Recent advances in biodegradable matrices for active ingredient release in crop protection: Towards attaining sustainability in agriculture

Biopolymers as Seed-Coating Agent to Enhance Microbially Induced Tolerance of Barley to Phytopathogens

Infections of agricultural crops caused by pathogen ic fungi are among the most widespread and harmful, as they not only reduce the quantity of the harvest but also significantly deteriorate its quality. This study aims to develop unique seed-coating formulations incorporating biopolymers (polyhydroxyalkanoate and pullulan) and beneficial microorganisms for plant protection against phytopathogens. A microbial association of biocompatible endophytic bacteria has been created, including Pseudomonas flavescens D5, Bacillus aerophilus A2, Serratia proteamaculans B5, and Pseudomonas putida D7. These strains exhibited agronomically valuable properties: synthesis of the phytohormone IAA (from 45.2 to 69.2 µg mL-1), antagonistic activity against Fusarium oxysporum and Fusarium solani (growth inhibition zones from 1.8 to 3.0 cm), halotolerance (5-15% NaCl), and PHA production (2.77-4.54 g L-1). A pullulan synthesized by Aureobasidium pullulans C7 showed a low viscosity rate (from 395 Pa·s to 598 Pa·s) depending on the concentration of polysaccharide solutions. Therefore, at 8.0%, w/v concentration, viscosity virtually remained unchanged with increasing shear rate, indicating that it exhibits Newtonian flow behavior. The effectiveness of various antifungal seed coating formulations has been demonstrated to enhance the tolerance of barley plants to phytopathogens.

Synthesis, biological evaluation and molecular docking of novel nereistoxin derivatives containing phosphonates as insecticidal/AChE inhibitory agents

In continuation of our program aimed at the discovery and development of natural product-based insecticidal agents, a series of novel nereistoxin derivatives containing phosphonate were synthesized and characterized by 31P, 1H, 13C NMR and HRMS. The bioactivities of the derivatives were evaluated for the acetylcholinesterase (AChE) inhibition potency and insecticidal activity. The AChE inhibitory effects of the derivatives were investigated using the in vitro Ellman method. Half of the compounds exhibited excellent inhibition of AChE. All the compounds were assessed for insecticidal activities against Mythimna separate (Walker) and Rhopalosiphum padi in vivo. Some derivatives displayed promising insecticidal activity against Rhopalosiphum padi. Compounds 5b and 6a displayed the highest activity against R. padi, showing LC50 values of 17.14 and 18.28 μg mL-1, respectively, close to that of commercial insecticide flunicotamid (LC50 = 17.13 μg mL-1). Compound 9g also showed notable insecticidal activity, with an LC50 value of 23.98 μg mL-1. Additionally, the binding modes of the active compounds 5b, 6a and 9g with AChE were analyzed in-depth though molecular docking and the intrinsic reasons for the differences in the strength of the compound's activities were elucidated. In summary, our findings demonstrate the potential of these nereistoxin derivatives as promising candidates for the development of novel pesticides.

Encapsulated nanopesticides application in plant protection: Quo vadis?

The increased global food insecurity due to the growing population can be addressed with precision and sustainable agricultural practices. To tackle the issues regarding food insecurity, farmers used different agrochemicals that improved plant growth and protection. Among these agrochemicals, synthetic pesticides used for plant protection in the agricultural field have various disadvantages. Conventional applications of synthetic pesticides have drawbacks such as rapid degradation, poor solubility, and non-target effects, as well as increased pesticide runoff that pollutes the environment. Nanotechnology has evolved as a potential solution to increase agricultural productivity through the development of different nanoforms of agrochemicals such as nanopesticides, nano-fabricated fertilizers, nanocapsules, nanospheres, nanogels, nanofibers, nanomicelles, and nano-based growth promoters. Encapsulation of these pesticides inside the nanomaterials has provided good biocompatibility over conventional application by inhibiting the early degradation of active ingredients (AI), increasing the uptake and adhesion of pesticides, improving the stability, solubility, and permeability of the pesticides, and decreasing the environmental impacts due to the pesticide runoff. In this review, different nanoforms of encapsulated pesticides and their smart delivery systems; nanocarriers in RNA interference (RNAi) based pesticides; environmental fate, practical implications, management of nanopesticides; and future perspectives are discussed.

