Micellar and interfacial properties of amphiphilic drug–non-ionic surfactants mixed systems: Surface tension, fluorescence and UV–vis studies

Unveiling the Role of Nonionic Surfactants in Enhancing Cefotaxime Drug Solubility: A UV-Visible Spectroscopic Investigation in Single and Mixed Micellar Formulations

This study reports the interfacial phenomenon of cefotaxime in combination with nonionic surfactants, Triton X-100 (TX-100) and Tween-80 (TW-80), and their mixed micellar formulations. Cefotaxime was enclosed in a micellar system to improve its solubility and effectiveness. TX-100 and TW-80 were used in an amphiphilic self-assembly process to create the micellar formulation. The effect of the addition of TX-100, a nonionic surfactant, on the ability of TW-80 to solubilize the drug was examined. The values of the critical micelle concentration (CMC) were determined via UV-Visible spectroscopy. Gibbs free energies (ΔGp and ΔGb), the partition coefficient (Kx), and the binding constant (Kb) were also computed. In a single micellar system, the partition coefficient (Kx) was found to be 33.78 × 106 and 2.78 × 106 in the presence of TX-100 and TW-80, respectively. In a mixed micellar system, the value of the partition coefficient for the CEF/TW-80 system is maximum (5.48 × 106) in the presence of 0.0019 mM of TX-100, which shows that TX-100 significantly enhances the solubilizing power of micelles. It has been demonstrated that these surfactants are effective in enhancing the solubility and bioavailability of therapeutic compounds. This study elaborates on the physicochemical characteristics and solubilization of reactive drugs in single and mixed micellar media. This investigation, conducted in the presence of surfactants, shows a large contribution to the binding process via both hydrogen bonding and hydrophobic interactions.

Comparative studies on the aggregate formation of synthesized zwitterionic gemini and monomeric surfactants in the presence of the amphiphilic antipsychotic drug chlorpromazine hydrochloride in aqueous solution: an experimental and theoretical approach

The formation of aggregates, which are widely used in the field of biochemistry and the medical industry, was studied with different compositions of alkyl betaine gemini surfactant (C14Ab) in conjugation with chlorpromazine hydrochloride (CPZ). The results were compared with those of a single-chain zwitterionic surfactant (C12DmCB) of the same type with CPZ. Dynamic light scattering (DLS), confocal laser scanning microscopy (CLSM), and transmission electron microscopy (TEM) methods were used to distinguish the aggregates for the CPZ/C14Ab system in aqueous solutions above a certain mole fraction of the drug CPZ (αCPZ = 0.2). Time-resolved fluorescence decay measurements of acridine orange revealed relative polarity near the head group regions of mixed micelle (CPZ/C14Ab and CPZ/C12DmCB) systems. The hydrophilic environment around the head group regions of the CPZ/C14Ab system was different from that in the case of the CPZ/C12DmCB system. On the other hand, several theoretical models were employed (Clint, Rubingh, Motomura, and SPB) for mixed micellar systems to elucidate the different interaction parameters. Such a systematic study of a zwitterionic gemini amphiphile and its interaction with other amphiphiles and an amphiphilic drug molecule is rare in the literature.

Development of Bio-Nanofluids Based on the Effect of Nanoparticles' Chemical Nature and Novel Solanum torvum Extract for Chemical Enhanced Oil Recovery (CEOR) Processes

