mina Zare
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Ashkan Bigham
- Institute of Polymers, Composites and Biomaterials—National Research Council (IPCB-CNR), Viale J.F. Kennedy 54—Mostra d’Oltremare pad. 20, 80125 Naples, Italy;
| | - Mohamad Zare
- Health Science Center, Xi’an Jiaotong University, Xi’an 710061, China;
| | - Hongrong Luo
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China;
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| |
Collapse
|
22
|
The Life Cycle Assessment for Polylactic Acid (PLA) to Make It a Low-Carbon Material. Polymers (Basel) 2021; 13:polym13111854. [PMID: 34199643 PMCID: PMC8199738 DOI: 10.3390/polym13111854] [Citation(s) in RCA: 39] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2021] [Revised: 05/27/2021] [Accepted: 06/01/2021] [Indexed: 01/29/2023] Open
Abstract
The massive plastic production worldwide leads to a global concern for the pollution made by the plastic wastes and the environmental issues associated with them. One of the best solutions is replacing the fossil-based plastics with bioplastics. Bioplastics such as polylactic acid (PLA) are biodegradable materials with less greenhouse gas (GHG) emissions. PLA is a biopolymer produced from natural resources with good mechanical and chemical properties, therefore, it is used widely in packaging, agriculture, and biomedical industries. PLA products mostly end up in landfills or composting. In this review paper, the existing life cycle assessments (LCA) for PLA were comprehensively reviewed and classified. According to the LCAs, the energy and materials used in the whole life cycle of PLA were reported. Finally, the GHG emissions of PLA in each stage of its life cycle, including feedstock acquisition and conversion, manufacturing of PLA products, the PLA applications, and the end of life (EoL) options, were described. The most energy-intensive stage in the life cycle of PLA is its conversion. By optimizing the conversion process of PLA, it is possible to make it a low-carbon material with less dependence on energy sources.
Collapse
|
23
|
Zare M, Ghomi ER, Venkatraman PD, Ramakrishna S. Silicone‐based biomaterials for biomedical applications: Antimicrobial strategies and 3D printing technologies. J Appl Polym Sci 2021. [DOI: 10.1002/app.50969] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Affiliation(s)
- Mina Zare
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering National University of Singapore Singapore Singapore
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering National University of Singapore Singapore Singapore
| | | | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering National University of Singapore Singapore Singapore
| |
Collapse
|
24
|
Rezvani Ghomi E, Nourbakhsh N, Akbari Kenari M, Zare M, Ramakrishna S. Collagen-based biomaterials for biomedical applications. J Biomed Mater Res B Appl Biomater 2021; 109:1986-1999. [PMID: 34028179 DOI: 10.1002/jbm.b.34881] [Citation(s) in RCA: 111] [Impact Index Per Article: 37.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/18/2021] [Revised: 04/24/2021] [Accepted: 05/15/2021] [Indexed: 12/19/2022]
Abstract
Collagen is an insoluble fibrous protein that composes the extracellular matrix in animals. Although collagen has been used as a biomaterial since 1881, the properties and the complex structure of collagen are still extensive study subjects worldwide. In this article, several topics of importance for understanding collagen research are reviewed starting from its historical milestones, followed by the description of the collagen superfamily and its complex structures, with a focus on type I collagen. Subsequently, some of the superior properties of collagen-based biomaterials, such as biocompatibility, biodegradability, mechanical properties, and cell activities, are pinpointed. These properties make collagen applicable in biomedicine, such as wound healing, tissue engineering, surface coating of medical devices, and skin supplementation. Moreover, some antimicrobial strategies and the general host tissue responses regarding collagen as a biomaterial are presented. Finally, the current status and clinical application of the three-dimensional (3D) printing techniques for the fabrication of collagen-based scaffolds and the reconstruction of the human heart's constituents, such as capillary structures or even the entire organ, are discussed. Besides, an overall outlook for the future of this unique biomaterial is provided.
