Ultrasonic-assisted fabrication of montmorillonite-lignin hybrid hydrogel: Highly efficient swelling behaviors and super-sorbent for dye removal from wastewater

Lignin-Based Functional Materials in Agricultural Application: A Review

The demand for biodegradable, sustainable, and eco-friendly alternatives is growing in crop production and protection, which forces an urgent need for society to shift toward more sustainable agricultural development. In recent years, the development and research of lignin-based functional materials have gained increasing attention and impetus, and their use has become more widespread in sustainable agriculture. This review covers the latest research on the potential applications of lignin-based functional materials in plant protectants, sensors for pollutant detection, toxic element removal in soil and water, enzyme immobilization, plant growth regulators/biostimulants, hydrogels, and mulching films. Finally, future challenges and perspectives of lignin-based functional materials are discussed to provide a new strategy for the promotion of sustainable agriculture.

Lignin: A valuable and promising bio-based absorbent for dye removal applications

The importance of environmental issues and the existence of humans have led to the recognition of environmental concerns as the main risk to modern life. Notably, one major concern for protecting and managing the environment and human health is the presence of dyes in wastewater. Therefore, before discharging wastewater into mainstream water, it is crucial to remove dyes. Among all lignocellulosic materials, lignin is a highly fragrant biopolymer. Its abundant availability, complex structure, and numerous functional moieties, including hydroxyl, carboxyl, and phenolic, are used in different chemicals and applications. Based on this, lignin is a very useful green material for adsorption, specifically in removing both heavy metals and organic pollutants from wastewater. This article describes the use of lignin-based adsorbents as a recent breakthrough in the removal of dye from aqueous solutions. On the other hand, the review intends to encourage readers to study both established and novel avenues in lignin-based dye removal materials.

Phosphorylating Tannin in Urea System: A Simple Approach for Enhanced Methylene Blue Removal from Aqueous Media

Tannin, after lignin, is one of the most abundant sources of natural aromatic biomolecules. It has been used and chemically modified during the past few decades to create novel biobased materials. This work intended to functionalize for the first time quebracho Tannin (T) through a simple phosphorylation process in a urea system. The phosphorylation of tannin was studied by Fourier transform infrared spectroscopy (FTIR), NMR, inductively coupled plasma optical emission spectroscopy (ICP-OES), and X-ray fluorescence spectrometry (XRF), while further characterization was performed by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX) and thermogravimetric analysis (TGA) to investigate the morphology, composition, structure, and thermal degradation of the phosphorylated material. Results indicated the occurrence of phosphorylation, suggesting the insertion of phosphate-containing groups into the tannin structure, revealing a high content of phosphate for modified tannin (PT). This elevated phosphorus content serves as evidence for the successful incorporation of phosphate groups through the functionalization process. The corresponding PT and T were employed as adsorbents for methylene blue (MB) removal from aqueous solutions. The results revealed that the Langmuir isotherm model effectively represents the adsorption isotherms. Additionally, the pseudo-second-order model indicates that chemisorption predominantly controls the adsorption mechanism. This finding also supports the fact that the introduced phosphate groups via the phosphorylation process significantly contributed to the improved adsorption capacity. Under neutral pH conditions and at room temperature, the material achieved an impressive adsorption capacity of 339.26 mg·g-1 in about 2 h.

Synthesis of xylan and lignin based hydrogels and their use as growth media for rice (Oryza sativa)

Different hydrogels were synthesised using lignin and xylan (extracted from rice straw) as the raw material, PVA as matrix template, citric acid, and succinic acid as crosslinkers and were structurally characterised by FT-IR and SEM analysis. Citric acid cross-linked hydrogels caused loose bonding between polymers and resulted in formation of large pores whereas succinic acid cross-linked hydrogels were observed to have less porosity and tight bonding network. The swelling ratio and reswelling capacity of hydrogels revealed that lignin hydrogels outperformed all other hydrogels. All the synthesised hydrogels were tested for their use as soil culture media ingredient for the germination of rice seedlings. All the hydrogels performed well in stress conditions as compared to normal conditions. Xylan/lignin hydrogel and lignin hydrogels performed best under stress conditions. These hydrogels could be used effectively as an ingredient of soil culture media owing to their tendency to absorb and retain water properly.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Application of Red Onion Peel Extract for Green Synthesis of Silver Nanoparticles in Hydrogels Exhibiting Antimicrobial Properties

