Adsorptive removal of arsenic from aqueous solution by zeolitic imidazolate framework-8 (ZIF-8) nanoparticles

Zearalenone removal using inactivated yeast embedded in porous modified yam starch aerogels and its application in corn silk tea

Zearalenone contaminates food and poses a threat to human health. It is vital to develop cost-effective and environmentally-friendly adsorbents for its removal. By screening Sporobolomyces pararoseus (SZ4) and modified yam starch (adsorption capacity (qe) of 1.33 and 0.94 mg/g, respectively), this study prepared a novel composite aerogel adsorbent (P-YSA@SZ410). The compressive strength of P-YSA@SZ410 was 1.35-fold higher than unloaded yeast. It contained several functional groups and three-dimensional interconnected channels, achieving a 0° contact angle within 0.18 s, thereby demonstrating excellent water-absorbent properties. With a qe of 2.96 mg/g at 308 K, the adsorption process of P-YSA@SZ410 was spontaneous, endothermic, and matched pseudo-second-order and Langmuir models. The composite adsorbed zearalenone via electrostatic attraction and hydrogen bonding, maintaining a qe of 2.24 mg/g after five cycles. P-YSA@SZ410 was found to remove zearalenone effectively under various conditions and could be applied to corn silk tea, indicating its great potential as an adsorbent material.

Migration of naphthalene in a biochar-amended bioretention facility based on HYDRUS-1D analysis

Biochar has been proved as a promising and efficient filler in bioretention facilities for enhancing the stormwater pollutants removal. However, the migration behaviors of stormwater pollutants in biochar filled bioretention facilities is unclear. In this study, as one of the most typical stormwater pollutants, naphthalene was selected as an example and a HYDRUS-1D model was first used to understand the migration behavior of naphthalene in a bioretention facility. In comparison with the conventional bioretention soil media (sandy loam), the amended biochar filled bioretention cell showed that the naphthalene removal rate was enhanced by up to 10.1%. Meanwhile, the experimental data was well-fitted by the "two-site sorption model" in HYDRUS-1D model. Another, the effect of rainfall intensity on the naphthalene migration in both bioretention columns was further investigated. The HYDRUS-1D model fitting indicated that the increase in rainfall intensity promoted naphthalene migration by increasing hydraulic conductivity and water flux. In addition, static batch experiments revealed that the biochar filled fillers achieved about 50% higher adsorption capacity than sandy loam. The sensitivity analysis from the HYDRUS-1D model data verified adsorption coefficient Kd and longitudinal dispersivity λ are the main factors affecting naphthalene migration. Finally, the model simulation displays that the proportion of naphthalene retained by the fillers was highest during high rainfall intensities, indicating that the fillers remain the most important fate for naphthalene. This study presents research on the behavior and mechanisms of stormwater pollutant transport through improved bioretention facilities.

Surface properties of carbon nitride materials used in photocatalytic systems for energy and environmental applications

The use of photocatalytic systems involving semiconductor materials for environmental and energy applications, such as water remediation and clean energy production, is highly significant. In line with this, a family of carbon-based polymeric materials known as carbon nitride (CNx) has emerged as a promising candidate for this purpose. Despite CNx's remarkable characteristics of performance, stability, and visible light responsiveness, its chemical inertness and poor surface properties hinder interfacial interactions, which are key to effective catalysis. This highlight reviews the literature focusing on the surface chemistry of CNx, especially its structural formation pathway, reactivity, and solvent interactions. It also explores recent advancements in the use of modified CNx for hydrogen production and arsenic remediation, offering recommendations for future material design improvements.

Uranium extraction by metal-organic frameworks: advanced materials for new sorption possibilities

This review examines the advances and applications of metal-organic frameworks (MOFs) in the field of the extraction of uranium from various sources, focusing on their potential to address critical issues in nuclear fuel cycles. MOFs, characterized by their high surface area, tunable porosity, and chemical versatility, offer a promising alternative to traditional extraction methods. The review paper provides a comprehensive analysis of the synthesis strategies, functionalization techniques, and adsorption mechanisms of MOFs tailored for uranium capture. Furthermore, the review discusses the challenges and future directions in the field, emphasizing the need for scalable production, real-world application testing, and environmental impact assessment. This review aims to highlight the potential of MOFs to improve the sustainability and efficiency of uranium extraction processes.

Effect and mechanism of coexistence of microplastics on arsenate adsorption capacity in water

Arsenic pollution control technology in water was important to ensure environmental health and quality safety of agricultural products. Therefore, the adsorption performance of three adsorbents for chitosan, sepiolite, and Zeolitic Imidazolate Framework-8 (ZIF-8) were investigated in arsenate contaminated water. The results revealed that the adsorption capacity of ZIF-8 was higher than that of chitosan and sepiolite. The analysis of adsorption isotherm models showed that the behavior of ZIF-8 was more consistent with the Langmuir model. Furthermore, the adsorption mechanisms of three adsorbents for arsenate were investigated by Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The analysis of FTIR showed that ZIF-8 maintained the stability of the interaction with arsenate by forming As-O chemical bonds. However, the effect of chitosan and sepiolite with arsenate was mainly physical adsorption. The analysis of XPS showed that the absorption of ZIF-8 with arsenate involved metal sites and nitrogen through the characteristic peak and the change of the binding energy. Furthermore, the impact of microplastics as a widespread coexistence pollutant in the water on adsorbent performance was investigated. The results indicated that the adsorption capacity of ZIF-8 was almost not affected by microplastics. The maximum adsorption amount of arsenate was changed from 73.45 mg/g to 81.89 mg/g. However, the maximum adsorption amount of chitosan and sepiolite decreased by 31.4 % and 11.6 %, respectively. The analysis of FTIR and XPS revealed that ZIF-8 enhances arsenate adsorption by forming N-O-As bonds in the presence of microplastics. This study provides scientific evidence for the management of arsenate pollution in water bodies, especially in complex water bodies containing microplastics.

Enhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8

Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal-organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20-50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+‏.

Platform for the Immobilizing of Ultrasmall Pd Clusters for Carbonylation: In Situ Self-Templating Fabrication of ZIF-8 on ZnO

Incorporating metal clusters into the confined cavities of metal-organic frameworks (MOFs) to form MOF-supported catalysts has attracted considerable research interest with regard to carbonylation reactions. Herein, a self-templating method is used to prepare the zinc oxide (ZnO)-supported core-shell catalyst ZnO@Pd/ZIF-8. This facile strategy controls the growth of metal sources on the ZIF-8 shell layer and avoids the metal diffusion or aggregation problems of the conventional synthesis method. The characteristics of the catalysts show that the palladium (Pd) clusters are highly dispersed with an average particle size of ≈1.2 nm, making them excellent candidates as a catalyst for carbonylation under mild conditions. The optimal catalyst (1.25-ZnO@Pd/ZIF-8) exhibits excellent activity in synthesizing α, β-alkynyl ketones under 1 atm of carbon monooxide (CO), and the conversion rate of 1, 3-diphenylprop-2-yn-1-one is 3.09 and 3.87 times more than those of Pd/ZIF-8 and Pd2+, respectively, for the first 2 h. Moreover, the 1.25-ZnO@Pd/ZIF-8 is recyclable, showing negligible metal leaching, and, under the conditions used in this investigation, can be reused at least five times without considerable loss in its catalytic efficiency. This protocol can also be applied with other nucleophile reagents to synthesize esters, amides, and acid products.

