Preparation and characterization of zein/chitosan complex for encapsulation of α-tocopherol, and its in vitro controlled release study

Genipin-enriched chitosan-Zein nanoparticles for improved curcumin encapsulation

Polysaccharide-protein nanocomplexes are considered one of the desired systems to encapsulate bioactive compounds. The study prepared chitosan (CS)/genipin (GP)/zein nanoparticles with chemical cross-linkage for encapsulating and releasing curcumin. Fourier transform infrared spectra demonstrated that cross-linkage between molecules was attributed to electrostatic interactions and the formation of amido bonds and hydrogen bonding. Transmission electron microscopy showed that all prepared nanoparticles showed a spherical morphology. Particularly, cinnamaldehyde screening -NH2 groups in CS significantly reduced the encapsulation efficiency of nanoparticles, demonstrating the significant role of the -NH2 group in CS-coated zein nanoparticles. Additionally, the encapsulation efficiency was largely increased to 82.3 % at the ratio of CS/GP/zein (w/w, 20:1:100), compared with 38.4 % using zein as a single encapsulation for curcumin. In vitro digestion, the addition of GP and CS decreased the release of curcumin from 84.8 % to 57.1 % after the initial digestion of 2 h. The GP/CS/zein particles retained 12 % of curcumin after 6- h of digestion, indicating the improvements in encapsulation efficiency and release properties.

Preparation, characterization, and binding mechanism of quercetin-loaded composite nanoparticles based on zein-soybean protein isolate

In this study, quercetin (Que) was encapsulated for controlled release during gastrointestinal digestion using zein-soy isolate protein (SPI) composite nanoparticles that were made following an antisolvent precipitation technique. The average particle size of the composite nanoparticles ranged from 182.1 to 230.9 nm, and the polydispersity index (PDI) was small (0.105-0.323). The microstructure revealed that the composite nanoparticles were spherically distributed and that Que. was embedded on the surface of the nanoparticles. Que. has an encapsulation efficiency of up to 93.3 %. Spectrum analysis, molecular docking and zeta potential measurements revealed that the interactions between the composite nanoparticles and Que. occurred mainly through hydrophobic interactions, hydrogen bonding, and electrostatic interactions. Compared with single zein nanoparticles, the composite nanoparticles showed a significant and controlled release of Que. during the whole simulated gastrointestinal digestion process. This study provides a novel method for the development of a controlled-release drug delivery system for controlling the release of Que.

Electrospinning zein with theaflavin: Production, characterization, and application in active packaging for cold-fresh pork

The interest and demand for active food packaging made from all natural materials have increased significantly, driven by the intent to minimize the ecological impact. Green electrospinning from biopolymers with antimicrobial compounds is considered an ideal candidate for constructing ultrathin, excellent performance, and effective antibacterial fibrous films (FFs). Here, a green electrospinning from zein (Z) ethanol-aqueous solution with varied theaflavin (TF) concentrations (0.6-4 %) was utilized as active packaging for cold-fresh pork. All the Z/TF composite fibrous films (ZTF-FFs) exhibited smooth and uniform surfaces, and their average fiber diameter increased from 484 nm to 705 nm with higher TF concentration. TF addition altered the secondary and crystalline structure of Z-FF, evidenced by Fourier-transform infrared spectroscopy and X-ray diffraction. At 1 % TF addition, ZTF1-FF displayed enhanced thermodynamic stability, with a decomposition residue of 13.88 % and a maximum mass loss rate temperature of 313.45 °C. ZTF1-FF also exhibited excellent hydrophobicity, superior mechanical properties, and significant antibacterial activity against S. aureus and S. paratyphi B. When used for active packaging of cold-fresh pork, ZTF1-FF significantly delayed the increases in total volatile basic nitrogen, total viable count, pH, weight loss, and thiobarbituric acid reactive substances of the pork. Overall, ZTF1-FF showed the most promising potential as an active food packaging material, particularly for preserving cold-fresh meat.

Vitamin D3 capsulation using maillard reaction complex of sodium caseinate and tragacanth gum

The encapsulation of vitamin D3 (VitD3) using the Maillard reaction complex of sodium caseinate-tragacanth gum (TG) to the production of water-soluble vitamins were studied. Spray drying was used to prepare the complex. Its physicochemical properties, stability, and release characteristics were evaluated. The results showed that containing sodium caseinate- Tragacanth gum (TG) 1 % (w/v) and VitD3 1 % (w/v) had the highest encapsulation efficiency (71 %). The resulting microcapsules showed suitable particle size, strong negative zeta potential, and good stability with spherical morphology. Thermal and spectroscopic analyses showed proper interaction between wall and core components. In vitro, release and simulated digestion studies demonstrated the ability of microcapsules to protect VitD3 under gastric conditions and provide controlled release in the intestine. This encapsulation system shows potential for enriching food with VitD3 and increasing its stability and bioavailability.

Enhanced solubility, stability, bioaccessibility, and antioxidant activity of curcumin with hydrolyzed pea protein-based nano-micelles: pH-driven method vs ethanol-induced method

Pea protein nano-micelles gained with partial hydrolysis by a proteolytic enzyme (Protamex) were employed as nanocarriers to encapsulate and stabilize liable and hydrophobic curcumin (CUR) with two various methods (pH-driven method (PDM) and ethanol-induced method (EIM)). Both CUR-loaded pea protein hydrolysates (PPHs) nano-micelles by PDM and EIM exhibited spherical shapes, and uniform particle size distributions. Highest CUR loading amount (3.21 %) was gained with PPHs by PDM. The interaction between PPHs nano-micelles and curcumin was comprehensively examined with optical spectroscopy. These outcomes obviously demonstrated the water solubility, storage stability against UV light and heating, bioaccessibility and in vitro antioxidant activity of CUR can be pronouncedly enhanced with PPHs-based nanocarriers. Interestingly, PPHs-CUR nano-micelles fabricated with PDM have higher loading amount, light stability, and better bioaccessibility as well as antioxidant activity than those by EIM. These results clearly show that PDM may be a better method than EIM and provide useful information in nutraceuticals encapsulation with vegetable proteins-based delivery systems.

Characterization of pectin-zein nanoparticles encapsulating tanshinone: Antioxidant activity, controlled release properties, physicochemical stability to environmental stresses

Tanshinone compounds, natural antioxidants found in the roots of Salvia subg Perovskia plants, offer various health benefits and can serve as natural food additives, replacing synthetic antioxidants. In this study, the nanoparticles were created using the antisolvent method, which were then evaluated for their antioxidant and antibacterial properties, as well as their ability to release tanshinone and withstand environmental stress. The results of the study demonstrated a significant improvement in the antioxidant capabilities of tanshinone with the nanoparticle coating. The T/Z/P NPs exhibited enhanced tanshinone release under simulated gastrointestinal conditions compared to T/Z nanoparticles. These nanoparticles displayed remarkable stability against fluctuations in environmental pH and thermal conditions. The study also revealed that the critical flocculation concentration of the system was 0.5 M of salt. Furthermore, the T/Z/P NPs showed good stability during storage at 4°C for 30 days, making them an excellent candidate for use in various food products.

