Stress response of fibroblasts adherent to the surface of plasma-treated poly(lactic-co-glycolic acid) nanofiber matrices

Reduced Fibroblast Activation on Electrospun Polycaprolactone Scaffolds

In vivo, quiescent fibroblasts reside in three-dimensional connective tissues and are activated in response to tissue injury before proliferating rapidly and becoming migratory and contractile myofibroblasts. When deregulated, chronic activation drives fibrotic disease. Fibroblasts cultured on stiff 2D surfaces display a partially activated phenotype, whilst many 3D environments limit fibroblast activation. Cell mechanotransduction, spreading, polarity, and integrin expression are controlled by material mechanical properties and micro-architecture. Between 3D culture systems, these features are highly variable, and the challenge of controlling individual properties without altering others has led to an inconsistent picture of fibroblast behaviour. Electrospinning offers greater control of mechanical properties and microarchitecture making it a valuable model to study fibroblast activation behaviour in vitro. Here, we present a comprehensive characterisation of the activation traits of human oral fibroblasts grown on a microfibrous scaffold composed of electrospun polycaprolactone. After over 7 days in the culture, we observed a reduction in proliferation rates compared to cells cultured in 2D, with low KI67 expression and no evidence of cellular senescence. A-SMA mRNA levels fell, and the expression of ECM protein-coding genes also decreased. Electrospun fibrous scaffolds, therefore, represent a tuneable platform to investigate the mechanisms of fibroblast activation and their roles in fibrotic disease.

Understanding Fibroblast Behavior in 3D Biomaterials

Traditional monolayer culture fails to fully recapitulate the in vivo environment of connective tissue cells such as the fibroblast. When cultured on stiff two-dimensional (2D) plastic, fibroblasts become highly proliferative forming broad lamellipodia and stress fibers. Conversely, in different three-dimensional (3D) culture systems, fibroblasts have displayed a diverse array of features; from an "activated" phenotype like that observed in 2D cultures and by myofibroblasts, to a quiescent state that likely better represents in vivo fibroblasts at rest. Today, a plethora of microfabrication techniques have made 3D culture commonplace, for both tissue engineering purposes and in the study of basic biological interactions. However, establishing the in vivo mimetic credentials of different biomimetic materials is not always straightforward, particularly in the context of fibroblast responses. Fibroblast behavior is governed by the complex interplay of biological features such as integrin binding sites, material mechanical properties that influence cellular mechanotransduction, and microarchitectural features like pore and fiber size, as well as chemical cues. Furthermore, fibroblasts are a heterogeneous group of cells with specific phenotypic traits dependent on their tissue of origin. These features have made understanding the influence of biomaterials on fibroblast behavior a challenging task. In this study, we present a review of the strategies used to investigate fibroblast behavior with a focus on the material properties that influence fibroblast activation, a process that becomes pathological in fibrotic diseases and certain cancers.

ECM Mimetic Electrospun Porous Poly (L-lactic acid) (PLLA) Scaffolds as Potential Substrates for Cardiac Tissue Engineering

Cardiac tissue engineering (CTE) aims to generate potential scaffolds to mimic extracellular matrix (ECM) for recreating the injured myocardium. Highly porous scaffolds with properties that aid cell adhesion, migration and proliferation are critical in CTE. In this study, electrospun porous poly (l-lactic acid) (PLLA) porous scaffolds were fabricated and modified with different ECM derived proteins such as collagen, gelatin, fibronectin and poly-L-lysine. Subsequently, adult human cardiac fibroblasts (AHCF) were cultured on the protein modified and unmodified fibers to study the cell behavior and guidance. Further, the cytotoxicity and reactive oxygen species (ROS) assessments of the respective fibers were performed to determine their biocompatibility. Excellent cell adhesion and proliferation of the cardiac fibroblasts was observed on the PLLA porous fibers regardless of the surface modifications. The metabolic rate of cells was on par with the conventional cell culture ware while the proliferation rate surpassed the latter by nearly two-folds. Proteome profiling revealed that apart from being an anchorage platform for cells, the surface topography has modulated significant expression of the cellular proteome with many crucial proteins responsible for cardiac fibroblast growth and proliferation.

