Electrochemical determination of atropine at multi-wall carbon nanotube electrode based on the enhancement effect of sodium dodecyl benzene sulfonate

3D-printed electrochemical cells with laser engraving: developing portable electroanalytical devices for forensic applications

A new electrochemical device fabricated by the combination of 3D printing manufacturing and laser-generated graphene sensors is presented. Cell and electrodes were 3D printed by the fused deposition modeling (FDM) technique employing acrylonitrile butadiene styrene filament (insulating material that composes the cell) and conductive filament (lab-made filament based on graphite dispersed into polylactic acid matrix) to obtain reference and auxiliary electrodes. Infrared-laser engraved graphene, also reported as laser-induced graphene (LIG), was produced by laser conversion of a polyimide substrate, which was assembled in the 3D-printed electrochemical cell that enables the analysis of low volumes (50-2000 μL). XPS analysis revealed the formation of nitrogen-doped graphene multilayers that resulted in excellent electrochemical sensing properties toward the detection of atropine (ATR), a substance that was found in beverages to facilitate sexual assault and other criminal acts. Linear range between 5 and 35 μmol L-1, detection limit of 1 μmol L-1, and adequate precision (RSD = 4.7%, n = 10) were achieved using differential-pulse voltammetry. The method was successfully applied to beverage samples with recovery values ranging from 80 to 105%. Interference studies in the presence of species commonly found in beverages confirmed satisfactory selectivity for ATR sensing. The devices proposed are useful portable analytical tools for on-site applications in the forensic scenario.

A novel atropine electrochemical sensor based on silver nano particle-coated Spirulina platensis multicellular blue-green microalga

In this work, Atropine as the anticholinergic drug was measured using the environmentally friendly sensor. In this regard, Self-cultivated Spirulina platensis with electroless silver was employed as a powder amplifier in carbon paste electrode modification. Also, 1-Hexyl-3 methylimidazolium Hexafluorophosphate (HMIM PF₆) ion liquid as a conductor binder was used in the suggested electrode construction. Atropine determination was investigated by voltammetry methods. According to voltammograms, the electrochemical behavior of atropine depends on pH, and pH 10.0 was used as the optimal condition. Moreover, the diffusion control process for the electro-oxidation of atropine was verified by the scan rate study, so the diffusion coefficient (D∼ 3.0136×10^-4cm²/sec) value was computed from the chronoamperometry study. Furthermore, responses of the fabricated sensor were linear in the concentration range from 0.01 to 800 μM, and the lowest detection limit of the Atropine determination was obtained at 5 nM. Moreover, the stability, reproducibility, and selectivity factors of the suggested sensor were confirmed by the results. Finally, the recovery percentages for atropine sulfate ampoule (94.48-101.58), and water (98.01-101.3) approve of the applicability of the proposed sensor to Atropine determination in real samples.

Monitoring of atropine anticholinergic drug using voltammetric sensor amplified with NiO@Pt/SWCNTs and ionic liquid

In this work, the synergic impact of 1-ethyl-3-methylimidazolium methyl sulfate (EMMS) and NiO doped Pt decorated SWCNTs (NiO@Pt/SWCNTs) in carbon paste matrix was examined as an analytical tool for investigating electrochemical behavior of atropine. The voltammetric results revealed that NiO@Pt/SWCNTs/EMMS/CPE exhibited an excellent electrocatalytic activity towards redox reaction of atropine in aqueous solution pH = 10.0. The NiO@Pt/SWCNTs/EMMS/CPE offered the best electro-analytical conditions for monitoring of atropine in the concentration range of 4.0 nM-220 μM with an increase in oxidation current about 5.93 times. On the other hand, NiO@Pt/SWCNTs/EMMS/CPE displayed a long time stability (about 60 days) for monitoring of atropine. The ability of NiO@Pt/SWCNTs/EMMS/CPE as an electroanalytical tool for monitoring of atropine was investigated, and the recovery range was detected as to be 97.6%-104.25% for this goal.

