Block copolymer surface coverage on nanoparticles

One-Step Precise Characterization of Drug Delivery Systems by PULCON Magnetic Resonance Spectroscopy

Polymers are extensively used for the realization of drug delivery systems across multiple scales, from nanomedicines to microparticles and macroscopic implantable devices, for their favorable biodegradation profiles and tunable physicochemical features. The accurate quantification of the polymer content is key to finely controlling drug loading and release and ensuring reproducibility, yet it continues to be a major challenge in the design and development of delivery systems. In this study, we introduce a novel protocol based on the PULCON technique to quantify, with a routine NMR spectroscopy analysis, the precise concentration of polymers in various delivery systems. Specifically, the PULCON protocol is applied to characterize the physicochemical and pharmaceutical properties of nanoparticles, microparticles, and implantable devices realized by combining three extensively used polymers, namely, poly(lactic-co-glycolic acid) (PLGA), poly(vinyl alcohol) (PVA), and poly(ethylene glycol) (PEG). Without using internal calibration procedures, in a single step, the PULCON protocol precisely quantifies the concentration of each polymer and the drug content. This approach can be readily implemented on standard NMR spectrometers, enabling accurate characterization of drug delivery systems and facilitating their effective development.

Preparation and cellular uptake behaviors of uniform fiber-like micelles with length controllability and high colloidal stability in aqueous media

Fragmentation/disassembly of fiber-like micelles generated by living crystalline-driven self-assembly (CDSA) is usually encountered in aqueous media, which hinders the applications of micelles. Herein, we report the generation of uniform fiber-like micelles consisting of a π-conjugated oligo(p-phenylenevinylene) core and a cross-linking silica shell with grafted poly(ethylene glycol) (PEG) chains by the combination of living CDSA, silica chemistry and surface grafting-onto strategy. Owing to the presence of crosslinking silica shell and the outmost PEG chains, the resulting micelles exhibit excellent dispersity and colloidal stability in PBS buffer, BSA aqueous solution and upon heating at 80 °C for 2 h without micellar fragmentation/disassembly. The micelles also show negligible cytotoxicity toward both HeLa cervical cancer and HEK239T human embryonic kidney cell lines. Interestingly, micelles with L n of 156 nm show the "stealth" property with no significant uptake by HeLa cells, whereas some certain amounts of micelles with L n of 535 nm can penetrate into HeLa cells, showing length-dependent cellular uptake behaviors. These results provide a route to prepare uniform, colloidally stable fiber-like nanostructures with tunable length and functions derived for biomedical applications.

Adsorption dynamics of polymeric nanoparticles at an air-water interface with addition of surfactants

HYPOTHESIS

The unusual observation that addition of sodium dodecylsulfate surfactant to an aqueous nanoparticle dispersion slows down the decrease of air:water interfacial tension is attributed to the combined interactions of the nanoparticle with surfactant and surfactant at the air:water interface. Such dynamics are controlled by electrostatic interactions.

EXPERIMENTS

The study of dynamics is achieved using the maximum bubble pressure measurement of surface tension from 0.1 s to 30 s. The NPs are assembled by Flash NanoPrecipitation with 5 kDa polyethylene glycol coronas, and cores of polystyrene, polydimethylsiloxane, or polycaprolactone. Anionic (sodium dodecylsulfate), cationic (cetyltrimethylammonium bromide), and non-ionic (decaethylene glycol monododecyl ether) surfactants are employed over concentration 10^-4 to 10^-2 mM. The zeta potentials of the NPs are measured with surfactants. Electrostatic repulsion between charged NPs and interface is calculated, as well as the adsorption energy.

FINDINGS

This is the first report to quantitatively explain the effect of surfactants on the dynamics of NP assembly at an interface. An electrostatic energy barrier slows the adsorption kinetics for NPs when the NPs have the same charge as the interface. Increasing ionic strength of the solution reduces the electrostatic barrier. Decreasing interactions between the NP core material and the surfactant reduces the barrier. Our findings offer new insights into understanding of NP interfacial self-assembly dynamics in a complex environment.

