Dynamic surface tension and dilational viscoelasticity of adsorption layers of a hydrophobically modified chitosan

Improving the hydrophobic nature of biopolymer based edible packaging film: A review

Biopolymer-based polymer compounds mainly protein and polysaccharide are commonly used in biodegradable packaging. Gelatin, cellulose, starch, chitosan, pectin, and alginate are widely used for producing biodegradable packaging films because of their nontoxicity and safety. However, some drawbacks need to be solved before employing them in food packaging, such as inappropriate wettability, low barrier properties, low mechanical properties and high moisture sensitivity. To overcome the hurdle, film-surface modifications with hydrophobic agents improve oxygen and carbon dioxide permeation while reducing moisture permeability. Some of the method used in tuning hydrophobicity is plasma treatment and coating, high pressure processing, electrospinning, etc. Additionally, hydrophobic coatings are applied on the inner surfaces of packaging films to minimize water losses, prevent leakages, and reduce spoilage and contamination of food. This article discusses the various methodologies in improving hydrophobicity for biodegradable packaging films by introducing hydrophobic agents and other active constituents to increase their functioning and intelligence.

Physics of collective cell migration

Movement of cell clusters along extracellular matrices (ECM) during tissue development, wound healing, and early stage of cancer invasion involve various inter-connected migration modes such as: (1) cell movement within clusters, (2) cluster extension (wetting) and compression (de-wetting), and (3) directional cluster movement. It has become increasingly evident that dilational and volumetric viscoelasticity of cell clusters and their surrounding substrate significantly influence these migration modes through physical parameters such as: tissue and matrix surface tensions, interfacial tension between cells and substrate, gradients of surface and interfacial tensions, as well as, the accumulation of cell and matrix residual stresses. Inhomogeneous distribution of tissue surface tension along the cell-matrix biointerface can appear as a consequence of different contractility of various cluster regions. While the directional cell migration caused by the matrix stiffness gradient (i.e., durotaxis) has been widely elaborated, the structural changes of matrix surface caused by cell tractions which lead to the generation of the matrix surface tension gradient has not been considered yet. The main goal of this theoretical consideration is to clarify the roles of various physical parameters in collective cell migration based on the formulation of a biophysical model. This complex phenomenon is discussed with the help of model systems such as the movement of cell clusters on a collagen I gel matrix, simultaneously reviewing various experimental data with and without cells.

Multi-scale nature of the tissue surface tension: Theoretical consideration on tissue model systems

Tissue surface tension is one of the key parameters that govern tissue rearrangement, shaping, and segregation within various compartments during organogenesis, wound healing, and cancer diseases. Deeper insight into the relationship between tissue surface tension and cell residual stress accumulation caused by collective cell migration can help us to understand the multi-scale nature of cell rearrangement with pronounced oscillatory trend. Oscillatory change of cell velocity that caused strain and generated cell residual stress were discussed in the context of mechanical waves. The tissue surface tension also showed oscillatory behaviour. The main goal of this theoretical consideration is to emphasize an inter-relation between various scenarios of cell rearrangement and tissue surface tension by distinguishing liquid-like and solid-like surfaces. This complex phenomenon is discussed in the context of an artificial tissue model system, namely cell aggregate rounding after uni-axial compression between parallel plates. Experimentally obtained oscillatory changes in the cell aggregate shape during the aggregate rounding, which is accompanied by oscillatory decrease in the aggregate surface area, points to oscillatory changes in the tissue surface tension. Besides long-time oscillations, cell surface tension can perform short time relaxation cycles. This behaviour of the tissue surface tension distinguishes living matter from other soft matter systems. This complex phenomenon is discussed based on dilatational viscoelasticity and thermodynamic approach.

