Studying the colloidal behavior of chimeric liposomes by cryo-TEM, micro-differential scanning calorimetry and high-resolution ultrasound spectroscopy

Unveiling the Performance of Co-Assembled Hybrid Nanocarriers: Moving towards the Formation of a Multifunctional Lipid/Random Copolymer Nanoplatform

Despite the appealing properties of random copolymers, the use of these biomaterials in association with phospholipids is still limited, as several aspects of their performance have not been investigated. The aim of this work is the formulation of lipid/random copolymer platforms and the comprehensive study of their features by multiple advanced characterization techniques. Both biomaterials are amphiphilic, including two phospholipids (1,2-dioctadecanoyl-sn-glycero-3-phosphocholine (DSPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)) and a statistical copolymer of oligo (ethylene glycol) methyl ether methacrylate (OEGMA) and 2-(diisopropylamino) ethyl methacrylate (DIPAEMA). We examined the design parameters, including the lipid composition, the % comonomer ratio, and the lipid-to-polymer ratio that could be critical for their behavior. The structures were also probed in different conditions. To the best of the authors' knowledge, this is the first time that P(OEGMA-co-DIPAEMA)/lipid hybrid colloidal dispersions have been investigated from a membrane mechanics, biophysical, and morphological perspective. Among other parameters, the copolymer architecture and the hydrophilic to hydrophobic balance are deemed fundamental parameters for the biomaterial co-assembly, having an impact on the membrane's fluidity, morphology, and thermodynamics. Exploiting their unique characteristics, the most promising candidates were utilized for methotrexate (MTX) loading to explore their encapsulation capability and potential antitumor efficacy in vitro in various cell lines.

Advances in block copolymer-phospholipid hybrid vesicles: from physical-chemical properties to applications

Hybrid vesicles, made of lipids and amphiphilic block copolymers, have become increasingly popular thanks to their versatile properties that enable the construction of intricate membranes mimicking cellular structures. This tutorial review gives an overview over the different hybrid vesicle designs, and provides a detailed analysis of their properties, including their composition, membrane fluidity, membrane homogeneity, permeability, stability. The review puts emphasis on the application of these hybrid vesicles in bottom-up synthetic biology and aims to offer an overview of design guidelines, particularly focusing on composition, to eventually realize the intended applications of these hybrid vesicles.

Deciphering the Lipid-Random Copolymer Interactions and Encoding Their Properties to Design a Hybrid System

Lipid/copolymer colloidal systems are deemed hybrid materials with unique properties and functionalities. Their hybrid nature leads to complex interfacial phenomena, which have not been fully encoded yet, navigating their properties. Moving toward in-depth knowledge of such systems, a comprehensive investigation of them is imperative. In the present study, hybrid lipid/copolymer structures were fabricated and examined by a gamut of techniques, including dynamic light scattering, fluorescence spectroscopy, cryogenic transmission electron microscopy, microcalorimetry, and high-resolution ultrasound spectroscopy. The biomaterials that were mixed for this purpose at different ratios were 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine and four different linear, statistical (random) amphiphilic copolymers, consisting of oligo(ethylene glycol) methyl ether methacrylate as the hydrophilic comonomer and lauryl methacrylate as the hydrophobic one. The colloidal dispersions were studied for lipid/copolymer interactions regarding their physicochemical, morphological, and biophysical behavior. Their membrane properties and interactions with serum proteins were also studied. The aforementioned techniques confirmed the hybrid nature of the systems and the location of the copolymer in the structure. More importantly, the random architecture of the copolymers, the hydrophobic-to-hydrophilic balance of the nanoplatforms, and the lipid-to-polymer ratio are highlighted as the main design-influencing factors. Elucidating the lipid/copolymer interactions would contribute to the translation of hybrid nanoparticle performance and, thus, their rational design for multiple applications, including drug delivery.

