Interaction force measurement between E. coli cells and nanoparticles immobilized surfaces by using AFM

Employing Atomic Force Microscopy (AFM) for Microscale Investigation of Interfaces and Interactions in Membrane Fouling Processes: New Perspectives and Prospects

Membrane fouling presents a significant challenge in the treatment of wastewater. Several detection methods have been used to interpret membrane fouling processes. Compared with other analysis and detection methods, atomic force microscopy (AFM) is widely used because of its advantages in liquid-phase in situ 3D imaging, ability to measure interactive forces, and mild testing conditions. Although AFM has been widely used in the study of membrane fouling, the current literature has not fully explored its potential. This review aims to uncover and provide a new perspective on the application of AFM technology in future studies on membrane fouling. Initially, a rigorous review was conducted on the morphology, roughness, and interaction forces of AFM in situ characterization of membranes and foulants. Then, the application of AFM in the process of changing membrane fouling factors was reviewed based on its in situ measurement capability, and it was found that changes in ionic conditions, pH, voltage, and even time can cause changes in membrane fouling morphology and forces. Existing membrane fouling models are then discussed, and the role of AFM in predicting and testing these models is presented. Finally, the potential of the improved AFM techniques to be applied in the field of membrane fouling has been underestimated. In this paper, we have fully elucidated the potentials of the improved AFM techniques to be applied in the process of membrane fouling, and we have presented the current challenges and the directions for the future development in an attempt to provide new insights into this field.

Electrostatics Control Nanoparticle Interactions with Model and Native Cell Walls of Plants and Algae

A lack of mechanistic understanding of nanomaterial interactions with plants and algae cell walls limits the advancement of nanotechnology-based tools for sustainable agriculture. We systematically investigated the influence of nanoparticle charge on the interactions with model cell wall surfaces built with cellulose or pectin and performed a comparative analysis with native cell walls of Arabidopsis plants and green algae (Choleochaete). The high affinity of positively charged carbon dots (CDs) (46.0 ± 3.3 mV, 4.3 ± 1.5 nm) to both model and native cell walls was dominated by the strong ionic bonding between the surface amine groups of CDs and the carboxyl groups of pectin. In contrast, these CDs formed weaker hydrogen bonding with the hydroxyl groups of cellulose model surfaces. The CDs of similar size with negative (-46.2 ± 1.1 mV, 6.6 ± 3.8 nm) or neutral (-8.6 ± 1.3 mV, 4.3 ± 1.9 nm) ζ-potentials exhibited negligible interactions with cell walls. Real-time monitoring of CD interactions with model pectin cell walls indicated higher absorption efficiency (3.4 ± 1.3 10-9) and acoustic mass density (313.3 ± 63.3 ng cm-2) for the positively charged CDs than negative and neutral counterparts (p < 0.001 and p < 0.01, respectively). The surface charge density of the positively charged CDs significantly enhanced these electrostatic interactions with cell walls, pointing to approaches to control nanoparticle binding to plant biosurfaces. Ca2+-induced cross-linking of pectin affected the initial absorption efficiency of the positively charged CD on cell wall surfaces (∼3.75 times lower) but not the accumulation of the nanoparticles on cell wall surfaces. This study developed model biosurfaces for elucidating fundamental interactions of nanomaterials with cell walls, a main barrier for nanomaterial translocation in plants and algae in the environment, and for the advancement of nanoenabled agriculture with a reduced environmental impact.

Hypertonic stress induced changes of Pseudomonas fluorescens adhesion towards soil minerals studied by AFM

Studying bacterial adhesion to mineral surfaces is crucial for understanding soil properties. Recent research suggests that minimal coverage of sand particles with cell fragments significantly reduces soil wettability. Using atomic force microscopy (AFM), we investigated the influence of hypertonic stress on Pseudomonas fluorescens adhesion to four different minerals in water. These findings were compared with theoretical XDLVO predictions. To make adhesion force measurements comparable for irregularly shaped particles, we normalized adhesion forces by the respective cell-mineral contact area. Our study revealed an inverse relationship between wettability and the surface-organic carbon content of the minerals. This relationship was evident in the increased adhesion of cells to minerals with decreasing wettability. This phenomenon was attributed to hydrophobic interactions, which appeared to be predominant in all cell-mineral interaction scenarios alongside with hydrogen bonding. Moreover, while montmorillonite and goethite exhibited stronger adhesion to stressed cells, presumably due to enhanced hydrophobic interactions, kaolinite showed an unexpected trend of weaker adhesion to stressed cells. Surprisingly, the adhesion of quartz remained independent of cell stress level. Discrepancies between measured cell-mineral interactions and those calculated by XDLVO, assuming an idealized sphere-plane geometry, helped us interpret the chemical heterogeneity arising from differently exposed edges and planes of minerals. Our results suggest that bacteria may have a significant impact on soil wettability under changing moisture condition.