This study aimed to develop novel bio-nanofluids using Solanum torvum extracts in synergy with nanoparticles of different chemical nature as a proposal sustainable for enhanced oil recovery (EOR) applications. For this, saponin-rich extracts (SRE) were obtained from Solanum torvum fruit using ultrasound-assisted and Soxhlet extraction. The results revealed that Soxhlet is more efficient for obtaining SRE from Solanum torvum and that degreasing does not generate additional yields. SRE was characterized by Fourier transformed infrared spectrophotometry, thermogravimetric analysis, hydrophilic-lipophilic balance, and critical micelle concentration analyses. Bio-nanofluids based on SiO2 (strong acid), ZrO2 (acid), Al2O3 (neutral), and MgO (basic) nanoparticles and SRE were designed to evaluate the effect of the chemical nature of the nanoparticles on the SRE performance. The results show that 100 mg L-1 MgO nanoparticles improved the interfacial tension up to 57% and the capillary number increased by two orders of magnitude using this bio-nanofluid. SRE solutions enhanced with MgO recovered about 21% more than the system in the absence of nanoparticles. The addition of MgO nanoparticles did not cause a loss of injectivity. This is the first study on the surface-active properties of Solanum torvum enhanced with nanomaterials as an environmentally friendly EOR process.

Synergistic Interaction and Binding Efficiency of Tetracaine Hydrochloride (Anesthetic Drug) with Anionic Surfactants in the Presence of NaCl Solution Using Surface Tension and UV–Visible Spectroscopic Methods

Surfactants are ubiquitous materials that are used in diverse formulations of various products. For instance, they improve the formulation of gel by improving its wetting and rheological properties. Here, we describe the effects of anionic surfactants on an anesthetic drug, tetracaine hydrochloride (TCH), in NaCl solution with tensiometry and UV–visible techniques. Various micellar, interfacial, and thermodynamic parameters were estimated. The outputs were examined by using different theoretical models to attain a profound knowledge of drug–surfactant mixtures. The presence of attractive interactions among drug and surfactant monomers (synergism) in mixed micelle was inferred. However, it was found that sodium dodecyl sulfate (SDS) showed greater interactions with the drug in comparison to sodium lauryl sarcosine (SLS). The binding of the drug with surfactants was monitored with a spectroscopic technique (UV–visible spectra). The results of this study could help optimize the compositions of these mixed aggregates and find the synergism between monomers of different used amphiphiles.

Interaction of TX-100 and Antidepressant Imipramine Hydrochloride Drug Mixture: Surface Tension, 1H NMR, and FT-IR Investigation

Interfacial interaction amongst the antidepressant drug-imipramine hydrochloride (IMP) and pharmaceutical excipient (triton X-100 (TX-100-nonionic surfactant)) mixed system of five various ratios in dissimilar media (H₂O/50 mmol·kg⁻¹ NaCl/250 mmol·kg⁻¹ urea) was investigated through the surface tension method. In addition, in the aqueous solution, the ¹H-NMR, as well as FT-IR studies of the studied pure and mixed system were also explored and deliberated thoroughly. In NaCl media, properties of pure/mixed interfacial surfaces enhanced as compared with the aqueous system, and consequently the synergism/attractive interaction among constituents (IMP and TX-100) grew, whereas in urea (U) media a reverse effect was detected. Surface excess concentration (Γ_max), composition of surfactant at mixed monolayer (X1σ), activity coefficient (f₁^σ (TX-100) and f₂^σ (IMP)), etc. were determined and discussed thoroughly. At mixed interfacial surfaces interaction, parameter (β^σ) reveals the attractive/synergism among the components. The Gibbs energy of adsorption (ΔGadso) value attained was negative throughout all employed media viewing the spontaneity of the adsorption process. The ¹H NMR spectroscopy was also employed to examine the molecular interaction of IMP and TX-100 in an aqueous system. FT-IR method as well illustrated the interaction amongst the component. The findings of the current study proposed that TX-100 surfactant could act as an efficient drug delivery vehicle for an antidepressant drug. Gels can be used as drug dosage forms due to recent improvements in the design of surfactant systems. Release mechanism of drugs from surfactant/polymer gels is dependent upon the microstructures of the gels and the state of the drugs within the system.

