Biocompatibility studies on polyaniline and polyaniline-silver nanoparticle coated polyurethane composite

Synthesis, Surface Morphology, Gas Sensor, DSC Technique and Third-Order Behavior of Conducting Polymer

The compound polyaniline (Poly-ANI) with different concentrations of (H2SO4) sulfuric acid has been synthesized by the chemical polymerization method. The prepared compounds have been characterized using number of techniques including FTIR, FE-SEM, EDS and DSC. Additionally, UV-Vis spectroscopy employed for studying the linear optical properties of polymer with different acid concentrations. Third order optical nonlinearity was characterized using Z-scan at 532 nm. The results showed that the nonlinear refractive index has a negative sign. It was observed that the nonlinear refractive index changes in different ratios of H2SO4. The high value of nonlinear refractive index ( n 2 ) obtained along Z-axis is 74.62 × 10 - 7 cm2/W, and the corresponding χ 3 is 21.5 × 10-5 esu. Also, the Poly-ANI film shows the response to NH3 gas sensing in the range 20 ppm-250 ppm and can be used for NH3 sensing application.

Polyurethane degradation by extracellular urethanase producing bacterial isolate Moraxella catarrhalis strain BMPPS3

Plastic waste has become a global issue and a threat to the ecosystem. The present study isolated polyurethane (PU) degrading bacterial species from soil dumped with plastic wastes. Four bacterial isolates, RS1, RS6, RS9 and RS13 were obtained and their ability to degrade PU in a synthetic medium with PU as a sole source of carbon was assessed individually. After thirty days of incubation, the highest PU weight loss of 67.36 ± 0.32% was recorded in the medium containing RS13 isolate. The results of FTIR revealed the occurrence of carbonyl peaks. The putative isolate RS13 confirmed with the genus Moraxella according to 16S rRNA gene sequencing and the isolate was specified as Moraxella catarrhalis strain BMPPS3. The restriction analysis of Moraxella catarrhalis strain BMPPS3 revealed that the GCAT content to 51% and 49% correspondingly. Moraxella catarrhalis strain BMPPS3 was able to colonize on PU surface and form a biofilm as revealed by SEM investigation. Fatty acids and alkanes were found to be the degradation products by GC-MS analysis. The presence of these metabolites facilitated the growth of strain RS13 and suggested that ester hydrolysis products had been mineralized into CO2 and H2O. Extracellular biosurfactant synthesis has also been found in Moraxella catarrhalis strain BMPPS13 inoculated with synthetic media and mineral salt media containing PU and glucose as carbon sources, respectively with a significant level of cell-surface hydrophobicity (32%). The production and activity of extracellular esterase showed consistent increase from day 1-15 which peaked (1.029 mM/min/mg) on day 24 significantly at P < 0.001. Crude biosurfactants were lipopeptide-based, according to the characteristic investigation. According to this study findings, Moraxella catarrhalis produces biosurfactants of the esterase, urethanase and lipase (lipopeptide) types when carbon source PU is present.

Silver nanoparticles with plasma-polymerized hexamethyldisiloxane coating on 3D printed substrates are non-cytotoxic and effective against respiratory pathogens

Due to the emerging resistance of microorganisms and viruses to conventional treatments, the importance of self-disinfecting materials is highly increasing. Such materials could be silver or its nanoparticles (AgNPs), both of which have been studied for their antimicrobial effect. In this study, we compared the biological effects of AgNP coatings with and without a plasma-polymerized hexamethyldisiloxane (ppHMDSO) protective film to smooth silver or copper coatings under three ambient conditions that mimic their potential medical use (dry or wet environments and an environment simulating the human body). The coatings were deposited on 3D printed polylactic acid substrates by DC magnetron sputtering, and their surface morphology was visualized using scanning electron microscopy. Cytotoxicity of the samples was evaluated using human lung epithelial cells A549. Furthermore, antibacterial activity was determined against the Gram-negative pathogenic bacterium Pseudomonas aeruginosa PAO1 and antiviral activity was assessed using human rhinovirus species A/type 2. The obtained results showed that overcoating of AgNPs with ppHMDSO creates the material with antibacterial and antiviral activity and at the same time without a cytotoxic effect for the surrounding tissue cells. These findings suggest that the production of 3D printed substrates coated with a layer of AgNPs-ppHMDSO could have potential applications in the medical field as functional materials.