The surface groups of polystyrene nanoparticles control their interaction with the methanogenic archaeon Methanosarcina acetivorans

A better understanding of the interaction between nanoplastics and archaea is crucial to fill the knowledge gaps regarding the ecological safety of nanoplastics. As a vital source for global methane emissions, methanogenic archaea have unique cell membranes that are distinctly different from those in all other forms of life, little is known about their interaction with nanoplastics. Here, we show that polystyrene nanoparticles functionalized with sulfonic acid (PS-SO₃H) and amino (PS-NH₂) interact with this methanogenic archaeon in distinct ways. Although both of them have no significant phenotype effects on Methanosarcina acetivorans C2A, these nanoparticles could affect DNA-mediated transposition of this methanogenic archaeon, and PS-SO₃H also downregulated nitrogen fixation, nitrogen cycle metabolic process, oxidoreductase activity, etc. In addition, both nanoplastics decreased the protein contents in the extracellular polymer substances (EPS), with distinct binding sequences to the functional groups of the EPS. The single particle atomic force microscopy revealed that the force between the amino group and the M. acetivorans C2A was greater than that of sulfonic acid group. Our results exhibit that the surface groups of polystyrene nanoparticles control their risk on the methanogenic archaea, and these effects might influence their contribution on global methane emission.

Understanding the role of surface interactions in the antibacterial activity of layered double hydroxide nanoparticles by atomic force microscopy

Understanding the mechanisms of the interactions between zinc-based layered double hydroxides (LDHs) and bacterial surfaces is of great importance to improve the efficiency of these antibiotic-free antibacterial agents. In fact, the role of surface interactions in the antibacterial activity of zinc-based LDH nanoparticles compared to that of dissolution and generation of reactive oxygen species (ROS) is still not well documented. In this study, we show that ZnAl LDH nanoparticles exhibit a strong antibacterial effect against Staphylococcus aureus by inducing serious cell wall damages as revealed by the antibacterial activity tests and atomic force microscopy (AFM) imaging, respectively. The comparison of the antibacterial properties of ZnAl LDH nanoparticles and micron-sized ZnAl LDHs also demonstrated that the antibacterial activity of Zn-based LDHs goes beyond the simple dissolution into Zn²⁺ antibacterial ions. Furthermore, we developed an original approach to functionalize AFM tips with LDH films in order to probe their interactions with living S. aureus cells by means of AFM-based force spectroscopy (FS). The force spectroscopy analysis revealed that antibacterial ZnAl LDH nanoparticles show specific recognition of S. aureus cells with high adhesion frequency and remarkable force magnitudes. This finding provides a first insight into the antibacterial mechanism of Zn-based LDHs through direct surface interactions by which they are able to recognize and adhere to bacterial surfaces, thus damaging them and leading to subsequent growth inhibition.

Crack patterns of drying dense bacterial suspensions

Drying of bacterial suspensions is frequently encountered in a plethora of natural and engineering processes. However, the evaporation-driven mechanical instabilities of dense consolidating bacterial suspensions have not been explored heretofore. Here, we report the formation of two different crack patterns of drying suspensions of Escherichia coli (E. coli) with distinct motile behaviors. Circular cracks are observed for wild-type E. coli with active swimming, whereas spiral-like cracks form for immotile bacteria. Using the elastic fracture mechanics and the poroelastic theory, we show that the formation of the circular cracks is determined by the tensile nature of the radial drying stress once the cracks are initiated by the local order structure of bacteria due to their collective swimming. Our study demonstrates the link between the microscopic swimming behaviors of individual bacteria and the mechanical instabilities and macroscopic pattern formation of drying bacterial films. The results shed light on the dynamics of active matter in a drying process and provide useful information for understanding various biological processes associated with drying bacterial suspensions.

Keeping a Clean Surface under Water: Nanoscale Nipple Array Decreases Surface Adsorption and Adhesion Forces

While nanoscale nipple arrays are expected to reduce light reflection and/or dust contamination in some insects, similar structures have been reported in various marine invertebrates. To evaluate the anti-contamination property of the structure in aquatic regimes, we measured the adsorption and adhesion forces on the flat surface and MOSMITE™ (Mitsubishi Chemical Corporation, Tokyo, Japan), a synthetic material mimicking the nipple array, under water. A small force toward the surface occurred when the probe approached the substrate surface. This adsorption force was significantly smaller on MOSMITE™ than on the flat surface. The adhesion force toward the surface occurred when the probe was detached from the surface, and it was also significantly smaller on MOSMITE™ than on the flat surface. The adhesion force in the air was much greater than the force under water, and the force was also significantly smaller on MOSMITE™ than on the flat surface. In the aquatic regime, the nipple array provides less adsorption/adhesion properties for the surface and thus, the organisms would have less contamination of microparticles on their body surface. As the adsorption and adhesion forces are also involved in the attachment of cells, tissue, and larvae, less adhesive body surfaces should be beneficial for survival in aquatic environments, as well as land environments.