Structure-Based Evaluation of Hybrid Lipid-Polymer Nanoparticles: The Role of the Polymeric Guest

The combination of phospholipids and block-copolymers yields advanced hybrid nanoparticles through the self-assembly process in an aqueous environment. The physicochemical features of the lipid/polymer components, like the lipid-polymer molar ratio, the macromolecular architecture of the block copolymer, the main transition temperature of the phospholipid, as well as the formulation and preparation protocol parameters, are some of the most crucial parameters for the formation of hybrid lipid/polymer vesicles and for the differentiation of their morphology. The morphology, along with other physicochemical nanoparticle characteristics are strictly correlated with the nanoparticle's later biological behavior after being administered, affecting interactions with cells, biodistribution, uptake, toxicity, drug release, etc. In the present study, a structural evaluation of hybrid lipid-polymer nanoparticles based on cryo-TEM studies was undertaken. Different kinds of hybrid lipid-polymer nanoparticles were designed and developed using phospholipids and block copolymers with different preparation protocols. The structures obtained ranged from spherical vesicles to rod-shaped structures, worm-like micelles, and irregular morphologies. The obtained morphologies were correlated with the formulation and preparation parameters and especially the type of lipid, the polymeric guest, and their ratio.

Development of Hybrid DSPC:DOPC:P(OEGMA950-DIPAEMA) Nanostructures: The Random Architecture of Polymeric Guest as a Key Design Parameter

Hybrid nanoparticles have gained a lot of attention due to their advantageous properties and versatility in pharmaceutical applications. In this perspective, the formation of novel systems and the exploration of their characteristics not only from a physicochemical but also from a biophysical perspective could promote the development of new nanoplatforms with well-defined features. In the current work, lipid/copolymer bilayers were formed in different lipid to copolymer ratios and examined via differential scanning calorimetry as a preformulation study to decipher the interactions between the biomaterials, followed by nanostructure preparation by the thin-film hydration method. Physicochemical and toxicological evaluations were conducted utilizing light scattering techniques, fluorescence spectroscopy, and MTS assay. 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine (DSPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) in different weight ratios were the chosen lipids, while a linear random copolymer with pH- and thermoresponsive properties comprised of oligo (ethylene glycol) methyl ether methacrylate (OEGMA) and 2-(diisopropylamino) ethyl methacrylate (DIPAEMA) in different ratios was used. According to our results, non-toxic hybrid nanosystems with stimuli-responsive properties were successfully formulated, and the main parameters influencing their overall performance were the hydrophilic/hydrophobic balance, lipid to polymer ratio, and more importantly the random copolymer topology. Hopefully, this investigation can promote a better understanding of the factors affecting the behavior of hybrid systems.

DoE development of ionic gradient liposomes: A successful approach to improve encapsulation, prolong anesthesia and decrease the toxicity of etidocaine

Etidocaine (EDC) is a long-acting local anesthetic of the aminoamide family whose use was discontinued in 2008 for alleged toxicity issues. Ionic gradient liposomes (IGL) are nanostructured carriers for which an inner/outer gradient of ions increases drug upload. This work describes IGL_EDC, a formulation optimized by Design of Experiments, composed of hydrogenated soy phosphatidylcholine:cholesterol:EDC, and characterized by DLS, NTA, TEM/Cryo-TEM, DSC and ¹H NMR. The optimized IGL showed significant encapsulation efficiency (41 %), good shelf stability (180 days) and evidence of EDC interaction with the lipid bilayer (as seen by DSC and ¹H NMR results) that confirms its membrane permeation. In vitro (release kinetics and cytotoxicity) tests showed that the encapsulation of EDC into the IGL promoted sustained release for 24 h and decreased by 50 % the intrinsic toxicity of EDC to Schwann cells. In vivo IGL_EDC decreased the toxicity of EDC to Caenorhabditis elegans by 25 % and extended its anesthetic effect by one hour, after infiltrative administration, at clinically used (0.5 %) concentration, in rats. Thus, this novel drug delivery system is a promise for the possible reintroduction of EDC in clinics, aiming at the control of operative and postoperative pain.

Fluidized or not fluidized? Biophysical characterization of biohybrid lipid/protein/polymer liposomes and their interaction with tetracaine

BACKGROUND

Nanomedicine and the pharmaceutical industry demand the investigation of new biomaterials to improve drug therapies. Combinations of lipids, proteins, and polymers represent innovative platforms for drug delivery. However, little is known about the interactions between such compounds and this knowledge is key to prepare successful drug delivery systems.

METHODS

Biophysical properties of biohybrid vesicles (BhVs) composed of phospholipids, proteins, and amphiphilic block copolymers, assembled without using organic solvents, were investigated by differential scanning calorimetry and dynamic light scattering. We studied four biohybrid systems; two of them included the effect of incorporating tetracaine. Thermal changes of phospholipids and proteins when interacting with the amphiphilic block copolymers and tetracaine were analyzed.

