Biochar stabilized nano zero-valent iron and its removal performance and mechanism of pentavalent vanadium(V(V))

Deep-sea microorganisms-driven V5+ and Cd2+ removal from vanadium smelting wastewater: Bacterial screening, performance and mechanism

The disorderly discharge of industrial wastewater containing heavy metals has caused serious water pollution and ecological environmental risks, ultimately threatening human life and health. Biological treatment methods have obvious advantages, but the existing microorganisms exhibit issues such as poor resistance, adaptability, colonization ability, and low activity. However, a wide variety of microorganisms in deep-sea hydrothermal vent areas are tolerant to heavy metals, possessing the potential for efficient treatment of heavy metal wastewater. Based on this, the study obtained a group of deep-sea microbial communities dominated by Burkholderia-Caballeronia-Paraburkholderia through shake flask experiments from the sediments of deep-sea hydrothermal vents, which can simultaneously achieve the synchronous removal of vanadium and cadmium heavy metals through bioreduction, biosorption, and biomineralization. Through SEM-EDS, XRD, XPS, and FT-IR analyses, it was found that V(V) was reduced to V(IV) through a reduction process and subsequently precipitated. Glucose oxidation accelerated this process. Cd(II) underwent biomineralization to form precipitates such as cadmium hydroxide and cadmium carbonate. Functional groups on the microbial cell surface, such as -CH2, C=O, N-H, -COOH, phosphate groups, amino groups, and M-O moieties, participated in the bioadsorption processes of V(V) and Cd(II) heavy metals. Under optimal conditions, namely a temperature of 40 °C, pH value of 7.5, inoculation amount of 10%, salinity of 4%, COD concentration of 600 mg/L, V5+ concentration of 300 mg/L, and Cd2+ concentration of 40 mg/L, the OD600 can reach its highest at 72 h, with the removal efficiency of V5+, Cd2+, and COD in simulated vanadium smelting wastewater reaching 86.32%, 59.13%, and 61.63%, respectively. This study provides theoretical insights and practical evidence for understanding the dynamic changes in microbial community structure under heavy metal stress, as well as the resistance mechanisms of microbial treatment of industrial heavy metal wastewater.

Remediation on antimony-contaminated soil from mine area using zero-valent-iron doped biochar and their effect on the bioavailability of antimony

Due to the bioavailability and movement of antimony in trophic web, the overexploitation of antimony mine resulted in antimony contamination that harmed the ecology nearby, raising concerns for public health. Whereas, most researches focused on the removal of antimony in the aqueous instead of the immobilization of antimony in the soil. Herein, the immobilized performance of biochar (BC) loaded with nano zero-valent iron (nZVI-BC) on antimony in the soil near the smelting area was researched through pot experiments for the first time, and its stabilization mechanism on antimony was investigated by valent state variation of antimony. The results demonstrated that BC restricted the cation exchange capacity and catalase activity in the soil, while nZVI-BC had a favorable and negative impact on two variables, respectively. The nZVI-BC showed more stable immobilization capacity on antimony over time than BC, whose exchangeable speciation only marginally rose (2%-6%), although the exchangeable speciation of antimony fell both from 15% to 2% after adding the BC and nZVI-BC, The electron attraction force between nZVI-BC and antimony was also intensified owing to the oxidation-reduction process, which was considered as the stabilizing principle of nZVI-BC on antimony in soil. Furthermore, the decreased bioaccumulation factor for the perennial ryegrass (0.46-0.21) and Galinsoga parviflora Cav. (0.26-0.17) stated that the BC effectively mitigated the bioaccumulation risk of antimony.

Adsorptive removal of heavy metals from aqueous solutions: Progress of adsorbents development and their effectiveness

