Equilibrium and kinetic modeling of chromium(VI) biosorption by Aeromonas caviae

Selective uranyl ion-imprinting with clickable amidoxime-functionalized pullulan

Manufacturing a highly effective sorbent for removing UO22+ ions from aqueous effluents is vital for safeguarding the environment and recovering valuable resources. This research presents an innovative strategy employing adsorbents derived from pullulan, specifically tailored with furfuryl-amidoxime (FAO), to improve their affinity for UO22+ ions. The formation of a UO22+ ion-imprinted sorbent (U-II-P) was achieved by crosslinking the UO22+/FAO-modified pullulan (FAO-P) complex with bis(maleimido)ethane (BME) via click Diels-Alder (DA) cyclization, enhancing its attraction and specificity for UO22+ ions. Detailed characterization of the synthesis was performed using NMR and FTIR spectroscopy, and the sorbent's external textures were analyzed using scanning electron microscopy (SEM). The U-II-P sorbent showcased outstanding preference for UO22+ over other metallic ions, with the most efficient adsorption occurring at pH 5. It exhibited a significant adsorption capacity of 262 mg/g, closely aligning with the predictions of the Langmuir adsorption model and obeying pseudo-second-order kinetic behavior. This investigation underlines the effectiveness of FAO-P as a specialized solution for UO22+ ion extraction from wastewater, positioning it as a viable option for the remediation of heavy metals.

Developing a sorptive material of cadmium from pyrolysis of hen manure

A large amount of manure is generated from concentrated animal feeding operations (CAFOs), leading to serious environmental issues and hazardous risks from pathogens, such as methicillin-resistant Staphylococcus aureus. Therefore, developing an effective method for manure disposal is essential. Thus, in this study, we suggest the use of CO2 in pyrolysis of hen manure (HM) as an effective method to convert the carbon in HM into syngas (especially carbon monoxide (CO)). HM was used and tested as the model compound. From the results of thermo-gravimetric analysis, the decarboxylation of CaCO3 in HM in the presence of N2 was realized at temperatures ranging from 638 to 754 °C. The Boudouard reaction was observed at ≥ 664 °C in the presence of CO2. Despite the lack of occurrence of the Boudouard reaction, more CO formation was observed in the presence of CO2 at ≥ 460 °C. This was deemed as a homogeneous reaction induced by CO2. Considering the high Ca content of HM, HM biochar in N2 and CO2 were used as adsorbent for removal of Cadmium (Cd), which is toxic heavy metal. The adsorption capacities of HM_N2 and HM_CO2 were 302.4 and 95.7 mg g-1, respectively. The superior performance of HM_N2 is mainly attributed to the presence of Ca(OH)2, which provides favorable (alkaline) conditions for precipitation and ion exchange. Our results indicate the environmental benefits from using CO2. Specifically, CO2 (representative greenhouse gas) converted into fuel. Given this, pyrolysis of HM in the presence of CO2 was achieved at ≤ 640 °C, and the atmospheric condition should be switched from CO2 to N2 at ≥ 640 °C to ensure the decarboxylation of CaCO3.

Low-cost novel nano-constructed granite composites for removal of hazardous Terasil dye from wastewater

The hazardous dyes on mixing with water resources are affecting many life forms. Granite stone is popular worldwide for decorating floors, making other forms of decorative materials and items. Granite stone powder waste can be obtained free of cost from marble factories as factories spend on the disposal of this waste. In the present study, novel granite stone powder waste composite has been prepared and utilized for the effective removal of Terasil dye. Two types of granite including gray granite and white granite were used in pure, calcinized, and chemically modified forms. Freundlich adsorption isotherm model best explained the adsorption mechanism of dye removal using granite composites as compared to other adsorption isothermal models. Characterization techniques like scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy were used for the determination of morphological features and functional groups of granite composites. The obtained results were statistically analyzed using analysis of variance (ANOVA) along with the post hoc Tukey test. An extraordinarily high Terasil dye uptake capacity (more than 400 mg/g) was exhibited by granite composites prepared using sodium metasilicate. The synthesized novel nano-constructed composites provided a viable strategy as compared to the pure granite stone for dye removal from wastewater water.

Removal of chromium from water using manganese (II, III) oxides coated sand: adsorption and transformation of Cr(VI) and Cr(III)

A manganese coated sand (MCS) sorbent containing manganese (II,III) oxides was developed for adsorption and transformation of chromium [Cr(VI) and Cr(III)] with potential application in flow-through permeable media adsorption filters. Characterization of the MCS sorbent using XRD and XPS showed that the oxides of manganese (II) and manganese (III) were present on the MCS sorbent surface. Adsorption of both Cr(VI) and Cr(III) onto the MCS sorbent occurred over a broad pH range from 3 to 10. Surface charge analysis of the MCS sorbent determined a pHPZC of 7.8, which may facilitate the uptake of both oxy-anionic Cr(VI) species and cationic Cr(III) species. Favorable adsorption of Cr(VI) and Cr(III) onto the MCS sorbent occurred according to the Langmuir and the Freundlich adsorption equations, with a higher adsorption capacity for Cr(III) than Cr(VI). Adsorption parameters from the Langmuir, the Freundlich and the Temkin adsorption equations showed a stronger binding of Cr(VI) than Cr(III). Adsorption of Cr(III) decreased with increasing calcium concentration while adsorption of Cr(VI) decreased with increasing concentration of common anions found in natural water in the following order: phosphate > sulfate> bicarbonate. Transformation of chromium occurred on the surface of the MCS sorbent due to the partial reduction of Cr(VI) and the partial oxidation of Cr(III), which may be attributed to the role of surface manganese (II,III) oxides as either reducing or oxidizing agents. The MCS sorbent is a recyclable and sustainable adsorbent for removal of chromium from water with an environmental impact comparable to ion-exchange technology.