Fabrication and characterization of curcumin-encapsulated composite nanoparticles based on soybean protein isolate hydrolysate/soybean polysaccharides: Interaction mechanism, stability and controlled release properties

This study developed a stable nanoparticle (CUR-SPIH/SSPS) using soybean protein isolate hydrolysate (SPIH) and soybean polysaccharides (SPSS) to protect curcumin (CUR) from degradation during storage and exposure to light and heat conditions, achieving controlled release. The SPIH to SPSS mass ratio of 5:1 gave the CUR-SPIH/SPSS nanoparticles with the highest CUR encapsulation efficiency (95.60 ± 3.00 %) and the strongest antioxidant capacity (90.26 ± 2.42 % and 66.78 ± 1.89 % for ABTS•+ and DPPH radical scavenging ability, respectively), and CUR was successfully encapsulated within the CUR-SPIH/SPSS as evidenced by X-ray diffraction. FTIR and fluorescence spectroscopy analysis confirmed that the interactions in CUR-SPIH/SPSS are primarily driven by electrostatic, hydrogen bonding, and hydrophobic interactions. Moreover, the CUR-SPIH/SPSS nanoparticles significantly enhanced CUR's thermal and UV light stability. The UV degradation kinetics showed that the half-life of CUR-SPIH/SPSS (247.55 min) was 1.61 times longer than that of free CUR (154.03 min). The release rate of CUR incorporated into CUR-SPIH/SPSS was significantly delayed during in vitro gastrointestinal digestion. This study introduces an innovative nanoparticle strategy for the stable delivery of lipophilic compounds.

Effect of ultrasonic treatment on the structure and emulsification properties of soybean isolate protein-hyaluronic acid complexes and the stability of their loaded astaxanthin emulsions

The purpose of this work was to prepare an astaxanthin emulsion stabilized by a soybean isolate protein (SPI)-hyaluronic acid (HA) complex and to investigate its protective effect on astaxanthin. In order to examine the impact of various ultrasonic energies (0 W-300 W) on the structural characteristics of the complex and the stability of the emulsion, the SPI-HA complex was created via ultrasonography. The findings demonstrated that ultrasonication may had an impact on the hydrophobic, electrostatic, and hydrogen bonding interactions between SPI and HA, which caused the protein structure to unfold and reveal the interior hydrophobic amino acid residues. Moreover, ultrasonication enhanced the emulsification qualities of SPI-HA complexes by lowering their average particle size. The rheological findings demonstrated that the emulsion's viscosity and energy storage modulus (G') were considerably decreased by the ultrasonic treatment. The appearance of the emulsions and optical microscopy results further indicated that the emulsions prepared from SPI-HA had superior storage stability, pH stability, and light stability compared to pure SPI. SPI-HA exhibited superior emulsion stability and lower particle size at 150 W ultrasonic power. The AST incorporated in the emulsion was also well protected. The emulsion effectively slows down the degradation of AST. The findings of this study may help create more robust and natural emulsion delivery systems that guarantee the continuous or regulated release of lipophilic bioactive compounds.

Combined pulsed electric field-ultrasound assisted extraction of yarrow phenolic-rich ingredients and their nanoliposomal encapsulation for improving the oxidative stability of sesame oil

In this research, yarrow phenolic-rich extract was produced using pulsed electric field (PEF)-ultrasound assisted technology. The highest extraction efficiency (5.99 %) was obtained at 6.25 kV/cm of PEF and the sonication time of 60 min. As the PEF intensity and sonication time rose, the total phenolic content (TPC) and ferric-reducing power (RP) of the extracts increased. The PEF intensity of 2.70 kV/cm and sonication time of 45.83 min were the optimum extraction conditions resulting in the highest extraction efficiency, TPC, and RP. Then, this optimum extract was loaded into nanoliposomes. At higher extract levels, the encapsulation efficiency lowered, while the particle size, polydispersity index (PDI), and zeta potential of the nanoliposomal samples elevated. The results of Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) confirmed the successful encapsulation of yarrow extract into nanoliposomal carriers; the sample containing the extract had the highest enthalpy (3600 J/g) and nanoliposomes loaded with yarrow antioxidant extract (0.11 mL/mg) was the optimum sample. Finally, the sesame oil containing 500 ppm free and nanoliposome extract, as well as the sample with 200 ppm BHT were evaluated for oxidative stability. The highest oxidation stability (14.21 h) belonged to the oil containing nanoliposomal yarrow phenolic extract.

Microencapsulation of gamma oryzanol using inulin as wall material by spray drying: optimization of formulation and characterization of microcapsules

Gamma oryzanol (GO) is the rice bioactive compound which presents various therapeutic effects. However, GO is relatively unstable to environmental factors during processing and storage. The objective of this work was to produce GO microparticles encapsulated with inulin and Tween80 (GOINs) by spray-drying. Response surface analysis was used for the optimization of the encapsulation to get maximum % encapsulation efficiency (%EE) of GO. Three process variables for the concentration of 10-20% inulin (w/v), 3-5% Tween 80 (w/v), and 3-5% GO (w/v) were investigated. Quadratic polynomial regression model for the optimization with R2 at 0.92 was obtained from the study The optimum condition was 20% inulin (w/v), 3% Tween 80 (w/v), and 3% GO (w/v) which yielded a high % EE of 82.63% and particles size at 1,154.60 ± 28.85 nm Fourier transform infrared spectroscopy demonstrated that GO was encapsulated inside the inulin matrix. Our study provided potential and improved hygroscopicity ranged from 6.51 to 10.22 g H2O/100 g dry weight of GO in spray-dried microcapsules.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-024-05988-0.

Synthesis, characterization, antioxidant and bacteriostasis in preservation of isoorientin loaded Zein/GA nanoparticles

Isoorientin (Iso) is a natural flavone with multiple activities. In the present study, the partial chemical properties and activities of Iso were improved by the nanoparticle loading technique. Zein/GA nanoparticles were successfully synthesized with the antisolvent precipitation method, and the structure and stability of the Zein/GA nanoparticles loaded with Iso (Zein/GA-Iso nanoparticles) were characterized by FTIR, UV-vis spectroscopy and zeta-sizer analysis. Results showed that Zein/GA-Iso nanoparticles possessed greater stability, light stability, hydrophilicity and antioxidant activity. Furthermore, Zein/GA-Iso nanoparticles exerted notable antibacterial activity against E. coli, S. aureus, and P. aeruginosa by destroying the permeability and integrity of cell membrane. On this basis, Zein/GA-Iso nanoparticles do have a bacteriostatic effect on pork. In conclusion, Zein/GA-Iso nanoparticles had better stability and pork preservation for applications in the food processing field as a new type of antiseptic and freshening agent.

Nanoencapsulation of limonene in octenyl succinic anhydride-modified starch (OSA-ST) and maltodextrin: Investigation and comparison of physicochemical properties, efficiency and morphology of nanoparticles

In recent years, the application of nanoencapsulation has attracted enormous attention for various food and pharmaceutical purposes. In this study, a functional powder containing limonene (the nutraceutical at concentration of 5 and 10 %) was prepared using octenyl succinic anhydride-modified starch (OSA-ST) and maltodextrin as carriers at 15 and 30 %. The emulsions were sonicated at a frequency of 30 kHz and a power of 100 W for 9 and 18 min, and the final nanoparticles were prepared through freeze-drying. The particle sizes were in the ranges of 62-248 and 10-24 nm in the suspensions of OSA and maltodextrin, respectively. The smaller particles of the maltodextrin-prepared sample resulted in more transparency. The zeta potential and consequently the stability of the maltodextrin-prepared emulsions were higher than those of the OSA-ST-prepared ones. As the maltodextrin concentration increased, this parameter was elevated from -42 to -36 as a result of the coverage of the surface-active lipids. The results of solubility correlated with those of the zeta potential (89.21 % for maltodextrin-prepared and 82.51 % for OSA-ST-prepared samples). The highest encapsulation efficiency (EE = 0.9) belonged to the samples prepared with OSA-ST. Comparison of the scanning electron microscopy (SEM) images revealed that the type of the wall material influenced the physical structure of the nanoparticles which were mostly porous and flake-like. Considering its encapsulating-emulsifying properties, OSA-ST can be suggested as a carrier for limonene with the need for emulsifiers.