Biological Effects, Applications and Design Strategies of Medical Polyurethanes Modified by Nanomaterials

Polyurethane (PU) has wide application and popularity as medical apparatus due to its unique structural properties relationship. However, there are still some problems with medical PUs, such as a lack of functionality, insufficient long-term implantation safety, undesired stability, etc. With the rapid development of nanotechnology, the nanomodification of medical PU provides new solutions to these clinical problems. The introduction of nanomaterials could optimize the biocompatibility, antibacterial effect, mechanical strength, and degradation of PUs via blending or surface modification, therefore expanding the application range of medical PUs. This review summarizes the current applications of nano-modified medical PUs in diverse fields. Furthermore, the underlying mechanisms in efficiency optimization are analyzed in terms of the enhanced biological and mechanical properties critical for medical use. We also conclude the preparation schemes and related parameters of nano-modified medical PUs, with discussions about the limitations and prospects. This review indicates the current status of nano-modified medical PUs and contributes to inspiring novel and appropriate designing of PUs for desired clinical requirements.

Towards the translation of electroconductive organic materials for regeneration of neural tissues

Carbon-based conductive and electroactive materials (e.g., derivatives of graphene, fullerenes, polypyrrole, polythiophene, polyaniline) have been studied since the 1970s for use in a broad range of applications. These materials have electrical properties comparable to those of commonly used metals, while providing other benefits such as flexibility in processing and modification with biologics (e.g., cells, biomolecules), to yield electroactive materials with biomimetic mechanical and chemical properties. In this review, we focus on the uses of these electroconductive materials in the context of the central and peripheral nervous system, specifically recent studies in the peripheral nerve, spinal cord, brain, eye, and ear. We also highlight in vivo studies and clinical trials, as well as a snapshot of emerging classes of electroconductive materials (e.g., biodegradable materials). We believe such specialized electrically conductive biomaterials will clinically impact the field of tissue regeneration in the foreseeable future. STATEMENT OF SIGNIFICANCE: This review addresses the use of conductive and electroactive materials for neural tissue regeneration, which is of significant interest to a broad readership, and of particular relevance to the growing community of scientists, engineers and clinicians in academia and industry who develop novel medical devices for tissue engineering and regenerative medicine. The review covers the materials that may be employed (primarily focusing on derivatives of fullerenes, graphene and conjugated polymers) and techniques used to analyze materials composed thereof, followed by sections on the application of these materials to nervous tissues (i.e., peripheral nerve, spinal cord, brain, optical, and auditory tissues) throughout the body.

Carboxylic acid-tethered polyaniline as a generic immobilization matrix for electrochemical bioassays

Polyaniline (PANI) was functionalized by thiol-ene click chemistry to obtain carboxylic acid-tethered polyaniline (PCOOH). The versatility of PCOOH as an immobilization matrix was demonstrated by constructing four different biosensors for detection of metabolites and cancer biomarker. Immobilization efficiency of PCOOH was investigated by surface plasmon resonance and fluorescence microscopic analysis which revealed dense immobilization of biomolecules on PCOOH as compared to conventional PANI. A sandwich electrochemical biosensor was constructed using PCOOH for detection of liver cancer biomarker, α-fetoprotein (AFP). The sensor displayed sensitivity of 15.24 µA (ng mL^-1)^-1 cm^-2, with good specificity, reproducibility (RSD 3.4%), wide linear range (0.25-40 ng mL^-1) at - 0.1 V (vs. Ag/AgCl), and a low detection limit of 2 pg mL^-1. The sensor was validated by estimating AFP in human blood serum samples where the AFP concentrations obtained are consistent with the values estimated using ELISA. Furthermore, utilization of PCOOH for construction of enzymatic biosensor was demonstrated by covalent immobilization of glucose oxidase, uricase, and horseradish peroxidase (HRP) for detection of glucose, uric acid, and H₂O₂, respectively. The biosensors displayed reasonable sensitivity (50, 148, 127 µA mM^-1 cm^-2), and linear ranges (0.1-5, 0.1-6, 0.1-7 mM) with a detection limit of 10, 1, and 8 µM for glucose, uric acid, and H₂O₂, respectively. The present study demonstrates the capability of PCOOH to support and enable oxidation of H₂O₂ generated by oxidase enzymes as well as HRP enzyme catalyzed reduction of H₂O₂. Thus, PCOOH offers a great promise as an immobilization matrix for development of high-performance biosensors to quantify a variety of other disease biomarkers. Carboxylic acid-tethered polyaniline synthesized by thiol-ene click chemistry was used as matrix to construct four different electrochemical biosensors for detection of cancer biomarker α-fetoprotein, glucose, uric acid, and H₂O₂.