Fabrication and Plasma Modification of Nanofibrous Tissue Engineering Scaffolds

This paper provides a comprehensive overview of nanofibrous structures for tissue engineering purposes and the role of non-thermal plasma technology (NTP) within this field. Special attention is first given to nanofiber fabrication strategies, including thermally-induced phase separation, molecular self-assembly, and electrospinning, highlighting their strengths, weaknesses, and potentials. The review then continues to discuss the biodegradable polyesters typically employed for nanofiber fabrication, while the primary focus lies on their applicability and limitations. From thereon, the reader is introduced to the concept of NTP and its application in plasma-assisted surface modification of nanofibrous scaffolds. The final part of the review discusses the available literature on NTP-modified nanofibers looking at the impact of plasma activation and polymerization treatments on nanofiber wettability, surface chemistry, cell adhesion/proliferation and protein grafting. As such, this review provides a complete introduction into NTP-modified nanofibers, while aiming to address the current unexplored potentials left within the field.

Polydopamine-modified poly(l-lactic acid) nanofiber scaffolds immobilized with an osteogenic growth peptide for bone tissue regeneration

It is highly desirable for bone tissue engineering scaffolds to have significant osteogenic properties and capability to improve cell growth and thus enhance bone regeneration. In this study, a poly(l-lactic acid) (PLLA) nanofiber scaffold-immobilized osteogenic growth peptide (OGP) was prepared via polydopamine (PDA) coating. X-ray photoelectron spectroscopy (XPS), contact angle measurement, and scanning electron microscopy (SEM) were used to determine the OGP immobilization, hydrophilicity and surface roughness of the samples. The SEM and fluorescence images demonstrate that the PLLA nanofiber scaffolds immobilized with the OGP have excellent cytocompatibility in terms of cell adhesion and proliferation. The ALP activity and the Runx2 and OPN expression results indicated that the PLLA nanofiber scaffolds immobilized with OGP significantly enhanced the osteogenic differentiation and calcium mineralization of hMSCs in vitro. A rat model of critical skull bone defect was selected to evaluate the bone formation capacity of the scaffolds. Micro CT analysis and histological results demonstrated that the PLLA scaffolds immobilized with OGP significantly promoted bone regeneration in critical-sized bone defects. This study verifies that the PLLA scaffold-immobilized OGP has significant potential in bone tissue engineering.

Polydopamine-modified PLLA nanofiber scaffolds immobilized with osteogenic growth peptide were designed and prepared for promoting bone formation.

Application of PLGA/FGF-2 coaxial microfibers in spinal cord tissue engineering: an in vitro and in vivo investigation

Aim: Scaffolds are a promising approach for spinal cord injury (SCI) treatment. FGF-2 is involved in tissue repair but is easily degradable and presents collateral effects in systemic administration. In order to address the stability issue and avoid the systemic effects, FGF-2 was encapsulated into core–shell microfibers by coaxial electrospinning and its in vitro and in vivo potential were studied. Materials & methods: The fibers were characterized by physicochemical and biological parameters. The scaffolds were implanted in a hemisection SCI rat model. Locomotor test was performed weekly for 6 weeks. After this time, histological analyses were performed and expression of nestin and GFAP was quantified by flow cytometry. Results: Electrospinning resulted in uniform microfibers with a core–shell structure, with a sustained liberation of FGF-2 from the fibers. The fibers supported PC12 cells adhesion and proliferation. Implanted scaffolds into SCI promoted locomotor recovery at 28 days after injury and reduced GFAP expression. Conclusion: These results indicate the potential of these microfibers in SCI tissue engineering.