Self-Assembly of Polymer Blends and Nanoparticles through Rapid Solvent Exchange

Molecular dynamics simulations were performed to study the fabrication of polymeric colloids containing inorganic nanoparticles (NPs) via the flash nanoprecipitation (FNP) technique. During this process, a binary polymer blend, initially in a good solvent for the polymers, is rapidly mixed with NPs and a poor solvent for the polymers that is miscible with the good solvent. The simulations reveal that the polymers formed Janus particles with NPs distributed either on the surface of the aggregates, throughout their interior, or aligned at the interface between the two polymer domains, depending on the NP-polymer and NP-solvent interactions. The loading and surface density of NPs can be controlled by the polymer feed concentration, the NP feed concentration, and their ratio in the feed streams. Selective localization of NPs by incorporating electrostatic interactions between polymers and NPs has also been investigated, and was shown to be an effective way to enhance NP loading and surface density as compared to the case with only van der Waals attractions. This work demonstrates that the FNP process is promising for the production of structured and hybrid nanocolloids in a continuous and scalable way, with independent control over particle properties such as size, NP location, loading, and surface density. Our results provide useful guidelines for experimental fabrication of such hybrid nanoparticles.

Rapid Self-Assembly of Metal/Polymer Nanocomposite Particles as Nanoreactors and Their Kinetic Characterization

Self-assembled metal nanoparticle-polymer nanocomposite particles as nanoreactors are a promising approach for performing liquid phase reactions using water as a bulk solvent. In this work, we demonstrate rapid, scalable self-assembly of metal nanoparticle catalyst-polymer nanocomposite particles via Flash NanoPrecipitation. The catalyst loading and size of the nanocomposite particles can be tuned independently. Using nanocomposite particles as nanoreactors and the reduction of 4-nitrophenol as a model reaction, we study the fundamental interplay of reaction and diffusion. The induction time is affected by the sequence of reagent addition, time between additions, and reagent concentration. Combined, our experiments indicate the induction time is most influenced by diffusion of sodium borohydride. Following the induction time, scaling analysis and effective diffusivity measured using NMR indicate that the observed reaction rate are reaction- rather than diffusion-limited. Furthermore, the intrinsic kinetics are comparable to ligand-free gold nanoparticles. This result indicates that the polymer microenvironment does not de-activate or block the catalyst active sites.

Design and Fabrication of Streptavidin-Functionalized, Fluorescently Labeled Polymeric Nanocarriers

Targeted drug delivery has great potential for improving therapeutic outcomes for many diseases. Polymeric nanocarriers can improve the targeted delivery of insoluble and toxic drugs but, to achieve this, it is important to tailor the particle properties. In this study, nanoparticles comprised of poly(ethylene oxide)- b-poly(d,l-lactic acid) (PEO- b-PDLLA) were made by flash nanoprecipitation while varying the compositions of the additives poly(l-lactic acid) (PLLA), a fluorophore 6,13-bis(triisopropylsylylethynyl) (TIPS) pentacene, and poly(acrylic acid)- b-poly(d,l-lactic acid) (PAA- b-PDLLA) to characterize their effects on size, ζ potential, fluorescence, and surface functionalization. The particle size was readily increased by addition of PLLA homopolymer up to ∼40 wt % without significant change to the ζ potential. The maximum nanoparticle fluorescence was at 0.5 wt % TIPS based on the PDLLA core and exhibited quenching that could be described by Förster resonant energy transfer. The cores of the particles were coupled with streptavidin through 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide coupling chemistry. Even without the added carboxylate groups from the PAA, the base PEO- b-PDLLA nanoparticles were conjugated with streptavidin at comparable levels while retaining the functionality of streptavidin for further biotinylated ligand binding.

