Collapse mechanisms and extreme deformation of particle-laden interfaces

Model aggregated 2D suspensions in shear and compression: From a fluid layer to an auxetic interface?

HYPOTHESIS

Particle-laden interfaces play a crucial role in engineering stability of multiphase systems. However, a full understanding of the mechanical properties in shear and compression, especially in relation to the underlying microstructural changes, is as yet lacking. In this study, we investigate the interfacial rheological moduli in heterogeneous networks of aggregated 2D suspensions using different deformation modes and relate these moduli to changes in the microstructure.

EXPERIMENTS

Interfacial rheological experiments were conducted at different surface coverages and clean kinematic conditions, namely in (i) simple shear flow in a modified double wall-ring geometry and (ii) isotropic compression in a custom-built radial trough, while monitoring the evolution of the microstructure.

FINDINGS

The compressive moduli increase non-monotonically with decreasing void fraction, reflecting the combined effect of aggregate densification and reduction of void structures, with rotation of rigid clusters playing a significant role in closing voids. However, the shear moduli increase monotonically, which correlates with the increase in fractal dimension of the aggregates making up the backbone network. We also observe that these interfaces act as 2D auxetic materials at intermediate coverages, which is surprising given their amorphous structure. This finding has potential implications for the resilience of particle-coated bubbles or droplets subjected to time-varying compression-expansion deformations.

Particle Size and Rheology of Silica Particle Networks at the Air-Water Interface

Silica nanoparticles find utility in different roles within the commercial domain. They are either employed in bulk within pharmaceutical formulations or at interfaces in anti-coalescing agents. Thus, studying the particle attributes contributing to the characteristics of silica particle-laden interfaces is of interest. The present work highlights the impact of particle size (i.e., 250 nm vs. 1000 nm) on the rheological properties of interfacial networks formed by hydrophobically modified silica nanoparticles at the air-water interface. The particle surface properties were examined using mobility measurements, Langmuir trough studies, and interfacial rheology techniques. Optical microscopy imaging along with Langmuir trough studies revealed the microstructure associated with various surface pressures and corresponding surface coverages (ϕ). The 1000 nm silica particle networks gave rise to a higher surface pressure at the same coverage compared to 250 nm particles on account of the stronger attractive capillary interactions. Interfacial rheological characterization revealed that networks with 1000 nm particles possess higher surface modulus and yield stress in comparison to the network obtained with 250 nm particles at the same surface pressure. These findings highlight the effect of particle size on the rheological characteristics of particle-laden interfaces, which is of importance in determining the stability and flow response of formulations comprising particle-stabilized emulsions and foams.

Unjamming strongly compressed rafts: Effects of the compression direction

We experimentally study the unjamming dynamics of strongly compressed particle rafts confined between two fixed walls and two movable barriers. The back barrier is made of an elastic band, whose deflection indicates the local stress. The front barrier is pierced by a gate, whose opening triggers local unjamming. Prior to gate opening, the rafts are quasistatically compressed by moving only one of the two barriers, in the vicinity of which folds form. Using high-speed imaging, we follow the raft relaxation with folded, jammed, and unjammed areas and measure the velocity fields inside and outside the confined domain. Two very different behaviors develop. For rafts compressed by the back barrier, only partial unjamming occurs. At the end of the process, many folds remain and the back stress does not relax. The flow develops mostly along the compression axis and the particles passing the gate form a dense raft whose width is the gate width. For rafts compressed at the front, quasitotal unjamming is observed. Almost no folds persist and only minimal stress remains, if any. The particles flow along the compression axis but also normally to it and form a rather circular and not dense assembly. Both the force chain network orientation and the initial fold location could cause the unjamming difference. Other effects, such as a different pressure field or simple steric hindrance, cannot be excluded.

