Tailoring the interfacial assembly of colloidal particles by engineering the mechanical properties of the interface

From theoretical aspects to practical food Pickering emulsions: Formation, stabilization, and complexities linked to the use of colloidal food particles

We noticed that in literature, the term Pickering emulsion (PE) is used as soon as ingredients contain particles, and in this review, we ask ourselves if that is done rightfully so. The basic behavior taking place in particle-stabilized emulsions leads to the conclusion that the desorption energy of particles is generally high making particles highly suited to physically stabilize emulsions. Exceptions are particles with extreme contact angles or systems with very low interfacial tension. Particles used in food and biobased applications are soft, can deform when adsorbed, and most probably have molecules extending into both phases thus increasing desorption energy. Besides, surface-active components will be present either in the ingredients or generated by the emulsification process used, which will reduce the energy of desorption, either by reduced interfacial tension, or changes in the contact angle. In this paper, we describe the relative relevance of these aspects, and how to distinguish them in practice. Practical food emulsions may derive part of their stability from the presence of particles, but most likely have mixed interfaces, and are thus not PEs. Especially when small particles are used to stabilize (sub)micrometer droplets, emulsions may become unstable upon receiving a heat treatment. Stability can be enhanced by connecting the particles or creating network that spans the product, albeit this goes beyond classical Pickering stabilization. Through the architecture of PEs, special functionalities can be created, such as reduction of lipid oxidation, and controlled release features.

Advances in Nanoarchitectonics: A Review of "Static" and "Dynamic" Particle Assembly Methods

Particle assembly is a promising technique to create functional materials and devices from nanoscale building blocks. However, the control of particle arrangement and orientation is challenging and requires careful design of the assembly methods and conditions. In this study, the static and dynamic methods of particle assembly are reviewed, focusing on their applications in biomaterial sciences. Static methods rely on the equilibrium interactions between particles and substrates, such as electrostatic, magnetic, or capillary forces. Dynamic methods can be associated with the application of external stimuli, such as electric fields, magnetic fields, light, or sound, to manipulate the particles in a non-equilibrium state. This study discusses the advantages and limitations of such methods as well as nanoarchitectonic principles that guide the formation of desired structures and functions. It also highlights some examples of biomaterials and devices that have been fabricated by particle assembly, such as biosensors, drug delivery systems, tissue engineering scaffolds, and artificial organs. It concludes by outlining the future challenges and opportunities of particle assembly for biomaterial sciences. This review stands as a crucial guide for scholars and professionals in the field, fostering further investigation and innovation. It also highlights the necessity for continuous research to refine these methodologies and devise more efficient techniques for nanomaterial synthesis. The potential ramifications on healthcare and technology are substantial, with implications for drug delivery systems, diagnostic tools, disease treatments, energy storage, environmental science, and electronics.

Ejected microcrystals probe jammed states of droplets in cyclodextrin-based emulsions

The cyclodextrin (CD)-based emulsions exhibit complex instability behaviors such as rapid flocculation and creaming, and how to capture droplet dispersion states of the emulsions remains a great challenge. Here we prepare the CD-based emulsions with different oil-water volume ratios and CD concentrations by using high-pressure homogenization, and characterize the emulsion droplets by using optical microscopy and confocal laser scanning microscopy. We evaluate the effects of homogenization pressure on the stability of the emulsions, identify armored droplets with different surface features, measure interfacial concentrations of adsorbed ICs microcrystals, and observe ejection of the oil/CD inclusion complexes (ICs) microcrystals from the droplet surface. The droplet dispersion states are sensitive to the dynamic buildup and evolving morphologies of the interfacial microcrystals, and there are clear correlations between the properties of the ejected microcrystals and the characteristics of the emulsions. We ascribe the subsequent ejection of ICs microcrystals from the droplet surface to consolidation and deformation of the films formed between neighboring droplets. The ejection of the ICs microcrystals affords a simple method to detect the droplet-droplet interactions and phase transitions in the CD-based emulsions, which might be a generic feature in the broader context of the creaming processes of emulsions.

Model aggregated 2D suspensions in shear and compression: From a fluid layer to an auxetic interface?