Synergistic effect of gellan gum and guar gum on improving the foaming properties of soy protein isolate-based complexes: Interaction mechanism and interfacial behavior

Interactions among multi-component play a critical role in modulating the foaming properties of aerated foods. This study evaluated the mechanisms of synergistic improvement of gellan gum (GEG) and guar gum (GUG) on the foaming properties of soy protein isolate (SPI)-based complex. The results showed that the GEG/GUG ratio was closely related to the intermolecular interactions of SPI-based ternary complex and the dynamical changing of its foaming properties. The SPI/GEG/GUG ternary complex with a GEG/GUG ratio of 2/3 exhibited the highest foamability (195 %) and comparable foam stability (99.17 %), which were 32.95 % and 2.99 % higher than that of SPI/GEG binary complex. At this ratio, GUG promoted the interactions between SPI and GEG, and bound to complex's surface through hydrogen bonding, resulting in the increase of particle size and surface charge, and the decrease of surface hydrophobicity. Although this reduced the diffusion of complex onto the air/water interface, it increased permeation rate and molecular rearrangement behavior, which were the potential mechanisms to improve the foaming properties. Additionally, the synergistic effect of GEG and GUG also enhanced the elastic strength and solid characteristics of foam systems. This study provided a theoretical guidance for the targeted modulation of foaming properties of multi-component aerated foods.

Novel griseofulvin zinc nanohybrid emulsion for intensifying the antimicrobial control of dermatophytes and some opportunistic pathogens

Dermatophytosis is a critical sort of skin infection caused by dermatophytes. The long-term treatment of such skin infections may be improved through the application of nanotechnology. This study aimed to prepare griseofulvin zinc Nanohybrid emulsion (GF-Zn-NHE) to improve griseofulvin activity against dermatophytes and some opportunistic pathogenic yeasts and bacteria. The GF-Zn-NHE is prepared by ultra-homogenization ultra-sonication strategies and validated by UV-visible spectroscopy analysis that confirms presences of griseofulvin and Zn-NPs peaks at 265 and 360 nm, respectively. The GF-Zn-NHE has mean distribution size 50 nm and zeta potential in the range from -40 to -36 mV with no significant changes in size distribution and particle size within 120 day ageing. Fourier transform infrared spectroscopy spectrum confirmed the presence of griseofulvin and Zn-NPs stretching vibration peaks. Gamma ray has a negative influence on GF-Zn-NE production and stability. GF-Zn-NHE drug release 95% up to 24 h and 98% up to 72 h of GF was observed and Zinc 90% up to 24 h and 95% up to 72 h, respectively. High antimicrobial activity was observed with GF-Zn-NHE against dermatophytic pathogens in compare with GF, GF-NE, zinc nitrate and ketoconazole with inhibition zone ranged from 14 to 36 mm. The results have shown that the MIC value for Cryptococcus neoformans, Prophyromonas gingivalis and Pseudomonas aeruginosa is 0.125 mg ml -1 and for Trichophyton rubrum, L. bulgaricus and Escherichia coli value is 0.25 mg ml -1 and for Candida albicans, Malassezia furfur and Enterococcus faecalis is 0.5 mg ml -1 and finally 1 mg ml -1 for Streptococcus mutans. TEM of treated Cryptococcus neoformans cells with GF-Zn-NHE displayed essentially modified morphology, degradation, damage of organelles, vacuoles and other structures.

Synthesis of Ganoderic Acids Loaded Zein-Chitosan Nanoparticles and Evaluation of Their Hepatoprotective Effect on Mice Given Excessive Alcohol

Ganoderma lucidum, used in East Asia for its health benefits, contains ganoderic acids (GA) which have various pharmacological activities but are limited by poor water solubility and low oral bioaccessibility. This study synthesized and characterized ganoderic acids loaded zein-chitosan nanoparticles (GA-NPs), and investigated its advantages in alleviating alcoholic liver injury (ALI) in mice model. The GA-NPs demonstrated high encapsulation efficiency (92.68%), small particle size (177.20 nm), and a +29.53 mV zeta potential. The experimental results of alcohol-induced liver injury mouse model showed that GA-NPs significantly improved liver metabolic function, reduced alcohol-induced liver oxidative stress in liver by decreasing lactate dehydrogenase activity and malondialdehyde level, while increasing the activities of liver antioxidant enzymes and alcohol dehydrogenase. Moreover, GA-NPs were favorable to ameliorate intestinal microbiota dysbiosis in mice exposed to alcohol by increasing the proportion of probiotics such as Romboutsia, Faecalibaculum, Bifidobacterium and Turicibacter, etc., which were highly correlated with the improvement of liver function. Furthermore, GA-NPs modulated the mRNA expression related to ethanol metabolism, oxidative stress and lipid metabolism. Conclusively, this study revealed that GA-NPs have stronger hepatoprotective effects than non-encapsulated ganoderic acids on alleviating ALI by regulating intestinal microbiota and liver metabolism.

Stabilization of zein nanoparticles with tween-80 and fucoidan for encapsulation of eugenol via a nozzle simulation chip

Eugenol (EU), a natural bioactive compound found in various plants, offers numerous health benefits, but its application in the food and pharmaceutical industry is limited by its high volatility, instability, and low water solubility. Therefore, this study aimed to utilize the surface coating technique to develop zein-tween-80-fucoidan (Z-T-FD) composite nanoparticles for encapsulating eugenol using a nozzle simulation chip. The physicochemical characteristics of the composite nanoparticles were examined by varying the weight ratios of Z, T, and FD. Results showed that the Z-T-FD weight ratio of 5:1:15 exhibited excellent colloidal stability under a range of conditions, including pH (2-8), salt concentrations (10-500 mmol/L), heating (80 °C), and storage (30 days). Encapsulation of EU into Z-T-FD nanoparticles (0.5:5:1:15) resulted in an encapsulation efficiency of 49.29 ± 1.00%, loading capacity of 0.46 ± 0.05%, particle size of 205.01 ± 3.25 nm, PDI of 0.179 ± 0.006, and zeta-potential of 37.12 ± 1.87 mV. Spherical structures were formed through hydrophobic interaction and hydrogen bonding, as confirmed by Fourier transform infrared spectroscopy and molecular docking. Furthermore, the EU-Z-T-FD (0.5:5:1:15) nanoparticles displayed higher in vitro antioxidant properties (with DPPH and ABTS radical scavenging properties at 75.28 ± 0.16% and 39.13 ± 1.22%, respectively), in vitro bioaccessibility (64.78 ± 1.37%), and retention rates under thermal and storage conditions for EU compared to other formulations. These findings demonstrate that the Z-T-FD nanoparticle system can effectively encapsulate, protect, and deliver eugenol, making it a promising option for applications in the food and pharmaceutical industries.

