Influence of Saccharomyces cerevisiae yeast cells immobilized on Cocos nucifera fibers for the adsorption of Pb(II) ions

Assessment of Hydrothermal Treatment Effects on Coir Fibers for Incorporation into Polyurethane Matrix Biocomposites Derived from Castor Oil

The incorporation of natural lignocellulosic fibers as reinforcements in polymer composites has witnessed significant growth due to their biodegradability, cost-effectiveness, and mechanical properties. This study aims to evaluate castor-oil-based polyurethane (COPU), incorporating different contents of coconut coir fibers, 5, 10, and 15 wt%. The investigation includes analysis of the physical, mechanical, and microstructural properties of these composites. Additionally, this study evaluates the influence of hydrothermal treatment on the fibers, conducted at 120 °C and 98 kPa for 30 min, on the biocomposites' properties. Both coir fibers (CFs) and hydrothermal-treated coir fibers (HTCFs) were subjected to comprehensive characterization, including lignocellulosic composition analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The biocomposites were subjected to water absorption analysis, bending tests, XRD, SEM, FTIR, and TGA. The results indicate that the 30 min hydrothermal treatment reduces the extractive content, enhancing the interfacial adhesion between the fiber and the matrix, as evidenced by SEM. Notably, the composite containing 5 wt% CF exhibits a reduced water absorption, approaching the level observed in pure COPU. The inclusion of 15 wt% HTCF results in a remarkable improvement in the composite's flexural strength (100%), elastic modulus (98%), and toughness (280%) compared to neat COPU. TGA highlights that incorporating CFs into the COPU matrix enhances the material's thermal stability, allowing it to withstand temperatures of up to 500 °C. These findings underscore the potential of CFs as a ductile, lightweight, and cost-effective reinforcement in COPU matrix biocomposites, particularly for engineering applications.

Adsorption of organic micropollutants on yeast: Batch experiment and modeling

Yeast is ubiquitous and may act as a solid phase in natural aquatic systems, which may affect the distribution of organic micropollutants (OMs). Therefore, it is important to understand the adsorption of OMs on yeast. Therefore, in this study, a predictive model for the adsorption values of OMs on the yeast was developed. For that, an isotherm experiment was performed to estimate the adsorption affinity of OMs on yeast (i.e., Saccharomyces cerevisiae). Afterwards, quantitative structure-activity relationship (QSAR) modeling was performed for the purpose of developing a prediction model and explaining the adsorption mechanism. For the modeling, empirical and in silico linear free energy relationship (LFER) descriptors were applied. The isotherm results showed that yeast adsorbs a wide range of OMs, but the magnitude of K_d strongly depends on the types of OMs. The measured log K_d values of the tested OMs ranged from -1.91 to 1.1. Additionally, it was confirmed that the K_d measured in distilled water is comparable to that measured in real anaerobic or aerobic wastewater (R² = 0.79). In QSAR modeling, the K_d value could be predicted by the LFER concept with an R² of 0.867 by empirical descriptors and an R² of 0.796 by in silico descriptors. The adsorption mechanisms of yeast for OMs were identified in individual correlations between log K_d and each descriptor: Dispersive interaction, hydrophobicity, hydrogen-bond donor, and cationic Coulombic interaction of OMs attract the adsorption, while the hydrogen-bond acceptor and anionic Coulombic interaction of OMs act as repulsive forces. The developed model can be used as an efficient method to estimate OM adsorption to yeast at a low level of concentration.

Insights into the Applications of Natural Fibers to Metal Separation from Aqueous Solutions

There is a wide range of renewable materials with attractive prospects for the development of green technologies for the removal and recovery of metals from aqueous streams. A special category among them are natural fibers of biological origin, which combine remarkable biosorption properties with the adaptability of useful forms for cleanup and recycling purposes. To support the efficient exploitation of these advantages, this article reviews the current state of research on the potential and real applications of natural cellulosic and protein fibers as biosorbents for the sequestration of metals from aqueous solutions. The discussion on the scientific literature reports is made in sections that consider the classification and characterization of natural fibers and the analysis of performances of lignocellulosic biofibers and wool, silk, and human hair waste fibers to the metal uptake from diluted aqueous solutions. Finally, future research directions are recommended. Compared to other reviews, this work debates, systematizes, and correlates the available data on the metal biosorption on plant and protein biofibers, under non-competitive and competitive conditions, from synthetic, simulated, and real solutions, providing a deep insight into the biosorbents based on both types of eco-friendly fibers.

