Arsenic(V) removal by granular adsorbents made from water treatment residuals materials and chitosan

Recent Advancements in the Field of Chitosan/Cellulose-Based Nanocomposites for Maximizing Arsenic Removal from Aqueous Environment

Water remediation, acknowledged as a significant scientific topic, guarantees the safety of drinking water, considering the diverse range of pollutants that can contaminate it. Among these pollutants, arsenic stands out as a particularly severe threat to human health, significantly compromising the overall quality of life. Despite widespread awareness of the harmful effects of arsenic poisoning, there remains a scarcity of literature on the utilization of biobased polymers as sustainable alternatives for comprehensive arsenic removal in practical concern. Cellulose and chitosan, two of the most prevalent biopolymers in nature, provide a wide range of potential benefits in cutting-edge industries, including water remediation. Nanocomposites derived from cellulose and chitosan offer numerous advantages over their larger equivalents, including high chelating properties, cost-effective production, strength, integrity during usage, and the potential to close the recycling loop. Within the sphere of arsenic remediation, this Review outlines the selection criteria for novel cellulose/chitosan-nanocomposites, such as scalability in synthesis, complete arsenic removal, and recyclability for technical significance. Especially, it aims to give an overview of the historical development of research in cellulose and chitosan, techniques for enhancing their performance, the current state of the art of the field, and the mechanisms underlying the adsorption of arsenic using cellulose/chitosan nanocomposites. Additionally, it extensively discusses the impact of shape and size on adsorbent efficiency, highlighting the crucial role of physical characteristics in optimizing performance for practical applications. Furthermore, this Review addresses regeneration, reuse, and future prospects for chitosan/cellulose-nanocomposites, which bear practical relevance. Therefore, this Review underscores the significant research gap and offers insights into refining the structural features of adsorbents to improve total inorganic arsenic removal, thereby facilitating the transition of green-material-based technology into operational use.

A graphene oxide based composite granule for methylene blue separation from aqueous solution: Adsorption, kinetics and thermodynamic studies

Graphene oxide and chitosan composite material using as a high-efficiency and low-cost granular adsorbent for methylene blue removal was fabricated via self-assembling method. The effects of pH value, contact time, initial concentration, adsorbent dose, temperature, and recyclic stability on the adsorption performance of methylene blue in aqueous solution were investigated in detail. Desorption process with the effects of solvents, contact time, and temperature were also conducted carefully in this study. The adsorption kinetics and adsorption isotherm of dye adsorption process showed that dye adsorption process was fitted to the pseudo-second-order kinetic model and the Freundlich adsorption isotherm, indicating a physical adsorption process with multilayer adsorption. The intra-particle diffusion model indicated that the dye adsorption by the granular adsorbent was strongly happened during the first 4 h. The thermodynamic study showed that the adsorption was a spontaneous and exothermic process and dye ions were condensed onto the surface of adsorbent. The maximum adsorption capacity of dye on the granular adsorbent was calculated as 951.35 mg/g and the adsorbent could maintain its adsorption performance after six cycles. In general, this study provided an efficient, cost-effective, and recyclable the granular adsorbent for dye separation from aqueous solution.

Arbuscular mycorrhizal fungi enhanced the drinking water treatment residue-based vertical flow constructed wetlands on the purification of arsenic-containing wastewater

Arsenic (As) is a toxic metalloid that poses a potential risk to the environment and human health. In this study, drinking water treatment residue (DWTR) and ceramsite-based vertical flow constructed wetlands (VFCWs) were built to purify As-containing wastewater. As a method of bioaugmentation, arbuscular mycorrhizal fungi (AMF) was inoculated to Pteris vittata roots to enhance the As removal of the VFCWs. The results showed that the As removal rates reached 87.82-94.29% (DWTR) and 33.28-58.66% (ceramsite). DWTR and P. vittata contributed 64.33-72.07% and 7.57-29% to the removal of As, while AMF inoculation intensified the As accumulation effect of P. vittata. Proteobacteria, the main As3+ oxidizing bacteria in the aquatic systems, dominated the microbial community, occupying 72.41 ± 7.76%. AMF inoculation increased As-related functional genes abundance in DWTR-based wetlands and provided a reliable means of arsenic resistance in wetlands. These findings indicated that the DWTR-based VFCWs with AMF inoculated P. vittata had a great purification effect on As-containing wastewater, providing a theoretical basis for the application of DWTR and AMF for As removal in constructed wetlands.

