Interactions of amphiphilic block copolymers with lipid model membranes

Mimicking effects of cholesterol in lipid bilayer membranes by self-assembled amphiphilic block copolymers

The effect of cholesterol on biological membranes is important in biochemistry. In this study, a polymer system is used to simulate the consequences of varying cholesterol content in membranes. The system consists of an AB-diblock copolymer, a hydrophilic homopolymer hA, and a hydrophobic rigid homopolymer C, corresponding to phospholipid, water, and cholesterol, respectively. The effect of the C-polymer content on the membrane is studied within the framework of a self-consistent field model. The results show that the liquid-crystal behavior of B and C has a great influence on the chemical potential of cholesterol in bilayer membranes. The effects of the interaction strength between components, characterized by the Flory-Huggins parameters and the Maier-Saupe parameter, were studied. Some consequences of adding a coil headgroup to the C-rod are presented. Results of our model are compared to experimental findings for cholesterol-containing lipid bilayer membranes.

Polyphilicity-An Extension of the Concept of Amphiphilicity in Polymers

Recent developments in synthetic pathways as simple reversible-deactivation radical polymerization (RDRP) techniques and quantitative post-polymerization reactions, most notoriously 'click' reactions, leading to segmented copolymers, have broadened the molecular architectures accessible to polymer chemists as a matter of routine. Segments can be blocks, grafted chains, branchings, telechelic end-groups, covalently attached nanoparticles, nanodomains in networks, even sequences of random copolymers, and so on. In this review, we describe the variety of the segmented synthetic copolymers landscape from the point of view of their chemical affinity, or synonymous philicity, in bulk or with their surroundings, such as solvents, permeant gases, and solid surfaces. We focus on recent contributions, current trends, and perspectives regarding polyphilic copolymers, which have, in addition to hydrophilic and lipophilic segments, other philicities, for example, towards solvents, fluorophilic entities, ions, silicones, metals, nanoparticles, and liquid crystalline moieties.

Role of Surface Tension in Gas Nanobubble Stability Under Ultrasound

Shell-stabilized gas nanobubbles have recently captured the interest of the research community for their potential application as ultrasound contrast agents for molecular imaging and therapy of cancer. However, the very existence of submicron gas bubbles (especially uncoated bubbles) has been a subject of controversy in part due to their predicted Laplace overpressure reaching several atmospheres, making them supposedly thermodynamically unstable. In addition, the backscatter resulting from ultrasound interactions with nanoparticles is not predicted to be readily detectable at clinically relevant frequencies. Despite this, a number of recent reports have successfully investigated the presence and applications of nanobubbles for ultrasound imaging. The mechanism behind these observations remains unclear but is thought to be, in part, influenced heavily by the biophysical properties of the bubble-stabilizing shell. In this study, we investigated the effects of incorporating the triblock copolymer surfactant, Pluronic, into the lipid monolayer of nanobubbles. The impact of shell composition on membrane equilibrium surface tension was investigated using optical tensiometry, using both pendant drop and rising drop principles. However, these techniques proved to be insufficient in explaining the observed behavior and stability of nanobubbles under ultrasound. Additionally, we sought to investigate changes in membrane surface tension (surface pressure) at different degrees of compression (analogous to the bubble oscillations in the ultrasound field) via Langmuir-Blodgett experiments. Results from this study show a significant decrease ( p < 0.0001) in the nanobubble equilibrium surface tension through the incorporation of Pluronic L10, especially at a ratio of 0.2, where this value decreased by 28%. However, this reduction in surface pressure was seen only for specific compositions and varied with monolayer structure (crystalline phase or liquid-crystalline packing). These results indicate a potential for optimization wherein surface pressure can be maximized for both contraction and expansion phases with the proper lipid to Pluronic balance and microstructure.