Mechanism of efficient adsorption for arsenic in aqueous solution by zeolitic imidazolate framework‑8

Arsenic (As) is one extremely hazardous and carcinogenic metalloid element. Due to mining, metal smelting, and other human activities, the pollution of water (especially groundwater) and soil caused by As is increasingly serious, which badly threatens the environment and human health. In this study, a zeolite imidazolate framework (ZIF-8) was synthesized at room temperature and employed as an adsorbent to facilitate the adsorption of As(III) and As(V) from the solution. The successful synthesis of ZIF-8 was demonstrated by X-ray diffraction (XRD), and scanning electron microscopy (SEM) revealed that its particle size was approximately 80 nm. The adsorption kinetics, adsorption isotherm, solution pH, dose, coexisting ions, and the synonymous elements antimony (Sb) were conducted to study the adsorption of As by ZIF-8 nanoparticles. The maximum saturation adsorption capacity was determined to be 101.47 mg/g and 81.40 mg/g for As(III), and As(V) at initial pH = 7.0, respectively. Apparently, ZIF-8 had a good removal effect on As, and it still maintained a good performance after four cycles. The coexisting ions PO43- and CO32- inhibited the adsorption of both As(III) and As(V). ZIF-8 performed well in removing both As and Sb simultaneously, although the presence of Sb hindered the adsorption of both As(III) and As(V). Both FTIR and XPS indicated the adsorption mechanism of As on ZIF-8: ZIF-8 generates a large amount of Zn-OH on the surface through hydrolysis and partial fracture of Zn-N, both of which form surface complexes with As.

Zeolitic imidazolate frameworks (ZIFs): Advanced nanostructured materials to enhance the functional performance of food packaging materials

Zeolite imidazole framework (ZIF) materials are a class of metallic organic framework (MOF) materials that have several potential applications in the food and other industries. They consist of metal ions or clusters of metal ions coordinated with imidazole-based organic linkers, creating a three-dimensional solid structure with well-defined pores and channels. ZIFs possess several important features, including high porosity, tunable pore sizes, high surface areas, adjustable surface chemistries, and good stabilities. These characteristics make them highly versatile materials that can be used in a variety of applications, including smart and active food packaging. Based on their controllable compositions, dimensions, and pore sizes, the properties of ZIFs can be tailored for a diverse range of applications, including energy storage, sensing, separation, encapsulation, and catalysis. In this article, we focus on recent progress and potential applications of ZIFs in food packaging materials. Previous studies have shown that ZIFs can significantly improve the optical, mechanical, barrier, thermal, sustainability, and preservative properties of packaging materials. Moreover, ZIFs can be used as carriers to encapsulate, protect, and control the release of bioactive agents in packaging materials. ZIFs are capable of selectively adsorbing and releasing molecules based on their size, shape, and surface properties. These unique characteristics make them particularly suitable for smart or active food packaging applications. By selectively removing gases (such as oxygen, carbon dioxide, water, or ethylene) ZIFs can improve the shelf life and quality of packaged foods. In addition, they can be employed to control the growth of spoilage microorganisms and minimize oxidation reactions, thereby enhancing the freshness and extending the shelf life of foods. They may also be used to create sensors capable of detecting and indicating food spoilage. For instance, ZIFs that change color or release specific compounds when spoilage products are present can provide visual or chemical indications of food deterioration. This feature is especially valuable in ensuring the safety and quality of packaged food, as it enables consumers and retailers to easily identify spoiled products. ZIFs can be functionalized using various additives, including antioxidants, antimicrobials, pigments, and flavors, which can improve the preservative and sensory properties of packaged foods. Moreover, ZIF-based packaging materials offer sustainability benefits. Unlike traditional plastic packaging, ZIFs are biodegradable and can easily be disposed of without causing harm to the environment, thereby reducing the adverse effects of plastic waste materials. The application of ZIFs in smart/active food packaging offers exciting possibilities for enhancing the shelf life, quality, and safety of foods. With further research and development, ZIF-based packaging could become a sustainable alternative to plastic-based packaging in the food industry. An important aim of this review article is to stimulate further research on the development and application of ZIFs within food packaging materials.

Heavy metal sequestration from wastewater by metal-organic frameworks: a state-of-the-art review of recent progress

Metal-organic frameworks (MOFs) have emerged as highly promising adsorbents for removing heavy metals from wastewater due to their tunable structures, high surface areas, and exceptional adsorption capacities. This review meticulously examines and summarizes recent advancements in producing and utilizing MOF-based adsorbents for sequestering heavy metal ions from water. It begins by outlining and contrasting commonly employed methods for synthesizing MOFs, such as solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical. Rather than delving into the specifics of adsorption process parameters, the focus shifts to analyzing the adsorption capabilities and underlying mechanisms against critical metal(loid) ions like chromium, arsenic, lead, cadmium, and mercury under various environmental conditions. Additionally, this article discusses strategies to optimize MOF performance, scale-up production, and address environmental implications. The comprehensive review aims to enhance the understanding of MOF-based adsorption for heavy metal remediation and stimulate further research in this critical field. In brief, this review article presents a comprehensive overview of the contemporary information on MOFs as an effective adsorbent and the challenges being faced by these adsorbents for heavy metal mitigation (including stability, cost, environmental issues, and optimization), targeting to develop a vital reference for future MOF research.

Fe3O4@Chitosan@ZIF-8@RVG29, an anti-glioma nanoplatform guided by fixed and activated by alternating magnetic field

There is considerable interest in developing anti-glioma nanoplatforms. They make the all-in-one combination of therapies possible. Here we show how the selective Glioblastoma multiforme (GBM) cell killing of the here-established nanoplatforms increased after each coating and how the here-established vibration-inducing Alternating magnetic field (AMF) decreased the treatment time from 72 h to 30 s. Thanks to their magnetite core, these nanoplatforms can be guided to the tumor's specific site by a Fixed magnetic field, they bypass the Blood-Brain Barrier (BBB) and accumulate at the tumor site thanks to the RVG29 bonding to the G-protein on the ion-gated channel receptor known as the nicotinic acetylcholine receptor (nAchR), which expresses on BBB cells and overexpresses on GBM cells, and thanks to the positive charge gained by both chitosan and RVG29's peptide. Both ZIF-8 and its mediate adherence, Chitosan increases the drug loading capacity that stimuli response to the tumor's acidic environment. The Zn2+ ions generated from ZIF-8 sustained degradation in such an environment kill the GBM cells. Dynamic Light Scattering (DLS) evaluated these nanoplatform's mean size 155 nm indicating their almost optimum size for brain applications. Based on their elements' intrinsic properties, these nanoplatforms can enhance and combine other adjuvant therapies.

