Electrophoretic mobility of soft particles. A soft step function model

Electroosmotic flow modulation and dispersion of uncharged solutes in soft nanochannel

We perform a systematic study on the modulation of electroosmotic flow (EOF), tuning the selectivity using electrolyte ions and hydrodynamic dispersion of the solute band across the soft nanochannel. The supporting walls of the channel are considered to be hydrophobic and bear non-zero surface charge. For such a channel, the inner side of the supporting rigid walls of the channel are coated with a soft polyelectrolyte layer (PEL). The inhomogeneous distribution of monomers and accompanying volume charge within the PEL is modelled via soft-step function. The dielectric permittivity of the PEL and electrolyte solution are in general different, which in turn leads to the ion partitioning effect. The impact of ion steric effects due to finite sized ions is further accounted through the modified ion activity coefficient. To model the EOF modulation considering the combined impact of the ion steric and ion partitioning effects as well as inhomogeneous distribution of monomers across the PEL, we adopt the modified Poisson-Boltzmann equation as the governing equation for electrostatic potential. The Debye-Bueche model is adopted to study the flow field across the PEL and the Stokes equation governs the EOF outside the PEL. In order to study the impact of the modulated EOF field on the dispersion of uncharged solution, we adopt three different models, i.e., a general 2D convective-diffusion model as well as cross-sectional averaged dispersion models due to Gill and late-time Taylor and Aris. Going beyond the widely employed Debye-Hückel approximation and uniform distribution of the monomer as well as accompanying volume charge, we find the results for the electric double layer (EDL) potential, EOF field and averaged throughput, by tuning the ion selectivity, etc., which is sufficient to analyze the transport of ionized liquid across the channel. The numerical results are supplemented with analytical results for the EDL potential as well as the EOF field under various limiting situations. Besides, we have further shown the impact of the modulated EOF field on the solute dispersion process. We have presented results that highlight the impact of parameters related to EOF field modulation, on solute dispersion governed by a convective-diffusive process, as well as obtaining the results for an effective dispersion coefficient. The dispersion models under the modulated EOF field adopted in the present study can thus be applied to study the dispersion process in engineered microdevices.

Quantitative model for predicting the electroosmotic flow in dual-pole nanochannels

Developing and assessing nanofluidic systems is time-consuming and costly owing to the method's novelty; hence, modeling is essential to determine the optimal areas for implementation and to grasp its workings. In this work, we examined the influence of dual-pole surface and nanopore configuration on ion transfer simultaneously. To achieve this, the two trumpet and cigarette configuration were coated with a dual-pole soft surface so that the negative charge could be positioned in the nanopore's small aperture. Subsequently, the Poisson-Nernst-Planck and Navier-Stokes equations were simultaneously solved under steady-state circumstances using varied values physicochemical properties for the soft surface and electrolyte. The pore's selectivity was S Trumpet > S Cigarette ${S}_{{\rm{Trumpet}}} &gt; {S}_{{\rm{Cigarette}}}$ , and the rectification factor, on the other hand, was R f Cigarette < R f Trumpet ${R}_{{f}_{{\rm{Cigarette}}}} &lt; {R}_{{f}_{{\rm{Trumpet}}}}$ , when the overall concentration was very low. When the ion partitioning effect is taken into account, we clearly show that the rectifying variables for the cigarette configuration and the trumpet configuration can reach values of 45 and 49.2, when the charge density and mass concentration were 100 mol/m³ and 1 mM, respectively. By using dual-pole surfaces, the controllability of nanopores' rectifying behavior may be modified to produce superior separation performance.

Electrophoresis of soft particles with hydrophobic inner core grafted with pH-regulated and highly charged polyelectrolyte layer

Electrophoresis of core-shell composite soft particles possessing hydrophobic inner core grafted with highly charged polyelectrolyte layer (PEL) has been studied analytically. The PEL bears pH-dependent charge properties due to the presence of zwitterionic functional groups. The dielectric permittivity of the PEL and bulk aqueous medium were taken to be different, which resulted in the ion-partitioning effect. Objective of this study was to provide a simple expression for the mobility of such core-shell soft particles under Donnan limit where the thickness of the PEL well exceeds the electric double layer thickness. Going beyond the widely used Debye-Hückel linearization, the nonlinear Poisson-Boltzmann equation coupled with Stokes-Darcy-Brinkman equations was solved to determine the electrophoretic mobility. The derived expression further recovers all the existing results for the electrophoretic mobility under various simplified cases. The graphical presentation of the results illustrated the impact of pertinent parameters on the electrophoretic mobility of such a soft particle.