Investigation of Solution Behavior of Antidepressant Imipramine Hydrochloride Drug and Non-Ionic Surfactant Mixture: Experimental and Theoretical Study

In this paper, the interaction of imipramine hydrochloride (IMP, antidepressant drug) and a non-ionic surfactant Triton X-100 (TX-100) mixture in five different ratios through the tensiometric method in different solvents (aqueous/0.050 mol·kg⁻¹ aqueous NaCl/0.250 mol·kg⁻¹ aqueous urea (U)) were examined thoroughly at a temperature of 298 K. UV–Visible studies in an aqueous system of IMP + TX-100 mixtures were also investigated and discussed in detail. The pure (IMP and TX-100) along with the mixtures’ critical micelle concentration (cmc) were assessed by a tensiometric technique. The obtained deviation of the mixtures’ cmc values from their ideal values revealed the nonideal behavior of IMP + TX-100 mixtures amongst IMP and TX-100. Compared to aqueous systems, in the presence of aqueous NaCl, several changes in micelles/mixed micelles occurred, and hence a synergism/attractive interaction amongst components was found increased while in the existence of U, the synergism/attractive interaction between them decreased. The evaluated interaction parameter (β^Rb) value of mixed micelles showed the attractive or synergism between the IMP and TX-100. Various evaluated thermodynamic parameters in an aqueous system showed that the mixed micellization of the IMP + TX-100 mixture was an entropically spontaneous phenomenon, although the existence of salt in all studied systems can somewhat increase the spontaneity of the micellization process and in the aqueous U system, the spontaneity of the micellization process decreased. In an aqueous system, the interaction between IMP and TX-100 was also confirmed by UV–Visible study.

Mixed Micellization and Spectroscopic Studies of Anti-Allergic Drug and Non-Ionic Surfactant in the Presence of Ionic Liquid

In drug delivery, surfactants are used to reduce side effects and to increase drug efficiency. The present work aimed to study the interaction of diphenhydramine hydrochloride (anti-allergic drug) with TX–45 (non-ionic surfactant) in the absence and presence of ionic liquid (1-hexyl-3-methylimidazolium chloride). The physicochemical parameters were estimated by the surface tension measurement. Various theoretical models (Clint, Rubingh, Motomura, and Maeda) were applied to determine the attractive behavior between drug and surfactant mixtures at the surface and in bulk. The drug and surfactant mixtures exhibit synergistic behavior in the absence and presence of ionic liquid. Several energetic parameters were also estimated with the assistance of regular solution approximation and pseudo phase separation model that indicate micelle formation and adsorption of surfactant at the surface is thermodynamically advantageous. The morphology of pure and mixture of amphiphiles has been estimated by the Tanford and Israelachvili theories. UV-visible spectroscopy was used to quantify the attractive behavior of the drug with surfactant with the help of a binding constant (K).

Interaction of Diphenhydramine Hydrochloride with Cationic and Anionic Surfactants: Mixed Micellization and Binding Studies

The focus of the present work is to evaluate the interactions of an anti-allergic drug (diphenhydramine hydrochloride, DPH) with anionic (sodium dodecyl sulfate, SDS) and cationic (cetylpyridinium chloride, CPC) surfactants in the aqueous medium. The mixed micellization behavior and surface properties of drug-surfactant mixtures have been examined by surface tension measurements. Various theoretical approaches were applied to explore the synergistic or non-ideal behavior of the current mixed systems. Furthermore, the binding studies of drug with surfactants have been elaborated by UV–visible spectroscopy. Benesi–Hildebrand (B-H) theory was used to compute stoichiometric ratio, binding constant, and free energy change for the drug-surfactant mixtures. The outputs are deliberated taking into consideration the use of surfactants as capable drug delivery agents for DPH and hence advance bioavailability.