Cellulose Nanocrystal-Based Emulsion of Thyme Essential Oil: Preparation and Characterisation as Sustainable Crop Protection Tool

Essential oil-based pesticides, which contain antimicrobial and antioxidant molecules, have potential for use in sustainable agriculture. However, these compounds have limitations such as volatility, poor water solubility, and phytotoxicity. Nanoencapsulation, through processes like micro- and nanoemulsions, can enhance the stability and bioactivity of essential oils. In this study, thyme essential oil from supercritical carbon dioxide extraction was selected as a sustainable antimicrobial tool and nanoencapsulated in an oil-in-water emulsion system. The investigated protocol provided high-speed homogenisation in the presence of cellulose nanocrystals as stabilisers and calcium chloride as an ionic crosslinking agent. Thyme essential oil was characterised via GC-MS and UV-vis analysis, indicating rich content in phenols. The cellulose nanocrystal/essential oil ratio and calcium chloride concentration were varied to tune the nanoemulsions' physical-chemical stability, which was investigated via UV-vis, direct observation, dynamic light scattering, and Turbiscan analysis. Transmission electron microscopy confirmed the nanosized droplet formation. The nanoemulsion resulting from the addition of crosslinked nanocrystals was very stable over time at room temperature. It was evaluated for the first time on Pseudomonas savastanoi pv. savastanoi, the causal agent of olive knot disease. In vitro tests showed a synergistic effect of the formulation components, and in vivo tests on olive seedlings demonstrated reduced bacterial colonies without any phytotoxic effect. These findings suggest that crosslinked cellulose nanocrystal emulsions can enhance the stability and bioactivity of thyme essential oil, providing a new tool for crop protection.

Dynamic interplay between nano-enabled agrochemicals and the plant-associated microbiome

The plant-associated microbiome is known to be a critical component for crop growth, nutrient acquisition, resistance to pathogens, and abiotic stress tolerance. Conventional approaches have been attempted to manipulate the plant-soil microbiome to improve plant performance; however, several issues have arisen, such as collateral negative impacts on microbiota composition. The lack of reliability and robustness of conventional techniques warrants efforts to develop novel alternative strategies. Nano-enabled approaches have emerged as promising platforms for enhancing agricultural sustainability and global food security. Specifically, the use of engineered nanomaterials (ENMs) as nanoscale agrochemicals has great potential to modulate the plant-associated microbiome. We review the dynamic interplay between nano-agrochemicals and the plant-associated microbiome for the safe development and use of nano-enabled microbiome engineering.

Unleashing the potential of nanoparticles on seed treatment and enhancement for sustainable farming

The foremost challenge in farming is the storage of seeds after harvest and maintaining seed quality during storage. In agriculture, studies showed positive impacts of nanotechnology on plant development, seed storage, endurance under various types of stress, detection of seed damages, and seed quality. Seed's response varies with different types of nanoparticles depending on its physical and biochemical properties and plant species. Herein, we aim to cover the impact of nanoparticles on seed coating, dormancy, germination, seedling, nutrition, plant growth, stress conditions protection, and storage. Although the seed treatment by nanopriming has been shown to improve seed germination, seedling development, stress tolerance, and seedling growth, their full potential was not realized at the field level. Sustainable nano-agrochemicals and technology could provide good seed quality with less environmental toxicity. The present review critically discusses eco-friendly strategies that can be employed for the nanomaterial seed treatment and seed enhancement process to increase seedling vigor under different conditions. Also, an integrated approach involving four innovative concepts, namely green co-priming, nano-recycling of agricultural wastes, nano-pairing, and customized nanocontainer storage, has been proposed to acclimatize nanotechnology in farming.