RESULTS

Lysozyme and the copolymers adsorb onto the lipid bilayer modifying the phase transition temperature, enthalpy change, and cooperativity. Dynamic light scattering investigations revealed relevant changes in the size and zeta potential of the BhVs. Interestingly, tetracaine, a membrane-active drug, can fluidize or rigidize BhVs.

CONCLUSIONS

We conclude that positively charged regions of lysozyme are necessary to incorporate the block copolymer chains into the lipid membrane, turning the bilayer into a more rigid system. Electrostatic properties and the hydrophilic-lipophilic balance are determinant for the stability of biohybrid membranes.

GENERAL SIGNIFICANCE

This investigation provides fundamental information associated with the performance of biohybrid drug delivery systems and can be of practical significance for designing more efficient drug nanocarriers.

Walnut peptide loaded proliposomes with hydroxyapatite as a carrier: Fabrication, environmental stability, and in vitro digestion attribute

To explore the feasibility of hydroxyapatite (HAP) as the carrier for proliposomes and improve the stability of walnut peptides (WPs), WPs-loaded proliposomes (WPs-PROLIPs) with hydroxyapatite (HAP) as the carrier were fabricated, and the physicochemical properties, environmental stability as well as in vitro simulated digestion release performance of the proliposomes were investigated. The proliposomes with HAP possessed smaller particle sizes and higher encapsulation efficiencies than those without HAP. FTIR analysis revealed that hydrogen bonds formed between HAP and phospholipids in the proliposomes. The inclusion of HAP in WPs-PROLIPs led to the improvement of the thermal degradation stability and environmental stabilities of the system. HAP also induced the conversion of free water into bound water in the proliposomes, as evaluated by LF NMR. In addition, proliposomal encapsulation did not affect the antioxidant activity of WPs-PROLIPs and the lateral order of the liposome membrane. Finally, in vitro digestion showed that the addition of HAP endowed the proliposomes with a retarded free fatty acid release effect, which was dependent on the weight ratio of phospholipids to HAP. These results offer opportunities for the use of HAP as a feasible carrier and lyoprotectant for proliposomes encapsulating biopeptides.

Glycyrrhetinic acid proliposomes mediated by mannosylated ligand: Preparation, physicochemical characterization, environmental stability and bioactivity evaluation

Glycyrrhetinic acid is a bioactive compound extracted from licorice that exhibits inhibition effect on various cancers. However, its hydrophobicity results in low bioavailability that limits application. We aim to overcome this barrier, the present research was performed to prepare glycyrrhetinic acid proliposomes mediated mannosylated ligand (mannose-diester lauric diacid-cholesterol, MDC) and to evaluate its physicochemical characterizations, environmental stability and bioactivity. In preliminary optimization studies of glycyrrhetinic acid proliposomes mediated MDC (MDC-GA-PL), four optimum operating parameters, cryoprotectant of glucose and mannitol, the mixed cryoprotectant ratio (glucose/mannitol) of 1:1, a cryoprotectant/egg phosphatidylcholine mass ratio of 10/1, and -60 ℃ pre-freezing temperature, were obtained after investigation. Under the optimum lyophilization conditions, MDC-GA-PL was freeze-dried and reconstituted proliposomes were characterized. These proliposomes showed that MDC-GA-PL were well-dispersible spherical particles with an average particle size of 120.80 nm, a polydispersity index about 0.095, a zeta potential of -33.15 mV, encapsulation efficiency of 85.9% and drug loading of 6.38%. In vitro drug release study showed that glycyrrhetinic acid release of MDC-GA-PL conforms to the Higuchi release model. In addition, these proliposomes were stable during six months at 4 ℃. Moreover, acute toxicity assay revealed no substantial safety concern for MDC-GA-PL. Finally, in vitro bioactivity of proliposomes was evaluated. Cytotoxicity effect and apoptosis efficiency of MDC-GA-PL by HepG2 cells was significantly higher than that of glycyrrhetinic acid proliposomes without MDC, demonstrating that MDC has a desirable effect on liver target. Overall, we have reason to believe that MDC-GA-PL would be a promising target delivery to improve therapeutic against hepatic diseases.

