Chitosan-poly(vinyl alcohol)/attapulgite nanocomposites for copper(II) ions removal: pH dependence and adsorption mechanisms

Fluorescent cellulose nanofibrils hydrogels for sensitive detection and efficient adsorption of Cu2+ and Cr6

Increasing chromium and copper pollution poses a significant threat to the global environment and human health. It is crucial to detect and remove Cu (II) and Cr (VI) from water. Cellulose nanofibrils (CNF)-based hydrogels were a natural, abundant, and biocompatible material that has attracted great attention for bio adsorption applications. In this work, a new fluorescent CNF-based hydrogel (PAA-CNF-W) was prepared for the high-efficiency adsorption and sensitive detection of Cu (II) and Cr (VI). CNF was introduced as a natural backbone to construct a three-dimensional porous structure, which increased the specific surface area and provided additional active sites, exhibiting excellent adsorption properties for Cu (II) (159.24 mg/g) and Cr (VI) (173.87 mg/g). Moreover, the synthesized dansyl chloride derivatives with fluorescent properties were introduced to the hydrogel and formed chelates with the metals leading to fluorescence quenching. PAA-CNF-W hydrogels showed high sensitivity to the detection limit (LOD) of Cu (II) (28.70 mg/L) and Cr (VI) (1.45 mg/L). The kinetic study revealed that pseudo-second order kinetics was the best-fitting model. The Langmuir isotherm was the best adjustment model. The study provides a new idea for efficient detection and removal of Cu (II) and Cr (VI) from wastewater by cellulose materials.

Adsorption of Pb(II) in water by modified chitosan-based microspheres and the study of mechanism

In this study, a fresh three-dimensional microsphere adsorbent (CATP@SA3) was successfully synthesized by Attapulgite (ATP) and combining Chitosan (CS), incorporating them into a Sodium alginate (SA) solution, and crosslinking them in a CaCl2 solution. Multiple analyses, including XRD, TGA, FTIR, XPS, SEM-EDS, and BET were utilized to comprehensively characterize the structural makeup of CATP@SA3. These analyses revealed the presence of beneficial functional groups like hydroxyl, amino, and carboxyl groups that enhance the adsorption efficiency in adsorption procedures. CATP@SA3 was evaluated by studying different factors, including material ratio, contact time, dosage, solution pH, Pb(II) concentration, temperature, ionic strength, and aqueous environment. Three adsorption models, including kinetic, isotherm, and thermodynamic, were fitted to the experimental data. The findings demonstrated that the maximum Pb(II) adsorption capacity of CATP@SA3 was 1081.36 mg/g, with a removal rate that exceeded 70 % even after 5 cycles of use. Furthermore, correlation adsorption models revealed that the adsorption process of Pb(II) with CATP@SA3 was driven by a chemical predominantly reaction.

A systematic review on carbohydrate biopolymers for adsorptive remediation of copper ions from aqueous environments-Part B: Isotherms, thermokinetics and reusability

The presence of copper in aquatic environment is a serious threat for human health and ecosystem conservation. Adsorption is a powerful, operable and economic method for remediation of copper ions from aqueous phase. Carbohydrate biopolymers have emerged as promising, effective and environmental-friendly adsorbents for copper remediation. In part A of this review, different types of carbohydrate biopolymer adsorbents were surveyed focusing on prevalent and novel synthesis and modification methods. In current work (part B of the review), isothermal, thermodynamic and kinetic aspects of the copper adsorption by carbohydrate-based adsorbents as well as the regeneration and reusability of the biopolymer adsorbents are overviewed. Adsorption capacity, time required for equilibrium (adsorption rate), thermal-sensitivity of the adsorption, favorability extent, and sustainability of the adsorbents and adsorption processes are valuable and useful outcomes, resulted from the thermokinetic and reusability investigations. Such considerations are critical for the process design and scale up regarding technical, economical and sustainability of the adsorption process.

Investigation of interaction behaviours of cesium and strontium ions with engineering barrier material to prevent leakage to environmental

This study deals with performance of removal of cesium (Cs⁺) and strontium (Sr²⁺) ions from synthetic aqueous solution using amino pyridine sulfone amid resin as a barrier material for nuclear waste storage areas to reduce environmental risk. The effects of adsorbate concentration, temperature and contact time on the efficiencies of the engineering barrier material for Cs⁺ and Sr²⁺ ions were investigated and evaluated. It was found that total adsorption capacity was higher for cesium ions than strontium ions. Dubinin-Radushkevich (D-R) isotherm model was well fitted to the adsorption data for both ions. The micropore capacity of the barrier material was found as 4.20 mg for strontium ions and 5.40 mg for cesium ions. ΔH values were indicated that the interaction process is exothermic for both ions. The positive value of entropy for both ions show that randomness at the solid-solution interface increased. Pseudo-second-order model was well fitted the kinetic data.

