Surface characterization of ginger powder examined by X-ray photoelectron spectroscopy and scanning electron microscopy

Fluorescence lifetime imaging microscopy as a tool to characterize spice powder variations for quality and authenticity purposes: A ginger case study

Spices are usually ground for applications and the resulting particle size of the powders is an important product attribute in view of the release of flavour. However, inhomogeneity of the original material may lead to variations in the physicochemical characteristics of the particles. This variation and its linkage to particle size may be examined by particular imaging techniques. This study aimed to explore the potential of Fluorescence Lifetime Imaging Microscopy (FLIM) to characterize spice powders according to particle size variations and correlation with their pigment contents to reveal the chemical information contained within the FLIM data. Ginger powder was used as a representative powder model. The FLIM profiles of the individual samples and populations revealed that FLIM coupled with the phasor approach has the capacity to characterize spice powder according to particle size. Meanwhile, Principal Component Analysis of pre-processed FLIM data revealed clustering of particle size groups. Further correlation analysis between the pigment compound contents and FLIM data of the ginger powders indicated that FLIM reflected chemical information of ginger powder and was able to visualize endogenous fluorophores. The current study revealed the potential of FLIM to characterize ginger powder particles. This approach may be extrapolated to other spice powder products. The new knowledge is a step further in paving the way for the application of innovative techniques, already prevalent in other domains, to food quality and authentication.

Sucrose ester alleviates the agglomeration behavior of bamboo shoot dietary fiber treated via high pressure homogenization: Influence on physicochemical, rheological, and structural properties

High-pressure homogenization (HPH) is a physical modification method that can rapidly reduce the particle size of bamboo shoot dietary fiber (BSDF), but it can lead to agglomeration. Therefore, the effects of the addition of sucrose ester (SE) to alleviate the agglomeration of BSDF during HPH were investigated. Compared with BSDF without added SE, BSDF obtained the smallest particle size (276.5 nm) and highest ζ-Potential (53.6 mV) when SE was 5 g/L. Water-holding capacity, oil-holding capacity, swelling capacity, and b* increased, whereas L* and a* decreased significantly with the addition of SE. The shear stress and viscoelasticity of BSDF solution were minimized when 5 g/L SE was added. SE reduced relative crystallinity and thermal stability of BSDF. SE could effectively alleviate the aggregation of BSDF through the mechanism of electrostatic repulsion. This study highlights an innovative and promising strategy for alleviating the agglomeration behavior of BSDF during HPH treatment.

A sense of ginger fraud: prevalence and deconstruction of the China-European union supply chain

As an important spice, ginger has been widely distributed in the Chinese and the European Union (EU) markets, the two largest trading areas, in various forms. The ginger supply chain between China and the EU is long and complex, providing opportunities for fraudsters to deceive consumers. However, limited attention has been given to food fraud in ginger, and there is a lack of research on this topic. In this review, ginger was used as an example for interpreting the fraud issues within low-priced and high-trade volume spice products. This review aims to summarize the open access information from food and food fraud databases, literature, and stakeholders about ginger fraud, and to map, deconstruct and analyse the food fraud vulnerability in the supply chain. In addition, potential testing strategies to detect ginger fraud were also discussed. The investigation of food fraud databases, a semi-structured literature review and online interviews with stakeholders revealed that adulteration is the major fraud type in ginger products. And the most vulnerable ginger products are ground ginger and finely processed ginger. The ginger supply chain from China to the EU comprises nine stages and is medium vulnerable to food fraud, both in regard to opportunities and motivational drivers. To ensure the integrity of the ginger supply chain, there is a need to apply fraud vulnerability tools in the companies of the industry. In addition, screening and confirmatory techniques based on the characteristics of ginger should be utilised for monitoring fraud issues in the supply chain.

Effects of superfine pulverization technology on the morphology, microstructure, and physicochemical properties of Apium graveolens L. root

In this study, the characteristics of the transverse section of Apium graveolens L. root (AR) were observed. The surface morphology, physicochemical properties, and antioxidant activity of five kinds of powders obtained by superfine pulverization (850-355, 355-180, 180-125, 125-50, and <50 μm) were evaluated. Under the microscope, the transverse section of AR had distinct identification features. Parenchyma cells, cork cells, vessels, fibers, nonglandular hair, and tubing fragments were observed via powder microscopic identification. Scanning electron microscopy (SEM) revealed that superfine pulverization evidently changed the shape and surface morphology of the AR powders. As particle size decreased, the moisture and oil-binding capacity (OBC) of AR powder decreased, whereas its total ash content, water solubility index (WSI), swelling capacity (SC), water-holding capacity (WHC), bulk densities, tapped densities, repose angles, slide angles, and crash angles increased. The AR powder with a particle size of <50 μm had the highest contents of total flavonoids (30.46 mg/g), apiin (15.29 mg/g), and 3'-methoxyapiin (6.78 mg/g). Fourier transform infrared spectroscopy (FTIR) analysis revealed that the chemical composition of the powder and its extracts did not notably change as particle size decreased. Meanwhile, the scavenging ability of DPPH and ABTS radicals increased with the decrease of particle size. Therefore, there are more obvious differences in physicochemical properties and antioxidant activity of AR powders with different particle sizes. This study provides a theoretical basis for the development and application of new AR products.