UV-initiated green synthesis of metal nanoparticles by using plant extracts as photoreducing agents is of particular interest since it is an environmentally friendly, easy-to-maintain, and cost-effective method. Plant molecules that act as reducing agents are assembled in a highly controlled way which makes them suitable for metal nanoparticle synthesis. Depending on the plant species, their application for green synthesis of metal nanoparticles for diverse applications may contribute to the mediation/reduction in organic waste amounts, thus enabling the implementation of the circular economy concept. In this work, UV-initiated green synthesis of Ag nanoparticles in hydrogels and hydrogel's thin films containing gelatin (matrix), red onion peel extract of different concentrations, water, and a small amount of 1 M AgNO₃ have been investigated and characterized using UV-Vis spectroscopy, SEM and EDS analysis, XRD technique, performing swelling experiments and antimicrobial tests using bacteria (Staphylococcus aureus, Acinetobacter baumannii, Pseudomonas aeruginosa), yeasts (Candida parapsilosis, Candida albicans) and microscopic fungi (Aspergillus flavus, Aspergillus fumigatus). It was found that the antimicrobial effectiveness of the silver-enriched red onion peel extract-gelatin films was higher at lower AgNO₃ concentrations as compared to those usually used in the commercially available antimicrobial products. The enhancement of the antimicrobial effectiveness was analyzed and discussed, assuming the synergy between photoreducing agent (red onion peel extract) and silver nitrate (AgNO₃) in the initial gel solutions leading to the intensification of Ag nanoparticles production.

A smart gating nanocellulose membrane showing selective separation and self-cleaning performance

A smart gating membrane based on thermal-sensitive poly (N-isopropyl acrylamide) (PNIPAM)-grafted nanocellulose and carbon nanotube (CNT) was prepared. The presence of PNIPAM shell on cellulose nanofibrils (CNFs) endow the composite membrane with thermal responsiveness. By external stimulation, an increase temperature from 10 °C to 70 °C allows the average pore size of the membrane to be controlled from 28 nm to 110 nm, as well as the water permeance from 440 L·m^-2·h^-1·bar^-1 to 1088 L·m^-2·h^-1·bar^-1. The gating ratio of the membrane can reach 2.47. The photothermal effect of CNT rapidly warms up the membrane to the lowest critical solution temperature in the water, avoiding the constraint that the whole water phase cannot be heated throughout the practical use process. The membrane can precisely control the nanoparticles to concentrate at 25.3 nm, 47.7 nm or 102 nm by adjust the temperature. In addition, the water permeance can be restored to 370 L·m^-2·h^-1·bar^-1 by washing the membrane under light. The smart gating membrane has a wide application in substance multi-stage separation and selective separation, and it can realize self-cleaning.

Novel Electrospun Composite Membranes Based on Polyhydroxybutyrate and Poly(vinyl formate) Loaded with Protonated Montmorillonite for Organic Dye Removal: Kinetic and Isotherm Studies

The use of biodegradable polyesters derived from green sources and their combination with natural abundantly layered aluminosilicate clay, e.g., natural montmorillonite, meets the requirements for the development of new sustainable, disposable, and biodegradable organic dye sorbent materials. In this regard, novel electrospun composite fibers, based on poly β-hydroxybutyrate (PHB) and in situ synthesized poly(vinyl formate) (PVF), loaded with protonated montmorillonite (MMT-H) were prepared via electrospinning in the presence of formic acid, a volatile solvent for polymers and a protonating agent for the pristine MMT-Na. The morphology and structure of electrospun composite fibers were investigated through SEM, TEM, AFM, FT-IR, and XRD analyses. The contact angle (CA) measurements showed increased hydrophilicity of the composite fibers incorporated with MMT-H. The electrospun fibrous mats were evaluated as membranes for removing cationic (methylene blue) and anionic (Congo red) dyes. PHB/MMT 20% and PVF/MMT 30% showed significant performance in dye removal compared with the other matrices. PHB/MMT 20% was the best electrospun mat for adsorbing Congo red. The PVF/MMT 30% fibrous membrane exhibited the optimum activity for the adsorption of methylene blue and Congo red dyes.

