Interaction in anaerobic biodecolorization of mixed azo dyes of Acid Red 1 and Reactive Black 5 under batch and continuous conditions

A review on the application of biochar as an innovative and sustainable biocarrier material in moving bed biofilm reactors for dye removal from environmental matrices

Dye decolorization through biological treatment techniques has been gaining momentum as it is based on suspended and attached growth biomass in both batch and continuous modes. Hence, this review focused on the contribution of moving bed biofilm reactors (MBBR) in dye removal. MBBR have been demonstrated to be an excellent technology for pollution extraction, load shock resistance, and equipment size and energy consumption reduction. The review went further to highlight different biocarrier materials for biofilm development this review identified biochar as an innovative and environmentally friendly material produced through the application of different kinds of reusable or recyclable wastes and biowastes. Biochar as a carbonized waste biomass could be a better competitor and environmentally friendly substitute to activated carbon given its lower mass costs. Biochar can be easily produced particularly in rural locations where there is an abundance of biomass-based trash. Given that circular bioeconomy lowers dependency on natural resources by turning organic wastes into an array of useful products, biochar empowers the creation of competitive goods. Thus, biochar was identified as a novel, cost-effective, and long-term management strategy since it brings about several essential benefits, including food security, climate change mitigation, biodiversity preservation, and sustainability improvement. This review concludes that integrating two treatment methods could greatly lead to better color, organic matter, and nutrients removal than a single biological MBBR treatment process.

Study on treatment of acid red G with bio-carbon compound immobilized white rot fungi

Corn straw biochar was used as a carrier to immobilize white rot fungi and the removal performance of immobilized pellets for acid red G (ARG) dye was studied. The results showed that the removal rate of ARG could reach 96.17% under the best preparation conditions of immobilized pellets (3% sodium alginate concentration, 0.7% corn straw biochar, 5% white rot fungus mycelium suspension, 4% CaCl₂, and 36 h immobilization time). The orthogonal test results showed that the best combination was the immobilized pellets dosage of 200/100 mL, pH of 4.5, rotation speed of 150 r/min, and initial concentration of 20 mg/L dye at 30 °C. The degradation pathway of ARG by immobilized microspheres was studied by ultraviolet-visible spectrometer, Fourier transform infrared spectroscopy, and liquid chromatography-mass spectrometry. The results showed that ARG was degraded into aniline and 5-(acetamino)-4-hydroxy-3-amino-2,7-naphthalene disulfonic acid. Aniline was further deaminated to form benzene, and benzene was ring opened to form other organic compounds; 5-(acetylamino)-4-hydroxy-3-amino-2,7-naphthalene disulfonic acid was dehydroxylated to form 5-(acetylamino)-3-amino-2,7-naphthalene disulfonic acid. This study shows that the prepared biochar immobilized pellets can be used as an efficient water treatment material to remove ARG dye from wastewater.

Photosynthetic bacteria-based technology is a potential alternative to meet sustainable wastewater treatment requirement?

A paradigm shift is underway in wastewater treatment from pollution removal to resource or energy recovery. However, conventional activated sludge (CAS) as the core technology of wastewater treatment is confronted with severe challenges on high energy consumption, sludge disposal and inevitable greenhouse gas emission, which are posing a serious impact on the current wastewater industry. It is urgent to find new alternative methods to remedy these defects. Photosynthetic bacteria (PSB) have flexible metabolic modes and high tolerance, which enhance the removal of nutrients, heavy metals and organic contaminants efficiency in different wastewater. The unique phototrophic growth of PSB breaks the restriction of nutrient metabolism in the CAS system. Recent studies have shown that PSB-based technologies can not only achieve the recovery of nutrient and energy, but also improve the degradation efficiency of refractory substances. If the application parameters can be determined, there will be great prospects and economic effects. This review summarizes the research breakthroughs and application promotion of PSB-based wastewater treatment technology in recent years. Comparing discussed the superiority and inferiority from the perspective of application range, performance differences and recovery possibility. Pathways involved in the nutrient substance and the corresponding influencing parameters are also described in detail. The mode of PSB biodegradation processes presented a promising alternative for new wastewater treatment scheme. In the future, more mechanical and model studies, deterministic operating parameters, revolutionary process design is need for large-scale industrial promotion of PSB-based wastewater treatment.