Active wetting of epithelial tissues: modeling considerations

Morphogenesis, tissue regeneration, and cancer invasion involve transitions in tissue morphology. These transitions, caused by collective cell migration (CCM), have been interpreted as active wetting/de-wetting transitions. This phenomenon is considered based on a model system as wetting of a cell aggregate on a rigid substrate, which includes cell aggregate movement and isotropic/anisotropic spreading of a cell monolayer around the aggregate depending on the substrate rigidity and aggregate size. This model system accounts for the transition between 3D epithelial aggregate and 2D cell monolayer as a product of: (1) tissue surface tension, (2) surface tension of substrate matrix, (3) cell-matrix interfacial tension, (4) interfacial tension gradient, (5) viscoelasticity caused by CCM, and (6) viscoelasticity of substrate matrix. These physical parameters depend on the cell contractility and state of cell-cell and cell-matrix adhesion contacts, as well as the stretching/compression of cellular systems caused by CCM. Despite extensive research devoted to study cell wetting, we still do not understand the interplay among these physical parameters which induces an oscillatory trend of cell rearrangement. This review focuses on these physical parameters in governing the cell rearrangement in the context of epithelial aggregate wetting/de-wetting, and on modeling approaches aimed at reproducing and understanding these biological systems. In this context, we not only review previously published biophysical models for cell rearrangement caused by CCM, but also propose new extensions of those models to point out the interrelation between cell-matrix interfacial tension and epithelial viscoelasticity and the role of the interfacial tension gradient in cell spreading.

The dynamics along the biointerface between the epithelial and cancer mesenchymal cells: Modeling consideration

Epithelial cancer is the one of most lethal cancer type worldwide. Targeting the early stage of disease would allow dramatic improvements in the survival of cancer patients. The early stage of the disease is related to cancer cell spreading across surrounding healthy epithelium. Consequently, deeper insight into cell dynamics along the biointerface between epithelial and cancer (mesenchymal) cells is necessary in order to control the disease as soon as possible. Cell dynamics along this epithelial-cancer biointerface is the result of the interplay between various biological and physical mechanisms. Despite extensive research devoted to study cancer cell spreading across the epithelium, we still do not understand the physical mechanisms which influences the dynamics along the biointerface. These physical mechanisms are related to the interplay between physical parameters such as: (1) interfacial tension between cancer and epithelial subpopulations, (2) established interfacial tension gradients, (3) the bending rigidity of the biointerface and its impact on the interfacial tension, (4) surface tension of the subpopulations, (5) viscoelasticity caused by collective cell migration, and (6) cell residual stress accumulation. The main goal of this study is to review some of these physical parameters in the context of the epithelial/cancer biointerface elaborated on the model system such as the biointerface between breast epithelial MCF-10A cells and cancer MDA-MB-231 cells and then to incorporate these parameters into a new biophysical model that could describe the dynamics of the biointerface. We conclude by discussing three biophysical scenarios for cell dynamics along the biointerface, which can occur depending on the magnitude of the generated shear stress: a smooth biointerface, a slightly-perturbed biointerface and an intensively-perturbed biointerface in the context of the Kelvin-Helmholtz instability. These scenarios are related to the probability of cancer invasion.

The effect of macromolecular structure on the rheology and surface properties of amphiphilic random polystyrene-r-poly(meth)acrylate copolymers prepared by RDRP

In this work rheological and surface properties of various random copolymers of styrene and sodium (meth)acrylate, prepared using reversible deactivation radical polymerization (RDRP), were studied. It is shown that the properties of these polymers in water solution, relevant for several applications, are affected by their chemical structure and molecular weight. Cryo-TEM images of their concentrated water solutions do not show the presence of nano-objects as micelles, however the existence of some aggregates seems to be confirmed by fluorescence measurements using pyrene as a hydrophobic probe and by surface tension measurements. Moreover, interesting results are displayed about the viscosity as well as the surface tension of these water polymer solutions, due probably to different interactions at the molecular level as suggested by fluorescence measurements.