A novel biosorbent functionalized pillar[5]arene: Synthesis, characterization and effective biosorption of Cr(VI)

Among toxic chemicals, hexavalent chromium (Cr(VI)) is one of the most carcinogenic and toxic pollutants that hostiles to the health of both humans and other living things. Therefore, the removal of Cr(VI) is of great importance to keep our environment clean and tidy. In this study, an easy-make, inexpensive, and natural biosorbent material (Sp-P[5]) was prepared to preserve our environment using a pillar[5]arene based-on sporopollenin microcapsule. The prepared biosorbent was successfully characterized by some techniques such as FTIR, XRD, and SEM. The biosorbent, Sp-P[5], exhibited an open mesoporous structure richly decorated with multi-amine-containing moieties resulting in enhanced Cr(VI) sorption. The sorption behavior of Cr(VI) ions is satisfactorily adapted from the sorption kinetics pseudo-second-order law and the isotherm models to the Langmuir model at different temperatures. The Langmuir model fits at different temperatures (298-328 K) and the maximum sorption capacities of the Cr(VI) ion ranged from 106.38 to 117.26 mg/g. The thermodynamic calculations reveal that the sorption of Cr(VI) ions on the Sp-P[5] is entropy-driven, endothermic, and spontaneous. The prepared biosorbent was also applied to the natural wastewater samples and different ions (chromate and dichromate). The sorption and desorption experiments showed that the sorption efficiency for Cr(VI) ions of the Sp-P[5] decreased to 70.88 % after 8 cycles. As result, the synthesized biosorbent, Sp-P[5], has outstanding potential in the removal of Cr(VI) ions from water bodies and natural wastewater systems.

Isotherm and kinetics modeling of biosorption and bioreduction of the Cr(VI) by Brachybacterium paraconglomeratum ER41

Chromium is one of the most widely used metals in industry. Hexavalent form [Cr(VI)], which is found in industrial discharges, is very toxic and very soluble in water. From soil taken from an abandoned lead and iron mine, a bacterial strain capable of reducing Cr(VI) was isolated and identified as Brachybacterium paraconglomeratum ER41. Objective of this work was to evaluate the power of this bacterium to reduce Cr(VI). Results obtained showed that this bacterium is capable of eliminating 100 mg/L of Cr(VI) after 48 h (pH 8 and temperature 30 °C). For modeling biosorption kinetics, pseudo-first-order and intraparticle diffusion models gave a better fit. Furthermore, the adsorption mechanism conformed well to Langmuir's isothermal model indicating monolayer type sorption. Biomass analysis of this bacterium before and after contact with chromium by scanning electron microscopy-energy-dispersive X-ray and by Fourier transform infrared spectroscopy showed that the surface ligands of bacterial wall are probably responsible for biosorption and bioreduction process. These results suggest a potential application of B. paraconglomeratum ER41 in bioremediation of polluted discharges.

Broad-spectrum and effective rare earth enriching via Lanmodulin-displayed Yarrowia lipolytica

The traditional mining processes of rare earth elements (REEs) are accompanied by the production of a large number of acid mine drainage rich in REEs. A wide-adaptive, low-cost and environmentally friendly biosorbent is an attractive technology to enrich and recycle REEs from the liquid wastes. To construct a broad-spectrum and efficient biosorbent, a novel REEs-binding protein Lanmodulin (LanM) is successfully displayed on the cell surface of a fungus, Yarrowia lipolytica, for the first time, and the adsorption capacities for various REEs are studied. The LanM-displayed Y. lipolytica shows significantly enhanced adsorption capacities for multiple REEs, achieving the highest reported values of 49.83 ± 2.87 mg Yb /g DCW, 50.38 ± 1.46 mg Tm /g DCW, 49.94 ± 3.61 mg Er /g DCW and 48.72 ± 3.09 mg Tb/g DCW, respectively. Moreover, the LanM-displayed Y. lipolytica possesses a high selectivity for REEs over other common metal cations and excellent suitability under acidic conditions. The kinetics and equilibrium analysis of biosorption processes agree well with the pseudo-first kinetic and Langmuir isotherm model. Based on the FTIR and SEM-EDS analysis, the chelation with phosphate/carboxylate groups dominates the Yb binding in LanM-displayed cells, and LanM enhances the adsorption performances by introducing more binding sites with high selectivity towards a wide range of REEs. Thus, the LanM-displayed Y. lipolytica investigated in this study exhibits prosperous potential for the enriching/removal of REEs from acid mine drainage.