HYPOTHESIS

Particle-laden interfaces play a crucial role in engineering stability of multiphase systems. However, a full understanding of the mechanical properties in shear and compression, especially in relation to the underlying microstructural changes, is as yet lacking. In this study, we investigate the interfacial rheological moduli in heterogeneous networks of aggregated 2D suspensions using different deformation modes and relate these moduli to changes in the microstructure.

EXPERIMENTS

Interfacial rheological experiments were conducted at different surface coverages and clean kinematic conditions, namely in (i) simple shear flow in a modified double wall-ring geometry and (ii) isotropic compression in a custom-built radial trough, while monitoring the evolution of the microstructure.

FINDINGS

The compressive moduli increase non-monotonically with decreasing void fraction, reflecting the combined effect of aggregate densification and reduction of void structures, with rotation of rigid clusters playing a significant role in closing voids. However, the shear moduli increase monotonically, which correlates with the increase in fractal dimension of the aggregates making up the backbone network. We also observe that these interfaces act as 2D auxetic materials at intermediate coverages, which is surprising given their amorphous structure. This finding has potential implications for the resilience of particle-coated bubbles or droplets subjected to time-varying compression-expansion deformations.

Differences between surfactant-free Au@Ag and CTAB-stabilized Au@Ag star-like nanoparticles in the preparation of nanoarrays to improve their surface-enhanced Raman scattering (SERS) performance

In this study, we assessed the controlled synthesis and efficacy of surface-enhanced Raman scattering (SERS) on two distinct types of star-like Au@Ag core-shell nanoarrays. These nanoarrays were designed based on gold nanostars (AuNSs), which were synthesized with and without CTAB surfactant (AuNSs-CTAB and AuNSs-FS, respectively). The AuNS-FS nanoparticles were synthesized via a novel modification process, which helped overcome the previous limitations in the free-surfactant preparation of AuNSs by significantly increasing the number of branches, increasing the sharpness of the branches and minimizing the adsorption of the surfactant on the surface of AuNSs. Furthermore, the differences in the size and morphology of these AuNSs in the created nanoarrays were studied. To create the nanoarrays, a three-step method was employed, which involved the controlled synthesis of gold nanostars, covering them with a silver layer (AuNSs-FS@Ag and AuNSs-CTAB@Ag), and finally self-assembling the AuNS@Ag core-shelled nanoparticles via the liquid/liquid self-assembly method. AuNSs-FS@Ag showed higher ability in forming self-assembled nanoarrays than the nanoparticles prepared using CTAB, which can be attributed to the decrease in the repulsion between the nanoparticles at the interface. The nano-substrates developed with AuNSs-FS@Ag possessed numerous "hot spots" on their surface, resulting in a highly effective SERS performance. AuNSs-FS featured a significantly higher number of sharp branches than AuNSs-CTAB, making it the better choice for creating nanoarrays. It is worth mentioning that AuNSs-CTAB did not exhibit the same benefits as AuNSs-FS. The morphology of AuNSs with numerous branches was formed by controlling the seed boiling temperature and adding a specific amount of silver ions. To compare the SERS activity between the as-prepared nano-substrates, i.e., AuNS-CTAB@Ag and AuNS-FS@Ag self-assembled nanoarrays, low concentrations of crystal violet aqueous solution were characterized. The results showed that the developed AuNSs-FS@Ag could detect CV at trace concentrations ranging from 1.0 ng mL-1 to 10 ng mL-1 with a limit of detection (LOD) of 0.45 ng mL-1 and limit of quantification (LOQ) of 1.38 ng mL-1. The nano-substrates remained stable for 42 days with a decrease in the intensity of the characteristic Raman peaks of CV by less than 7.0% after storage. Furthermore, the spiking method could detect trace amounts of CV in natural water from the Dong Nai River with concentrations as low as 1 to 100 ng mL-1, with an LOD of 6.07 ng mL-1 and LOQ of 18.4 ng mL-1. This method also displayed good reproducibility with an RSD value of 5.71%. To better understand the impact of CTAB stabilization of the Au@Ag star-like nanoparticles on their surface-enhanced Raman scattering (SERS) performance, we conducted density functional theory (DFT) calculations. Our research showed that the preparation of AuNSs-FS@Ag via self-assembly is an efficient, simple, and fast process, which can be easily performed in any laboratory. Furthermore, the research and development results presented herein on nanoarrays have potential application in analyzing and determining trace amounts of organic compounds in textile dyeing wastewater.