Increased levels of heavy metals (HMs) in aquatic environments poses serious health and ecological concerns. Hence, several approaches have been proposed to eliminate/reduce the levels of HMs before the discharge/reuse of HMs-contaminated waters. Adsorption is one of the most attractive processes for water decontamination; however, the efficiency of this process greatly depends on the choice of adsorbent. Therefore, the key aim of this article is to review the progress in the development and application of different classes of conventional and emerging adsorbents for the abatement of HMs from contaminated waters. Adsorbents that are based on activated carbon, natural materials, microbial, clay minerals, layered double hydroxides (LDHs), nano-zerovalent iron (nZVI), graphene, carbon nanotubes (CNTs), metal organic frameworks (MOFs), and zeolitic imidazolate frameworks (ZIFs) are critically reviewed, with more emphasis on the last four adsorbents and their nanocomposites since they have the potential to significantly boost the HMs removal efficiency from contaminated waters. Furthermore, the optimal process conditions to achieve efficient performance are discussed. Additionally, adsorption isotherm, kinetics, thermodynamics, mechanisms, and effects of varying adsorption process parameters have been introduced. Moreover, heavy metal removal driven by other processes such as oxidation, reduction, and precipitation that might concurrently occur in parallel with adsorption have been reviewed. The application of adsorption for the treatment of real wastewater has been also reviewed. Finally, challenges, limitations and potential areas for improvements in the adsorptive removal of HMs from contaminated waters are identified and discussed. Thus, this article serves as a comprehensive reference for the recent developments in the field of adsorptive removal of heavy metals from wastewater. The proposed future research work at the end of this review could help in addressing some of the key limitations facing this technology, and create a platform for boosting the efficiency of the adsorptive removal of heavy metals.

Simultaneous immobilization of V and Cr availability, speciation in contaminated soil and accumulation in ryegrass by using Fe-modified pyrolysis char

In this study, municipal waste pyrolytic char (PEWC) was prepared by pyrolysis from municipal solid waste extracted in landfills, and Fe-based modified pyrolytic char (Fe-PEWC) was prepared by modification. Focusing on the evaluation of the stabilization capacity of Fe-PEWC for vanadium (V) and chromium (Cr) in soils, the effects of PEWC addition on soil properties, bioavailability and morphological distribution of V and Cr, ryegrass growth, and V and Cr accumulation were thoroughly investigated. The results of pot experiment showed that the application of PEWC and Fe-PEWC significantly (P < 0.05) improved soil properties (such as pH, EC, total nitrogen, available phosphorus, available potassium, and organic matter). After 42 days of cultivation, Fe-PEWC has a better fixation effect on heavy metals, and the bioavailable V and Cr of 3% Fe-PEWC decreased by 14.96% and 19.48%, respectively. The exchangeable state and reducible state decreased, while the oxidizable state and residual state increased to varying degrees. The Fe-PEWC can effectively reduce the accumulation of V and Cr in ryegrass by 71.25% and 76.43%, respectively, thereby reducing their toxicity to plants. In summary, modified pyrolytic char can effectively solidify heavy metals in soil, improve soil ecology and reduce the toxicity to plants. The use of excavated waste as a raw material for the preparation of soil heavy metal curing agent has the significance of resource recycling, low price, and practical application.

Research Progress on the Degradation of Organic Pollutants in Water by Activated Persulfate Using Biochar-Loaded Nano Zero-Valent Iron

Biochar (BC) is a new type of carbon material with a high specific surface area, porous structure, and good adsorption capacity, which can effectively adsorb and enrich organic pollutants. Meanwhile, nano zero-valent iron (nZVI) has excellent catalytic activity and can rapidly degrade organic pollutants through reduction and oxidation reactions. The combined utilization of BC and nZVI can not only give full play to their advantages in the adsorption and catalytic degradation of organic pollutants, but also help to reduce the agglomeration of nZVI, thus improving its efficiency in water treatment and providing strong technical support for water resources protection and environmental quality improvement. This article provides a detailed introduction to the preparation method and characterization technology, reaction mechanism, influencing factors, and specific applications of BC and nZVI, and elaborates on the research progress of BC-nZVI in activating persulfate (PS) to degrade organic pollutants in water. It has been proven experimentally that BC-nZVI can effectively remove phenols, dyes, pesticides, and other organic pollutants. Meanwhile, in response to the existing problems in current research, this article proposes future research directions and challenges, and summarizes the application prospects and development trends of BC-nZVI in water treatment. In summary, BC-nZVI-activated PS is an efficient technology for degrading organic pollutants in water, providing an effective solution for protecting water resources and improving environmental quality, and has significant application value.