Alginate-Bentonite-Based Hydrogels Designed to Obtain Controlled-Release Formulations of Dodecyl Acetate

Dodecyl acetate (DDA), a volatile compound present in insect sex pheromones, was incorporated into alginate-based granules to obtain controlled-release formulations (CRFs). In this research, not only was the effect of adding bentonite to the basic alginate-hydrogel formulation studied, but also that of the encapsulation efficiency on the release rate of DDA in laboratory and field experiments. DDA encapsulation efficiency increased as the alginate/bentonite ratio increased. From the preliminary volatilization experiments, a linear relationship was found between the DDA release percentage and the amount of bentonite present in the alginate CRFs. Laboratory kinetic volatilization experiments showed that the selected alginate-bentonite formulation (DDAB₇₅A₁₀) exhibited a prolonged DDA release profile. The value of the diffusional exponent obtained from the Ritger and Peppas model (n = 0.818) indicated that the release process follows a non-Fickian or anomalous transport mechanism. Field volatilization experiments showed a steady release of DDA over time from the alginate-based hydrogels tested. This result, together with those obtained from the laboratory release experiments, allowed the obtainment of a set of parameters to improve the preparation of alginate-based CRFs for the use of volatile biological molecules, such as DDA, in agricultural biological control programs.

Designing Lignin-Based Biomaterials as Carriers of Bioactive Molecules

There is a need to develop circular and sustainable economies by utilizing sustainable, green, and renewable resources in high-tech industrial fields especially in the pharmaceutical industry. In the last decade, many derivatives of food and agricultural waste have gained considerable attention due to their abundance, renewability, biocompatibility, environmental amiability, and remarkable biological features. Particularly, lignin, which has been used as a low-grade burning fuel in the past, recently attracted a lot of attention for biomedical applications because of its antioxidant, anti-UV, and antimicrobial properties. Moreover, lignin has abundant phenolic, aliphatic hydroxyl groups, and other chemically reactive sites, making it a desirable biomaterial for drug delivery applications. In this review, we provide an overview of designing different forms of lignin-based biomaterials, including hydrogels, cryogels, electrospun scaffolds, and three-dimensional (3D) printed structures and how they have been used for bioactive compound delivery. We highlight various design criteria and parameters that influence the properties of each type of lignin-based biomaterial and corelate them to various drug delivery applications. In addition, we provide a critical analysis, including the advantages and challenges encountered by each biomaterial fabrication strategy. Finally, we highlight the prospects and future directions associated with the application of lignin-based biomaterials in the pharmaceutical field. We expect that this review will cover the most recent and important developments in this field and serve as a steppingstone for the next generation of pharmaceutical research.

One-step synthesis of highly fluorescent carbon dots as fluorescence sensors for the parallel detection of cadmium and mercury ions

Cadmium (Cd2+) and mercury ions (Hg2+) are essential for the quality control of food samples because of their serious toxicity to human health, but the effective and simple strategy for their parallel detection remains challenging. In this paper, a rapid and simple parallel detection method for Cd2+ and Hg2+ was developed using carbon dots (CDs) as fluorescent sensors. A one-step hydrothermal method with a single precursor l-arginine as both the carbon and nitrogen sources was employed to prepare nitrogen-doped CDs (N-CDs). N-CDs exhibited a uniform particle size and excitation-independent fluorescence emission. The maximum emission wavelength of N-CDs was observed at 354 nm with the excitation wavelength at 295 nm. The quantum yield of N-CDs reached as high as 71.6% in water. By using sodium diphosphate and phytic acid as masking agents, the fluorescent sensor can be quenched by Cd2+ and Hg2+ in the linear range of 0–26.8 μM and 0–49.9 μM within 5 min. Other common ions in farm products showed no significant effect on the fluorescence intensity of the sensing system. The results demonstrated that the sensing system had good selectivity and sensitivity for Cd2+ and Hg2+. The detection limits for Cd2+ and Hg2+ were 0.20 and 0.188 μM, respectively. In addition, the fluorescent sensor had been successfully applied for the detection of Cd2+ and Hg2+ in fruits and vegetables, and the recoveries were 86.44–109.40% and 86.62–115.32%, respectively. The proposed fluorescent sensor provides a rapid, simple, and sensitive detection method for Cd2+ and Hg2+ in food samples and thus a novel quantitative detection method for heavy metal ions in foods.

Conductive Hydrogels Based on Industrial Lignin: Opportunities and Challenges

The development of green materials, especially the preparation of high-performance conductive hydrogels from biodegradable biomass materials, is of great importance and has received worldwide attention. As an aromatic polymer found in many natural biomass resources, lignin has the advantage of being renewable, biodegradable, non-toxic, widely available, and inexpensive. The unique physicochemical properties of lignin, such as the presence of hydroxyl, carboxyl, and sulfonate groups, make it promising for use in composite conductive hydrogels. In this review, the source, structure, and reaction characteristics of industrial lignin are provided. Description of the preparation method (physical and chemical strategies) of lignin-based conductive hydrogel is elaborated along with their several important properties, such as electrical conductivity, mechanical properties, and porous structure. Furthermore, we provide insights into the latest research advances in industrial lignin conductive hydrogels, including biosensors, strain sensors, flexible energy storage devices, and other emerging applications. Finally, the prospects and challenges for the development of lignin-conductive hydrogels are presented.