Aqueous Heat Method for the Preparation of Hybrid Lipid–Polymer Structures: From Preformulation Studies to Protein Delivery

Liposomes with adjuvant properties are utilized to carry biomolecules, such as proteins, that are often sensitive to the stressful conditions of liposomal preparation processes. The aim of the present study is to use the aqueous heat method for the preparation of polymer-grafted hybrid liposomes without any additional technique for size reduction. Towards this scope, liposomes were prepared through the combination of two different lipids with adjuvant properties, namely dimethyldioctadecylammonium (DDA) and D-(+)-trehalose 6,6′-dibehenate (TDB) and the amphiphilic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PLMA-b-PDMAEMA). For comparison purposes, PAMAM dendrimer generation 4 (PAMAM G4) was also used. Preformulation studies were carried out by differential scanning calorimetry (DSC). The physicochemical characteristics of the prepared hybrid liposomes were evaluated by light scattering and their morphology was evaluated by cryo-TEM. Subsequently, in vitro nanotoxicity studies were performed. Protein-loading studies with bovine serum albumin were carried out to evaluate their encapsulation efficiency. According to the results, PDMAEMA-b-PLMA was successfully incorporated in the lipid bilayer, providing improved physicochemical and morphological characteristics and the ability to carry higher cargos of protein, compared to pure DDA:TDB liposomes, without affecting the biocompatibility profile. In conclusion, the aqueous heat method can be applied in polymer-grafted hybrid liposomes for protein delivery without further size-reduction processes.

High-Resolution Ultrasound Spectroscopy for the Determination of Phospholipid Transitions in Liposomal Dispersions

High-resolution ultrasound spectroscopy (HR-US) is a spectroscopic technique using ultrasound waves at high frequencies to investigate the structural properties of dispersed materials. This technique is able to monitor the variation of ultrasound parameters (sound speed and attenuation) due to the interaction of ultrasound waves with samples as a function of temperature and concentration. Despite being employed for the characterization of several colloidal systems, there is a lack in the literature regarding the comparison between the potential of HR-US for the determination of phospholipid thermal transitions and that of other common techniques both for loaded or unloaded liposomes. Thermal transitions of liposomes composed of pure phospholipids (dimyristoylphosphatidylcholine, DMPC; dipalmitoylphosphatidylcholine, DPPC and distearoylphosphatidylcholine, DSPC), cholesterol and their mixtures were investigated by HR-US in comparison to the most commonly employed microcalorimetry (mDSC) and dynamic light scattering (DLS). Moreover, tramadol hydrochloride, caffeine or miconazole nitrate as model drugs were loaded in DPPC liposomes to study the effect of their incorporation on thermal properties of a phospholipid bilayer. HR-US provided the determination of phospholipid sol-gel transition temperatures from both attenuation and sound speed that are comparable to those calculated by mDSC and DLS techniques for all analysed liposomal dispersions, both loaded and unloaded. Therefore, HR-US is proposed here as an alternative technique to determine the transition temperature of phospholipid membrane in liposomes.

Prolonged anesthesia and decreased toxicity of enantiomeric-excess bupivacaine loaded in ionic gradient liposomes

Bupivacaine is the most employed local anesthetic in surgical procedures, worldwide. Its systemic toxicity has directed the synthesis of the less toxic, S(-) enantiomer. This work describes a formulation of ionic gradient liposomes (IGL) containing _S75BVC, an enantiomeric excess mixture of 75% S(-) and 25% R(+) bupivacaine. IGL prepared with 250 mM (NH₄)₂SO₄ in the inner aqueous core of phosphatidylcholine and cholesterol (3:2 mol%) vesicles plus 0.5% _S75BVC showed average sizes of 312.5 ± 4.5 nm, low polydispersity (PDI < 0.18), negative zeta potentials (-14.2 ± 0.2 mV) and were stable for 360 days. The encapsulation efficiency achieved with IGL_S75BVC (%EE = 38.6%) was higher than with IGL prepared with racemic bupivacaine (IGL_RBVC, %EE = 28.3%). TEM images revealed spherical vesicles and µDSC analysis provided evidence on the interaction of the anesthetic with the lipid bilayer. Then, in vitro - release kinetics and cytotoxicity- and in vivo - toxic effects in Zebrafish and biochemical/histopathological analysis plus analgesia in Wistar rats - tests were performed. IGL_S75BVC exhibited negligible toxicity against Schwann cells and Zebrafish larvae, and it did not affect biochemical markers or the morphology of rat tissues (heart, brain, cerebellum, sciatic nerve). The in vitro release of _S75BVC from IGL was extended from 4 to 24 h, justifying the prolonged anesthetic effect measured in rats (~9 h). The advantages of IGL_S75BVC formulation over IGL_RBVC and plain bupivacaine formulations (prolonged anesthesia, preferential sensorial blockade, and no toxicity) confirm its potential for clinical use in surgical anesthesia.

