NMR and MRI studies of drug delivery systems

3D Printed Drug Delivery Systems in Action-Magnetic Resonance Imaging and Relaxometry for Monitoring Mass Transport Phenomena

The hypothesis of the study was that (1) 3D printed drug delivery systems (DDS) could be characterized in situ during drug release using NMR/MRI techniques in terms of mass transport phenomena description (interfacial phenomena), particularly for systems dealing with two mobile phases (e.g., water and low molecular weight liquid polymer); (2) consequently, it could be possible to deduce how these interfacial mass transport phenomena influence functional properties of 3D printed DDS. Matrix drug delivery systems, prepared using masked stereolithography (MSLA), containing poly(ethylene glycol) diacrylate (PEGDA) and low molecular weight polyethylene glycol (PEG) with ropinirole hydrochloride (RH) were studied as example formulations. The PEGDA to PEG (mobile phase) concentration ratio influenced drug release. It was reflected in spatiotemporal changes in parametric T2 relaxation time (T2) and amplitude (A) images obtained using magnetic resonance imaging (MRI) and T1-T2 relaxation time correlations obtained using low-field time-domain nuclear magnetic resonance (LF TD NMR) relaxometry during incubation in water. For most of the tested formulations, two signal components related to PEG and water were assessed in the hydrated matrices by MRI relaxometry (parametric T2/A images). The PEG component faded out due to outward PEG diffusion and was gradually replaced by the water component. Both components spatially and temporally changed their parameters, reflecting evolving water-polymer interactions. The study shows that dynamic phenomena related to bidirectional mass transport can be quantified in situ using NMR and MRI techniques to gain insight into drug release mechanisms from 3D printed DDS systems.

Spatially resolved polymer mobilization revisited - Three-dimensional, UltraShort Echo Time (3D UTE) magnetic resonance imaging of sodium alginate matrix tablets

HYPOTHESIS

Three-dimensional 1H UltraShort Echo Time magnetic resonance imaging (1H 3D UTE MRI) of the matrix tablet made of hydrophilic polymer hydrated in heavy water (D2O) will allow investigation of the hydration-induced spatiotemporal evolution of the material originally included in the matrix tablet during manufacturing (i.e., polymer chains and bound water).

EXPERIMENTS

The oblong-shaped sodium alginate matrix tablets were used to verify the hypothesis. The matrix was measured before and during hydration in D2O for up to 2 h using the 1H 3D UTE MRI. Five echo times (first at 20 μs) were used, resulting in five three-dimensional images (one image for each echo time). In chosen cross-sections, two parametric images, i.e., amplitude and T2* relaxation time maps, were calculated using "pixel-by-pixel" mono-exponential fitting.

FINDINGS

The regions of the alginate matrix with T2* shorter than 600 μs were analyzed before (air-dry matrix) and during hydration (parametric, spatiotemporal analysis). During the study, only hydrogen nuclei (protons) pre-existing in the air-dry sample (polymer and bound water) were monitored because the hydration medium (D2O) was not visible. As a result, it was found that morphological changes in regions having T2* shorter than 300 μs were the effect of fast initial water ingress into the core of the matrix and subsequent polymer mobilization (early hydration providing additional 5% w/w hydration medium content relating to air-dry matrix). In particular, evolving layers in T2* maps were detected, and a fracture network was formed shortly after the matrix immersion in D2O. The current study presented a coherent picture of polymer mobilization accompanied by local polymer density decrease. We concluded, that the T2* mapping using 3D UTE MRI can effectively be applied as a polymer mobilization marker.

Advances in Structure Pharmaceutics from Discovery to Evaluation and Design

Drug delivery systems (DDSs) play an important role in delivering active pharmaceutical ingredients (APIs) to targeted sites with a predesigned release pattern. The chemical and biological properties of APIs and excipients have been extensively studied for their contribution to DDS quality and effectiveness; however, the structural characteristics of DDSs have not been adequately explored. Structure pharmaceutics involves the study of the structure of DDSs, especially the three-dimensional (3D) structures, and its interaction with the physiological and pathological structure of organisms, possibly influencing their release kinetics and targeting abilities. A systematic overview of the structures of a variety of dosage forms, such as tablets, granules, pellets, microspheres, powders, and nanoparticles, is presented. Moreover, the influence of structures on the release and targeting capability of DDSs has also been discussed, especially the in vitro and in vivo release correlation and the structure-based organ- and tumor-targeting capabilities of particles with different structures. Additionally, an in-depth discussion is provided regarding the application of structural strategies in the DDSs design and evaluation. Furthermore, some of the most frequently used characterization techniques in structure pharmaceutics are briefly described along with their potential future applications.

