One step green synthesis of silver nano/microparticles using extracts of Trachyspermum ammi and Papaver somniferum

Synthesis of metallic nanoparticles using biometabolites: mechanisms and applications

Bio-metabolites have played a crucial role in the recent green synthesis of nanoparticles, resulting in more versatile, safer, and effective nanoparticles. Various primary and secondary metabolites, such as proteins, carbohydrates, lipids, nucleic acids, enzymes, vitamins, organic acids, alkaloids, flavonoids, and terpenes, have demonstrated strong metal reduction and stabilization properties that can be utilized to synthesize nanomaterials and influence their characters. While physical and chemical methods were previously used to synthesize these nanomaterials, their drawbacks, including high energy consumption, elevated cost, lower yield, and the use of toxic chemicals, have led to a shift towards eco-friendly, rapid, and efficient alternatives. Biomolecules act as reducing agents through deprotonation, nucleophilic reactions, transesterification reactions, ligand binding, and chelation mechanisms, which help sequester metal ions into stable metal nanoparticles (NPs). Engineered NPs have potential applications in various fields due to their optical, electronic, and magnetic properties, offering improved performance compared to bulkier counterparts. NPs can be used in medicine, food and agriculture, chemical catalysts, energy harvesting, electronics, etc. This review provides an overview of the role of primary and secondary metabolites in creating effective nanostructures and their potential applications.

Green Synthesis of Novel Silver Nanoparticles Using Salvia blepharophylla and Salvia greggii: Antioxidant and Antidiabetic Potential and Effect on Foodborne Bacterial Pathogens

In the face of evolving healthcare challenges, the utilization of silver nanoparticles (AgNPs) has emerged as a compelling solution due to their unique properties and versatile applications. The aim of this study was the synthesis and characterization of novel AgNPs (SB-AgNPs and SG-AgNPs, respectively) using Salvia blepharophylla and Salvia greggii leaf extracts and the evaluation of their antimicrobial, antioxidant, and antidiabetic activities. Several analytical instrumental techniques were utilized for the characterization of SB-AgNPs and SG-AgNPs, including UV-visible (UV-Vis) spectroscopy, transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transmission infrared (FT-IR) spectroscopy, energy-dispersive X-ray analysis (EDX), and X-ray diffraction (XRD). FTIR analysis identified various functional groups in the leaf extracts and nanoparticles, suggesting the involvement of phytochemicals as reducing and stabilizing agents. High-resolution TEM images displayed predominantly spherical nanoparticles with average sizes of 52.4 nm for SB-AgNPs and 62.5 nm for SG-AgNPs. Both SB-AgNPs and SG-AgNPs demonstrated remarkable antimicrobial activity against Gram-positive bacteria Staphylococcus aureus and Listeria monocytogenes and Gram-negative bacteria Salmonella typhimurium and Escherichia coli. SB-AgNPs and SG-AgNPs also exhibited 90.2 ± 1.34% and 89.5 ± 1.5% DPPH scavenging and 86.5 ± 1.7% and 80.5 ± 1.2% α-amylase inhibition, respectively, at a concentration of 100 μg mL-1. Overall, AgNPs synthesized using S. blepharophylla and Salvia greggii leaf extracts may serve as potential candidates for antibacterial, antioxidant, and antidiabetic agents. Consequently, this study provides viable solutions to mitigate the current crisis of antibiotic resistance and to efficiently combat antimicrobial infections and Type 2 diabetes.

Promising applications of phyto-fabricated silver nanoparticles: Recent trends in biomedicine

