Physicochemical properties of nevirapine-loaded solid lipid nanoparticles and nanostructured lipid carriers

Comprehensive insights into herbal P-glycoprotein inhibitors and nanoformulations for improving anti-retroviral therapy efficacy

The worldwide HIV cases were 39.0 million (33.1-45.7 million) in 2022. Due to genetic variations, HIV-1 is more easily transmitted than HIV-2 and favours CD4 + T cells and macrophages, producing AIDS. Conventional HIV drug therapy has many drawbacks, including adherence issues leading to resistance, side effects that lower life quality, drug interactions, high costs limiting global access, inability to eliminate viral reservoirs, chronicity requiring lifelong treatment, emerging toxicities, and a focus on managing infections. Conventional dosage forms have bioavailability issues due to intestinal P-glycoprotein (P-gp) efflux, which can reduce anti-retroviral drug efficacy and lead to resistance. Use of phyto-constituents with P-gp regulating actions has great benefits for semi-synthetic modification to create formulations with greater bioavailability and reduced toxicity, which improves drug effectiveness. Lipid-based nanocarriers, solid lipid nanoparticles, nanostructured lipid carriers, polymer-based nanocarriers, and inorganic nanoparticles may inhibit P-gp efflux. Employing potent P-gp inhibitors within nanocarriers as a Trojan horse approach can enhance the intracellular accumulation of anti-retroviral drugs (ARDs), which are substrates for efflux transporters. This technique increases oral bioavailability and offers lower-dose options, boosting HIV patient compliance and lowering costs. Molecular docking of the inhibitor with P-gp may anticipate optimum binding and function, allowing drug efflux to be minimised.

Potential of electro-sprayed purified mangiferin nanoparticles for anti-aging cosmetic applications

The fabrication of mangiferin nanoparticles using an electrospraying technique is a new and promising method for developing nanoparticles with higher efficiency and safety. This study aimed to fabricate mangiferin nanoparticles (MNPs) using cellulose acetate (CA) as a polymer at various parameters using electrospraying. Commercial mangiferin (CM) was purified from 88.46 to 95.71% by a recrystallization method to improve its purity and biological activities and remove any residue. The properties of recrystallized mangiferin (RM) were characterized using DSC, FTIR, X-ray diffraction (XRD) and HPLC. Then its biological activity and proteomics were determined. Proteomics analysis of RM showed that up-regulated proteins were involved in more biological processes than CM. MNPs were fabricated by varying the electrospraying parameters including voltage, the distance between the needle-tip-collector and flow rate. Skin permeation, release and irritation were also evaluated. The results revealed that the average particle size of the MNPs ranged between 295.47 ± 5.58 and 448.87 ± 3.00 nm, and had a smooth spherical morphology in SEM images. The MNPs also showed good potential in antioxidant and anti-aging properties. The encapsulation efficiency of MNPs was determined to be 85.31%. From skin permeation studies of CM, RM, and MNPs, the mangiferin content was found in the stratum corneum and dermis skin layers. Moreover, the MNPs solution had 23.68 ± 0.27% and 11.98 ± 0.13% of mangiferin in the stratum corneum and viable epidermis and dermis, respectively. Additionally, the irritation test by HET-CAM was mild and safe. Therefore, MNPs produced by electrospraying are a promising delivery system for cosmetic/cosmeceutical applications.

Lipid-Based Nanoparticles for Drug/Gene Delivery: An Overview of the Production Techniques and Difficulties Encountered in Their Industrial Development

Over the past decade, the therapeutic potential of nanomaterials as novel drug delivery systems complementing conventional pharmacology has been widely acknowledged. Among these nanomaterials, lipid-based nanoparticles (LNPs) have shown remarkable pharmacological performance and promising therapeutic outcomes, thus gaining substantial interest in preclinical and clinical research. In this review, we introduce the main types of LNPs used in drug formulations such as liposomes, nanoemulsions, solid lipid nanoparticles, nanostructured lipid carriers, and lipid polymer hybrid nanoparticles, focusing on their main physicochemical properties and therapeutic potential. We discuss computational studies and modeling techniques to enhance the understanding of how LNPs interact with therapeutic cargo and to predict the potential effectiveness of such interactions in therapeutic applications. We also analyze the benefits and drawbacks of various LNP production techniques such as nanoprecipitation, emulsification, evaporation, thin film hydration, microfluidic-based methods, and an impingement jet mixer. Additionally, we discuss the major challenges associated with industrial development, including stability and sterilization, storage, regulatory compliance, reproducibility, and quality control. Overcoming these challenges and facilitating regulatory compliance represent the key steps toward LNP's successful commercialization and translation into clinical settings.

Chitosan-Coated SLN: A Potential System for Ocular Delivery of Metronidazole

Ophthalmic drops for ocular delivery exhibit inadequate residence time, which often requires multiple daily dosing that may result in patient non-adherence. In this study, the development of a once-daily-dosed chitosan-coated metronidazole (MTZ)-loaded solid lipid nanoparticles (SLNs) for ocular delivery was undertaken. Melt emulsification and ultrasonication were used to manufacture MTZ-loaded SLN, which were subsequently coated with chitosan (CS) by mechanical stirring using a 0.1% w/v solution. Gelucire^® 48/16 and Transcutol^® HP were used as the solid lipid and synthetic solvent, respectively, with Tween^® 20 included as a stabilizing agent. The critical quality attributes (CQA) of the optimized CS-coated SLN that was monitored included particle size, polydispersity index, Zeta potential, % entrapment efficiency, % MTZ loading, pH, and osmolarity. The optimized coated nanocarriers were evaluated using laser Doppler anemometry (LDA) and were determined to be stable, with particle sizes in the nanometre range. In vitro mucoadhesion, MTZ release and short-term stability, in addition to the determination of the shape of the optimized CS-coated SLN, were undertaken. The mucoadhesive properties of the optimized CS-coated MTZ-loaded SLN demonstrated increased ocular availability, which may allow dose reduction or longer intervals between doses by improving precorneal retention and ocular availability. Overall, our findings suggest that CS-coated MTZ-loaded SLNs have the potential for clinical application, to enhance ocular delivery through the release of MTZ.