Aniline-co-o-anthranilic Acid Copolymer-Chitosan/Ag@AgCl Nanohybrid as a Carrier for (E)-N'-(Pyridin-2-ylmethylene) Hydrazinecarbothiohydrazide Release and Antimicrobial Activity

Poly(aniline-co-o-anthranilic acid)-chitosan/silver@silver chloride (PAAN-CS/Ag@AgCl) nanohybrids were synthesized using different ratios of Ag@AgCl through a facile one-step process. The presence of CS led to the formation of the nanohybrid structure and prevented the aggregation of the copolymer efficiently. The synthesized nanohybrids were fully characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis. (E)-N'-(Pyridin-2-ylmethylene) hydrazinecarbothiohydrazide I was prepared using thiosemicarbazide and confirmed by ¹H-NMR, ¹³C-NMR, and FTIR analyses. Loading of the azine derivative I using various concentrations at different pH values onto the nanohybrid was followed by UV-vis spectroscopy. Langmuir and Freundlich adsorption isotherm models were used to describe the equilibrium isotherm, and the adsorption followed the Langmuir adsorption isotherm. A pseudo-second-order model was used to describe the kinetic data. A PAAN-CS/Ag@AgCl nanohybrid loaded with azine I interestingly showed efficient antimicrobial activity against Escherichia coli and Staphylococcus aureus more than the azine derivative I. The release of azine I at different pH values (2-7.4) was investigated and the kinetics of release were studied using zero-order, first-order, second-order, Higuchi, Hixson-Crowell, and Korsmeyer-Peppas equations.

Preparations, Properties, and Applications of Polyaniline and Polyaniline Thin Films-A Review

Polyaniline (PANI) is a famous conductive polymer, and it has received tremendous consideration from researchers in the field of nanotechnology for the improvement of sensors, optoelectronic devices, and photonic devices. PANI is doped easily by different acids and dopants because of its easy synthesis and remarkable environmental stability. This review focuses on different preparation processes of PANI thin film by chemical and physical methods. Several features of PANI thin films, such as their magnetic, redox, and antioxidant, anti-corrosion, and electrical and sensing properties, are discussed in this review. PANI is a highly conductive polymer. Given its unique properties, easy synthesis, low cost, and high environmental stability in various applications such as electronics, drugs, and anti-corrosion materials, it has attracted extensive attention. The most important PANI applications are briefly reviewed at the end of this review.

Dye Separation and Antibacterial Activities of Polyaniline Thin Film-Coated Poly(phenyl sulfone) Membranes

We fabricated a nanofiltration membrane consisting of a polyaniline (PANI) film on a polyphenylsulfone (PPSU) substrate membrane. The PANI film acted as a potent separation enhancer and antimicrobial coating. The membrane was analyzed via scanning electron microscopy and atomic force microscopy to examine its morphology, topography, contact angle, and zeta potential. We aimed to investigate the impact of the PANI film on the surface properties of the membrane. Membrane performance was then evaluated in terms of water permeation and rejection of methylene blue (MB), an organic dye. Coating the PPSU membrane with a PANI film imparted significant advantages, including finely tuned nanometer-scale membrane pores and tailored surface properties, including increased hydrophilicity and zeta potential. The PANI film also significantly enhanced separation of the MB dye. The PANI-coated membrane rejected over 90% of MB with little compromise in membrane permeability. The PANI film also enhanced the antimicrobial activity of the membrane. The bacteriostasis (B R) values of PANI-coated PPSU membranes after six and sixteen hours of incubation with Escherichia coli were 63.5% and 95.2%, respectively. The B R values of PANI-coated PPSU membranes after six and sixteen hours of incubation with Staphylococcus aureus were 70.6% and 88.0%, respectively.