Development of Cationic Cellulose-Modified Bentonite-Alginate Nanocomposite Gels for Sustained Release of Alachlor

The nanocomposite gel prepared from nanoclay and natural polysaccharides showed a good sustained-release property. Herein, a cationic cellulose-modified bentonite-alginate nanocomposite gel was prepared and used to enhance the sustained release of alachlor. The underlying effect and mechanism of the structure of modified bentonite-alginate nanocomposite gels on the release behavior of alachlor were explored by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric (TG) analysis. The results showed that the release of alachlor from the nanocomposite gels was dominated by Fickian diffusion and closely related to the adsorption capacity and permeability of the matrix. The cationic cellulose intercalated into the interlayer space of bentonite through an ion exchange reaction, which significantly enhanced the hydrophobicity of bentonite and its interaction with alachlor. The stacking aggregation of bentonite nanoplatelets and permeability of the gel network were decreased through the electrostatic interaction between cationic cellulose and alginate molecular chains, thus remarkably enhancing the sustained-release property of the nanocomposite gel. The release kinetics revealed that the release rate of alachlor from the nanocomposite gel first decreased and then increased as the content of bentonite and modified bentonite gradually increased. Also, the best sustained-release property of the nanocomposite gel was obtained at bentonite and modified bentonite additions of about 10%, under which the release time of 50% alachlor (T ₅₀) from bentonite-alginate and modified bentonite-alginate nanocomposite gels was 4.4 and 5.6 times longer than the release time from pure alginate gels, respectively.

Intelligent hydrogel with both redox and thermo-response based on cellulose nanofiber for controlled drug delivery

The purpose of this study is to develop a hydrogel with temperature and redox response to control drug delivery. However, the strength of temperature sensitive N-isopropylacrylamide (NIPAM) hydrogel is weak. Therefore, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidized cellulose nanofiber (CNF) is introduced to improve this problem. The compressive strength of hydrogels increased by 360% after CNF addition. Meanwhile, N,N'-bis(acryloyl)cystamine (BACy) is introduced into the hydrogels as a cross-linker, imparting redox responsive properties to the hydrogels. Tumor therapeutic drugs are used as model drugs for in vitro release studies. The drug release rate of hydrogel is regulated by temperature and reducing environment. The maximum cumulative release rate of doxorubicin (DOX) is 39.56%, and the Berberine (BBR) is 99.50% after 60 h. The swelling and transparency of hydrogels showed dramatic changes in the range of 30-40 °C. Cytotoxicity experiments demonstrated that the hydrogel had almost no cytotoxicity.

Next generation applications of lignin derived commodity products, their life cycle, techno-economics and societal analysis

The pulp and biorefining industries produce their waste as lignin, which is one of the most abundant renewable resources. So far, lignin has been remained severely underutilized and generally burnt in a boiler as a low-value fuel. To demonstrate lignin's potential as a value-added product, we will review market opportunities for lignin related applications by utilizing the thermo-chemical/biological depolymerization strategies (with or without catalysts) and their comparative evaluation. The application of lignin and its derived aromatics in various sectors such as cement industry, bitumen modifier, energy materials, agriculture, nanocomposite, biomedical, H2 source, biosensor and bioimaging have been summarized. This comprehensive review article also highlights the technical, economic, environmental, and socio-economic variable that affect the market value of lignin-derived by-products. The review shows the importance of lignin, and its derived products are a platform for future bioeconomy and sustainability.

Cu-Fe embedded cross-linked 3D hydrogel for enhanced reductive removal of Cr(VI): Characterization, performance, and mechanisms