Biosorption of Hexavalent Chromium by Bacillus megaterium and Rhodotorula sp. Inactivated Biomass

Due to the adverse effects of hexavalent chromium (Cr6+) on human health and the quality of the environment, the scientific community has invested a lot of effort to solve this pollution problem. Thus, implementing sustainable alternatives for Cr6+ elimination by exploiting the capacity of microbial biomass to retain heavy metals by biosorption is considered an economic and eco-friendly solution, compared to the conventional physico-chemical processes. However, the ability of microorganisms to remove Cr6+ from liquid effluents can strongly be affected by biotic and abiotic factors. With these issues in mind, the main purpose of this paper was to investigate Cr6+ biosorption on Bacillus megaterium and Rhodotorula sp. biomass inactivated by thermal treatments, exploring the effects of some factors such as: pH, biosorbent dose, initial concentration of the metal in solution, temperature and contact time between the biosorbent and the metal ions on process effectiveness. The results showed that Cr6+ removal by biosorption on the selected microorganisms was strongly influenced by the pH of the solution which contains chromium, the reduction being the principal mechanism involved in hexavalent chromium biosorption. Equilibrium and kinetic studies were also performed, together with SEM-EDX and FTIR spectra, to explain the mechanisms of the biosorption process on the selected biomasses. Maximum uptake capacities of 34.80 mg/g biosorbent and 47.70 mg/g biosorbent were achieved by Bacillus megaterium and Rhodotorula sp., respectively, at pH 1, biosorbent dosage of 8 g/L, 25 °C, after a contact time of 48 h and an initial Cr6+ concentration in solution of 402.52 mg/L. The experimental results showed that Cr6+ biosorption by selected microorganisms followed the Elovich model, the values of the correlation coefficients being 0.9868 and 0.9887, respectively. The Freundlich isotherm model best describes the Cr6+ biosorption by Bacillus megaterium and Rhodotorula sp., indicating that a multilayer biosorption mainly controls the process and is conducted on heterogeneous surfaces with uniformly distributed energy.

Control Efficiency of Biochar Loaded with Bacillus subtilis Tpb55 against Tobacco Black Shank

Black shank caused by Phytophthora nicotianae has become a destructive soil-borne disease to different flue-cured tobacco cultivars in Southwest China. The use of biochar amendments for microorganism synergy is a promising effective strategy for P. nicotianae development control. In this study, biochar samples were prepared from tamarisk with different pyrolization temperatures (300–500 °C). The effect of pyrolytic temperatures on the bacteria immobilization efficiency of biochar was investigated. B. subtilis Tpb55 was successfully loaded on different biochars as biocontrol composites. The survival investigation of the inoculum suggested that biochar pyrolized at 300 °C (BC300), with a large pore opening diameter; a greater pore volume exhibited a better Tpb55 immobilization. A pot experiment indicated that Tpb55-loaded BC300 had a more pronounced decrease in the disease severity index of black shank disease and an increase in the soil pH, alkali-hydrolyzable nitrogen, soil-available phosphorus, and available potassium. BC300 inoculated with Tpb55 showed the highest control effect (79.60%) against tobacco black shank in the pot experiments, with the lowest copy number of P. nicotianae DNA. In conclusion, biochar-immobilized Tpb55 may provide a new strategy for preventing and controlling tobacco black shank.

Appreciatively Efficient Sorption Achievement to U(VI) from the El Sela Area by ZrO2/Chitosan

The need to get uranium out of leaching liquid is pushing scientists to come up with new sorbents. This study uses the wet technique to improve the U(VI) sorption properties of ZrO2/chitosan composite sorbent. To validate the synthesis of ZrO2/CS composite with Zirconyl-OH, -NH, and -NH2 for U(VI) binding, XRD, FTIR, SEM, EDX, and BET are used to describe the ZrO2/chitosan wholly formed. To get El Sela leaching liquid, it used 150 g/L H2SO4, 1:4 S:L ratio, 200 rpm agitation speed, four hours of leaching period, and particle size 149–100 µm. In a batch study, the sorption parameters are evaluated at pH 3.5, 50 min of sorbing time, 50 mL of leaching liquid (200 mg/L U(VI)), and 25 °C. The sorption capability is 175 mg/g. Reusing ZrO2/CS for seven cycles with a slight drop in performance is highly efficient, with U(VI) desorption using 0.8 M acid and 75 min of desorption time. The selective U(VI) recovery from El Sela leachate was made possible using ZrO2/CS. Sodium diuranate was precipitated and yielded a yellow cake with a purity level of 94.88%.