Adsorption and Denaturation of Structured Polymeric Nanoparticles at an Interface

Nanoparticles (NPs) have been widely applied in fields as diverse as energy conversion, photovoltaics, environment remediation, and human health. However, the adsorption and trapping of NPs interfaces is still poorly understood, and few studies have characterized the kinetics quantitatively. In many applications, such as drug delivery, understanding NP interactions at an interface is essential to determine and control adsorption onto targeted areas. Therapeutic NPs are especially interesting because their structures involve somewhat hydrophilic surface coronas, to prevent protein adsorption, and much more hydrophobic core phases. We initiated this study after observing aggregates of nanoparticles in dispersions where there had been exposure of the dispersion to air interfaces. Here, we investigate the evolution of NP attachment and structural evolution at the air-liquid interface over time scales from 100 ms to 10s of seconds. We document three distinct stages in NP adsorption. In addition to an early stage of free diffusion and a later one with steric adsorption barriers, we find a hitherto unrealized region where the interfacial energy changes due to surface "denaturation" or restructuring of the NPs at the interface. We adopt a quantitative model to calculate the diffusion coefficient, adsorption rate and barrier, and extent of NP hydrophobic core exposure at different stages. Our results deepen the fundamental understanding of the adsorption of structured NPs at an interface.

Encapsulation of OZ439 into Nanoparticles for Supersaturated Drug Release in Oral Malaria Therapy

Malaria poses a major burden on human health and is becoming increasingly difficult to treat due to the development of antimalarial drug resistance. The resistance issue is further exacerbated by a lack of patient adherence to multi-day dosing regimens. This situation motivates the development of new antimalarial treatments that are less susceptible to the development of resistance. We have applied Flash NanoPrecipitation (FNP), a polymer-directed self-assembly process, to form stable, water-dispersible nanoparticles (NPs) of 50–400 nm in size containing OZ439, a poorly orally bioavailable but promising candidate for single-dose malaria treatment developed by Medicines for Malaria Venture (MMV). During the FNP process, a hydrophobic OZ439 oleate ion paired complex was formed and was encapsulated into NPs. Lyophilization conditions for the NP suspension were optimized to produce a dry powder. The in vitro release rates of OZ439 encapsulated in this powder were determined in biorelevant media and compared with the release rates of the unencapsulated drug. The OZ439 NPs exhibit a sustained release profile and several-fold higher release concentrations compared to that of the unencapsulated drug. In addition, XRD suggests the drug was stabilized into an amorphous form within the NPs, which may explain the improvement in dissolution kinetics. Formulating OZ439 into NPs in this way may be an important step toward developing a single-dose oral malaria therapeutic, and offers the possibility of reducing the amount of drug required per patient, lowering delivery costs, and improving dosing compliance.

Controlled production of patchy particles from the combined effects of nanoprecipitation and vitrification

Using molecular dynamics simulations, we study a simple and scalable method for fabricating patchy nanoparticles via the assembly of binary polymer blends under a rapid solvent exchange. Patchiness can be achieved by incorporating a glassy component, which kinetically traps the particle morphology along the path to the equilibrium configuration. Our simulations reveal that the number of surface patches increases for larger nanoparticles and for more asymmetric blend ratios, while the size distribution of the patches remains rather uniform. Other than multi-patch nanoparticles, Janus structures have been obtained for small nanoparticles. Further, ribbon structures with elongated surface domains have also been observed for more symmetric blend ratios. Our simulations demonstrate that the nanoprecipitation technique allows for independent control over nanoparticle size, patchiness and composition. This work gives microscopic insights on the static and dynamic properties of the self-assembled particles, and provides useful guidelines for fabricating tailored patchy nanoparticles for applications in various areas.

Structured Nanoparticles from the Self-Assembly of Polymer Blends through Rapid Solvent Exchange

Molecular dynamics simulations were performed to study systematically the rapid mixing of a polymer blend in solution with a miscible nonsolvent. In agreement with experiments, we observe that polymers self-assemble into complex nanoparticles, such as Janus and core-shell particles, when the good solvent is displaced by the poor solvent. The emerging structures can be predicted on the basis of the surface tensions between the polymers as well as between the polymers and the surrounding liquid. Furthermore, the size of the nanoparticles can be independently tuned through the mixing rate and the polymer concentration in the feed stream; meanwhile, the composition of the nanoparticles can be controlled by the polymer feed ratio. Our results demonstrate that this process is highly promising for the production of structured nanoparticles in a continuous and scalable way with independent and precise control over particle size, morphology, and composition. Such tailored nanoparticles are highly sought after in various scientific and industrial applications, and our theoretical findings provide important guidelines for designing appropriate experimental fabrication processes.