Bioreduction and bioremoval of hexavalent chromium by genetically engineered strains (Escherichia coli MT2A and Escherichia coli MT3)

The number of studies on the removal of hazardous metals from water using genetic engineering technologies is growing. A high rate of metal ion removal from the environment is ensured, particularly through the expression of cysteine and thiol-rich proteins such as metallothioneins in bacterial cells. In this study, we used recombinant strains created by cloning the human metallothioneins MT2A and MT3 into Escherichia coli Jm109 to assess the removal and reduction of hexavalent chromium (Cr(VI)) from aqueous solutions. MT2A was the most effective strain in both Cr(VI) removal (89% in 25 mg/L Cr(VI)) and Cr(VI) reduction (76% in 25 mg/L Cr(VI)). The amount of Cr adsorbed per dry cell by the MT2A strain was 22 mg/g. The biosorption of total Cr was consistent with the Langmuir isotherm model. Scanning electron microscope (SEM) images revealed that the morphological structures of Cr(VI)-treated cells were significantly damaged when compared to control cells. Scanning transmission electron microscope (STEM) images showed black spots in the cytoplasm of cells treated with Cr(VI). Shifts in the Fourier transform infrared spectroscopy analysis (FTIR) spectra of the cells treated with Cr(VI) showed that the groups interacting with Cr were hydroxyl, amine, amide I, amide II, phosphoryl and carbonyl. When all of the experimental data was combined, it was determined that both MT2A and MT3 were effective in removing Cr(VI) from aqueous solutions, but MT2A was more effective, indicating that MT2A may be employed as a biotechnological tool.

Adsorption of hexavalent chromium from water using manganese-aluminum coated sand: Kinetics, equilibrium, effect of pH and ionic strength

Removal of hexavalent chromium [Cr(VI)] from water was evaluated using a low-cost coated sand adsorbent for potential application in a flow-through filter system using permeable adsorption media. Manganese-aluminum coated sand (MACS) was investigated as a hybrid metal oxide based adsorbent due to the potential efficacy of manganese oxide and aluminum oxide for adsorption of Cr(VI) from water. Adsorbent characterization was performed using XRD, SEM/EDX, XPS and BET. Adsorption experiments were performed to determine adsorption capacity and kinetics. The effect of pH, common co-existing ions found in natural water, and the recyclability of adsorbent were investigated. Adsorbent characterization showed that the MACS sorbent contained aluminum oxide, manganese (III) oxide and manganese (IV) oxide. Adsorption followed the Langmuir and Freundlich adsorption equations, indicating favorable adsorption of Cr(VI) onto the MACS sorbent, while results from the Dubinin-Radushkevich equation were suggestive of physical adsorption of Cr(VI). Cr(VI) adsorption onto the MACS sorbent followed pseudo-second order kinetics. The adsorbent was effective in removing Cr(VI) over a broad pH range from 3 to 9.5, while surface charge analysis confirmed the adsorption of Cr(VI) onto the acidic surface of the MACS sorbent with a pH_PZC of 9.72. The presence of co-existing ions bicarbonate, sulfate and phosphate in water resulted in a decrease in Cr(VI) uptake in the following order: phosphate > bicarbonate > sulfate. The presence of calcium resulted in a slight increase in Cr(VI) uptake. The MACS sorbent is a recyclable sorbent for adsorption and removal of Cr(VI) from water within 30 minutes of contact time.

Biological-based methods for the removal of volatile organic compounds (VOCs) and heavy metals

The current scenario of increased population and industrial advancement leads to the spoliation of freshwater and tapper of the quality of water. These results decrease in freshwater bodies near all of the areas. Besides, organic and inorganic compounds discharged from different sources into the available natural water bodies are the cause of pollution. The occurrence of heavy metals in water and volatile organic compounds (VOCs) in the air is responsible for a vast range of negative impacts on the atmosphere and human health. Nonetheless, high uses of heavy metals for human purposes may alter the biochemical and geochemical equilibrium. The major air contaminants which are released into the surroundings known as VOCs are produced through different kinds of sources, such as petrochemical and pharmaceutical industries. VOCs are known to cause various health hazards. VOCs are a pivotal group of chemicals that evaporate readily at room temperature. To get over this problem, biofiltration technology has been evolved for the treatment of heavy metals using biological entities such as plants, algae, fungi, and bacteria. Biofiltration technology is a beneficial and sustainable method for the elimination of toxic pollutants from the aquatic environment. Various types of biological technologies ranging from biotrickling filters to biofilters have been developed and they are cost-effective, simple to fabricate, and easy to perform. A significant advantage of this process is the pollutant that is transformed into biodegradable trashes which can decompose within an average time period, thus yielding no secondary pollutants. The aim of this article is to scrutinize the role of biofiltration in the removal of heavy metals in wastewater and VOCs and also to analyze the recent bioremediation technologies and methods.

Manganese release from corrosion products of cast iron pipes in drinking water distribution systems: Effect of water temperature, pH, alkalinity, SO42- concentration and disinfectants

Manganese accumulated in corrosion scales on drinking water distribution systems (DWDSs) can be released into bulk water, causing discolouration and thereby leading to customer concerns about drinking water quality. A static release experiment was conducted on iron pipe scales under three different temperatures, pH values, alkalinity values, sulfate (SO₄^2-) concentrations, and disinfectants to study the separate effect of these factors on Mn release from pipe scales under stagnant conditions. Results showed that more Mn was released from corrosion scales under the conditions of lower pH, lower alkalinity, higher temperature, and higher SO₄^2- concentrations. Three commonly used disinfectants, sodium hypochlorite (NaClO), chlorine dioxide (ClO₂), and monochloramine (NH₂Cl) were found to inhibit the release of Mn from iron corrosion scales, with the ranked order of inhibitory effect of ClO₂≈NaClO > NH₂Cl under the same CT (product of disinfectant concentration and contact time) value. The orthogonal experimental results indicated that SO₄^2- and alkalinity had extremely significant effects on the release of Mn from pipe scales, while pH and disinfectant type had a significant impact on the release of Mn from pipe scales. Thus, the SO₄^2- concentration and alkalinity of the bulk water should be determined to avoid excessive release of Mn into drinking water. However, further investigation of the effect of disinfectants on Mn release in DWDSs is necessary. This research helps establish a systematic understanding of the influential factors in Mn release from pipe scales into bulk water, as well as their significant relationships.