Tannic Acid Interfacial Modification of Prochloraz Ethyl Cellulose Nanoparticles for Enhancing the Antimicrobial Effect and Biosafety of Fungicides

With the poorly soluble and intrinsically unstable feature, prochloraz (Pro) was confronted with lower bioavailability in the crop defense against fungal erosion. Therefore, it was a challenging project to explore the innovative antifungal compound delivery system for improving bioavailability. The superior adhesive fungicide formulation was supposed to be an efficient pathway to enhance transmembrane permeability and biological activity. According to abundant phenolic hydroxyl groups, tannic acid (TA) was an ideal modified adhesive biomaterial to improve interfacial interactions. The fundamental purpose of this research was focused on the synergistic mechanism of TA-interfacial-modified Pro-ethyl cellulose (EC) nanoparticles for improving bioavailability and biosafety. In the stability test, TA-modified Pro-EC nanoparticles had the capacity to reduce Pro initial release burst, extending a persistent validity and improving anti-photodegradation property. The toxicity index of Pro-EC and Pro-EC-TA was approximately 2.93-fold and 4.96-fold that of Pro technical against Fusarium graminearum (F. graminearum), respectively. Compared with nonmodified EC nanoparticles, TA-modified EC nanoparticles obtained eminent transmembrane permeability and superior adherence ability to F. graminearum, for hydroxyl and carboxyl groups of TA to enhance interaction with target cell membranes. The contents of cellular reactive oxygen species induced by Pro-EC and Pro-EC-TA nanoparticles were about 2.31 times and 3.00 times that of the control check (CK), respectively. Compared to the CK group, the membrane potential and ergosterol values of F. graminearum treated with Pro-EC-TA nanoparticles were drastically reduced by 74.91 and 56.20%, respectively. In the biosafety assay, the maximum half-lethal concentration value of the TA-modified Pro-EC nanoparticles indicated that the acute toxicity of the Pro-EC-TA nanoparticles to adult zebrafish was approximately 8.34-fold reduced compared to that of the Pro technical. These findings demonstrated that the successful interfacial modification of Pro-EC nanoparticles with TA was a highly efficient, environmentally safe, and promising alternative for sustainable agricultural application, thus making the fungicide formulation process more simplified, easier fabrication, and lower cost.

Electrospun Fibers of Biocompatible and Biodegradable Polyesters, Poly(Ethylene Oxide) and Beeswax with Anti-Bacterial and Anti-Fungal Activities

Fibrous materials composed of core-sheath fibers from poly(ethylene oxide) (PEO), beeswax (BW) and 5-nitro-8-hydroxyquinoline (NQ) were prepared via the self-organization of PEO and BW during the single-spinneret electrospinning of a homogeneous blend solution of the partners. Additionally, the application of the same approach enabled the preparation of fibrous materials composed of core-double sheath fibers from PEO, poly(L-lactide) (PLA) and NQ or 5-chloro-7-iodo-8-hydroxyquinoline (CQ), as well as from PEO, poly(ε-caprolactone) (PCL) and NQ. The consecutive selective extraction of BW and of the polyester with hexane and tetrahydrofuran, respectively, evidenced that core-double sheath fibers from PEO/polyester/BW/drug consisted of a PEO core, a polyester inner sheath and a BW outer sheath. In order to evaluate the possibility of the application of fibrous materials from PEO/BW/NQ, PEO/PLA/BW/NQ, PEO/PCL/BW/NQ and PEO/PLA/BW/CQ for plant protection, microbiological studies were performed using both phytopathogenic microorganisms (Pseudomonas corrugata, Fusarium graminearum and Fusarium avenaceum) and beneficial microorganisms (Pseudomonas chlororaphis, Bacillus amyloliquefaciens and Trichoderma asperellum). It was found that the fibrous materials had anti-bacterial and anti-fungal activity against both phytopathogenic and beneficial microorganisms. This is the first report on the activity of fibrous materials loaded with 8-hydroxyquinoline derivatives not only against phytopathogenic but also against beneficial microorganisms that are of importance in agriculture.

New seed coating containing Trichoderma viride with anti-pathogenic properties

Background

To ensure food security in the face of climate change and the growing world population, multi-pronged measures should be taken. One promising approach uses plant growth-promoting fungi (PGPF), such as Trichoderma, to reduce the usage of agrochemicals and increase plant yield, stress tolerance, and nutritional value. However, large-scale applications of PGPF have been hampered by several constraints, and, consequently, usage on a large scale is still limited. Seed coating, a process that consists of covering seeds with low quantities of exogenous materials, is gaining attention as an efficient and feasible delivery system for PGPF.