Recent advances in removal of inorganic anions from water by chitosan-based composites: A comprehensive review

Chitosan is a modified natural carbohydrate polymer that has been found in the exoskeletons of crustaceans (e.g., lobsters, shrimps, krill, barnacles, crayfish, etc.), mollusks (octopus, oysters, squids, snails), algae (diatoms, brown algae, green algae), insects (silkworms, beetles, scorpions), and the cell walls of fungi (such as Ascomycetes, Basidiomycetes, and Phycomycetes; for example, Aspergillus niger and Penicillium notatum). However, it is mostly acquired from marine crustaceans such as shrimp shells. Chitosan-based composites often present superior chemical, physical, and mechanical properties compared to single chitosan by incorporating the benefits of both counterparts in the nanocomposites. The tunable surface chemistry, abundant surface-active sites, facilitation synthesize and functionalization, good recyclability, and economic viability make the chitosan-based materials potential adsorbents for effective and fast removal of a broad range of inorganic anions. This article reviews the different types of inorganic anions and their effects on the environment and human health. The development of the chitosan-based composites synthesis, the various parameters like initial concentration, pH, adsorbent dosage, temperature, the mechanism of adsorption, and regeneration of adsorbents are discussed in detail. Finally, the prospects and technical challenges are emphasized to improve the performance of chitosan-based composites in actual applications on a pilot or industrial scale.

Efficient Removal of Heavy Metals from Aqueous Solution Using Licorice Residue-Based Hydrogel Adsorbent

The removal of heavy metals through adsorption represents a highly promising method. This study focuses on the utilization of an abundant cellulose-rich solid waste, licorice residue (LR), as a natural material for hydrogel synthesis. To this end, LR-EPI hydrogels, namely, LR-EPI-5, LR-EPI-6 and LR-EPI-8, were developed by crosslinking LR with epichlorohydrin (EPI), specifically targeting the removal of Pb, Cu, and Cr from aqueous solutions. Thorough characterizations employing Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy confirmed the successful crosslinking of LR-EPIs by EPI, resulting in the formation of porous and loosely structured hydrogels. Batch studies demonstrated the high efficacy of LR-EPI hydrogels in removing the three heavy metal ions from aqueous solutions. Notably, LR-EPI-8 exhibited the highest adsorption capacity, with maximum capacities of 591.8 mg/g, 458.3 mg/g, and 121.4 mg/g for Pb²⁺, Cr³⁺, and Cu²⁺, respectively. The adsorption processes for Pb²⁺ and Cu²⁺ were well described by pseudo-second-order kinetics and the Langmuir model. The adsorption mechanism of LR-EPI-8 onto heavy metal ions was found to involve a combination of ion-exchange and electrostatic interactions, as inferred from the results obtained through X-ray photoelectron spectroscopy and FTIR. This research establishes LR-EPI-8 as a promising adsorbent for the effective removal of heavy metal ions from aqueous solutions, offering an eco-friendly approach for heavy metal removal and providing an environmentally sustainable method for the reutilization of Chinese herb residues. It contributes to the goal of "from waste, treats waste" while also addressing the broader need for heavy metal remediation.

Heavy metals in vegetables: a review of status, human health concerns, and management options

For sustainable global growth, food security is a prime concern issue, both quantitatively and qualitatively. Adverse effects on crop quality from contaminants like heavy metals have affected food security and human health. Vegetables comprise the essential and nutritious part of the human diet as they contain a lot of health-promoting minerals and vitamins. However, the inadvertent excess accumulation of heavy metals (As, Cd, Hg, and Pb) in vegetables and their subsequent intake by humans may affect their physiology and metabolomics and has been associated with diseases like cancer, mental retardation, and immunosuppression. Many known sources of hazardous metals are volcano eruptions, soil erosion, use of chemical fertilizers in agriculture, the use of pesticides and herbicides, and irrigation with wastewater, industrial effluents, etc. that contaminate the vegetables through the soil, air and water. In this review, the problem of heavy metal contamination in vegetables is discussed along with the prospective management strategies like soil amendments, application of bioadsorbents, membrane filtration, bioremediation, and nanoremediation.