Pt(II)-PLGA Hybrid in a pH-Responsive Nanoparticle System Targeting Ovarian Cancer

Platinum-based agents are the main treatment option in ovarian cancer (OC). Herein, we report a poly(lactic-co-glycolic acid) (PLGA) nanoparticle (NP) encapsulating platinum (II), which is targeted to a cell-spanning protein overexpressed in above 90% of late-stage OC, mucin 1 (MUC1). The NP is coated with phospholipid-DNA aptamers against MUC1 and a pH-sensitive PEG derivative containing an acid-labile hydrazone linkage. The pH-sensitive PEG serves as an off-on switch that provides shielding effects at the physiological pH and is shed at lower pH, thus exposing the MUC1 ligands. The pH-MUC1-Pt NPs are stable in the serum and display pH-dependent PEG cleavage and drug release. Moreover, the NPs effectively internalize in OC cells with higher accumulation at lower pH. The Pt (II) loading into the NP was accomplished via PLGA-Pt (II) coordination chemistry and was found to be 1.62 wt.%. In vitro screening using a panel of OC cell lines revealed that pH-MUC1-Pt NP has a greater effect in reducing cellular viability than carboplatin, a clinically relevant drug analogue. Biodistribution studies have demonstrated NP accumulation at tumor sites with effective Pt (II) delivery. Together, these results demonstrate a potential for pH-MUC1-Pt NP for the enhanced Pt (II) therapy of OC and other solid tumors currently treated with platinum agents.

Nano-Encapsulated Antioxidant: Retinoic Acid as a Natural Mucosal Adjuvant for Intranasal Immunization against Chronic Experimental Toxoplasmosis

The tight relationship between immunity and retinoid levels provides evidence on the critical role of retinoic acid (RA) in regulating immune activity, especially the mucosal one. Mucosal immune response is the key for determination of the outcome of infection, particularly against intracellular mucosal pathogens such as Toxoplasma gondii, where it plays a crucial role as a sentinel against parasite invasion. Herein, the immunomodulatory adjuvant role of RA was evaluated for prophylactic vaccination against chronic Toxoplasma infection. A quantity of 15 µg of RA pre-encapsulated with lipid-based nanoparticles (SLNs) was intranasally used in three doses, two weeks apart, as an adjuvant to the Toxoplasma lysate antigen (TLA). Afterward, mice were infected with 20 cysts of T. gondii (ME49 strain) and were sacrificed at the 4th week post-infection. Parasitological, immunological, biochemical, and histopathological studies were applied as vaccine efficacy measures. The protective role of the tested vaccine was noted using the statistically marked reduction in brain cyst count, accompanied by remarkable levels of protective IFN-γ and antibodies, with amelioration of infection-induced oxidative stress and brain pathology. Ultimately, this experiment outlined the prospective role of a novel, natural, nano-encapsulated and mucosal vaccine adjuvant RA-SLNs as a propitious candidate against chronic toxoplasmosis.

Nano-Encapsulated Melatonin: A Promising Mucosal Adjuvant in Intranasal Immunization against Chronic Experimental T. gondii Infection

Melatonin (MLT) is now emerging as one of the universally accepted immunostimulators with broad applications in medicine. It is a biological manipulator of the immune system, including mucosal ones. MLT was encapsulated in solid lipid nanoparticles (SLNs), then 100 mg/kg/dose of MLT-SLNs was used as an adjuvant of Toxoplasma lysate antigen (TLA). Experimental mice were intra-nasally inoculated with three doses of different regimens every two weeks, then challenged with 20 cysts of T. gondii Me49 strain, where they were sacrificed four weeks post-infection. Protective vaccine efficacy was evident via the significant brain cyst count reduction of 58.6%, together with remarkably high levels of humoral systemic and mucosal anti-Toxoplasma antibodies (Ig G, Ig A), supported by a reduced tachyzoites invasion of Vero cells in vitro upon incubation with sera obtained from these vaccinated mice. A cellular immune response was evident through the induction of significant levels of interferon-gamma (IFN γ), associated with morphological deteriorations of cysts harvested from the brains of vaccinated mice. Furthermore, the amelioration of infection-induced oxidative stress (OS) and histopathological changes were evident in mice immunized with TLA/MLT-SLNs. In conclusion, the present study highlighted the promising role of intranasal MLT-SLNs as a novel mucosal adjuvant candidate against chronic toxoplasmosis.