Insights into complex nanopillar-bacteria interactions: Roles of nanotopography and bacterial surface proteins

Nanopillared surfaces have emerged as a promising strategy to combat bacterial infections on medical devices. However, the mechanisms that underpin nanopillar-induced rupture of the bacterial cell membrane remain speculative. In this study, we have tested three medically relevant poly(ethylene terephthalate) (PET) nanopillared-surfaces with well-defined nanotopographies against both Gram-negative and Gram-positive bacteria. Focused ion beam scanning electron microscopy (FIB-SEM) and contact mechanics analysis were utilised to understand the nanobiophysical response of the bacterial cell envelope to a single nanopillar. Given their importance to bacterial adhesion, the contribution of bacterial surface proteins to nanotopography-mediated cell envelope damage was also investigated. We found that, whilst cell envelope deformation was affected by the nanopillar tip diameter, the nanopillar density affected bacterial metabolic activities. Moreover, three different types of bacterial cell envelope deformation were observed upon contact of bacteria with the nanopillared surfaces. These were attributed to bacterial responses to cell wall stresses resulting from the high intrinsic pressure caused by the engagement of nanopillars by bacterial surface proteins. Such influences of bacterial surface proteins on the antibacterial action of nanopillars have not been previously reported. Our findings will be valuable to the improved design and fabrication of effective antibacterial surfaces.

Probing Internal Pressures and Long-Term Stability of Nanobubbles in Water

Nanobubbles (NBs) in liquid exhibit many intriguing properties such as low buoyancy and high mass transfer efficiency and reactivity as compared to large bulk bubbles. However, it remains elusive why or how bulk NBs are stabilized in water, and particularly, the states of internal pressures of NBs are difficult to measure due to the lack of proper methodologies or instruments. This study employed the injection of high-pressure gases through a hydrophobized ceramic membrane to produce different gaseous NBs (e.g., N₂, O₂, H₂, and CO₂) in water, which is different from cavitation bubbles with potential internal low pressure and noncondensed gases. The results indicate that increasing the injection gas pressure (60-80 psi) and solution temperatures (6-40 °C) both reduced bubble sizes from approximately 400 to 200 nm, which are validated by two independent models developed from the Young-Laplace equation and contact mechanics. Particularly, the colloidal force model can explain the effects of surface tension and surface charge repulsion on bubble sizes and internal pressures. The contact mechanics model incorporates the measurement of the tip-bubble interaction forces by atomic force microscopy to determine the internal pressures and the hardness of NBs (e.g., Young's modulus). Both the colloidal force balance model and our contact mechanics model yielded consistent predictions of the internal pressures of various NBs (120-240 psi). The developed methods and model framework will be useful to unravel properties of NBs and support engineering applications of NBs (e.g., aeration or ozonation). Finally, the bulk NBs under sealed storage could be stable for around a week and progressively reduce in concentrations over the next 30-60 days.

Molecular dynamics model for the antibactericity of textured surfaces

An original model has been developed for the initial stage of bacterial adhesion on textured surfaces. Based on molecular dynamics, the model describes contact between individual bacterial cells in a planktonic state and a surface, accounting for both the mechanical properties of the cells and the physico-chemical mechanisms governing interaction with the substrate. Feasibility of the model is assessed via comparison with experimental results of bacterial growth on stainless steel substrates textured with ultrashort laser pulses. Simulations are performed for two different bacterial species, Staphylococcus aureus and Escherichia coli, on two distinct surface types characterised by elongated ripples and isolated nanopillars, respectively. Calculated results are in agreement with experiment outcomes and highlight the role of mechanical stresses within the cell wall due to deformation upon interaction with the substrate, creating unfavourable conditions for bacteria during the initial phases of adhesion. Furthermore, the flexibility of the model provides insight into the intricate interplay between topography and the physico-chemical properties of the substrate, pointing to a unified picture of the mechanisms underlying bacterial affinity to a textured surface.

Atomic Force Microscopy (AFM) As a Surface Mapping Tool in Microorganisms Resistant Toward Antimicrobials: A Mini-Review

The worldwide emergence of antimicrobial resistance (AMR) in pathogenic microorganisms, including bacteria and viruses due to a plethora of reasons, such as genetic mutation and indiscriminate use of antimicrobials, is a major challenge faced by the healthcare sector today. One of the issues at hand is to effectively screen and isolate resistant strains from sensitive ones. Utilizing the distinct nanomechanical properties (e.g., elasticity, intracellular turgor pressure, and Young’s modulus) of microbes can be an intriguing way to achieve this; while atomic force microscopy (AFM), with or without modification of the tips, presents an effective way to investigate such biophysical properties of microbial surfaces or an entire microbial cell. Additionally, advanced AFM instruments, apart from being compatible with aqueous environments—as often is the case for biological samples—can measure the adhesive forces acting between AFM tips/cantilevers (conjugated to bacterium/virion, substrates, and molecules) and target cells/surfaces to develop informative force-distance curves. Moreover, such force spectroscopies provide an idea of the nature of intercellular interactions (e.g., receptor-ligand) or propensity of microbes to aggregate into densely packed layers, that is, the formation of biofilms—a property of resistant strains (e.g., Staphylococcus aureus, Pseudomonas aeruginosa). This mini-review will revisit the use of single-cell force spectroscopy (SCFS) and single-molecule force spectroscopy (SMFS) that are emerging as powerful additions to the arsenal of researchers in the struggle against resistant microbes, identify their strengths and weakness and, finally, prioritize some future directions for research.