Application of modified water treatment residuals in water and wastewater treatment: A review

Large quantities of sludge known as water treatment residuals (WTRs) are generated from water treatment facilities across the world. Various attempts have been made to reuse these residuals. Among the different applications of WTRs, their reuse in water and wastewater treatment has received more attention. However, direct application of raw WTRs is associated with some limitations. In the last decade, in order to improve their characteristics, numerous investigators have modified WTRs by different methods. This paper reviews the different methods applied to WTRs to enhance their characteristics. The effects of these modifications on their characteristics are explained. The applications of modified WTRs as a filtration/adsorption medium for treating textile/dye wastewater, groundwater containing different anionic and cationic pollutants, storm water runoff, and as a substrate in constructed wetlands are presented in detail. Future research needs are highlighted. The review clearly indicates the potential of different modification methods to improve the removal of a variety of pollutants by WTRs from water and wastewater.

A comparative study on Fe(III)-chitosan and Fe(III)-chitosan-CTAB composites for As(V) removal from water: preparation, characterization and reaction mechanism

Fe(III)-chitosan and Fe(III)-chitosan-CTAB composites were prepared using an ionotropic gelation method. Various techniques were used to analyze the morphology, structure, and property of the adsorbents, including SEM, EDS, FT-IR, XPS, and zeta potential. Compared with Fe(III)-chitosan, Fe(III)-chitosan-CTAB was more effective for As(V) adsorption at a wide range of pH (3.0-8.0). The adsorption of As(V) onto Fe(III)-chitosan and Fe(III)-chitosan-CTAB could reach equilibrium in 20 min, and their maximum adsorption capacities were 33.85 and 31.69 mg g^‒1, respectively. The adsorption kinetics was best described by the pseudo-second-order model (R² = 0.998 and 0.992), whereas the adsorption isotherm was fitted well by the Freundlich model (R² = 0.963 and 0.987). The presence of H₂PO₄^- significantly inhibited the adsorption of As(V) onto Fe(III)-chitosan and Fe(III)-chitosan-CTAB, and humic acid also led to a slight decrease in As(V) adsorption by Fe(III)-chitosan-CTAB. Over 94% of As(V) at the initial concentration of no more than 5 mg L^-1 was removed from real water by the two adsorbents. 1% (w/v) NaOH solution was determined to be the most suitable desorption agent. Fe(III)-chitosan and Fe(III)-chitosan-CTAB still maintained their initial adsorption capacities after five adsorption-desorption cycles. Based on different characterization results, both electrostatic attraction and surface complexation mechanisms played important roles in As(V) adsorption on Fe(III)-chitosan and Fe(III)-chitosan-CTAB.

A comprehensive review on the coagulant recovery and reuse from drinking water treatment sludge

The main treatment unit in conventional systems for surface water is coagulation-flocculation (CF) process, which consumes huge quantities of coagulant, and produces large volume of sludge. The produced sludge is known as one of the components of water treatment sludge (WTS), which is considered as a global issue and hot topic require careful attention from the plant operators and sludge managers to be managed sustainably with applying an ecofriendly method. Among the suggested technologies, recovery and reuse of coagulants from WTS show the potential to decrease the waste disposal and chemicals usage for drinking water treatment significantly. So, this comprehensive review provides a useful insight into environmental and health problems of WTS, reports the sources, physicochemical properties of sludge, describes different sludge management methods by more focus on coagulant recovery (CR), which significantly point out the different aspects of WTS recovery and reuse, and eventually, economic evaluation of the CR process was also discussed. The results of this review confirm that coagulants can be recovered from WTS by different methods and also will be reused for multiple times in the removal of pollutants from water and wastewater. Moreover, the recovered coagulants can be used as building and construction materials, constructed wetlands substrate and other aims.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pHPZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.