Applications of Green Synthesized Metal Nanoparticles - a Review

Green nanotechnology is an emerging field of science that focuses on the production of nanoparticles by living cells through biological pathways. This topic plays an extremely imperative responsibility in various fields, including pharmaceuticals, nuclear energy, fuel and energy, electronics, and bioengineering. Biological processes by green synthesis tools are more suitable to develop nanoparticles ranging from 1 to 100 nm compared to other related methods, owing to their safety, eco-friendliness, non-toxicity, and cost-effectiveness. In particular, the metal nanoparticles are synthesized by top-down and bottom-up approaches through various techniques like physical, chemical, and biological methods. Their characterization is very vital and the confirmation of nanoparticle traits is done by various instrumentation analyses such as UV-Vis spectrophotometry (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), atomic force microscopy (AFM), annular dark-field imaging (HAADF), and intracranial pressure (ICP). In this review, we provide especially information on green synthesized metal nanoparticles, which are helpful to improve biomedical and environmental applications. In particular, the methods and conditions of plant-based synthesis, characterization techniques, and applications of green silver, gold, iron, selenium, and copper nanoparticles are overviewed.

Calcination-controlled performance optimization of iron-vanadium bimetallic oxide nanoparticles for synergistic tumor therapy

Calcination has been widely demonstrated as a favorable protocol for producing various inorganic nanomaterials for tumor therapy. However, little attention has been paid to its effect on the biotherapeutic efficacy of inorganic nanomaterials. Herein, we compare the effects of different calcination atmospheres on the therapeutic efficacy of Fe-V-O (FVO) nanomaterials. We find that compared with FVO nanomaterials synthesized by calcination in air, those prepared by argon calcination have a lower metallic valence state and a higher near-infrared light absorption capacity, hence resulting in significantly better biosafety and higher chemodynamic therapy (CDT)/photothermal therapy (PTT) efficacy. This study demonstrates that the therapeutic efficacy of inorganic nanomaterials can be optimized by employing different thermal treatment atmospheres, which provides new insights into the development of efficient anti-tumor agents.

Graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) for antimony removal: The role of active oxygen species and reaction mechanism

Sulfidated nano zero-valent iron (S-nZVI) was used to remove various pollutants from wastewater. However, the instability, poor dispersibility, and low electron transfer efficiency of S-nZVI limit its application. Herein, graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) was successfully synthesized using graphene oxide (GO) as a carrier. The properties of S-nZVI@GO were characterized by scanning electron microscopy coupled to X-ray photoelectron spectroscopy (SEM-EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) concerning the surface morphology, crystalline structure, and elemental components. S-nZVI@GO displayed an excellent capacity for antimony (Sb) removal under aerobic conditions (96.7%), with a high adsorption capacity (Q_max = 311.75 mg/g). It maintained a high removal rate (over 90%) during a wide pH range (3-9). More importantly, S-nZVI@GO activated the molecular oxygen in water via a single-electron pathway to produce •O₂－ and H₂O₂, and then oxidized trivalent antimony (Sb(III)) to pentavalent antimony (Sb(V)) and further separated it by synergistic adsorption and co-precipitation. Therefore, S-nZVI@GO shows excellent potential for Sb contamination remediation.

Immobilization on anionic metal(loid)s in soil by biochar: A meta-analysis assisted by machine learning

Metal pollution in soil has become one of the most serious environmental problems in China. Biochar is one of the most widely used remediation agents for soil metal pollution. However, the literature does not provide a consistent picture of the performance of biochar on the immobilization of anionic metal(loid)s, especially arsenic, in soil. To obtain a baseline understanding on the interactions of metals and biochar, 597 data records on four metal(loid)s (As, Cr, Sb and V) were collected from 70 publications for this meta-analysis, and the results are highlighted below. Biochar has a significant immobilization effect on anionic metal(loid)s in soil and reduces the bioavailability of these metals to plants. Subgroup analysis found that biochar could decrease the potential mobility of Cr, Sb and V, but the immobilization effect on As was not always consistent. Meanwhile, biochar pH and soil pH are the most key factors affecting the immobilization effect. To summarize, biochar can effectively immobilize Cr, Sb and V in soil, but more attention should be given to As immobilization in future applications. By regulating the properties of biochar and appropriate modification, anionic metal(loid)s in soil can be immobilized more effectively. Hence, both of the soil quality and crop quality can be improved.