Fabrication and characterization of walnut peptides-loaded proliposomes with three lyoprotectants: Environmental stabilities and antioxidant/antibacterial activities

To protect walnut peptides from harsh external environments during their storage and digestion, proliposomes loaded with walnut peptides were fabricated using sucrose, trehalose, and mannitol as carriers and lyoprotectants. The physicochemical properties, environmental stability, antioxidant/antibacterial activities, and digestion in vitro of the proliposomes were evaluated. The freshly prepared liposomes were uniform in size, but the hydrated proliposomes showed a more uneven size distribution. The lyoprotectants helped maintain favorable liposome shape during lyophilization. Alongside the lyoprotectants, the walnut peptides further stabilized the lipid bilayer. Proliposomes encapsulation didn't impact the peptides' antioxidant activity. Furthermore, walnut peptides-loaded proliposomes exhibited antibacterial activity against Escherichia coli and Staphylococcus aureus. The proliposomes were stable during gastric-phase digestion. The lyoprotectants changed the free fatty acid release behaviors of the proliposomes. These characteristics suggest potential applications for proliposomes as effective delivery systems for biopeptides in food stuffs, thereby protecting bioactivities during storage and passage through the gastrointestinal tract.

Formation of Uni-Lamellar Vesicles in Mixtures of DPPC with PEO-b-PCL Amphiphilic Diblock Copolymers

The ability of mixtures of 1.2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and the amphiphilic diblock copolymers poly (ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) to stabilize uni-lamellar nano-vesicles is reported. Small angle neutron scattering (SANS) is used to define their size distribution and bilayer structure and resolve the copresence of aggregates and clusters in solution. The vesicles have a broad size distribution which is compatible with bilayer membranes of relatively low bending stiffness. Their mean diameter increases moderately with temperature and their number density and mass is higher in the case of the diblock copolymer with the larger hydrophobic block. Bayesian analysis is performed in order to justify the use of the particular SANS fitting model and confirm the reliability of the extracted parameters. This study shows that amphiphilic block copolymers can be effectively used to prepare mixed lipid-block copolymer vesicles with controlled lamellarity and a significant potential as nanocarriers for drug delivery.

Liquid crystalline nanoparticles for drug delivery: The role of gradient and block copolymers on the morphology, internal organisation and release profile

Amphiphilic polymers represent one of the main class of stabilizers for non-lamellar lyotropic liquid crystalline nanoparticles, being essential for their formation and stability. In the present study, poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) block copolymers and poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) (MPOx) gradient copolymers were incorporated as stabilizers in liquid crystalline nanoparticles prepared from glyceryl monooleate. The polymers were chosen according to their high biocompatibility and promising stealth properties, in order to develop safe and efficient drug delivery nanosystems. The physicochemical characteristics and fractal dimension of the resultant nanosystems were obtained from light scattering techniques, while their micropolarity and microfluidity from fluorescence spectroscopy. The effect of temperature, serum proteins and ionic strength on the physicochemical behavior was monitored. Their morphology was assessed by cryo-TEM, while their thermal behavior by microcalorimetry and high-resolution ultrasound spectroscopy. Their properties were dependent on the stabilizer chemistry and topology (block/gradient copolymer) and its concentration. Subsequently, resveratrol, as model hydrophobic drug, was loaded into the nanosystems, the entrapment efficiency was calculated and in vitro release studies were carried out, highlighting how the different stabilizer can differentiate the drug release profile. In conclusion, the proposed copolymers broaden the toolbox of polymeric stabilizers for the development of liquid crystalline nanoparticles intended for drug delivery applications.

