Optimized Indium modified Ti/PbO2 anode for electrochemical degradation of antibiotic cefalexin in aqueous solutions

Degradation of antibiotics by electrochemical advanced oxidation processes (EAOPs): Performance, mechanisms, and perspectives

Global consumption and discharge of antibiotics have led to the rapid development and spread of bacterial antibiotic resistance. Among treatment strategies, electrochemical advanced oxidation processes (EAOPs) are gaining popularity for treating water/wastewater containing antibiotics due to their high efficiency and easiness of operation. In this review, we summarize various forms of EAOPs that contribute to antibiotic degradation, including common electrochemical oxidation (EO), electrolyte enhanced EO, electro-Fenton (EF) processes, EF-like process, and EAOPs coupling with other processes. Then we assess the performance of various EAOPs in antibiotic degradation and discuss the influence of key factors, including electrode, initial concentration and type of antibiotic, operation conditions, electrolyte, and water quality. We also review mechanisms and degradation pathways of various antibiotics degradation by EAOPs, and address the species and toxicity of intermediates produced during antibiotics treatment. Finally, we highlight challenges and critical research needs to facilitate the application of EAOPs in antibiotic treatment.

PbO2 materials for electrochemical environmental engineering: A review on synthesis and applications

Lead dioxide (PbO₂) materials have been widely employed in various fields such as batteries, electrochemical engineering, and more recently environmental engineering as anode materials, due to their unique physicochemical properties. Key performances of PbO₂ electrodes, such as energy efficiency and space-time yield, are influenced by morphological as well as compositional factors. Micro-nano structure regulation and decoration of metal/non-metal on PbO₂ is an outstanding technique to revamp its electrocatalytic activities and enhance environmental engineering efficiency. The aim of this review is to comprehensively summarize the recent research progress in the morphology control, the structure constructions, and the element doping of PbO₂ materials, further with many environmental application cases evaluated. Concerning electrochemical environmental engineering, the lead dioxide employed in chemical oxygen demand detection, ozone generators, and wastewater treatment has been comprehensively reviewed. In addition, the future research perspectives, challenges and the opportunities on PbO₂ materials for environmental applications are proposed.

Electrocatalytic degradation of methyl orange and 4-nitrophenol on a Ti/TiO2-NTA/La-PbO2 electrode: electrode characterization and operating parameters

The anode material plays a crucial role in the process of electrochemical oxidation. Herein, a TiO₂ nanotube arrays (TiO₂-NTA) intermediate layer and La-PbO₂ catalytic layer were synthesized on a Ti surface by the electrochemical anodic oxidation and electrochemical deposition technology, respectively. The prepared Ti/TiO₂-NTA/La-PbO₂ electrode was used as an electrocatalytic oxidation anode for pollutant degradation. Scanning electron microscopy (SEM) analysis showed that the TiO₂-NTA layer possessed a highly ordered and well-aligned nanotube array morphology, and the La-PbO₂ layer with angular cone cluster was uniform and tightly bonded. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis indicated that the intermediate layer primarily consisted of the anatase crystal structure of TiO₂ and the catalyst layer was made of La-PbO₂. Electrochemical analysis revealed that Ti/TiO₂-NTA/La-PbO₂ electrode exhibited higher oxidation peak current, electrochemical active surface area, and oxygen evolution potential (OEP, 1.64 V). Using methyl orange and 4-nitrophenol as model pollutants, electrocatalytic properties of the prepared Ti/TiO₂-NTA/La-PbO₂ electrode were systematically investigated under different conditions, and the electrochemical degradation fitted well with the pseudo-first-order kinetics model. Efficient anodic oxidation of model pollutants was mainly attributed to the indirect oxidation mediated by hydroxyl radicals (•OH). The total organic carbon (TOC) removal efficiency of methyl orange and 4-nitrophenol was 70.2 and 72.8%, and low energy consumption (2.50 and 1.89 kWh g^-1) was achieved after 240 min of electrolysis under the conditions of initial concentration of model pollutant, electrode spacing, and electrolyte concentration were 50 mg L^-1, 2 cm, and 0.1 mol L^-1, respectively. This work provided a new strategy to develop the high-efficiency electrode for refractory pollutants degradation.

Biodegradation of cefalexin by two bacteria strains from sewage sludge

Bioremediation has been used as an environmentally-friendly, energy-saving and efficient method for removing pollutants. However, there have been very few studies focusing on the specific antibiotic-degrading microorganisms in the activated sludge and their degradation mechanism. Two strains of cefalexin-degrading bacteria (Rhizobium sp. (CLX-2) and Klebsiella sp. (CLX-3)) were isolated from the activated sludge in this study. They were capable of rapidly eliminating over 99% of cefalexin at an initial concentration of 10 mg l^-1 within 12 h. The exponential phase of cefalexin degradation happened a little earlier than that of bacterial growth. The first-order kinetic model could elucidate the biodegradation process of cefalexin. The optimized environmental temperature and pH values for rapid biodegradation by these two strains were found to be 30°C and 6.5-7, respectively. Furthermore, two major biodegradation metabolites of CLX-3, 7-amino-3-cephem-4-carboxylic acid and 2-hydroxy-3-phenyl pyrazine were identified using UHPLC-MS and the biodegradation pathway of cefalexin was proposed. Overall, the results showed that Rhizobium sp. (CLX-2) and Klebsiella sp. (CLX-3) could possibly be useful resources for antibiotic pollution remediation.

Electrocatalytic oxidation of low concentration cefotaxime sodium wastewater using Ti/SnO2-RuO2 electrode: Feasibility analysis and degradation mechanism

In this research, Ti/SnO₂-RuO₂ stable anode was successfully prepared by thermal decomposition method, and low concentration cefotaxime sodium (CFX) was degraded by green and sustainable electrocatalytic oxidation technology. The electrocatalytic activity and stability of the Ti/SnO₂-RuO₂ coating electrode were studied according to the polarization curve of oxygen and chlorine evolution. The effects of current density, initial concentration, pH, electrolyte concentration, and other technological parameters on the degradation efficiency were discussed. Orthogonal experiment results indicated that when the current density was 25 mA cm^-2, concentration of electrolyte was 5 mM and the pH value was 7, the best CFX removal rate of 86.33% could be obtained. The degradation efficiency of electrocatalytic oxidation was discussed through electrochemical analysis. Fourier transform infrared spectroscopy was used to analyze the different inlet and outlet stages before and after the degradation of CFX, and the possible degradation process was discussed. Therefore, the electrocatalytic oxidation of Ti/SnO₂-RuO₂ electrode was a clean and efficient technology, which could be widely used in the treatment of CFX wastewater.