Ionic Flash NanoPrecipitation (iFNP) for the facile, one-step synthesis of inorganic-organic hybrid nanoparticles in water

Ionic Flash NanoPrecipitation (iFNP) was evaluated as a novel method for the synthesis of inorganic-organic hybrid nanomaterials and proved to be remarkably effective, fast and practical. To prove the potential of iFNP, various nanostructured GdPO₄-based materials of biomedical imaging relevance were easily prepared in a one-step, tunable and highly controlled manner using only water as solvent.

Engineering Well-Characterized PEG-Coated Nanoparticles for Elucidating Biological Barriers to Drug Delivery

Poly(ethylene glycol) (PEG) coatings can substantially reduce nanoparticle uptake and clearance by immune cells as well as nonspecific interactions with the biological environment, thus potentially improving nanoparticle circulation times and biodistribution in target tissues such as tumors. Naturally, the "stealth" properties of PEG coatings are critically dependent on the density and conformation of surface PEG chains. However, there are significant technical hurdles to both generating sufficiently dense PEG coatings on nanoparticles and precisely characterizing their PEG grafting densities. Here, we describe methods for preparing PEGylated polymeric nanoparticles with precisely tunable PEG coatings without the use of organic solvents, quantifying PEGylation efficiency and density using a standard fluorescence assay, and evaluating nanoparticle uptake by immune cells using flow cytometry.

Elucidating the influence of praziquantel nanosuspensions on the in vivo metabolism of Taenia crassiceps cysticerci

The aim of this work was to develop nanosuspensions of praziquantel (PZQ) and to evaluate their influence on the energetic metabolism of cysticerci inoculated in BALB/c mice. We analyzed metabolic alterations of glycolytic pathways and the tricarboxylic acid cycle in the parasite. The nanosuspensions were prepared by precipitation and polyvinyl alcohol (PVA), poloxamer 188 (P188) and poloxamer 407 (P407) were used as stabilizers. Nanosuspension prepared with PVA had a particle size of 100nm, while P188- and P407-based nanosuspensions had particle sizes of 74nm and 285nm, respectively. The zeta potential was -8.1, -8.6, and -13.2 for the formulations stabilized with PVA, P188 and P407, respectively. Treatments of T. crassiceps cysticerci-infected mice resulted in an increase in glycolysis organic acids, and enhanced the partial reversion of the tricarboxylic acid cycle, the urea cycle and the production of ketonic bodies in the parasites when compared to the groups treated with conventional PZQ. These data suggest that PZQ nanosuspensions greatly modified the energetic metabolism of cysticerci in vivo. Moreover, the remarkable metabolic alterations produced by the stabilizers indicate that further studies on nanoformulations are required to find potentially suitable nanomedicines.

Biodistribution and fate of core-labeled 125I polymeric nanocarriers prepared by Flash NanoPrecipitation (FNP)

Non-invasive medical imaging techniques such as positron emission tomography (PET) imaging are powerful platforms to track the fate of radiolabeled materials for diagnostic or drug delivery applications. Polymer-based nanocarriers tagged with non-standard PET radionuclides with relatively long half-lives (e.g. 64Cu: t1/2 = 12.7 h, 76Br: t1/2 = 16.2h, 89Zr: t1/2 = 3.3 d, 124I: t1/2 = 4.2 d) may greatly expand applications of nanomedicines in molecular imaging and therapy. However, radiolabeling strategies that ensure stable in vivo association of the radiolabel with the nanocarrier remain a significant challenge. In this study, we covalently attach radioiodine to the core of pre-fabricated nanocarriers. First, we encapsulated polyvinyl phenol within a poly(ethylene glycol) coating using Flash NanoPrecipitation (FNP) to produce stable 75 nm and 120 nm nanocarriers. Following FNP, we radiolabeled the encapsulated polyvinyl phenol with 125I via electrophilic aromatic substitution in high radiochemical yields (> 90%). Biodistribution studies reveal low radioactivity in the thyroid, indicating minimal leaching of the radiolabel in vivo. Further, PEGylated [125I]PVPh nanocarriers exhibited relatively long circulation half-lives (t1/2 α = 2.9 h, t1/2 β = 34.9 h) and gradual reticuloendothelial clearance, with 31% of injected dose in blood retained at 24 h post-injection.