Nanoarchitectonics Design Strategy of Metal-Organic Framework and Bio-Metal-Organic Framework Composites for Advanced Wastewater Treatment through Adsorption

Freshwater depletion is an alarm for finding an eco-friendly solution to treat wastewater for drinking and domestic applications. Though several methods like chlorination, filtration, and coagulation-sedimentation are conventionally employed for water treatment, these methods need to be improved as they are not environmentally friendly, rely on chemicals, and are ineffective for all kinds of pollutants. These problems can be addressed by employing an alternative solution that is effective for efficient water treatment and favors commercial aspects. Metal organic frameworks (MOFs), an emerging porous material, possess high stability, pore size tunability, greater surface area, and active sites. These MOFs can be tailored; thus, they can be customized according to the target pollutant. Hence, MOFs can be employed as adsorbents that effectively target different pollutants. Bio-MOFs are a kind of MOFs that are incorporated with biomolecules, which also possess properties of MOFs and are used as a nontoxic adsorbent. In this review, we elaborate on the interaction between MOFs and target pollutants, the role of linkers in the adsorption of contaminants, tailoring strategy that can be employed on MOFs and Bio-MOFs to target specific pollutants, and we also highlight the effect of environmental matrices on adsorption of pollutants by MOFs.

Adsorption of tetracycline from aqueous solution by ZIF-8: Isotherms, kinetics and thermodynamics

In this study, ZIF-8 nanoparticles were synthesized using a simple method at room temperature. The ZIF-8 nanoparticles were then characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET (Brunauer-Emmett-Teller) specific surface area, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and zeta potential. Subsequent batch adsorption experiments evaluated the adsorption performance of ZIF-8 on tetracycline, examining key pa-rameters like reaction time, pH, temperature, and adsorbent dosage. The results revealed a removal rate for TC of up to 90.59%. The adsorption data aligned with the Sips model, showcasing a maximum adsorption capacity of 359.61 mg/g at 303K. Further, the adsorption kinetics adhered to the pseudo-second-order kinetic model with an equilibrium adsorption capacity of 90 mg/g at 303K. The considerable specific surface area of ZIF-8, standing at 1674.169 m2/g, likely enhances the adsorption efficacy. Analysis using XRD and FTIR confirmed the adsorption of TC on the ma-terial's surface. Overall, the predominant driving forces behind the adsorption process were identified as electrostatic interactions and π-π stacking interactions.

Zeolitic Imidazole Framework (ZIF)-Sponge Composite for Highly Efficient U(VI) Elimination

Herein, a zeolitic imidazole framework (ZIF-67) composite was prepared by a rapid, simple and inexpensive situ hybridization technique applying polyurethane sponge (PU) as support, which was designated as ZIF-67-PU. The ZIF-67 nanoparticle was successfully supported on the surface of sponge skeletons mainly through electrostatic attraction as well as probable π-π stacking interactions with PAM modification of the sponge. The resultant ZIF-67-PU exhibited a remarkably enhanced U(VI) elimination capacity of 150.86 mg∙g-1 on the basis of the Langmuir isotherm model, in comparison to pristine sponge. Additionally, the mechanism for U(VI) elimination was mainly achieved through the complex reaction between C-N(H)/-OH groups in ZIF-67 and U(VI), based on XPS investigations. ZIF-67-PU represents a simple, feasible and low-cost disposal option for preparing ZIF-coated sponges of any shape that can enhance the U(VI) elimination capacity. Furthermore, this approach can be widely applied to the preparation of various kinds of MOF-sponges through this situ hybridization technique.

Imidazolate framework material for crude oil removal in aqueus media: Mechanism insight

Considerable amount of produced water discharged by the oil industry contributes to an environmental imbalance due to the presence of several components potentially harmful to the ecosystem. We investigated the factors influencing the adsorption capacity of Zinc Imidazolate Framework-8 (ZIF-8) in finite bath systems for crude oil removal from petroleum extraction in synthetic produced water. ZIF-8, experimentally obtained by solvothermal method, was characterized by XRD, FTIR, TGA, BET and its point of zero charge (pHpcz) was determined. Synthesized material showed high crystallinity, with surface area equal to 1558 m2 g-1 and thermal stability equivalent to 400 °C. Adsorption tests revealed, based on the Sips model, that the process takes place in a heterogeneous system. Additionally, intraparticle diffusion model exhibited multilinearity characteristics during adsorption process. Thermodynamic investigation demonstrated that adsorption process is spontaneous and exothermic, indicating a physisorption phenomenon. These properties enable the use of ZIF-8 in oil adsorption, which presented an adsorption capacity equal to 452.9 mg g-1. Adsorption mechanism was based on hydrophobic interactions, through apolar groups present on ZIF-8 structure and oil hydrocarbons, and electrostatic interactions, through the difference in charges between positive surface of adsorbent and negatively charged oil droplets.

Arsenic removal adsorbent using limonite-polyethersulfone composite fiber via continuous flow column process

This research introduces an enhanced limonite-based composite fiber adsorbent for arsenic (As) removal. The modification involves creating polyethersulfone (PES)-limonite composite fibers loaded with 60 wt% limonite powders, designed to be applicable in water flow environments. The fibers were prepared using a wet-spinning process based on phase inversion, with varying concentrations (10, 20, and 30 wt%) of PES in NMP solution. The composite fiber with 10 wt% NMP exhibited a porous structure and demonstrated efficient absorption of both As(III) and As(V). Adsorption followed the Langmuir model, with qm values of 1.5 mg/g for As(III) and 3.2 mg/g for As(V) at pH 6. In column experiments, As removal rates increased with contact time, attributed to decreased flow rates (1 mL/min). Moreover, increasing fiber column height led to enhanced removal rates, as indicated by the Adams-Bohart model. The mechanism for As(V) removal involved the formation of an inner-sphere complex through ion exchange between α-FeOOH and HAsO4 - and H2 AsO4 2- in an aqueous solution at pH 6.8. PRACTITIONER POINTS: Changing the polyethersulfone ratio in the composite leads to variations in the appearance of limonite within each composite fiber. Limonite composite fibers effectively remove As(III) and As(V) at neutral pH. The adsorption behavior follows Langmuir kinetic model, the qm of 1.5 mg/g for As(III) and 3.2 mg/g for As(V). Longer columns and contact times enhance arsenic (As) removal in practical water treatment systems. Adam-Bohart model aids in predicting breakthrough and saturation time in As adsorption column design.

Prediction of arsenic adsorption onto metal organic frameworks and adsorption mechanisms interpretation by machine learning

Metal-organic frameworks (MOFs) are promising adsorbents for the removal of arsenic (As) from wastewater. The As removal efficiency is influenced by several factors, such as the textural properties of MOFs, adsorption conditions, and As species. Examining all of the relevant factors through traditional experiments is challenging. To predict the As adsorption capacities of MOFs toward organic, inorganic, and total As and reveal the adsorption mechanisms, four machine learning-based models were developed, with the adsorption conditions, MOF properties, and characteristics of different As species as inputs. The results demonstrated that the extreme gradient boosting (XGBoost) model exhibited the best predictive performance (test R2 = 0.93-0.96). The validation experiments demonstrated the high accuracy of the inorganic As-based XGBoost model. The feature importance analysis showed that the concentration of As, the surface area of MOFs, and the pH of the solution were the three key factors governing inorganic-As adsorption, while those governing organic-As adsorption were the concentration of As, the pHpzc value of MOFs, and the oxidation state of the metal clusters. The formation of coordination complexes between As and MOFs is possibly the major adsorption mechanism for both inorganic and organic As. However, electrostatic interaction may have a greater effect on organic-As adsorption than on inorganic-As adsorption. Overall, this study provides a new strategy for evaluating As adsorption on MOFs and discovering the underlying decisive factors and adsorption mechanisms, thereby facilitating the investigation of As wastewater treatment.