Chitosan magnetic graphene grafted polyaniline doped with cobalt oxide for removal of Arsenic(V) from water

The present study reports the successful functionalization/magnetization of bio-polymer to produce chitosan-magnetic graphene oxide grafted polyaniline doped with cobalt oxide (ChMGOP-Co₃O₄). Analytical techniques furrier transform infra-red (FT-IR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to confirm the formation of ChMGOP-Co₃O₄. The effects of several experimental factors (solution pH, adsorbent dosage and coexisting ions) on the uptake of As(V) ions using ChMGOP-Co₃O₄ were examined through batch experiments. As(V) removal process was validated by experimentally and theoretically investigating the adsorption capacity, rate, and thermal effects. Thermodynamic parameters such as free energy (ΔG°), entropy (ΔS°) and enthalpy (ΔH°) were also calculated and were used to explain the mechanism of adsorption. Based on the results, the sorbent showed a high adsorption capacities (90.91 mg/g) at favorable neutral pH and superior removal efficiencies as high as 89% within 50 min. In addition, the adsorption isotherm followed the Langmuir isotherm in compare to the Freundlich, due to its higher R² value (0.992 < 0.941). Meanwhile, the kinetic data revealed that the of As(V) adsorption was controlled by pseudo-second-order. Overall, the adsorption mechanism studies revealed a spontaneous endothermic nature with predominance of physisorption over chemisorption. This study indicated that ChMGOP-Co₃O₄ is an exceptional novel adsorbent material for the efficient isolation of As(V) from aqueous media.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Study on the Performance of Composite Adsorption of Cu2+ by Chitosan/β-Cyclodextrin Cross-Linked Zeolite

In order to remove Cu2+ from wastewater, a kind of microsphere adsorbent (SCDO) with high efficiency for Cu2+ adsorption was prepared by the microdrop condensation method, where chitosan (CTS) and sodium alginate (SA) were used as the matrix to crosslink β-cyclodextrin (β-CD) and zeolite (Zeo). The structure and properties of SCDO were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Upon that, the adsorption performance of SCDO for Cu2+ was studied, in which the effects of pH, initial concentration, dosage, adsorption time and temperature were investigated. The results showed that the removal rate of Cu2+ reached 97.08%, and the maximum adsorption capacity was 24.32 mg/g with the temperature at 30 °C, the dosage of SCDO at 12 g/L, the initial concentration of Cu2+ at 100 mg/L, the pH of the solution at 6.0 and the adsorption time at 120 min, respectively. The adsorption process of Cu2+ by SCDO occurred in accordance with quasi-second-order kinetics model and Langmuir adsorption isotherm. After four repeats of continuous adsorption and desorption, the regenerative removal rate of Cu2+ could still reach 84.28%, which indicated that SCDO had outstanding reusability.

New material for arsenic (V) removal based on chitosan supported onto modified polypropylene membrane

This paper presents a new material easily synthesized and with low cost, with the possibility of remove arsenic and the potential capability for the remediate water bodies. In this work, the efficiency in removing arsenic of the chitosan, supported onto modified polypropylene membrane, was studied using an aqueous As(V) solution of 0.4 mg/L, achieving a removal efficiency of 75%, which corresponds to an adsorption capacity of 0.031 mg/g. The As(V) adsorption depends on pH and the degree of chitosan grafting on the polypropylene membrane. A pseudo-second-order equation describes the adsorption of the membrane, classifying it as a chemisorption process. The chitosan supported on the membrane was characterized by the analysis of wettability, FT-IR-ATR, SEM-EDS, XRD powder, and surface charge. The As ions coordinate to the chitosan polar groups, allowing their removal from the aqueous solution.