Directed Assembly of Soft Colloids through Rapid Solvent Exchange

We studied the directed assembly of soft nanoparticles through rapid micromixing of polymers in solution with a nonsolvent. Both experiments and computer simulations were performed to elucidate the underlying physics and to investigate the role of various process parameters. In particular, we discovered that no external stabilizing agents or charged end groups are required to keep the colloids separated from each other when water is used as the nonsolvent. Furthermore, the size of the nanoparticles can be reliably tuned through the mixing rate and the ratio between polymer solution and nonsolvent. Our results demonstrate that this mechanism is highly promising for the mass fabrication of uniformly sized colloidal particles, using a wide variety of polymeric feed materials.

The effect of PEG length on the size and guest uptake of PEG-capped MIL-88A particles

Different PEG length capping ligands were used to fabricated micro- and nano-MIL-88A particles. A model drug was encapsulated and released by counter-ion exchange, and its rate was dependent on the presence of PEG chains on the surface.

Effects of the molecular weight and the valency of guest-modified poly(ethylene glycol)s on the stability, size and dynamics of supramolecular nanoparticles

The length and valency of PEG-based stopper molecules have a pronounced effect on the self-assembly, size, stability and dynamics of supramolecular nanoparticles.

Modular design of redox-responsive stabilizers for nanocrystals

Many potent drugs are difficult to administer intravenously due to poor aqueous solubility. A common approach for addressing this issue is to process them into colloidal dispersions known as "nanocrystals" (NCs). However, NCs possess high-energy surfaces that must be stabilized with surfactants to prevent aggregation. An optimal surfactant should have high affinity for the nanocrystal's surface to stabilize it, but may also include a trigger mechanism that could offer the possibility of altering size distribution and uptake of the NC. This study presents a modular and systematic strategy for optimizing the affinity of polymeric stabilizers for drug nanocrystals both before and after oxidation (i.e., the selected trigger), thus allowing for the optimal responsiveness for a given application to be identified. A library of 10 redox-responsive polymer stabilizers was prepared by postpolymerization modification, using the thiol-yne reaction, of two parent block copolymers. The stabilizing potential of these polymers for paclitaxel NCs is presented as well as the influence of oxidation on size and dissolution following exposure to reactive oxygen species (ROS), which are strongly associated with chronic inflammation and cancer. Owing to the versatility of postpolymerization modification, this contribution provides general tools for preparing triggered-sheddable stabilizing coatings for nanoparticles.

A new method for encapsulating hydrophobic compounds within cationic polymeric nanoparticles

Here we present the newly developed "solvent exchange" method that overcomes the challenge of encapsulating hydrophobic compounds within nanoparticle of water soluble polymers. Our studies involved the model polymer polyvinylpyrrolidone (PVP) and the hydrophobic dye Nile red. We found that the minimum molecular weight of the polymer required for nanoparticle formation was 49 KDa. Dynamic Light Scattering (DLS) and Cryo-Transmission Electron Microscopy (cryo-TEM) studies revealed spherical nanoparticles with an average diameter ranging from 20 to 33 nm. Encapsulation efficiency was evaluated using UV spectroscopy and found to be around 94%. The nanocarriers were found to be highly stable; less than 2% of Nile red release from nanoparticles after the addition of NaCl. Nanoparticles containing Nile red were able to penetrate into glioma cells. The solvent exchange method was proved to be applicable for other model hydrophobic drug molecules including ketoprofen, ibuprofen and indomethacin, as well as other solvents.