Superior Removal of Vanadium(V) from Simulated Groundwater with a Fe-Based Metal-Organic Framework Immobilized on Cotton Fibers

A suitable adsorbent is essential in the process of removing hazardous vanadium(V) from actual groundwater. In this work, MIL-88A(Fe)/cotton (MC) was employed to eliminate V(V) from simulated vanadium-contaminated groundwater. The findings demonstrated that MC exhibited an exceptional performance in removing V(V), displaying a maximum adsorption capacity of 218.71 mg g-1. MC exhibits great promise as an adsorbent for V(V) elimination in an extensive pH range spanning 3 to 11. Even in the presence of high levels of competing ions such as Cl-, NO3-, and SO42-, MC demonstrated remarkable specificity in adsorbing V(V). The results of column experiments and co-occurring ions influence tests indicate that MC is a potential candidate for effectively treating actual vanadium-contaminated groundwater. The effluent could meet the vanadium content restriction of 50 μg L-1 required in China's drinking water sources. Regeneration of MC can be performed easily without experiencing significant capacity loss. The results obtained from this research indicate the promising potential of MC in mitigating vanadium pollution.

An efficient synthesis and characterization of La@MOF-808: A promising strategy for effective arsenic ion removal from water

Addressing serious waterborne arsenic issues, for the first time, lanthanum-doped MOF-808 (La@MOF-808) has been developed to remove total arsenic (Total As) and arsenite [As(III)] from water. This study involves the solvothermal synthesis of La@MOF-808, its characterization via FTIR, XRD, TGA, and SEM, in which distinct physicochemical attributes were identified, and the adsorption capacity of arsenic ions. The saturated adsorption capacity of La@MOF-808 for Total As and As(III) reached 282.9 mg g-1 and 283.5 mg g-1, as compared to 229.7 mg g-1 and 239.1 mg g-1 for pristine MOF-808, respectively. XRD and ATR-FTIR analyses underscored the central roles of electrostatic interactions and hydroxyl groups in the pollutant adsorption process. The impact of temperature, concentration, pH, and exposure duration times on adsorption performance was thoroughly investigated. The Langmuir model showed the maximum adsorption capacities (qmax) of La@MOF-808 was 307.7 mg g-1 for Total As and 325.7 mg g-1 for As(III), surpassing those of MOF-808 adsorbent, which suggests that monolayer adsorption occurred. Optimal adsorption was observed in a pH range of 2.0-7.0, and thermodynamic studies classified the process as spontaneous and endothermic. The adsorbent retains high capacity across repeated cycles, outperforming many standard adsorbents. Lanthanum doping markedly enhances MOF-808's arsenic removal, underscoring its potential for water treatment.

A disposable and sensitive sensor based on a ZIF-8@graphene modified carbon paper electrode for the quantitative determination of luteolin

Rapid and accurate determination of luteolin is of great significance for pharmaceutical quality control. Herein, a disposable and sensitive luteolin sensor was fabricated by a hydrothermal method with carbon paper as substrate where ZIF-8 grew on GR in situ. Notably, the large specific surface area of ZIF-8 provided active sites on the electrode surface and the ability of GR to promote electron transfer greatly improved the sensitivity towards the oxidation of luteolin. Under the optimum conditions, the ZIF-8@GR/CP showed excellent detection performance for luteolin with a linear detection range of 0.04-3.2 μM and 3.2-120 μM, with LOD of 12 nM (S/N = 3). Furthermore, this disposable and sensitive sensor was successfully applied for the quantitative detection of luteolin in a capsule of Lamiophlomis rotata.

Characterization of an Iron-Copper Bimetallic Metal-Organic Framework for Adsorption of Methyl Orange in Aqueous Solution

Iron-based organic frame material MIL-53 (Fe) was synthesized by the hydrothermal method with Cu2+ incorporated to obtain bimetallic composite MIL-53 (Fe, Cu). The structure and morphology of the material were characterized by SEM, XRD, BET, FTIR, XPS, and zeta potential. The adsorption performance of MIL-53 (Fe, Cu) on methyl orange was tested under a variety of conditions, including the effects of pH and material dosage, by the static adsorption test. The results show that under the condition of pH = 7, a temperature of 30°C, and an adsorbent dosage of 20 mg, the removal rate of MIL-53 (Fe, Cu) for methyl orange can reach more than 96% within 4 h, and the maximum adsorption capacity after fitting by the thermodynamic model can reach 294.43 mg/g, showing the excellent adsorption performance of MIL-53 (Fe, Cu) on methyl orange. In addition, by exploring the adsorption mechanism of MIL-53 (Fe, Cu) on methyl orange, it is found that the adsorption of MIL-53 (Fe, Cu) on methyl orange depends on chemical adsorption, as evidenced by combining Fe3+ and Cu2+ in the material with methyl orange molecules to form complexes to achieve adsorption. While the specific surface area of the material had no obvious effect on adsorption, the effects of pH, temperature, and concentration were explored. At a pH of 6.5, greater adsorption occurred at higher temperatures, as determined by thermodynamic model fitting, as well as with higher initial methyl orange molecule concentration.

Silk nanofibrils-MOF composite membranes for pollutant removal from water

Membrane separation technology is considered an effective strategy to remove pollutants in sewage. However, it remains a significant challenge to fabricate inexpensive membranes with high purification efficiency. Therefore, the present study proposes the integration of silk nanofibrils (SNFs) and polydopamine⊂metal-organic framework (PDA⊂MOF) nanoparticles to prepare self-supporting membranes, which can effectively intercept nanoparticle pollutants through the size exclusion effect and can strongly adsorb organic dyes and metal ions by SNF. In addition, PDA⊂MOF enables these membranes to adsorb small molecules and heavy metal ions during the filtration process, thereby effectively removing various pollutants from sewage. The integration of size-exclusion and adsorption capabilities enables the SNF/PDA⊂MOF membrane to remove nanoparticles, small-molecule dyes, heavy metal ions, and radioactive elements. This work provides a rational approach for the design and development of the next generation of water treatment membranes and is expected to be used in environmental, food-related, and biomedical fields.