Synthesis, Characterization, and Biological Activity of Aminated Zymosan

Zymosan (ZM), a naturally occurring insoluble macromolecule obtained from the cell wall of Saccharomyces cerevisiae, is used as a functional food (as dietary fiber), phagocytic stimulus, and immune potentiator. The present study aimed to increase its solubility and evaluate its immunological application. ZM was converted into soluble 6-amino-6-deoxy-β-(1-3)-glucan of a molecular weight of 296 kDa by reduction. Detailed structural characterization of aminated ZM was determined by Fourier transform infrared spectroscopy and two-dimensional NMR analysis (2D, COSY, TOCSY, ROSEY, NOSEY, and HSQC). Aminated ZM was biocompatible with Raw 264.7 macrophage cell lines up to a concentration of 100 μg/mL. Rhodamine tagging revealed that the aminated ZM microparticles were found localized within the nucleus of Raw 264.7 cells. Both native and aminated ZM showed a similar expression pattern of inflammatory genes in Raw 264.7.

Effect of structural factors on the physicochemical properties of functionalized polyanilines

This review discusses the physical and physicochemical properties of polyaniline (PANI) derivatives. The most important methods for the preparation of functionalized polyanilines are presented. The presence of various substituents in its structure changes the polymer characteristics significantly due to steric and electronic effects of the functional groups. This review describes the relationship between the properties of functionalized polyanilines depending on the nature, number and position of the substituents at the aromatic ring.

Effects of different polyaniline emeraldine compositions in electrodepositing ginsenoside encapsulated poly(lactic-co-glycolic acid) microcapsules coating: Physicochemical characterization and in vitro evaluation

Even though drug-eluting stent (DES) has prominently reduced restenosis, however, its complication of delayed endothelialization has caused chronic side effect. A coating of ginseng-based biodegradable polymer could address this issue due to its specific therapeutic values. However, deposition of this type of stable coating on metallic implant often scarce. Therefore, in this study, different polyaniline (PANI) emeraldine compositions were adopted to electrodeposit ginsenoside encapsulated poly(lactic-co-glycolic acid) microcapsules coating. The coating surfaces were analyzed using attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, contact angle, and atomic force microscopy instruments. A month coating stability was then investigated with an evaluation of in vitro human umbilical vein endothelial cell analyses consisted of cytotoxicity and cells attachment assessments. The 1.5 mg PANI emeraldine has assisted the formation of stable, uniform, and rounded microcapsules coating with appropriate wettability and roughness. Less than 1.5 mg PANI emeraldine was not enough to drive the formation of microcapsules coating while greater than 1.5 mg caused the deposition of melted microcapsules. The similar coating also has promoted greater cells proliferation and attachment compared to other coating variation. Therefore, the utilization of electrodeposition to deposit a drug-based polymer coating could be implemented to develop DES, in accordance to stent implantation which ultimately aims for enrich endothelialization.

Cyclic β-(1, 2)-glucan blended poly DL lactic co glycolic acid (PLGA 10:90) nanoparticles for drug delivery

Our group had previously reported the encapsulation efficiency of cyclic β-(1, 2)-glucan for various drugs. The current study is aimed at evaluating the use of glucan as a drug carrier system by blending with poly lactic-co- glycolic acid (L:G = 10:90). Nanoparticles of glucan (0.5, 5, 10 and 20 wt %) blended with PLGA and gentamicin were synthesized. Encapsulation efficiency was higher for the blends (93% with 20 wt % of glucan) than the PLGA alone (79.8%). The presence of glucan enhanced both the biodegradability, and biocompatibility of PLGA. Degradation of the nanoparticles in vitro, was autocatalytic with an initial burst release of active drug and the release profile was modeled using the Korsmeyer-Peppas scheme. In vivo studies indicated that the drug released from the blends had high volume of distribution, and greater clearance from the system. Pharmacokinetics of the drug was predicted using a double exponential decay model. Blending with PLGA improved the drug release characteristics of the cyclic β-(1, 2)-glucan.