A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Particles adsorbed to fluid interfaces are ubiquitous in industry, nature or life. The wide range of properties arising from the assembly of particles at fluid interface has stimulated an intense research activity on shed light to the most fundamental physico-chemical aspects of these systems. These include the mechanisms driving the equilibration of the interfacial layers, trapping energy, specific inter-particle interactions and the response of the particle-laden interface to mechanical perturbations and flows. The understanding of the physico-chemistry of particle-laden interfaces becomes essential for taking advantage of the particle capacity to stabilize interfaces for the preparation of different dispersed systems (emulsions, foams or colloidosomes) and the fabrication of new reconfigurable interface-dominated devices. This review presents a detailed overview of the physico-chemical aspects that determine the behavior of particles trapped at fluid interfaces. This has been combined with some examples of real and potential applications of these systems in technological and industrial fields. It is expected that this information can provide a general perspective of the topic that can be exploited for researchers and technologist non-specialized in the study of particle-laden interfaces, or for experienced researcher seeking new questions to solve.

Effect of Janus particles and non-ionic surfactants on the collapse of the oil-water interface under compression

HYPOTHESIS

Janus particles (JPs) and surfactants express different behaviors at the oil-water interface under compression. When both are present at the interface, their synergies result in a different collapse mechanism than when present individually depending on the concentration of the JPs and surfactants.

EXPERIMENTS

Coarse-grained modeling methods were used to probe the synergies between Janus nanoparticles and nonionic surfactants on the stability of an oil-water interface under compression. When both JPs and surfactants were present, the interface was covered at 0-55% area by JPs and contained surfactants at 0-40% of the interfacial surfactant concentration corresponding to the critical micelle concentration (CMC).

FINDINGS

Compression of the interface with only surfactants resulted in the expulsion of surfactant molecules to the water phase once the interfacial concentration of surfactant molecules reached the CMC value. Compression of a Janus particle-laden interface past the closed-packing point led to a buckled interface, so that the total interfacial area remained constant upon further compression. When both surfactants and JPs were present on the interface, JPs still caused buckling, which helped retain the surfactant molecules on the interface. The interface exhibited a higher level of deformation in presence of surfactants. When the surfactant concentration was high, under compression, the surfactants partitioned into the water phase, but the buckling of the interface persisted.

Armored Droplets as Soft Nanocarriers for Encapsulation and Release under Flow Conditions

Technical challenges in precision medicine and environmental remediation create an increasing demand for smart materials that can select and deliver a probe load to targets with high precision. In this context, soft nanomaterials have attracted considerable attention due to their ability to simultaneously adapt their morphology and functionality to complex ambients. Two major challenges are to precisely control this adaptability under dynamic conditions and provide predesigned functionalities that can be manipulated by external stimuli. Here, we report on the computational design of a distinctive class of soft nanocarriers, built from armored nanodroplets, able to selectively encapsulate or release a probe load under specific flow conditions. First, we describe in detail the mechanisms at play in the formation of pocket-like structures in armored nanodroplets and their stability under external flow. Then we use that knowledge to test the capacity of these pockets to yield flow-assisted encapsulation or expulsion of a probe load. Finally, the rheological properties of these nanocarriers are put into perspective with those of delivery systems employed in pharmaceutical and cosmetic technology.

Particle-laden fluid/fluid interfaces: physico-chemical foundations

Particle-laden fluid/fluid interfaces are ubiquitous in academia and industry, which has fostered extensive research efforts trying to disentangle the physico-chemical bases underlying the trapping of particles to fluid/fluid interfaces as well as the properties of the obtained layers. The understanding of such aspects is essential for exploiting the ability of particles on the stabilization of fluid/fluid interface for the fabrication of novel interface-dominated devices, ranging from traditional Pickering emulsions to more advanced reconfigurable devices. This review tries to provide a general perspective of the physico-chemical aspects associated with the stabilization of interfaces by colloidal particles, mainly chemical isotropic spherical colloids. Furthermore, some aspects related to the exploitation of particle-laden fluid/fluid interfaces on the stabilization of emulsions and foams will be also highlighted. It is expected that this review can be used for researchers and technologist as an initial approach to the study of particle-laden fluid layers.