Porous hydrogel, as a high-efficiency adsorbent for heavy metals, suffers the drawbacks of the use of expensive and toxic reagents during the process of preparation, further limiting its application ranges. Besides, the heavy metals couldn't be transformed into nontoxic species, which leads to the environmental pollution risk. Herein, a three-dimensionally (3D) structured Cu-Fe embedded cross-linked cellulose hydrogel (nFeCu-CH) was innovatively fabricated by a novel self-assembly and in-situ reduction method, which exhibited exceptionally enhanced adsorption-reduction property towards Cr(VI) wastewater. The results of degradation experiment exhibited that the removal reaction followed Langmuir-Hinshelwood first order kinetic model and the degradation rate constant decreased with solution pH and initial Cr(VI) concentration, while increased with nFeCu-CH dosage and temperature. Regeneration studies demonstrated that more than 88% of Cr(VI) was removed by nFeCu-CH even after five times of cycling. nFeCu-CH exhibited excellent reductive activity, which had a close connection with the superiority of 3D crosslinked architectures and bimetallic synergistic effect. And 97.1% of Cr(VI) could be removed when nFeCu-CH dosage was 9.5 g/L, pH was 5, initial concentration of Cr(VI) was 20 mg/L and temperature was 303 K. Combined with cellulose hydrogel not only could provide additional active sites, but also could restrain the crystallite growth and agglomeration of nano-metallic particles, leading to the promotion of Cr(VI) removal. In addition, coating with Cu facilitated the generation and transformation of electrons according to the continuous redox cycles of Fe(III)/Fe(II) and Cu(II)/Cu(I), leading to the further improvement of the reductivity of nFeCu-CH. Multiple interaction mechanisms including adsorption, reduction and co-precipitation between nFeCu-CH and Cr(VI) were realized. The current work suggested that nFeCu-CH with highly reactive sites, excellent stability and recyclability was considered as an potential material for remediation of Cr(VI) contaminated wastewater.

Efficient heavy metal removal from water by alginate-based porous nanocomposite hydrogels: The enhanced removal mechanism and influencing factor insight

Novel porous alginate-based nanocomposite hydrogels were prepared by incorporating polyaniline-polypyrrole modified graphene oxide (GO@PAN-PPy) as reinforcing fillers into the alginate matrix (GO@PAN-PPy/SA) for Cr(VI) and Cu(II) removal from water. Different in-situ co-polymerization functionalized GO with Py-to-An mass ratios of monomers (from nil to 1:1) and contents of GO@PAN-PPy (from nil to 2.0%(w/v)) were embedded into the alginate backbone to improve the sorption performance. Key factors, such as pH, coexisting metal ions, and swelling states were investigated in batch adsorption modes. The synergistic effect combined from polymer backbone and fillers could lower the impact of the pH-dependent adsorption reaction. With an adsorption ability superior to that of plain SA and GO/SA, the optimized GO@PAN-PPy-2(1)/SA exhibited good experimental maximum adsorption capacities for Cr(VI) (~133.7 mg/g) and Cu(II) (~87.2 mg/g) at pH 3.0, which were better than those of many other similar sorbents. The sorbents possessed excellent adaptability for 0.2 M salt for Cr(VI) removal but poor for Cu(II) removal. Pre-swelling treatment and co-adsorption could enhance the adsorption performance. The excellent reusability of hydrogel was demonstrated after five cycles in single/binary system. Overall, this work reveals that the resultant hydrogel holds potential as candidate sorbent to remove anionic-cationic heavy metal ions from water.

Recent advances in lignin-based porous materials for pollutants removal from wastewater

Water pollution is one of the most serious threats facing mankind today and has obtained widespread attention. Significant advances have been made in the past decades to apply porous materials in wastewater treatment, due to their large specific surface areas (S_BET) for interaction with the aimed ions or molecules. However, the majority of porous materials are prepared from fossil-based resources and still possess some drawbacks, such as high cost and non-degradability, which inevitably cause secondary pollution to the environment from their production to disposal. Lignin is the most abundant and the only scalable renewable aromatic resource on earth. Due to its unique physicochemical properties including high carbon content, plentiful functional groups and environmental friendliness, the lignin-based porous materials (LPMs) have shown promising prospects in efficient removal of soluble pollutants from wastewater. In this review, we firstly described the structural and chemical basis of LPMs, following presented the recent progress in the decontamination of heavy metal ions, organic dyes, antibiotics, anions and radionuclides from aqueous systems. Additionally, the outlook was provided to promote more practical implementation of LPMs in the near future.