Formation of stable nanocarriers by in situ ion pairing during block-copolymer-directed rapid precipitation

We present an in situ hydrophobic salt forming technique for the encapsulation of weakly hydrophobic, ionizable active pharmaceutical ingredients (API) into stable nanocarriers (NCs) formed via a rapid precipitation process. Traditionally, NC formation via rapid precipitation has been difficult with APIs in this class because their intermediate solubility makes achieving high supersaturation difficult during the precipitation process and the intermediate solubility causes rapid Ostwald ripening or recrystallization after precipitation. By forming a hydrophobic salt in situ, the API solubility and crystallinity can be tuned to allow for NC formation. Unlike covalent API modification, the hydrophobic salt formation modifies properties via ionic interactions, thus circumventing the need for full FDA reapproval. This technique greatly expands the types of APIs that can be successfully encapsulated in NC form. Three model APIs were investigated and successfully incorporated into NCs by forming salts with hydrophobic counterions: cinnarizine, an antihistamine, clozapine, an antipsychotic, and α-lipoic acid, a common food supplement. We focus on cinnarizine to develop the rules for the in situ nanoprecipitation of salt NCs. These rules include the pK(a)s and solubilities of the API and counterion, the effect of the salt former-to-API ratio on particle stability and encapsulation efficiency, and the control of NC size. Finally, we present results on the release rates of these ion pair APIs from the NCs.

Improving lanthanide nanocrystal colloidal stability in competitive aqueous buffer solutions using multivalent PEG-phosphonate ligands

The range of properties available in the lanthanide series has inspired research into the use of lanthanide nanoparticles for numerous applications. We aim to use NaLnF(4) nanoparticles for isotopic tags in mass cytometry. This application requires nanoparticles of narrow size distribution, diameters preferably less than 15 nm, and robust surface chemistry to avoid nonspecific interactions and to facilitate bioconjugation. Nanoparticles (NaHoF(4), NaEuF(4), NaGdF(4), and NaTbF(4)) were synthesized with diameters from 9 to 11 nm with oleic acid surface stabilization. The surface ligands were replaced by a series of mono-, di-, and tetraphosphonate PEG ligands, whose synthesis is reported here. The colloidal stability of the resulting particles was monitored over a range of pH values and in phosphate containing solutions. All of the PEG-phosphonate ligands were found to produce non-aggregated colloidally stable suspensions of the nanoparticles in water as judged by DLS and TEM measurements. However, in more aggressive solutions, at high pH and in phosphate buffers, the mono- and diphosphonate PEG ligands did not stabilize the particles and aggregation as well as flocculation was observed. However, the tetraphosphonate ligand was able to stabilize the particles at high pH and in phosphate buffers for extended periods of time.

Effects of block copolymer properties on nanocarrier protection from in vivo clearance

Drug nanocarrier clearance by the immune system must be minimized to achieve targeted delivery to pathological tissues. There is considerable interest in finding in vitro tests that can predict in vivo clearance outcomes. In this work, we produce nanocarriers with dense PEG layers resulting from block copolymer-directed assembly during rapid precipitation. Nanocarriers are formed using block copolymers with hydrophobic blocks of polystyrene (PS), poly-ε-caprolactone (PCL), poly-D,L-lactide (PLA), or poly-lactide-co-glycolide (PLGA), and hydrophilic blocks of polyethylene glycol (PEG) with molecular weights from 1 kg/mol to 9 kg/mol. Nanocarriers with paclitaxel prodrugs are evaluated in vivo in Foxn1(nu) mice to determine relative rates of clearance. The amount of nanocarrier in circulation after 4h varies from 10% to 85% of initial dose, depending on the block copolymer. In vitro complement activation assays are conducted to correlate in vivo circulation to the protection of the nanocarrier surface from complement binding and activation. Guidelines for optimizing block copolymer structure to maximize circulation of nanocarriers formed by rapid precipitation and directed assembly are proposed, relating to the relative sizes of the hydrophilic and hydrophobic blocks, the hydrophobicity of the anchoring block, the absolute size of the PEG block, and polymer crystallinity. The in vitro results distinguish between the poorly circulating PEG(5k)-PCL(9 k) and the better circulating nanocarriers, but could not rank the better circulating nanocarriers in order of circulation time. Analysis of PEG surface packing on monodisperse 200 nm latex spheres indicates that the size of the hydrophobic PCL, PS, and PLA blocks are correlated with the PEG blob size. Suggestions for next steps for in vitro measurements are made.