Electric-field-induced deformation, yielding, and crumpling of jammed particle shells formed on non-spherical Pickering droplets

Droplets covered with densely packed solid particles, often called Pickering droplets, are used in a variety of fundamental studies and practical applications. For many applications, it is essential to understand the mechanics of such particle-laden droplets subjected to external stresses. Several research groups have studied theoretically and experimentally the deformation, relaxation, rotation, and stability of Pickering droplets. Most of the research concerns spherical Pickering droplets. However, little is known about non-spherical Pickering droplets with arrested particle shells subjected to compressive stress. The experimental results presented here contribute to filling this gap in research. We deform arrested non-spherical Pickering droplets by subjecting them to electric fields, and study the effect of droplet geometry and size, as well as particle size and electric field strength, on the deformation and yielding of arrested non-spherical Pickering droplets. We explain why a more aspherical droplet and/or a droplet covered with a shell made of larger particles required higher electric stress to deform and yield. We also show that an armored droplet can absorb the electric stress differently (i.e., through either in-plane or out-of-plane particle rearrangements) depending on the strength of the applied electric field. Furthermore, we demonstrate that particle shells may fail through various crumpling instabilities, including ridge formation, folding, and wrinkling, as well as inward indentation.

Tuning Surface Chemistry and Ionic Strength to Control Nanoparticle Adsorption and Elastic Dilational Modulus at Air-Brine Interface

The relationship between the interfacial rheology of nanoparticle (NP) laden air-brine interfaces and NP adsorption and interparticle interactions is not well understood, particularly as a function of the surface chemistry and salinity. Herein, a nonionic ether diol on the surface of silica NPs provides steric stabilization in bulk brine and at the air-brine interface, whereas a second smaller underlying hydrophobic ligand raises the hydrophobicity to promote NP adsorption. The level of NPs adsorption at steady state is sufficient to produce an interface with a relatively strong elastic dilational modulus E' = dγ/d ln A. However, the interface is ductile with a relatively slow change in E' as the interfacial area is varied over a wide range during compression and expansion. In contrast, for silica NPs stabilized with only a single hydrophobic ligand, the interfaces are often more fragile and may fracture with small changes in area. The presence of concentrated divalent cations improves E' and ductility by screening electrostatic dipolar repulsion and strengthening the attractive forces between nanoparticles. The ability to tune the interfacial rheology with NP surface chemistry is of great interest for designing more stable gas/brine foams.

Tuning Nanoparticle Surface Chemistry and Interfacial Properties for Highly Stable Nitrogen-In-Brine Foams

The design of surface chemistries on nanoparticles (NPs) to stabilize gas/brine foams with concentrated electrolytes, especially with divalent ions, has been elusive. Herein, we tune the surface of 20 nm silica NPs by grafting a hydrophilic and a hydrophobic ligand to achieve two seemingly contradictory goals of colloidal stability in brine and high NP adsorption to yield a viscoelastic gas-brine interface. Highly stable nitrogen/water (N₂/brine) foams are formed with CaCl₂ concentrations up to 2% from 25 to 90 °C. The viscoelastic gas-brine interface retards drainage of the lamellae, and the high dilational elasticity arrests coarsening (Ostwald ripening) with no observable change in foam bubble size over 48 h. The ability to design NP-laden viscoelastic interfaces for highly stable foams, even with high divalent ion concentrations, is of fundamental mechanistic interest for a broad range of foam applications and in particular foams for CO₂ sequestration and enhanced oil recovery.

Janus Particles at Fluid Interfaces: Stability and Interfacial Rheology

The use of the Janus motif in colloidal particles, i.e., anisotropic surface properties on opposite faces, has gained significant attention in the bottom-up assembly of novel functional structures, design of active nanomotors, biological sensing and imaging, and polymer blend compatibilization. This review is focused on the behavior of Janus particles in interfacial systems, such as particle-stabilized (i.e., Pickering) emulsions and foams, where stabilization is achieved through the binding of particles to fluid interfaces. In many such applications, the interface could be subjected to deformations, producing compression and shear stresses. Besides the physicochemical properties of the particle, their behavior under flow will also impact the performance of the resulting system. This review article provides a synopsis of interfacial stability and rheology in particle-laden interfaces to highlight the role of the Janus motif, and how particle anisotropy affects interfacial mechanics.