Synthetic and biopolymeric microgels: Review of similarities and difference in behaviour in bulk phases and at interfaces

This review discusses the current knowledge of interfacial and bulk interactions of biopolymeric microgels in relation to the well-established properties of synthetic microgels for applications as viscosity modifiers and Pickering stabilisers. We present a timeline showing the key milestones in designing microgels and their bulk/ interfacial performance. Poly(N-isopropylacrylamide) (pNIPAM) microgels have remained as the protagonist in the synthetic microgel domain whilst proteins or polysaccharides have been primarily used to fabricate biopolymeric microgels. Bulk properties of microgel dispersions are dominated by the volume fraction (ϕ) of the microgel particles, but ϕ is difficult to pinpoint, as addressed by many theoretical models. By evaluating recent experimental studies over the last five years, we find an increasing focus on the analysis of microgel elasticity as a key parameter in modulating their packing at the interfaces, within the provinces of both synthetic and biopolymeric systems. Production methods and physiochemical factors shown to influence microgel swelling in the aqueous phase can have a significant impact on their bulk as well as interfacial performance. Compared to synthetic microgels, biopolymer microgels show a greater tendency for polydispersity and aggregation and do not appear to have a core-corona structure. Comprehensive studies of biopolymeric microgels are still lacking, for example, to accurately determine their inter- and intra- particle interactions, whilst a wider variety of techniques need to be applied in order to allow comparisons to real systems of practical usage.

Nanoscale Porosity in Microellipsoids Cloaks Interparticle Capillary Attraction at Fluid Interfaces

Anisotropic particles pinned at fluid interfaces tend toward disordered multiparticle configurations due to large, orientationally dependent, capillary forces, which is a significant barrier to exploiting these particles to create functional self-assembled materials. Therefore, current interfacial assembly methods typically focus on isotropic spheres, which have minimal capillary attraction and no dependence on orientation in the plane of the interface. In order to create long-range ordered structures with complex configurations via interfacially trapped anisotropic particles, control over the interparticle interaction energy via external fields and/or particle engineering is necessary. Here, we synthesize colloidal ellipsoids with nanoscale porosity and show that their interparticle capillary attraction at a water-air interface is reduced by an order of magnitude compared to their smooth counterparts. This is accomplished by comparing the behavior of smooth, rough, and porous ellipsoids at a water-air interface. By monitoring the dynamics of two particles approaching one another, we show that the porous particles exhibit a much shorter-range capillary interaction potential, with scaling intriguingly different than theory describing the behavior of smooth ellipsoids. Further, interferometry measurements of the fluid deformation surrounding a single particle shows that the interface around porous ellipsoids does not possess the characteristic quadrupolar symmetry of smooth ellipsoids, and quantitatively confirms the decrease in capillary interaction energy. By engineering nanostructured surface features in this fashion, the interfacial capillary interactions between particles may be controlled, informing an approach for the self-assembly of complex two-dimensional microstructures composed of anisotropic particles.

Jamming to unjamming: Phase transition in cyclodextrin-based emulsions mediated by sodium casein

HYPOTHESIS

Cyclodextrin (CD) can spontaneously build up the solid particle membrane with CD-oil inclusion complexes (ICs) by a self-assembly process. Sodium casein (SC) is expected to preferentially adsorb at the interface to transform the type of interfacial film. The high-pressure homogenization can increase interfacial contact opportunities of the components, which promote the phase transition of the interfacial film.

EXPERIMENTS

We added SC by sequential and simultaneous orders to mediate the assembly model of the CD-based films, examined the patterns in which the films adopt phase transitions to retard emulsion flocculation, and studied the physic-chemical properties of the emulsions and films from the structural arrest, interface tension, interfacial rheology, linear rheology, and nonlinear viscoelasticities through Fourier transform (FT)-rheology and Lissajous-Bowditch plots.

FINDINGS

The interfacial and large amplitude oscillatory shear (LAOS) rheological results showed that the films changed from jammed to unjammed. We divide the unjammed films into two types: one is SC dominated liquid-like film, which is fragile and related to droplet coalescence; the other is cohesive SC-CD film, which helps droplet rearrangement and retards droplet flocculation. Our results highlight the potential of mediating phase transformation of interfacial films to improve emulsion stability.