Ecofriendly Composite as a Promising Material for Highly-Performance Uranium Recovery from Different Solutions

The development of new materials based on biopolymers (as renewable resources) is substantial for environmental challenges in the heavy metal and radionuclide ions removal contaminations. Functionalization of chitosan with sulfonic groups was achieved for improving the uranium sorption, not only from slightly acidic leachate, but also for the underground water. The prepared hydrogel based on chitosan was characterized by series of analysis tools for structure elucidation as FTIR spectroscopy, textural properties using nitrogen adsorption method, pH_PZC (by pH-drift method), thermogravimetric analysis (TGA), SEM, and SEM-EDX analyses. The sorption was performed toward uranium (VI) ions for adjustment of sorption performances. The optimum sorption was performed at pH 4 (prior to the precipitation pH). The total sorption was achieved within 25 min (relatively fast kinetics) and was fitted by pseudo-first order rate equation (PFORE) and resistance to intraparticle diffusion equation (RIDE). The maximum sorption capacity was around 1.5 mmol U g^-1. The sorption isotherms were fitted by Langmuir and Sips equations. Desorption was achieved using 0.3 M HCl solution and the complete desorption was performed in around 15 min of contact. The sorption desorption cycles are relatively stable during 5 cycles with limit decreasing in sorption and desorption properties (around 3 ± 0.2% and 99.8 ± 0.1%, respectively). The sorbent was used for removal of U from acid leachate solution in mining area. The sorbent showed a highly performance for U(VI) removal, which was considered as a tool material for radionuclides removing from aquatic medium.

Study of the Adsorption of Bacillus subtilis and Bacillus cereus Bacteria on Enterosorbent Obtained from Apricot Kernels

This paper presents the results of scientific research on the structural parameters and the adsorption capacity of activated carbon obtained from apricot kernels (AC-A) in a fluidized layer. The obtained results highlight the fact that the described procedure allows obtaining a mesoporous carbon adsorbent with increased adsorption capacities (SBET = 1424 m2/g) and with quality indices corresponding to the requirements of the carbon enterosorbents imposed by the European Pharmacopoeia Monograph. Adsorption kinetics studies of the bacteria Bacillus subtilis and Bacillus cereus have shown that the time to establish the adsorption equilibrium is 75–90 min. The adsorption of the mentioned bacteria on the carbon enterosorbent AC-A was studied depending on the temperature (26 and 36 °C) and pH of the solution (1.97–4.05). Scanning Electron Microscopy (SEM) showed that the immobilization of bacteria takes place on the outer surface of the carbon adsorbent due to the fact that the geometric dimensions of the bacteria are often larger than the macro diameter of the activated carbon pores. FTIR investigations also indicated the presence of bacteria on the surface of the activated carbon.

Empirical Modeling and Optimization by Active Central Composite Rotatable Design: Brilliant Red HE-3B Dye Biosorption onto Residual Yeast Biomass-Based Biosorbents

(1) Introduction: Natural polymers can be successfully used as a matrix to immobilize residual yeast-based biomass in a form that is easy to handle and can be used as biosorbent capable of removing persistent polluting species from different aqueous systems such as reactive azo dyes. (2) Experimental: Two types of new biosorbents were prepared based on residual Saccharomyces pastorianus yeast biomass immobilized in sodium alginate (using two different practice techniques) and studied in the biosorption process of reactive Brilliant Red HE-3B dye using certain experimental planning matrices according to the active central composite rotatable design of 23 order. The experimental data obtained under certain selected working conditions were processed considering the influence of three independent variables (biosorbent concentration—X1, initial dye concentration—X2 and biosorption time—X3) onto the dependent variable (Y = f(X1,X2,X3)) expressing the performance of reactive dye biosorption onto the new prepared biosorbents (i.e., dye removal degree, %). (3) Results: Two mathematical models were proposed for each prepared biosorbent. The maximum dye removal was 52.878% (Y1) when 18 g/L biosorbent 1 (micro-encapsulated form) was applied in 70 mg/L dye-containing solution for at least 8 h, and 75.338% (Y2) for 22.109 g/L biosorbent 2 (immobilized form) in 48.49 mg/L dye-containing solution for at least 8.799 h. (4) Discussion: The optimal values achieved for the two tested biosorbents were compared, and we investigated the possibility of using this residual biomass as a biosorbent for the reactive dye removal, supported by the experimental results with the recommended variation domains of each influencing variable. The results are sufficient to permit performing dye removal higher than 50% (biosorbent 1) or 70% (biosorbent 2), working with more than 18–22 g/L biosorbent after at least 8 h (as an exchange at work). (5) Conclusions: The proposed models are in good agreement with the experimental data and permit the prediction of dye biosorption behavior onto the experimental variation domain of each independent variable.