Current Advances in Specialised Niosomal Drug Delivery: Manufacture, Characterization and Drug Delivery Applications

Development of nanomaterials for drug delivery has received considerable attention due to their potential for achieving on-target delivery to the diseased area while the surrounding healthy tissue is spared. Safe and efficiently delivered payloads have always been a challenge in pharmaceutics. Niosomes are self-assembled vesicular nanocarriers formed by hydration of a non-ionic surfactant, cholesterol or other molecules that combine to form a versatile drug delivery system with a variety of applications ranging from topical delivery to targeted delivery. Niosomes have advantages similar to those of liposomes with regards to their ability to incorporate both hydrophilic and hydrophobic payloads. Moreover, niosomes have simple manufacturing methods, low production cost and exhibit extended stability, consequently overcoming the major drawbacks associated with liposomes. This review provides a comprehensive summary of niosomal research to date, including the types of niosomes and critical material attributes (CMA) and critical process parameters (CPP) of niosomes and their effects on the critical quality attributes (CQA) of the technology. Furthermore, physical characterisation techniques of niosomes are provided. The review then highlights recent applications of specialised niosomes in drug delivery. Finally, limitations and prospects for this technology are discussed.

Novel Nanotechnology-Based Approaches for Targeting HIV Reservoirs

Highly active anti-retroviral therapy (HAART) is prescribed for HIV infection and, to a certain extent, limits the infection’s spread. However, it cannot completely eradicate the latent virus in remote and cellular reservoir areas, and due to the complex nature of the infection, the total eradication of HIV is difficult to achieve. Furthermore, monotherapy and multiple therapies are not of much help. Hence, there is a dire need for novel drug delivery strategies that may improve efficacy, decrease side effects, reduce dosing frequency, and improve patient adherence to therapy. Such a novel strategy could help to target the reservoir sites and eradicate HIV from different biological sanctuaries. In the current review, we have described HIV pathogenesis, the mechanism of HIV replication, and different biological reservoir sites to better understand the underlying mechanisms of HIV spread. Further, the review deliberates on the challenges faced by the current conventional drug delivery systems and introduces some novel drug delivery strategies that have been explored to overcome conventional drug delivery limitations. In addition, the review also summarizes several nanotechnology-based approaches that are being explored to resolve the challenges of HIV treatment by the virtue of delivering a variety of anti-HIV agents, either as combination therapies or by actively targeting HIV reservoir sites.

Recent updates on applications of Lipid-based nanoparticles for site-specific drug delivery

BACKGROUND

Site-specific drug delivery is a widespread and demanding area nowadays. Lipid-based nanoparticulate drug delivery systems have shown promising effects for targeting drugs among lymphatic systems, brain tissues, lungs, and skin. Recently, lipid nanoparticles are used for targeting the brain via the mucosal route for local therapeutic effects. Lipid nanoparticles (LNPs) can help in enhancing the efficacy and lowering the toxicities of anticancer drugs to treat the tumors, particularly in lymph after metastases of tumors. LNPs contain a non-polar core that can improve the absorption of lipophilic drugs into the lymph node and treat tumors. Cellular uptake of drugs can also be enhanced using LNPs and therefore, LNPs are the ideal carrier for treating intracellular infections such as leishmaniasis, tuberculosis and parasitic infection in the brain, etc. Furthermore, specific surface modifications with molecules like mannose, or PEG could improve the macrophage uptake and hence effectively eradicate parasites hiding in macrophages.

METHOD

An electronic literature search was conducted to update the advancements in the field of site-specific drug delivery utilizing lipid-based nanoparticles. A search of the Scopus database (https://www.scopus.com/home.uri) was conducted using the following keywords: lipid-based nanoparticles; site specific delivery.

CONCLUSION

Solid lipid nanoparticles have shown site-specific targeted delivery to various organs including the liver, oral mucosa, brain, epidermis, pulmonary and lymphatic systems. These lipid-based systems showed improved bioavailability as well as reduced side effects. Therefore, the focus of this article is to review the recent research studies on LNPs for site-specific or targeting drug delivery.

Eco-friendly synthesis of phthalate angico gum towards nanoparticles engineering using Quality by Design (QbD) approach

We developed a new hydrophobic polymer based on angico gum (AG), and we produced new nanoparticles to expand the applications of natural polysaccharides in nanomedicine. Phthalate angico gum (PAG) was characterized by ¹H NMR, FTIR, elementary analysis, solubility, XRD, and TG. PAG was a hydrophobic and semi-crystalline material, a relevant characteristic for drug delivery system applications. As a proof of concept, nevirapine (NVP) was selected for nanoparticles development. Plackett-Burman's experimental design was used to understand the influence of several factors in nanoparticles production. PAG proved to be a versatile material for producing nanoparticles with different characteristics. Optimized nanoparticles were produced using desirability parameters. NVP-loaded PAG nanoparticles formulation showed 202.1 nm of particle size, 0.23 of PDI, -17.1 of zeta potential, 69.8 of encapsulation efficiency, and promoted modified drug release for 8 h. Here we show that PAG presents as a promising biopolymer for drug delivery systems.

Advances and challenges in nintedanib drug delivery

INTRODUCTION

Nintedanib (N.T.B) is an orally administered tyrosine kinase inhibitor that has been approved recently by U.S.F.D.A for idiopathic pulmonary fibrosis (I.P.F) and systemic sclerosis-associated interstitial lung disease (S.Sc-I.L.D). N.T.B is also prescribed in COVID-19 patients associated with I.P.F. However, it has an extremely low bioavailability of around 4.7%, and hence, researchers are attempting to address this drawback by different approaches.

AREAS COVERED

This review article focuses on enlisting all the formulation attempts explored by researchers to increase the bioavailability of N.T.B while also providing meaningful insight into the unexplored areas in formulation development, such as targeting of the lymphatic system and transdermal delivery. All the patents on the formulation development of N.T.B have also been summarized.