Forces Controlling the Assembly of Particles at Fluid Interfaces

The interaction of particles with fluid interfaces is ubiquitous in synthetic and natural work, involving two types of interactions: particle-interface interactions (trapping energy) and interparticle interactions. Therefore, it is urgent to gain a deep understanding of the main forces controlling the trapping of particles at fluid interfaces, and their assembly to generate a broad range of structures characterized by different degrees of order. This Perspective tries to provide an overview of the main contributions to the energetic landscape controlling the assembly of particles at fluid interfaces, which is essential for exploiting this type of interfacial systems as platforms for the fabrication of interface-based soft materials with technological interest.

Effects of Interfacial Shear on Particle Aggregation at an Oil/Water Interface

Using a Stokesian dynamics simulation, the microstructure of particle aggregates at an oil/water interface with an applied Couette flow is studied. The results of the aggregation are consistent with previously published experimental work demonstrating multiple regimes of behavior based on the relative strength of shear and capillary forces. In previous work, densification of aggregates at low shear rates was theorized to occur due to short time scale fragmentation/reaggregation of aggregates with rigid particle bonds. In simulations, densification is observed at low shear rates but occurs due to local reorganization of particles due to capillary torques over long time scales. Moderate shear rates create mobile bonds between particles at shorter time scales, allowing aggregates to fragment without reaggregation into smaller isolated clusters, consistent with prior experimental work. At the highest shear rates, aggregation is inhibited completely.

Evaluating the Impact of Hydrophobic Silicon Dioxide in the Interfacial Properties of Lung Surfactant Films

The interaction of hydrophobic silicon dioxide particles (fumed silicon dioxide), as model air pollutants, and Langmuir monolayers of a porcine lung surfactant extract has been studied in order to try to shed light on the physicochemical bases underlying the potential adverse effects associated with pollutant inhalation. The surface pressure-area isotherms of lung surfactant (LS) films including increasing amounts of particles revealed that particle incorporation into LS monolayers modifies the organization of the molecules at the water/vapor interface, which alters the mechanical resistance of the interfacial films, hindering the ability of LS layers for reducing the surface tension, and reestablishing the interface upon compression. This influences the normal physiological function of LS as is inferred from the analysis of the response of the Langmuir films upon the incorporation of particles against harmonic changes of the interfacial area (successive compression-expansion cycles). These experiments evidenced that particles alter the relaxation mechanisms of LS films, which may be correlated to a modification of the transport of material within the interface and between the interface and the adjacent fluid during the respiratory cycle.

Rotating Micro-Spheres for adsorption monitoring at a fluid interface

HYPOTHESIS

A broad range of phenomena, such as emulsification and emulsion stability, foam formation or liquid evaporation, are closely related to the dynamics of adsorbing colloidal particles. Elucidation of the mechanisms implied is key to a correct design of many different types of materials.

EXPERIMENTS

Microspheres forced to rotate near a fluid interface exhibit a roto-translational hydrodynamic mechanism that is hindered by capillary torques as soon as the particles protrude the interface. Under these conditions, the time evolution in the ratio of moving spheres provides a direct description of the adsorption kinetics, while microscopy monitoring of particle acceleration\deceleration informs about the adsorption\desorption dynamics. In this work, the proposed strategy is applied at an air/water interface loaded with spherical magnetic particles negatively charged, forced to rotate by the action of a rotating magnetic field.

FINDINGS

The proposed method enables the adsorption/desorption dynamics to be followed during the earliest phase of the process, when desorption of a small fraction of particles is detected, as well as to estimate approximated values of the adsorption/desorption constants. The results obtained show that the addition of a monovalent salt or a cationic (anionic) surfactant promotes (inhibits) both adsorption and formation of permanent bonds between particles.