Ultrasound enhanced the binding ability of chitinase onto chitin: From an AFM insight

In order to evaluate the effect of ultrasound to chitinase from a molecular level, atomic force microscopy (AFM) was employed to investigate the interaction force of chitinase binding onto chitin surface. In the measurement of force-distance curve, a series of pull-off events were discovered using the immobilized AFM tips with chitinase either treated by ultrasound or not, whereas no interaction peak was observed by the AFM tips without chitinase, indicating that the obtained adhesion forces were coming from the binding functions between chitinase and chitin. Through the analysis of these force curves, at the loading velocity of 0.3 μm/s, the maximum binding force of the chitinase treated by ultrasound for 20 min onto chitin was measured to be 105.33 ± 23.51 pN, while the untreated onto chitin was 71.05 ± 12.73 pN, suggesting the stronger binding force between ultrasonic treated chitinase and chitin substrate. Therefore, AFM has provided a useful method to directly and quantitatively characterize the interactions between chitinase and chitin, and successfully proved that ultrasound could activate chitinase by enhancing the binding ability of chitinase onto chitin.

Separation, characterization and identification of microplastics and nanoplastics in the environment

Microplastics (MPs) have globally been detected in aquatic and marine environments, which has raised scientific interests and public health concerns during the past decade. MPs are those polymeric particles with at least one dimension <5 mm. MPs possess complex physicochemical properties that vary their mobility, bioavailability and toxicity toward organisms and interactions with their surrounding pollutants. Similar to nanomaterials and nanoparticles, accurate and reliable detection and measurement of MPs or nanoplastics and their characteristics are important to warrant a comprehensive understanding of their environmental and ecological impacts. This review elaborates the principles and applications of diverse analytical instruments or techniques for separation, characterization and quantification of MPs in the environment. The strength and weakness of different instrumental methods in separation, morphological, physical classification, chemical characterization and quantification for MPs are critically compared and analyzed. There is a demand for standardized experimental procedures and characterization analysis due to the complex transformation, cross-contamination and heterogeneous properties of MPs in size and chemical compositions. Moreover, this review highlights emerging and promising characterization techniques that may have been overlooked by research communities to study MPs. The future research efforts may need to develop and implement new analytical tools and combinations of hyphenated technologies to complement respective limitations of detection and yield reliable characterization information for MPs. The goal of this critical review is to facilitate the research of plastic particles and pollutants in the environment and understanding of their environmental and human health effects.

Size-Dependent Bacterial Toxicity of Hematite Particles

Submicron-sized iron oxide particles can influence the activity of bacteria, but the exact mechanisms of oxide toxicity toward bacteria remain elusive. By using atomic force microscopy (AFM), soft X-ray tomography (Nano-CT), and Fourier transform infrared (FTIR) spectrometry, we show how the size-dependent interfacial interactions between hematite particles and bacteria in the absence of any ligands contribute to the antimicrobial properties against Gram-positive and Gram-negative bacterial strains. We found that surface adhesion between hematite particles and bacterial cells is initially dominated by Lifshitz van der Waals and electrostatic forces. Subsequently, the rapid formation of P-O-Fe bonds occurs, followed by changes in the structures of membrane proteins in 2 h, resulting in the loss of the structural integrity of the membrane within 10 h. Thus, particles can migrate into the cells. After contact with bacterial cells, reactive oxygen species are generated on the surface of hematite particles, leading to cell permeabilization. G^- bacteria appear to be more susceptible to this process than G⁺ bacteria because the latter exhibit weaker adhesion forces toward hematite and benefit from the protective effects of the peptidoglycan layers. Our work revealed that hematite nanoparticles are more toxic to bacteria than microscaled particles due to their strong interfacial physicochemical interactions with the cells.

Harvesting of Chlorella vulgaris using Fe3O4 coated with modified plant polyphenol

The Chlorella vulgaris harvesting was explored by magnetic separation using Fe₃O₄ particles coated with the plant polyphenol chemically modified by a Mannich reaction followed by quaternization (Fe₃O₄@Q-PP). The -N(R)₄⁺ and Cl-N⁺-C perssad of the Q-PP were linked to the Fe₃O₄ particles by N-O bonds, as suggested by the X-ray photoelectron spectroscopy spectra. The thermogravimetric analysis displayed the mass percentage of the Q-PP coated on the Fe₃O₄ surface was close to ~ 5%. Compared with the naked Fe₃O₄ particles, zeta potentials of the Fe₃O₄@Q-PP particles were improved from the range of - 17.5~- 25.6 mV to 1.9~36.3 mV at pH 2.1~13.1. A 70.2 G coercive force was obtained for the Fe₃O₄@Q-PP composite, which demonstrated its ferromagnetic behavior. The use of Fe₃O₄@Q-PP resulted in a harvesting efficiency of 90.9% of C. vulgaris cells (3.06 g/L). The Fe₃O₄ particles could be detached from the cell flocs by ultrasonication leading to a recovery efficiency of 96.1% after 10 cycles. The recovered Fe₃O₄ could be re-coated with Q-PP and led to a harvesting efficiency of 80.2% after 10 cycles. The magnetic separation using Fe₃O₄@Q-PP included charge neutralization followed by bridging and then colloid entrapment.