EXPERT OPINION

N.T.B has the potential to act on multiple diseases that are still being discovered, but its extremely low bioavailability is a challenge that is to be dealt with for obtaining the full benefit. Few studies have been performed aiming at improving the bioavailability, but there are unexplored areas that can be used, a few of which are explained in this article. However, the ability to reproduce laboratory results when scaling up to the industry level is the only factor to be taken into consideration.

Lipid Nanocarriers for Anti-HIV Therapeutics: A Focus on Physicochemical Properties and Biotechnological Advances

Since HIV was first identified, and in a relatively short period of time, AIDS has become one of the most devastating infectious diseases of the 21st century. Classical antiretroviral therapies were a major step forward in disease treatment options, significantly improving the survival rates of HIV-infected individuals. Even though these therapies have greatly improved HIV clinical outcomes, antiretrovirals (ARV) feature biopharmaceutic and pharmacokinetic problems such as poor aqueous solubility, short half-life, and poor penetration into HIV reservoir sites, which contribute to the suboptimal efficacy of these regimens. To overcome some of these issues, novel nanotechnology-based strategies for ARV delivery towards HIV viral reservoirs have been proposed. The current review is focused on the benefits of using lipid-based nanocarriers for tuning the physicochemical properties of ARV to overcome biological barriers upon administration. Furthermore, a correlation between these properties and the potential therapeutic outcomes has been established. Biotechnological advancements using lipid nanocarriers for RNA interference (RNAi) delivery for the treatment of HIV infections were also discussed.

Dual loaded nanostructured lipid carrier of nano-selenium and Etravirine as a potential anti-HIV therapy

There is a dire need for dual-long-acting therapy that could simultaneously target different stages of the HIV life cycle and providing a dual-prolonged strategy for improved anti-HIV therapy while reducing oxidative stress associated with the prolonged treatment. Thus, in the present work, nanostructured lipid carriers of Etravirine were developed and modified with nano-selenium. The dual-loaded nanocarrier system was fabricated using the double emulsion solvent evaporation method, further screened and optimized using the design of experiments methodology. The spherical core-shell type of a system was confirmed with an electron microscope and small-angle neutron scattering, while XPS confirmed the presence of selenium at the core-shell of the nanocarrier. In vitro assessment against HIV1 (R5 and X4 strains) infected TZM-bl cells exhibited higher efficacy for the dual-loaded nanocarrier system than the plain drug, which could be attributed to the synergistic effect of the nano-selenium. Confocal microscopy and flow cytometry results exhibited enhanced uptake in TZM-bl cells compared to plain drug. A significant increase of GSH, SOD, CAT was observed in animals administered with the dual-loaded nanocarrier system containing nano-selenium, suggesting the protective potential of the lipidic nanoparticle containing the nano-selenium. Improvement in the in vivo pharmacokinetic parameters was also observed, along with a higher accumulation of the dual-loaded nanocarrier in remote HIV reservoir organs like the brain, ovary, and lymph node. The results suggest the potential of a dual-loaded formulation for synergistically targeting the HIV1 infection while simultaneously improving the intracellular anti-oxidant balance for improving a prolonged anti-HIV therapy.

A novel layered double hydroxide-hesperidin nanoparticles exert antidiabetic, antioxidant and anti-inflammatory effects in rats with diabetes

BACKGROUND

Incidence of diabetes has increased significantly worldwide over recent decades. Our objective was to prepare and characterize a novel nano-carrier of hesperidin to achieve a sustained release of hesperidin and to explore the potency of the novel formula as an antidiabetic agent compared to metformin in type 2 diabetic rats.

METHODS

Hesperidin was loaded on MgAl-layered double hydroxide (LDH). The formula was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), transmission electron microscopy, and dynamic light scattering. The release profile of hesperidin and MgAl-LDH-Hesperidin were studied in vitro. The parameters studied in vivo were blood glucose, glycated hemoglobin (HbA1c), insulin, lipid profile, and liver glycogen levels. We also investigated the levels of interleukin (IL)-17, tumor necrosis factor-Alfa (TNF-α), malondialdehyde (MDA), catalase, and the mRNA expression of peroxisome proliferator-activated receptor-gamma (PPARγ) and nuclear factor erythroid 2-related factor-2 (NrF2).

RESULTS

There were variations in the XRD patterns and FTIR confirming the physical adsorption of hesperidin on the surface of LDH. The results indicated that the diabetic rats treated with administration of antidiabetic formula, MgAl-LDH-Hesperidin, showed a beneficial effect on the levels of blood glucose, insulin, HbA1c%, and lipid profile, comparing to diabetic control rats. The antidiabetic agent also showed a significant decrease in the levels of TNF-α, IL-17, and MDA, and an increase in the level of catalase. Marked upregulation of the expression levels of mRNA for PPARγ and NrF2 were recorded.

CONCLUSION

The novel nano-hesperidin formula MgAl-LDH-Hesperidin revealed a sustained release of hesperidin and exhibited antidiabetic, antihyperlipidemic, antioxidant, and anti-inflammatory properties, and also is a promising agent for effective delivery of drugs to treat type 2 diabetes.