Adsorption of soft NIPAM nanogels at hydrophobic and hydrophilic interfaces: Conformation of the interfacial layers determined by neutron reflectivity

The application of stimuli-responsive microgels and nanogels in drug delivery, catalysis, sensing, and coatings is restricted currently by the limited understanding of the factors influencing their adsorption dynamics and structural changes at interfaces. We have used neutron reflectivity to resolve, on the Ångström scale, the structure of 5% crosslinked N-isopropylacrylamide nanogels at both hydrophobic and hydrophilic interfaces in situ, as a function of temperature and bulk nanogel concentration. Our results show that the higher flexibility given by the low crosslinker content allows for a more ordered structure and packing. The adsorption of the thermoresponsive nanogels is primarily driven by temperature, more specifically its proximity to its volume phase transition temperature, while concentration plays a secondary role. Hydrophobic interactions drive the conformation of the first layer at the interface, which plays a key role in influencing the overall nanogel structure. The mobility of the first layer at the air-water interface as opposed to the interfacial confinement at the solid (SiC8)-liquid interface, results in a different conformation, a more compact and less deformed packing structure, which ultimately drives the structure of the subsequent layers. The evidence for the different structural conformations determined by the degree of hydrophobicity of the interface provides new knowledge, which is essential for the development of further applications. The key role of hydrophobic interactions in driving adsorption and interfacial behavior was also confirmed by fluid AFM experiments which visualized adherence of the nanogels to SiC8 modified surfaces.

Droplet Dispersion States of Cyclodextrin-Based Emulsions from Nonlinear Rheological Properties

Polymers are desirable to improve emulsion stability by stuffing them into the continuous phase. How to get information on the droplet dispersion states of the emulsions remains a challenge, as the emulsion characteristics are dictated by two intertwining components, the polymer matrix and the droplets. Herein, we use an amphiphilic polymer, gum arabic (GA), to mediate the droplet flocculation of cyclodextrin (CD)-based emulsions and compare them with our previous studies on the stabilization of CD-based emulsions by a nonamphiphilic polymer, methylcellulose (MC). We characterize the emulsions by using optical microscopy, confocal laser scanning microscopy, and laser particle analysis, explore their rheological behavior through large-amplitude oscillatory shear experiments, and analyze the nonlinear viscoelasticities through Fourier transform (FT)-rheology and Lissajous-Bowditch plots. There is a great difference between GA and MC in the viscosity effect and the arrangement around emulsion droplets. GA is not an effective flocculation inhibitor due to a bridging flocculation mechanism rather than a direct viscosity effect. Our analysis highlights the role of the intrinsic nonlinearity parameter (Q₀) extracted by FT analysis in reflecting the droplet dispersion states of the emulsions by decoupling structural contributions from the polymers and the emulsion droplets.

A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Particles adsorbed to fluid interfaces are ubiquitous in industry, nature or life. The wide range of properties arising from the assembly of particles at fluid interface has stimulated an intense research activity on shed light to the most fundamental physico-chemical aspects of these systems. These include the mechanisms driving the equilibration of the interfacial layers, trapping energy, specific inter-particle interactions and the response of the particle-laden interface to mechanical perturbations and flows. The understanding of the physico-chemistry of particle-laden interfaces becomes essential for taking advantage of the particle capacity to stabilize interfaces for the preparation of different dispersed systems (emulsions, foams or colloidosomes) and the fabrication of new reconfigurable interface-dominated devices. This review presents a detailed overview of the physico-chemical aspects that determine the behavior of particles trapped at fluid interfaces. This has been combined with some examples of real and potential applications of these systems in technological and industrial fields. It is expected that this information can provide a general perspective of the topic that can be exploited for researchers and technologist non-specialized in the study of particle-laden interfaces, or for experienced researcher seeking new questions to solve.

Soft Colloidal Particles at Fluid Interfaces

The assembly of soft colloidal particles at fluid interfaces is reviewed in the present paper, with emphasis on the particular case of microgels formed by cross-linked polymer networks. The dual polymer/colloid character as well as the stimulus responsiveness of microgel particles pose a challenge in their experimental characterization and theoretical description when adsorbed to fluid interfaces. This has led to a controversial and, in some cases, contradictory picture that cannot be rationalized by considering microgels as simple colloids. Therefore, it is necessary to take into consideration the microgel polymer/colloid duality for a physically reliable description of the behavior of the microgel-laden interface. In fact, different aspects related to the above-mentioned duality control the organization of microgels at the fluid interface, and the properties and responsiveness of the obtained microgel-laden interfaces. This works present a critical revision of different physicochemical aspects involving the behavior of individual microgels confined at fluid interfaces, as well as the collective behaviors emerging in dense microgel assemblies.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