Non-enzymatic reduction of Cr (VI) and it's effective biosorption using heat-inactivated biomass: A fermentation waste material

The effectiveness of heat-inactivated fungal biomass a fermentation waste of newly isolated laccase enzyme producer Leiotrametes flavida was studied for Cr (VI) removal in water and applied for Cr (VI) removal from tannery effluent. Adsorption parameters pH, biomass concentration and contact time were optimized using Box-Behnken design of response surface methodology. The adsorption process fits the Langmuir isotherm. Thermodynamic and kinetic studies showed that the process is spontaneous at ambient temperature and followed the second-order kinetics model, respectively. The values of the kinetic model indicated that the adsorption process is a combination of physisorption and chemisorption. Chromium adsorption onto the biomass was confirmed by SEM-EDAX, FTIR, XPS and XRD analysis. XPS analysis confirmed the reduction of Cr (VI) to Cr (III). The amount of chromium adsorbed was 72.38 % and 68.33 % for water and effluent, respectively. Chromium adsorbed onto biomass was desorbed at pH 9 with 1 M NaOH. Total chromium desorbed was 61.40 and 59.38 percent from water and effluent, respectively. The amount of Cr (III) in the desorbed sample was 71 and 68 percent, respectively. The heat-inactivated biomass of Leiotrametes flavida is a suitable material for efficient Cr (VI) removal and detoxification.

Role of extracellular polymeric substance (EPS) in toxicity response of soil bacteria Bacillus sp. S3 to multiple heavy metals

Heavy metal resistant bacteria are of great interest because of their potential use in bioremediation. Understanding the survival and adaptive strategies of these bacteria under heavy metal stress is important for better utilization of these bacteria in remediation. The objective of this study was to investigate the role of bacterial extracellular polymeric substance (EPS) in detoxifying against different heavy metals in Bacillus sp. S3, a new hyper antimony-oxidizing bacterium previously isolated from contaminated mine soils. The results showed that Bacillus sp. S3 is a multi-metal resistant bacterial strain, especially to Sb(III), Cu(II) and Cr(VI). Toxic Cd(II), Cr(VI) and Cu(II) could stimulate the secretion of EPS in Bacillus sp. S3, significantly enhancing the adsorption and detoxification capacity of heavy metals. Both Fourier transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix (3D-EEM) analysis further confirmed that proteins were the main compounds of EPS for metal binding. In contrast, the EPS production was not induced under Sb(III) stress. Furthermore, the TEM-EDX micrograph showed that Bacillus sp. S3 strain preferentially transported the Sb(III) to the inside of the cell rather than adsorbed it on the extracellular surface, indicating intracellular detoxification rather than extracellular EPS precipitation played an important role in microbial resistance towards Sb(III). Together, our study suggests that the toxicity response of EPS to heavy metals is associated with difference in EPS properties, metal types and corresponding environmental conditions, which is likely to contribute to microbial-mediated remediation.

Efficient elimination of Cr(VI) from aqueous solutions using sodium dodecyl sulfate intercalated molybdenum disulfide

In recent years, the heavy metal ions have been immoderately released into the ecological system and result in potential hazardous to public health. Herein, the sodium dodecyl sulfate intercalated molybdenum disulfide (SDS-MoS₂) was synthesized for the adsorption of Cr(VI). The SDS molecule was flat and vertically intercalated into the interlayer of MoS₂, which was further evidenced by density functional theory calculations. The capture of Cr(VI) on the sphere-like SDS-MoS₂ relied on solution pH. The retention of Cr(VI) on SDS-MoS₂ attained 63.92 mg/g, and the removal process was endothermic, spontaneous and increased with temperature increasing. The main removal mechanism of Cr(VI) onto SDS-MoS₂ was Cr(VI) fixing on the surface of the composites by chemisorption involving possible Cr-S coordination bonding. More importantly, Cr(VI) passed into the increased interlamination and reacted at the interlamination of SDS-MoS₂, which was further proved at molecular level. The results can provide critical information for the application of SDS-MoS₂ in Cr(VI) elimination or other kinds of pollutants removal in natural aquatic environment.