Aqueous Pb(II) Removal Using ZIF-60: Adsorption Studies, Response Surface Methodology and Machine Learning Predictions

Zeolitic imidazolate frameworks (ZIFs) are increasingly gaining attention in many application fields due to their outstanding porosity and thermal stability, among other exceptional characteristics. However, in the domain of water purification via adsorption, scientists have mainly focused on ZIF-8 and, to a lesser extent, ZIF-67. The performance of other ZIFs as water decontaminants is yet to be explored. Hence, this study applied ZIF-60 for the removal of lead from aqueous solutions; this is the first time ZIF-60 has been used in any water treatment adsorption study. The synthesized ZIF-60 was subjected to characterization using FTIR, XRD and TGA. A multivariate approach was used to investigate the effect of adsorption parameters on lead removal and the findings revealed that ZIF-60 dose and lead concentration are the most significant factors affecting the response (i.e., lead removal efficiency). Further, response surface methodology-based regression models were generated. To further explore the adsorption performance of ZIF-60 in removing lead from contaminated water samples, adsorption kinetics, isotherm and thermodynamic investigations were conducted. The findings revealed that the obtained data were well-fitted by the Avrami and pseudo-first-order kinetic models, suggesting that the process is complex. The maximum adsorption capacity (q_max) was predicted to be 1905 mg/g. Thermodynamic studies revealed an endothermic and spontaneous adsorption process. Finally, the experimental data were aggregated and used for machine learning predictions using several algorithms. The model generated by the random forest algorithm proved to be the most effective on the basis of its significant correlation coefficient and minimal root mean square error (RMSE).

Composite beads from chitosan and zeolitic imidazolate framework-8 for the adsorption and photocatalytic degradation of reactive red 141

This study describes the fabrication of composite beads comprising chitosan and zeolitic imidazolate framework-8 (ZIF-8) as a natural biodegradable dye adsorbent and support for ZnO photocatalyst. Chitosan beads were cross-linked with trisodium citrate dihydrate to enhance the adsorption capacity for the reactive red 141 dye (RR141). The ability was further improved by adding ZIF-8. The optimum loading was 2.5%, and the adsorption equilibrium was reached within 2 h. The maximum adsorption capacity of the composite beads was 6.51 mg g-1 at pH 4 when an initial concentration of 1000 mg L-1 was used. The pseudo-second-order kinetics model and the Langmuir isotherm model best described the adsorption process. The composite beads could also adsorb dyes like reactive black, Congo red, direct yellow, reactive orange, rhodamine B, crystal violet, and methylene blue (MB). Thermal stability was significantly improved after coating the surface of the 2.5% ZIF beads with a ZnO photocatalyst. After UV irradiation for 5 h, the photocatalytic beads containing 2.59 weight percent of ZnO could decolorize 99% of MB and 90% of RR141 dyes with a degradation rate of 0.6032 h-1 and 0.3198 h-1, respectively. Furthermore, the photocatalytic beads remained effective for at least ten consecutive cycles.

Enhanced arsenite removal from water using zirconium-ferrocene MOFs coupled with peroxymonosulfate:oxidation and multi-sites adsorption mechanism

The efficient removal of arsenite (As(III)) poses a significant challenge to traditional water treatment technologies due to its high toxicity and mobility. In this work, multifunctional Zirconium-Ferrocene Metal Organic Framework (ZrFc-MOF) fabricated with redox-active 1,1-ferrocene dicarboxylic acid ligands and Zr⁴⁺ precursors were elaborated to achieve remarkably enhanced As(III) removal via activation by peroxymonosulfate (PMS). The adsorption affinity coefficient increased from 0.097 to 2.035 L mg^-1 and the maximum adsorption capacity increased from 59.79 to 111.34 mg g^-1 compared with that without PMS. Besides the conventional homogeneous PMS oxidation and the following adsorption through Zr-O clusters of ZrFc-MOFs, the enhanced As(III) removal synergistic combines the oxidation mechanism of As(III) by reactive oxygen species (•OH, SO₄^•-, O₂^•- and ¹O₂) formed in Ferrocene (Fc) activating PMS process with the simultaneous formed extra adsorption sites of Ferrocenium (Fc⁺). PMS also help ZrFc-MOF to avoid destruction in harsh alkaline condition, making the effluent in this advanced treatment meet the World Health Organization (WHO) threshold of 10 μg L^-1 over a wide range of initial pH (2-11) with high selectivity and durability. These results indicate that this novel Fc-based MOFs activating PMS system has potential applicability for As(III) in oxidation and selectively capturing in the water environment.

FeSx@MOF-808 composite for efficient As(III) removal from wastewater: behavior and mechanism

Arsenic is extremely toxic to humans with water as its carrier. One challenge for arsenic control is the complete elimination of As(III) due to its high toxicity, mobility, and solubility. Herein, an active FeS_x@MOF-808 composite was fabricated to enhance the As(III) removal for wastewater remediation. The FeS_x@MOF-808 showed better As(III) adsorptive performance (Q_e = 73.60 mg/g) compared with Fe₂S₃ (Q_e=12.38 mg/g), MOF-808 (Q_e = 27.85 mg/g), and Fe@MOF-808 (Q_e=34.26 mg/g). This can be attributed to an improved porous structure provided by MOF-808 and abundant reactive sites provided by FeS_x. Calculated by the Langmuir model (R² =0.9965), the maximum adsorption capacity (Q_max) of FeS_x@MOF-808 for As(III) removal at 298 K and pH = 7 was 203.28 ± 6.43 mg/g, which is beyond most of the traditional materials and MOFs. Additionally, FeS_x@MOF-808 exhibited good stability in a wide pH range (1-13). Results also showed that the different Fe/S ratios (1:0-1:8) and FeS_x loading amount (0.00625-0.25 mmol) have effects on the FeS_x@MOF-808 performance. By kinetics studies, XPS, and DFT calculation, the mechanisms for arsenic by FeS_x@MOF-808 were proposed. Multiple reaction mechanisms combine the adsorption by the MOF-808 support, the co-precipitation of iron oxides via hydroxyl (Fe-OH) groups, and most importantly, the precipitation through the break of Fe-S and the bond of As-S.

Atomic layer encapsulation of ferrocene into zeolitic imidazolate framework-67 for efficient arsenic removal from aqueous solutions

Arsenic (As(V))-contaminated water is a major global threat to human health and the ecosystem because of its enormous toxicity, carcinogenicity, and high distribution in water streams. Thus, As(V) removal in the environmental samples has received considerable attention. Till now, numerous metal-organic framework materials have been used for the As(V) removal from the aqueous medium, but low As(V) removal and instability of the adsorbents have severely cut off their practical applications. In this study, a ferrocene-encapsulated zeolitic imidazolate framework-67 (Fc-ZIF-67) material was synthesized for As(V) removal from an aqueous solution at neutral pH using a simple solution mixing process. The ferrocene encapsulation provides water-stable and structural defects to ZIF-67. Furthermore, the ferrocene molecule and imidazole linker can enhance As(V) adsorption via both chemisorption and physisorption. The novel Fc-ZIF-67 adsorbent exhibited superior As(V) adsorption performance with an adsorption capacity of 63.29 mg/g at neutral pH. The Langmuir and Freundlich isotherm models were also used to analyze adsorption behavior.