A high-efficient and recyclable aged nanoscale zero-valent iron compound for V5+ removal from wastewater: Characterization, performance and mechanism

An effective complex of nanoscale zero-valent iron (NZVI) supported on zirconium 1,4-dicarboxybenzene metals-organic frameworks (UIO-66) with strong oxidation resistance was synthesized (NZVI@UIO-66) for V⁵⁺ removal from wastewater. The results demonstrated that NZVI was successfully loaded on UIO-66 with a uniform dispersion, and then the composite was aged in the air which was named A-NZVI@UIO-66. V⁵⁺ could be removed quickly and completely using A-NZVI@UIO-66 in a wider pH range except for the pH = 1 condition. The reaction between A-NZVI@UIO-66 and V⁵⁺ was an endothermic process. Freundlich model with a better-fitted value showed the adsorption of V⁵⁺ on A-NZVI@UIO-66 was multi-layer heterogeneous adsorption and the adsorbed amount of V⁵⁺ was 397.23 mg V/g NZVI. Nitrate had a competitive inhibition on V⁵⁺ removal by A-NZVI@UIO-66. Mechanisms of vanadium elimination from the aqueous phase by A-NZVI@UIO-66 included physical adsorption, reduction, and complex co-precipitation, particularly the reduction dominated. The subsistent Zr-O bond in A-NZVI@UIO-66 provided a possible double reaction path by playing an electron donor, storage, or conductor role. After acid leaching, A-NZVI@UIO-66 represented good reusability in the removal of V⁵⁺ from the practical mine sewage.

Vanadium(V) Removal from Aqueous Solutions and Real Wastewaters onto Anion Exchangers and Lewatit AF5

Adsorption abilities of weakly (Purolite A830), weakly basic/chelating (Purolite S984), and strongly basic (Lewatit MonoPlus SR7, Purolite A400TL, Dowex PSR2, Dowex PSR3) ion exchange resins of different functional groups and microporous Lewatit AF5 without functional groups towards vanadium(V) ions were studied in batch and column systems. In the batch system, the influence of the sorbent mass (0.01–0.1 g), pH (2–10), the phase contact time (1–1440 min),and the initial concentration (5–2000 mg/L) were studied, whereas in the column system, the initial concentrations (50, 100, and 200 mg/L) with the same bed volume and flow rate (0.4 mL/min) were studied. Desorption agents HCl and NaOH of 0.1–1 mol/L concentration were used for loaded sorbent regeneration. The pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models as well as the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models were used to describe kinetic and equilibrium data to acquire improved knowledge on the adsorption mechanism. The desorption efficiency was the largest using 0.5 mol/L NaOH for all sorbents under discussion. Purolite S984, Purolite A830, and Purolite A400TL, especially Purolite S984, are characterized by the best removal ability towards vanadium(V) from both model and real wastewater.

Enhanced elimination of V5+ in wastewater using zero-valent iron activated by ball milling: The overlooked crucial roles of energy input and sodium chloride

The ball-milling technology, a highly efficient and cost-effective method, had excellent application prospects for overcoming passivation issues of normal zero-valent iron (ZVI) to enhance the decontamination efficiency. In this work, we investigated the effects and mechanisms of pH, process control agents (PCA), and main process parameters on the removal of V⁵⁺ using ball-milled zero-valent iron (ZVI^bm). The results showed that ZVI was successfully activated due to mechanochemical action. The enhanced proton conductivity of ZVI^bm leaded to the rapid production of more Fe²⁺, thereby resulting in an order of magnitude higher elimination of V⁵⁺ by ZVI^bm than by ZVI under near-neutral conditions. In addition, the introduction of NaCl in the ball milling process could not only effectively alleviate the agglomeration phenomenon of ZVI^bm, but also effectively enhance its activity. Unexpectedly, due to over-compaction and small size effects, excessive energy input weakened the reactivity of ZVI^bm on V⁵⁺ elimination. Various characterization results confirmed that the removal of V⁵⁺ by ZVI^bm was dominated by reduction and supplemented by adsorption. This work updated the basic understanding of the critical effects of process parameters and NaCl on ZVI^bm in the remediation of vanadium-containing wastewater.