Collapse
Affiliation(s)
- Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore, Singapore
| | - Nooshin Nourbakhsh
- Yong Loo Lin School of Medicine, Department of Medicine, National University of Singapore, Singapore, Singapore
| | | | - Mina Zare
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore, Singapore
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore, Singapore
| |
Collapse
|
25
|
Shakiba M, Rezvani Ghomi E, Khosravi F, Jouybar S, Bigham A, Zare M, Abdouss M, Moaref R, Ramakrishna S. Nylon—A material introduction and overview for biomedical applications. POLYM ADVAN TECHNOL 2021. [DOI: 10.1002/pat.5372] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Affiliation(s)
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering Faculty of Engineering, National University of Singapore Singapore Singapore
| | - Fatemeh Khosravi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering Faculty of Engineering, National University of Singapore Singapore Singapore
| | - Shirzad Jouybar
- Department of Chemistry Amirkabir University of Technology Tehran Iran
| | - Ashkan Bigham
- Institute of Polymers, Composites and Biomaterials—National Research Council (IPCB‐CNR) Naples Italy
| | - Mina Zare
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering Faculty of Engineering, National University of Singapore Singapore Singapore
| | - Majid Abdouss
- Department of Chemistry Amirkabir University of Technology Tehran Iran
| | - Roxana Moaref
- Department of Polymer Engineering Amirkabir University of Technology Tehran Iran
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering Faculty of Engineering, National University of Singapore Singapore Singapore
| |
Collapse
|
26
|
Momeni S, Rezvani Ghomi E, Shakiba M, Shafiei-Navid S, Abdouss M, Bigham A, Khosravi F, Ahmadi Z, Faraji M, Abdouss H, Ramakrishna S. The Effect of Poly (Ethylene glycol) Emulation on the Degradation of PLA/Starch Composites. Polymers (Basel) 2021; 13:1019. [PMID: 33806074 PMCID: PMC8036416 DOI: 10.3390/polym13071019] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2021] [Revised: 03/22/2021] [Accepted: 03/23/2021] [Indexed: 02/07/2023] Open
Abstract
As a hydrophilic renewable polymer, starch has been widely used in biocompatible plastics as a filler for more than two decades. The present study aimed at investigating the effects of polyethylene glycol (PEG), as a plasticizer, on the physicochemical properties of a hybrid composite-polylactic acid (PLA) and thermoplastic starch (TPS). A solvent evaporation process was adopted to gelatinize the starch and disparate PEG contents ranging from 3 to 15 wt.% (with respect to the sample weight) were examined. It was revealed that the increase in the PEG content was accompanied by an increment in the starch gelatinization degree. Referring to the microstructural analyses, the TPS/PLA mixture yielded a ductile hybrid composite with a fine morphology and a uniform phase. Nevertheless, two different solvents, including acetone and ethanol, were used to assess if they had any effect on the hybrid's morphology, tensile strength and thermal properties. It was found that ethanol culminated in a porous hybrid composite with a finer morphology and better starch distribution in the PLA structure than acetone. As the result of PEG addition to the composite, the crystallinity and tensile strength were decreased, whereas the elongation increased. The hydrolytic degradation of samples was assessed under different pH and thermal conditions. Moreover, the microbial degradation of the PLA/TPS hybrid composite containing different PEG molar fractions was investigated in the soil for 45 days. The rate of degradation in both hydrolytic and biodegradation increased in the samples with a higher amount of PEG with ethanol solvent.
Collapse
Affiliation(s)
- Sarieh Momeni
- Department of Chemistry, Amirkabir University of Technology, Tehran 15875-4413, Iran; (S.M.); (Z.A.)
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Mohamadreza Shakiba
- Department of Chemistry, Amirkabir University of Technology, Tehran 15875-4413, Iran; (S.M.); (Z.A.)
| | - Saied Shafiei-Navid
- Department of Organic Chemistry, Faculty of Chemistry, University of Mazandaran, Babolsar 47416-95447, Iran;
| | - Majid Abdouss
- Department of Chemistry, Amirkabir University of Technology, Tehran 15875-4413, Iran; (S.M.); (Z.A.)
| | - Ashkan Bigham
- Institute of Polymers, Composites and Biomaterials—National Research Council (IPCB-CNR), Viale J.F. Kennedy 54—Mostra d’Oltremare pad. 20, 80125 Naples, Italy;
| | - Fatemeh Khosravi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Zahed Ahmadi
- Department of Chemistry, Amirkabir University of Technology, Tehran 15875-4413, Iran; (S.M.); (Z.A.)