Direct grafting of tetraaniline via perfluorophenylazide photochemistry to create antifouling, low bio-adhesion surfaces

Conjugated polyaniline has shown anticorrosive, hydrophilic, antibacterial, pH-responsive, and pseudocapacitive properties making it of interest in many fields. However, in situ grafting of polyaniline without harsh chemical treatments is challenging. In this study, we report a simple, fast, and non-destructive surface modification method for grafting tetraaniline (TANI), the smallest conjugated repeat unit of polyaniline, onto several materials via perfluorophenylazide photochemistry. The new materials are characterized by nuclear magnetic resonance (NMR) and electrospray ionization (ESI) mass spectroscopy. TANI is shown to be covalently bonded to important carbon materials including graphite, carbon nanotubes (CNTs), and reduced graphene oxide (rGO), as confirmed by transmission electron microscopy (TEM). Furthermore, large area modifications on polyethylene terephthalate (PET) films through dip-coating or spray-coating demonstrate the potential applicability in biomedical applications where high transparency, patternability, and low bio-adhesion are needed. Another important application is preventing biofouling in membranes for water purification. Here we report the first oligoaniline grafted water filtration membranes by modifying commercially available polyethersulfone (PES) ultrafiltration (UF) membranes. The modified membranes are hydrophilic as demonstrated by captive bubble experiments and exhibit extraordinarily low bovine serum albumin (BSA) and Escherichia coli adhesions. Superior membrane performance in terms of flux, BSA rejection and flux recovery after biofouling are demonstrated using a cross-flow system and dead-end cells, showing excellent fouling resistance produced by the in situ modification.

Blending Electronics with the Human Body: A Pathway toward a Cybernetic Future

At the crossroads of chemistry, electronics, mechanical engineering, polymer science, biology, tissue engineering, computer science, and materials science, electrical devices are currently being engineered that blend directly within organs and tissues. These sophisticated devices are mediators, recorders, and stimulators of electricity with the capacity to monitor important electrophysiological events, replace disabled body parts, or even stimulate tissues to overcome their current limitations. They are therefore capable of leading humanity forward into the age of cyborgs, a time in which human biology can be hacked at will to yield beings with abilities beyond their natural capabilities. The resulting advances have been made possible by the emergence of conformal and soft electronic materials that can readily integrate with the curvilinear, dynamic, delicate, and flexible human body. This article discusses the recent rapid pace of development in the field of cybernetics with special emphasis on the important role that flexible and electrically active materials have played therein.

Characterization and in vitro Biocompatibility of Binary Mixtures of Chitosan and Polyurethanes Synthesized from Chemically Modified Castor Oil, as Materials for Medical Use

This study aimed to evaluate the effect of the incorporation of chitosan into polyurethane matrices synthesized from chemically modified castor (Ricinus communis) oil by transesterification with pentaerythritol. An additional aim of this study was to determine the degree of acceptance as a biomaterial (obtained from renewable sources), based on the analysis of its mechanical properties (stress/rupture strain), hydrophilic character (contact angle), morphology (SEM) and in vitro compatibility of polyurethanes when in contact with mouse fibroblast L929 cells. No significant changes in mechanical properties were observed with the addition of chitosan to polyurethanes synthesized from chemically modified castor oil. All polyurethane formulas showed morphological changes with increased chitosan concentration. As chitosan/polyurethane binary mixtures do not present a cytotoxicity risk for L929 mouse fibroblasts and possess similar mechanical properties to soft and cardiovascular tissues, their use as a biomedical material is suggested.

