Wettability of plasma modified glass surface with bioglass layer in polysaccharide solution

Hybrid green bionanocomposites based on chitosan/starch/gelatin and metallic nanoparticles for biological applications

Multicomponent composites based on natural biopolymers: chitosan, starch and gelatin in two different ratios (0.5:1:1 and 1:1:1) were in situ crosslinked by intermolecular interactions and used as matrices for zinc oxide and magnetite fillers. The bionanocomposite films have been evaluated by spectral and microscopy methods: Fourier-Transform Infrared spectrometry (FT-IR), Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) confirming the electrostatic and hydrogen bonding interactions between the components of the polymeric matrices and the inorganic fillers and the crosslinking process. AFM and SEM images showed a compact, non-porous and homogenous morphology of the hybrid films, proving a good miscibility of the blends. At lower concentrations of embedded filler, the composites were less hardened and more ductile due to the interaction with the polymeric matrix. Increased amounts of inorganic NPs led to the reduced mechanical properties of the prepared materials and increased thermal stability. The bionanocomposites revealed a similar behavior of the dielectric constant with frequency and increased values at higher temperatures. The wettability of the films' surface and the values of the water sorption capacity revealed a slight hydrophilicity of the bionanocomposites as compared with the initial matrices. The biocompatibility, evaluated by means of the surface free energy components and the interfacial tension with blood, and the hemolysis analysis demonstrated that the bionanocomposites possess a low risk of thrombosis, being promising materials for in vivo biomedical applications.

Fabrication of Eco-Friendly Wearable Strain Sensor Arrays via Facile Contact Printing for Healthcare Applications

Wearable flexible strain sensors with spatial resolution enable the acquisition and analysis of complex actions for noninvasive personalized healthcare applications. To provide secure contact with skin and to avoid environmental pollution after usage, sensors with biocompatibility and biodegradability are highly desirable. Herein, wearable flexible strain sensors composed of crosslinked gold nanoparticle (GNP) thin films as the active conductive layer and transparent biodegradable polyurethane (PU) films as the flexible substrate are developed. The patterned GNP films (micrometer- to millimeter-scale square and rectangle geometry, alphabetic characters, and wave and array patterns) are transferred onto the biodegradable PU film via a facile, clean, rapid and high-precision contact printing method, without the need of a sacrificial polymer carrier or organic solvents. The GNP-PU strain sensor with low Young's modulus (≈17.8 MPa) and high stretchability showed good stability and durability (10 000 cycles) as well as degradability (42% weight loss after 17 days at 74 °C in water). The GNP-PU strain sensor arrays with spatiotemporal strain resolution are applied as wearable eco-friendly electronics for monitoring subtle physiological signals (e.g., mapping of arterial lines and sensing pulse waveforms) and large-strain actions (e.g., finger bending).

Effect of Surfactant Formula on the Film Forming Capacity, Wettability, and Preservation Properties of Electrically Sprayed Sodium Alginate Coats

Surfactants are always added to coating formulations to ensure good adhesion of edible coatings to a product's surface and to maintain freshness. In this study, the effects of the mix surfactants Tween 20 and Span 80 with different hydrophile-lipophile balance (HLB) values on the film-forming ability, wettability, and preservation capacity of blueberry sodium alginate coating were investigated. The results indicated that Tween 20 obviously ensured favorable wettability and improved the uniformity and mechanical properties of the resulting film. While the addition of Span 80 reduced the mean particle size of the coating, enhanced the water resistance of the film, and helped to reduce blueberry weight loss. A sodium alginate coating with low viscosity and medium HLB could better inhibit the galactose, sucrose, and linoleic acid metabolism of blueberries, reduce the consumption of phenols, promote the accumulation of flavonoids, and thus display superior coating performance. In summary, sodium alginate coating with medium HLB had comprehensive advantages in film-forming ability and wettability and was conducive to the fresh-keeping role.

Effect of Various Surface Treatments on Wettability and Morphological Properties of Titanium Oxide Thin Films

The effect of three popular surface activation methods for a titanium oxide (titania) surface was thoroughly investigated to identify the most effective protocol for the enhancement of hydrophilicity. All the methods, namely H₂O₂ activation, UV irradiation and oxygen plasma treatment resulted in an enhanced hydrophilic titania surface, which was evidenced by the reduced contact angle values. To study in detail the chemical and morphological features responsible for the increased hydrophilicity, the treated surfaces were submitted to inspection with atomic force microscopy and X-ray photoelectron spectroscopy. The correlation between the treatment and titania surface hydroxylation as well as hydrophilic behavior have been discussed.

Functionalization and Surface Modifications of Bioactive Glasses (BGs): Tailoring of the Biological Response Working on the Outermost Surface Layer

Bioactive glasses (BGs) are routinely being used as potent materials for hard and soft tissue engineering applications; however, improving their biological activities through surface functionalization and modification has been underestimated so far. The surface characteristics of BGs are key factors in determining the success of any implanted BG-based material in vivo since they regulate the affinity and binding of different biological macromolecules and thereby the interactions between cells and the implant. Therefore, a number of strategies using chemical agents (e.g., glutaraldehyde, silanes) and physical methods (e.g., laser treatment) have been evaluated and applied to design properly, tailor, and improve the surface properties of BGs. All these approaches aim at enhancing the biological activities of BGs, including the induction of cell proliferation and subsequent osteogenesis, as well as the inhibition of bacterial growth and adhesion, thereby reducing infection. In this study, we present an overview of the currently used approaches of surface functionalization and modifications of BGs, along with discussing the biological outputs induced by these changes.

Wettability of DPPC Monolayers Deposited from the Titanium Dioxide–Chitosan–Hyaluronic Acid Subphases on Glass

The investigations were carried out to determine wettability of the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayers transferred from the liquid subphases containing chitosan (Ch), hyaluronic acid (HA), and/or titanium dioxide (TiO2) to a glass support by means of the Langmuir–Blodgett (LB) technique. For comparative purposes, the analysis of the plates surfaces emerged from the analogous subphases without the phospholipid film was also made. Characterization of the DPPC monolayers was based on the contact angle measurements using three test liquids (water, formamide, diiodomethane) and a simulated body fluid (SBF) solution in which the concentration of ions was close to that of human plasma. After deposition of the DPPC monolayers on the glass plates, a significant increase in the contact angles of all the probe liquids was observed compared to the plates pulled out from the given subphase without floating DPPC. The presence of phospholipid monolayer increased the hydrophobic character of the surface due to orientation of its molecules with hydrocarbon chains towards the air. In addition, the components of the subphase attached along with DPPC to the glass support modify the surface polarity. The largest changes were observed in the presence of TiO2.