Effects of Airflow Ultrafine-Grinding on the Physicochemical Characteristics of Tartary Buckwheat Powder

Five different ultrafine milled flours (UMFs) were prepared from Tartary buckwheat via airflow ultrafine-grinding at different grinding pressures. The airflow ultrafine-grinding resulted in marked differences in particle size (from 100 to 10 μm). The UMFs were all brighter in appearance (higher L*) than Tartary buckwheat common flour (TBCF). Illustrated by the example of 70 °C, the UMFs were also found to have a greater water holding capacity (from 4.42 g/g to 5.24 g/g), water solubility (from 12.57% to 14.10%), and water solubility index (from 5.11% to 6.10%). Moreover, as the particle sizes reduced, the moisture content decreased (from 10.05 g/100 g DW to 7.66 g/100 g DW), as did the total starch content (from 68.88 g/100 g DW to 58.24 g/100 g DW) and the protein content (from 13.16% to 12.04%). However, the grinding process was also found to have negative effects on the mineral content of the Tartary buckwheat. Additionally, several substantial variations were found in their hydration properties along with grinding pressure changes in the differently ground UMFs. Consequently, fine Tartary buckwheat powders of a bright yellow color, with superior food processing properties, were prepared in this study by airflow ultrafine-grinding.

Value-added application of Platycodon grandiflorus (Jacq.) A.DC. roots (PGR) by ultrasound-assisted extraction (UAE) process to improve physicochemical quality, structural characteristics and functional properties

Platycodon grandiflorus (Jacq.) A.DC. roots (PGR), a Chinese herb with medicinal and edible value, was powdered by freeze drying (FD) and spray drying (SD) after maceration extraction (ME) or ultrasound-assisted extraction (UAE) to develop a new functional food product. Four PGR powders were obtained namely ME-FD, ME-SD, UAE-FD, and UAE-SD and their powder quality, structural properties, and functionalities were evaluated. UAE-FD powder had the highest powder recovery (85.3 ± 5.79%) and also presented better hydration properties due to the larger particle size compared with other three PGR powders. Four PGR powders exhibited similar thermal decomposition process, molecular structure, amorphous characteristics, amino acids composition, and taste profiles. Furthermore, the UAE-FD PGR powders presented the highest Platycodin D (3.68 ± 0.04 mg/g), total phenolic (2.84 ± 0.11 mg GAE/g), and total flavonoids content (2.11 ± 0.14 mg RE/g), resulting in best antioxidant activity (58.67 ± 2.42 μmol Trolox/g). Therefore UAE-FD is an environment-friendly technique for the production of functional PGR powder with improved nutritional and redispersion properties.

Effects of ultrafine grinding on physicochemical, functional and surface properties of ginger stem powders

BACKGROUND

Ginger stem (GS) is a by-product of ginger processing. It is not directly edible as a feed or food, which leads to it being discarded as waste or burned. Accordingly, it is very important to develop new functional products in the food or feed industry as a result of high nutritional and medicinal values. In the present study, the structures and physicochemical properties of GS powders of different sizes were evaluated after ultrafine grinding by a vibrating mill.

RESULTS

The ultrafine powders exhibited a smaller particle size and uniform distribution. Higher values in bulk density (from 1.07 ± 0.06 to 1.62 ± 0.08 g mL-1 ), oil holding capacity (from 3.427 ± 0.04 to 4.83 ± 0.03 g mL-1 ), and repose and slide angles (from 42.33 ± 1.52 to 54.36 ± 1.15° and 33.62 ± 0.75 to 47.27 ± 1.34°, respectively) of ultrafine GS powders were exhibited compared to coarse powders. With a reduced particle size, the solubility of ultrafine powders increased significantly (P < 0.05), whereas the water holding and swelling capacities decreased with a reduced particle size and then increased. Fourier transform infrared spectroscopy analysis showed that ultrafine grinding did not damage the main cellular structure of GS powder. The reduction of fiber length and particle size in GS was observed by light microscopy and scanning electron microscopy. The X-ray diffraction patterns demonstrated the crystallinity and the intensity of the peak in superfine GS powders.

CONCLUSION

The present study suggests that ultrafine grinding treatments influence the structures and physicochemical properties of GS powders, and such changes would improve the effective utilization of GS in the food or feed industry. © 2020 Society of Chemical Industry.