Low-field time-domain NMR relaxometry for studying polymer hydration and mobilization in sodium alginate matrix tablets

Sodium alginate is used in various industries, including food, pharmaceutical, and agriculture. Matrix systems, e.g., tablets, and granules, are macro samples with incorporated active substances. During hydration, they are neither equilibrated nor homogenous. Phenomena occurring during hydration of such systems are complex, determine their functional properties and hence require multimodal analysis. Still, there's a lack of comprehensive view. The study aimed to obtain unique characteristics of the sodium alginate matrix during hydration, particularly considering polymer mobilization phenomena using low-field time-domain NMR relaxometry in H₂O and D₂O. An increase in total signal during 4 h of hydration in D₂O of ca. 30 μV resulted from polymer/water mobilization. Modes in T₁-T₂ maps and changes in their amplitudes reflected physicochemical state of the polymer/water system: e.g. air-dry polymer mode (T₁/T₂ ~ 600) and two mobilized polymer/water modes (at T₁/T₂ ~ 40 and T₁/T₂ ~ 20). The study describes the approach to evaluating the hydration of the sodium alginate matrix in terms of the temporal evolution of proton pools: those existing in the matrix before hydration and those entering the matrix from the bulk water. It provides data complementary to spatially resolved methods like MRI and microCT.

Nano Spray-Dried Drugs for Oral Administration: A Review

Spray drying is an important technology that is fast, simple, reproducible, and scalable. It has a wide application range, that is, in food, chemicals, and encapsulation of pharmaceuticals. The technology can be divided into conventional spray drying and nano spray drying. The key advantage of nano spray drying is the production of drug-loaded nanosized particles for various drug delivery applications. The recent developments in nano spray dryer technology and the market launch of the Nano Spray Dryer B-90 by Büchi Labortechnik AG in 2009 enabled the production of submicron spray-dried particles. This review focuses on nanosized drug delivery systems intended for oral administration produced by nano spray drying. First, the nano spray drying concept, the basic technologies implemented in the equipment, and the effects of the various process parameters on the final dry submicron powder properties are presented. Then, the topics of new formulation strategies of oral drugs are highlighted with examples that have entered the research literature in recent years. Next, the subjects of direct conversion of poorly water-soluble drugs, encapsulation of drugs, and drying of preformed nanoparticles are considered. Finally, topics such as morphology, particle size, size distribution, surface analysis, bioavailability, drug release, release kinetics, and solid-state characterization (by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, nuclear magnetic resonance) of oral drug delivery systems produced by nano spray drying are discussed. The review attempts to provide a comprehensive knowledge base with current literature and foresight to researchers working in the field of pharmaceutical technology and nanotechnology and especially in the field of nano spray drying.

Hydrogels as Drug Delivery Systems: A Review of Current Characterization and Evaluation Techniques

Owing to their tunable properties, controllable degradation, and ability to protect labile drugs, hydrogels are increasingly investigated as local drug delivery systems. However, a lack of standardized methodologies used to characterize and evaluate drug release poses significant difficulties when comparing findings from different investigations, preventing an accurate assessment of systems. Here, we review the commonly used analytical techniques for drug detection and quantification from hydrogel delivery systems. The experimental conditions of drug release in saline solutions and their impact are discussed, along with the main mathematical and statistical approaches to characterize drug release profiles. We also review methods to determine drug diffusion coefficients and in vitro and in vivo models used to assess drug release and efficacy with the goal to provide guidelines and harmonized practices when investigating novel hydrogel drug delivery systems.

Supramolecular Fluorine Magnetic Resonance Spectroscopy Probe Polymer Based on Passerini Bifunctional Monomer

A water-soluble fluorine magnetic resonance spectroscopy host-guest probe, P(HPA-co-AdamCF₃A), was successfully constructed from the facile synthesis of a bifunctional monomer via a quantitative Passerini reaction. Supramolecular complexation with (2-hydroxypropyl)-β-cyclodextrin promoted a change in the chemical environment, leading to modulation of both the relaxation properties as well as chemical shift of the fluorine moieties. This change was used to probe the supramolecular interaction by ¹⁹F MRI spectroscopy and give insight into fluorine probe formulation. This work provides a fundamental basis for an ¹⁹F MR imaging tracer capable of assessing host-guest inclusion and a potential model to follow the fate of a drug delivery system in vivo.