Bioreduction of toxicity influenced by bioactive molecules secreted under metal stress by Azotobacter chroococcum

Heavy metal pollution destruct soil microbial compositions and functions, plant's performance and subsequently human health. Culturable microbes among many metal abatement strategies are considered inexpensive, viable and environmentally safe. In this study, nitrogen fixing bacterial strain CAZ3 recovered from chilli rhizosphere tolerated 100, 1000 and 1200 µg mL^-1 of cadmium, chromium and nickel, respectively and was identified as Azotobacter chroococcum by 16S rDNA sequence analysis. Under metal stress, cellular morphology of A. chroococcum observed under SEM was found distorted and shrinkage of cells was noticed when grown with 50 µg mL^-1 of Cd (cell size 1.7 µm) and 100 of µg mL^-1 Ni (cell size 1.3 µm) compared to untreated control (cell size 1.8 µm). In the presence of 100 µg mL^-1 of Cr, cells became elongated and measured 1.9 µm in size. Location of metals inside the cells was revealed by EDX. A dose dependent growth arrest and consequently the death of A. chroococcum cells was revealed under CLSM. A. chroococcum CAZ3 secreted 320, 353 and 133 µg EPS mL^-1 when grown with 100 µg mL^-1 each of Cd, Cr and Ni, respectively. The EDX revealed the presence of 0.4, 0.07 and 0.24% of Cd, Cr and Ni, respectively within EPS extracted from metal treated cells. Moreover, a dark brown pigment (melanin) secreted by A. chroococcum cells under metal pressure displayed tremendous metal chelating activity. The EDX spectra of melanin extracted from metal treated cells of A. chroococcum CAZ3 displayed 0.53, 0.22 and 0.12% accumulation of Cd, Cr and Ni, respectively. The FT-IR spectra of EPS and melanin demonstrated stretching vibrations and variations in surface functional groups of bacterial cells. The C-H stretching of CH₃ in fatty acids and CH₂ groups, stretching of N-H bond of proteins and O-H bond of hydroxyl groups caused the shifting of peaks in the EPS spectra. Similar stretching vibrations were recorded in metal treated melanin which involved CHO, alkyl, carboxylate and alkene groups resulting in significant peak shifts. Nuclear magnetic resonance (NMR) spectrum of EPS extracted from A. chroococcum CAZ3 revealed apparent peak signals at 4.717, 9.497, 9.369 and 9.242 ppm. However, ¹H NMR peaks were poorly resolved due largely to the impurity/viscosity of the EPS. The entrapment of metals by EPS and melanin was confirmed by EDX. Also, the induction and excretion of variable amounts of metallothioneins (MTs) by A. chroococcum under metal pressure was interesting. Conclusively, the present findings establish- (i) cellular damage due to Cd, Cr and Ni and (ii) role of EPS, melanin and MTs in adsorption/complexation and concurrently the removal of heavy metals. Considering these, A. chroococcum can be promoted as a promising candidate for supplying N efficiently to plants and protecting plants from metal toxicity while growing under metal stressed environment.

Strong chromate-adsorbent based on pyrrolic nitrogen structure: An experimental and theoretical study on the adsorption mechanism

Chromate is considered a toxic contaminant in various water sources because it poses a risk to animal and human health. To meet the stringent limits for chromium in water and wastewater, pyrrolic nitrogen structure was investigated as a chromate adsorbent for aqueous solutions, employing a polypyrrole coating on carbon black. The characteristics of the adsorbent were analyzed by high-resolution transmission electron microscopy, energy-filtered transmission electron microscopy, and X-ray photoelectron spectroscopy. Chromate was adsorbed as both Cr(III) and Cr(VI). The chromate adsorption capacity increased (from 50.84 to 174.81 mg/g) with increasing amounts of pyrrole monomers (from 50 to 86%) in the adsorbent. The adsorption capacity was well-correlated with the pyrrolic nitrogen content (from 2.06 to 6.57 at%) in the adsorbent, rather than other types of nitrogen. The optimized adsorption capacity (174.81 mg/g in the equilibrium batch experiment and 211.10 mg/g at an initial pH of 3) was far superior to those of conventional adsorbents. We investigated the mechanism behind this powerful chromate adsorption on pyrrolic nitrogen via physical/chemical analyses of the pH-dependent adsorption behavior, supported by first-principles calculation based on density functional theory. We found that Cr(III) and Cr(VI) adsorption followed different reaction paths. Cr(III) adsorption occurred in two sequential steps: 1) A Jones oxidation reaction (JOR)-like reaction of Cr(VI) with pyrrolic N that generates Cr(III), and 2) Cr(III) adsorption on the deprotonated pyrrolic N through Cr(III)-N covalent bonding. Cr(VI) adsorption followed an alternative path: hydrogen-bonding to the deprotonation-free pyrrolic N sites. The pH-dependent fractional deprotonation of the pyrrolic N sites by the JOR-like reaction in the presence of chromate played an important role in the adsorption.

Biosynthesis of micro- and nanocrystals of Pb (II), Hg (II) and Cd (II) sulfides in four Candida species: a comparative study of in vivo and in vitro approaches

Nature produces biominerals (biogenic minerals) that are synthesized as complex structures, in terms of their physicochemical properties. These biominerals are composed of minerals and biological macromolecules. They are produced by living organisms and are usually formed through a combination of chemical, biochemical and biophysical processes. Microorganisms like Candida in the presence of heavy metals can biomineralize those metals to form microcrystals (MCs) and nanocrystals (NCs). In this work, MCs and NCs of PbS, HgS or HgCl₂ as well as CdS are synthesized both in vitro (gels) and in vivo by four Candida species. Our in vivo results show that, in the presence of Pb²⁺, Candida cells are able to replicate and form extracellular PbS MCs, whereas in the presence of Hg²⁺ and Cd²⁺, they did synthesize intercellular MCs from HgS or HgCl₂ and CdS NCs respectively. The MCs and NCs biologically obtained in Candida were compared with those PbS, HgS and CdS crystals synthetically obtained in vitro through the gel method (grown either in agarose or in sodium metasilicate hydrogels). This is, to our knowledge, the first time that the biosynthesis of the various MCs and NCs (presented in several species of Candida) has been reported. This biosynthesis is differentially regulated in each of these pathogens, which allows them to adapt and survive in different physiological and environmental habitats.