The prospective contribution of phyto-nanotechnology to the synthesis of silver nanomaterials for biomedical purposes is attracting increasing interest across the world. Green synthesis of silver nanoparticles (Ag-NPs) through plants has been extensively examined recently, and it is now seen to be a green and efficient path for future exploitation and development of practical nano-factories. Fabrication of Ag-NPs is the process involves use of plant extracts/phyto-compounds (e.g.alkaloids, terpenoids, flavonoids, and phenolic compounds) to synthesise nanoparticles in more economical and feasible. Several findings concluded that in the field of medicine, Ag-NPs play a major role in pharmacotherapy (infection and cancer). Indeed, they exhibits novel properties but the reason is unclear (except some theoretical interpretation e.g. size, shape and morphology). But recent technological advancements help to address these questions by predicting the unique properties (composition and origin) by characterizing physical, chemical and biological properties. Due to increased list of publications and their application in the field of agriculture, industries and pharmaceuticals, issues relating to toxicity are unavoidable and question of debate. The present reviews aim to find out the role of plant extracts to synthesise Ag-NPs. It provides an overview of various phytocompounds and their role in the field of biomedicine (antibacterial, antioxidant, anticancer, anti-inflammatory etc.). In addition, this review also especially focused on various applications such as role in infection, oxidative stress, application in medical engineering, diagnosis and therapy, medical devices, orthopedics, wound healing and dressings. Additionally, the toxic effects of Ag-NPs in cell culture, tissue of different model organism, type of toxic reactions and regulation implemented to reduce associated risk are discussed critically. Addressing all above explanations, this review focus on the detailed properties of plant mediated Ag-NPs, its impact on biology, medicine and their commercial properties as well as toxicity.

Metallic Nanoparticles: A Promising Arsenal against Antimicrobial Resistance-Unraveling Mechanisms and Enhancing Medication Efficacy

The misuse of antibiotics and antimycotics accelerates the emergence of antimicrobial resistance, prompting the need for novel strategies to combat this global issue. Metallic nanoparticles have emerged as effective tools for combating various resistant microbes. Numerous studies have highlighted their potential in addressing antibiotic-resistant fungi and bacterial strains. Understanding the mechanisms of action of these nanoparticles, including iron-oxide, gold, zinc oxide, and silver is a central focus of research within the life science community. Various hypotheses have been proposed regarding how nanoparticles exert their effects. Some suggest direct targeting of microbial cell membranes, while others emphasize the release of ions from nanoparticles. The most compelling proposed antimicrobial mechanism of nanoparticles involves oxidative damage caused by nanoparticles-generated reactive oxygen species. This review aims to consolidate knowledge, discuss the properties and mechanisms of action of metallic nanoparticles, and underscore their potential as alternatives to enhance the efficacy of existing medications against infections caused by antimicrobial-resistant pathogens.

Nanobiotechnological approaches in anticoagulant therapy: The role of bioengineered silver and gold nanomaterials

Nanotechnology is a novel area that has exhibited various remarkable applications, mostly in medicine and industry, due to the unique properties coming with the nanoscale size. One of the notable medical uses of nanomaterials (NMs) that attracted enormous attention recently is their significant anticoagulant activity, preventing or reducing coagulation of blood, decreasing the risk of strokes, heart attacks, and other serious conditions. Despite successful in vitro experiments, in vivo analyses are yet to be confirmed and further research is required to fully prove the safety and efficacy of nanoparticles (NPs) and to introduce them as valid alternatives to conventional ineffective anticoagulants with various shortcomings and side-effects. NMs can be synthesized through two main routes, i.e., the bottom-up route as a more preferable method, and the top-down route. In numerous studies, biological fabrication of NPs, especially metal NPs, is highly suggested given its eco-friendly approach, in which different resources can be employed such as plants, fungi, bacteria, and algae. This review discusses the green synthesis and characterization of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) as two of the most useful metal NPs, and also their alloys in different studies focussing on their anticoagulant potential. Challenges and alternative approaches to the use of these NPs as anticoagulants have also been highlighted.

One-Step Phytofabrication Method of Silver and Gold Nanoparticles Using Haloxylon salicornicum for Anticancer, Antimicrobial, and Antioxidant Activities