Investigation of adhesive interactions in the specific targeting of Triptorelin-conjugated PEG-coated magnetite nanoparticles to breast cancer cells

The understanding of adhesive interaction at the nanoscale between functionalized nanoparticles and biological cells is of great importance to develop effective theranostic nanocarriers for targeted cancer therapy. Here, we report a combination of experimental and computational approaches to evaluate the adhesion between Triptorelin (a Luteinizing Hormone-Releasing Hormone (LHRH) agonist)-conjugated poly-(ethylene glycol) (PEG)-coated magnetite nanoparticles (Triptorelin-MNPs) and breast cells. The adhesion forces between Triptorelin-MNPs and normal/cancerous breast cells are obtained using atomic force microscopy. The corresponding work of adhesion is then estimated using Johnson-Kendall-Roberts model. Our results demonstrate that Triptorelin-MNPs have a fourteen-fold greater work of adhesion to breast cancer cells than to normal breast cells. In addition, the work of adhesion between Triptorelin-MNPs and breast cancer cells is found to be three times more than that between unmodified MNPs and breast cancer cells. Hence, the experimental observation indicates that Triptorelin ligands facilitate the specific targeting of breast cancer cells. Furthermore, molecular dynamics simulations are performed to investigate the molecular origins of the adhesive interactions. The simulations reveal that the interactions between molecules (e.g. Triptorelin and PEG) and LHRH receptors are dominated by van der Waals energies, while the interactions of these molecules with cell membrane are dominated by electrostatic interactions. Moreover, both experimental and computational results reveal that PEG serves as an effective coating that enhances adhesive interactions to breast cancer cells that over-express LHRH receptors, while reduces the adhesion to normal breast cells. Our results highlight the potential to develop Triptorelin-MNPs into tumor-specific MRI contrast agents and drug carriers.

STATEMENT OF SIGNIFICANCE

Systematic investigation of adhesive interactions between functionalized nanoparticles and cancer cells is of great importance in developing effective theranostic nanocarriers for targeted cancer therapy. Herein, we use a combination of atomic force microscopy technique and molecular dynamics simulations approach to explore the adhesive interactions at the nanoscale between Triptorelin-conjugated polyethylene glycol (PEG)-coated magnetite nanoparticles and normal/cancerous breast cells. This study characterizes and quantifies the work of adhesion, as well as adhesion forces, at the nanocarrier/cell interfaces, unravels the molecular origins of adhesive interactions and highlights the effectiveness of PEG coatings and Triptorelin ligands in the specific targeting of breast cancer cells. Our findings expand the fundamental understanding of nanoparticle/cell adhesion and provide guidelines for the design of more rational nanocarriers.

Measurement of the surface hydrophobicity of engineered nanoparticles using an atomic force microscope

A scanning probe method based on atomic force microscopy (AFM) was used to probe the nanoscale hydrophobicity of nanomaterials in liquid environments.

Visualizing and quantifying the nanoscale hydrophobicity and chemical distribution of surface modified polyethersulfone (PES) membranes

Chemical modifications bring unique properties into polymeric membranes that may have enhanced filtration or separation efficiencies, antifouling, antimicrobial activity and selectivity. However, there is a lack of nanoscale characterization of the chemical additive distribution and the impacts of chemical modifiers or additives on membrane surface properties, especially those at the nanoscale. In this study, a series of industrially relevant polyethersulfone (PES) membranes modified with poly (ethylene glycol) (PEG) and polyvinylpyrrolidone (PVP) were analysed systematically. Particularly, hydrophobicity and chemical distribution were scrutinized by atomic force microscopy (AFM) and AFM coupled with infrared analysis capability (AFM-IR) for the first time that successfully resolved nanoscale structural and chemical properties of the chemically modified PES membranes. Our results indicated the heterogeneous spatial distribution of PVP and PEG based on their characteristic IR bands and the resulting hydrophobicity distribution on modified membrane surfaces at the nanoscale. Particularly, we established a linear correlation (R² = 0.9449) between the measured adhesion force and water contact angles, which enabled the examination of local surface hydrophobicity. The PES membranes became more hydrophilic with the increasing blend of PVP and PEG. With AFM-IR, trace amounts (1-4%) of PVP could be identified sensitively on PES membranes based on their unique characteristic IR bands, which were not achieved by FTIR or IR mapping. Overall, these novel characterization approaches hold paramount importance for the design and quality control of polymer membrane modification and manufacturing.

Hybrid AFM for Nanoscale Physicochemical Characterization: Recent Development and Emerging Applications

Atomic force microscopy (AFM) has evolved to be one of the most powerful tools for the characterization of material surfaces especially at the nanoscale. Recent development of AFM has incorporated a suite of analytical techniques including surface-enhanced Raman scattering (SERS) technique and infrared (IR) spectroscopy to further reveal chemical composition and map the chemical distribution. This incorporation not only elevates the functionality of AFM but also increases the resolution limitation of conventional IR and Raman spectroscopy. Despite the rapid development of such hybrid AFM techniques, many unique features, principles, applications, potential pitfalls or artifacts are not well known to the community. This review systematically summarizes the recent relevant literature on hybrid AFM principles and applications. It focuses specially on AFM-IR and AFM-Raman techniques. Various applications in different research fields are critically reviewed and discussed, highlighting the potentials of these hybrid AFM techniques. Here, the major drawbacks and limitations of these two hybrid AFM techniques are presented. The intentions of this article are to shed new light on the future research and achieve improvements in stability and reliability of the measurements.