Characteristic Evaluation of Graphene Oxide for Bisphenol A Adsorption in Aqueous Solution

This paper investigates the characteristics of graphene oxide (GO) for Bisphenol A (BPA) adsorption in water. Batch experiments on the influence of significant parameters were performed. While an improvement of the adsorption capacity of BPA was obtained by the increment of contact time and the initial BPA concentration, the increment of pH above 8, GO dosage, and temperature showed the reverse results. The thermodynamic study suggested that BPA adsorption on GO was an exothermic and spontaneous process. The kinetics was explained by the pseudo-second-order model which covers all steps of adsorption. The fit of the results with the Langmuir isotherm indicated the monolayer adsorption. At 298 K, the adsorption reached equilibrium within 30 min with the maximum adsorption capacity of 49.26 mg/g. The low BPA adsorption capacity of GO can be interpreted by the occurrence of oxygen-containing functional groups (OCFGs) that are able to form hydrogen bonds with the surrounding OCFGs and water molecules. This effect inhibited the role of π–π interactions that are mainly responsible for the adsorption of BPA.

Surface Modification of Naturally Available Biomass for Enhancement of Heavy Metal Removal Efficiency, Upscaling Prospects, and Management Aspects of Spent Biosorbents: A Review

Heavy metal pollution in water emerges as a severe socio-environmental problem originating primarily from the discharge of industrial wastewater. In view of the toxic, non-biodegradable, and persistent nature of most of the heavy metal ions, remediation of such components becomes an absolute necessity. Biosorption is an emerging tool for bioremediation that has gained momentum for employing low-cost biological materials with effective metal binding capacities. Even though biological materials possess excellent metal adsorption abilities, they show poor mechanical strength and low rigidity. Other disadvantages include solid-liquid separation problems, possible biomass swelling, lower efficiency for regeneration or reuse, and frequent development of high pressure drop in the column mode that limits its applications under real conditions. To improve the biosorption efficiency, biomasses need to be modified with a simple technique for selective/multi-metal adsorption. This review is intended to cover discussion on biomass modification for enhanced biosorption efficiency, mechanism studies using various instrumental/analytical techniques, and future direction for research and development including the fate of spent biosorbent. In most of the previously published researches, difficulty of the process in scaling up has not been addressed. The current article outlines the application potential of biosorbents in the development of hybrid technology integrated with membrane processes for water and wastewater treatment in industrial scale.

Treatment of Wastewater from a Dairy Industry Using Rice Husk as Adsorbent: Treatment Efficiency, Isotherm, Thermodynamics, and Kinetics Modelling

Effluent from milk processing unit contains soluble organics, suspended solids, and trace organics releasing gases, causing taste and odor, and imparting colour and turbidity produced as a result of high consumption of water from the manufacturing process, utilities and service section, chemicals, and residues of technological additives used in individual operations which makes it crucial matter to be treated for preserving the aesthetics of the environment. In this experimental study after determination of the initial parameters of the raw wastewater it was subjected to batch adsorption study using rice husk. The effects of contact time, initial wastewater concentration, pH, adsorbent dosage, solution temperature and the adsorption kinetics, isotherm, and thermodynamic parameters were investigated. The phenomenon of adsorption was favoured at a lower temperature and lower pH in this case. Maximum removal as high as 92.5% could be achieved using an adsorbent dosage of 5 g/L, pH of 2, and temperature of 30°C. The adsorption kinetics and the isotherm studies showed that the pseudo-second-order model and the Langmuir isotherm were the best choices to describe the adsorption behavior. The thermodynamic parameters suggested that not only was the adsorption by rice husk spontaneous and exothermic in nature but also the negative entropy change indicated enthalpy driven process.

In-Situ Remediation Approaches for the Management of Contaminated Sites: A Comprehensive Overview

Though several in-situ treatment methods exist to remediate polluted sites, selecting an appropriate site-specific remediation technology is challenging and is critical for successful clean up of polluted sites. Hence, a comprehensive overview of all the available remediation technologies to date is necessary to choose the right technology for an anticipated pollutant. This review has critically evaluated the (i) technological profile of existing in-situ remediation approaches for priority and emerging pollutants, (ii) recent innovative technologies for on-site pollutant remediation, and (iii) current challenges as well as future prospects for developing innovative approaches to enhance the efficacy of remediation at contaminated sites.