Effect of Perfluoroalkyl Endgroups on the Interactions of Tri-Block Copolymers with Monofluorinated F-DPPC Monolayers

We studied the interaction of amphiphilic and triphilic polymers with monolayers prepared from F-DPPC (1-palmitoyl-2-(16-fluoropalmitoyl)-sn-glycero-3-phosphocholine), a phospholipid with a single fluorine atom at the terminus of the sn-2 chain, an analogue of dipalmitoyl-phosphatidylcholine (DPPC). The amphiphilic block copolymers contained a hydrophobic poly(propylene oxide) block flanked by hydrophilic poly(glycerol monomethacrylate) blocks (GP). F-GP was derived from GP by capping both termini with perfluoro-n-nonyl segments. We first studied the adsorption of GP and F-GP to lipid monolayers of F-DPPC. F-GP was inserted into the monolayer up to a surface pressure Π of 42.4 mN m⁻¹, much higher than GP (32.5 mN m⁻¹). We then studied isotherms of lipid-polymer mixtures co-spread at the air-water interface. With increasing polymer content in the mixture a continuous shift of the onset of the liquid-expanded (LE) to liquid-condensed (LC) transition towards higher molecular and higher area per lipid molecule was observed. F-GP had a larger effect than GP indicating that it needed more space. At a Π-value of 32 mN m⁻¹, GP was excluded from the mixed monolayer, whereas F-GP stayed in F-DPPC monolayers up to 42 mN m⁻¹. F-GP is thus more stably anchored in the monolayer up to higher surface pressures. Images of mixed monolayers were acquired using different fluorescent probes and showed the presence of perfluorinated segments of F-GP at LE-LC domain boundaries.

Structural insights into the effect of cholinium-based ionic liquids on the critical micellization temperature of aqueous triblock copolymers

A symmetrical PEG–PPG–PEG triblock copolymer with 82.5% PEG as the hydrophilic end blocks, and PPG as the hydrophobic middle block, was chosen to study the effect of ionic liquids on the critical micellization temperature of block copolymers in aqueous solution.

Unusual triskelion patterns and dye-labelled GUVs: consequences of the interaction of cholesterol-containing linear-hyperbranched block copolymers with phospholipids

Cholesterol (Ch) linked to a linear-hyperbranched block copolymer composed of poly(ethylene glycol) (PEG) and poly(glycerol) (hbPG) was investigated for its membrane anchoring properties. Two polyether-based linear-hyperbranched block copolymers with and without a covalently attached rhodamine fluorescence label (Rho) were employed (Ch-PEG30-b-hbPG23 and Ch-PEG30-b-hbPG17-Rho). Compression isotherms of co-spread 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) with the respective polymers were measured on the Langmuir trough and the morphology development of the liquid-condensed (LC) domains was studied by epi-fluorescence microscopy. LC domains were strongly deformed due to the localization of the polymers at the domain interface, indicating a line activity for both block copolymers. Simultaneously, it was observed that the presence of the fluorescence label significantly influences the domain morphology, the rhodamine labelled polymer showing higher line activity. Adsorption isotherms of the polymers to the water surface or to monolayers of DPPC and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), respectively, were collected. Again the rhodamine labelled polymer showed higher surface activity and a higher affinity for insertion into lipid monolayers, which was negligibly affected when the sub-phase was changed to aqueous sodium chloride solution or phosphate buffer. Calorimetric investigations in bulk confirmed the results found using tensiometry. Confocal laser scanning microscopy (CLSM) of giant unilamellar vesicles (GUVs) also confirmed the polymers' fast adsorption to and insertion into phospholipid membranes.

Temperature-responsive telechelic dipalmitoylglyceryl poly(N-isopropylacrylamide) vesicles: real-time morphology observation in aqueous suspension and in the presence of giant liposomes

Telechelic α,ω-di(twin-tailed poly(N-isopropylacrylamides)) form polymersomes in water that increase in size by fusion when the water temperature exceeds the polymers cloud point temperature. Hybrid vesicles form in mixed suspensions of giant phospholipid liposomes and polymersomes by adsorption/fusion, and undergo further transformations, such as fission.