Methods

We have designed a new seed coating composed of chitin, methylcellulose, and Trichoderma viride spores and assessed its effect on canola (Brassica napus L.) growth and development. For this purpose, we analyzed the antifungal activity of T. viride against common canola pathogenic fungi (Botrytis cinerea, Fusarium culmorum, and Colletotrichum sp.). Moreover, the effect of seed coating on germination ratio and seedling growth was evaluated. To verify the effect of seed coating on plant metabolism, we determined superoxide dismutase (SOD) activity and expression of the stress-related RSH (RelA/SpoT homologs).

Results

Our results showed that the T. viride strains used for seed coating significantly restricted the growth of all three pathogens, especially F. culmorum, for which the growth was inhibited by over 40%. Additionally, the new seed coating did not negatively affect the ability of the seeds to complete germination, increased seedling growth, and did not induce the plant stress response. To summarize, we have successfully developed a cost-effective and environmentally responsible seed coating, which will also be easy to exploit on an industrial scale.

Chitosan-based nanocomposites as coatings and packaging materials for the postharvest improvement of agricultural product: A review

The perishability nature of harvested fruits and vegetables, along with the effect of environmental factors, storage conditions, and transportation, reduce the products' quality and shelf-life. Considerable efforts have been allocated to alternate conventional coatings based on new edible biopolymers for packaging. Chitosan is an attractive alternative to synthetic plastic polymers due to its biodegradability, antimicrobial activity, and film-forming properties. However, its conservative properties can be improved by adding active compounds, limiting microbial agents' growth and biochemical and physical damages, and enhancing the stored products' quality, shelf-life, and consumer acceptability. Most of the research on chitosan-based coatings focuses on antimicrobial or antioxidant properties. Along with the advancement of polymer science and nanotechnology, novel chitosan blends with multiple functionalities are required and should be fabricated using numerous strategies, especially for application during storage. This review discusses recent developments in using chitosan as a matrix to fabricate bioactive edible coatings and their positive impacts on increasing the quality and shelf-life of fruits and vegetables.

Phosphate-modified cellulose/chitosan with high drug loading for effective prevention of rice leaffolder (Cnaphalocrocis medinalis) outbreaks in fields

The continuous infestation of pests has seriously affected rice growth, yield and quality. How to reduce the use of pesticides and effectively control insect pests is a bottleneck problem. Herein, based on hydrogen bonding and electrostatic interactions, we posed a novel strategy to construct emamectin benzoate (EB) pesticide loading system using self-assembled phosphate-modified cellulose microspheres (CMP) and chitosan (CS). CMP provides more binding sites for EB loading and CS coating further enhances the carrier loading capacity up to 50.75 %, which jointly imparted pesticide photostability and pH-responsiveness. The retention capacity of EB-CMP@CS in rice growth soil reached 101.56-fold that of commercial EB, which effectively improved the absorption of pesticides during rice development. During the pest outbreak, EB-CMP@CS achieved effective pest control by increasing the pesticide content in rice stems and leaves, the control efficiency of the rice leaffolder (Cnaphalocrocis medinalis) reached 14-fold that of commercial EB, and could maintain the effective pest control effect during the booting stage of rice. Finally, EB-CMP@CS-treated paddy fields had improved yields and were free of pesticide residues in the rice grain. Therefore, EB-CMP@CS achieves effective control of rice leaffolder in paddy fields and has potential application value in green agricultural production.

Recent Advances in Nano-Enabled Seed Treatment Strategies for Sustainable Agriculture: Challenges, Risk Assessment, and Future Perspectives

Agro seeds are vulnerable to environmental stressors, adversely affecting seed vigor, crop growth, and crop productivity. Different agrochemical-based seed treatments enhance seed germination, but they can also cause damage to the environment; therefore, sustainable technologies such as nano-based agrochemicals are urgently needed. Nanoagrochemicals can reduce the dose-dependent toxicity of seed treatment, thereby improving seed viability and ensuring the controlled release of nanoagrochemical active ingredients However, the applications of nanoagrochemicals to plants in the field raise concerns about nanomaterial safety, exposure levels, and toxicological implications to the environment and human health. In the present comprehensive review, the development, scope, challenges, and risk assessments of nanoagrochemicals on seed treatment are discussed. Moreover, the implementation obstacles for nanoagrochemicals use in seed treatments, their commercialization potential, and the need for policy regulations to assess possible risks are also discussed. Based on our knowledge, this is the first time that we have presented legendary literature to readers in order to help them gain a deeper understanding of upcoming nanotechnologies that may enable the development of future generation seed treatment agrochemical formulations, their scope, and potential risks associated with seed treatment.