Inclusion complexes of β-cyclodextrin with isomeric ester aroma compounds: Preparation, characterization, mechanism study, and controlled release

Cyclodextrins (CDs) have been discovered to provide an efficient solution to the limited application of ester aroma molecules used in food, tobacco, and medication due to their strong smell and unstable storage. This work combined molecular modeling and experimental to analyze the conformation and controlled release of isomeric ester aroma compounds/β-CD inclusion complexes (ICs). The investigation revealed that ester aroma compounds could be effectively encapsulated within the β-CD cavity, forming ICs with low binding affinity. Furthermore, the key driving forces in ICs were identified as hydrogen bonds and van der Waals interactions through theoretical simulation. Results from the Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) and Isothermal titration calorimetry (ITC) experiments confirmed the intermolecular interaction predicted by the molecular model. Notably, the release rate of aroma compounds from L-menthyl acetate/β-CD (LMA/β-CD) IC exceeded that of terpinyl acetate/β-CD (TA/β-CD) IC. This difference is attributed to the length of the chain of aroma molecules and the variation in the position of functional groups, influencing the stable formation of ICs with β-CD. These findings hold potential implications for refining the application of ICs across diverse industries.

Research advances in Zein-based nano-delivery systems

Zein is the main vegetable protein from maize. In recent years, Zein has been widely used in pharmaceutical, agriculture, food, environmental protection, and other fields because it has excellent biocompatibility and biosafety. However, there is still a lack of systematic review and research on Zein-based nano-delivery systems. This paper systematically reviews preparation and modification methods of Zein-based nano-delivery systems, based on the basic properties of Zein. It discusses the preparation of Zein nanoparticles and the influencing factors in detail, as well as analyzing the advantages and disadvantages of different preparation methods and summarizing modification methods of Zein nanoparticles. This study provides a new idea for the research of Zein-based nano-delivery system and promotes its application.

Layer-by-layer assembly of quercetin-loaded zein/γPGA/low-molecular-weight chitosan/fucoidan nanosystem for targeting inflamed blood vessels

Chitosan acts as a versatile carrier in polymeric nanoparticle (NP) for diverse drug administration routes. Delivery of antioxidants, such as quercetin (Qu) showcases potent antioxidant and anti-inflammatory properties for reduction of various cardiovascular diseases, but low water solubility limits uptake. To address this, we developed a novel layer-by-layer zein/gamma-polyglutamic acid (γPGA)/low-molecular-weight chitosan (LC)/fucoidan NP for encapsulating Qu and targeting inflamed vessel endothelial cells. We used zein (Z) and γPGA (r) to encapsulate Qu (Qu-Zr NP) exhibited notably higher encapsulation efficiency compared to zein alone. Qu-Zr NP coated with LC (Qu-ZrLC2 NP) shows a lower particle size (193.2 ± 2.9 nm), and a higher zeta potential value (35.2 ± 0.4 mV) by zeta potential and transmission electron microscopy analysis. After coating Qu-ZrLC2 NP with fucoidan, Qu-ZrLC2Fa NP presented particle size (225.16 ± 0.92 nm), zeta potential (-25.66 ± 0.51 mV) and maintained antioxidant activity. Further analysis revealed that Qu-ZrLC2Fa NP were targeted and taken up by HUVEC cells and EA.hy926 endothelial cells. Notably, we observed Qu-ZrLC2Fa NP targeting zebrafish vessels and isoproterenol-induced inflamed vessels of rat. Our layer-by-layer formulated zein/γPGA/LC/fucoidan NP show promise as a targeted delivery system for water-insoluble drugs. Qu-ZrLC2Fa NP exhibit potential as an anti-inflammatory therapeutic for blood vessels.

Over 100 years of vitamin E: An overview from synthesis and formulation to application in animal nutrition

The groundbreaking discovery of vitamin E by Evans and Bishop in 1922 was an important milestone in vitamin research, inspiring further investigation into its crucial role in both human and animal nutrition. Supplementing vitamin E has been proved to enhance multiple key physiological systems such as the reproductive, circulatory, nervous and muscular systems. As the main antioxidant in the blood and on a cellular level, vitamin E maintains the integrity of both cellular and vascular membranes and thus modulates the immune system. This overview showcases important and innovative routes for synthesizing vitamin E on a commercial scale, provides cutting-edge insights into formulation concepts for successful product form development and emphasizes the importance and future of vitamin E in healthy and sustainable animal nutrition.

Preparation and characterization of vitamin E microcapsules stabilized by Zein with different polysaccharides

Vitamin E (VE) microencapsulation using a green surfactant emulsifier not only protects the active substance and is also environmentally friendly. In this study, we used alcohol ether glycoside as an emulsifier to prepare VE microcapsules using the biological macromolecule Zein and various polysaccharides. The resulting nano microcapsules exhibited a spherical structure, stable morphology, uniform size, and a >90% encapsulation efficiency. They also had good thermal stability and slow-release properties. Of these, xanthan gum/Zein-VE microcapsules were superior, with antioxidant properties up to 3.05-fold higher than untreated VE. We successfully developed VE nano microcapsules that meet eco-friendly and sustainable requirements, which may have applications in the food and pharmaceutical industries.

Biomaterial-based combinatorial approach of aescin-comprised zein-coated gelatin nanoparticles alleviates synovial inflammation in experimental inflammatory arthritis

Rheumatoid arthritis (RA) is a chronic inflammatory autoimmune disease that mostly affects joints. Although RA therapy has made significant progress, difficulties including extensive medication metabolism and its quick clearance result in its inadequate bioavailability. The anti-inflammatory effect of zein was reported with other medications, but it has certain limitations. There are reports on the anti-oxidant and anti-inflammatory effect of aescin, which exhibits low bioavailability for the treatment of rheumatoid arthritis. Also, the combinatorial effect of zein with other effective drug delivery systems is still under investigation for the treatment of experimental collagen-induced rheumatoid arthritis. The focus of this study was to formulate and define the characteristics of zein-coated gelatin nanoparticles encapsulated with aescin (Ze@Aes-GNPs) and to assess and contrast the therapeutic effectiveness of Ze@Aes-GNPs towards collagen-induced RA in Wistar rats. Nanoprecipitation and the layer-by-layer coating process were used to fabricate Ze@Aes-GNPs and their hydrodynamic diameter was determined to be 182 nm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to further validate the size, shape, and surface morphology of Ze@Aes-GNPs. When tested against foreskin fibroblasts (BJ), these nanoparticles demonstrated significantly high cytocompatibility. Both Aes and Ze@Aes-GNPs were effective in treating arthritis, as shown by the decreased edoema, erythema, and swelling of the joints, between which Ze@Aes-GNPs were more effective. Further, it was demonstrated that Aes and Ze@Aes-GNPs reduced the levels of oxidative stress (articular elastase, lipid peroxidation, catalase, superoxide dismutase and nitric oxide) and inflammatory indicators (TNF-α, IL-1β and myeloperoxidase). The histopathology findings further demonstrated that Ze@Aes-GNPs considerably reduced the infiltration of inflammatory cells at the ankle joint cartilage compared to Aes. Additionally, immunohistochemistry examination showed that treatment with Ze@Aes-GNPs suppressed the expression of pro-inflammatory markers (COX-2 and IL-6) while increasing the expression of SOD1. In summary, the experiments indicated that Aes and Ze@Aes-GNPs lowered the severity of arthritis, and critically, Ze@Aes-GNPs showed better effectiveness in comparison to Aes. This suppression of oxidative stress and inflammation was likely driven by Aes and Ze@Aes-GNPs.