Multi-organ targeting of HIV-1 viral reservoirs with etravirine loaded nanostructured lipid carrier: An in-vivo proof of concept

The inadequate bioavailability and toxicity potential of antiretroviral therapy limit their effectiveness in the complete eradication of HIV from viral reservoirs. The penetration of these drugs into the brain is challenging because of the unfavorable physicochemical properties required to cross the membranes, limiting the transport of the drugs. Thus, in the current study, the authors report a nanocarrier-based drug delivery of a highly hydrophobic drug to overcome the existing limitations of the conventional therapies. An explicitly simple approach was used to overcome the limitations of existing anti-HIV therapies. The monophasic hot homogenized solution of lipid, drug, and solubilizer was diluted with the predetermined hot surfactant solution followed by the ultrasonication to generate the polydisperse nanoparticles with the size range of 50-1000 nm. The anti-HIV1 potential of nanostructured lipid carriers of Etravirine on HIV-infected cell lines showed efficacy with an appreciable increase in the therapeutic index as compared with the plain drug. Further, the results obtained from confocal microscopy along with flow cytometry exhibited efficient uptake of the nanocarrier loaded with coumarin-6 in cells. The pharmacokinetics of Etravirine nanostructured carriers was significantly better in all aspects compared to the plain drug solution, which could be attributed to molecular dispersion in the lipid matrix of the nanocarrier. A significant enhancement of Etravirine concentration of several-fold was also observed in the liver, ovary, lymph node, and brain, respectively, as compared to plain drug solution when assessed by biodistribution studies in rats. In conclusion, ETR-NLC systems could serve as a promising approach for simultaneous multi-site targeting and could provide therapeutic benefits for the efficient eradication of HIV/AIDS infections.

Nanotechnology-based antiviral therapeutics

The host immune system is highly compromised in case of viral infections and relapses are very common. The capacity of the virus to destroy the host cell by liberating its own DNA or RNA and replicating inside the host cell poses challenges in the development of antiviral therapeutics. In recent years, many new technologies have been explored for diagnosis, prevention, and treatment of viral infections. Nanotechnology has emerged as one of the most promising technologies on account of its ability to deal with viral diseases in an effective manner, addressing the limitations of traditional antiviral medicines. It has not only helped us to overcome problems related to solubility and toxicity of drugs, but also imparted unique properties to drugs, which in turn has increased their potency and selectivity toward viral cells against the host cells. The initial part of the paper focuses on some important proteins of influenza, Ebola, HIV, herpes, Zika, dengue, and corona virus and those of the host cells important for their entry and replication into the host cells. This is followed by different types of nanomaterials which have served as delivery vehicles for the antiviral drugs. It includes various lipid-based, polymer-based, lipid-polymer hybrid-based, carbon-based, inorganic metal-based, surface-modified, and stimuli-sensitive nanomaterials and their application in antiviral therapeutics. The authors also highlight newer promising treatment approaches like nanotraps, nanorobots, nanobubbles, nanofibers, nanodiamonds, nanovaccines, and mathematical modeling for the future. The paper has been updated with the recent developments in nanotechnology-based approaches in view of the ongoing pandemic of COVID-19.Graphical abstract.

Lipid Nanoparticles as Carriers for Bioactive Delivery

Nanotechnology has made a great impact on the pharmaceutical, biotechnology, food, and cosmetics industries. More than 40% of the approved drugs are lipophilic and have poor solubility. This is the major rate-limiting step that influences the release profile and bioavailability of drugs. Several approaches have been reported to administer lipophilic drugs with improved solubility and bioavailability. Nanotechnology plays a crucial role in the targeted delivery of poorly soluble drugs. Nanotechnology-based drug delivery systems can be classified as solid lipid nanoparticulate drug delivery systems, emulsion-based nanodrug delivery systems, vesicular drug delivery systems, etc. Nanotechnology presents a new frontier in research and development to conquer the limitations coupled with the conventional drug delivery systems through the formation of specific functionalized particles. This review presents a bird's eye view on various aspects of lipid nanoparticles as carriers of bioactive molecules that is, synthesis, characterization, advantage, disadvantage, toxicity, and application in the medical field. Update on recent development in terms of patents and clinical trials of solid lipid nanoparticles (SLNs) and nanostructure lipid carriers (NLCs) have also been discussed in this article.

Poloxamer Modified Chitosan Nanoparticles for Vaginal Delivery of Acyclovir

OBJECTIVE

The aim of the present study was to design a surface modified chitosan nanoparticle system for vaginal delivery of acyclovir for effective drug uptake into vaginal mucosa.

METHODS

Acyclovir-loaded chitosan nanoparticles, with and without modification by poloxamer 407, were prepared by ionic gelation method. The effects of two independent variables, chitosan to sodium tripolyphosphate mass ratio (X1) and acyclovir concentration (X2), on drug entrapment in nanoparticles were studied using 32 full factorial design. The surface response and counterplots were drawn to facilitate an understanding of the contribution of the variables and their interaction. The nanoparticles were evaluated for drug entrapment, size with zeta potential, morphological analysis by TEM, solid-state characterization by FTIR, DSC, XRD, in vitro dissolution, in vitro cell uptake using HeLa cell line and in vivo vaginal irritation test in Wistar rats.

RESULTS

Chitosan nanoparticle formulation with chitosan to sodium tripolyphosphate mass ratio of 2:1 and acyclovir concentration of 2 mg/mL resulted in the highest entrapment efficiency. The resulting nanoparticles revealed spherical morphology with a particle size of 191.2 nm. The surface modification of nanoparticles with poloxamer resulted in higher drug entrapment (74.3±1.5%), higher particle size (391.1 nm) as a result of dense surface coating, lower zeta potential and sustained drug release compared to unmodified nanoparticles. The change in the crystallinity of the drug during nanoparticle formulation was observed in DSC and XRD study. Cellular uptake of poloxamer-modified chitosan nanoparticles was found to be higher than chitosan nanoparticles in HeLa cells. Safety of nanoparticle formulations by vaginal route was evident when tested in female rats.