Real time MRI to elucidate the functionality of coating films intended for modified release

Polymer films based on mixtures of ethyl cellulose (EC) and hydroxypropyl cellulose (HPC) have been widely used to coat pellets and tablets to modify the release profile of drugs. For three different EC/HPC films we used ¹H and ¹⁹F MRI in combination with a designed release cell to monitor the drug, polymer and water in 5 dimensional (5D) datasets; three spatial, one diffusion or relaxation and a temporal dimension, in real time. We observed that the water inflow through the films correlated with the initiation of the dissolution of the drug in the tablet beneath the film. Leaching of the pore forming HPC further accelerated water penetration and resulted in a drug release onset after a hydrostatic pressure was generated below the film indicated by positional changes of the film. For the more permeable film, both water ingress and drug egress showed a large variability of release over the film surface indicating the heterogeneity of the system. Furthermore, the ¹H diffusion dataset revealed the formation of a gel layer of HPC at the film surface. We conclude that the setup presented provides a significant level of details, which are not achieved with traditional methods.

Evidence of superdiffusive nanoscale motion in anionic polymeric hydrogels: Analysis of PGSE- NMR data and comparison with drug release properties

Polymeric hydrogels are promising candidates for drug delivery applications, thanks to their ability to encapsulate, transport and release a wide range of chemicals. The successful application of these materials requires a deep understanding of the mechanisms governing solute transport at the nanoscale and its impact on release kinetics. In this work, we investigate the translational diffusion of ibuprofen loaded in anionic agarose-carbomer (AC) hydrogels by ¹H high resolution magic angle spinning (HR-MAS) NMR spectroscopy, and compare it to its macroscopic release kinetics. The analysis of the experimental NMR data provides the first evidence of superdiffusion for ibuprofen in AC hydrogels. Superdiffusive transport is observed in the majority of our samples, especially those with the smallest mesh size (7 nm) and highest ibuprofen concentrations (90-120 mg/mL). This outcome is rationalized in terms of heavy-tailed distributions of spatial displacements (Lèvy flights) and of waiting times, which depend on the nanoscopic structural heterogeneity of the gels and the strong but reversible association between ibuprofen and the agarose matrix.

Spatially-resolved 1H NMR relaxation-exchange measurements in heterogeneous media

In the last decades, the ¹H NMR T₂-T₂ relaxation-exchange (REXSY) technique has become an essential tool for the molecular investigation of simple and complex fluids in heterogeneous porous solids and soft matter, where the mixing-time-evolution of cross-correlated T₂-T₂ peaks enables a quantitative study of diffusive exchange kinetics in multi-component systems. Here, we present a spatially-resolved implementation of the T₂-T₂ correlation technique, named z-T₂-T₂, based on one-dimensional spatial mapping along z using a rapid frequency-encode imaging scheme. Compared to other phase-encoding methods, the adopted MRI technique has two distinct advantages: (i) is has the same experimental duration of a standard (bulk) T₂-T₂ measurement, and (ii) it provides a high spatial resolution. The proposed z-T₂-T₂ method is first validated against bulk T₂-T₂ measurements on homogeneous phantom consisting of cyclohexane uniformly imbibed in finely-sized α-Al₂O₃ particles at a spatial resolution of 0.47 mm; thereafter, its performance is demonstrated, on a layered bed of multi-sized α-Al₂O₃ particles, for revealing spatially-dependent molecular exchange kinetics properties of intra- and inter-particle cyclohexane as a function of particle size. It is found that localised z-T₂-T₂ spectra provide well resolved cross peaks whilst such resolution is lost in standard bulk T₂-T₂ data. Future prospective applications of the method lie, in particular, in the local characterisation of mass transport phenomena in multi-component porous media, such as rock cores and heterogeneous catalysts.

