Solar-driven photothermal-Fenton removal of ofloxacin through waste natural pyrite with dual-function

Activated carbon-mediated arsenopyrite oxidation and arsenic immobilization: ROS formation and its role

The oxidative dissolution of arsenopyrite (FeAsS) is a significant source of arsenic contamination in nature. Activated biochar (AC), a widely used environmental remediation agent, is prevalent in ecosystems and participated in various geochemical processes of arsenic and iron-containing sulfide minerals. However, the impact of AC-arsenopyrite association on reactive oxidation species (ROS) generation and its contribution to As transformation were rarely explored. Here, ROS formation and the redox conversion of As during the interaction between AC and arsenopyrite were investigated. AC-mediated arsenopyrite oxidation was a two-stage process. At stage I, the heterogeneous electron transfer from arsenopyrite facilitated O2 reduction on AC, enhancing arsenopyrite dissolution and ROS formation. TBA, PBQ and catalase inhibited 86.40 %, 79.39 % and 49.66 % of As(III) oxidation, respectively, indicating indicated that HO˙, (O2•)- and H2O2 were responsible for As(III) oxidation. However, at stage II, the mobility of As was highly restricted, especially increasing AC addition. Besides adsorption, AC retained appreciable As through catalyzing insoluble ferric arsenate formation and growth by promoting Fe(II) and As(III) oxidation and functioning as nuclei. These findings deepen our understanding of the coupling behavior of AC-arsenopyrite and its influence on geochemical cycling of arsenic in mined surroundings, which has important implications for mitigating arsenic pollution.

Production of pyrite-based catalysts supported on graphene oxide and zinc oxide to treat drug mixture via advanced oxidation processes

Advanced oxidation processes (AOP) stood out as an efficient alternative for the treatment of organic contaminants. In this work, there were proposed syntheses of mixed catalysts of pyrite and graphene oxide and pyrite and zinc oxide to treat a mixture of the drugs atenolol and propranolol in aqueous solution through the photo-Fenton process with ultraviolet radiation. The efficiency of the methodologies used in the syntheses was confirmed through different characterization analyses. It was verified that the pyrite and zinc oxide catalyst led to the best contaminant degradation percentages with values equal to 88 and 84% for the groups monitored at the wavelengths (λ) of 217 and 281 nm. The degradation kinetics presented a good fit to the kinetic model proposed by Chan and Chu (2003) with R2 equal to 0.99, indicating a pseudo-first-order degradation profile. Finally, toxicity tests were carried out with two types of seeds, watercress and cabbage, for the solution before and after treatment. The cabbage seeds showed a reduction in germination percentages for the samples after treatments, while no toxicity was observed for watercress ones. This highlights the importance of evaluating the implications caused by products in relation to different organisms representing the biota.

Sphere-shaped ZnO photocatalyst synthesis for enhanced degradation of the Quinolone antibiotic, Ofloxacin, under UV irradiation

The sphere-shaped zinc oxide (ZnO) photocatalyst was synthesized by the homogeneous precipitation method, using Zn(CH3COO)2·2H2O as a zinc precursor and NH4OH as a precipitating agent. The morphology and crystal structure of the prepared ZnO sample were studied by XRD, SEM, FT-IR, XPS, zeta potential measurements, and a low-temperature nitrogen adsorption-desorption technique. The optical characteristics of ZnO were determined by UV - Vis diffuse reflectance spectroscopy. ZnO photocatalyst performance of up to 100% within 210 min was observed in the photodegradation of the ofloxacin antibiotic under ultraviolet (UV) irradiation. The effect of antibiotic concentration, heavy metal ions, and water sources on the photocatalytic activity of ZnO demonstrated both the potential of its application under different conditions, and a good adaptability of this photocatalyst. The photodegradation reaction correlated well with the first-order kinetics model, with a rate constant of 0.0173 min-1. The reusability of the photocatalyst was verified after three cycles of use. Admittedly, photogenerated electrons and holes played a key role in removal of the antibiotic. This work showed the suitability of prepared ZnO for antibiotic removal, and its potential use for environmental protection.