Probing the adsorption/desorption of amphiphilic polymers at the air-water interface during large interfacial deformations

Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers with controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured interfacial tension to the one that we expect in the case of a constant number of adsorbed monomers, we are able to deduce whether desorption or adsorption occurs during area variations. We find that the polymer chains with the longest hydrophobic grafts desorb at larger compressions compared to the polymers with the shortest grafts, because of their larger desorption energy. Furthermore, for a given graft length, we observe more desorption for polymers with the highest grafting densities. We attribute this counter intuitive result to the fact that at high grafting densities, the length of the polymer loops is shorter, and hence the elastic penalty upon compression is larger for these layers, leading to a faster desorption. Comparing the elastic penalty to thermal energy, k_BT, enables deducing a critical grafting density above which desorption of grafts is expected upon compression, which is consistent with our experimental results. In the case of large area dilations, the experiments reveal that the number of adsorbed anchors remains constant in the case of chains with a low grafting density while chains with the highest degree of grafting seem to show some degree of adsorption during the dilatation. Therefore, in these highly grafted chains there may be unadsorbed grafts remaining in the vicinity of the interface, which may adsorb quickly at the interface upon dilatation.

Synthesis, Characterization and the Solvent Effects on Interfacial Phenomena of Jatropha Curcas Oil Based Non-Isocyanate Polyurethane

Non-isocyanate polyurethane (NIPU) was prepared from Jatropha curcas oil (JCO) and its alkyd resin via curing with different diamines. The isocyanate-free approach is a green chemistry route, wherein carbon dioxide conversion plays a major role in NIPU preparation. Catalytic carbon dioxide fixation can be achieved through carbonation of epoxidized derivatives of JCO. In this study, 1,3-diaminopropane (DM) and isophorone diamine (IPDA) were used as curing agents separately. Cyclic carbonate conversion was catalyzed by tetrabutylammonium bromide. After epoxy conversion, carbonated JCO (CJCO) and carbonated alkyd resin (CC-AR) with carbonate contents of 24.9 and 20.2 wt %, respectively, were obtained. The molecular weight of CJCO and CC-AR were determined by gel permeation chromatography. JCO carbonates were cured with different amine contents. CJCO was blended with different weight ratios of CC-AR to improve its characteristics. The cured NIPU film was characterized by spectroscopic techniques, differential scanning calorimetry, and a universal testing machine. Field emission scanning electron microscopy was used to analyze the morphology of the NIPU film before and after solvent treatment. The solvent effects on the NIPU film interfacial surface were investigated with water, 30% ethanol, methyl ethyl ketone, 10% HCl, 10% NaCl, and 5% NaOH. NIPU based on CCJO and CC-AR (ratio of 1:3) with IPDA crosslink exhibits high glass transition temperature (44 °C), better solvent and chemical resistance, and Young's modulus (680 MPa) compared with the blend crosslinked with DM. Thus, this study showed that the presence of CC-AR in CJCO-based NIPU can improve the thermomechanical and chemical resistance performance of the NIPU film via a green technology approach.

Structure-Rheology Relationship in Nanosheet-Forming Peptoid Monolayers

Peptoid nanosheets are novel protein-mimetic materials that form from the supramolecular assembly of sequence-defined peptoid polymers. The component polymer chains organize themselves via a unique mechanism at the air-water interface, in which the collapse of a compressed peptoid monolayer results in free-floating, bilayer nanosheets. To impart functionality into these bilayer materials, structural engineering of the nanosheet-forming peptoid strand is necessary. We previously synthesized a series of peptoid analogues with modifications to the hydrophobic core in order to probe the nanosheet tolerance to different packing interactions. Although many substitutions were well-tolerated, routine surface pressure measurements and monolayer collapse isotherms were insufficient to explain which molecular processes contributed to the ability or inability of these peptoid analogues to form nanosheets. Here, we show that surface dilational rheology measurements of assembled peptoid monolayers at the air-water interface provide great insight into their nanosheet-forming ability. We find that a key property required for nanosheet formation is the ability to assemble into a solidlike monolayer in which the residence time of the peptoid within the monolayer is very long and does not exchange rapidly with the subphase. These collapse-competent monolayers typically have a characteristic time of diffusion-exchange values, τ_D, of >5000 s. Thus, rheological measurements provide an efficient method for assessing the nanosheet-forming ability of peptoid analogues. Results from these studies can be used to guide the rational design of peptoids for assembly into functional nanosheets.

