A ‘three in one’ complexing agent enables copper desorption from polluted soil, its removal from groundwater and its detection

Removal of Copper Ions from Wastewater: A Review

Copper pollution of the world's water resources is becoming increasingly serious and poses a serious threat to human health and aquatic ecosystems. With reported copper concentrations in wastewater ranging from approximately 2.5 mg/L to 10,000 mg/L, a summary of remediation techniques for different contamination scenarios is essential. Therefore, it is important to develop low-cost, feasible, and sustainable wastewater removal technologies. Various methods for the removal of heavy metals from wastewater have been extensively studied in recent years. This paper reviews the current methods used to treat Cu(II)-containing wastewater and evaluates these technologies and their health effects. These technologies include membrane separation, ion exchange, chemical precipitation, electrochemistry, adsorption, and biotechnology. Thus, in this paper, we review the efforts and technological advances made so far in the pursuit of more efficient removal and recovery of Cu(II) from industrial wastewater and compare the advantages and disadvantages of each technology in terms of research prospects, technical bottlenecks, and application scenarios. Meanwhile, this study points out that achieving low health risk effluent through technology coupling is the focus of future research.

Decontamination of water co-polluted by copper, toluene and tetrahydrofuran using lauric acid

Co-contamination by organic solvents (e.g., toluene and tetrahydrofuran) and metal ions (e.g., Cu²⁺) is common in industrial wastewater and in industrial sites. This manuscript describes the separation of THF from water in the absence of copper ions, as well as the treatment of water co-polluted with either THF and copper, or toluene and copper. Tetrahydrofuran (THF) and water are freely miscible in the absence of lauric acid. Lauric acid separates the two solvents, as demonstrated by proton nuclear magnetic resonance (¹H NMR) and Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy (ATR-FTIR). The purity of the water phase separated from 3:7 (v/v) THF:water mixtures using 1 M lauric acid is ≈87%v/v. Synchrotron small angle X-Ray scattering (SAXS) indicates that lauric acid forms reverse micelles in THF, which swell in the presence of water (to host water in their interior) and ultimately lead to two free phases: 1) THF-rich and 2) water-rich. Deprotonated lauric acid (laurate ions) also induces the migration of Cu²⁺ ions in either THF (following separation from water) or in toluene (immiscible in water), enabling their removal from water. Laurate ions and copper ions likely interact through physical interactions (e.g., electrostatic interactions) rather than chemical bonds, as shown by ATR-FTIR. Inductively coupled plasma—optical emission spectrometry (ICP-OES) demonstrates up to 60% removal of Cu²⁺ ions from water co-polluted by CuSO₄ or CuCl₂ and toluene. While lauric acid emulsifies water and toluene in the absence of copper ions, copper salts destabilize emulsions. This is beneficial, to avoid that copper ions are re-entrained in the water phase alongside with toluene, following their migration in the toluene phase. The effect of copper ions on emulsion stability is explained based on the decreased interfacial activity and compressional rigidity of interfacial films, probed using a Langmuir trough. In wastewater treatment, lauric acid (a powder) can be mixed directly in the polluted water. In the context of groundwater remediation, lauric acid can be solubilized in canola oil to enable its injection to treat aquifers co-polluted by organic solvents and Cu²⁺. In this application, injectable filters obtained by injecting cationic hydroxyethylcellulose (HEC +) would impede the flow of toluene and copper ions partitioned in it, protecting downstream receptors. Co-contaminants can be subsequently extracted upstream of the filters (using pumping wells), to enable their simultaneous removal from aquifers.

Use of cover crops in vineyards to prevent groundwater pollution by copper and organic fungicides. Soil column studies

Several fungicides, such as copper and organic products (synthetic or natural), are currently being used in vineyards to control downy mildew (Plasmopara viticola) resulting in soil, surface water, and groundwater pollution. This study aims to assess the effectiveness of using cover crops as an agricultural practice in vineyards to protect soil and groundwater pollution. For that purpose, we performed different soil column studies to quantify soil leaching of selected fungicides (copper, dimethomorph, oxathiapiprolin, zoxamide, acibenzolar-s-methyl, and laminarin) following a rainfall event after a conventional fungicide vineyard application. Two types of vineyard soils (loam and sandy-loam soil textures) and three ground covers (bare ground, monoculture cover, and polyculture cover) were assessed. These studies were completed with hydroponic assays to check the effectiveness of cover roots in the fungicide degradation. Mass balance results show that whereas 3 fungicides (Cu, zoxamide, and dimethomorph) were leached through sandy soil columns, only copper was leached from loam soil columns. The effect of cover crops was only significant for Cu and zoxamide when fungicides were applied 24 h before the rain event, reducing the fungicide leaching by 30%. Hydroponic studies showed that cover roots enhanced the kinetic rates of almost all tested fungicides by 5-467%, suggesting that they are relevant to improving the degradation of fungicides in the soil column. These results are relevant to drawing up recommendations on the use of cover crops to protect soil and groundwater pollution by fungicides.

Adsorption of Cu(ii) from solution by modified magnetic starch St/Fe3O4-g-p(AA-r-HEMA)

Magnetic starch was prepared, and then AA and HEMA were grafted on its surface to obtain St/Fe3O4-g-p(AA-r-HEMA) for the adsorption of Cu(ii).