Performance of graphene-zinc oxide nanocomposite coated-glassy carbon electrode in the sensitive determination of para-nitrophenol

Graphene: zinc oxide nanocomposite (GN:ZnO NC) platform was tried for the sensitive determination of para-nitrophenol (p-NP) through the electrochemical method. ZnO nanoparticles (NPs) were synthesized by the modified wet-chemical method where in potassium hydroxide and zinc nitrate were used as precursors and starch as a stabilizing agent. A green and facile approach was applied to synthesize GN:ZnO NC in which glucose was employed as a reductant to reduce graphene-oxide to graphene in the presence of ZnO NPs. The synthesized NC was characterized using scanning and high-resolution transmission electron microscopy, energy dispersive x-ray analysis, X-ray diffraction and Raman spectroscopic techniques to examine the crystal phase, crystallinity, morphology, chemical composition and phase structure. GN:ZnO NC layer deposited over the glassy carbon electrode (GCE) was initially probed for its electrochemical performance using the standard 1 mM K3[Fe(CN)6] model complex. GN:ZnO NC modified GCE was monitored based on p-NP concentration. An enhanced current response was observed in 0.1 M phosphate buffer of pH 6.8 for the determination of p-NP in a linear working range of 0.09 × 10-6 to 21.80 × 10-6 M with a lower detection limit of 8.8 × 10-9 M employing square wave adsorptive stripping voltammetric technique at a deposition-potential and deposition-time of - 1.0 V and 300 s, respectively. This electrochemical sensor displayed very high specificity for p-NP with no observed interference from some other possible interfering substances such as 2, 4-di-NP, ortho-NP, and meta-NP. The developed strategy was useful for sensitive detection of p-NP quantity in canals/rivers and ground H2O samples with good recoveries.

Supramolecular Atropine Potentiometric Sensor

A supramolecular atropine sensor was developed, using cucurbit[6]uril as the recognition element. The solid-contact electrode is based on a polymeric membrane incorporating cucurbit[6]uril (CB[6]) as an ionophore, 2-nitrophenyl octyl ether as a solvent mediator, and potassium tetrakis (4-chlorophenyl) borate as an additive. In a MES-NaOH buffer at pH 6, the performance of the atropine sensor is characterized by a slope of (58.7 ± 0.6) mV/dec with a practical detection limit of (6.30 ± 1.62) × 10⁻⁷ mol/L and a lower limit of the linear range of (1.52 ± 0.64) × 10⁻⁶ mol/L. Selectivity coefficients were determined for different ions and excipients. The obtained results were bolstered by the docking and spectroscopic studies which demonstrated the interaction between atropine and CB[6]. The accuracy of the potentiometric analysis of atropine content in certified reference material was evaluated by the t-Student test. The herein proposed sensor answers the need for reliable methods providing better management of this hospital drug shelf-life while reducing its flush and remediation costs.

Voltammetric Pathways for the Analysis of Ophthalmic Drugs

Background:

This review investigates the ophthalmic drugs that have been studied with voltammetry in the web of science database in the last 10 years.

Introduction:

Ophthalmic drugs are used in the diagnosis, evaluation and treatment of various ophthalmological diseases and conditions. A significant literature has emerged in recent years that investigates determination of these active compounds via electroanalytical methods, particularly voltammetry. Low cost, rapid determination, high availability, efficient sensitivity and simple application make voltammetry one of the most used methods for determining various kinds of drugs including ophthalmic ones.

Methods:

In this particular review, we searched the literature via the web of science database for ophthalmic drugs which are investigated with voltammetric techniques using the keywords of voltammetry, electrochemistry, determination and electroanalytical methods.

Results:

We found 33 types of pharmaceuticals in nearly 140 articles. We grouped them clinically into seven major groups as antibiotics, antivirals, non-steroidal anti-inflammatory drugs, anti-glaucomatous drugs, steroidal drugs, local anesthetics and miscellaneous. Voltammetric techniques, electrodes, optimum pHs, peak potentials, limit of detection values, limit of quantification values, linearity ranges, sample type and interference effects were compared.

Conclusion:

Ophthalmic drugs are widely used in the clinic and it is important to determine trace amounts of these species analytically. Voltammetry is a preferred method for its ease of use, high sensitivity, low cost, and high availability for the determination of ophthalmic drugs as well as many other medical drugs. The low limits of detection values indicate that voltammetry is quite sufficient for determining ophthalmic drugs in many media such as human serum, urine and ophthalmic eye drops.