Tripling the reverse electrodialysis power generation in conical nanochannels utilizing soft surfaces

We theoretically investigate the feasibility of enhancing the reverse electrodialysis power generation in nanochannels by covering the surface with a polyelectrolyte layer (PEL). Along these lines, two conical nanochannels are considered that differ in the extent of the covering. Each nanochannel connects two large reservoirs filled with KCl electrolytes of different ionic concentrations. Considering the Poisson-Nernst-Planck and Navier-Brinkman equations, finite-element-based numerical simulations are performed under a steady-state. The influences of the PEL properties and the salinity gradient on the reverse electrodialysis characteristics are examined in detail via a thorough parametric study. It is shown that the maximum power generated is an increasing function of the charge density and the thickness of the PEL. This means that the maximum power generated may be theoretically increased to any desired degree by covering the nanochannel surface with a sufficiently dense and thick PEL. Considering a typical PEL with a charge density of 100 mol m-3 and a thickness of 8 nm along with a high-to-low concentration ratio of 1000, we demonstrate that it is possible to extract a power density of 51.5 W m-2, which is nearly three times the maximum achievable value employing bare conical nanochannels at the same salinity gradient.

Influence of slip velocity at the core of a diffuse soft particle and ion partition effects on mobility

Nonlinear effects on the electrophoresis of a soft particle, consisting of a rigid hydrophobic core coated with a diffuse polymer layer (PEL) suspended in an electrolyte medium, are studied. The impact of the ion partitioning effect arising due to the Born energy difference between the PEL and the electrolyte is approximated based on the equilibrium Boltzmann equation, with which the ion distribution and hence, the charge density is modified. The equations describing the electrokinetic transport comprising the Darcy-Brinkman extended Navier-Stokes equations which includes the ion partitioning effect coupled with the modified Nernst-Planck equations and Poisson equations for electric field are solved numerically. The present numerical model for the soft particle compares well with the existing theoretical solutions and experimental results in the limiting cases. A deviation from existing simplified models based on the Boltzmann distribution of ions occurs when the Debye layer polarization, relaxation and the electroosmosis induced by the PEL immobile charge become significant. The hydrophobicity of the inner core strongly influences the nonlinear electrokinetic effects by modifying the Debye layer, electroosmotic flow in the PEL and surface conduction. The results indicate that the ion partitioning can significantly increase the electrophoretic mobility of the soft particle by attenuating the shielding effect. When the Debye layer is in the order of the particle size the hydrophobicity of the core surface and the ion partitioning effect manifest the surface conduction, which implies that the Boltzmann distribution of ions is no longer valid. The core hydrophobicity and ion partitioning effect have influence on the condensation of the PEL immobile charge, which creates a significant impact on the mobility.

The Next Generation of Colloidal Probes: A Universal Approach for Soft and Ultra-Small Particles

The colloidal probe technique, which is based on the atomic force microscope, revolutionizes direct force measurements in many fields, such as interface science or biomechanics. It allows for the first time to determine interaction forces on the single particle or cell level. However, for many applications, important "blind spots" remain, namely, the possibility to probe interaction potentials for nanoparticles or complex colloids with a soft outer shell. Definitely, these are colloidal systems that are currently of major industrial importance and interest from theory. The here-presented novel approach allows for overcome the aforementioned limitations. Its applicability has been demonstrated for 300 nm sized carboxylate-modified latex particles as well as sub-micron core-shell particles with a soft poly-N-isopropylacrylamide hydrogel shell and a rigid silica core. For the latter, which until now cannot be studied by the colloidal probe technique, determined is the temperature dependency of electrosteric and adhesion forces has been determined on the single particle level.

Polyelectrolyte brushes: theory, modelling, synthesis and applications

Polyelectrolyte (PE) brushes are a special class of polymer brushes (PBs) containing charges. Polymer chains attain "brush"-like configuration when they are grafted or get localized at an interface (solid-fluid or liquid-fluid) with sufficiently close proximity between two-adjacent grafted polymer chains - such a proximity triggers a particular nature of interaction between the adjacent polymer molecules forcing them to stretch orthogonally to the grafting interface, instead of random-coil arrangement. In this review, we discuss the theory, synthesis, and applications of PE brushes. The theoretical discussion starts with the standard scaling concepts for polymer and PE brushes; following that, we shed light on the state of the art in continuum modelling approaches for polymer and PE brushes directed towards analysis beyond the scaling calculations. A special emphasis is laid in pinpointing the cases for which the PE electrostatic effects can be de-coupled from the PE entropic and excluded volume effects; such de-coupling is necessary to appropriately probe the complicated electrostatic effects arising from pH-dependent charging of the PE brushes and the use of these effects for driving liquid and ion transport at the interfaces covered with PE brushes. We also discuss the atomistic simulation approaches for polymer and PE brushes. Next we provide a detailed review of the existing approaches for the synthesis of polymer and PE brushes on interfaces, nanoparticles, and nanochannels, including mixed brushes and patterned brushes. Finally, we discuss some of the possible applications and future developments of polymer and PE brushes grafted on a variety of interfaces.