Influence of the interfacial tension on the microstructural and mechanical properties of microgels at fluid interfaces

Microgels are soft colloidal particles constituted by cross-linked polymer networks with a high potential for applications. In particular, after adsorption at a fluid interface, interfacial tension provides two-dimensional (2D) confinement for microgel monolayers and drives the reconfiguration of the particles, enabling their deployment in foam and emulsion stabilization and in surface patterning for lithography, sensing and optical materials. However, most studies focus on systems of fluids with a high interfacial tension, e.g. alkanes/ or air/water interfaces, which imparts similar properties to the assembled monolayers. Here, instead, we compare two organic fluid phases, hexane and methyl tert-butyl ether, which have markedly different interfacial tension (γ) values with water and thus tune the deformation of adsorbed microgels. We rationalize how γ controls the single-particle morphology, which consequently modulates the structural and mechanical response of the monolayers at varying interfacial compression. Specifically, when γ is low, the microgels are less deformed within the interface plane and their polymer networks can rearrange more easily upon lateral compression, leading to softer monolayers. Selecting interfaces with different surface energy offers an additional control to customize the 2D assembly of soft particles, from the fine-tuning of particle size and interparticle spacing to the tailoring of mechanical properties.

Geometric Frustration and Long-Range Ordering Induced by Surface Pressure Oscillation in a Langmuir-Blodgett Monolayer of Magnetic Soft Spheres

As a step toward the bottom-up construction of magnonic systems, this paper demonstrates the use of a large-amplitude surface-pressure annealing technique to generate 2-D order in a Langmuir-Blodgett monolayer of magnetic soft spheres comprising a surfactant-encapsulated polyoxometalate. The films show a distorted square lattice interpreted as due to geometric frustration caused by 2-D confinement between soft walls, one being the air interface and the other the aqueous subphase. Hysteresis and relaxation phenomena in the 2-D layers are suggested to be due to folding and time-dependent interpenetration of surfactant chains.

In situ determination of the structure and composition of Langmuir monolayers at the air/water interface by neutron and X-ray reflectivity and ellipsometry

This review focuses on the description of the structure and composition of a variety of Langmuir monolayers (LMs) deposited at the air/water interface by using ellipsometry, Brewster Angle microscopy and scattering techniques, mainly neutron and X-ray reflectometry. Since the first experiment done by Angels Pockels with a homemade trough in her home kitchen until today, LMs of different materials have been extensively studied providing not only relevant model systems in biology, physics and chemistry but also precursors of novel materials via their deposition on solid substrates. There is a vast amount of surface-active materials that can form LMs and, therefore, far from a revision of the state-of-the-art, we will emphasize here: (i) some fundamental aspects to understand the physics behind the molecular deposition at the air/water interface; (ii) the advantages in using in situ techniques, such as reflectometry or ellipsometry, to resolve the interfacial architecture and conformation of molecular films; and, finally, (iii) a summary of several systems that have certain interest from the experimental or conceptual point of view. Concretely, we will report here advances in polymers confined to interfaces and surfactants, from fatty acids and phospholipids monolayers to more unconventional ones such as graphene oxide.

Particle-laden fluid/fluid interfaces: physico-chemical foundations

Particle-laden fluid/fluid interfaces are ubiquitous in academia and industry, which has fostered extensive research efforts trying to disentangle the physico-chemical bases underlying the trapping of particles to fluid/fluid interfaces as well as the properties of the obtained layers. The understanding of such aspects is essential for exploiting the ability of particles on the stabilization of fluid/fluid interface for the fabrication of novel interface-dominated devices, ranging from traditional Pickering emulsions to more advanced reconfigurable devices. This review tries to provide a general perspective of the physico-chemical aspects associated with the stabilization of interfaces by colloidal particles, mainly chemical isotropic spherical colloids. Furthermore, some aspects related to the exploitation of particle-laden fluid/fluid interfaces on the stabilization of emulsions and foams will be also highlighted. It is expected that this review can be used for researchers and technologist as an initial approach to the study of particle-laden fluid layers.