Lignin-derived (nano)materials for environmental pollution remediation: Current challenges and future perspectives

The supply of affordable drinking and sufficiently clean water for human consumption is one of the world's foremost environmental problems and a large number of scientific research works are addressing this issue Various hazardous/toxic environmental contaminants in water bodies, both inorganic and organic (specifically heavy metals and dyes), have become a serious global problem. Nowadays, extensive efforts have been made to search for novel, cost effective and practical biosorbents derived from biomass resources with special attention to value added, biomass-based renewable materials. Lignin and (nano)material adorned lignin derived entities can proficiently and cost effectively remove organic/inorganic contaminants from aqueous media. As low cost of preparation is crucial for their wide applications in water/wastewater treatment (particularly industrial water), future investigations must be devoted to refining and processing the economic viability of low cost, green lignin-derived (nano)materials. Production of functionalized lignin, lignin supported metal/metal oxide nanocomposites or hydrogels is one of the effective approaches in (nano)technology. This review outlines recent research progresses, trends/challenges and future prospects about lignin-derived (nano)materials and their sustainable applications in wastewater treatment/purification, specifically focusing on adsorption and/or catalytic reduction/(photo)degradation of a variety of pollutants.

Ultrasound assisted preparation of calcium alginate beads to improve absorption of Pb+2 from water

Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation. Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.

Willow Lignin Recovered from Hot-Water Extraction for the Production of Hydrogels and Thermoplastic Blends

A blend of commercial willow cultivars (Salix spp.) was subjected to hydrothermal pretreatment: hot-water extraction in a pilot plant 65-ft³ digester. Lignin recovered from the autohydrolyzate (willow lignin, WL) was used to produce hydrogels and thermoplastic blends. Lignin-kaolin-acrylamide (WL 10.7 % w/w) and lignin-poly(ethylene)glycol diglycidyl ether (WL 66.7 % w/w) hydrogels exhibited favorable adsorption and absorption properties, respectively. Dye adsorption kinetics, swelling capacities, fragrance emanation, and compression moduli were measured for the hydrogels, along with SEM characterization. Additionally, WL was esterified by acetylation (C₂ , WAc) and acylation with lauroyl chloride (C₁₂ , WFAE and WFAE_H ). The crude and esterified lignin samples were blended (1-12 % w/w) with polylactic acid (PLA) via lab-scale melt extrusion to produce thermoplastic blends. The physicochemical properties of the blends were evaluated. They exhibited an increase in degradation temperature and UV absorbance with potential to hinder photodegradation of PLA and may be leveraged in packaging applications.

A novel cellulose hydrogel coating with nanoscale Fe0 for Cr(VI) adsorption and reduction

A novel cellulose hydrogel coating nanoscale Fe⁰ (CH@nFe⁰) was synthesized and utilized to improve the dispersibility and oxidation resistance of nFe⁰. The composition and structure of CH@nFe⁰ were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) before and after its reaction with Cr(VI). The performance of CH@nFe⁰ in the removal of Cr(VI) was evaluated through a comparative experiment between nFe⁰ and CH. The influence of the initial concentration of Cr(VI), temperature, dosage, and the initial pH of the solution were also evaluated in this reaction system. The results showed that CH@nFe⁰ allowed a higher Cr(VI) removal rate compared to nFe⁰ and CH. This might have derived from an enhanced reduction and adsorption of Cr(VI) by CH. Meanwhile, the network structure of the cellulose hydrogel served as a mass-transfer channel between Cr(VI) and nFe⁰. In addition, the increase of the initial solution pH minimized the removal of Cr(VI). This mechanism revealed that CH coating resulted in an enhancement of the adsorption capability and reducibility of CH@nFe⁰ with respect to Cr(VI). The CH@nFe⁰ composite is characterized by an advantageous mesoporous network structure and functional groups of amide and carboxylic acid, which provide additional active sites and promote mass transfer. This new three-dimensional (3-D) cellulose hydrogel coating containing nFe⁰ can be effectively used for the removal of Cr(VI) ions from aquatic environments.

Structure Regulation of Bentonite-Alginate Nanocomposites for Controlled Release of Imidacloprid

To reveal the structure and release properties of bentonite-alginate nanocomposites, bentonite of different amounts was incorporated into alginate by the sol-gel route. The structure of the composites was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis and related to the swelling property of the matrix and the release of imidacloprid. Bentonite was subject to exfoliation into nanoplatelets and combined into the polymeric network within alginate hydrogel, exhibiting profound effects on the structure features and release properties of the composites. Bentonite was of good compatibility with alginate due to the hydrogen bonding and the electrostatic attraction between them. The polymer chains were found to intercalate into the interlayer gallery of the clay. The high specific area of the nanoplatelets of bentonite benefited the intimate contact with alginate and reduced the permeability of the composites. However, in the composites with clay content of more than 10%, the polymer was insufficient to accommodate the silicate sheets completely. The aggregation of the platelets destroyed the structure integrity of the composites, facilitating the diffusion of the pesticide. The release of imidacloprid was greatly retarded by incorporating into bentonite-alginate composites and dominated by Fickian diffusion depending on the permeability of the matrix. The time taken for 50% of the active ingredient to be released, T 50, first increased and then decreased with increasing clay content in the composites, reaching a maximum around a weight percentage of 10%, at which the T 50 value for imidacloprid release was about 2.5 times that for the release from pure alginate formulation.