Intrinsically Conductive Polymer Nanocomposites for Cellular Applications

Intrinsically conductive polymer nanocomposites have a remarkable potential for cellular applications such as biosensors, drug delivery systems, cell culture systems and tissue engineering biomaterials. Intrinsically conductive polymers transmit electrical stimuli between cells, and induce regeneration of electroactive tissues such as muscle, nerve, bone and heart. However, biocompatibility and processability are common issues for intrinsically conductive polymers. Conductive polymer composites are gaining importance for tissue engineering applications due to their excellent mechanical, electrical, optical and chemical functionalities. Here, we summarize the different types of intrinsically conductive polymers containing electroactive nanocomposite systems. Cellular applications of conductive polymer nanocomposites are also discussed focusing mainly on poly(aniline), poly(pyrrole), poly(3,4-ethylene dioxythiophene) and poly(thiophene).

Engineering Biodegradable and Biocompatible Bio-ionic Liquid Conjugated Hydrogels with Tunable Conductivity and Mechanical Properties

Conventional methods to engineer electroconductive hydrogels (ECHs) through the incorporation of conductive nanomaterials and polymers exhibit major technical limitations. These are mainly associated with the cytotoxicity, as well as poor solubility, processability, and biodegradability of their components. Here, we describe the engineering of a new class of ECHs through the functionalization of non-conductive polymers with a conductive choline-based bio-ionic liquid (Bio-IL). Bio-IL conjugated hydrogels exhibited a wide range of highly tunable physical properties, remarkable in vitro and in vivo biocompatibility, and high electrical conductivity without the need for additional conductive components. The engineered hydrogels could support the growth and function of primary cardiomyocytes in both two dimentinal (2D) and three dimensional (3D) cultures in vitro. Furthermore, they were shown to be efficiently biodegraded and possess low immunogenicity when implanted subcutaneously in rats. Taken together, our results suggest that Bio-IL conjugated hydrogels could be implemented and readily tailored to different biomedical and tissue engineering applications.

Innovative Self-Cleaning and Biocompatible Polyester Textiles Nano-Decorated with Fe-N-Doped Titanium Dioxide

The development of innovative technologies to modify natural textiles holds an important impact for medical applications, including the prevention of contamination with microorganisms, particularly in the hospital environment. In our study, Fe and N co-doped TiO₂ nanoparticles have been obtained via the hydrothermal route, at moderate temperature, followed by short thermal annealing at 400 °C. These particles were used to impregnate polyester (PES) materials which have been evaluated for their morphology, photocatalytic performance, antimicrobial activity against bacterial reference strains, and in vitro biocompatibility on human skin fibroblasts. Microscopic examination and quantitative assays have been used to evaluate the cellular morphology and viability, cell membrane integrity, and inflammatory response. All treated PES materials specifically inhibited the growth of Gram-negative bacilli strains after 15 min of contact, being particularly active against Pseudomonas aeruginosa. PES fabrics treated with photocatalysts did not affect cell membrane integrity nor induce inflammatory processes, proving good biocompatibility. These results demonstrate that the treatment of PES materials with TiO₂-1% Fe–N particles could provide novel biocompatible fabrics with short term protection against microbial colonization, demonstrating their potential for the development of innovative textiles that could be used in biomedical applications for preventing patients’ accidental contamination with microorganisms from the hospital environment.

Effect of the incorporation of chitosan on the physico-chemical, mechanical properties and biological activity on a mixture of polycaprolactone and polyurethanes obtained from castor oil

In the present study, polyurethane materials were obtained from castor oil, polycaprolactone and isophorone diisocyanate by incorporating different concentrations of chitosan (0.5, 1.0 and 2.0% w/w) as an additive to improve the mechanical properties and the biological activity of polyurethanes. The polyurethanes were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, stress/strain fracture tests and swelling analysis, and the hydrophilic character of the surface was determined by contact angle trials. The objectives of the study were to evaluate the effect of the incorporation of chitosan on the changes of the physico-chemical and mechanical properties and the in vitro biological activity of the polyurethanes. It was found that the incorporation of chitosan enhances the ultimate tensile strength of the polyurethanes and does not affect the strain at fracture in polyurethanes with 5% w/w of polycaprolactone and concentrations of chitosan ranging from 0 to 2% w/w. In addition, PCL5-Q-PU formulations and their degradation products did not affect cell viability of L929 mouse fibroblast and 3T3, respectively. Polyurethane formulations showed antibacterial activities against Staphylococcus aureus and Escherichia coli bacteria. The results of this study have highlighted the potential biomedical application of this polyurethanes related to soft and cardiovascular tissues.