| | - Mehdi Faraji
- School of Chemistry, College of Science, University of Tehran, Tehran 14155-6455, Iran;
| | - Hamidreza Abdouss
- Department of Polymer, Amirkabir University of Technology, Tehran 15875-4413, Iran;
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| |
Collapse
|
27
|
Rajabi N, Rezaei A, Kharaziha M, Bakhsheshi-Rad HR, Luo H, RamaKrishna S, Berto F. Recent Advances on Bioprinted Gelatin Methacrylate-Based Hydrogels for Tissue Repair. Tissue Eng Part A 2021; 27:679-702. [PMID: 33499750 DOI: 10.1089/ten.tea.2020.0350] [Citation(s) in RCA: 50] [Impact Index Per Article: 16.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022] Open
Abstract
Bioprinting of body tissues has gained great attention in recent years due to its unique advantages, including the creation of complex geometries and printing the patient-specific tissues with various drug and cell types. The most momentous part of the bioprinting process is bioink, defined as a mixture of living cells and biomaterials (especially hydrogels). Among different biomaterials, natural polymers are the best choices for hydrogel-based bioinks due to their intrinsic biocompatibility and minimal inflammatory response in body condition. Gelatin methacryloyl (GelMA) hydrogel is one of the high-potential hydrogel-based bioinks due to its easy synthesis with low cost, great biocompatibility, transparent structure that is useful for cell monitoring, photocrosslinkability, and cell viability. Furthermore, the potential of adjusting properties of GelMA due to the synthesis protocol makes it a suitable choice for soft or hard tissues. In this review, different methods for the bioprinting of GelMA-based bioinks, as well as various effective process parameters, are reviewed. Also, several solutions for challenges in the printing of GelMA-based bioinks are discussed, and applications of GelMA-based bioprinted tissues argued as well. Impact statement Bioprinting has been demonstrated as a promising and alternative approach for organ transplantation to develop various types of living tissue. Bioinks, with great biological characteristics similar to the host tissues and rheological/flow features, are the first requirements for the successful bioprinting approach. Gelatin methacryloyl (GelMA) hydrogel is one of the high-potential hydrogel-based bioinks. This review provides a comprehensive look at different methods for the bioprinting of GelMA-based bioinks and applications of GelMA-based bioprinted tissues for tissue repair.
Collapse
Affiliation(s)
- Negar Rajabi
- Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
| | - Ali Rezaei
- Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
| | - Mahshid Kharaziha
- Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
| | - Hamid Reza Bakhsheshi-Rad
- Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
| | - Hongrong Luo
- National Research Center for Biomaterials, Sichuan University, Chengdu, China
| | - Seeram RamaKrishna
- Department of Mechanical Engineering, National University of Singapore, Singapore
| | - Filippo Berto
- Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway
| |
Collapse
|
28
|
Foroughi F, Rezvani Ghomi E, Morshedi Dehaghi F, Borayek R, Ramakrishna S. A Review on the Life Cycle Assessment of Cellulose: From Properties to the Potential of Making It a Low Carbon Material. MATERIALS (BASEL, SWITZERLAND) 2021; 14:714. [PMID: 33546379 PMCID: PMC7913577 DOI: 10.3390/ma14040714] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/28/2020] [Revised: 01/26/2021] [Accepted: 01/29/2021] [Indexed: 02/07/2023]
Abstract
The huge plastic production and plastic pollution are considered important global issues due to environmental aspects. One practical and efficient way to address them is to replace fossil-based plastics with natural-based materials, such as cellulose. The applications of different cellulose products have recently received increasing attention because of their desirable properties, such as biodegradability and sustainability. In this regard, the current study initially reviews cellulose products' properties in three categories, including biopolymers based on the cellulose-derived monomer, cellulose fibers and their derivatives, and nanocellulose. The available life cycle assessments (LCA) for cellulose were comprehensively reviewed and classified at all the stages, including extraction of cellulose in various forms, manufacturing, usage, and disposal. Finally, due to the development of low-carbon materials in recent years and the importance of greenhouse gases (GHG) emissions, the proposed solutions to make cellulose a low carbon material were made. The optimization of the cellulose production process, such as the recovery of excessive solvents and using by-products as inputs for other processes, seem to be the most important step toward making it a low carbon material.