Current Advances of Polymer Composites for Water Treatment and Desalination

Over the past five years, a lot of research activities in polymer composites were done in order to improve environmental sustainability and to present advantages for commercial applications of water treatment and desalination. Polymers offered tunable properties, improved processability, remarkable stability, high surface area for fast decontamination, selectivity to eliminate different pollutants, and cost-cutting of water treatment. Hence, the development of polymeric materials is one of the future directions to meet the environmental water standards and to supply the water requirements of the growing populations. This review highlighted the very recent achievements in fabrication, characterization, and applications of polymeric composites used for water treatment and desalination. The polymeric modifications, the addition of functional groups, and the assemblies of nanomaterials were also discussed in detail. In particular, great attention was paid to the recent advances in polymer/polymer composites, polymer/carbon composites, and polymer/clay composites, presenting their usage in the removal of various types of contaminants, e.g., metal ions, dyes, and other toxic pollutants. The review also summarized the main advantages and disadvantages of the different adsorbent materials. Specific attention was paid to the mechanism of adsorption, including chemisorption and physisorption mechanisms. In addition, the challenges and the future perspectives were identified to reach the optimal performance of the different adsorbents.

Graft modification of lignin-based cellulose via enzyme-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization and free-radical coupling

In this study, a green approach combining enzyme-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization and free-radical coupling was developed for the modification of jute fiber, which is a typical lignin-based cellulose. Jute fiber surface was covered by rich amount of lignin, which offered great opportunities for further functional modification. The controlled polymerization of vinyl monomers, acrylamide (AM) or butyl acrylate (BA), was carried out by horseradish peroxidase (HRP)-initiated RAFT to form well-defined polymers with well-controlled molecular weights and structures. Enzymatic grafting by HRP occurred between the free radicals of well-defined polymers and free radicals of lignin on jute. Gel permeation chromatography (GPC) analysis indicated the alkyl chain length of polymers prepared via HRP-initiated RAFT polymerization was well-controlled. Other results of flourier transformed infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed that well-controlled alkyl chains prepared via enzymatic catalysis were grafted on the exposed lignin of jute. The study explores a new and eco-friendly modification method for lignin-based materials with the controlled graft chain structure via two different catalysis with HRP.

Lignin-Based Hydrogels: Synthesis and Applications

Polymers obtained from biomass are an interesting alternative to petro-based polymers due to their low cost of production, biocompatibility, and biodegradability. This is the case of lignin, which is the second most abundant biopolymer in plants. As a consequence, the exploitation of lignin for the production of new materials with improved properties is currently considered as one of the main challenging issues, especially for the paper industry. Regarding its chemical structure, lignin is a crosslinked polymer that contains many functional hydrophilic and active groups, such as hydroxyls, carbonyls and methoxyls, which provides a great potential to be employed in the synthesis of biodegradable hydrogels, materials that are recognized for their interesting applicability in biomedicine, soil and water treatment, and agriculture, among others. This work describes the main methods for the preparation of lignin-based hydrogels reported in the last years, based on the chemical and/or physical interaction with polymers widely used in hydrogels formulations. Furthermore, herein are also reviewed the current applications of lignin hydrogels as stimuli-responsive materials, flexible supercapacitors, and wearable electronics for biomedical and water remediation applications.

Antimicrobial Activity of Lignin-Derived Polyurethane Coatings Prepared from Unmodified and Demethylated Lignins

Due to global ecological and economic challenges that have been correlated to the transition from fossil-based to renewable resources, fundamental studies are being performed worldwide to replace fossil fuel raw materials in plastic production. One aspect of current research is the development of lignin-derived polyols to substitute expensive fossil-based polyol components for polyurethane and polyester production. This article describes the synthesis of bioactive lignin-based polyurethane coatings using unmodified and demethylated Kraft lignins. Demethylation was performed to enhance the reaction selectivity toward polyurethane formation. The antimicrobial activity was tested according to a slightly modified standard test (JIS Z 2801:2010). Besides effects caused by the lignins themselves, triphenylmethane derivatives (brilliant green and crystal violet) were used as additional antimicrobial substances. Results showed increased antimicrobial capacity against Staphylococcus aureus. Furthermore, the coating color could be varied from dark brown to green and blue, respectively.