CONCLUSION

Conclusively, poloxamer-modified CH NP could serve as a promising and safe delivery system with enhanced cellular drug uptake.

Allopurinol Loaded Transferosomes for the Alleviation of Symptomatic After-effects of Gout: An Account of Pharmaceutical Implications

Background:

The present study assessed the transdermal potential of transferosomes loaded with allopurinol for the treatment of gout.

Methods:

Transferosomes of allopurinol were composed of different ratios of tween-80, soya lecithin and solvent using a thin-film hydration method. Transferosomes were characterized for Scanning Electron Microscopy (SEM), zeta potential, % entrapment efficiency (%EE), Fourier Transform Infrared Spectroscopy (FTIR), in-vitro drug release and kinetics as well as stability. Then, optimized formulation was incorporated in gel and evaluated for viscosity, pH, extrudability, homogeneity, skin irritation study, spreadability, ex vivo skin permeation study, flux, and stability.

Results:

SEM studies suggested that vesicles were spherical and zeta potential were in the range of -11.4 mV to -29.6 mV and %EE was 52.4- 83.87%. FTIR study revealed that there was no interaction between allopurinol and excipients during the preparation of transferosomes. The cumulative percentage of drug release from various transferosomes was ranged from 51.87 to 81.87%. A transferosomal gel of F8 formulation was prepared using dispersion method reported pseudoplastic rheological behavior, optimum pH, spreadability and maximum drug permeation i.e. 79.84% with flux 13.06 g/cm2/hr, followed zero-order release kinetics. Irritation and in-vivo studies of optimized transferosomal gel G8 on rabbits revealed better results than the standard allopurinol.

Conclusion:

This research suggested that allopurinol loaded transferosomal gel can be potentially used as a transdermal drug delivery system for the treatment of gout.

A brief review on solid lipid nanoparticles: part and parcel of contemporary drug delivery systems

Drug delivery technology has a wide spectrum, which is continuously being upgraded at a stupendous speed. Different fabricated nanoparticles and drugs possessing low solubility and poor pharmacokinetic profiles are the two major substances extensively delivered to target sites. Among the colloidal carriers, nanolipid dispersions (liposomes, deformable liposomes, virosomes, ethosomes, and solid lipid nanoparticles) are ideal delivery systems with the advantages of biodegradation and nontoxicity. Among them, nano-structured lipid carriers and solid lipid nanoparticles (SLNs) are dominant, which can be modified to exhibit various advantages, compared to liposomes and polymeric nanoparticles. Nano-structured lipid carriers and SLNs are non-biotoxic since they are biodegradable. Besides, they are highly stable. Their (nano-structured lipid carriers and SLNs) morphology, structural characteristics, ingredients used for preparation, techniques for their production, and characterization using various methods are discussed in this review. Also, although nano-structured lipid carriers and SLNs are based on lipids and surfactants, the effect of these two matrixes to build excipients is also discussed together with their pharmacological significance with novel theranostic approaches, stability and storage.

Short Term Stability Testing of Efavirenz-Loaded Solid Lipid Nanoparticle (SLN) and Nanostructured Lipid Carrier (NLC) Dispersions

The short term stability of efavirenz-loaded solid lipid nanoparticle and nanostructured lipid carrier dispersions was investigated. Hot High Pressure Homogenization with the capability for scale up production was successfully used to manufacture the nanocarriers without the use of toxic organic solvents for the first time. Glyceryl monostearate and Transcutol^® HP were used as the solid and liquid lipids. Tween^® 80 was used to stabilize the lipid nanocarriers. A Box-Behnken Design was used to identify the optimum operating and production conditions viz., 1100 bar for 3 cycles for the solid lipid nanoparticles and 1500 bar for 5 cycles for nanostructured lipid carriers. The optimized nanocarriers were predicted to exhibit 10% efavirenz loading with 3% and 4% Tween^® 80 for solid lipid nanoparticles and nanostructured lipid carriers, respectively. Characterization of the optimized solid lipid nanoparticle and nanostructured lipid carrier formulations in relation to shape, surface morphology, polymorphism, crystallinity and compatibility revealed stable formulations with particle sizes in the nanometer range had been produced. The nanocarriers had excellent efavirenz loading with the encapsulation efficiency >90%. The optimized nanocarriers exhibited biphasic in vitro release patterns with an initial burst release during the initial 0-3 h followed by sustained release over a 24 h period The colloidal systems showed excellent stability in terms of Zeta potential, particle size, polydispersity index and encapsulation efficiency when stored for 8 weeks at 25 °C/60% RH in comparison to when stored at 40 °C/75% RH. The formulations manufactured using the optimized conditions and composition proved to be physically stable as aqueous dispersions.

In Vitro Release Test of Nano-drug Delivery Systems Based on Analytical and Technological Perspectives

Background:

Nanotech products are gaining more attention depending on their advantages for improving drug solubility, maintenance of drug targeting, and attenuation of drug toxicity. In vitro release test is the critical physical parameter to determine the pharmaceutical quality of the product, to monitor formulation design and batch-to-batch variation.

Methods:

Spectrophotometric and chromatographic methods are mostly used in quantification studies from in vitro release test of nano-drug delivery systems. These techniques have advantages and disadvantages with respect to each other considering dynamic range, selectivity, automation, compatibility with in vitro release media and cost per sample.