Dilational Viscoelasticity of Adsorption Layers Measured by Drop and Bubble Profile Analysis: Reason for Different Results

The dilational viscoelasticity of adsorption layer was measured at different frequencies of drop and bubble surface area oscillations for aqueous C12EO5 solutions. The modulus values obtained by the two experimental protocols are the same for Π < 15 mN/m, while for higher surface pressures the values from drop experiments exceed those from bubble profile analysis. The nature of this phenomenon was studied using stress deformation experiments. At high surfactant concentrations the magnitude of surface tension variations is essentially higher for drops as compared with bubbles, leading to an increased viscoelasticity modulus for oscillating drops. The observed effects are analyzed quantitatively using a diffusion controlled exchange of matter model. The viscoelasticity moduli for a number of surfactants (different CnEOm and Tritons, C13DMPO, and SDS) are reported, and it is shown that the discrepancies between the data obtained by the two methods for many surfactants agree well with the predictions made here.

Sprayable Foams Based on an Amphiphilic Biopolymer for Control of Hemorrhage Without Compression

Hemorrhage (severe blood loss) from traumatic injury is a leading cause of death for soldiers in combat and for young civilians. In some cases, hemorrhage can be stopped by applying compression of a tourniquet or bandage at the injury site. However, the majority of hemorrhages that prove fatal are "non-compressible", such as those due to an internal injury in the truncal region. Currently, there is no effective way to treat such injuries. In this initial study, we demonstrate that a sprayable polymer-based foam can be effective at treating bleeding from soft tissue without the need for compression. When the foam is sprayed into an open cavity created by injury, it expands and forms a self-supporting barrier that counteracts the expulsion of blood from the cavity. The active material in this foam is the amphiphilic biopolymer, hydrophobically modified chitosan (hmC), which physically connects blood cells into clusters via hydrophobic interactions (the hemostatic mechanism of hmC is thus distinct from the natural clotting cascade, and it works even with heparinized or citrated blood). The amphiphilic nature of hmC also allows it to serve as a stabilizer for the bubbles in the foam. We tested the hmC-based hemostatic foam for its ability to arrest bleeding from an injury to the liver in pigs. Hemostasis was achieved within minutes after application of the hmC foams (without the need for external compression). The total blood loss was 90% lower with the hmC foam relative to controls.

Effect of poly(vinyl alcohol-co-vinyl acetate) copolymer blockiness on the dynamic interfacial tension and dilational viscoelasticity of polymer-anionic surfactant complex at the water-1-chlorobutane interface

Poly(vinyl alcohol-co-vinyl acetate) (PVA) copolymers obtained by partial hydrolysis of poly(vinyl acetate) (PVAc) are of practical importance for many applications, including emulsion and suspension polymerization processes. Their molecular characteristics have a major influence on the colloidal and interfacial properties. The most significant characteristics are represented by the average degree of hydrolysis D̅H̅, average degree of polymerization D̅P̅w̅ but also by the average acetate sequence length n(VAc)(0) which designates the so-called blockiness. Colloidal aggregates were observed in the aqueous PVA solutions having a D̅H̅ value of 73 mol%. The volume fraction of these aggregates at a given D̅H̅ value is directly correlated to the blockiness. Three PVA samples with identical D̅H̅ and D̅P̅w̅ but different blockiness were examined. By pendant drop and oscillating pendant drop techniques it was shown that the PVA sample having the lowest blockiness and thus the lowest volume fraction of colloidal aggregates has lower interfacial tension and elastic modulus E' values. On the contrary, the corresponding values are highest for PVA sample of higher blockiness. In the presence of sodium dodecyl sulfate (SDS), the colloidal aggregates are disaggregated by complex formation due to the hydrophobic-hydrophobic interactions. The PVA-SDS complex acts as a partial polyelectrolyte that induces the stretching of the chains and thus a reduction of the interface thickness. In this case, the interfacial tension and the elastic modulus both increase with increasing SDS concentration for all three PVA samples and the most significant effect was noticed for the most "blocky" copolymer sample.