Buckling and Drying Kinetics of Particle-Stabilized Water Droplets Fully or Partially Immersed in an Oil Layer

We have investigated the effect of buckling of particle-stabilized water droplets on the drying kinetics. Particle-stabilized water droplets in an oil phase were prepared and the shrinking modes of the droplets during drying were controlled by the wettability of the particles. We obtained water droplets with and without buckling and used them in drying experiments. The drying times were comparable when the droplets were fully immersed in a thick oil layer. However, when the thickness of the oil layer was smaller than the droplet diameter, the buckled droplets showed faster drying. Observation of the reflection images around the droplets suggested that the buckled droplets preferentially shrank in the height direction, while the droplets without buckling isotropically shrank. Mathematical models that assumed diffusion of dissolved water molecules in the oil layer showed good agreement with the experimental data. The effective water-oil interfacial area was constant in the buckled droplets, whereas it shrank in the droplets without buckling. This would be a reason for the faster drying of the partially immersed buckled droplets. Particulate shells on liquid droplets could be used to enhance droplet drying.

The role of microparticles on the shape and surface tension of static bubbles

HYPOTHESIS

Surface tension is a critical parameter in bubbles and foams, yet it is difficult to assess when microparticles are attached at the interface. By considering the interaction force between an air-liquid interface and microparticles, modified equations for sessile bubble tensiometry can be derived to determine the surface tension and shape of static microparticle-laden bubbles.

EXPERIMENTS

A modified sessile bubble method, in which the forces between microparticles and the air-liquid interface are considered, was developed and used to analyse the surface tension of bubbles fully coated by a monolayer of silica microparticles of different sizes. The results are compared to those obtained using classical sessile bubble tensiometry. The new method is also used to investigate the contours of particle-laden bubbles of varying particle radius and contact angle.

FINDINGS

While the classical sessile bubble method overestimates the surface tension, results obtained using the modified sessile bubble method show that the surface tension of static microparticle-laden bubbles remains the same as that of uncoated bubbles, with no dependency on the particle size. The discrepancy is due to the fact that microparticles attached to the air-liquid interface deform a bubble in a similar way that changes in surface tension do for uncoated bubbles.

Spontaneous particle desorption and "Gorgon" drop formation from particle-armored oil drops upon cooling

We study how the phenomenon of drop "self-shaping" (Denkov et al., Nature, 528, 2015, 392), in which oily emulsion drops undergo a spontaneous series of shape transformations upon emulsion cooling, is affected by the presence of adsorbed solid particles, like those used in Pickering emulsion stabilization. Experiments with several types of latex particles, and with added surfactant of low concentration to enable drop self-shaping, revealed several new unexpected phenomena: (1) adsorbed latex particles rearranged into regular hexagonal lattices upon freezing of the surfactant adsorption layer. (2) Spontaneous particle desorption from the drop surface was observed at a certain temperature - a remarkable phenomenon, as the solid particles are known to irreversibly adsorb on fluid interfaces. (3) Very strongly adhered particles to drop surfaces acted as a template to enable the formation of tens to hundreds of semi-liquid fibres, growing outwards from the drop surface, thus creating a shape resembling the Gorgon head from Greek mythology. Mechanistic explanations of all observed phenomena are provided using our understanding of the rotator phase formation on the surface of the cooled drops. The surface rotator phase creates positive line tension at the contact line formed between the particle surface and the fluid interface, which causes the particle ejection from the drop surface.

Colloids at Fluid Interfaces

Over the last two decades, understanding of the attachment of colloids to fluid interfaces has attracted the interest of researchers from different fields. This is explained by considering the ubiquity of colloidal and interfacial systems in nature and technology. However, to date, the control and tuning of the assembly of colloids at fluid interfaces remain a challenge. This review discusses some of the most fundamental aspects governing the organization of colloidal objects at fluid interfaces, paying special attention to spherical particles. This requires a description of different physicochemical aspects, from the driving force involved in the assembly to its thermodynamic description, and from the interactions involved in the assembly to the dynamics and rheological behavior of particle-laden interfaces.

Impact of Surface Amphiphilicity on the Interfacial Behavior of Janus Particle Layers under Compression

Langmuir monolayers of silica/gold Janus particles with two different degrees of amphiphilicity have been examined to study the significance of particle surface amphiphilicity on the structure and mechanical properties of the interfacial layers. The response of the layers to the applied compression provides insight into the nature and strength of the interparticle interactions. Different collapse modes observed for the interfacial layers are linked to the amphiphilicity of Janus particles and their configuration at the interface. Molecular dynamics simulations on nanoparticles with similar contact angles provide insight on the arrangement of particles at the interface and support our conclusion that the interfacial configuration and collapse of anisotropic particles at the air/water interface are controlled by particle amphiphilicity.