Results:

It is very important to determine the correct kinetic profile of active pharmaceutical substances. At this point, the analytical method used for in vitro release tests has become a very critical parameter to correctly assess the profiles. In this review, we provided an overview of analytical methods applied to the in vitro release assay of various nanopharmaceuticals.

Conclusion:

This review presents practical direction on analytical method selection for in vitro release test on nanopharmaceuticals. Moreover, precautions on analytical method selection, optimization and validation were discussed.

Combinatorial therapeutic approach for treatment of oral squamous cell carcinoma

Oral squamous cell carcinoma (OSCC) is one of the common type of cancer in humans. A combinatorial approach has been done by using paclitaxel (PTX), 5-fluorouracil (5-FU) and ascorbic acid (AA) loaded solid lipid nanoparticles (SLN) for its treatment. SLN were made by high-speed homogenization and ultrasonication technique and they were used alone and in combination to check their efficacy against OSCC induced animal model. Pharmacokinetics and biodistribution study of the optimized formulations for PTX, 5-FU and AA loaded SLN was performed. The SLN shows a biphasic nature of drug release both in the in-vitro and in-vivo system. SLN loaded with PTX in combination with SLN loaded with AA shows a greater potency in the treatment of OSCC in-vivo. The Pharmacokinetic and biodistribution studies of SLN depict a better therapeutic efficacy. The combination of PTX and AA loaded SLN can be a novel approach for the treatment of OSCC.

Insights on Oral Drug Delivery of Lipid Nanocarriers: a Win-Win Solution for Augmenting Bioavailability of Antiretroviral Drugs

The therapeutic functionality of innumerable antiretroviral drugs is supposedly obscured owing to their low metabolic stability in the gastrointestinal tract and poor solubilization property leading to poor oral bioavailability. Dictated by such needs, lipid-based formulations could be tailored using nanotechnology which would be instrumental in ameliorating the attributes of such drugs. The stupendous advantages which lipid nanocarriers offer including improved drug stability and peroral bioavailability coupled with sustained drug release profile and feasibility to incorporate wide array of drugs makes it a potential candidate for pharmaceutical formulations. Furthermore, they also impart targeted drug delivery thereby widening their arena for use. Therefore, the review will encompass the details pertaining to numerous lipid nanocarriers such as nanoemulsion, solid lipid nanoparticle, nanostructured lipid carriers, and so on. These nanocarriers bear the prospective of improving the mucosal adhesion property of the drugs which ultimately upgrades its pharmacokinetic profile. The biodegradable and physiological nature of the lipid excipients used in the formulation is the key parameter and advocates for their safe use. Nevertheless, these lipid-based nanocarriers are amenable to alterations which could be rightly achieved by changing the excipients used or by modifying the process parameters. Thus, the review will systematically envisage the impending benefits and future perspectives of different lipid nanocarriers used in oral delivery of antiretroviral drugs.

Systematic approach for the formulation and optimization of atorvastatin loaded solid lipid NANOAPARTICLES using response surface methodology

Atorvastatin is a lipid lowering agent with poor oral bioavailability (12%) because of poor solubility and extensive first pass hepatic metabolism. In order to overcome these issues, atorvastatin loaded solid lipid nanoparticles (ATOR-SLNs) were prepared by using glyceryl tripalmitate as lipid carrier, poloxamer 407 as surfactant and soya lecithin as emulsifier. The purpose of this work was to optimize the formulation with the application of response surface methodology to improve the physicochemical properties. The central composite rotatable design consisting of three factored factorial design with three levels was used for the optimization of the formulations. The optimized formulation was composed of drug/lipid ratio of 1:3.64, surfactant concentration of 1.5% with 5 min time for sonication. Fourier transforms infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) studies confirmed the compatibility of drug and lipid in the formulation. The optimized ATOR- SLNs showed almost spherical shape with a mean particle size of 338.5 nm, zeta potential of -24.7mV, DL of 17.7% and EE of 81.06% respectively. The in vitro drug release study showed a burst release at the initial stage followed by the prolongation of drug release from lipid matrix. Stability study revealed that ATOR-SLNs were more stable at 4±2˚C when compared with storage at 25±2˚C/60±5% RH during the six months storage period. These results indicated that the developed ATOR-SLNs is a promising approach for increment of bioavailability by improving the physicochemical properties.

Rescuing cholinergic neurons from apoptotic degeneration by targeting of serotonin modulator-and apolipoprotein E-conjugated liposomes to the hippocampus

β-Amyloid (Aβ)-targeting liposomes (LIP) with surface serotonin modulator (SM) and apolipoprotein E (ApoE) were utilized to facilitate the delivery of nerve growth factor (NGF) across the blood-brain barrier (BBB) for neuroprotection in the hippocampus. The therapeutic efficacy of SM- and ApoE-grafted LIP carrying NGF (NGF-SM-ApoE-LIP) was assessed by an in vitro Alzheimer's disease (AD) model of degenerated SK-N-MC cells and an in vivo AD model of Aβ-insulted Wistar rats. The experimental evidences revealed that the modified SM and ApoE on the surface of LIP increased the permeation of NGF across the BBB without serious damage to structural integrity of tight junction. When compared with free NGF, NGF-SM-ApoE-LIP upregulated the expression of phosphorylated neurotrophic tyrosine kinase receptor type 1 on cholinergic neurons and significantly improved their survival. In addition, NGF-SM-ApoE-LIP could reduce the secretion of acetylcholinesterase and malondialdehyde and rescue hippocampal neurons from apoptosis in rat brains. The synergistic effect of SM and ApoE is promising in the induction of NGF to inhibit the neurotoxicity of Aβ and NGF-SM-ApoE-LIP can be a potent antiapoptotic pharmacotherapy for clinical care of patients with AD.

