Effects of different coagulants in treatment of TiO2–humic acid (HA) water and the aggregate characterization in different coagulation conditions

Improving the prediction of environmental fate of engineered nanomaterials by fractal modelling

A critical analysis of the available engineered nanomaterials (ENMs) environmental fate modelling approaches indicates that existing tools do not satisfactorily account for the complexities of nanoscale phenomena. Fractal modelling (FM) can complement existing kinetic fate models by including more accurate interpretations of shape and structure, density and collision efficiency parameters to better describe homo- and heteroaggregation. Pathways to including hierarchical symmetry concepts and a route to establishing a structural classification of nanomaterials based on FM are proposed.

Adsorption characteristics of nano-TiO2 onto zebrafish embryos and its impacts on egg hatching

The characteristics of nanoparticles (NPs) uptake may fundamentally alter physicochemical effects of engineered NPs on aquatic organisms, thereby yielding different ecotoxicology assessment results. The adsorption behavior of nano-TiO2 (P-25) on zebrafish embryos in Holtfreter's medium (pH 7.2, I ∼ 7.2 × 10(-2) M) and the presence of sodium alginate (100 mg/L) as dispersant was investigated. Zebrafish embryos (total 100) were exposed to nano-TiO2 at different concentrations (e.g., 0, 10, 20, 60, 120 mg/L) in batch-mode assay. The adsorption capacity of nano-TiO2 on fish eggs was determined by measuring the Ti concentration on the egg surface using ICP-OES analysis. Results showed that the adsorption capacity increased rapidly in the first hour, and then declined to reach equilibrium in 8 h. The adsorption characteristics was visualized as a three-step process of rapid initial layer formation, followed by break-up of aggregates and finally rearrangement of floc structures; the maximum adsorption capacity was the sum of an inner rigid layers of aggregates of 0.81-0.84 μg-TiO2/#-egg and an outer softly flocculated layers of 1.01 μg-TiO2/#-egg. The Gibbs free energy was 543.29-551.26 and 100.75 kJ/mol, respectively, for the inner-layer and the outer-layer aggregates. Adsorption capacity at 0.5-1.0 μg-TiO2/#-egg promoted egg hatching; but hatching was inhibited at higher adsorption capacity. Results clearly showed that the configuration of TiO2 aggregates could impact the hatching efficiency of zebrafish embryos.

Effect of SiO2 nanoparticles on the removal of natural organic matter (NOM) by coagulation

In order to evaluate effect of engineered nanoparticles on the removal of natural organic matter (NOM), ENPs water sample (WATERNP), and common water sample (WATERCOMMON) were prepared by mixing the SiO2 nanoparticles (SiO2 NPs, 50 nm) and common SiO2 particles (2 μm) with water from Xiaoqing River. The removal variation, NOM fractionation, flocs properties, and IR spectra were investigated after polyaluminum chloride (PAC) coagulation. The results revealed that although the removal efficiencies of turbidity and NOM from WATERNP were moderately lower than those from WATERCOMMON, the fluorescence intensities of soluble microbial byproduct-like, humic acid-like, and aromatic protein II in coagulated WATERNP were lower than that in coagulated raw water and WATERCOMMON. What's more, flocs of WATERNP showed the smallest size and highest fractal dimension as compared with other water samples, except for those obtained at B = 2.0.

Deposition behavior of residual aluminum in drinking water distribution system: Effect of aluminum speciation

Finished drinking water usually contains some residual aluminum. The deposition of residual aluminum in distribution systems and potential release back to the drinking water could significantly influence the water quality at consumer taps. A preliminary analysis of aluminum content in cast iron pipe corrosion scales and loose deposits demonstrated that aluminum deposition on distribution pipe surfaces could be excessive for water treated by aluminum coagulants including polyaluminum chloride (PACl). In this work, the deposition features of different aluminum species in PACl were investigated by simulated coil-pipe test, batch reactor test and quartz crystal microbalance with dissipation monitoring. The deposition amount of non-polymeric aluminum species was the least, and its deposition layer was soft and hydrated, which indicated the possible formation of amorphous Al(OH)3. Al13 had the highest deposition tendency, and the deposition layer was rigid and much less hydrated, which indicated that the deposited aluminum might possess regular structure and self-aggregation of Al13 could be the main deposition mechanism. While for Al30, its deposition was relatively slower and deposited aluminum amount was relatively less compared with Al13. However, the total deposited mass of Al30 was much higher than that of Al13, which was attributed to the deposition of particulate aluminum matters with much higher hydration state. Compared with stationary condition, stirring could significantly enhance the deposition process, while the effect of pH on deposition was relatively weak in the near neutral range of 6.7 to 8.7.