Characterisation of pore structures of pharmaceutical tablets: A review

Traditionally, the development of a new solid dosage form is formulation-driven and less focus is put on the design of a specific microstructure for the drug delivery system. However, the compaction process particularly impacts the microstructure, or more precisely, the pore architecture in a pharmaceutical tablet. Besides the formulation, the pore structure is a major contributor to the overall performance of oral solid dosage forms as it directly affects the liquid uptake rate, which is the very first step of the dissolution process. In future, additive manufacturing is a potential game changer to design the inner structures and realise a tailor-made pore structure. In pharmaceutical development the pore structure is most commonly only described by the total porosity of the tablet matrix. Yet it is of great importance to consider other parameters to fully resolve the interplay between microstructure and dosage form performance. Specifically, tortuosity, connectivity, as well as pore shape, size and orientation all impact the flow paths and play an important role in describing the fluid flow in a pharmaceutical tablet. This review presents the key properties of the pore structures in solid dosage forms and it discusses how to measure these properties. In particular, the principles, advantages and limitations of helium pycnometry, mercury porosimetry, terahertz time-domain spectroscopy, nuclear magnetic resonance and X-ray computed microtomography are discussed.

UV imaging in pharmaceutical analysis

UV imaging provides spatially and temporally resolved absorbance measurements, which are highly useful in pharmaceutical analysis. Commercial UV imaging instrumentation was originally developed as a detector for separation sciences, but the main use is in the area of in vitro dissolution and release testing studies. The review covers the basic principles of the technology and summarizes the main applications in relation to intrinsic dissolution rate determination, excipient compatibility studies and in vitro release characterization of drug substances and vehicles intended for parenteral administration. UV imaging has potential for providing new insights to drug dissolution and release processes in formulation development by real-time monitoring of swelling, precipitation, diffusion and partitioning phenomena. Limitations of current instrumentation are discussed and a perspective to new developments and opportunities given as new instrumentation is emerging.

Analysis of Molecular Interaction of Drugs within β-Cyclodextrin Cavity by Solution-State NMR Relaxation

The prime focus of the present study is to employ NMR relaxation measurement to address the intermolecular interactions, as well as motional dynamics, of drugs, viz., paracetamol and aspirin, encapsulated within the β-cyclodextrin (β-CD) cavity. In this report, we have attempted to demonstrate the applicability of nonselective (R₁^ns), selective (R₁^se), and bi-selective (R₁^bs) spin-lattice relaxation rates to infer dynamical parameters, for example, the molecular rotational correlation times (τ_c) and cross-relaxation rates (σ_ij) of the encapsulated drugs. Molecular rotational correlation times of the free drugs were calculated using the selective relaxation rate in the fast molecular motion time regime (ω_H²τ_c² ≪ 1 and R₁^ns/R₁^se ≈ 1.500), whereas that of the 1:1 complexed drugs were found from the ratio of R₁^ns/R₁^se in the intermediate motion time regime (ω_H²τ_c² ∼ 1 and R₁^ns/R₁^se ≈ 1.054), and these values were compared with each other to confirm the formation of inclusion complexes. Furthermore, the cross-relaxation rates were used to evaluate the intermolecular proton distances. Also, density functional theory calculations were performed to determine the minimum energy geometry of the inclusion complexes and the results compared with those from experiments. The report, thus, presents the possibility of utilizing NMR relaxation data, a more cost-effective experiment, to calculate internuclear distances in the case of drug-supramolecule complexes that are generally obtained by extremely time consuming two-dimensional nuclear Overhauser enhancement-based methods. A plausible mode of insertion of the drug molecules into the β-CD cavity has also been described based on experimental NMR relaxation data analysis.

μ-ViP: Customized virtual phantom for quantitative magnetic resonance micro-imaging at high magnetic field

The applications of Magnetic Resonance micro-Imaging (MRμI) cover nowadays a wide range of fields. However few of them present quantitative measurements when the sample of interest changes over time or in case of a long acquisition time. In this domain, two challenges have to be overcome: the introduction of a phantom as a reference signal and the guarantee that this signal is stable over the experiment duration while some conditions such as temperature and/or the moisture are varied. The aim of the present study was to implement a dedicated experimental set-up to generate a virtual phantom (ViP) signal in a vertical-bore 11.7 T NMR spectrometer, equipped with a micro-imaging probe. This study shows that the generation of a micro-imaging-dedicated ViP (μ-ViP) signal is of great benefit for on-line quality control of the spectrometer performance during acquisition in the case of real-time experiments. Thus, μViP represents a step towards improvement of the magnetic resonance signal quantification in small samples.

