Surface modification of graphene oxide by goethite with enhanced tylosin photocatalytic activity under visible light irradiation

MoS2 nanosheets embedded in α-FeOOH as an efficient cathode for enhanced MFC-electro-Fenton performance in wastewater treatment

Microbial fuel cell-electro-Fenton system (MEF) has attracted attention due to refractory organic pollutants removal, where H₂O₂ is in-situ produced without external energy supply. Enhancement of H₂O₂ production and the activation of H₂O₂ to ·OH are the keys to improve degradation performance. Development of bifunctional catalytic cathode is a viable strategy. Herein, the α-FeOOH/MoS₂ nanocomposites was fabricated by a novel facile hydrothermal method based on molybdenite-exfoliated MoS₂ nanosheets suspension, which was used as modified cathode in a MEF system. The obtained α-FeOOH/1 wt%MoS₂ cathode exhibited highest power density of 292.38 mW/m², which was about 3.7 and 1.7 times higher than that of graphite plate and α-FeOOH, respectively. Doping of MoS₂ nanosheets significantly enhanced electrocatalytic activity of the cathode and promoted in-situ H₂O₂ generation. Meanwhile, the exposed reductive Mo⁴⁺ on the surface of MoS₂ could greatly facilitate the conversion cycle of Fe(III)/Fe(II), leading to the efficient activation of H₂O₂ into ·OH. The MEF with α-FeOOH/1 wt%MoS₂ cathode exhibited excellent degradation and mineralization performance for MB, rhodamine B and tetracycline hydrochloride at optimized reaction condition. Furthermore, the MEF can simultaneously achieve MB oxidation and Cr(VI) reduction, and the corresponding removal ratio can reach up to 91.45% and 100%, respectively. Based on simple preparation method as well as recyclability and excellent catalytic property, the α-FeOOH/MoS₂ composite catalyst is considered as a promising MEF cathode for efficient wastewater treatment.

Stabilization and Utilization of Pyrite under Light Irradiation: Discussion of Photocorrosion Resistance

The control of pyrite (FeS₂) oxidation from a source is a problem of great concern on treatment of acid mine drainage (AMD). Compared with air and water, the effect of light on pyrite oxidation has not attracted enough attention. However, we found that pyrite photocorrosion in the light promoted the oxidation of pyrite. Herein, we introduce a method of coating pyrite with graphene oxide (GO), which can inhibit the oxidation and photocorrosion of pyrite while it can also degrade organic pollutants. The characterization results show that a covalent bond forms between the GO and pyrite. The stable and uniform GO coating prevents the permeation of O₂ and H₂O and promotes the transfer of photogenerated electrons. Moreover, it changes the conduction band (CB) and valence band (VB) levels of GO-pyrite. All of these are vital for preventing the corrosion of pyrite and promoting its photocatalytic ability. More importantly, the effect of CB and VB levels on the oxidized species was discussed. The inhibition of photocorrosion is achieved by the reaction of GO with the photoinduced h⁺, ^•OH, and ^•O₂ ^-. The study provides insights for source treatment of AMD under light and the reuse of massive abandoned pyrite.

A review of graphene-based nanomaterials for removal of antibiotics from aqueous environments

Antibiotics as emerging pharmaceutical pollutants have seriously not only threatened human life and animal health security, but also caused environmental pollution. It has drawn enormous attention and research interests in the study of antibiotics removal from aqueous environments. Graphene, an interesting one-atom-thick, 2D single-layer carbon sheet with sp² hybridized carbon atoms, has become an important agent for removal of antibiotic, owing to its unique physiochemical properties. Recently, a variety of graphene-based nanomaterials (GNMs) are reported to efficiently remove antibiotics from aqueous solutions by different technologies. In this review, we summarize different structure and properties of GNMs for the removal of antibiotics by adsorption. Meanwhile, advanced oxidation processes (AOPs), such as photocatalysis, Fenton process, ozonation, sulfate radical and combined AOPs by the aid of GNMs are summarized. Finally, the opportunities and challenges on the future scope of GNMs for removal of antibiotics from aqueous environments are proposed.

Graphene and graphene-based nanocomposites used for antibiotics removal in water treatment: A review

Due to their extensive application in human and veterinary medicine, antibiotics have been found worldwide and studied as new pollutants in the aquatic environment. In order to remove such pollutants, adsorption and photocatalysis have attracted tremendous attention because of their great potential in antibiotics removal from aqueous solutions. Graphene, as a novel two-dimensional nanomaterial, possesses unique structure and physicochemical properties, which can be used to efficiently adsorb and photodegrade antibiotics. This review provides an overview of the adsorptive and catalytic properties of graphene, and recent advances in adsorption and photodegradation of antibiotics by graphene and its derivatives. The factors that affect the adsorption and photodegradation of antibiotics are reviewed and discussed. Furthermore, the underlying mechanisms of adsorption and photodegradation are summarized and analyzed. Meanwhile, statistical analysis is conducted based on the number of papers and the maximum adsorption and photodegradation ability on various antibiotics removal. Finally, some unsolved problems together with major challenges that exist in the fabrication and application of graphene-based nanocomposites and the development for antibiotics removal is also proposed. This work provides theoretical guidance for subsequent research in the field of adsorption and photocatalytic removal of antibiotics from aqueous solution, especially on influence factors and mechanisms aspects.

In situ decoration of plasmonic Au nanoparticles on graphene quantum dots-graphitic carbon nitride hybrid and evaluation of its visible light photocatalytic performance

This work spotlights the development of a plasmonic photocatalyst showing surface plasmon induced enhanced visible light photocatalytic (PC) performance. Plasmonic Au nanoparticles (NPs) are decorated over the hybrid nanosystem of graphitic carbon nitride (GCN) and graphene quantum dots (GQD) by citrate reduction method. Surface plasmon resonance (SPR) induced enhancement of Raman G and 2D band intensity is encountered on excitation of the Plasmonic hybrid at 514.5 nm, which is near to the 532 nm absorption band of Au NPs. Time-resolved photoluminescence and XPS studies show charge transfer interaction between GQD-GCN and Au NPs. Plasmonic hybrid exhibits an enhanced PC activity over the other catalysts in the photodegradation of methylene blue (MB) under visible light illumination. Plasmonic photocatalyst displays more than 6 fold enhancement in the photodecomposition rate of MB over GQD and nearly 2 fold improvement over GCN and GQD-GCN. GQD-GCN absorbs mostly in the near visible region and can be photoexcited by visible light of wavelength ([Formula: see text]) < 460 nm. Plasmon activation in Au NPs decorated GQD-GCN could exploit the entire UV-visible light for photocatalysis. Furthermore, plasmonic Au act as antennas for accumulation and enhancement of localized electromagnetic field at the interface with GQD-GCN, and thereby promotes photogeneration of large numbers of carriers on GQD-GCN. The carriers are separated by charge transfer migration from hybrid to Au NPs. Finally, the carriers on the plasmonic Au nanostructures initiate MB degradation under visible light. Our results have shown that plasmon decoration is a suitable strategy to design a carbon based hybrid photocatalyst for solar energy conversion.