Collapse
Affiliation(s)
- Firoozeh Foroughi
- Department of Materials Science and Engineering, Faculty of Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore;
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Fatemeh Morshedi Dehaghi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| | - Ramadan Borayek
- Department of Materials Science and Engineering, Faculty of Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore;
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering, National University of Singapore, Singapore 117581, Singapore;
| |
Collapse
|
29
|
Khan A, Dias F, Neekhra S, Singh B, Srivastava R. Designing and Immunomodulating Multiresponsive Nanomaterial for Cancer Theranostics. Front Chem 2021; 8:631351. [PMID: 33585406 PMCID: PMC7878384 DOI: 10.3389/fchem.2020.631351] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2020] [Accepted: 12/22/2020] [Indexed: 01/14/2023] Open
Abstract
Cancer has been widely investigated yet limited in its manifestation. Cancer treatment holds innovative and futuristic strategies considering high disease heterogeneity. Chemotherapy, radiotherapy and surgery are the most explored pillars; however optimal therapeutic window and patient compliance recruit constraints. Recently evolved immunotherapy demonstrates a vital role of the host immune system to prevent metastasis recurrence, still undesirable clinical response and autoimmune adverse effects remain unresolved. Overcoming these challenges, tunable biomaterials could effectively control the co-delivery of anticancer drugs and immunomodulators. Current status demands a potentially new approach for minimally invasive, synergistic, and combinatorial nano-biomaterial assisted targeted immune-based treatment including therapeutics, diagnosis and imaging. This review discusses the latest findings of engineering biomaterial with immunomodulating properties and implementing novel developments in designing versatile nanosystems for cancer theranostics. We explore the functionalization of nanoparticle for delivering antitumor therapeutic and diagnostic agents promoting immune response. Through understanding the efficacy of delivery system, we have enlightened the applicability of nanomaterials as immunomodulatory nanomedicine further advancing to preclinical and clinical trials. Future and present ongoing improvements in engineering biomaterial could result in generating better insight to deal with cancer through easily accessible immunological interventions.
Collapse
Affiliation(s)
- Amreen Khan
- Department of Biosciences and Bioengineering, Indian Institute of Technology Bombay, Mumbai, India
- Centre for Research in Nanotechnology and Science, Indian Institute of Technology Bombay, Mumbai, India
| | - Faith Dias
- Department of Chemical Engineering, Thadomal Shahani Engineering College, Mumbai, India
| | - Suditi Neekhra
- Department of Biosciences and Bioengineering, Indian Institute of Technology Bombay, Mumbai, India
| | - Barkha Singh
- Department of Biosciences and Bioengineering, Indian Institute of Technology Bombay, Mumbai, India
- Centre for Research in Nanotechnology and Science, Indian Institute of Technology Bombay, Mumbai, India
| | - Rohit Srivastava
- Department of Biosciences and Bioengineering, Indian Institute of Technology Bombay, Mumbai, India
| |
Collapse
|
30
|
Additive Manufacturing Processes in Medical Applications. MATERIALS 2021; 14:ma14010191. [PMID: 33401601 PMCID: PMC7796413 DOI: 10.3390/ma14010191] [Citation(s) in RCA: 96] [Impact Index Per Article: 32.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/26/2020] [Revised: 12/16/2020] [Accepted: 12/27/2020] [Indexed: 12/29/2022]
Abstract
Additive manufacturing (AM, 3D printing) is used in many fields and different industries. In the medical and dental field, every patient is unique and, therefore, AM has significant potential in personalized and customized solutions. This review explores what additive manufacturing processes and materials are utilized in medical and dental applications, especially focusing on processes that are less commonly used. The processes are categorized in ISO/ASTM process classes: powder bed fusion, material extrusion, VAT photopolymerization, material jetting, binder jetting, sheet lamination and directed energy deposition combined with classification of medical applications of AM. Based on the findings, it seems that directed energy deposition is utilized rarely only in implants and sheet lamination rarely for medical models or phantoms. Powder bed fusion, material extrusion and VAT photopolymerization are utilized in all categories. Material jetting is not used for implants and biomanufacturing, and binder jetting is not utilized for tools, instruments and parts for medical devices. The most common materials are thermoplastics, photopolymers and metals such as titanium alloys. If standard terminology of AM would be followed, this would allow a more systematic review of the utilization of different AM processes. Current development in binder jetting would allow more possibilities in the future.
Collapse
|