Among various routes of metallic nanoparticle (NPs) fabrication, phytosynthesis has significant advantages over other conventional approaches. Plant-mediated synthesis of NPs is a fast, one-step, ecobenign, and inexpensive method with high scalability. Herein, silver (Ag) and gold (Au)-NPs were extracellularly synthesized using aqueous Haloxylon salicornicum (H@Ag-, H@Au-NPs) leaf extracts. GC-MS was performed to analyze the chemical compositions of H. salicornicum extract. H@Ag- and H@Au-NPs were characterized via UV-Vis spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission and scanning electron microscopy, and Zetasizer. H@Ag- and H@Au-NPs have surface plasmon resonance at 435.5 and 530.3 nm, respectively. FTIR and GC-MS data suggest that secondary plant metabolites and hydrocarbons might be responsible for the reduction and stabilization of NPs. XRD demonstrated that both NPs have a crystalline nature. H@Ag-NPs have a uniform spherical shape, whereas H@Au-NPs are spherical with few oval and triangular shapes, and their average nanosizes were 19.1 ± 0.8 and 8.1 ± 0.3 nm, respectively. Hydrodynamic diameters of H@Ag-NPs and H@Au-NPs were 184.7 nm, 56.4, and 295.4 nm, and their potential charges were -24.0 and -24.4 mV, respectively. The inhibitory activity of 500 µg/mL H@Ag- and H@Au-NPs was tested against Sw480, Sw620, HCT-116, and Caco-2 colon cancer cell lines and two normal cell lines, including HFs and Vero. H@Ag-NPs revealed potent anticancer activity against all cancer cells at low concentrations. Sw480 was the most sensitive cell to H@Ag-NPs, whereas Sw620 was the least permeable one. These findings suggested that the antiproliferative activity of H@Ag-NPs is cell-response-dependent and may be influenced by a variety of factors, including the cellular metabolic state, which influences cellular charge and interactions with charged NPs. Although H@Au-NPs were smaller, their reactivity against cancer cells was weak, suggesting that the chemical properties, metal structure, quantity and chemistry of the functional groups on the NP surface may influence their reactivity. The biocidal activity of 1 mg/mL H@Ag- and H@Au-NPs against Staphylococcus aureus, Bacillus cereus, Escherichia coli and Klebsiella pneumoniae was assessed. H@Ag-NPs showed biocidal activity against Gram-positive bacteria compared to Gram-negative bacteria, whereas H@Au-NPs showed no inhibitory activity. FRAP and DPPH assays were used to determine the scavenging activity of the plant extracts and both NPs. H@Ag-NPs (1 mg/mL) had the greatest scavenging activity compared to tested drugs. These findings suggest that H@Ag-NPs are potent anticancer, antibacterial, and antioxidant agents, while H@Au-NPs may be used as a drug vehicle for pharmaceutical applications.

Synthesis of Silver Nanowires Using a Polyvinylpyrrolidone-Free Method with an Alpinia zerumbet Leaf Based on the Oriented Attachment Mechanism

In this study, silver nanowires (AgNWs) were successfully synthesized by using a polyvinylpyrrolidone (PVP)-free hydrothermal method with an Alpinia zerumbet leaf chunk as a reducing agent and template. Meanwhile, the mechanism of biomass synthesis of AgNWs is also explored. The AgNWs have a diameter of ∼77 nm and a length of ∼10 μm. During the hydrothermal process, the biomass initially serves as a reducing agent to reduce silver ions. As the reaction proceeds, the biomass will form a pipe-shaped soft template by hydrothermal carbonization. Silver ions are adsorbed and reduced along the pipe-shaped soft templates to form silver nanorods, and adjacent nanorods are merged to AgNWs. Thus, AgNWs are grown along the pipeline soft template based on the oriented attachment mechanism. Inspired by this, the mechanism of the polyol method was further investigated. In the initial growth stage, AgNWs synthesized by the polyol method have a V-shaped notch. Therefore, AgNWs synthesized by the polyol method may also grow on the basis of the oriented attachment mechanism with PVP as a template.

A review on synthesis methods and recent applications of nanomaterial in wastewater treatment: Challenges and future perspectives

Freshwater has been incessantly polluted by various activities such as rapid industrialization, fast growth of population and agricultural activities. Water pollution is considered as one the major threatens to human health and aquatic bodies which causes various severe harmful diseases including gastrointestinal disorders, asthma, cancer, etc. The polluted wastewater could be treated by different conventional and advanced methodologies. Amongst them, adsorption is the most utilized low cost, efficient technique to treat and remove the harmful pollutants from the wastewater. The efficiency of adsorption mainly depends on the surface properties such as functional group availability and surface area of the adsorbents used. Since various waste-based carbon derivatives are utilized as adsorbents for harmful pollutants removal; nanomaterials are employed as effective adsorbents in recent times due to its excellent surface properties. This review presents an overview of the different types of nanomaterials such as nano-particles, nanotubes, nano-sheets, nano-rods, nano-spheres, quantum dots, etc. which have been synthesized by different chemical and green synthesis methodologies using plants, microorganisms, biomolecules and carbon derivatives, metals and metal oxides and polymers. By concentrating on potential research difficulties, this study offers a new viewpoint on fundamental field of nanotechnology for wastewater treatment applications. This review paper critically reviewed the synthesis of nanomaterials more importantly green synthesis and their applications in wastewater treatment to remove the harmful pollutants such as heavy metals, dyes, pesticides, polycyclic aromatic hydrocarbons, etc.