[Formula: see text]

Zwitterionic Polyhydroxybutyrate Electrospun Fibrous Membranes with a Compromise of Bioinert Control and Tissue-Cell Growth

We present a method for surface modification by thermal-evaporation self-assembling of poly(3-hydroxybutyrate) (PHB) fibrous membranes with a copolymer of hydrophobic octadecyl acrylate repeat units and hydrophilic zwitterionic 4-vinylpyridine blocks, zP(4VP-r-ODA), in view of controlling biofoulant-fiber interactions. PHB is of interest as a material for bioscaffolding, but its disadvantage is its hydrophobicity, which leads to unwanted interactions with proteins, blood cells, or bacteria. Surface modification of electrospun PHB fibers addresses this issue because the hydrophilicity of the membranes is improved, leading to a significant reduction in bovine serum albumin (92%), lysozyme (73%), and fibrinogen (50%) adsorption. From a coating density of 0.78 mg/cm², no bacteria interacted with the fibers, and from 1.13 mg/cm², excellent hemocompatibility of membranes was measured from thrombocytes, erythrocytes, leukocytes, and whole blood attachment tests. Additionally, HT-1080 fibroblasts were observed to develop in contact with the fibers after 3-7 days of incubation (cell density up to 329 ± 16 cells/mm²), suggesting that zP(4VP-r-ODA) provides an adequate humid environment for their growth. Providing an effective control of the surface chemistry and of the coating density, the association of PHB and zP(4VP-r-ODA) can promote the growth of fibroblasts, still maintaining resistance to unwanted biofoulants, and appears to be a promising composite material for tissue engineering.

Bioactive peptide functionalized aligned cyclodextrin nanofibers for neurite outgrowth

Guidance of neurite extension and establishment of neural connectivity hold great importance for neural tissue regeneration and neural conduit implants. Although bioactive-epitope functionalized synthetic or natural polymeric materials have been proposed for the induction of neural regeneration, chemical modifications of these materials for neural differentiation still remain a challenge due to the harsh conditions of chemical reactions, along with non-homogeneous surface modifications. In this study, a facile noncovalent functionalization method is proposed by exploiting host-guest interactions between an adamantane-conjugated laminin derived bioactive IKVAV epitope and electrospun cyclodextrin nanofibers (CDNFs) to fabricate implantable scaffolds for peripheral nerve regeneration. While electrospun CDNFs introduce a three-dimensional biocompatible microenvironment to promote cellular viability and adhesion, the bioactive epitopes presented on the surface of electrospun CDNFs guide the cellular differentiation of PC-12 cells. In addition to materials synthesis and smart functionalization, physical alignment of the electrospun nanofibers guides the cells for enhanced differentiation. Cells cultured on aligned and IKVAV functionalized electrospun CDNFs had significantly higher expression of neuron-specific βIII-tubulin and synaptophysin. The neurite extension is also higher on the bioactive aligned scaffolds compared to random and non-functionalized electrospun CDNFs. Both chemical and physical cues were utilized for an effective neuronal differentiation process.

Biodegradable fiducial markers for X-ray imaging – soft tissue integration and biocompatibility

This study aims at investigation of material for innovative fiducial markers for soft tissue in X-ray based medical imaging. NH₃ plasma modified P[LAcoCL] combined with BaSO₄ and hydroxyapatite as radio-opaque fillers appears to be a promising material systems for this application.

Effect of nanofiber content on bone regeneration of silk fibroin/poly(ε-caprolactone) nano/microfibrous composite scaffolds

The broad application of electrospun nanofibrous scaffolds in tissue engineering is limited by their small pore size, which has a negative influence on cell migration. This disadvantage could be significantly improved through the combination of nano- and microfibrous structure. To accomplish this, different nano/microfibrous scaffolds were produced by hybrid electrospinning, combining solution electrospinning with melt electrospinning, while varying the content of the nanofiber. The morphology of the silk fibroin (SF)/poly(ε-caprolactone) (PCL) nano/microfibrous composite scaffolds was investigated with field-emission scanning electron microscopy, while the mechanical and pore properties were assessed by measurement of tensile strength and mercury porosimetry. To assay cell proliferation, cell viability, and infiltration ability, human mesenchymal stem cells were seeded on the SF/PCL nano/microfibrous composite scaffolds. From in vivo tests, it was found that the bone-regenerating ability of SF/PCL nano/microfibrous composite scaffolds was closely associated with the nanofiber content in the composite scaffolds. In conclusion, this approach of controlling the nanofiber content in SF/PCL nano/microfibrous composite scaffolds could be useful in the design of novel scaffolds for tissue engineering.

Coaxial electrospun poly(lactic acid)/silk fibroin nanofibers incorporated with nerve growth factor support the differentiation of neuronal stem cells

Plasma treated PLA/silk fibroin/NGF nanofibers with core–shell structure could enhance the neuronal differentiation of PC12 cells.