Bioaccumulation and biosorption of Cd(2+) and Zn(2+) by bacteria isolated from a zinc mine in Thailand

The three bacteria, Tsukamurella paurometabola A155, Pseudomonas aeruginosa B237, and Cupriavidus taiwanensis E324, were isolated from soils collected from a zinc mine in Tak Province, Thailand. Among these bacteria, P. aeruginosa B237 and C. taiwanensis E324 were tolerant of both cadmium and zinc, while T. paurometabola A155 was highly tolerant of zinc only. Bioaccumulation experiment revealed that Cd(2+) and Zn(2+) were mainly adsorbed on the cell walls of these bacteria rather than accumulated inside the cells. During Cd(2+) and Zn(2+) biosorption, P. aeruginosa B237 and T. paurometabola A155 showed the highest removal efficiencies for Cd(2+) and Zn(2+), respectively. The maximum biosorption capacities of P. aeruginosa B237 and T. paurometabola A155 biomasses for Cd(2+) and Zn(2+) biosorptions were 16.89 and 16.75 mg g(-1), respectively, under optimal conditions. The experimental data of Cd(2+) and Zn(2+) biosorptions fitted well with Langmuir isotherm model, suggesting that Cd(2+) and Zn(2+) adsorptions occurred in a monolayer pattern on a homogeneous surface. Furthermore, the pseudo-second order and pseudo-first order kinetic models best described the biosorption kinetics of Cd(2+) and Zn(2+) adsorptions, respectively, suggesting that the Cd(2+) and Zn(2+) adsorptions took place mainly by chemisorption (Cd(2+)) and physisorption (Zn(2+)).

Optimization, equilibrium, kinetic, thermodynamic and desorption studies on the sorption of Cu(II) from an aqueous solution using marine green algae: Halimeda gracilis

The aptitude of marine green algae Helimeda gracilis for sorption of Cu(II) ions from an aqueous solution was studied in batch experiments. The effect of relevant parameters such as function of pH, sorbent dosage, agitation speed and contact time was evaluated by using Response surface methodology (RSM). A maximum percentage removal of Cu (II) by Halimeda gracilis occurs at pH-4.49, sorbent dosage-1.98g/L, agitation speed-119.43rpm and contact time-60.21min. Further, the sorbent was characterized by using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron microscope (SEM) analysis. Experimental data were analyzed in terms of pseudo-first order, pseudo-second order, intraparticle diffusion, power function and elovich kinetic models. The results showed that the sorption process of Cu(II) ions followed well pseudo-second order kinetics. The sorption data of Cu(II) ions at 308.15K are fitted to Langmuir, Freundlich, Dubinin-Radushkevich (D-R), Temkin, Sips and Toth isotherms. Sorption of Cu(II) onto marine green algae Helimeda gracilis followed the Langmuir and Toth isotherm models (R(2)=0.998 and R(2)=0.999) with the maximum sorption capacity of 38.46 and 38.07mg/g. The calculated thermodynamic parameters such as ΔG°, ΔH° and ΔS° showed that the sorption of Cu(II) ions onto Helimeda gracilis biomass was feasible, spontaneous and endothermic. Desorption study shows that the sorbent could be regenerated using 0.2M HCl solution, with up to 89% recovery.

Biosorption of Cd(II) on jatropha fruit coat and seed coat

Jatropha (Jatropha curcas L.) seed coat (JSC) and fruit coat (JFC) were investigated for adsorption of Cd(II) from aqueous solutions. JFC and JSC fine powders were characterized using FTIR and SEM which indicated that both the adsorbents have high surface area, pore space on their surface, and anionic sites for metal ion binding. Batch adsorption study was conducted to study the effect of adsorption time, agitation speed, and initial concentration of Cd(II) ion, pH, and temperature on the adsorption of Cd(II) by adsorbents. The equilibrium isotherm, kinetics, and thermodynamics of the adsorption process were studied. Adsorption equilibrium followed both Langmuir and Freundlich isotherm. The adsorption capacity (Q m ) of Cd(II) on JSC and JFC were 22.83 and 21.97 mg g(-1), respectively. The adsorption of Cd(II) on JSC and JFC is endothermic in nature. The change of free energy (∆G) of the biosorption of Cd(II) on JSC ranged from -37.05 to -40.54 kJ mol(-1) and for JFC -34.50 to -37.35 kJ mol(-1). The enthalpy change (∆H) and entropy change (∆S) was 15.84 kJ mol(-1) and -0.17 kJ mol(-1) K(-1) for JSC and 8.77 kJ mol(-1) and -0.14 kJ mol(-1) K(-1) for JFC. Elovich model provided a better correlation of the experimental data in comparison with pseudo-first-order and pseudo-second-order kinetic models. The study indicated that JFC and JSC have good adsorption capacity for Cd(II).

Genetic characterization, nickel tolerance, biosorption, kinetics, and uptake mechanism of a bacterium isolated from electroplating industrial effluent

Electroplating industries in Madurai city produce approximately 49,000 L of wastewater and 1200 L of sludge every day revealing 687-5569 ppm of nickel (Ni) with other contaminants. Seventeen Ni-tolerant bacterial strains were isolated from nutrient-enriched effluents. Among them one hyper Ni accumulating strain was scored and identified as Bacillus cereus VP17 on the basis of morphology, biochemical tests, 16S rDNA gene sequencing, and phylogenetic analysis. Equilibrium data of Ni(II) ions using the bacterium as sorbent at isothermal conditions (37 °C) and pH 6 were best adjusted by Langmuir (R(2) = 0.6268) and Freundlich models (R(2) = 0.9505). Experimental validation reveals Ni sorption takes place on a heterogeneous surface of the biosorbent, and predicted metal sorption capacity is 434 ppm. The pseudo-second-order kinetic model fitted the biosorption kinetic data better than the pseudo-first-order kinetic model (R(2) = 0.9963 and 0.3625). Scanning electron microscopy, energy dispersive X-ray, and Fourier transform infrared spectroscopy studies of the bacterial strain with and without Ni(II) ion reveals the biosorption mechanism. The results conclude possibilities of using B. cereus VP17 for Ni bioremediation.