Revolutionizing Cancer Treatment: The Promising Horizon of Zein Nanosystems

Various nanomaterials have recently become fascinating tools in cancer diagnostic applications because of their multifunctional and inherent molecular characteristics that support efficient diagnosis and image-guided therapy. Zein nanoparticles are a protein derived from maize. It belongs to the class of prolamins possessing a spherical structure with conformational properties similar to those of conventional globular proteins like ribonuclease and insulin. Zein nanoparticles have gained massive interest over the past couple of years owing to their natural hydrophilicity, ease of functionalization, biodegradability, and biocompatibility, thereby improving oral bioavailability, nanoparticle targeting, and prolonged drug administration. Thus, zein nanoparticles are becoming a promising candidate for precision cancer drug delivery. This review highlights the clinical significance of applying zein nanosystems for cancer theragnostic─moreover, the role of zein nanosystems for cancer drug delivery, anticancer agents, and gene therapy. Finally, the difficulties and potential uses of these NPs in cancer treatment and detection are discussed. This review will pave the way for researchers to develop theranostic strategies for precision medicine utilizing zein nanosystems.

Metformin Loaded Zein Polymeric Nanoparticles to Augment Antitumor Activity against Ehrlich Carcinoma via Activation of AMPK Pathway: D-Optimal Design Optimization, In Vitro Characterization, and In Vivo Study

Metformin (MET), an antidiabetic drug, is emerging as a promising anticancer agent. This study was initiated to investigate the antitumor effects and potential molecular targets of MET in mice bearing solid Ehrlich carcinoma (SEC) as a model of breast cancer (BC) and to explore the potential of zein nanoparticles (ZNs) as a carrier for improving the anticancer effect of MET. ZNs were fabricated through ethanol injection followed by probe sonication method. The optimum ZN formulation (ZN8) was spherical and contained 5 mg zein and 30 mg sodium deoxycholate with a small particle size and high entrapment efficiency percentage and zeta potential. A stability study showed that ZN8 was stable for up to three months. In vitro release profiles proved the sustained effect of ZN8 compared to the MET solution. Treatment of SEC-bearing mice with ZN8 produced a more pronounced anticancer effect which was mediated by upregulation of P53 and miRNA-543 as well as downregulation of NF-κB and miRNA-191-5p gene expression. Furthermore, ZN8 produced a marked elevation in pAMPK and caspase-3 levels as well as a significant decrease in cyclin D1, COX-2, and PGE2 levels. The acquired findings verified the potency of MET-loaded ZNs as a treatment approach for BC.

Soy protein isolate-sodium alginate colloidal particles for improving the stability of high internal phase Pickering emulsions: Effects of mass ratios

The potential of sodium alginate (SA) at different mass ratios to improve the emulsifying ability of soy protein isolate (SPI) in high internal phase Pickering emulsions (HIPPEs) was evaluated in this work. SPI-SA particles were used as a natural particle stabilizer of HIPPEs with 80 % oil phase. The properties of particles with varying SPI to SA ratios (10:0, 10:1, 10:3, 10:5, 10:10, and 10:15 w/w) were evaluated. HIPPEs with a 10:10 SPI to SA ratio exhibited the smallest droplet sizes. Both the storage modulus and loss modulus of the HIPPEs increased with increasing SA addition ratios, implying that HIPPEs with higher SA addition have stronger gel characteristics. In addition, super-resolution microscopy and cryogenic scanning electron microscopy indicated that SA addition strengthened the compactness of the interface film and increased the distribution uniformity of HIPPEs. In conclusion, the combination of SPI and SA is beneficial for improving the performance of HIPPEs.

Development of sorghum arabinoxylan-soy protein isolate composite nanoparticles for delivery of curcumin: Effect of polysaccharide content on stability and in vitro digestibility

The purpose of this study was to fabricate composite nanoparticles using soy protein isolate (SPI) and sorghum bran arabinoxylan (AX) for the delivery of curcumin (Cur). The influences of AX concentrations on the physicochemical characteristic, stability and bioaccessibility of curcumin were investigated. The findings showed that the encapsulation efficiency of curcumin obviously increased upon incorporating AX in comparison to SPI-Cur particles. Hydrogen bonds and hydrophobic interactions were the primary driving forces for the formation of SPI-Cur-AX nanoparticles (SCA). SCA nanoparticles with 1.00 % AX exhibited a uniform size with orderly distribution, suggesting its remarkable physical stability due to the strengthened electrostatic repulsion. However, excessive AX led to aggregation of particles, a noticeable increase in size, and subsequently, a reduction in stability. Due to the heightened free radical scavenging capacity of sorghum AX, SCA nanoparticles exhibited superior antioxidant capabilities. Compared to free curcumin, encapsulation within composite particles significantly enhanced the retention rate and bioaccessibility of curcumin. This improvement was attributed to the potent emulsification ability of AX, which coordinated with bile salt to promote the transfer of curcumin into micelles. The research provides an effective strategy for developing food-grade delivery carriers aimed at enhancing dispersibility, stability and bioaccessibility of the fat-soluble bioactives.

Fabrication and characterization of pectin-zein nanoparticles containing tanshinone using anti-solvent precipitation method

Tanshinone compounds are secondary metabolites which their application in food and pharmaceutical industry is limited due to the low solubility in water and sensitivity to heat. This study aimed to develop a novel biopolymer nanocarriers system based on pectin/zein for the encapsulation of tanshinone compounds using the anti-solvent precipitation method. The concentration of pectin and mass ratio of tanshinone/zein in the final formulation of nanoparticles were optimized. According to the results, a pectin concentration of 1 g/L and a tanshinone/zein ratio of 0.1:1 g/g were considered the optimal nanoparticle formulation. The resulting nanoparticles exhibited a spherical core-shell structure, with approximate values for size, zeta potential, TSI, and encapsulation efficiency of 132 ± 0.002 nm, -38.6 ± 0.019 mV, 0.600 ± 0.084, and 79.41 ± 0.62 %, respectively. The FTIR test confirmed the presence of hydrophobic, hydrogen, and electrostatic interactions among the constituents within the nanoparticles. Additionally, XRD and DSC tests verified the amorphous nature of the nanoparticles. Morphological examination conducted through TEM, and SEM revealed the characteristics of the resulting nanoparticles. Furthermore, this carrier system significantly enhanced the solubility of tanshinone compounds in water.

Effects of κ-carrageenan on the emulsifying ability and encapsulation properties of pea protein isolate-grape seed oil emulsions

This work investigated the characteristics of pea protein isolate and κ-carrageenan complexes in stabilizing curcumin-loaded emulsions. The complexes structured by electrostatic attraction exhibited biphasic wettability with increased three-phase contact angles close to 90°. Morphological differences in the complexes were the critical factor influencing their emulsifying ability at various pH. As a steric barrier via increasing net negative charge (up to -54.7 ± 2.4 mV) and adsorbed protein content (92.57 %-97.61 %), the interfacial layer could retard droplet coalescence and improve emulsions stability. Rheological tests verified the higher viscoelasticity of emulsions by raising the oil fraction. After 4 weeks of heating treatment, the chemical stability of curcumin was prominently enhanced from 18.6 ± 0.2 % to 64.3 ± 5.7 %. The confirmed synergistic antioxidant activity between grape seed oil and curcumin in emulsions might facilitate the development of specific functional delivery systems in foods.

The role of polysaccharides in improving the functionality of zein coated nanocarriers: Implications for colloidal stability under environmental stresses

Zein has gained popularity over the past few years as an incredible food and bio-based materials. The potential functions and health benefits of zein microcapsules or micro-/nanoparticles in bioactive components delivery, structured emulsion, etc., have received great attention. However, the development has been limited by colloidal destabilization, especially when thermal processing is involved. There is a recent trend in developing zein-polysaccharide complexes (ZPCs), which has tremendously improved the performance of zein-based colloidal carrier systems or emulsions. Increasing our understanding of zein interactions and their contribution to the structure of various macromolecules can help us to develop novel biomaterials that can be used in food, agriculture, biomedicine, and cosmetics. In addition, these nanocarriers are suitable for the encapsulation and delivery of bioactive compounds which have positive perspective in food industry. Therefore, this article aimed to review recent advances in the ZPCs that can be applied to functional or health-promoting foods, with a focus on the characteristics of different ZPCs, factors and mechanisms affecting the stability (especially thermal stability) of these complexes, and their application in food industry as a carrier for BCs. Further, the stability of ZPCs based emulsions under processing and physiological environments, as well some typical effective methods are introduced. Also, the principal challenges and prospects were enumerated and discussed.