Recent advances of carbon-based nano zero valent iron for heavy metals remediation in soil and water: A critical review

Heavy metal pollution in soil and water has presented a new challenge for the environmental remediation technology. Nano zero valent iron (nZVI) has excellent adsorbent properties for heavy metals, and thus, exhibits great potential in environmental remediation. Used as supporting materials for nZVI, carbon-based materials, such as activated carbon (AC), biochar (BC), carbon nanotubes (CNTs), and graphene (GNs) with aromatic rings formed by carbon atoms as the skeleton, have a large specific surface area and porous structure. This paper provides a comprehensive review on the advancement of carbon-based nano zero valent iron (C-nZVI) particles for heavy metal remediation in soil and water. First, different types of carbon-based materials and their combination with nZVI, as well as the synthesis methods and common characterization techniques of C-nZVI, are reviewed. Second, the mechanisms for the interactions between contaminants and C-nZVI, including adsorption, reduction, and oxidation reactions are detailed. Third, the environmental factors affecting the remediation efficiency, such as pH, coexisting constituents, oxygen, contact time, and temperature, are highlighted. Finally, perspectives on the challenges for utilization of C-nZVI in the actual contaminated soil and water and on the long-term efficacy and safety evaluation of C-nZVI have been proposed for further development.

Preparation of phosphoric acid modified antibiotic mycelial residues biochar: Loading of nano zero-valent iron and promotion on biogas production

Antibiotic mycelial residues (AMRs), as recyclable hazardous waste, can realize efficient utilization by reasonable treatment. To solve the problems of undeveloped pore structure and low specific surface area existed in AMR biochar, this study first modified biochar by phosphoric acid (H₃PO₄) to prepare PBC (H₃PO₄-modified biochar). Then, PBC was used as carrier to load nano zero-valent iron (nZVI) for preparation of nZVI/PBC. Finally, the biochar materials were used to promote anaerobic digestion (AD) of corn straw. The results showed that H₃PO₄-modification can effectively improve the specific surface area, pore structure, and electron donating capacity of AMRs biochar. The using of PBC as carrier to load nZVI attenuated the agglomeration of nZVI particles. Both PBC and nZVI/PBC improved the AD process, with biogas yield enhanced by 29.63% and 29.26%, respectively. The nZVI/PBC exhibited higher ability in maintaining the stability of AD system and promotion of fiber degradation than PBC.

Biosorption of V(V) onto Lantana camara biochar modified by H3PO4: Characteristics, mechanism, and regenerative capacity

Biochar has been widely recognized as an environmentally efficient adsorbent for removing heavy metals. However, considering the weak adsorption performance of the original biochar to the oxygen-containing anion, the adsorption of vanadium by biochar has rarely been investigated. This study proposes that H₃PO₄ activated biochar made from an invasive plant species growing near mines is a novel material to be investigated for V(V) recovery and reuse. As a noxious, invasive plant, Lantana camara L. (LC) has become widely naturalized around the world. Biochar was prepared from LC by pyrolysis at different conditions (200 °C, 350 °C, 500 °C, and 650 °C). The adsorption effect of biochar with and without P pretreatment on V(V) in aqueous solution was compared. The results show that biochar prepared from LC impregnated with H₃PO₄ (MLBC) had the highest adsorption capacity at 500 °C, and the maximal adsorption capacity fitted by Langmuir model was 77.38 mg g^-1, which was considerably higher than that of untreated biochar (LBC, 5.89 mg g^-1). The adsorption procedure was substantially fitted by the Langmuir isotherm and the pseudo-second-order kinetic. Additionally, the interaction of V(V) on MLBC is pH-dependent, and slightly acidic conditions are more favorable for adsorption. The characterization results indicated that electrostatic interaction, complexation reaction, and redox reaction were the primary mechanisms. After three cycles of adsorption, the final maximal adsorption capacity of MLBC remained at 76.03% of that of the virgin sample, demonstrating that MLBC had a recyclable capability to eliminate and restore V(V) from aqueous solutions.