Photocatalytic degradation of p,p'-DDT under UV and visible light using interstitial N-doped TiO₂

1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (or p,p'-DDT) is one of the most persistent pesticides. It is resistant to breakdown in nature and cause the water contamination problem. In this work, a major objective was to demonstrate the application of N-doped TiO2 in degradation and mineralization of the p,p'-DDT under UV and visible light in aqueous solution. The N-doped TiO2 nanopowders were prepared by a simple modified sol-gel procedure using diethanolamine (DEA) as a nitrogen source. The catalyst characteristics were investigated using XRD, SEM, TEM, and XPS. The adsorption and photocatalytic oxidation of p,p'-DDT using the synthesized N-doped TiO2 under UV and visible light were conducted in a batch photocatalytic experiment. The kinetics and p,p'-DDT degradation performance of the N-doped TiO2 were evaluated. Results show that the N-doped TiO2 can degrade p,p'-DDT effectively under both UV and visible lights. The rate constant of the p,p'-DDT degradation under UV light was only 0.0121 min(-1), whereas the rate constant of the p,p'-DDT degradation under visible light was 0.1282 min(-1). Under visible light, the 100% degradation of p,p'-DDT were obtained from N-doped TiO2 catalyst. The reaction rate of p,p'-DDT degradation using N-doped TiO2 under visible light was sixfold higher than that under UV light. According to Langmuir-Hinshelwood model, the adsorption equilibrium constant (K) for the N-doped TiO2 under visible light was 0.03078 L mg(-1), and the apparent reaction rate constant (k) was 1.3941 mg L(-1)-min. Major intermediates detected during the p,p'-DDT degradation were p,p'-DDE, o,p'-DDE, p,p'-DDD and p,p'-DDD. Results from this work can be applied further for the breakdown of p,p'-DDT molecule in the real contaminated water using this technology.

Biosorption mechanisms involved in immobilization of soil Pb by Bacillus subtilis DBM in a multi-metal-contaminated soil

Mechanisms of soil Pb immobilization by Bacillus subtilis DBM, a bacterial strain isolated from a heavy-metal-contaminated soil, were investigated. Adsorption and desorption experiments with living bacterial cells as well as dead cells revealed that both extracellular adsorption and intracellular accumulation were involved in the Pb(2+) removal from the liquid phase. Of the sequestered Pb(II), 8.5% was held by physical entrapment within the cell wall, 43.3% was held by ion-exchange, 9.7% was complexed with cell surface functional groups or precipitated on the cell surface, and 38.5% was intracellularly accumulated. Complexation of Pb(2+) with carboxyl, hydroxyl, carbonyl, amido, and phosphate groups was demonstrated by Fourier transform infrared spectroscopic analysis. Precipitates of Pb5(PO4)3OH, Pb5(PO4)3Cl and Pb10(PO4)6(OH)2 that formed on the cell surface during the biosorption process were identified by X-ray diffraction analysis. Transmission electron microscopy-energy dispersive spectroscopic analysis confirmed the presence of the Pb(II) precipitates and that Pb(II) could be sequestered both extracellularly and intracellularly. Incubation with B. subtilis DBM significantly decreased the amount of the weak-acid-soluble Pb fraction in a heavy-metal-contaminated soil, resulting in a reduction in Pb bioavailability, but increased the amount of its organic-matter-bound fraction by 71%. The ability of B. subtilis DBM to reduce the bioavailability of soil Pb makes it potentially useful for bacteria-assisted phytostabilization of multi-heavy-metal-contaminated soil.

Development and evaluation of a new multi-metal binding biosorbent

A novel multi-metal binding biosorbent (MMBB) was developed by combining a group of three from the selective natural lignocellulosic agro-industrial wastes for effectively eliminating lead, cadmium, copper and zinc from aqueous solutions. Four MMBBs with different combinations (MMBB1: tea waste, corncob, sugarcane bagasse; MMBB2: tea waste, corncob and sawdust; MMBB3: tea waste, corncob and apple peel; MMBB4: tea waste, corncob and grape stalk) were evaluated. FTIR analysis for characterizing the MMBB2 explored that the MMBB2 contains more functional groups available for multi-metals binding. Comparing among the MMBBs as well as the single group biosorbents, MMBB2 was the best biosorbent with the maximum biosorption capacities of 41.48, 39.48, 94.00 and 27.23 mg/g for Cd(II), Cu(II), Pb(II) and Zn(II), respectively. After 5 times of desorption with CaCl2, CH3COOH and NaCl as eluent, the MMBB2 still remained excellent biosorptive capacity, so as it could be well regenerated for reuse and possible recovery of metals.

A Review of Biosorption of Chromium Ions by Microorganisms

Due to its widespread industrial use, chromium has become a serious pollutant in diverse environmental settings. The main source of chromium pollution including the Republic o Moldova is industry. It is a great need to develop new eco-friendly methods of chromium removal. Biosorption of heavy metals is a most promising technology involved in the removal of toxic metals from industrial waste streams and natural waters. This article is an extended abstract of a communication presented at the Conference Ecological Chemistry 2012.