Speciation of precious metal anti-cancer complexes by NMR spectroscopy

Understanding the mechanism of action of anti-cancer agents is of paramount importance for drug development. NMR spectroscopy can provide insights into the kinetics and thermodynamics of the binding of metallodrugs to biomolecules. NMR is most sensitive for highly abundant I=1/2 nuclei with large magnetic moments. Polarization transfer can enhance NMR signals of insensitive nuclei at physiologically-relevant concentrations. This paper reviews NMR methods for speciation of precious metal anti-cancer complexes, including platinum-group and gold-based anti-cancer agents. Examples of NMR studies involving interactions with DNA and proteins in particular are highlighted.

Recent advances towards the fabrication and biomedical applications of responsive polymeric assemblies and nanoparticle hybrid superstructures

We highlight recent developments, microstructural control, and biomedical applications of stimuli-responsive polymeric assemblies and responsive hybrid superstructures.

Cell-penetrating hyperbranched polyprodrug amphiphiles for synergistic reductive milieu-triggered drug release and enhanced magnetic resonance signals

The rational design of theranostic nanoparticles exhibiting synergistic turn-on of therapeutic potency and enhanced diagnostic imaging in response to tumor milieu is critical for efficient personalized cancer chemotherapy. We herein fabricate self-reporting theranostic drug nanocarriers based on hyperbranched polyprodrug amphiphiles (hPAs) consisting of hyperbranched cores conjugated with reduction-activatable camptothecin prodrugs and magnetic resonance (MR) imaging contrast agent (Gd complex), and hydrophilic coronas functionalized with guanidine residues. Upon cellular internalization, reductive milieu-actuated release of anticancer drug in the active form, activation of therapeutic efficacy (>70-fold enhancement in cytotoxicity), and turn-on of MR imaging (∼9.6-fold increase in T1 relaxivity) were simultaneously achieved in the simulated cytosol milieu. In addition, guanidine-decorated hPAs exhibited extended blood circulation with a half-life up to ∼9.8 h and excellent tumor cell penetration potency. The hyperbranched chain topology thus provides a novel theranostic polyprodrug platform for synergistic imaging/chemotherapy and enhanced tumor uptake.

Microenvironmental pH measurement during sodium naproxenate dissolution in acidic medium by UV/vis imaging

Variable dissolution from sodium salts of drugs containing a carboxylic acid group after passing the acidic environment of the stomach may affect oral bioavailability. The aim of the present proof of concept study was to investigate pH effects in relation to the dissolution of sodium naproxenate in 0.01M hydrochloric acid. For this purpose a UV/vis imaging-based approach capable of measuring microenvironmental pH in the vicinity of the solid drug compact as well as monitoring drug dissolution was developed. Using a pH indicating dye real-time spatially resolved measurement of pH was achieved. Sodium naproxenate, can significantly alter the local pH of the dissolution medium, is eventually neutralized and precipitates as the acidic species naproxen. The developed approach is considered useful for detailed studies of pH dependent dissolution phenomena in dissolution testing.

Magnetic resonance microscopy for assessment of morphological changes in hydrating hydroxypropylmethylcellulose matrix tablets in situ-is it possible to detect phenomena related to drug dissolution within the hydrated matrices?

Purpose

So far, the hydrated part of the HPMC matrix has commonly been denoted as a “gel” or “pseudogel” layer. No MRI-based results have been published regarding observation of internal phenomena related to drug dissolution inside swelling polymeric matrices during hydration. The purpose of the study was to detect such phenomena.

Methods

Multiparametric, spatially and temporally resolved T₂ MR relaxometry, in situ, was applied to study formation of the hydration progress in HPMC matrix tablets loaded with L-dopa and ketoprofen using a 11.7 T MRI system. Two spin-echo based pulse sequences were used, one of them specifically designed to study short T₂ signals.

Results

Two components in the T₂ decay envelope were estimated and spatial distributions of their parameters, i.e. amplitudes and T₂ values, were obtained. Based on the data, different region formation patterns (i.e. multilayer structure) were registered depending on drug presence and solubility. Inside the matrix with incorporated sparingly soluble drug a specific layer formation due to drug dissolution was detected, whereas a matrix with very slightly soluble drug does not form distinct external “gel-like” layer.

Conclusions

We have introduced a new paradigm in the characterization of hydrating matrices using ¹H MRI methods. It reflects molecular mobility and concentration of water inside the hydrated matrix. For the first time, drug dissolution related phenomena, i.e. particular front and region formation, were observed by MRI methods.