An efficient metal-organic framework-based drug delivery platform for synergistic antibacterial activity and osteogenesis

Bone implants for clinical application should be endowed with antibacterial activity, biocompatibility, and even osteogenesis-promoting properties. In this work, metal-organic framework (MOF) based drug delivery platform was used to modify titanium implants for improved clinical applicability. Methyl Vanillate@Zeolitic Imidazolate Framework-8 (MV@ZIF-8) was immobilized on the polydopamine (PDA) modified titanium. The sustainable release of the Zn²⁺ and MV causes substantial oxidative damage to Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The increased reactive oxygen species (ROS) significantly up-regulates the expression of oxidative stress and DNA damage response genes. Meanwhile, the structural disruption of lipid membranes caused by the ROS, the damage caused by Zinc active sites and the damage accelerated by the MV are both involved in inhibiting bacterial proliferation. The up-regulated expression of the osteogenic-related genes and proteins indicated that the MV@ZIF-8 could effectively promote the osteogenic differentiation of the human bone mesenchymal stem cells (hBMSCs). RNA sequencing and Western blotting analysis revealed that the MV@ZIF-8 coating activates the canonical Wnt/β-catenin signaling pathway through the regulation of tumor necrosis factor (TNF) pathway, thereby promoting the osteogenic differentiation of the hBMSCs. This work demonstrates a promising application of the MOF-based drug delivery platform in bone tissue engineering.

Synthesis and characterization of zeolitic imidazolate frameworks nanocrystals and their application in adsorption and detoxification of gossypol in cottonseed oil

Three zeolitic imidazolate frameworks (ZIFs) materials including ZIF-8 (H₂O), ZIF-8 (methanol) and ZIF-L were synthesized and applied to the adsorption and detoxification of gossypol in cottonseed oil. The characterization results showed three ZIFs materials had good crystal structure, thermal stability and high specific surface area. The ZIFs materials had also good adsorption performance for gossypol and their adsorption processes can be described by the pseudo-second-order adsorption kinetic models. Adsorption isotherm analysis indicated that Langmuir model expressed a better conformity than Freundlich model, suggesting that the adsorption was the single-layer adsorption on a uniform site. Furthermore, the spiked experiment showed that the detoxification rate of ZIFs materials in vegetable oil was 72-86 %. A satisfied detoxification rate of 50-70 % was found in the detoxification experiment of real cottonseed oil samples. Therefore, these results demonstrate the great potential of using ZIFs materials as detoxification in cottonseed oil.

Enhanced antibacterial effect and biodegradation of coating via dual-in-situ growth based on carboxymethyl cellulose

The lack of antimicrobial effect of commercial paper coating for food packaging makes it difficult to prevent food spoilage and harms the environment by non-biodegradation. Herein, carboxymethyl cellulose (CMC) provides negatively charged sites for anchoring Ag⁺ and Zn²⁺ to grow AgNPs and ZIF-8 in situ on its molecular chains. The ZIF-8/AgNPs@CMC paper coating has excellent synergistic antibacterial activity to prolong the shelf-life of food. It not only has good thermal stability but binds closely to the paper and its adhesion force reaches 628.9 nN. Besides, the ZIF-8/AgNPs@CMC coated paper has better mechanical properties, water vapor barrier, and resists water solubility. Interestingly, due to the confinement effect of ZIF-8, the cumulative release of AgNPs after 168 h is only 2.66 % to avoid possible food safety risks. Especially, the coating can be almost biodegraded in the soil after 30 days, which provides the possibility to replace the non-biodegradable coatings in food packaging.

Application of a Novel Au@ZIF-8 Composite in the Detection of Bisphenol A by Surface-Enhanced Raman Spectroscopy

Bisphenol A (BPA) is an endocrine disruptor which is widely present in fish under the influence of environmental pollution. It is essential to establish a rapid detection method for BPA. Zeolitic imidazolate framework (ZIF-8) is a typical metal-organic framework material (MOFs) with a strong adsorption capacity, which can effectively adsorb harmful substances in food. Combining MOFs and surface-enhanced Raman spectroscopy (SERS) can achieve rapid and accurate screening of toxic substances. In this study, a rapid detection method for BPA was established by preparing a new reinforced substrate Au@ZIF-8. The SERS detection method was optimized by combining SERS technology with ZIF-8. The Raman peak at 1172 cm^-1 was used as the characteristic quantitative peak, and the lowest detection concentration of BPA was as low as 0.1 mg/L. In the concentration range of 0.1~10 mg/L, the linear relationship between SERS peak intensity and the concentration of BPA was good, and R² was 0.9954. This novel SERS substrate was proven to have great potential in rapidly detecting BPA in food.

Overview on recent advances of magnetic metal-organic framework (MMOF) composites in removal of heavy metals from aqueous system

Developing a novel, simple, and cost-effective analytical technique with high enrichment capacity and selectivity is crucial for environmental monitoring and remediation. Metal-organic frameworks (MOFs) are porous coordination polymers that are self-assembly synthesized from organic linkers and inorganic metal ions/metal clusters. Magnetic metal-organic framework (MMOF) composites are promising candidate among the new-generation sorbent materials available for magnetic solid-phase extraction (MSPE) of environmental contaminants due to their superparamagnetism properties, high crystallinity, permanent porosity, ultrahigh specific surface area, adaptable pore shape/sizes, tunable functionality, designable framework topology, rapid and ultrahigh adsorption capacity, and reusability. In this review, we focus on recent scientific progress in the removal of heavy metal ions present in contaminated aquatic system by using MMOF composites. Different types of MMOFs, their synthetic approaches, and various properties that are harnessed for removal of heavy metal ions from contaminated water are discussed briefly. Adsorption mechanisms involved, adsorption capacity, and regeneration of the MMOF sorbents as well as recovery of heavy metal ions adsorbed that are reported in the last ten years have been discussed in this review. Moreover, particular prospects, challenges, and opportunities in future development of MMOFs towards their greener synthetic approaches for their practical industrial applications have critically been considered in this review.

The Effect of Surface Composition on the Selective Capture of Atmospheric CO2 by ZIF Nanoparticles: The Case of ZIF-8

We performed theoretical studies of CO₂ capture in atmospheric conditions by the zeolitic imidazolate framework-8 (ZIF-8) via classical Monte Carlo (MC) simulations with Metropolis sampling and classical molecular dynamics (MD) simulations in the NVT and NPT ensembles and different thermodynamic conditions. The ZIF-8 framework was described by varying unit cell dimensions in the presence of pure gases of CO₂, N₂, O₂, Ar, and H₂O steam as well as binary mixtures of CO₂:N₂ and CO₂:H₂O in s 1:1 concentration. Different chemical compositions of the framework surface was considered to provide an accurate treatment of charge and charge distribution in the nanoparticle. Hence, surface groups were represented as unsaturated zinc atom (Zn⁺²), 2-methylimidazole (mImH), and deprotonated 2-methylimidazole (mIm^-). Force field reparameterization of the surface sites was required to reproduce the interactions of the gas molecules with the ZIF-8 surface consistent with quantum mechanics (QM) calculations and Born-Oppenheimer molecular dynamics (BOMD). It was observed that ZIF-8 selectively captures CO₂ due to the negligible concentrations of N₂, O₂, Ar, and H₂O. These molecules spontaneously migrate to the inner pores of the framework. At the surface, there is a competitive interaction between H₂O, CO₂, and N₂, for the positively charged ZIF-8 nanoparticle with a large binding energy advantage for water molecules (on average -62, -15, and -8 kcal/mol respectively). For the neutral ZIF-8 nanoparticle, the water molecules dominate the interactions due to the occurrence of hydrogen bond with the imidazolate groups at the surface. Simulations of binary mixtures of CO₂/water steam and CO₂/N₂ were performed to investigate binding competition between these molecules for the framework positively charged and neutral surfaces. It was found that water molecules drastically block the interaction between CO₂ molecules and the framework surface, decreasing CO₂ capture in the central pore, and CO₂ molecules fully block the interaction between N₂ molecules and the framework. These findings show that CO₂ capture by ZIF-8 is possible in atmospheric environments only upon dehydration of the atmospheric gas. It further shows that ZIF-8 capture of CO₂ from the atmospheric environment is dependent on thermodynamic conditions and can be increased by decreasing temperature and/or increasing pressure.

