NiCo2O4 nanoparticles anchored on reduced graphene oxide with enhanced catalytic activity towards the reduction of p-Nitrophenol in water

Electron transfer enhanced catalytic activity of nitrogen doped reduced graphene oxide supported CuCo2O4 towards the fast reduction of 4-nitrophenol in water

There has been a growing interest in the design and development of graphene based composite materials with superior performances for environmental catalytic applications. But in most of the studies the synthesis conditions require elevated temperatures and expensive working setups (high temperature furnaces, autoclaves, inert atmosphere conditions etc.). In this reported work, the nitrogen doped reduced graphene oxide supported CuCo2O4 (NG/CuCo2O4) composites were prepared through a simple one pot synthesis method under mild conditions (∼95 °C and air atmosphere) and successfully employed as catalysts for the reduction of toxic 4-nitrophenol (4NP). The characterization results revealed the successful formation of NG/CuCo2O4 composites with a possible charge transfer interaction between nitrogen doped reduced graphene oxide support of CuCo2O4. The NG/CuCo2O4 hybrids exhibited robust catalytic activity in 4NP reduction with an activity factor of 261.5 min-1 g-1. A 4NP conversion percentage which is as high as 99.5% was achieved within 11 min using the NG/CuCo2O4 catalyst. The detailed kinetic analysis confirmed the Langmuir-Hinshelwood model for the NG/CuCo2O4 catalysed 4NP reduction. The nitrogen doped reduced graphene oxide support modified the electronic levels of CuCo2O4 nanoparticles through electron transfer interactions and enhanced the catalytic activity of CuCo2O4 in NG/CuCo2O4 through improved adsorption of reactant ions and effective generation of active hydrogen species. The good reusability and stability along with profound activity of NG/CuCo2O4 catalyst makes it a promising material for wide scale catalytic applications.

Deciphering the mechanistic insights of 4-nitrophenol reduction catalyzed by a 1D-2D Bi2S3 nanostructured catalyst

Exploring the reaction mechanism and the role of a catalyst in the conversion of pollutants to value-added products is vital for sustainable development. Herein, a polyvinylpyrrolidone-assisted liquid-phase reflux strategy was utilized to synthesize anisotropic 1D-2D Bi2S3 nanostructures. The as-synthesized nanostructures were used as catalysts in batch experiments for 4-nitrophenol (4-NP) reduction and they exhibited an apparent rate constant (kapp), turnover frequency (TOF), and activation energy (Ea) of 0.441 min-1, 1.543 h-1 and 26.13 kJ mol-1, respectively. Also, the effects of catalyst dosage, NaBH4 amount, 4-NP concentration, solvents, pH, and common ions were evaluated. Isotope labeling and kinetic isotope effects (KIEs) confirm that water is the proton source in 4-NP reduction. Electrochemical studies revealed that the nanostructured 1D-2D Bi2S3 enables the dissociation of BH4- into active absorbed and adsorbed hydrogen () species and assists in the catalytic reduction of 4-NP. This study offers a new insight into designing an efficient nanostructured 1D-2D Bi2S3 catalyst for 4-nitrophenol reduction.

Active metals decorated NiCo2O4 yolk-shell nanospheres as nanoreactors for catalytic reduction of nitroarenes and azo dyes

Transition-metal oxides (TMOs) have received a great deal of research attention and have been widely used in a variety of fields. However, conventional TMOs do not possess high specific surface area, sufficient active site on their surfaces, and limited their applications in catalysis. This study presents a two-step method for synthesizing active metal (M) decorated NiCo2O4 (M/NiCo2O4, M = Pd or Cu) nanospheres with yolk-shell nanostructures. Taking advantage of the unique morphology and the combination of dual active components (i.e., active NiCo2O4 substrate and decorated active metal), the as-prepared M/NiCo2O4 yolk-shell nanospheres can be employed as nanoreactors in the organic reactions. In catalyzing the reduction of a representative nitroarene (i.e., 4-NP) by NaBH4, the Pd/NiCo2O4 nanoreactors exhibit a superior catalytic efficiency to their counterparts (Cu/NiCo2O4 and NiCo2O4). The turnover frequency is much higher than that of various TMOs supported nanocatalysts have been reported over the past five years. Furthermore, the Pd/NiCo2O4 nanoreactors show excellent stability and common applicability of the reduction of various substituted nitrobenzenes and azo dyes. This work provides new rational design concept and preparation strategy for efficient nanoreactors with dual active components and sheds light on the practical application of chemical reactions.