Challenges in the characterization of plasma-processed three-dimensional polymeric scaffolds for biomedical applications

Low-temperature plasmas offer a versatile method for delivering tailored functionality to a range of materials. Despite the vast array of choices offered by plasma processing techniques, there remain a significant number of hurdles that must be overcome to allow this methodology to realize its full potential in the area of biocompatible materials. Challenges include issues associated with analytical characterization, material structure, plasma processing, and uniform composition following treatment. Specific examples and solutions are presented utilizing results from analyses of three-dimensional (3D) poly(ε-caprolactone) scaffolds treated with different plasma surface modification strategies that illustrate these challenges well. Notably, many of these strategies result in 3D scaffolds that are extremely hydrophilic and that enhance human Saos-2 osteoblast cell growth and proliferation, which are promising results for applications including tissue engineering and advanced biomedical devices.

The Compatibility of Swine BMDC-derived Bile Duct Endothelial Cells with a Nanostructured Electrospun PLGA Material

Purpose

To investigate the production of bile duct endothelial cells via directed differentiation of porcine bone marrow mesenchymal stem cells (BMSCs) down the hepatic lineage in vitro and the biocompatibility of differentiated bile duct endothelial cells with electrospun nanofibers.

Methods

Porcine BMSCs were differentiated in vitro into bile duct endothelial cells, which were identified by morphology and RT-PCR. PLGA nanofiber membranes were prepared by electrospinning. The morphology was detected by scanning electron microscopy and the short-term (two weeks) in vitro degradation rate was determined. Adhesion and proliferation of the bile duct endothelial cells on the nanofiber surface were analyzed by calculating the cell adhesion rate and MTT assay, respectively. Cell growth, morphology and distribution on the material surface were observed by fluorescence staining and scanning electron microscopy, respectively.

Results

After four weeks of directed differentiation of BMSCs in vitro, cells showed the typical morphology of dendritic bile duct endothelial cells and had the expression of CK19. Scanning electron micrographs showed that electrospun materials were continuous nanofibers with diameters between 200 and 500 nm. No significant degradation of the PLGA nanofibers was observed within two weeks. Based on the measured cell adhesion rate, MTT assay, fluorescence staining, and scanning electron microscopy, the differentiated cells possess a good proliferative capacity on PLGA nanofibers.

Conclusions

BMSCs can be differentiated into the bile duct endothelial cells in vitro. Materials prepared by the electrospinning method have a nanofiber structure, which does not significantly degrade within two weeks. Differentiated cells exhibit good biocompatibility with the nanofibers.

Charged nanomatrices as efficient platforms for modulating cell adhesion and shape

In this article, we describe the design and manipulation of charged nanomatrices and their application as efficient platforms for modulating cell behaviors. Using electrospraying technology and well designed biomaterials, poly(ɛ-caprolactone; PCL) and polyethylenimine, the negatively charged PCL nanomatrix (nPCL nanomatrix) and the positively charged PCL nanomatrix (pPCL nanomatrix) were fabricated. It was demonstrated that cell adhesion, affinity, and shape were sensitively modulated in negatively and positively charged nanomatrices. Our results showed that the pPCL nanomatrix promoted adhesion of NIH 3T3 fibroblast cells as compared to the nPCL nanomatrix. When fluid shear stress was applied, cell affinity on the pPCL nanomatrix increased even more. NIH 3T3 fibroblast cells adopted a relatively spherical shape on the pPCL nanomatrix while adopting an aligned, narrow shape on the nPCL nanomatrix. It was also found that charged nanomatrices influenced the cross-sectional cell shape. The cross-sectional cell shape on the pPCL nanomatrix was extremely flattened, whereas the cross-sectional cell shape was relatively round on the nPCL nanomatrix and some of the adhered cells floated. We also showed that the surfaces of the nPCL and pPCL nanomatrices adsorbed the different serum proteins. These results collectively demonstrated a combination of environmental factors including nanoscale structure, electrostatic forces, and absorption of biomolecules on charged substrates affected cell response in terms of cellular adhesion and shape.