Non-covalent interaction between hemp seed globulin and two hemp seed phenolic compounds: Mechanism and effects on protein structure, bioactivity, and in vitro simulated digestion

This study focused on elucidating the non-covalent interactions between hemp seed globulin (GLB) and two hemp seed phenolic compounds, Cannabisin A (CA) and Cannabisin B (CB), and to explore these interactions on the protein's structure, conformation, and functionality. Fluorescence quenching and thermodynamic analysis revealed that static quenching governed non-covalent interaction processes, with hydrogen bonds and van der Waals forces functioning as major forces. This was further substantiated by molecular docking studies. The binding affinity order was CA > CB, indicating that the specific phenolic compound had a notable impact on the binding affinity. Furthermore, when complexed with CA, Tyr and Trp residues were exposed to a more hydrophilic environment than when complexed with CB. It was noted that the complexation with either CA or CB consistently affects GLB's secondary structure, particle size, and ζ-potential. GLB treated with the phenolic compounds exhibited enhanced ABTS and DPPH scavenging activities and improved digestibility compared to untreated GLB. Furthermore, the non-covalent interactions significantly increased CA's water solubility, highlighting GLB as a promising natural carrier for hydrophobic bioactive components. These findings hold potential implications for enhancing hemp seed protein applications within the food industry by positively influencing its functional properties and bioactivity.

Emerging Zein-Bound Zearalenone in Maize: Thermal-Induced Mechanism of Binding or Releasing

The emerging zein-bound zearalenone (ZEN) in maize could affect its nutrition and health. Besides, thermal processing could affect the zein-ZEN interaction, causing the binding or release of ZEN. To control the harm of zein-bound ZEN on the quality of maize, the thermal-induced mechanism of binding or releasing of zein-bound ZEN were studied. Results showed that thermal processing decreased the binding constant from 1.70 to 0.27 × 104 L mol-1, and binding energy from -78.41 to -32.51 kJ mol-1, with the decreased hydrogen bonds, hydrophobic, and electrostatic interactions of ZEN with Leu81 and Arg85, Val125, Ala129, and Gln132. Furthermore, thermal processing destroyed the interactions among zein molecules and caused the unwinding of zein, releasing the ZEN from the hydrophobic cavity of zein. This paper provided theoretic insights into the heat-induced binding/releasing mechanism of ZEN with zein, which helped to perfect the exposure risk evaluation of ZEN (including free and zein-bound ZEN) in maize-based products.

Insights for the control of dried-fruit beetle Carpophilus hemipterus (Nitidulidae) using rosemary essential oil loaded in chitosan nanoparticles

Natural insecticidal products, essentially essential oils and their bioactive compounds are available as an excellent alternative method to control insect pests as well as they are less toxic to human health. However, due to their volatile constituents, encapsulation could be considered as the most suitable solution for their practical application. Therefore, this study aims to explore the insecticidal toxicity of chitosan nanoparticles loaded with Rosmarinus officinalis essential oil against adults of Carpophilus hemipterus. Chitosan nanoparticles were prepared by ionic gelation method with an encapsulation efficiency 41.543.1% and loading capacity 5.24G0.28%. Results revealed that chitosan nanoparticles loaded rosemary oil exhibited interesting insecticidal toxicity towards C. hemipterus adults in stored dates with 50.73% mortality. Overall, this work pointed out that the innovative design method based on chitosan-nanoparticles loaded rosemary oil can be promoted in integrated pest management program for stored date pests.

Amelioration of Acute Alcoholic Liver Injury via Attenuating Oxidative Damage and Modulating Inflammation by Means of Ursodeoxycholic Acid-Zein Nanoparticles

Ursodeoxycholic acid (UDCA) has been broadly adopted for the clinical treatment of hepatic and biliary diseases; however, its poor water-solubility becomes an obstacle in wide applications. To overcome these challenges, herein, a two-tier UDCA-embedded system of zein nanoparticles (NPs) along with a polyelectrolyte complex was designed under facile conditions. Both the UDCA-zein NPs and their inclusion microcapsules showed a spherical shape with a uniform size. A typical wall plus capsule/core structure was formed in which UDCA-zein NPs distributed evenly in the interior. The UDCA inclusion microcapsules had an encapsulation rate of 67% and were released in a non-Fickian or anomalous transport manner. The bioavailability and efficacy of UDCA-zein NPs were assessed in vivo through the alcoholic liver disease (ALD) mouse model via intragastric administration. UDCA-zein NPs ameliorated the symptoms of ALD mice remarkably, which were mainly exerted through attenuation of antioxidant stress levels. Meanwhile, it notably upregulated the intestinal tight junction protein expression and improved and maintained the integrity of the mucosal barrier effectively. Collectively, with the improvement of bioavailability, the UDCA-zein NPs prominently alleviated the oxidative damage induced by alcohol, modulating the inflammation so as to restore ALD. It is anticipated that UDCA-zein NPs have great therapeutic potential as sustained-nanovesicles in ALD treatment.

Green Synthesis of Zein-Based Nanoparticles Encapsulating Lupulone: Antibacterial and Antiphotoaging Agents

Prolonged skin exposure to UV radiation may result in sunburn, with possible inflammatory and oxidative stress to the skin, skin photoaging, photocarcinogenesis, even DNA damage, and apoptosis if sunscreen protection is not used. Due to the advantages that they offer, high encapsulation capability, increased stability of encapsulated bioactive agents, and release control, nanoparticulate materials have been used in sunscreens despite the hazard that they present: their capacity to penetrate the skin causing toxic side effects (especially the chemical sunscreens). The present study reports the preparation of nanoparticulate composites containing only GRAS substances and using an eco-friendly, inexpensive procedure. The ingredients used have properties that are beneficial to the skin. Zein (Z), a prolamin-rich protein from corn, is biodegradable and biocompatible, is a moisture attractor, and shows effective absorption by cells. Lupulone (L), extracted from hops, is an antibacterial and antioxidant agent that has a stimulating effect on the collagen production in the body due to its content of phytohormones. Gum arabic (GA) is a natural glycoprotein used in beverages and cosmetics as an emulsifier/stabilizer. Composite matrices containing Z/GA/L were prepared using a simple method (antisolvent), which replaces the flammable solvent ethanol with aqueous propylene glycol. The nanocomposites were characterized by FTIR, composition, encapsulation efficiency, and loading capacity for L, size, zeta potential, and morphology (SEM). Their biological activity was investigated as well. The zein-based nanoparticles showed antioxidant and antimicrobial effects (even some synergistic, unexpected behavior) and modulatory activity on the matrix metalloproteinase MMP-1. Due to their properties, the nanoparticles discussed herein show potential for use in formulations for the skin, especially for mature skin, replacing chemical substances with potential side effects used typically in topical delivery systems.