Enhanced photo-Fenton degradation of contaminants in a wide pH range via synergistic interaction between 1T and 2H MoS2 and copolymer tea polyphenols/polypyrrole

In this study, we present the successful development of a unique photo-Fenton catalyst, 1T-2H MoS2@TP/PPy (MTP), achieved through the coating of a copolymer of tea polyphenol (TP) and polypyrrole (PPy) onto the surface of heterophase molybdenum disulfide (1T-2H MoS2). This innovative approach involves the integration of hydrothermal synthesis with copolymerization techniques. Our strategy utilizes nanoflower-like 1T-2H MoS2 as the foundational framework, which is then enveloped in TP and PPy copolymer. This innovative approach involves the integration of hydrothermal synthesis with copolymerization techniques. Our strategy utilizes nanoflower-like 1T-2H MoS2 as the foundational framework, which is then enveloped in TP and PPy copolymer. This distinctive architecture demonstrates exceptional catalytic performance owing to the hetero-phase entanglement of 1T-2H MoS2, which provides a diverse array of active sites. The coupled structure of TP and iron (TP-Fe2+/Fe3+) effectively overcome the limitation associated with the iron source. The incorporation of PPy not only reduces the recombination of photogenerated electron-hole pairs but also enhances the stability of 1T-2H MoS2. Remarkably, our experiments on the degradation of methylene blue (MB) and tetracycline (TC) degradation demonstrate that TP-Fe2+/Fe3+ significantly expands the pH applicability range of the MTP composite catalyst. Additionally, we examine several factors, including different catalysts, H2O2 addition, variations in light intensity, solution pH, temperature fluctuations, and the role of active species, to comprehensively understand their impact on the photo-Fenton degradation process. In conclusion, MTP composite exhibits robust catalytic stability and demonstrates a broad pH utilization range in the photo-Fenton oxidation process, highlighting its promising potential for a wide range of applications.

A highly efficient process to enhance the bioleaching of spent lithium-ion batteries by bifunctional pyrite combined with elemental sulfur

Bioleaching technologies have been shown to be an environmentally friendly and economically beneficial tool for extracting metals from spent lithium-ion batteries (LIBs). However, conventional bioleaching methods have exhibited low efficiency in recovering metals from spent LIBs. Therefore, relied on the sustainability principle of using waste to treat waste, this study employed pyrite (FeS2) as an energy substance with reducing properties and investigated its effects in combination with elemental sulfur (S0) or FeSO4 on metals bioleaching from spent LIBs. Results demonstrated that the bioleaching efficiency was significantly higher in the leaching system constructed with FeS2 + S0, than in the FeS2 + FeSO4 or FeS2 system. When the pulp densities of FeS2, S0 and spent LIBs were 10 g L-1, 5 g L-1 and 10 g L-1, respectively, the leaching efficiency of Li, Ni, Co and Mn all reached 100%. Mechanistic analysis reveals that in the FeS2 + S0 system, the activity and acid-producing capabilities of iron-sulfur oxidizing bacteria were enhanced, promoting the generation of Fe (Ⅱ) and reducible sulfur compounds. Simultaneously, bio-acids were shown to disrupt the structure of the LIBs, thereby increasing the contact area between Fe (Ⅱ) and sulfur compounds containing high-valence metals. This effectively promoted the reduction of high-valence metals, thereby enhancing their leaching efficiency. Overall, the FeS2 + S0 bioleaching process constructed in this study, improved the leaching efficiency of LIBs while also effectively utilizing waste, providing technical support for the comprehensive and sustainable management of solid waste.