Probed adhesion force of living lung cells with a tip-modified atomic force microscope

The mechanical properties of the extracellular matrix play an important role in bio-microenvironment activities. Herein, atomic force microscope (AFM) was used to measure the interaction between Au and Ag nanoparticle (NP) clusters on the surface of human fetal lung cells. Using (3-mercapto-propyl) triethoxysilane (MPTMS), NP clusters were grafted onto the apex of AFM tip, and then, the adhesion force between the tip and the cell was analyzed. The measured adhesion force increased from 92 pN for AFM tip to 332 pN for that modified with MPTMS. The increase is most probably contributed by the nonspecific interactions between the apex of the modified AFM tip and the surface of the cells. The adhesion forces between the surface of NPs clusters grafted AFM tip and that of lung cells were dramatically reduced as NPs clusters were replaced by MPTMS. For the former, as the Au NPs cluster was applied, the adhesion force reached to 122 pN, whereas it significantly augmented with the addition of the cluster's size and dimension on the AFM tip. For the case of Ag cluster grafted on AFM tip, its adhesion force with the surface of the cells significantly lowered and reduced to 56 pN. Presumably, the electrostatic or van der Waals force between the two surfaces results in the variation of measurements. It is also very likely that the cell-surface interactions are probably varied by the nature of the contact surfaces, like the force-distance of attraction. The result is significant for understanding the the nature of the interactions between the surface of NPs and the membrane of lung cells.

Assessment of agglomeration, co-sedimentation and trophic transfer of titanium dioxide nanoparticles in a laboratory-scale predator-prey model system

Nano titanium dioxide (nTiO₂) is the most abundantly released engineered nanomaterial (ENM) in aquatic environments. Therefore, it is prudent to assess its fate and its effects on lower trophic-level organisms in the aquatic food chain. A predator-and-prey-based laboratory microcosm was established using Paramecium caudatum and Escherichia coli to evaluate the effects of nTiO₂. The surface interaction of nTiO₂ with E. coli significantly increased after the addition of Paramecium into the microcosm. This interaction favoured the hetero-agglomeration and co-sedimentation of nTiO₂. The extent of nTiO₂ agglomeration under experimental conditions was as follows: combined E. coli and Paramecium > Paramecium only > E. coli only > without E. coli or Paramecium. An increase in nTiO₂ internalisation in Paramecium cells was also observed in the presence or absence of E. coli cells. These interactions and nTiO₂ internalisation in Paramecium cells induced statistically significant (p < 0.05) effects on growth and the bacterial ingestion rate at 24 h. These findings provide new insights into the fate of nTiO₂ in the presence of bacterial-ciliate interactions in the aquatic environment.

A detailed guideline for the fabrication of single bacterial probes used for atomic force spectroscopy

The atomic force microscope (AFM) evolved as a standard device in modern microbiological research. However, its capability as a sophisticated force sensor is not used to its full capacity. The AFM turns into a unique tool for quantitative adhesion research in bacteriology by using "bacterial probes". Thereby, bacterial probes are AFM cantilevers that provide a single bacterium or a cluster of bacteria as the contact-forming object. We present a step-by-step protocol for preparing bacterial probes, performing force spectroscopy experiments and processing force spectroscopy data. Additionally, we provide a general insight into the field of bacterial cell force spectroscopy.

Heteroaggregation between PEI-coated magnetic nanoparticles and algae: effect of particle size on algal harvesting efficiency

Colloidal interactions between magnetic nanoparticles (NPs) and algal cells are of paramount significance to magnetophoretic separation of algal biomass from water. This study evaluated the size effect of magnetic NPs (MNPs) coated with polyethylenimine (PEI) on the separation efficiency of Scenedesmus dimorphus as well as on the recovery efficiency of MNPs from algal biomass. Results showed that algal harvesting efficiency (HE) increased from ca. 60% to 85% as the diameter of PEI-coated MNPs increased from 9 to 53 nm. Likewise, algal recovery capacity (algae/MNPs, w/w) also showed the same size dependence. But a large size (247 nm) led to a decline of algal HE, which was correctly interpreted by a settling model that predicts large sizes of MNPs could eventually reduce the settling velocity under magnetophoresis. The extended Derjaguin-Landau-Verwey-Overbeek theory revealed that the particle size and PEI coating both influenced the interaction energies (e.g., energy barrier) between MNPs and algae. Particularly, PEI coating significantly reduced the energy barrier between MNPs and algae and thereby increased their heteroaggregation and algal HE. Moreover, PEI-coated MNPs were recovered from the harvested algae biomass through a chemical-free ultrasonic method, and the recovery efficiency appeared to be higher for larger MNPs. Overall, the synthesized sizes of applied MNPs will not only affect algal HE but also have economic implications on magnetophoretic algal separation technologies.