Synthesis of a chitosan/polyvinyl alcohol/activate carbon biocomposite for removal of hexavalent chromium from aqueous solution

In this study, a biocomposite of chitosan/poly vinyl alcohol/activated carbon was synthesized and used for hexavalent chrome removal from aqueous solution. The synthesized adsorbent was characterized by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared (FTIR) analysis. The effect of important variables such as pH, concentration, contact time, temperature, and adsorbent dosage was investigated. The value of pH_PZC for the adsorbent was evaluated at 4.9. Results showed that adsorption of chrome onto the adsorbent follows the Langmuir isotherm model and has a pseudo-second-order kinetic model. The maximum capacity of chrome adsorption was determined 109.89 (mg/g) according to the Langmuir isotherm model. According to adsorption results, the removal percentage of chrome increases with increasing the activated carbon content in the biocomposite, the adsorbent dosage, and decreasing the initial chrome concentration, pH, and temperature. The results showed that the synthesized adsorbent can be used as an effective adsorbent for chrome removal from aqueous solutions.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Preparation of PVDF/Hyperbranched-Nano-Palygorskite Composite Membrane for Efficient Removal of Heavy Metal Ions

In this work, three kinds of hyperbranched polyamidoamine-palygorskite (PAMAM-Pal) were designed and synthesized by grafting the first generation polyamidoamine (G1.0 PAMAM), G2.0 PAMAM and G3.0 PAMAM onto Pal surfaces, respectively. Then, these PAMAM-Pals were used as additives to prepare polyvinylidene fluoride (PVDF)/hyperbranched polyamidoamine-palygorskite bicomponent composite membranes. The structures of the composite membranes were characterized by Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TEM), X-ray photoelectron spectroscopy (XPS), field-emission scanning electronmicroscopy (SEM), atomic force microscope (AFM) and Thermogravimetric analysis (TGA). The adsorption properties of composite membranes to heavy metal ions was studied, and the results found that the maximum adsorption capacities for Cu(II), Ni(II) and Cd(II) could reach 155.19 mg/g, 124.28 mg/g and 125.55 mg/g, respectively, for the PVDF/G3.0 PAMAM-Pal membrane, while only 23.70 mg/g, 17.74 mg/g and 14.87 mg/g could be obtained for unmodified membranes in the same conditions. The high adsorption capacity can be ascribed to the large number of amine-terminated groups, amide groups and carbonyl groups of the composite membrane. The above results indicated that the prepared composite membrane has a high adsorption capacity for heavy metal ions removal in water treatment.

Optimum selective separation of Cu(ii) using 3D ordered macroporous chitosan films with different pore sizes

3DOM-IICF coupled with colloidal crystal template and ion imprinting technology (IIP) was used to absorb copper ions (Cu(ii)) in water. Added polystyrene (PS) micro-spheres to form a three-dimensional ordered macroporous structure.

Preparation and Identification of Optimal Synthesis Conditions for a Novel Alkaline Anion-Exchange Membrane

The physicochemical and mechanical properties of new alkaline anion-exchange membranes (AAEMs) based on chitosan (CS) and poly(vinyl alcohol) (PVA) polymers doped with unsupported copper nanoparticles (NPs) and copper exchanged over different porous materials were investigated regarding ion-exchange capacity (IEC), OH⁻ conductivity, water uptake (WU), water vapor permeability (WVP), and thermal and mechanical resistance. The influence of the type of filler included in different morphologies and filler loading has been explored using copper exchanged materials such as the layered porous titanosilicate AM-4, layered stannosilicate UZAR-S3, and zeolites Y, MOR, and BEA. Compared to commercially available anion-exchange membranes, the best performing membranes in terms of WU, IEC, OH⁻ conductivity and WVP in this study were those containing 10 wt % of Cu-AM-4 and Cu-UZAR-S3, although 10 wt % Cu-MOR provided better mechanical strength at close values of WVP and anion conductivity. It was also observed that when Cu was exchanged in a porous silicate matrix, its oxidation state was lower than when embedded as unsupported metal NPs. In addition, the statistical analysis of variance determined that the electrochemical properties of the membranes were noticeably affected by both the type and filler loading, and influenced also by the copper oxidation state and content in the membrane, but their hydrophilic properties were more affected by the polymers. The largest significant effects were noticed on the water sorption and transport properties, which gives scope for the design of AAEMs for electrochemical and water treatment applications.