PEG nanocages as non-sheddable stabilizers for drug nanocrystals

Many potent drugs are difficult to administer intravenously due to poor aqueous solubility. One validated approach for addressing this issue is to process them into colloidal dispersions known as "nanocrystals" (NCs). However, NCs possess high-energy surfaces that must be stabilized with surfactants to prevent aggregation. In addition, the stabilizer provides a means of anchoring targeting moieties to the NCs for achieving deposition or uptake at specified locations. Nevertheless, a critical challenge is that the surfactant (and consequently the targeting agents) can be shed upon high dilution. This work demonstrates successful cross-linking by click chemistry of stabilizers around paclitaxel NCs to form polymeric "nanocages". Cross-linking does not cause aggregation, as evidenced by transmission electron microscopy, and the nanocages retained the particulate drug through a combination of physical entrapment and physisorption. Size measurements by dynamic light scattering showed that nanocages act as sterically stabilizing barriers to particle-particle interactions and aggregation. The nanocages were shown to be less shed from the NCs than comparable non-cross-linked stabilizers. This contribution provides crucial general tools for preparing poorly sheddable stabilizing coatings to NCs and potentially other classes of nanoparticles for which covalent attachment of the stabilizer to the particle is undesirable (e.g., a drug) or impossible (chemically inert). The presented approach also offers the possibility of more stably attaching targeting moieties to the latter by use of heterotelechelic PEG derivatives, which may favor active targeting and internalization by cells.

Kinetically assembled nanoparticles of bioactive macromolecules exhibit enhanced stability and cell-targeted biological efficacy

Kinetically assembled nanoparticles are fabricated from an advanced class of bioactive macromolecules that have potential utility in counteracting atherosclerotic plaque development via receptor-level blockage of inflammatory cells. In contrast to micellar analogs that exhibit poor potency and structural integrity under physiologic conditions, these kinetic nanoparticle assemblies maintain structural stability and demonstrate superior bioactivity in mediating oxidized low-density lipoprotein (oxLDL) uptake in inflammatory cells.

A comparison of implicit- and explicit-solvent simulations of self-assembly in block copolymer and solute systems

We have developed explicit- and implicit-solvent models for the flash nanoprecipitation process, which involves rapid coprecipitation of block copolymers and solutes by changing solvent quality. The explicit-solvent model uses the dissipative particle dynamics (DPD) method and the implicit-solvent model uses the Brownian dynamics (BD) method. Each of the two models was parameterized to match key properties of the diblock copolymer (specifically, critical micelle concentration, diffusion coefficient, polystyrene melt density, and polyethylene glycol radius of gyration) and the hydrophobic solute (aqueous solubility, diffusion coefficient, and solid density). The models were simulated in the limit of instantaneous mixing of solvent with antisolvent. Despite the significant differences in the potentials employed in the implicit- and explicit-solvent models, the polymer-stabilized nanoparticles formed in both sets of simulations are similar in size and structure; however, the dynamic evolution of the two simulations is quite different. Nanoparticles in the BD simulations have diffusion coefficients that follow Rouse behavior (D ∝ M(-1)), whereas those in the DPD simulations have diffusion coefficients that are close to the values predicted by the Stokes-Einstein relation (D ∝ R(-1)). As the nanoparticles become larger, the discrepancy between diffusion coefficients grows. As a consequence, BD simulations produce increasingly slower aggregation dynamics with respect to real time and result in an unphysical evolution of the nanoparticle size distribution. Surface area per polymer of the stable explicit-solvent nanoparticles agrees well with experimental values, whereas the implicit-solvent nanoparticles are stable when the surface area per particle is roughly two to four times larger. We conclude that implicit-solvent models may produce questionable results when simulating nonequilibrium processes in which hydrodynamics play a critical role.