Risk of low stability Saccharomyces cerevisiae ATCC 9763-heavy metals complex in gastrointestinal simulated conditions

The biosorption of heavy metals by microorganisms has attracted the interest of food researchers as the last approach to reduce the risk of their absorption in the human body. But the stability of yeast-metal complexes under simulated gastrointestinal conditions has not been investigated. In this study stability of complex as well as isotherm and kinetic models of biosorption have been studied. Also, the impact of some pretreatment on yeast biosorption was studied to check the possible impact of different environmental conditions in food processing. Data showed a risk of heavy metal release in simulated gastrointestinal conditions. The best biosorption of metals from aqueous solutions by Saccharomyces (S.) cerevisiae may be achieved after NaOH pretreatment for Mercury (Hg) 92.7%. While biosorption of Lead (Pb) 37.48%, Arsenic (As) 19.44%, and Cadmium (Cd) 39.9% by untreated yeast were better. In gastrointestinal conditions, Hg and Cd-yeast complexes were more stable and biosorption of Cd and Pb increased. Bonds of As and Hg-yeast complexes in digestion conditions were reversible. The metals biosorption by untreated yeast followed the pseudo-second-order kinetic and the Langmuir isotherm model for Hg, Pb, and Cd and Freundlich for As. Results showed that biosorption of heavy metals by S. cerevisiae, although may decrease metal bioavailability in fermented foods, the complex is not enough stable in gastrointestinal conditions.

•

Biodecontamination of heavy metals from multi-metallic aqueous solutions using Saccharomyces cerevisiae.

•

Stability assessment of metal-yeast complex after simulated gastrointestinal condition.

•

Usingpretreatment strategies to increase bioremoval efficiency and stability.

•

Indicating reversible bonds of heavy metal-yeast complexes.

•

The Langmuir isotherm model was the best-predicting biosorption model.

Novel Application of Tagua Shell (Phytelephas aequatorialis) as Adsorbent Material for the Removal of Pb(II) Ions: Kinetics, Equilibrium, and Thermodynamics of the Process

Tagua shell is a material generated in the handcrafted jewelry industry, which is discarded since it does not have a specific use. The present study evaluates this material as an adsorbent for the removal of lead (II) in aqueous media. The adsorbent was characterized through the point of zero charge technique, X-ray microanalysis, scanning electron microscopy, and Fourier-transform infrared spectroscopy. Tests were carried out in a static system using a lead (II) solution of 100 mg·L−1 to establish the process conditions, setting a pH of 5, an adsorbent dose of 1.8 g/100 mL, and a contact time of 60 min. The kinetic study performed showed that the experimental data had a better fit with the pseudo-second order model. The experimental equilibrium data were correlated using the Langmuir, Freundlich, Toth, Redlich–Peterson, and Sips models, of which the Langmuir and Sips models proved to be the best to represent the adsorption process due to the high coefficient of determination they presented at the different temperatures, being between 0.9629–0.9899 and 0.9819–0.9900, respectively. The maximum amount of lead adsorbed was 22.0348 mg·g−1 at a temperature of 298 K. Finally, the thermodynamics study indicated that the process is endothermic, spontaneous, and thermodynamically stable.

Characterization of Waste Amidoxime Chelating Resin and Its Reutilization Performance in Adsorption of Pb(II), Cu(II), Cd(II) and Zn(II) Ions

The continuous expansion of the market demand and scale of commercial amidoxime chelating resins has caused large amounts of resin to be discarded around the world. In this study, the waste amidoxime chelating resin was reutilized as an adsorbent for the removal and recovery of Pb(II), Cu(II), Cd(II) and Zn(II) ions from aqueous solutions. The physical morphology and chemical composition of the waste amidoxime chelating resin (WAC-resin) from the factory was characterized by the elemental analyzer, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. The influence of the initial metal ions concentration, contact time, temperature and the solution pH on the adsorption performance of the metal ions was explored by batch experiments. It was shown that the optimal pH was 4. Kinetic studies revealed that adsorption process corresponded with the pseudo-second-order kinetic model and the adsorption isotherm was consistent with the Langmuir model. At room temperature, the adsorption capacities of WAC-resin for Pb2+, Cu2+, Zn2+ and Cd2+ reached 114.6, 93.4, 24.4 and 20.7 mg/g, respectively.

Raphia-Microorganism Composite Biosorbent for Lead Ion Removal from Aqueous Solutions

This study investigated the possibility of obtaining a raphia-microorganism composite for removing lead ions from aqueous solutions using immobilized yeast cells Saccharomyces cerevisiae on Raphia farinifera fibers. The obtained biocomposite was characterized using scanning electron microscopy and Fourier transform infrared spectroscopy. Studies were conducted to determine the influence of contact time, initial concentration of Pb(II), and pH allowed for the selection of nonlinear equilibrium and kinetic models. The results showed that the biocomposite had a better Pb(II) removal capacity in comparison to the raphia fibers alone, and its maximum Pb(II) adsorption capacity was 94.8 mg/g. The model that best describes Pb(II) sorption was the Temkin isotherm model, while kinetic studies confirmed the chemical nature of the sorption process following the Elovich model. The obtained research results provide new information on the full use of the adsorption function of biomass and the ubiquitous microbial resources and their use in the remediation of aqueous environments contaminated with heavy metals.