Solid lipid nanoparticles as attractive drug vehicles: Composition, properties and therapeutic strategies

This work briefly reviews up-to-date developments in solid lipid nanoparticles (SLNs) as effective nanocolloidal system for drug delivery. It summarizes SLNs in terms of their preparation, surface modification and properties. The application of SLNs as a carrier system enables to improve the therapeutic efficacy of drugs from various therapeutic groups. Present uses of SLNs include cancer therapy, dermatology, bacterial infections, brain targeting and eye disorders among others. The usage of SLNs provides enhanced pharmacokinetic properties and modulated release of drugs. SLN ubiquitous application results from their specific features such as possibility of surface modification, increased permeation through biological barriers, resistance to chemical degradation, possibility of co-delivery of various therapeutic agents or stimuli-responsiveness. This paper will be useful to the scientists working in the domain of SLN-based drug delivery systems.

Polymeric nanoparticles containing diazepam: preparation, optimization, characterization, in-vitro drug release and release kinetic study

Nanoparticles formulated from biodegradable polymers like poly(lactic-co-glycolic acid) (PLGA) are being extensively investigated as drug delivery systems due to their two important properties such as biocompatibility and controlled drug release characteristics. The aim of this work to formulated diazepam loaded PLGA nanoparticles by using emulsion solvent evaporation technique. Polyvinyl alcohol (PVA) is used as stabilizing agent. Diazepam is a benzodiazepine derivative drug, and widely used as an anticonvulsant in the treatment of various types of epilepsy, insomnia and anxiety. This work investigates the effects of some preparation variables on the size and shape of nanoparticles prepared by emulsion solvent evaporation method. These nanoparticles were characterized by photon correlation spectroscopy (PCS), transmission electron microscopy (TEM). Zeta potential study was also performed to understand the surface charge of nanoparticles. The drug release from drug loaded nanoparticles was studied by dialysis bag method and the in vitro drug release data was also studied by various kinetic models. The results show that sonication time, polymer content, surfactant concentration, ratio of organic to aqueous phase volume, and the amount of drug have an important effect on the size of nanoparticles. Hopefully we produced spherical shape Diazepam loaded PLGA nanoparticles with a size range under 250 nm with zeta potential -23.3 mV. The in vitro drug release analysis shows sustained release of drug from nanoparticles and follow Korsmeyer-Peppas model.

Nanodrug formulations to enhance HIV drug exposure in lymphoid tissues and cells: clinical significance and potential impact on treatment and eradication of HIV/AIDS

Although oral combination antiretroviral therapy effectively clears plasma HIV, patients on oral drugs exhibit much lower drug concentrations in lymph nodes than blood. This drug insufficiency is linked to residual HIV in cells of lymph nodes. While nanoformulations improve drug solubility, safety and delivery, most HIV nanoformulations are intended to extend plasma levels. A stable nanodrug combination that transports, delivers and accumulates in lymph nodes is needed to clear HIV in lymphoid tissues. This review discusses limitations of current oral combination antiretroviral therapy and advances in anti-HIV nanoformulations. A 'systems approach' has been proposed to overcome these limitations. This concept has been used to develop nanoformulations for overcoming drug insufficiency, extending cell and tissue exposure and clearing virus for treating HIV/AIDS.

Revealing the potential of Didodecyldimethylammonium bromide as efficient scaffold for fabrication of nano liquid crystalline structures

To exploit the potential of Didodecyldimethylammonium bromide (D12DAB) as a core lipidic constituent, an attempt was made to fabricate and optimize cationic nanostructured lipid carriers (cNLCs) using a cost-effective microemulsification methodology. Designed composition was optimized by studying the effect of different microemulsion components on D12DAB cNLCs characteristics. ​Spherical shaped D12DAB cNLCs were obtained with an average size of ∼160 nm and zeta potential of +30.2 mV. Differential Scanning Calorimetry (DSC) depicted the presence of thermotropic character, whereas polarized optical microscopy confirmed the mesophase like behavior of D12DAB based cNLCs. In addition, hemolysis analysis revealed that the toxicity was concentration dependent as LC50 was reached at a concentration of 50 μg/mL of cNLCs. This class of cNLCs is expected to become a potent candidate for a broad spectrum of medicaments as carriers, targeting for pharmaceutical and medicinal purposes, due to the combination of a hard lipid with a soft lipid, where the liquid crystalline structure of the lipid co-exists.

Structure of solid lipid nanoparticles produced by a microwave-assisted microemulsion technique

The current study investigates the structure of solid lipid nanoparticles, prepared using a recently reported microwave-assisted microemulsion technique, by multi-angle static and dynamic light scattering and small angle X-ray scattering techniques.

Nanosuspensions of poorly water-soluble drugs prepared by bottom-up technologies

In recent years, nanosuspension has been considered effective in the delivery of water-soluble drugs. One of the main challenges to effective drug delivery is designing an appropriate nanosuspension preparation approach with low energy input and erosion contamination, such as the bottom-up method. This review focuses on bottom-up technologies for preparation of nanosuspensions. The features and advantages of drug nanosuspension, including bottom-up methods as well as the corresponding characterization techniques, solidification methods, and drug delivery dosage forms, are discussed in detail. Certain limitations of commercial nanosuspension products are also reviewed.