Characterization, preparation, and uses of nanomagnetic Fe3O4 impregnated onto fish scale as more efficient adsorbent for Cu2+ ion adsorption

In this research, the Cu²⁺ ion adsorption from aqueous solution was investigated by fish scale (FS) and nanomagnetic (Fe₃O₄) loaded fish scale (MFS) from fishery biomass. We characterized the structure and morphology of synthesized magnetic adsorbent by Fourier transform infrared spectroscopy (FTIR), FESEM, and XRD. The FTIR and XRD tests confirmed the collagen fibers, apatite crystals, and nanomagnetite particles presence in the MFS structure. The isotherm models of Langmuir, Freundlich, and Dubinin-Radushkevich were exerted to the empirical equilibrium data, by which was found that the Langmuir equation have the best fit to the experimental data in comparison to the other isotherm equations. The maximum capacities of monolayer coverage of FS and MFS for adsorption of Cu²⁺ ions were achieved, respectively, 61.73 and 103.1 mg g^-1 based on Langmuir isotherm at 45 °C. It was also discovered that the Cu²⁺ ion adsorption onto MFS was totally a physisorption-controlled process. It was perceived that the model of pseudo-second order rate kinetics also could be applied for predicting of studied adsorption processes. Here, the adsorption was a spontaneous and endothermic process because of the negative and the positive values of ∆G⁰ and ∆H⁰, respectively. The reusability potential of the used adsorbents was studied, so that the results showed an efficiency of 76.5 and 83.92% for FS and MFS, respectively, after four adsorption-desorption cycles.

Preparation of Functionalized Magnetic Fe₃O₄@Au@polydopamine Nanocomposites and Their Application for Copper(II) Removal

Polydopamine (PDA) displays many striking properties of naturally occurring melanin in optics, electricity, and biocompatibility. Another valuable feature of polydopamine lies in its chemical structure that incorporates many functional groups such as amine, catechol and imine. In this study, a nanocomposite of magnetic Fe₃O₄@Au@polydopamine nanopaticles (Fe₃O₄@Au@ PDA MNPs) was synthesized. Carboxyl functionalized Fe₃O₄@Au nanoparticles (NPs) were successfully embedded in a layer of PDA through dopamine oxypolymerization in alkaline solution. Through the investigation of adsorption behavior to Cu(II), combined with high sensitive electrochemical detection, the as-prepared magnetic nanocomposites (MNPs) have been successfully applied in the separation and analysis of Cu(II). The experimental parameters of temperature, Cu(II) concentration and pH were optimized. Results showed that the as-prepared MNPs can reach saturation adsorption after adsorbing 2 h in neutral environment. Furthermore, the as-prepared MNPs can be easily regenerated by temperature control and exhibits a good selectivity compared to other metal ions. The prepared Fe₃O₄@Au@PDA MNPs are expected to act as a kind of adsorbent for Cu(II) deep removal from contaminated waters.

Removal of heavy metal Cu(II) in simulated aquaculture wastewater by modified palygorskite

Palygorskite (PAL) is a good heavy metal adsorbent due to its high surface area, low cost, and environmentally compatibility. But the natural PAL has limited its adsorption capacity and selectivity. In this study, a cost-effective and readily-generated absorbent, l-threonine-modified palygorskite (L-PAL), was used and its performance for Cu(II) removal in simulated aquaculture wastewater was evaluated. After preparation, L-PAL was characterized by using Fourier transform infrared spectroscopy, scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffractometer, X-ray photoelectron spectroscopy, transmission electron microscopy and thermogravimetric analysis. The impacts of pH, adsorbent dosage, contact time, and initial Cu(II) concentration on the adsorption capacity of L-PAL were examined. The Cu(II) adsorption capacity on L-PAL was enhanced almost 10 times than that of raw PAL. The adsorption isotherms of Cu(II) fit the Langmuir isotherms, and the adsorption kinetics was dominated by the pseudo-second-order model. The thermodynamic parameters at four temperatures were calculated, which indicated that the adsorption was spontaneous and endothermic. The adsorption mechanism involves complexation, chelation, electrostatic attraction, and micro-precipitation. Furthermore, L-PAL is shown to have a high regeneration capacity. These results indicate that L-PAL is a cheap and promising absorbent for Cu(II) removal and hold potential to be used for aquaculture wastewater treatment.