Biodegradable dual stimuli responsive alginate based microgels for controlled agrochemicals release and soil remediation

To meet the growing food demand of increasing world population while reducing the harmful environmental effects of agrochemicals, development of smart nanoformulation is of prime importance. Herein, dual stimuli responsive alginate based microgels (OAlgDP MGs) (≈160 nm) are developed for controlled release of agrochemicals and soil remediation. These microgels are prepared using octyl amine functionalized alginate which is crosslinked by 3, 3'-dithiopropionohydrazide crosslinker providing both hydrazone and disulfide bonds in microgels network. OAlgDP MGs are further loaded with hydrophobic diuron herbicide displaying ≈85 % encapsulation efficiency. Sustained release of diuron is obtained in 2 mM GSH (≈100 % after 380 h) and at pH 5 (≈72 % after 240 h). Furthermore, OAlgDP MGs are nontoxic up to 150 μg/mL against HEK293T cells while their reduced form is capable of capturing the heavy metal ions (Cu²⁺ and Hg²⁺) showing the potential of the developed system for moving toward sustainable agriculture.

Sol-Gel Coatings with Azofoska Fertilizer Deposited onto Pea Seeds

Pure silica sol obtained by hydrolysis of tetraethoxysilane and the same silica sol doped with fertilizer Azofoska were used to cover the surface of pea seeds. The surface state of the coated seeds (layer continuity, thickness, elemental composition) was studied by a scanning electron microscope (SEM) and energy dispersive X-ray (EDX) detector. Different conditions such as sol mixing method, seed immersion time, effect of diluting the sol with water, and ethanol (EtOH) were studied to obtain thin continuous coatings. The coated seeds were subjected to a germination and growth test to demonstrate that the produced SiO₂ coating did not inhibit these processes; moreover, the presence of fertilizer in the coating structure facilitates the development of the seedling. The supply of nutrients directly to the grain's vicinity contributes to faster germination and development of seedlings. This may give the developing plants an advantage in growth over other undesirable plant species. These activities are in the line with the trends of searching for technologies increasing yields without creating an excessive burden on the natural environment.

Surface Morphology-Enhanced Delivery of Bioinspired Eco-Friendly Microcapsules

We report the development of novel mineralized protein microcapsules to address critical challenges in the environmental impact and performance of consumer, pharmaceutical, agrochemical, cosmetic, and paint products. We designed environment-friendly capsules composed of proteins and biominerals as an alternative to solid microplastic particles or core-shell capsules made of nonbiodegradable synthetic polymeric resins. We synthesized mineralized capsule surface morphologies to mimic the features of natural pollens, which dramatically improved the deposition of high value-added fragrance chemicals on target substrates in realistic application conditions. A mechanistic model accurately captures the observed enhanced deposition behavior and shows how surface features generate an adhesive torque that resists shear detachment. Mineralized protein capsule performance is shown to depend both on material selection that determines van der Waals attraction and on capsule-substrate energy landscapes as parameterized by a geometric taxonomy for surface morphologies. These findings have broad implications for engineering multifunctional environmentally friendly delivery systems.