Single-bacterium nanomechanics in biomedicine: unravelling the dynamics of bacterial cells

The use of the atomic force microscope (AFM) in microbiology has progressed significantly throughout the years since its first application as a high-resolution imaging instrument. Modern AFM setups are capable of characterizing the nanomechanical behaviour of bacterial cells at both the cellular and molecular levels, where elastic properties and adhesion forces of single bacterium cells can be examined under different experimental conditions. Considering that bacterial and biofilm-mediated infections continue to challenge the biomedical field, it is important to understand the biophysical events leading towards bacterial adhesion and colonization on both biological and non-biological substrates. The purpose of this review is to present the latest findings concerning the field of single-bacterium nanomechanics, and discuss future trends and applications of nanoindentation and single-cell force spectroscopy techniques in biomedicine.

D-amino acids inhibit initial bacterial adhesion: thermodynamic evidence

Bacterial biofilms are structured communities of cells enclosed in a self-produced hydrated polymeric matrix that can adhere to inert or living surfaces. D-Amino acids were previously identified as self-produced compounds that mediate biofilm disassembly by causing the release of the protein component of the polymeric matrix. However, whether exogenous D-amino acids could inhibit initial bacterial adhesion is still unknown. Here, the effect of the exogenous amino acid D-tyrosine on initial bacterial adhesion was determined by combined use of chemical analysis, force spectroscopic measurement, and theoretical predictions. The surface thermodynamic theory demonstrated that the total interaction energy increased with more D-tyrosine, and the contribution of Lewis acid-base interactions relative to the change in the total interaction energy was much greater than the overall nonspecific interactions. Finally, atomic force microscopy analysis implied that the hydrogen bond numbers and adhesion forces decreased with the increase in D-tyrosine concentrations. D-Tyrosine contributed to the repulsive nature of the cell and ultimately led to the inhibition of bacterial adhesion. This study provides a new way to regulate biofilm formation by manipulating the contents of D-amino acids in natural or engineered systems.

A concise review of nanoscopic aspects of bioleaching bacteria-mineral interactions

Bioleaching is a technology for the recovery of metals from minerals by means of microorganisms, which accelerate the oxidative dissolution of the mineral by regenerating ferric ions. Bioleaching processes take place at the interface of bacteria, sulfide mineral and leaching solution. The fundamental forces between a bioleaching bacterium and mineral surface are central to understanding the intricacies of interfacial phenomena, such as bacterial adhesion or detachment from minerals and the mineral dissolution. This review focuses on the current state of knowledge in the colloidal aspect of bacteria-mineral interactions, particularly for bioleaching bacteria. Special consideration is given to the microscopic structure of bacterial cells and the atomic force microscopy technique used in the quantification of fundamental interaction forces at nanoscale.

Differential natural organic matter fouling of ceramic versus polymeric ultrafiltration membranes

Ceramic ultrafiltration membranes has drawn increasing attention in drinking water treatment sectors as an alternative to traditional polymeric counterparts, yet only limited information has been made available about the characteristics of ceramic membrane fouling by natural organic matter. The effects of solution chemistry including ionic strength, divalent ion concentration and pH on the flux behavior were comparatively evaluated for ceramic and polymeric ultrafiltration of synthetic water containing model natural organic matter. Filtration characteristics were further probed via resistance-in-series model analysis, fouling visualization using quantum dots, batch adsorption test, contact angle measurement, solute-membrane surface adhesion force measurement, and quantitative comparison of fouling characteristics between ceramic and polymeric membranes. The results collectively suggested that the effects of solution chemistry on fouling behavior of ceramic membranes were generally similar to polymeric counterparts in terms of trends, while the extent varied significantly depending on water quality parameters. Lower fouling tendency and enhanced cleaning efficiency were observed with the ceramic membrane, further promoting the potential for ceramic membrane application to surface water treatment.

Fouling behavior of typical organic foulants in polyvinylidene fluoride ultrafiltration membranes: characterization from microforces

To further unravel the organic fouling behavior of polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes, the adhesion forces of membrane-foulant and foulant-foulant were investigated by atomic force microscopy (AFM) in conjunction with self-made PVDF colloidal probe and foulant-coated colloidal probe, respectively. Fouling experiments with bovine serum albumin, sodium alginate, humic acid, and secondary wastewater effluent organic matter (EfOM) were carried out with PVDF UF membrane. Results showed a positive correlation between the membrane-foulant adhesion force and the flux decline rate and extent in the initial filtration stage, whereas the foulant-foulant interaction force was closely related to the pseudostable flux and the cake layer structure in the later filtration stage. For each type of foulant used, the membrane-foulant adhesion force was much stronger than the foulant-foulant interaction force, and membrane flux decline mainly occurred in the earlier filtration stage indicating that elimination of the membrane-foulant interaction force is important for the control of membrane fouling. Upon considering the foulant-foulant interaction force and the membrane flux recovery rate of fouled membranes, it was evident that the main contributor to physically irreversible fouling is the foulant-foulant interaction force.