Curcumin loaded Zein-alginate nanogels with "core-shell" structure: formation, characterization and simulated digestion

Zein nanoparticles tend to aggregate in water and are readily digested by enzymes in the gastrointestinal tract. In current study, the Zein-alginate nanogels loaded with curcumin (Cur@ZA) were fabricated with the "core-shell" structure. The Zein "core" was prepared via antisolvent precipitation method, and the alginate gel "shell" was formed by calcium-induced gelation method. The physicochemical properties, microstructure, encapsulation efficiency, stability and simulated digestion characteristics of nanogels were investigated. The results showed that Cur@ZA formed uniform gel spheres with small particle size (415.10 nm), while possessing a dense gel shell on the surface. The Zein "core" and alginate gel "shell" of Cur@ZA are tightly bound to each other by electrostatic adsorption, hydrophobic interaction and hydrogen bonding. Curcumin was able to be loaded in the Cur@ZA nanogels with a higher encapsulation rate (>92 %). Compared with the system which was not induced by calcium ion, the addition of calcium ions improved the photostability and thermal stability of curcumin, and facilitated slow and sustained release of curcumin in the simulated digestion. Therefore, this novel nanogel delivery system has the ideal physicochemical properties, stability and control-release ability, which has the potential to be used in the food industry.

Research progress of colon-targeted oral hydrogel system based on natural polysaccharides

The quality of life is significantly impacted by colon-related diseases. There have been a lot of interest in the oral colon-specific drug delivery system (OCDDS) as a potential carrier to decrease systemic side effects and protect drugs from degradation in the upper gastrointestinal tract (GIT). Hydrogels are effective oral colon-targeted drug delivery carriers due to their high biodegradability, substantial drug loading, and great biocompatibility. Natural polysaccharides give the hydrogel system unique structure and function to effectively respond to the complex environment of the GIT and deliver drugs to the colon. In this paper, the physiological factors of colonic drug delivery and the pathological characteristics of common colonic diseases are summarized, and the latest advances in the design, preparation and characterization of natural polysaccharide hydrogels are reviewed, which are expected to provide new references for colon-targeted oral hydrogel systems using natural polysaccharides as raw materials.

Characterization and bio-functional performance of chitosan/poly (vinyl alcohol)/trans-cinnamaldehyde ternary biopolymeric films

Bioactive films of chitosan (CS)/polyvinyl alcohol (PVA)/trans-cinnamaldehyde (CIN) were prepared by co-blending, and the impact of varying concentrations (0.5, 1.0 and 1.5 %) of CIN on the physicochemical properties of the ternary films was investigated. The ATR/FT-IR analysis revealed that the bioactive film is modulated by Schiff base (C=N) and hydrogen-bond interactions of CS, PVA, and CIN. Inclusion of CIN into the film improved mechanical properties with tensile strength increased from 0.5 % (68.52 MPa) to 1.5 % (76.95 MPa). The presence of CIN within the CS/PVA film also remarkably affected oxygen permeability and improved light transmittance. Additionally, the water barrier and contact angle properties were improved with increasing CIN content. The morphology of the CIN-containing films appeared non-stratified and dense when observed by SEM and AFM. Moreover, spore germination and in vitro assays confirmed strong antifungal activity of the CIN-containing film against P. italicum (~90 %) and B. cinerea (~85 %). The ternary films also exhibited excellent antioxidant activity, as evidenced by DPPH radical scavenging activity (31.43 %) and ferric reducing power (OD700 nm = 0.172) at the highest CIN concentration tested. Thus, this bioactive CIN films are proposed as a versatile packaging material for the food industry.

Characterization, stability and antioxidant activity of curcumin nanocomplexes with soy protein isolate and pectin

Curcumin (Cur) has antioxidant, anti-inflammatory and other biological activities, but its poor stability, low water solubility and other defects limit the application. Herein, Cur was nanocomposited with soy isolate protein (SPI) and pectin (PE) for the first time and its characterization, bioavailability and antioxidant activity were discussed. The optimal encapsulation process of SPI-Cur-PE was as follow: the addition amount of PE was 4 mg, Cur was 0.6 mg and at pH of 7. It was observed by SEM that SPI-Cur-PE were partially aggregated. The average particle size of SPI-Cur-PE was 210.1 nm and the zeta potential was -31.99 mV. Through XRD, FT-IR and DSC analysis, the SPI-Cur-PE was formed through hydrophobic interaction and electrostatic interaction. The SPI-Cur-PE released more slowly in simulated gastrointestinal treatment and displayed higher photostability and thermal stability. SPI-Cur-PE, SPI-Cur and free Cur had scavenging activities for 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 1,1-diphenyl-2-picryl-hydrazyl (DPPH) radicals.

Impact of nanotechnology on the oral delivery of phyto-bioactive compounds

Nanotechnology is an advanced field that has remarkable nutraceutical and food applications. Phyto-bioactive compounds (PBCs) play critical roles in promoting health and disease treatment. However, PBCs generally encounter several limitations that delay their widespread application. For example, most PBCs have low aqueous solubility, poor biostability, poor bioavailability, and a lack of target specificity. Moreover, the high concentrations of effective PBC doses also limit their application. As a result, encapsulating PBCs into an appropriate nanocarrier may increase their solubility and biostability and protect them from premature degradation. Moreover, nanoencapsulation could improve absorption and prolong circulation with a high opportunity for targeted delivery that may decrease unwanted toxicity. This review addresses the main parameters, variables, and barriers that control and affect oral PBC delivery. Moreover, this review discusses the potential role of biocompatible and biodegradable nanocarriers in improving the water solubility, chemical stability, bioavailability, and specificity/selectivity of PBCs.

Changes of physicochemical properties and bioactivities of resveratrol-loaded core-shell biopolymer nanoparticles during in vitro gastrointestinal digestion

Resveratrol loaded nanoparticles (nano-resveratrol) containing a zein core surrounded by surfactant (Tween-NPs) or carboxymethyl chitosan (CMCS-NPs) shell were fabricated with different particle sizes, surface charges and colloidal stabilities. Changes of physicochemical properties for the two nano-resveratrols, as well as their antioxidant potentials and cytotoxicity were investigated during a static in vitro gastrointestinal tract (GIT) digestion. Results showed that the Tween-NPs had a much higher bioaccessibility (84.1 ± 19.2%) than that of CMCS-NPs (36.6 ± 4.2%) after the GIT digestion, which was expected due to the steric barrier of the CMCS coating. Both nano-resveratrols could sustained their antioxidant activities after digestion. However, the Tween-NPs had a significantly higher cytotoxicity against MCF-7 cells than CMCS-NPs and free resveratrol, while a reduction in cytotoxicity of Tween-NPs was observed after the digestion. The bioactivities results were well correlated with the physicochemical properties and dissolution of resveratrol under environmental stress.

Enhanced encapsulation of lutein using soy protein isolate nanoparticles prepared by pulsed electric field and pH shifting treatment

In this study, soy protein isolate (SPI) was modified by a pulsed electric field (PEF) combined with pH shifting treatment (10 kV/cm, pH 11) to prepare SPI nanoparticles (PSPI11) for efficient loading of lutein. The results showed that when the mass ratio of SPI to lutein was 25:1, the encapsulation efficiency of lutein in PSPI11 increased from 54% to 77%, and the loading capacity increased by 41% compared to the original SPI. The formed SPI-lutein composite nanoparticles (PSPI11-LUTNPs) had smaller, more homogeneous sizes and larger negative charges than SPI7-LUTNPs. The combined treatment favored the unfolding of the SPI structure and could expose its interior hydrophobic groups to bind with lutein. Nanocomplexation with SPIs significantly improved the solubility and stability of lutein, with PSPI11 showing the greatest improvement. As a result, PEF combined with pH shifting pretreatment is an effective method for developing SPI nanoparticles loaded and protected with lutein.