Review and Perspectives of the Use of Alginate as a Polymer Matrix for Microorganisms Applied in Agro-Industry

Alginate is a polysaccharide with the property of forming hydrogels, which is economic production, zero toxicity, and biocompatibility. In the agro-industry, alginate is used as a super absorbent polymer, coating seeds, fruits, and vegetables and as a carrier of bacteria and fungi as plant-growth promoters and biocontrol. The latter has a high impact on agriculture since the implementation of microorganisms in a polymer matrix improves soil quality; plant nutrition, and is functional as a preventive measure for the appearance of phytopathogenic. Additionally, it minimizes losses of foods due to wrong post-harvest handling. In this review, we provide an overview of physicochemical properties of alginate, some methods for preparation and modification of capsules and coatings, to finally describe its application in agro-industry as a matrix of plant-growth-promoting microorganisms, its effectiveness in cultivation and post-harvest, and its effect on the environment, as well as the prospects for future agro-industrial applications.

Microbe-oriented nanoparticles as phytomedicines for plant health management: An emerging paradigm to achieve global food security

Biotic and abiotic environmental stresses affect the production and quality of agricultural products worldwide. The extensive use of traditional preventive measures comprising toxic chemicals has become more problematic due to severe ecotoxicological challenges. To address this issue, engineered nanoparticles (NPs) with their distinct physical and chemical properties has gained scientific attention and can help plants to confront environmental challenges. Despite their ameliorative and beneficial effects, toxicological concerns have been raised about NPs. The recent development of biogenic NPs (bio-NPs) is getting attention in agriculture due to their diverse biocompatibility, better functional efficacy, and eco-friendly nature compared to the recalcitrant NPs, providing a promising strategy for increased crop protection against biotic and abiotic environmental stresses, with the ultimate goal of ensuring global food security. This review summarizes the recent advances in the engineering of bio-NPs with particular emphasis on the functions of bio-NPs in protecting plants from biotic and abiotic environmental stresses, delivery and entry routes of NPs to plant systems, nanotoxicity, and plant physiological/biochemical responses to nanotoxicity. Future perspectives of bio-NP-enabled strategies, remaining pitfalls, and possible solutions to combat environmental challenges via advanced nanotechnology to achieve global food security and a sustainable agricultural system are also discussed.

Nanotechnology-Based Bioactive Antifeedant for Plant Protection

The productivity of vegetable crops is constrained by insect pests. The search for alternative insect pest control is becoming increasingly important and is including the use of plant-derived pesticides. Plant-derived pesticides are reported as effective in controlling various insect pests through natural mechanisms, with biodegradable organic materials, diverse bioactivity, and low toxicity to non-target organisms. An antifeedant approach for insect control in crop management has been comprehensively studied by many researchers, though it has only been restricted to plant-based compounds and to the laboratory level at least. Nano-delivery formulations of biopesticides offer a wide variety of benefits, including increased effectiveness and efficiency (well-dispersion, wettability, and target delivery) with the improved properties of the antifeedant. This review paper evaluates the role of the nano-delivery system in antifeedant obtained from various plant extracts. The evaluation includes the research progress of antifeedant-based nano-delivery systems and the bioactivity performances of different types of nano-carrier formulations against various insect pests. An antifeedant nano-delivery system can increase their bioactivities, such as increasing sublethal bioactivity or reducing toxicity levels in both crude extracts/essential oils (EOs) and pure compounds. However, the plant-based antifeedant requires nanotechnological development to improve the nano-delivery systems regarding properties related to the bioactive functionality and the target site of insect pests. It is highlighted that the formulation of plant extracts creates a forthcoming insight for a field-scale application of this nano-delivery antifeedant due to the possible economic production process.

Nanotechnology Potential in Seed Priming for Sustainable Agriculture

Our agriculture is threatened by climate change and the depletion of resources and biodiversity. A new agriculture revolution is needed in order to increase the production of crops and ensure the quality and safety of food, in a sustainable way. Nanotechnology can contribute to the sustainability of agriculture. Seed nano-priming is an efficient process that can change seed metabolism and signaling pathways, affecting not only germination and seedling establishment but also the entire plant lifecycle. Studies have shown various benefits of using seed nano-priming, such as improved plant growth and development, increased productivity, and a better nutritional quality of food. Nano-priming modulates biochemical pathways and the balance between reactive oxygen species and plant growth hormones, resulting in the promotion of stress and diseases resistance outcoming in the reduction of pesticides and fertilizers. The present review provides an overview of advances in the field, showing the challenges and possibilities concerning the use of nanotechnology in seed nano-priming, as a contribution to sustainable agricultural practices.