Recent advances and prospects in nano drug delivery systems using lipopolyoxazolines

Facing the growing demand in nano drug delivery systems (nDDS), hybrid excipients based on natural molecules and well-defined synthetic polymers are intensively investigated. Lipopolyoxazolines (LipoPOx) composed of a polyoxazoline block (POx) and a lipid or lipid-like derivative are detailed in this review. The nature of lipids used, the route to synthesize LipoPOx and their advantages for the formulation of drugs are reported. The place of POx family in nanomedicine is discussed compared to PEG, considered as the gold standard of hydrophilic polymers. LipoPOx nanoformulations including liposomes, mixed micelles, lipid nanocapsules are provided alongside discussion of the nDDS for intravenous or topical administration.

Effect of lyophilization on the physicochemical and rheological properties of food grade liposomes that encapsulate rutin

The potential use of liposomes as carriers for food active ingredients can be limited by their physical and chemical instabilities in aqueous dispersions, especially for long-term storage. Lyophilization, a process commonly used in the food industry, can also be applied to stabilize and preserve liposomes and to extend their shelf-life. In this work, liposomes with potential use for designing functional foods were prepared with soy phospholipids and rutin. Homogenization and ultrasound were used for particle size reduction. Liposomal stability was evaluated by Dynamic Light Scattering, microscopy and rheological properties. Spherical and unilamellar liposomes were obtained in this work. Zeta potential (ξ = values were around -40 mV), which indicates a great suspension stability even for more than 30 days of storage. Rutin exerted a protective effect by both preventing damage to the liposome bilayer and maintaining the spherical structure after 56 days of storage. Lyophilization caused an increase in the size of the vesicles, reaching sizes around 419 nm and aggregation of vesicles with probably structural damage after 21 storage days. However, it helped to keep the rutin encapsulated (81.9%) for longer time, when compared to refrigerated liposomes. Rheological measurements showed, in general, that the power law model fitted most of the experimental results and dynamic rheological tests showed a sol-gel phase transition between 35 and 45 °C. Lyophilization caused a significant change in all evaluated rheological parameters. For the in vitro release tests, the liposomal bilayer acted as a barrier for the rutin release to the food simulating medium; therefore, the release rate of the antioxidant from the rutin encapsulated liposome was slow compared to the free rutin release rate.

Humectability and physical properties of hydroxypropyl methylcellulose coatings with liposome-cellulose nanofibers: Food application

The objective of this study was to investigate the physical, rheological and humectability properties of edible coating forming suspensions (ECS) based on hydroxypropyl methylcellulose (HPMC) containing: liposomes that encapsulate rutin, glycerol and cellulose nanofibers on sliced surfaces of almonds and chocolate. On average, liposomes measured between 110.6 ± 10.0 nm and were characterized as stable and homogeneous suspensions. Adding these liposomes to the edible coatings produced significant changes (p< 0.05) in the density and surface tension, which favor the final appearance of the coating. The presence of liposomes increased the apparent viscosity of the ECS, showing a purely viscous and fluid behavior with a good fit (R² = 0.9996) with the Power Law model. The presence of liposomes and cellulose nanofibers decreased the value of the cohesive energy of the ECS. The studied ECS partially hydrate the surfaces of almond and chocolate as they showed contact angles under 90°.

pH-responsive chimeric liposomes: From nanotechnology to biological assessment

The utilization of liposomes in biomedical applications has greatly benefited the diagnosis and treatment of various diseases. These biomimetic nano-entities have been very useful in the clinical practice as drug delivery systems in their conventional form, comprising lipids as structural components. However, the scientific efforts have recently shifted towards the development of more sophisticated nanotechnological platforms, which apply functional biomaterials, such as stimuli-responsive polymers, in order to aid the drug molecule targeting concept. These nanosystems are defined as chimeric/mixed, because they combine more than one different in nature biomaterials and their development requires intensive study through biophysical and thermodynamic approaches before they may reach in vivo application. Herein, we designed and developed chimeric liposomes, composed of a phospholipid and pH-responsive amphiphilic diblock copolymers and studied their morphology and behavior based on crucial formulation parameters, including biomaterial concentration, dispersion medium pH and polymer composition. Additionally, their interactions with biological components, pH-responsiveness and membrane thermodynamics were assessed. Finally, preliminary in vivo toxicity experiments of the developed nanosystems were carried out, in order to establish a future protocol for full in vivo evaluation. The results have been correlated with the properties of the chimeric nanosystems and highlight the importance of such approaches for designing and developing effective nanocarriers for biomedical applications.