Arsenic removal approaches: A focus on chitosan biosorption to conserve the water sources

Globally, millions of people have no access to clean drinking water and are either striving for that or oppressed to intake polluted water. Arsenic is considered one of the most hazardous contaminants in water bodies that reaches there due to various natural and anthropogenic activities. Modified chitosan has gained much attention from researchers due to its potential for arsenic removal. This review focuses on the need and potential of chitosan-based biosorbents for arsenic removal from water systems. Chitosan is a low-cost, abundant, biodegradable biopolymer that possesses unique structural aspects and functional sites for the adsorption of contaminants like arsenic species from contaminated water. The chitosan-based biosorbents had also been modified using various techniques to enhance their arsenic removal efficiencies. This article reviews various forms of chitosan and parameters involved in chitosan modification which eventually affect the arsenic removal efficiency of the resultant sorbents. The literature revealed that the modified chitosan-based sorbents could express higher adsorption efficiency compared to those prepared from native chitosan. The sustainability of the chitosan-based sorbents has also been considered in terms of reusability. Finally, some recommendations have been underlined for further improvements in this domain.

Efficient removal arsenate from water by biochar-loaded Ce3+-enriched ultra-fine ceria nanoparticles through adsorption-precipitation

Biochar-loaded Ce³⁺-enriched ultra-fine ceria nanoparticles (Ce-BC) were used as a novel nanostructured adsorbent for the removal of arsenate (As(V)) from aqueous solutions. The effect of cerium valence on As(V) adsorption and the mechanism of As(V) adsorption onto Ce-BC were investigated using batch experiments and a series of spectroscopy detection technologies. The adsorption isotherm data fitted with the Langmuir model, with maximum As(V) sorption capacity of 219.8 mg g^-1 at pH 5.0 and 25 °C. The adsorption kinetics fitted well with the pseudo-second-order model. Ce³⁺ on the surface of Ce-BC plays an important role in the adsorption of As(V). The decrease in Ce³⁺ concentration from 60.1% to 48.9% on the Ce-BC surface, significantly decreased the adsorption of As(V) on Ce-BC. Furthermore, a strong affinity between As(V) and Ce³⁺-enriched Ce-BC was revealed, resulting in irreversible adsorption. Most importantly, the adsorbed As(V) could further react with Ce³⁺ of the ultra-fine cerium oxide nanoparticles in Ce-BC to form rod-like CeAsO₄ precipitates. Through the novel adsorption-precipitation process, Ce-BC can be used to remove trace As(V).

Performance of a novel iron infused biochar developed from Raphanus sativus and Artocarpus heterophyllus refuse for trivalent and pentavalent arsenic adsorption from an aqueous solution: mechanism, isotherm and kinetics study

Fabrication of magnetic biochar was done by pyrolysis of waste leaves of Raphanus sativus (MRB) and Artocarpus heterophyllus (MJB) peel pretreated with FeCl₃ was examined for As(III and V) adsorption from an aqueous solution. The synthesized bioadsorbents were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), particle size analysis (PSA), scanning electron microscope (SEM), energy dispersive x-ray (EDX), zeta potential, Vibrating sample magnetometer (VSM) and point of zero charge (pH_ZPC). MRB-800 exhibits greater efficiency toward the removal of both As species with q_max value 2.08 mg/g for As(III) and 2.03 mg/g for As(V). Whereas, the q_max value was 1.13 mg/g for As (III) and 1.26 mg g^-1 for As (V) adsorption using MJB-800. Temkin and Freundlich isotherm were best fitted to the adsorption of As(III) and As(V) by MRB-800, respectively. Langmuir isotherm was best followed to the adsorption of As (III and V) by MJB-800. Pseudo-second-order kinetics was well simulated by the experimental data of As adsorption using both the bioadsorbents. Surface complexation and electrostatic attraction was dominant mechanism for As (III) and As (V) adsorption. Thermodynamic study shows that removal of As (III) was exothermic while the As (V) adsorption was endothermic for MRB-800 and MJB-800.