Janus Particles at Fluid Interfaces: Stability and Interfacial Rheology

The use of the Janus motif in colloidal particles, i.e., anisotropic surface properties on opposite faces, has gained significant attention in the bottom-up assembly of novel functional structures, design of active nanomotors, biological sensing and imaging, and polymer blend compatibilization. This review is focused on the behavior of Janus particles in interfacial systems, such as particle-stabilized (i.e., Pickering) emulsions and foams, where stabilization is achieved through the binding of particles to fluid interfaces. In many such applications, the interface could be subjected to deformations, producing compression and shear stresses. Besides the physicochemical properties of the particle, their behavior under flow will also impact the performance of the resulting system. This review article provides a synopsis of interfacial stability and rheology in particle-laden interfaces to highlight the role of the Janus motif, and how particle anisotropy affects interfacial mechanics.

Marangoni Effect-Driven Transfer and Compression at Three-Phase Interfaces for Highly Reproducible Nanoparticle Monolayers

Interfacial self-assembly is a powerful technology for preparing large scale nanoparticle monolayers, but fabrication of highly repeatable large scale nanoparticle monolayers remains a challenge. Here we develop an oil/water/oil (O/W/O) three-phase system based on the Marangoni effect to fabricate highly reproducible nanoparticle monolayers. Nanoparticles could be easily transferred and compressed from the lower O/W interface to the upper O/W interface due to the interfacial tension gradient. The O/W/O system can be constructed using different kinds of organic solvents. Through this approach, good uniformity and reproducibility of the nanoparticle monolayers could be guaranteed even using a wide range of nanoparticle concentrations. Furthermore, this strategy is generally applicable to various nanoparticles with different sizes, shapes, components, and surface ligands, which offers a facile and general approach to functional nanodevices.

Shape Deformation in Ion Beam Irradiated Colloidal Monolayers: An AFM Investigation

Self-assembly of colloidal monolayers represents a prominent approach to the fabrication of nanostructures. The modification of the shape of colloidal particles is essential in order to enrich the variety of attainable patterns which would be limited by the typical assembly of spherical particles in a hexagonal arrangement. Polymer particles are particularly promising in this sense. In this article, we investigate the deformation of closely-packed polystyrene particles under MeV oxygen ion irradiation at normal incidence using atomic force microscopy (AFM). By developing a procedure based on the fitting of particle topography with quadrics, we reveal a scenario of deformation more complex than the one observed in previous studies for silica particles, where several phenomena, including ion hammering, sputtering, chemical modifications, can intervene in determining the final shape due to the specific irradiation conditions. In particular, deformation into an ellipsoidal shape is accompanied by shrinkage and polymer redistribution with the presence of necks between particles for increasing ion fluence. In addition to casting light on particle irradiation in a regime not yet explored, we present an effective method for the characterization of the colloidal particle morphology which can be applied to describe and understand particle deformation in other regimes of irradiation or with different techniques.

Colloids at Fluid Interfaces

Over the last two decades, understanding of the attachment of colloids to fluid interfaces has attracted the interest of researchers from different fields. This is explained by considering the ubiquity of colloidal and interfacial systems in nature and technology. However, to date, the control and tuning of the assembly of colloids at fluid interfaces remain a challenge. This review discusses some of the most fundamental aspects governing the organization of colloidal objects at fluid interfaces, paying special attention to spherical particles. This requires a description of different physicochemical aspects, from the driving force involved in the assembly to its thermodynamic description, and from the interactions involved in the assembly to the dynamics and rheological behavior of particle-laden interfaces.

Interactions between nanoparticles in nanosuspension

Nanoparticles are particles with a characteristic dimension below 100 nm. The properties of nanoparticles differ substantially from those of "big" colloidal particles (size bigger than 1 μm) because radius of surface forces, which is around 100 nm, is greater than or comparable with the nanoparticles size. The latter means that each nanoparticle could be completely covered by the surface forces of the neighbouring particles at small enough separation. It also means that the well-known Derjaguin approximation cannot be applied directly and some modifications are required. Pairwise interaction between nanoparticles can be used only at an extremely low volume fraction of nanoparticles (below some critical volume fraction, which is ~0.02%), and above this concentration a new theory based on many-particle interactions should be applied, which is yet to be developed. Some recent progress in the area of interaction between nanoparticles is reviewed and the properties of nanosuspensions based on interaction between nanoparticles are described. The authors have not attempted to cover all available literature in the area but instead have tried to underline the fundamental problems in the area which need to be addressed.