Photocatalytic, Antimicrobial and Biocompatibility Features of Cotton Knit Coated with Fe-N-Doped Titanium Dioxide Nanoparticles

Our research was focused on the evaluation of the photocatalytic and antimicrobial properties, as well as biocompatibility of cotton fabrics coated with fresh and reused dispersions of nanoscaled TiO₂-1% Fe-N particles prepared by the hydrothermal method and post-annealed at 400 °C. The powders were characterized by X-ray diffraction (XRD), Mössbauer spectroscopy and X-ray photoelectron spectroscopy. The textiles coated with doped TiO₂ were characterized by scanning electron microscopy and energy dispersive X-ray analyses, and their photocatalytic effect by trichromatic coordinates of the materials stained with methylene blue and coffee and exposed to UV, visible and solar light. The resulting doped TiO₂ consists of a mixture of prevailing anatase phase and a small amount (~15%-20%) of brookite, containing Fe³⁺ and nitrogen. By reusing dispersions of TiO₂-1% Fe-N, high amounts of photocatalysts were deposited on the fabrics, and the photocatalytic activity was improved, especially under visible light. The treated fabrics exhibited specific antimicrobial features, which were dependent on their composition, microbial strain and incubation time. The in vitro biocompatibility evaluation on CCD-1070Sk dermal fibroblasts confirmed the absence of cytotoxicity after short-term exposure. These results highlight the potential of TiO₂-1% Fe-N nanoparticles for further use in the development of innovative self-cleaning and antimicrobial photocatalytic cotton textiles. However, further studies are required in order to assess the long-term skin exposure effects and the possible particle release due to wearing.

Adhesion, Proliferation and Migration of NIH/3T3 Cells on Modified Polyaniline Surfaces

Polyaniline shows great potential and promises wide application in the biomedical field thanks to its intrinsic conductivity and material properties, which closely resemble natural tissues. Surface properties are crucial, as these predetermine any interaction with biological fluids, proteins and cells. An advantage of polyaniline is the simple modification of its surface, e.g., by using various dopant acids. An investigation was made into the adhesion, proliferation and migration of mouse embryonic fibroblasts on pristine polyaniline films and films doped with sulfamic and phosphotungstic acids. In addition, polyaniline films supplemented with poly (2-acrylamido-2-methyl-1-propanesulfonic) acid at various ratios were tested. Results showed that the NIH/3T3 cell line was able to adhere, proliferate and migrate on the pristine polyaniline films as well as those films doped with sulfamic and phosphotungstic acids; thus, utilization of said forms in biomedicine appears promising. Nevertheless, incorporating poly (2-acrylamido-2-methyl-1-propanesulfonic) acid altered the surface properties of the polyaniline films and significantly affected cell behavior. In order to reveal the crucial factor influencing the surface/cell interaction, cell behavior is discussed in the context of the surface energy of individual samples. It was clearly demonstrated that the lesser the difference between the surface energy of the sample and cell, the more cyto-compatible the surface is.

Investigation of Industrial Polyurethane Foams Modified with Antimicrobial Copper Nanoparticles

Antimicrobial copper nanoparticles (CuNPs) were electrosynthetized and applied to the controlled impregnation of industrial polyurethane foams used as padding in the textile production or as filters for air conditioning systems. CuNP-modified materials were investigated and characterized morphologically and spectroscopically, by means of Transmission Electron Microscopy (TEM), and X-ray Photoelectron Spectroscopy (XPS). The release of copper ions in solution was studied by Electro-Thermal Atomic Absorption Spectroscopy (ETAAS). Finally, the antimicrobial activity of freshly prepared, as well as aged samples—stored for two months—was demonstrated towards different target microorganisms.