CuO/TiO2/ZnO NPs Anchored Hydrogen Exfoliated Graphene: To Comprehend the Role of Graphene in Catalytic Reduction of p-Nitrophenol

The present study deals with sonochemically in situ synthesis of a novel functional catalyst using hydrogen exfoliated graphene (HEG) supported titanium dioxide (TiO2) and copper sulfate (CuSO4) doped with zinc oxide (ZnO) (abbreviated as Ti/Cu/Zn-HEG). The synthesis of the Ti/Cu/Zn-HEG nanocomposite (NCs) catalyst was confirmed through its characterizations by XRD, SEM-EDX, TEM, XPS, FTIR, and BET methods. It was assessed for catalytic conversion of a model aromatic compound para-nitrophenol (p-NP) in an aqueous solution. The p-NP is a nitroaromatic compound that has a toxic and mutagenic effect. Its removal from the water system is necessary to protect the environment and living being. The newly synthesized Ti/Cu/Zn-HEG NCs were applied for their higher stability and catalytic activity as a potential candidate for reducing p-NP in practice. The operating parameters, such as p-NP concentration, catalyst dosage, and operating time were optimized for 150 ppm, 400 ppm, and 10 min through response surface methodology (RSM) in Design-Expert software to obtain the maximum reduction p-NP up to 98.4% at its normal pH of 7.1 against the controls (using HEG, Ti/Cu-HEG, and Zn-HEG). Analysis of variance of the response suggested the regression equation to be significant for the process with a major impact on catalyst concentration and operating time. The model prediction data (from RSM) and experimental data were corroborated well as reflected through model's low relative error (RE < 0.10), high regression coefficient (R2 > 0.97), and Willmott d-index (dwill-index > 0.95) values.

Y-mediated optimization of 3DG-PbO2 anode for electrochemical degradation of PFOS

In our previous study, the three-dimensional graphene-modified PbO2 (3DG-PbO2) anode was prepared for the effective degradation of perfluorooctanesulfonat (PFOS) by the electrochemical oxidation process. However, the mineralization efficiency of PFOS at the 3DG-PbO2 anode still needs to be further improved due to the recalcitrance of PFOS. Thus, in this study, the yttrium (Y) was doped into the 3DG-PbO2 film to further improve the electrochemical activity of the PbO2 anode. To optimize the doping amount of Y, three Y and 3DG codoped PbO2 anodes were fabricated with different Y3+ concentrations of 5, 15, and 30 mM in the electroplating solution, which were named Y/3DG-PbO2-5, Y/3DG-PbO2-15 and Y/3DG-PbO2-30, respectively. The results of morphological, structural, and electrochemical characterization revealed that doping Y into the 3DG-PbO2 anode further refined the β-PbO2 crystals, increased the oxygen evolution overpotential and active sites, and reduced the electron transfer resistance, resulting in a superior electrocatalytic activity. Among all the prepared anodes, the Y/3DG-PbO2-15 anode exhibited the best activity for electrochemical oxidation of PFOS. After 120 min of electrolysis, the TOC removal efficiency was 80.89% with Y/3DG-PbO2-15 anode, greatly higher than 69.13% with 3DG-PbO2 anode. In addition, the effect of operating parameters on PFOS removal was analyzed by response surface, and the obtained optimum values of current density, initial PFOS concentration, pH, and Na2SO4 concentration were 50 mA/cm2, 12.21 mg/L, 5.39, and 0.01 M, respectively. Under the optimal conditions, the PFOS removal efficiency reached up to 97.16% after 40 min of electrolysis. The results of the present study confirmed that the Y/3DG-PbO2 was a promising anode for electrocatalytic oxidation of persistent organic pollutants.

Facile Synthesis of CoOOH Nanorings over Reduced Graphene Oxide and Their Application in the Reduction of p-Nitrophenol

A facile and one-step route has been employed for the synthesis of highly uniform CoOOH nanorings assembled on the surface of reduced graphene oxide (CoOOH/rGO nanocomposite). The physicochemical properties of the obtained CoOOH/rGO nanocomposite were characterized using X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ physical adsorption (BET) and X-ray photoelectron spectroscopy (XPS). The TEM and SEM results confirmed that CoOOH nanorings (edge length ∼ 95 nm) were uniformly decorated on reduced graphene oxide nanosheets using the simple precipitation-oxidation-reduction method. When used as a catalyst for the reduction of p-nitrophenol to p-aminophenol in the presence of excess NaBH₄, the resulting CoOOH/rGO nanocomposite exhibited good activity and stability. When the initial concentration of p-nitrophenol was 1.25 × 10^-4 mol·L^-1, p-nitrophenol could be fully reduced within 3.25 min at room temperature. The apparent rate constant was estimated to be 1.77 min^-1, which is higher than that of pure CoOOH nanorings. Moreover, p-nitrophenol could still be completely reduced within 6 min in the fifth successive cycle. The superior catalytic performance of the nanocomposite is attributed to the synergistic effect between the highly dispersed CoOOH nanorings and the unique surface properties of the reduced graphene oxide nanosheets, which greatly increased the concentration of p-nitrophenol near CoOOH nanorings on reduced graphene oxide surface and improved the local electron density at the interface.