Highly efficient removal of Cr(VI) from aqueous solution by pinecone biochar supported nanoscale zero-valent iron coupling with Shewanella oneidensis MR-1

Nanoscale zero-valent iron (nZVI) has been extensively used to remove various pollutants. However, the rapid deactivation due to aggregation and surface passivation severely limits its practical application. In this study, a novel composite with nZVI supported by pinecone biochar (nZVI-PBC) was successfully synthesized and used for the removal of high concentration Cr(VI) from aqueous solution in the presence of Shewanella oneidensis MR-1 (MR-1). The results showed that the nZVI-PBC coupling with MR-1 (nZVI-PBC/MR-1) exhibited an excellent removal performance for high concentration Cr(VI) compared to the nZVI-PBC alone. Under optimal conditions, 100 mg/L Cr(VI) could be removed completely by nZVI-PBC/MR-1 within 48 h, while only 39.50% of Cr(VI) was removed by nZVI-PBC alone. The improvement of Cr(VI) removal is due to the dissolution of the surface passivation layer of nZVI-PBC, formation of sorbed Fe(II) in the presence of MR-1, and an important role of extracellular polymeric substance (EPS) derived from MR-1. X-ray photoelectron spectroscopy (XPS) and Cr K-edge X-ray absorption near-edge structure spectra (XANES) confirmed that most Cr(VI) was reduced to insoluble Cr(III) and formed Cr₂O₃, Cr_xFe_1-x(OH)₃ and FeCr₂O₄ precipitates, and a small amount of unreduced Cr(VI) was immobilized through adsorption and complexation. The results suggest that nZVI-PBC/MR-1 can effectively overcome the limitations of nZVI and achieve highly efficient removal of high concentration Cr(VI).

Recent advances in removal techniques of vanadium from water: A comprehensive review

In recent years, with the development of economy and industry, water contaminated with heavy metal has become a global environmental problem. Vanadium (V) is an emerging contaminant reported in wastewater along with the increasing mining, smelting and recovering of vanadium ores and application in many fields as a significant national strategy resource. The increasing attention has been paid to the separations of V from water due to its potential toxic to animals and human beings. In the present study, the most common V removal techniques including adsorption, microbiological treatment, chemical precipitation, solvent extraction, electrokinetic remediation, photocatalysis, coagulation and membrane filtration are presented with discussion of their advantages, limitations and the recent achievements. Several major influencing factors and mechanisms of various processes have been briefly analyzed. Some research perspectives are proposed for improving the capacities to remove V from water. The core objective of this review is to provide comprehensive information or database for the superior approach for V removal.

Ultrasonic-assisted synthesis of SiO2 nanoparticles and SiO2/chitosan/Fe nanocomposite and their application for vanadium adsorption from aqueous solution

The husk of brown rice, as a source of silica, was applied to synthesize natural SiO₂ nanoparticles via sonochemical method. SiO₂/CH/Fe nanocomposite was synthesized from SiO₂, chitosan (prepared from shrimp shells via sonochemical method), and iron functional groups and detected using BET, EDX-SEM, and FTIR techniques. These natural-based nanostructures (SiO₂ and SiO₂/CH/Fe) have been applied for vanadium adsorption. The influences of initial pH, initial concentration, and adsorption time were studied via a batch process. The analysis of the kinetics data indicated that the chemical adsorption is predominant. The analysis of the equilibrium data indicated the single layer and exothermic adsorption process. The mono-layer adsorption capacity of SiO₂/CH/Fe was 199.540 mg g^-1. The performance of SiO₂/CH/Fe in a continuous column system was investigated in four adsorption and desorption cycles. Results showed that SiO₂/CH/Fe nanocomposite synthesized with the sonochemical method is a candidate with high adsorption ability for use as an industrial adsorbent.

Microbial removal of vanadium (V) from groundwater by sawdust used as a sole carbon source

Bioremediation of vanadium (V) (V(V)) for polluted groundwater is an emerging topic globally. With this study, microbial removal of V(V) was investigated by sawdust of pine used as a sole carbon source. The removal efficiency of V(V) reached up to 90.3% with anaerobic sludge as inocula and sawdust as the carbon source in nutrient solution. Microbial removal of V(V) could be enhanced by adding medical stone and phosphate rock, from 53.2% up to 82.6% in real groundwater. Microbiological analysis revealed such microbes as Thauera accumulated, which could contribute to V(V) reduction. Such functional species as Bacteroidetes vadinHA17 norank and Anaerolineaceae norank helped degradation of sawdust. In column experiments with domesticated sludge or indigenous microbes from soils, microbial V(V) removal efficiencies (on 26 d) with sawdust were around 58.7% (BS), 54.8% (BP) and 38.4% (BU), respectively. The study can offer a potential approach to microbially removing V(V) for contaminated groundwater and even for disposal of agricultural and forestry wastes.