Synthesis and Characterization of a Lignin-Styrene-Butyl Acrylate Based Composite

In recent years, the pursuit of new polymer materials based on renewable raw materials has been intensified with the aim of reusing waste materials in sustainable processes. The synthesis of a lignin, styrene, and butyl acrylate based composite was carried out by a mass polymerization process. A series of four composites were prepared by varying the amount of lignin in 5, 10, 15, and 20 wt.% keeping the content of butyl acrylate constant (14 wt.%). FTIR and SEM revealed that the -OH functional groups of lignin reacted with styrene, which was observed by the incorporation of lignin in the copolymer. Additionally, DSC analysis showed that the increment in lignin loading in the composite had a positive influence on thermal stability. Likewise, Shore D hardness assays exhibited an increase from 25 to 69 when 5 and 20 wt.% lignin was used respectively. In this same sense, the contact angle (water) measurement showed that the LEBA15 and LEBA20 composites presented hydrophobic properties (whit contact angle above 90°) despite having the highest amount of lignin, demonstrating that the interaction of the polymer chains with the -OH groups of lignin was the main mechanism in the composites interaction.

Lignin-based hydrogels: A review of preparation, properties, and application

Lignin as the second most abundant and the only polyaromatics-contained bio-polymer in plant has been most studied for various applications. In the past decade, the utilization of lignin for value-added materials has been extensively sought after since lignin valorization represents one of the main challenging issues of the paper industry and lignocellulosic biorefinery. Among these researches, making lignin into hydrogels has great potential for upgrading lignin into functional materials. In this review, lignin hydrogel is wrapped up with preparation strategies, properties and applications. The major cross-linking strategies to synthesize lignin-based hydrogels were reviewed first, including monomers copolymerization, crosslinking of monomers with reactive polymer precursors and polymer-polymer crosslinking. Two most important properties of mechanical and porous structures of lignin hydrogel were then discussed. More importantly, we extensively reviewed current applications of lignin hydrogel, including absorption, controlled release, smart materials for stimuli sensitive, biosensors and electrodes. These applications have paved avenues for lignin valorization. Overall, this paper covers recent advancements regarding lignin-based hydrogel and represents a timely review of this promising material.

Super-swelling lignin-based biopolymer hydrogels for soil water retention from paper industry waste

Sources of pulping red liquor, which is produced by acidic sulfite cooking in paper industry, consisted of lignosulphonate and polysaccharide, commonly considered as waste or byproducts and used in low value, such as surfactant and adhesive are wide and its price is low. Here a novel method for high value-added utilization of the pulp and paper industry waste for fabricating super-swelling biopolymer hydrogels is introduced. In contrast to other costly utilizations, which are needed to separate red liquor or purify hemicellulose and lignin before using, it is first time to directly utilize red liquor to prepare hydrogels without pretreatment. FT-IR, SEM, TGA and XRD are used to determine structure and morphology of hydrogels. It is excited the hydrogels fabricated from acrylic (AA) and industry waste exhibit super-swelling and slow release behaviors in water. Compared with synthetic materials, the hydrogels are at low price to be chosen as candidates for water retention agent for agriculture.

Efficient copper removal from wastewater through montmorillonite-supported hydrogel adsorbent

A hybrid hydrogel based on acrylic acid monomer/wheat bran, supported by montmorillonite, was synthesized using in situ polymerization and utilized as an adsorbent to remove Cu (II) ions from an aqueous solution at batch condition. The structural and morphological microanalysis of adsorbents was carried out by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray powder diffraction techniques. The type of water diffusion into the adsorbents was Fickian, and the swelling process has followed Schott's second-order kinetic model. The optimum adsorption conditions were the initial Cu (II) concentration 100 mg/l, pH 7.0, and montmorillonite dosage of 3.0 wt.%. The equilibrium time for the process was determined as 2 hr. The equilibrium data showed close fitting to the linear form of Langmuir isotherm model. Moreover, the maximum adsorption capacity has been determined to be 17.64 mg/g. Hence, montmorillonite-supported hydrogel adsorbent seems to be a promising adsorbent for the copper removal from industrial wastewaters. PRACTITIONER POINTS: A hydrogel adsorbent based on acrylic acid monomer/wheat bran, supported by montmorillonite was synthesized. The adsorbent was efficiently utilized for copper removal from aqueous solutions. The maximum adsorption capacity has been determined to be 17.64 mg/g.