A Brief Review of Recent Results in Arsenic Adsorption Process from Aquatic Environments by Metal-Organic Frameworks: Classification Based on Kinetics, Isotherms and Thermodynamics Behaviors

In nature, arsenic, a metalloid found in soil, is one of the most dangerous elements that can be combined with heavy metals. Industrial wastewater containing heavy metals is considered one of the most dangerous environmental pollutants, especially for microorganisms and human health. An overabundance of heavy metals primarily leads to disturbances in the fundamental reactions and synthesis of essential macromolecules in living organisms. Among these contaminants, the presence of arsenic in the aquatic environment has always been a global concern. As (V) and As (III) are the two most common oxidation states of inorganic arsenic ions. This research concentrates on the kinetics, isotherms, and thermodynamics of metal-organic frameworks (MOFs), which have been applied for arsenic ions uptake from aqueous solutions. This review provides an overview of the current capabilities and properties of MOFs used for arsenic removal, focusing on its kinetics and isotherms of adsorption, as well as its thermodynamic behavior in water and wastewater.

Preparation and Adsorption Performance Study of Graphene Quantum Dots@ZIF-8 Composites for Highly Efficient Removal of Volatile Organic Compounds

Based on the large specific surface area and excellent adsorption potential of graphene quantum dots (GQDs) and zeolitic imidazolate framework-8 (ZIF-8) materials, a GQDs@ZIF-8 composite was constructed to achieve optimal matching of the microstructure and to acquire efficient adsorption of volatile organic compounds (VOCs). GQDs and ZIF-8 were synthesized and then compounded by the solution co-deposition method to obtain GQDs@ZIF-8 composites. GQDs were uniformly decorated on the surface of the ZIF-8 metal-organic framework (MOF), effectively restraining the agglomeration, improving the thermal stability of ZIF-8 and forming abundant active sites. Thus, the VOC removal percentage and adsorption capacity of the GQDs@ZIF-8 composites were significantly improved. Toluene and ethyl acetate were chosen as simulated VOC pollutants to test the adsorption performance of the composites. The results showed that, after the addition of GQDs, the adsorption property of GQDs@ZIF-8 composites for toluene and ethyl acetate was obviously improved, with maximum adsorption capacities of 552.31 mg/g and 1408.59 mg/g, respectively, and maximum removal percentages of 80.25% and 93.78%, respectively, revealing extremely high adsorption performance. Compared with raw ZIF-8, the maximum adsorption capacities of the composites for toluene and ethyl acetate were increased by 53.82 mg/g and 104.56 mg/g, respectively. The kinetics and isotherm study revealed that the adsorption processes were in accordance with the pseudo-first-order kinetic model and the Freundlich isotherm model. The thermodynamic results indicated that the adsorption process of the GQDs@ZIF-8 composites was a spontaneous, endothermic and entropy increase process. This study provides a new way to explore MOF-based adsorption materials with high adsorption capacity which have broad application prospects in VOC removal fields.

Zero-valent bimetallic catalyst/absorbent for simultaneous facilitation of MgSO3 oxidation and arsenic uptake

Cobalt (Co)-based catalysts can efficiently reduce the heat waste from sulfate concentration by enhancing sulfite oxidation during wet flue gas desulfurization system. However, arsenic (As) can poison such catalysts and migrate into the sulfate by-products, resulting in severe secondary pollution. In this study, a zero-valent Co/iron (Fe)-based nanoparticle (NZV-Co₂Fe₁) was fabricated and applied as a bifunctional catalyst/adsorbent. The catalytic stability of the Co-based catalyst was enhanced by the introduction of Fe because the poisonous effect of As was substantially suppressed because of the high adsorption capacity of Fe for As. Compared with the noncatalytic benchmark, the presence of 0.5 g/L NZV-Co₂Fe₁ can increase the rate of MgSO₃ oxidation by approximately 12-fold even at a high concentration of As (2.5 mg/L). The Langmuir model was fitted to the As adsorption isotherms, indicating that As uptake is a single-layer adsorption process. The pseudo-second-order kinetic model indicated that As was removed through chemisorption. The oxidation pathway of As(III) involves reactive radicals (mainly OH, SO₄^- and SO₅^-) and ligand-to-metal charge transfer between SO₃^2- and Co²⁺. The availability of MgSO₃ improved the removal efficiency at high concentrations of As(III) (1 mg/L). These results indicate that using NZV-Co₂Fe₁ as a catalyst to purify the by-products of flue gas desulfurization can effectively prevent secondary pollution.

Machine learning approaches for predicting arsenic adsorption from water using porous metal-organic frameworks

Arsenic in drinking water is a serious threat for human health due to its toxic nature and therefore, its eliminating is highly necessary. In this study, the ability of different novel and robust machine learning (ML) approaches, including Light Gradient Boosting Machine (LightGBM), Extreme Gradient Boosting, Gradient Boosting Decision Tree, and Random Forest was implemented to predict the adsorptive removal of arsenate [As(V)] from wastewater over 13 different metal–organic frameworks (MOFs). A large experimental dataset was collected under various conditions. The adsorbent dosage, contact time, initial arsenic concentration, adsorbent surface area, temperature, solution pH, and the presence of anions were considered as input variables, and adsorptive removal of As(V) was selected as the output of the models. The developed models were evaluated using various statistical criteria. The obtained results indicated that the LightGBM model provided the most accurate and reliable response to predict As(V) adsorption by MOFs and possesses R², RMSE, STD, and AAPRE (%) of 0.9958, 2.0688, 0.0628, and 2.88, respectively. The expected trends of As(V) removal with increasing initial concentration, solution pH, temperature, and coexistence of anions were predicted reasonably by the LightGBM model. Sensitivity analysis revealed that the adsorption process adversely relates to the initial As(V) concentration and directly depends on the MOFs surface area and dosage. This study proves that ML approaches are capable to manage complicated problems with large datasets and can be affordable alternatives for expensive and time-consuming experimental wastewater treatment processes.

Metal-Organic Framework Aerogel for Full pH Range Operation and Trace Adsorption of Arsenic in Water

The UiO-66-NH₂ aerogel has been designed to remove As(III) and As(V) in the full pH range with a long lifetime. The efficiency of the aerogel for trace removal from river water samples at the sub-ppb level has been demonstrated. The feasibility for practical uses has been evaluated by breakthrough experiments operated at a liquid hourly space velocity (LHSV) of 38 h^-1 using a real water sample with a significant capacity of 284 mg g^-1. The UiO-66-NH₂ aerogel provides a lifetime of over 600 min, which is one of the highest lifetimes among the reported adsorbents for arsenic decontamination.