Preparation and Characterization of Sludge-Based Magnetic Biochar by Pyrolysis for Methylene Blue Removal

The development of low-cost adsorbent is an urgent need in the field of wastewater treatment. In this study, sludge-based magnetic biochar (SMB) was prepared by pyrolysis of sewage sludge and backwashing iron mud without any chemical agents. The samples were characterized by TGA, XRD, ICP, Organic element analysis, SEM, TEM, VSM and BET. Characterization analysis indicated that the magnetic substance in SMB was Fe₃O₄, and the saturation magnetization was 25.60 emu·g^-1, after the adsorption experiment, SMB could be separated from the solution by a magnet. The batch adsorption experiment of methylene blue (MB) adsorption showed that the adsorption capacities of SMB at 298 K, 308 K and 318 K were 47.44 mg·L^-1, 39.35 mg·L^-1, and 25.85 mg·L^-1, respectively. After one regeneration with hydrochloric acid, the maximum adsorption capacity of the product reached 296.52 mg·g^-1. Besides, the adsorption kinetic described well by the pseudo-second order model revealed that the intraparticle diffusion was not just the only rate controlling step in adsorption process. This study gives a reasonable reference for the treatment of sewage sludge and backwashing iron mud. The product could be used as a low-cost adsorbent for MB removal.

Synthesis of Fe3O4@mZrO2-Re (Re = Y/La/Ce) by Using Uniform Design, Surface Response Methodology, and Orthogonal Design & Its Application for As3+ and As5+ Removal

In this study, iron oxide (Fe₃O₄) was coated with ZrO₂, and doped with three rare earth elements((Y/La/Ce), and a multi-staged rare earth doped zirconia adsorbent was prepared by using uniform design U₁₄, Response Surface methodology, and orthogonal design, to remove As³⁺ and As⁵⁺ from the aqueous solution. Based on the results of TEM, EDS, XRD, FTIR, and N₂-adsorption desorption test, the best molar ratio of Fe₃O₄:TMAOH:Zirconium butoxide:Y:La:Ce was selected as 1:12:11:1:0.02:0.08. The specific surface area and porosity was 263 m²/g, and 0.156 cm³/g, respectively. The isothermal curves and fitting equation parameters show that Langmuir model, and Redlich Peterson model fitted well. As per calculations of the Langmuir model, the highest adsorption capacities for As³⁺ and As⁵⁺ ions were recorded as 68.33 mg/g, 84.23 mg/g, respectively. The fitting curves and equations of the kinetic models favors the quasi second order kinetic model. Material regeneration was very effective, and even in the last cycle the regeneration capacities of both As³⁺ and As⁵⁺ were 75.15%, and 77.59%, respectively. Adsorption and regeneration results suggest that adsorbent has easy synthesis method, and reusable, so it can be used as a potential adsorbent for the removal of arsenic from aqueous solution.

Investigation of the combined use of capping and oxidizing agents in the immobilization of arsenic in sediments

The combined use of capping (lanthanum modified bentonite; LMB) and oxidizing (calcium nitrate; CN) agents was investigated to immobilize arsenic (As) in sediments. The vertical changes in labile As and dissolved As were measured using diffusive gradients in thin films (DGT) and Rhizon devices. The results showed that the combined application of LMB and CN had the optimal effect on the immobilization of both DGT-labile As and dissolved As, compared to single treatments using LMB or CN. After 60 days of incubation, the maximum reduction efficiencies of DGT-labile As at sediment depths were 76.4%, 70.8%, and 44.9% of those treated with LMB + CN, CN, and LMB, respectively. After 32 days of incubation, the average concentrations of dissolved total As throughout the depths decreased from 7.71 μg/L after the control treatment without any amendments to 5.25, 4.03, and 3.15 μg/L after the addition of LMB, CN, and LMB + CN, respectively. The larger part of exchangeable As at sediment depths was converted into the reducible As mainly bound Fe/Mn oxide-hydroxides after combining LMB and CN. Due to the As(III) existing mainly in the form of electrically neutral H₃AsO₃ in sediments, it is hard to adsorb As(III) for the LMB and iron/manganese oxide-hydroxides formed by the oxidation effect of calcium nitrate. Thus, the single or combined LMB and CN use had much weaker effect on the immobilization of As(III) compared with As(V). The results of current study indicated that the combined use of LMB and CN could be a promising method to control the potential release of As from the sediment to the overlying water. However, this method needs further improvement to achieve a better immobilization effect on As(III) in sediments.