Specific quantification of atropine using molecularly imprinted polymer on graphene quantum dots

Herein, development of a reliable and specific fluorometric assay was disclosed for the sensitive detection of atropine. The method was designed using the surface molecularly imprinted polymer on high fluorescent graphene quantum dots (GQDs). Molecularly imprinted polymer capped GQDs (MIP-GQDs) were prepared through the common co-polymerization reaction of 3-(3-aminopropyl) triethoxysilane (APTES) and tetraethyl orthosilicate (TEOS), act as the main functional and cross-linking monomers, respectively. The used template for this reaction was atropine. The created blue luminescent MIP-GQDs composite, which had a great affinity to adsorb atropine from the sample solution, could lead to a notable fluorescence quenching. In fact, GQDs act as the recognizing antenna for adsorbed atropine into the specific MIP sites. The linear association between the observed quenching effect and atropine concentration was exploited to design a selective assay to the detection of atropine. After optimization process, a linear calibration graph was achieved in the atropine concentration range of 0.5-300 ng mL^-1 with a detection limit of 0.22 ng mL^-1. Exploitation of high specific MIP technique along with high fluorescent GQDs provided a highly selective and sensitive assay for atropine as a model analyte. It was adequately utilized for the analysis of atropine in biological samples.

Recent progress in nanomaterial-based assay for the detection of phytotoxins in foods

Phytotoxins refers to toxic chemicals derived from plants. They include both secondary metabolites that are dose-dependently toxic and allergens that can cause anaphylactic shock in sensitive individuals. Detecting phytotoxins in foods is increasingly important. Conventional methods for detecting phytotoxins lack sufficient sensitivity and operational convenience. Nanomaterial-based determination assays show great competence in fast and accurate sensing of trace substances. In the present review, representative phytotoxin categories of alkaloids, cyanides, and proteins are discussed. Application of notable nanomaterials, e.g. carbon nanotubes, graphene oxide, magnetic nanoparticles, metal-based nanotools, and quantum dots, in specific sensing strategies to fit the physiochemical properties of the target toxins are summarized. Nanomaterials mainly play four roles in phytotoxin detection: 1) analyte enricher; 2) sensor structure mediator; 3) target recognizer or reactant; 4) signaling agent. Great achievements have been made in the detection of trace plant-derived toxins in food matrices, yet there are still challenges awaiting further investigation.

Selective recognition of atropine in biological fluids and leaves of Datura stramonium employing a carbon nanotube–chitosan film based biosensor

This paper demonstrates a selective, expeditious and facile electrochemical approach for the ultrasensitive detection of atropine in complex matrices.

A novel sensor for sensitive determination of atropine based on a Co3O4-reduced graphene oxide modified carbon paste electrode

Co₃O₄-reduced graphene oxide acted as a selective and sensitive modifier in a sensing layer for electrochemical determination of atropine.

New voltammetric strategy for simultaneous determination of N-acetylcysteine and folic acid using a carbon nanotube modified glassy carbon electrode

A novel 1-benzyl-4-ferrocenyl-1H-[1,2,3]-triazole (BFT)/carbon nanotube modified glassy carbon electrode (BFT-CNT-GCE) was prepared for the simultaneous determination of N-acetylcysteine (NAC) and folic acid (FA). Cyclic voltammetry (CV), chronoamperometry (CHA), and square wave voltammetry (SWV) methods were used to investigate the modified electrode for the electrocatalytic oxidation of NAC and FA in aqueous solutions. The separation of the oxidation peak potentials for NAC-FA was about 280 mV. The calibration curve obtained for NAC was in the range of 0.1-600.0 μM. The detection limit (S/N=3) was 62.0±2.0 nM for NAC. The diffusion coefficient and the catalytic rate constant for the oxidation of NAC at the modified electrode were calculated as (3.5±0.2)×10(-5) cm(2) s(-1) and (9.85±0.4)×10(-4) M(-1) s(-1), respectively. The method was employed for the determination of NAC and FA in some real samples.