The preparation of metal-organic frameworks and their biomedical application

The development of a safe and targetable drug carrier is a major challenge. An efficient delivery system should protect cargo from degradation and cleanup, and control of drug release in the target site. Metal–organic frameworks (MOFs), consisting of metal ions and a variety of organic ligands, have been applied for drug delivery due to their distinct structure. In this review, we summarized the synthesis strategies of MOFs, especially emphasizing the methods of pore creation in frameworks, which were based on recent literatures. Subsequently, the controlled size, biocompatibility, drug releasing performances, and imaging of MOFs were discussed, which would pave the road for the application in drug-delivery systems.

Nanoparticles vs. biofilms: a battle against another paradigm of antibiotic resistance

Microbes form surface-adherent community structures called biofilms and these biofilms play a critical role in infection.

Polymer/metal nanocomposites for biomedical applications

Polymer/metal nanocomposites consisting of polymer as matrix and metal nanoparticles as nanofiller commonly show several attractive advantages such as electrical, mechanical and optical characteristics. Accordingly, many scientific and industrial communities have focused on polymer/metal nanocomposites in order to develop some new products or substitute the available materials. In the current paper, characteristics and applications of polymer/metal nanocomposites for biomedical applications are extensively explained in several categories including strong and stable materials, conductive devices, sensors and biomedical products. Moreover, some perspective utilizations are suggested for future studies.

Chemically Driven, Water-Soluble Composites of Carbon Nanotubes and Silver Nanoparticles as Stretchable Conductors

In the past decade, hybrid materials for highly stretchable, conductive electrodes have received tremendous attention in the fields of emerging wearable electronic, optoelectronic, and sensing devices. Here, we present a previously unrecognized aqueous route to producing stretchable conductors composed of silver nanoparticles (AgNPs) and single-walled carbon nanotubes (SWNTs) embedded in a polyurethane (PU) matrix, in contrast to ones dispersed in toxic organic solvents reported to date. The intact chemical interaction between one-dimensional SWNTs, for endowing the capability of establishing conductive pathways even in stretching conditions, and AgNPs, for enabling high conductivity of the composites, is achieved in an aqueous medium with an anionic polyelectrolyte, poly(acrylic acid), that undergoes pH-dependent conformational evolution. With this aqueous approach, we demonstrate that AgNP-SWNT-PU composites supported on PDMS substrates have the conductivities of 620 and 120 S cm^-1 in unstrained and 90% elongated conditions, respectively, and display repeatable reversibility at a strain of 60%.

Review: physico-chemical modification as a versatile strategy for the biocompatibility enhancement of biomaterials

Physico-chemical modification induced improvement in biocompatibility of materials.

A novel nanotube-shaped polypyrrole–Pd composite prepared using reverse microemulsion polymerization and its evaluation as an antibacterial agent

A nanotube-shaped PPy–Pd composite, as an antibacterial agent, was prepared using a unique combination of green synthesis and a microemulsion method.

Probing extracellular acidity of live cells in real time for cancer detection and monitoring anti-cancer drug activity

A multifunctional platform is presented which (a) allows determination of extracellular pH in real time, (b) detects cancer cells, down to 5 cells, and (c) enables evaluating the efficacy of glycolysis inhibiting drugs.

Immobilization of trypsin on plasma prepared Ag/PPAni nanocomposite film for efficient digestion of protein

This work demonstrates the efficacy of a support matrix prepared by plasma process for trypsin immobilization without any surface activator. Plasma polymerization cum sputtering process is used to prepare the nanocomposite support matrix. Plasma sputtered silver nanoparticles (AgNPs) are uniformly embedded into plasma polymerized aniline (PPAni) film. Various characterization tools are employed to study the surface morphology, microstructure and chemical composition of the support matrices. Trypsin is immobilized onto the support matrix via the formation of covalent bond between them. Plasma generated free radicals on composite films activate the support matrix and make it efficient for increasing the tertiary enzyme stability via multipoint covalent attachment. Trypsin immobilized onto Ag/PPAni matrix has more hydrolyzing capacity of bovine serum albumin (BSA) than free trypsin as well as trypsin immobilized onto PPAni films.