Lyotropic Liquid Crystals Formed in Brij35/Copolymer/Water System

Phase diagram of poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) copolymer (AL-64) and nonionic surfactant dodecyl polyoxyethylene (23) ether (Brij 35) aqueous solutions has been determined at 25°C using the titration method. Hexagonal, cubic and two lamellar liquid crystalline phases were found and characterized by use of polar optical microscopy and small-angle X-ray scattering (SAXS) techniques. Dynamic rheological measurements were further performed on the found liquid crystals. It has been shown that the cubic and lamellar phases exhibit elastic properties, while the hexagonal phase presents viscoelastic properties. At the constant water content, with increase in the concentration of the copolymer AL-64, the rheological G′ and G″ moduli, the critical shear stress and the network strength of the hexagonal liquid crystals get decreased. The two lamellar phases exhibit clearly different rheological properties, and the lamellar phase lies in Brij35 rich side possess stronger network strength than the hexagonal phase, through the rheological data analyses.

Understanding the interaction of block copolymers with DMPC lipid bilayer using coarse-grained molecular dynamics simulations

In this paper, we present a computational model of the adsorption and percolation mechanism of poloxamers (poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) triblock copolymers) across a 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid bilayer. A coarse-grained model was used to cope with the long time scale of the percolation process. The simulations have provided details of the interaction mechanism of Pluronics with lipid bilayer. In particular, the results have shown that polymer chains containing a PPO block with a length comparable to the DMPC bilayer thickness, such as P85, tends to percolate across the lipid bilayer. On the contrary, Pluronics with a shorter PPO chain, such as L64 and F38, insert partially into the membrane with the PPO block part while the PEO blocks remain in water on one side of the lipid bilayer. The percolation of the polymers into the lipid tail groups reduces the membrane thickness and increases the area per lipid. These effects are more evident for P85 than L64 or F38. Our findings are qualitatively in good agreement with published small-angle X-ray scattering experiments that have evidenced a thinning effect of Pluronics on the lipid bilayer as well as the role of the length of the PPO block on the permeation process of the polymer through the lipid bilayer. Our theoretical results complement the experimental data with a detailed structural and dynamic model of poloxamers at the interface and inside the lipid bilayer.

Interactions of DPPC with semitelechelic poly(glycerol methacrylate)s with perfluoroalkyl end groups

Semitelechelic poly(glycerol methacrylate)s having a perfluoroalkyl end group (PGMA(n)-F(9)) were synthesized by ATRP. The interactions of these polymers with different degrees of polymerization with chiral or racemic dipalmitoylphosphatidylcholine (l-DPPC, d-DPPC, or rac-DPPC) monolayers at the air/water interface were studied. Langmuir trough measurements coupled with epifluorescence microscopy allowed for the observation of domain formation within the coexistence region of liquid-expanded (LE) and liquid-condensed (LC) states of DPPC in mixed DPPC-polymer films prepared by spreading a solution of both compounds in the same organic solvent (cospread films). Because of the incorporation of PGMA(n)-F(9) polymers into the LE phase and their line-active behavior, a formation of novel types of domains could be observed. During compression, a thinning out of the tips of two- to six-lobed flowerlike domain structures and consecutive spiral formation appeared for l- and d-DPPC within the two-phase coexistence region (LE/LC) of the monolayer. When rac-DPPC was used, symmetrical stripe formation was induced at the vertices of the domains and fingerprint-like structures were created by convection-inducing movements of the domains at the air/water interface. Additional investigations of the interaction of PGMA(n)-F(9) with DPPC vesicles using differential scanning calorimetry (DSC) supported the finding on the monolayer system that the incorporation of the polymers into the lipid monolayers is not solely driven by the perfluoroalkyl chain but significantly by the hydrophilic polymer part. Apparently, interactions of the PGMA chain with the lipid headgroups are important as the interactions increase with the elongation of the polymer chain, indicating that the polymer also has hydrophobic character.