Development of a standardized food model for studying the impact of food matrix effects on the gastrointestinal fate and toxicity of ingested nanomaterials

Food matrix effects impact the bioavailability and toxicity of pharmaceuticals, nutraceuticals, pesticides, and engineered nanomaterials (ENMs). However, there are currently no standardized food models to test the impact of food matrix effects using in vitro gastrointestinal models. The purpose of this study was to establish a standardized food model (SFM) for evaluating the toxicity and fate of ingested ENMs and then to assess its efficacy by examining the impact of food matrix effects on the toxicity of TiO2 nanoparticles. The formulation of the SFM was based on the average composition of the US diet: 3.4% protein (sodium caseinate); 4.6% sugar (sucrose); 5.2% digestible carbohydrates (modified corn starch); 0.7% dietary fiber (pectin); 3.4% fat (corn oil); and, 0.5% minerals (sodium chloride). The SFM consisted of an oil-in-water emulsion suitable for use in both wet and dried forms. The dried form was produced by spray drying the emulsion to improve its handling and extend its shelf-life. The particle size (D32 = 135 nm), surface charge (-37.8 mV), viscosity, color (L*, a,* b* = 82.1, -2.5, 1.3), and microstructure of the wet SFM were characterized. The hydration properties, flowability (repose angle ≈ 27.9°; slide angle ≈ 28.2°), and moisture sorption isotherms of the dry SFM were comparable to commercial food powders. The potential gastrointestinal fate of the SFM was determined using a simulated gastrointestinal tract, including mouth, stomach, and small intestine steps. Conversion of the SFM into a powdered form did not impact its gastrointestinal fate. A nanotoxicology case study with TiO2 nanoparticles exposed to a tri-culture epithelial cell model showed that food matrix effects reduced ENM cytotoxicity more than 5-fold. The SFM developed in the current study could facilitate studies of the impact of food matrix effects on the gastrointestinal fate and toxicity of various types of food NPs.

Preparation and characterization of Dendrobium officinale powders through superfine grinding

BACKGROUND

Dendrobium officinale has been used in China for several thousand years as a health food and has become one of the most expensive tea materials worldwide as a result of extremely scarce resources in the wild and an increasing demand. Hence, it is very important to improve the depth and width of its application. In the present study, the physico-chemical, surface chemistry and thermal properties of micron range particles and coarse particles prepared by superfine grinding and shear pulverization were investigated.

RESULTS

As the particle size decreased, the specific surface area of D. officinale powders increased significantly. Microscopy observations confirmed that superfine grinding effectively changed the original structure of D. officinale. The Fourier transform infrared spectroscopy spectra depicted the characteristic bands shifted in terms of absorbance and/or wave number as the powder particle size decreased. The crystallinity and intensity of the crystal peaks of D. officinale powders increased as the particle size decreased. Moisture sorption isotherms suggested that superfine powders were more unstable as a result of the increase in surface area, as well as the exposure of polar groups.

CONCLUSION

The results of the present study suggest that superfine grinding may provide new methods of processing for D. officinale with respect to further enhancement of its application value. © 2017 Society of Chemical Industry.

Surface characterization of oxidized myofibrils using X-ray photoelectron spectroscopy and scanning electron microscopy

The functional properties of myofibrils depend largely on their surface characteristics. Changes in surface characteristics of myofibrils after chemical oxidation were elucidated using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy. Myofibrils were oxidized by a hydroxyl radical generating system. Lipid oxidation and phospholipid distribution were altered during the oxidative processing. Results from particle size analysis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and salt solubility indicated that protein cross-linking and fragmentation occurred during the oxidation of myofibrils. XPS analysis of C 1s, N 1s, and O 1s spectra suggested that surface chemical function concentrations changed significantly because of the modification of amino acid side chains that rendered protein cross-links and fragmentation and phospholipid alteration. Analysis of the correlation between the surface chemical composition and parameters of particle size distributions confirmed that protein carbonylation and phospholipid alteration were involved in protein surface modification. Results of the microstructure analysis were in agreement with those of particle size and XPS analysis.

Surface characterization of 7S and 11S globulin powders from soy protein examined by X-ray photoelectron spectroscopy and scanning electron microscopy

In this study the surface composition of 7S and 11S globulin powders from soybean proteins by aqueous buffer and reverse micelle extractions had been examined using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Analysis by XPS revealed that the O and N atomic percentage of 7S and 11S globulin surfaces from bis(2-ethylhexyl) sodium sulfosuccinate (AOT) reverse micelle was higher than from aqueous buffer, but the C atomic percentage was lower. The O/C ratio of the 7S globulin powder from aqueous buffer and reverse micelle was similar while significant differences were obtained in the O/C ratio of the 11S globulin powder, N/C atom ratios of the 7S and 11S globulin powders and high-resolution XPS C 1s, N 1s, O 1s spectra. Powder microstructure after reverse micelle treatment showed the presence of small pores, indicating the effect of reverse micelle on the 7S and 11S globulin structure. The obtained results indicated that the reverse micelle could affect the C, O and N components on the surface of soybean proteins.