Preparation of adsorbent based on water treatment residuals and chitosan by homogeneous method with freeze-drying and its As(V) removal performance

Although the chitosan-WTRs particulate adsorbent prepared by embedding method has been proved to have arsenic adsorption capacity, the capacity of it is greatly weakened compared with the original water treatment residuals (WTRs). In this study, WTRs and chitosan were used as raw materials to prepare a new kind of adsorbent beads by a homogeneous method. At the same time, in order to enhance the adsorption capacity and reduce the limitation of kinetics, freeze-drying method was chosen to dry the adsorbent. The WTRs-chitosan beads by homogeneous method (WCB) were characterized by SEM, XRD, XPS and other methods. According to the characterization results, there are regularly arranged pores inside the particles, and the iron in the particles mainly exists in the form of amorphous iron oxyhydroxide. According to the results of batch experiment, the pseudo-second-order kinetic model has a higher degree of fit, indicating that the WCB adsorbs As(V) mainly by chemical adsorption. The maximum adsorption capacity estimated from the Langmuir isotherm model is 42.083 mg/g, which is almost same as the WTRs. Weak acid and neutral conditions are conducive to adsorption, while alkaline conditions have a significant inhibitory effect on arsenic adsorption.

Pelletized adsorbent of alum sludge and bentonite for removal of arsenic

Powder adsorbents show an excellent adsorption capacity for arsenic(As) due to the large specific surface area. However, the performance of powder adsorbents decreases significantly by channeling in the adsorption bed, and the powder is released from the bed. Pelletization of power adsorbent can solve the problems, and bentonite was proposed as a binder to improve the strength. The adsorption capacity and lifetime of pelletized adsorbent were evaluated through a batch and column study. The addition of bentonite decreased adsorption capacity by 16% of pellet without bentonite, but improved compressive strength of adsorbent up to 3.6 times. In the batch test, the maximum adsorption capacity of pelletized adsorbent is 22.2 mg As/g, which is about 40% of powder adsorbent. However, in the column study, pellet adsorbent showed similar adsorption performance and lifetime to commercial and powder adsorbent. As a result, the pellet adsorbent using bentonite is a potential low-cost adsorbent to remove effectively As in the aqueous phase.

Enhanced removal of heavy metals and phosphate in stormwater filtration systems amended with drinking water treatment residual-based granules

To address the clogging issues in stormwater filtration systems, a drinking water treatment residual (DWTR)-based granule (DBG) substrate was developed herein by pyrolyzing and granulating the DWTR with bentonite and corncob. Toxicity characteristic leaching procedure studies indicated that fabricating into DBG stabilized the Al and heavy metals in DWTR and restrained the leaching risk. Then the removal performance of phosphate (PO₄-P) and heavy metal ions by the DWTR and DBG was evaluated in batch and laboratory-scale column experiments. Results from batch tests showed that the amount of Pb(Ⅱ) adsorbed by DBG (18.47 ± 0.56 mg g⁻¹) was approximately 2.3 times of that adsorbed by DWTR (8.05 ± 0.19 mg g⁻¹), whereas the PO₄-P adsorption capacity of DBG (8.63 ± 0.24 mg g⁻¹) was much lower than that of DWTR (25.33 ± 0.81 mg g⁻¹). This could be ascribed to the addition of corncob and bentonite (at a mass ratio of 20% and 40% in DBG, respectively), which provided extremely high cation exchange capacity for the Pb(Ⅱ) adsorption, while no effective PO₄-P adsorption component was involved. Moreover, the pyrolysis process could improve the Pb(Ⅱ) and PO₄-P adsorption capacity of the raw-mixture by 42% and 7%, whereas granulation process decreased those of the pyrolysis-mixture by 15% and 20%, respectively, owing to the reduction of accessible surface area in the DBG. Under various stormwater runoff conditions, the involvement of DBG in stormwater filtration systems exerted consistently fancy performance of Cu(Ⅱ), Pb(Ⅱ), Cd(Ⅱ) and PO₄-P removal, with average removal rates of over 86.20% and desorption rates of less than 3.50%, indicating irreversible and strong complexion between the contaminants and DBG. The DBG column manifested good permeability and stable hydraulic conductivity (2.74-2.52 m d⁻¹) over a 54-day rainfall period, which was beneficial to address the clogging issue of DWTR. Overall, this study provides an alternative pathway to enhance the hydraulic condition and treatment performance of the stormwater filtration systems for urban runoff management.