Removal of Benzene and Toluene from Synthetic Wastewater by Adsorption onto Magnetic Zeolitic Imidazole Framework Nanocomposites

Considering the risk associated with exposure to benzene and toluene in water resources, researchers have been motivated to conduct studies to remove them from aqueous solutions. Thus, by performing the present study, the potential of Fe3O4/zeolite imidazolate framework nanoparticles (Fe3O4@ZIF-8) was evaluated for the adsorption of benzene and toluene. Accordingly, the solution pH, Fe3O4@ZIF-8 dosage, mixing time, concentration of benzene and toluene, and temperature, were the parameters considered for conducting the batch experiments, for which their effect on adsorption efficiency was evaluated. Our conducted experiments introduced the neutral pH as the best pH range to obtain the maximum removal. Fitting the adsorption data into the various models revealed the aptness of the Langmuir isotherm equation in describing experimental information and highest adsorption capacity; for benzene it was 129.4, 134.2, 137.3, and 148.2 mg g-1, but for toluene it was 118.4, 125.2, 129.6, and 133.1 mg g-1, for temperature 20, 30, 40, and 50 °C, respectively. Using obtained optimal conditions, the adsorption efficiencies of benzene and toluene were obtained to be 98.4% and 93.1%, respectively. Kinetic studies showed acceptable coefficients for PSO kinetics and confirmed its suitability. Also, the recyclability results showed that for six consecutive periods of the adsorption-desorption process, the percentage of removal decreased by only 6% for benzene and toluene. Moreover, calculating thermodynamic parameter changes for benzene and toluene removal confirmed the favorability and spontaneity of the studied process and its endothermic nature. Considering the above findings, Fe3O4@ZIF-8 was found to be an operative adsorbent for removing pollutants.

Tuning the structure of cerium-based metal-organic frameworks for efficient removal of arsenic species: The role of organic ligands

The ability of organic ligands to change the structure of metal-organic frameworks (MOFs) in nature and influence their adsorption efficiency for arsenic species is enormous. The current work was designed to investigate the adsorption performance of cerium-based MOFs with tunable structures through the use of organic ligands (Ce-MOF-66 and Ce-MOF-808) towards arsenic species from water. The structural features of Ce-MOF-66 and Ce-MOF-808 with varying crystallinity, morphology, particle size, and surface area are considerably altered by organic ligands tuning, resulting in clearly distinct arsenate (As (V)) and arsenite (As (III)) adsorption capabilities. The experimental results showed that the Langmuir adsorption capacities of As (V) by Ce-MOF-66 and Ce-MOF-808 reached 355.67 and 217.80 mg/g, respectively, while for As (III) were 5.52 and 402.10 mg/g for Ce-MOF-66 and Ce-MOF-808, respectively. Except for the impact of PO₄^3- on As (V), co-existing ions had no significant influence on adsorption, illustrating the high selectivity. Furthermore, to understand the structure and adsorption mechanism, two adsorbents were characterized by powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, specific surface area, Fourier transform infrared and X-ray photoelectron spectroscopy, in which identified that unsaturated sites and ligand exchange were the main adsorption mechanisms of As (V) and As (III). Overall, this research presents a novel approach for developing high-performance Ce-derived MOFs adsorbents to capture arsenic species.

Removal of Arsenic from Wastewater by Using Nano Fe3O4/Zinc Organic Frameworks

Efficient removal of arsenic in wastewater is of fundamental importance due to the increasingly severe arsenic pollution. In this study, a new composite adsorbent (Fe₃O₄@ZIF-8) for As(V) removal from wastewater was synthesized by encapsulating magnetic Fe₃O₄ nanoparticles into metal organic frameworks. In order to evaluate the feasibility of Fe₃O₄@ZIF-8 as an adsorbent for As(V) removal, the adsorption properties of Fe₃O₄@ZIF-8 were systematically explored by studying the effects of dosage, pH, adsorption isotherm, kinetics, and thermodynamics. Additionally, the characterization of Fe₃O₄@ZIF-8 before and after adsorption was analyzed thoroughly using various tests including SEM-EDS, XPS, BET, XRD, TG, FTIR, and the properties and arsenic removal mechanism of the Fe₃O₄@ZIF-8 were further studied. The results showed that the Fe₃O₄@ZIF-8 has a specific surface area of 316 m²/g and has excellent adsorption performance. At 25 °C, the initial concentration of arsenic was 46.916 mg/L, and pH 3 was the optimum condition for the Fe₃O₄@ZIF-8 to adsorb arsenic. When the dosage of the Fe₃O₄@ZIF-8 was 0.60 g/L, the adsorption of arsenic by the Fe₃O₄@ZIF-8 can reach 76 mg/g, and the removal rate can reach 97.20%. The adsorption process of arsenic to the Fe₃O₄@ZIF-8 can be well described by the Langmuir isotherm model and the second-order kinetic equation. At pH 3 and temperature 298 K, the maximum adsorption capacity of arsenic by the Fe₃O₄@ZIF-8 was 116.114 mg/g. Through the analysis of thermodynamic parameters, it is proved that the adsorption process of arsenic by the Fe₃O₄@ZIF-8 is a spontaneous endothermic reaction. The Fe₃O₄@ZIF-8 has broad prospects for removing As(V) pollution in wastewater, because of its strong adsorption capacity, good water stability, and easy preparation.

A comprehensive review on water remediation using UiO-66 MOFs and their derivatives

Metal-organic frameworks (MOFs) are a versatile class of porous materials offering unprecedented scope for chemical and structural tunability. On account of their synthetic versatility, tunable and exceptional host-guest chemistry they are widely utilized in many prominent water remediation techniques. However, some of the MOFs present low structural stabilities specifically in aqueous and harsh chemical conditions which impedes their potential application in the field. Among the currently explored MOFs, UiO-66 exhibits structural robustness and has gained immense scientific popularity. Built with a zirconium-terephthalate framework, the strong Zr-O bond coordination contributes to its stability in aqueous, chemical, and thermal conditions. Moreover, other exceptional features such as high surface area and uniform pore size add to the grand arena of porous nanomaterials. As a result of its stable nature, UiO-66 offers relaxed admittance towards various functionalization, including synthetic and post-synthetic modifications. Consequently, the adsorptive properties of these highly stable frameworks have been modulated by the addition of various functionalities. Moreover, due to the presence of catalytically active sites, the use of UiO-66 has also been extended towards the degradation of pollutants. Furthermore, to solve the practical handling issues of the crystalline powdered forms, UiO-66 has been incorporated into various membrane supports. The incorporation of UiO-66 in various matrices has enhanced the rejection, permeate flux, and anti-fouling properties of membranes. The combination of such exceptional characteristics of UiO-66 MOF has expanded its scope in targeted purification techniques. Subsequently, this review highlights the role of UiO-66 in major water purification techniques such as adsorption, photocatalytic degradation, and membrane separation. This comprehensive review is expected to shed light on the existing developments and guide the inexhaustible futuristic scope of UiO-66 MOF.