Surface interactions affect the toxicity of engineered metal oxide nanoparticles toward Paramecium

To better understand the potential impacts of engineered metal oxide nanoparticles (NPs) in the ecosystem, we investigated the acute toxicity of seven different types of engineered metal oxide NPs against Paramecium multimicronucleatum, a ciliated protozoan, using the 48 h LC(50) (lethal concentration, 50%) test. Our results showed that the 48 h LC(50) values of these NPs to Paramecium ranged from 0.81 (Fe(2)O(3) NPs) to 9269 mg/L (Al(2)O(3) NPs); their toxicity to Paramecium increased as follows: Al(2)O(3) < TiO(2) < CeO(2) < ZnO < SiO(2) < CuO < Fe(2)O(3) NPs. On the basis of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, interfacial interactions between NPs and cell membrane were evaluated, and the magnitude of interaction energy barrier correlated well with the 48 h LC(50) data of NPs to Paramecium; this implies that metal oxide NPs with strong association with the cell surface might induce more severe cytotoxicity in unicellular organisms.

Impacts of hematite nanoparticle exposure on biomechanical, adhesive, and surface electrical properties of Escherichia coli cells

Despite a wealth of studies examining the toxicity of engineered nanomaterials, current knowledge on their cytotoxic mechanisms (particularly from a physical perspective) remains limited. In this work, we imaged and quantitatively characterized the biomechanical (hardness and elasticity), adhesive, and surface electrical properties of Escherichia coli cells with and without exposure to hematite nanoparticles (NPs) in an effort to advance our understanding of the cytotoxic impacts of nanomaterials. Both scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that E. coli cells had noticeable deformation with hematite treatment for 45 min with a statistical significance. The hematite-treated cells became significantly harder or stiffer than untreated ones, as evidenced by indentation and spring constant measurements. The average indentation of the hematite-treated E. coli cells was 120 nm, which is significantly lower (P < 0.01) than that of the untreated cells (approximately 400 nm). The spring constant of hematite-treated E. coli cells (0.28 ± 0.11 nN/nm) was about 20 times higher than that of untreated ones (0.01 ± 0.01 nN/nm). The zeta potential of E. coli cells, measured by dynamic light scattering (DLS), was shown to shift from -4 ± 2 mV to -27 ± 8 mV with progressive surface adsorption of hematite NPs, a finding which is consistent with the local surface potential measured by Kelvin probe force microscopy (KPFM). Overall, the reported findings quantitatively revealed the adverse impacts of nanomaterial exposure on physical properties of bacterial cells and should provide insight into the toxicity mechanisms of nanomaterials.

Fate and biological effects of silver, titanium dioxide, and C60 (fullerene) nanomaterials during simulated wastewater treatment processes

As engineered nanomaterials (NMs) become used in industry and commerce their loading to sewage will increase. In this research, sequencing batch reactors (SBRs) were operated with hydraulic (HRT) and sludge (SRT) retention times representative of full-scale biological WWTPs for several weeks. Under environmentally relevant NM loadings and biomass concentrations, NMs had negligible effects on ability of the wastewater bacteria to biodegrade organic material, as measured by chemical oxygen demand (COD). Carboxy-terminated polymer coated silver nanoparticles (fn-Ag) were removed less effectively (88% removal) than hydroxylated fullerenes (fullerols; >90% removal), nano TiO(2) (>95% removal) or aqueous fullerenes (nC(60); >95% removal). Experiments conducted over 4 months with daily loadings of nC(60) showed that nC(60) removal from solution depends on the biomass concentration. Under conditions representative of most suspended growth biological WWTPs (e.g., activated sludge), most of the NMs will accumulate in biosolids rather than in liquid effluent discharged to surface waters. Significant fractions of fn-Ag were associated with colloidal material which suggests that efficient particle separation processes (sedimentation or filtration) could further improve removal of NM from effluent.

Size effects on adsorption of hematite nanoparticles on E. coli cells

Adsorption of engineered nanoparticles (NPs) onto bacterial cells is critical for quantifying nanobio interactions as well as toxicokinetic properties of NPs. The purpose of this work was to study adsorption of hematite (α-Fe(2)O(3)) NPs onto Escherichia coli cells and to determine the particle size effects on the adsorption kinetics. Adsorption of large NPs (76 and 98 nm) on cells reached equilibrium faster (within 30-40 min) than small NPs (approximately 60-90 min). The adsorption rates in mg Fe/(L · s) decreased in the order of 98 nm > 76 nm > 53 nm > 26 nm. However, adsorption rates expressed as the number of adsorbed hematite NPs per unit cell surface area in #/(m2 · s) were faster for small NPs than those for large NPs. To interpret the size effects on adsorption kinetics, the Extended Derjaguin-Landau-Verwey-Overbeek (EDLVO) theory was combined with interfacial force boundary layer (IFBL) theory. The computed adsorption rates for different sizes had excellent agreement with the experimental data, and they explained that that faster kinetics for smaller NPs could be attributed to faster particle mobility and lower energy barriers in the total interaction energy. This study lays the groundwork for quantifying the kinetic behavior of NPs interacting with microbial cells, and the results provide insight into adsorption processes at the nanoscale.