Harnessing the power of natural minerals: A comprehensive review of their application as heterogeneous catalysts in advanced oxidation processes for organic pollutant degradation

The release of untreated wastewater into water bodies has become a significant environmental concern, resulting in the accumulation of refractory organic pollutants that pose risks to human health and ecosystems. Wastewater treatment methods, including biological, physical, and chemical techniques, have limitations in achieving complete removal of the refractory pollutants. Chemical methods, particularly advanced oxidation processes (AOPs), have gained special attention for their strong oxidation capacity and minimal secondary pollution. Among the various catalysts used in AOPs, natural minerals offer distinct advantages, such as low cost, abundant resources, and environmental friendliness. Currently, the utilization of natural minerals as catalysts in AOPs lacks thorough investigation and review. This work addresses the need for a comprehensive review of natural minerals as catalysts in AOPs. The structural characteristics and catalytic performance of different natural minerals are discussed, emphasizing their specific roles in AOPs. Furthermore, the review analyzes the influence of process factors, including catalyst dosage, oxidant addition, pH value, and temperature, on the catalytic performance of natural minerals. Strategies for enhancing the catalytic efficiency of AOPs mediated by natural minerals are explored, mainly including physical fields, reductant addition, and cocatalyst utilization. The review also examines the practical application prospects and main challenges associated with the use of natural minerals as heterogeneous catalysts in AOPs. This work contributes to the development of sustainable and efficient approaches for organic pollutant degradation in wastewater.

Original nanostructured bacterial cellulose/pyrite composite: Photocatalytic application in advanced oxidation processes

The development of an original catalytic composite of bacterial cellulose (BC) and pyrite (FeS₂) for environmental application was the objective of this study. Nanoparticles of the FeS₂ were synthesized from the hydrothermal method and immobilized on the BC structure using ex situ methodology. In the BC, the FTIR and XRD analyzes showed the absorption band associated with the Fe-S bond and crystalline peaks attributed to the pyrite. Thus, the immobilization of the iron particles on the biopolymer was proven, producing the composite BC/FeS₂. The use of the SEM technique also ratifies the composite production by identifying the fibrillar structure morphology of the cellulose covered by FeS₂ particles. The total iron concentration was 54.76 ± 1.69 mg L^-1, determined by flame atomic absorption analysis. TG analysis and degradation tests showed respectively the thermal stability of the new material and its high catalytic potential. A multi-component solution of textile dyes was used as the matrix to be treated via advanced oxidative processes. The composite acted as the catalyst for the Fenton and photo-Fenton processes, with degradations of 52.87 and 96.82%, respectively. The material proved stability by showing low iron leaching (2.02 ± 0.09 and 2.11 ± 0.11 mg L^-1 for the respective processes). Thus, its high potential for reuse is presumed, given the remaining concentration of this metal in the BC. The results showed that the BC/FeS₂ composite is suitable to solve the problems associated with using catalysts in suspension form.

Multi-catalysis of glow discharge plasma coupled with FeS2 for synergistic removal of antibiotic

Fe-based composites improved the energy utilization efficiency of plasma for removing contaminants through multi-catalysis have received much attention. However, the energy efficiency and catalytic activity are compromised by the slow transformation from Fe (Ⅲ) to Fe (Ⅱ). Here, given the electron-donating ability of reducing sulfur species, as well as the acidic environment generated by FeS₂, single FeS₂ was introduced into the glow discharge plasma (GDP) reactor for the removal of tylosin (TYL). The results showed that a significant synergistic effect between FeS₂ and GDP improved the energy efficiency of plasma and the removal efficiency of TYL (99.7%). FeS₂ boosted the generation of radicals (·OH, ·O₂^-) and nonradicals (h⁺, e^-) rather than H₂O₂ and O₃, which played an important role in TYL abatement. Moreover, the electrons donating sulfur and iron species from FeS₂ can accelerate the conversion of Fe(III) to Fe(II), which was conducive to the generation of radicals. Besides, acid solution self-adjustment resulted from the oxidation of FeS₂ improved heterogeneous Fenton reaction, the oxidation potential of ·OH and adsorption of positive charged TYL. The plausible degradation pathways of TYL were proposed in GDP/FeS₂ system. In summary, enhanced removal of TYL was mainly attributed to the catalytic pathway altered by FeS₂ through high-energy electrons, photocatalysis, heterogeneous Fenton and O₃ catalysis in the GDP system simultaneously. The strategy of integrating GDP with FeS₂ proposed in this work is expected to offer a feasible and potential technique for organic wastewater treatment.