Sugar sources as Co-substrates promoting the degradation of refractory dye: A comparative study

Four sugar sources were used as co-substrates to promote the degradation of a selected refractory dye reactive black 5 (RB5) by the natural bacterial flora DDMZ1. The boosting performance of the four sugar sources on RB5 decolorization ranked as: fructose > sucrose > glucose > glucose + fructose. Kinetic results of these four co-metabolism systems agreed well with a first-order kinetic model. Four sugar sources stimulated the extracellular azoreductase secretion causing enhanced enzyme activity. An increased formation of low molecular weight intermediates was caused by the addition of sugar sources. The toxicity of RB5 degradation products was significantly reduced in the presence of sugar sources. The bacterial community structure differed remarkably as a result of sugar sources addition. For a fructose addition, a considerably enriched population of the functional species Burkholderia-Paraburkholderia and Klebsiella was noted. The results enlarge our knowledge of the microkinetic and microbiological mechanisms of co-metabolic degradation of refractory pollutants.

The triazine-based azo-azomethine dyes; synthesis, characterization, spectroscopy, solvatochromism and biological properties of 2,2'-(((6-methoxy-1,3,5-triazine-2,4-diyl)bis(sulfanediyl)bis(2,1-phenylene))bis(azanylylidene)bis(methanylylidene))bis(4-(phenyldiazenyl)phenol)

The macrocyclic azo-azomethine dyes 2,2'-(((6-methoxy-1,3,5-triazine-2,4-diyl)bis(sulfanediyl)bis(2,1-phenylene))bis(azanylylidene)bis(methanylylidene))bis(4-(phenyldiazenyl)phenol) and its derivatives were synthesized and characterized by elemental analysis, mass, FT-IR, UV-vis and NMR spectroscopy. The solvatochromism as well as effects of substitutions on the electronic absorption of these compounds have been studied in the DMSO, DMF, THF, CH3CN, CH3OH and CH3COOH as solvents. Also they positive solvatochromism behaviors are explained on the basis of intramolecular hydrogen bonding, enol-keto tautomeric and dipole moment changes. Compounds having electron donating substituent on the phenyl ring showed good antioxidant activity. However, none of them has a considerable antibacterial activity.

Conducting polypyrrole films as a potential tool for electrochemical treatment of azo dyes in textile wastewaters

In this paper, we demonstrate conducting polypyrrole films as a potential green technology for electrochemical treatment of azo dyes in wastewaters using Acid Red 1 as a model analyte. These films were synthesised by anodically polymerising pyrrole in the presence of Acid Red 1 as a supporting electrolyte. In this way, the anionic Acid Red 1 is electrostatically attracted to the cationic polypyrrole backbone formed to maintain electroneutrality, and is thus entrapped in the film. These Acid Red 1-entrapped polypyrrole films were characterised by electrochemical, microscopic and spectroscopic techniques. Based on a two-level factorial design, the solution pH, Acid Red 1 concentration and polymerisation duration were identified as significant parameters affecting the entrapment efficiency. The entrapment process will potentially aid in decolourising Acid Red 1-containing wastewaters. Similarly, in a cathodic process, electrons are supplied to neutralise the polypyrrole backbone, liberating Acid Red 1 into a solution. In this work, following an entrapment duration of 480 min in 2000 mg L(-1) Acid Red 1, we estimated 21% of the dye was liberated after a reduction period of 240 min. This allows the recovery of Acid Red 1 for recycling purposes. A distinctive advantage of this electrochemical Acid Red 1 treatment, compared to many other techniques, is that no known toxic by-products are generated in the treatment. Therefore, conducting polypyrrole films can potentially be applied as an environmentally friendly treatment method for textile effluents.