Impact of molecular weight and deacetylation degree of chitosan on the bioaccessibility of quercetin encapsulated in alginate/chitosan-coated zein nanoparticles

This work aimed at studying the effect of molecular weight (MW) and degree of deacetylation (DD) of chitosan on the quercetin bioaccessibility encapsulated in alginate/chitosan-coated zein nanoparticles (alg/chiZN). The chitosan coating layer produced nanoparticulate systems with good stability parameters, high encapsulation efficiency (EE) and a higher bioaccessibilty of quercetin after in-vitro digestion. By increasing the DD of chitosan, the ζ-potential of the colloidal system significantly increased (≥27.1 mV), while low and very low MW chitosans generated systems with smaller particle sizes (≤ 277.8 nm) and polydispersity index [PDI (0.189)]. The best results, in terms of EE (≥84.44) and bioaccessibility (≥76.70), were obtained when the systems were prepared with low MW chitosan and high DD. Thus, the alg/chiZN nanocapsules may be a promising delivery system for improving the quercetin bioaccessibility or other compounds with a similar chemical nature, especially when higher DD and lower MWs are used.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

Development and Characterization of an Edible Zein/Shellac Composite Film Loaded with Curcumin

The development of functional edible films is promising for the food industry, and improving the water barrier of edible films has been a research challenge in recent years. In this study, curcumin (Cur) was added to zein (Z) and shellac (S) to prepare an edible composite film with a strong water barrier and antioxidant properties. The addition of curcumin significantly reduced the water vapor permeability (WVP), water solubility (WS), and elongation at break (EB), and it clearly improved the tensile strength (TS), water contact angle (WCA), and optical properties of the composite film. The ZS-Cur films were characterized by SEM, FT-IR, XRD, DSC, and TGA; the results indicated that hydrogen bonds were formed among the curcumin, zein, and shellac, which changed the microstructure and improved the thermal stability of the film. A test of curcumin release behavior showed controlled release of curcumin from the film matrix. ZS-Cur films displayed remarkable pH responsiveness, strong antioxidant properties, and inhibitory effects on E. coli. Therefore, the insoluble active food packaging prepared in this study provides a new strategy for the development of functional edible films and also provides a possibility for the application of edible films to extend the shelf life of fresh food.

A comprehensive review of protein-based carriers with simple structures for the co-encapsulation of bioactive agents

The rational design and fabrication of edible codelivery carriers are important to develop functional foods fortified with a plurality of bioactive agents, which may produce synergistic effects in increasing bioactivity and functionality to target specific health benefits. Food proteins possess considerable functional attributes that make them suitable for the delivery of a single bioactive agent in a wide range of platforms. Among the different types of protein-based carriers, protein-ligand nanocomplexes, micro/nanoparticles, and oil-in-water (O/W) emulsions have increasingly attracted attention in the codelivery of multiple bioactive agents, due to the simple and convenient preparation procedure, high stability, matrix compatibility, and dosage flexibility. However, the successful codelivery of bioactive agents with diverse physicochemical properties by using these simple-structure carriers is a daunting task. In this review, some effective strategies such as combined functional properties of proteins, self-assembly, composite, layer-by-layer, and interfacial engineering are introduced to redesign the carrier structure and explore the encapsulation of multiple bioactive agents. It then highlights success stories and challenges in the co-encapsulation of multiple bioactive agents within protein-based carriers with a simple structure. The partition, protection, and release of bioactive agents in these protein-based codelivery carriers are considered and discussed. Finally, safety and application as well as challenges of co-encapsulated bioactive agents in the food industry are also discussed. This work provides a state-of-the-art overview of protein-based particles and O/W emulsions in co-encapsulating bioactive agents, which is essential for the design and development of novel functional foods containing multiple bioactive agents.

Preparation and characterization of novel composite nanoparticles using zein and hyaluronic acid for efficient delivery of naringenin

Hyaluronic acid (HA), a polymer mainly found in animal tissues, plays an important role in food research. In this study, it was used for delivery improvement of naringenin (NAR) by loading it into zein nanoparticles using an anti-solvent precipitation method. The optimal Nar/zein-HA nanoparticles were uniformly spherical with particle sizes of 209.2 ± 1.9 nm, polydispersity indexes of 0.146 ± 0.032 and zeta-potentials of -19.0 ± 0.7 mV. Moreover, the microstructure of Nar/zein-HA nanoparticles was maintained primarily by hydrophobic, electrostatic, and hydrogen-bonding interactions. Furthermore, Nar/zein-HA nanoparticles showed favorable physical stability and enhanced encapsulation efficiency. Additionally, the antioxidant capacity and release in simulated gastrointestinal digestion of Nar were significantly improved. Overall, these findings indicate that the delivery efficiency of Nar was improved by formulation of ternary nanoparticles.

Chitosan/Albumin Coating Factorial Optimization of Alginate/Dextran Sulfate Cores for Oral Delivery of Insulin

The design of nanoparticle formulations composed of biopolymers, that govern the physicochemical properties of orally delivered insulin, relies on improving insulin stability and absorption through the intestinal mucosa while protecting it from harsh conditions in the gastrointestinal (GI) tract. Chitosan/polyethylene glycol (PEG) and albumin coating of alginate/dextran sulfate hydrogel cores are presented as a multilayer complex protecting insulin within the nanoparticle. This study aims to optimize a nanoparticle formulation by assessing the relationship between design parameters and experimental data using response surface methodology through a 3-factor 3-level optimization Box–Behnken design. While the selected independent variables were the concentrations of PEG, chitosan and albumin, the dependent variables were particle size, polydispersity index (PDI), zeta potential, and insulin release. Experimental results showed a nanoparticle size ranging from 313 to 585 nm, with PDI from 0.17 to 0.39 and zeta potential ranging from −29 to −44 mV. Insulin bioactivity was maintained in simulated GI media with over 45% cumulative release after 180 min in a simulated intestinal medium. Based on the experimental responses and according to the criteria of desirability on the experimental region’s constraints, solutions of 0.03% PEG, 0.047% chitosan and 1.20% albumin provide an optimum nanoparticle formulation for insulin oral delivery.

Study on the Structure, Function, and Interface Characteristics of Soybean Protein Isolate by Industrial Phosphorylation

The impacts of industrial phosphorylation on the structural changes, microstructure, functional, and rheological features of soybean protein isolate (SPI) were spotlighted. The findings implied that the spatial structure and functional features of the SPI changed significantly after treatment with the two phosphates. Sodium hexametaphosphate (SHMP) promoted aggregation of SPI with a larger particle size; sodium tripolyphosphate (STP) modified SPI with smaller particle size. SDS-polyacrylamide gel electrophoresis (SDS-PAGE) results showed insignificant alterations in the structure of SPI subunits. Fourier transform infrared (FTIR) and endogenous fluorescence noted a decline in α-helix quantity, an amplification in β-fold quantity, and an increase in protein stretching and disorder, indicating that phosphorylation treatment fluctuated the spatial structure of the SPI. Functional characterization studies showed that the solubility and emulsion properties of the SPI increased to varying degrees after phosphorylation, with a maximum solubility of 94.64% for SHMP-SPI and 97.09% for STP-SPI. Emulsifying activity index (EAI) and emulsifying steadiness index (ESI) results for STP-SPI were better than those for SHMP-SPI. Rheological results showed that the modulus of G' and G″ increased and the emulsion exhibited significant elastic behavior. This affords a theoretical core for expanding the industrial production applications of soybean isolates in the food and various industries.