Twist and turn: effect of stereoconfiguration on the interfacial assembly of polyelectrolytes

Understanding the conditions that promote the adsorption, assembly, and accumulation of charged macromolecules at the interface between aqueous and hydrophobic liquids is important to a multitude of biological, environmental, and industrial processes. Here, the oil-water interfacial behavior of stereoisomers of polymethacrylic acid (PMA), a model system for both naturally occurring and synthetic polyelectrolytes, is investigated with a combination of vibrational sum-frequency (VSF) spectroscopy, surface tension, and computations. Syndiotactic and isotactic isomers both show rapid adsorption to the oil-water interface with a net orientation indicative of a high degree of ordering. The stereoconfiguration is found to affect whether only a single layer or multiple layers assemble at the interface. Surface tension measurements show additional adsorption for syndiotactic PMA over time. The additional layers do not contribute to the VSF spectrum indicating disorder in all but the initial layer. The isotactic isomer shows no evidence of accumulation at the interface beyond the single ordered layer. Molecular dynamics calculations show marked differences between the two isomers in the orientation of their substituent groups at the interface. The hydrophilic and hydrophobic moieties in the isotactic isomer are easily partitioned to the water and oil phases, respectively, whereas a fair portion of hydrophobic groups remain in the water phase for the syndiotactic PMA. The available hydrophobic contacts in the water phase at the interface are credited with allowing further adsorption.

Properties of polidocanol foam in view of its use in sclerotherapy

Foam sclerotherapy is a widely used method to treat varicose veins disease. It is easy to use and apply, affordable, and has high efficiency that depends on foam stability upon injection. Since sclerotherapy is usually applied in a medical doctor's office, one of the most employed methods to generate foam is based on the Tessari technique which uses pumping cycles of liquid and air in-and-out of a double syringe system. Finally, the produced foam exits through a small orifice (∼2mm) at the output of a three-way valve. The present work shows results regarding the factors that may influence foam stability (liquid to air ratio, type of connector, syringe diameter, number of pumping cycles, etc.) of a commonly used sclerosing agent (polidocanol). Furthermore, an effort is made to evaluate the effect of adding different substances on the stability of polidocanol foams (0.5% w/w) by altering the surface tension or/and the bulk and interfacial rheological properties of the fluids. It is shown that adding small concentrations of nonionic surfactants can increase foam stability with just a very small variation of the mean bubbles size.

Nonlinear stress deformation behavior of interfaces stabilized by food-based ingredients

Interfaces stabilized by food-based ingredients, such as proteins or glycolipids, often display nonlinear behavior when subjected to oscillatory dilatational deformations, even at the lowest deformation amplitudes which can currently be applied experimentally. Here we show that classical approaches to extract dilatational properties, based on the Young-Laplace equation, may not always be suitable to analyze data. We discuss a number of examples of food-ingredient stabilized interfaces (interfaces stabilized by protein fibrils, protein-polysaccharide complexes and oligosaccharide-fatty aid conjugates) and show how an analysis of the dynamic surface tension signal using Lissajous plots and a protocol which includes deformation amplitude and droplet size variations, can be used to obtain a more detailed and accurate description of their nonlinear dilatational behavior.

Dynamic behavior of interfaces: modeling with nonequilibrium thermodynamics

In multiphase systems the transfer of mass, heat, and momentum, both along and across phase interfaces, has an important impact on the overall dynamics of the system. Familiar examples are the effects of surface diffusion on foam drainage (Marangoni effect), or the effect of surface elasticities on the deformation of vesicles or red blood cells in an arterial flow. In this paper we will review recent work on modeling transfer processes associated with interfaces in the context of nonequilibrium thermodynamics (NET). The focus will be on NET frameworks employing the Gibbs dividing surface model, in which the interface is modeled as a two-dimensional plane. This plane has excess variables associated with it, such as a surface mass density, a surface momentum density, a surface energy density, and a surface entropy density. We will review a number of NET frameworks which can be used to derive balance equations and constitutive models for the time rate of change of these excess variables, as a result of in-plane (tangential) transfer processes, and exchange with the adjoining bulk phases. These balance equations must be solved together with mass, momentum, and energy balances for the bulk phases, and a set of boundary conditions coupling the set of bulk and interface equations. This entire set of equations constitutes a comprehensive continuum model for a multiphase system, and allows us to examine the role of the interfacial dynamics on the overall dynamics of the system. With respect to the constitutive equations we will focus primarily on equations for the surface extra stress tensor.