Drug localization and its effect on the physical stability of poloxamer 188-stabilized colloidal lipid emulsions

Colloidal lipid emulsions are a promising formulation option for poorly water-soluble drugs. Due to their complex composition, they provide different sites for the localization of drugs. Drug molecules can be situated in the lipid matrix, in the aqueous phase with its structures formed by an excess of emulsifier or at the droplet interface. The interface and the mechanism of stabilization is mainly characterized by the emulsifier. In this study, the main focus was on the influence of drug localization on the stability of emulsions sterically stabilized with poloxamer188. In addition to 5% of this non-ionic emulsifier, the emulsions contained 10% soybean oil. The localization of the drugs fenofibrate, curcumin, betamethasone valerate, cinnarizine, dibucaine and flufenamic acid within the emulsion system at a physiological pH of 7.4 as well as their influence on emulsion stability were examined. The results indicated that the stability of poloxamer 188-stabilized emulsions can be influenced in a positive or negative way by the localization of drug molecules in the interface of emulsion droplets. Applying cinnarizine as model substance at pH 5, 7.4 and 10, no pronounced change in the localization was detected as a result of alterations in the charge of the drug.

Effect of surfactant on quality and performance attributes of topical semisolids

Surfactants are the most common inactive ingredients used in topical drug products. Surfactants in topical products play many functional roles such as emulsifiers, permeation enhancers, and solubilizers. This study was aimed to evaluate the influence of incremental change in the concentration of a surfactant (tween 80) on the quality attributes and performance of semisolid topical products. Four creams were prepared using metronidazole as a model drug using the same manufacturing protocol and similar composition except for the concentration of tween 80, which was increased by 5% w/w across SF1 to SF4. The quality attributes like globule size, pH, drying rate, and in-vitro permeation profile were characterized. The critical quality attributes did not differ significantly across the products. However, there was a significant difference in the permeation profile of the products. The permeation flux (J_max) varied from SF1 to SF4 (51.25 ± 35.29 to 307.98 ± 138.89 ng/cm²/h, respectively). The reason for the difference in the performance of products despite having consistent quality attributes was investigated. One of the major reasons was found to be the difference in the time course of degree of saturation of drug during the evaporative metamorphosis. This study confirms that the time course of degree of saturation is one of the important quality attributes of the topical product that could influence bioavailability and performance of topical products.

Fluorescence Study of the Influence of the Structure and Hydrophobicity of Fluorescent Dyes and Cationic Surfactants on their Association in Aqueous Solutions

The statistical characteristics of the dependences of the fluorescence signal of analytical systems as a function of the integral parameters of the structure of fluorescent reagents and cationic surfactants on their association in aqueous solutions has been investigated. Molecular weight, surface area, and their first-order molecular connectivity index have been taken as parameters of the structure of the reagents and cationic surfactants. The influence of the hydrophobicity of the reagent and cationic surfactants, such as the octanol–water distribution constant and octanol–water partition coefficient, on the fluorescence signal of the reagent–cationic surfactant associates have also been investigated. It is shown that the associates of anionic reagents with cationic surfactant counter ions are characterised by high stability and a higher analytical signal compared with associates in which there is no electrostatic attraction between the reagent and the surfactant ion. The effect of hydrophobicity of the reagent and cationic surfactant in the absence of electrostatic attraction between the interacting particles is similar. The increase in the role of the influence of the structure of cationic reagents in their association with cationic surfactants, when the electrostatic attraction is absent and the stability of the associates is due mainly to hydrophobic interactions, is noticeable. The regularities of the influence of the colloid-chemical state on the analytical signal of associated cationic surfactants in solutions have been investigated. The study made it possible to formulate a rational basis for the search and design of analytical systems for the determination of large cations by the fluorescence method.

Self-Assembly, Interfacial, and Thermodynamic Properties of Antipsychotic Drug with Bile Salt in Water/Salt Solutions

Herein, we investigated the micelle formation of mixed systems of the antipsychotic drug, chlorpromazine hydrochloride (CPZ), and the bile salt, sodium deoxycholate (NaDC), both in the absence and presence of NaCl by tensiometry. To understand the aggregation behaviour of the mixture of these two amphiphiles, we calculated various micellar and interfacial parameters using the theories of Clint, Rubingh, Rosen and Motomura. The calculated interaction parameters indicate an attractive interaction between the two amphiphiles both in the absence and presence of salt. The results were discussed with regard to the use of bile salt as a promising drug carrier for CPZ and the improvement of its bioavailability.