Current Trends of Arsenic Adsorption in Continuous Mode: Literature Review and Future Perspectives

Arsenic is a toxic element for humans and a major pollutant in drinking water. Natural and anthropogenic sources can release As into water bodies. The countries with the greatest arsenic contamination issues lack the affordable technology to attain the maximum permitted concentrations. Adsorption can be a highly efficient and low-cost option for advanced water treatment, and the development of new cheap adsorbents is essential to expand access to water with a safe concentration of arsenic. This paper aims to review the state of the art of arsenic adsorption from water in continuous mode and the latest progress in the regeneration and recovery of arsenic. The disposal of the exhausted bed is also discussed. Fixed-bed column tests conducted with novel adsorbents like binary metal oxides and biosorbents achieved the highest adsorption capacities of 28.95 mg/g and 74.8 mg/g, respectively. Iron-coated materials presented the best results compared to adsorbents under other treatments. High recovery rates of 99% and several cycles of bed regeneration were achieved, which can aggregate economic value for the process. Overall, further pilot-scale research is recommended to evaluate the feasibility of novel adsorbents for industrial purposes.

Arsenic (V) Removal by an Adsorbent Material Derived from Acid Mine Drainage Sludge

Arsenic is a toxic element that is often found in drinking water in developing countries in Asia, while arsenic poisoning is a serious worldwide human health concern. The objective of this work is to remove arsenic (V) (As(V)) from water by using an adsorbent material prepared from mine waste, called MIRESORBTM, which contains Fe, Al. The performance of the MIRESORBTM adsorbent was compared with granular ferric hydroxide (GFH), which is a commercial adsorbent. Adsorbents were characterized by using scanning electron microscopy (SEM), X-ray fluorescence spectroscopy (XRF), X-ray diffractometry (XRD), and N2 sorption with Brunauer–Emmett–Teller (BET) analysis. The kinetics, isotherms, and pH-dependency of arsenic adsorption were interrogated to gain insights into arsenic adsorption processes. The maximum adsorption capacity of MIRESORBTM was 50.38 mg/g, which was higher than that of GFH (29.07 mg/g). Moreover, a continuous column test that used environmental samples of acid mine drainage was conducted to evaluate the MIRESORBTM material for practical applications. The column could be operated for more than 5840 bed volumes without a breakthrough. Successful operation of a pilot plant using MIRESORBTM adsorbent was also reported. Thus, these studies demonstrate MIRESORBTM as a highly efficient and economical adsorbent derived from recycled mine sludge waste.

N-Alkylated chitosan coupled to the liquid-phase polymer-based retention (LPR) technique to remove arsenic (V) from aqueous systems

Water-soluble polymer based on alkylated chitosan with a quaternary ammonium group (Ch-QAG) was prepared, characterized, and applied to remove arsenate ions from aqueous solution by LPR technique. The arsenic removal was performed by the washing method (WM) and enrichment method (EM). Through the WM, studies of the pH and variation in the concentrations of interferents and arsenate ions were carried out. The effect of the removal of arsenate ions in simulated water was determined from the Camarones River in northern Chile. Ch-QAG showed high affinity for binding arsenate species (99% of removal) at pH 11.0 at a molar ratio of 20:1 polymer: As(V). High selectivity was also observed in the presence of interfering ions such as Cl^-, SO₄^2-, and PO₄^3-, resulting in a removal rate over 80% at percentages over 95% for a concentration of 100 mg L^-1 of As (V). The maximum retention capacity obtained was 112, 105, and 98 mg g^-1 for three load cycles. The retention percentage for simulated water was 46.3% at a concentration of 1300 μ g L^-1. In conclusion, the results presented in this study show that using Ch-QAG with ultrafiltration membranes is a great alternative to remove As (V) at high removal rates.