Green Synthesis of Silver Nanoparticles for Preparation of Gelatin Films with Antimicrobial Activity

Silver nanoparticles were successfully synthesized using Thuja orientalis aqueous extract and AgNO3 as a precursor. UV-Vis showed a distinct absorption peak at 424 nm attributed to silver nanoparticles due to their surface plasmon resonance. Atomic absorption analysis reflected an increase in the concentration of nanoparticles in relation to the progress of the synthesis, obtaining a peak concentration value of 15.7 mg/L at 50 min. The FTIR spectra revealed the characteristic functional groups of phytomolecules involved in the silver-ion binding process, such as R-O-H (3335 cm-1) O=C-OH (2314 cm-1) and C-C=C (1450 cm-1). At 50 min, zeta potential showed the stability of the nanoparticles with the value of -21.73 mV. TEM micrographs revealed the formation of spherical nanoparticles with an average size of about 85.77 nm. Furthermore, films incorporated with nanoparticles exhibited a Tg from 66.42 °C to 73.71 °C and Tm at 103.31 °C. Films from the G22 formulation presented excellent antibacterial properties inhibiting the growth of Staphylococcus aureus. Thuja orientalis aqueous extract could be a low-cost, eco-friendly, and efficient reducing and capping agent for the synthesis of nanometric-sized Ag particles. Gelatin films with nanoparticles are expected to have high potential as an active food packaging system.

Multifarious global flora fabricated phytosynthesis of silver nanoparticles: a green nanoweapon for antiviral approach including SARS-CoV-2

The progressive research into the nanoscale level upgrades the higher end modernized evolution with every field of science, engineering, and technology. Silver nanoparticles and their broader range of application from nanoelectronics to nano-drug delivery systems drive the futuristic direction of nanoengineering and technology in contemporary days. In this review, the green synthesis of silver nanoparticles is the cornerstone of interest over physical and chemical methods owing to its remarkable biocompatibility and idiosyncratic property engineering. The abundant primary and secondary plant metabolites collectively as multifarious phytochemicals which are more peculiar in the composition from root hair to aerial apex through various interspecies and intraspecies, capable of reduction, and capping with the synthesis of silver nanoparticles. Furthermore, the process by which intracellular, extracellular biological macromolecules of the microbiota reduce with the synthesis of silver nanoparticles from the precursor molecule is also discussed. Viruses are one of the predominant infectious agents that gets faster resistance to the antiviral therapies of traditional generations of medicine. We discuss the various stages of virus targeting of cells and viral target through drugs. Antiviral potential of silver nanoparticles against different classes and families of the past and their considerable candidate for up-to-the-minute need of complete addressing of the fulminant and opportunistic global pandemic of this millennium SARS-CoV2, illustrated through recent silver-based formulations under development and approval for countering the pandemic situation.

Graphical abstract

Papaver Plants: Current Insights on Phytochemical and Nutritional Composition Along with Biotechnological Applications

The genus Papaver is highly esteemed in the pharmacy industry, in the culinary field, and as ornamental plants. These plants are also valued in traditional medicine. Among all Papaver species, Papaver somniferum L. (opium poppy) is the most important species in supplying phytochemicals for the formulation of drugs, mainly alkaloids like morphine, codeine, rhoeadine, thebaine, and papaverine. In addition, Papaver plants present other types of phytochemicals, which altogether are responsible for its biological activities. Therefore, this review covers the phytochemical composition of Papaver plants, including alkaloids, phenolic compounds, and essential oils. The traditional uses are reviewed along with their pharmacological activities. Moreover, safety aspects are reported to provide a deep overview of the pharmacology potential of this genus. An updated search was carried out in databases such as Google Scholar, ScienceDirect, and PubMed to retrieve the information. Overall, this genus is a rich source of alkaloids of different types and also contains interesting phenolic compounds, such as anthocyanins, flavonols, and the characteristic indole derivatives nudicaulins. Among other pharmacological properties, numerous preclinical studies have been published about the analgesic, anticancer, antimicrobial, antioxidant, and antidiabetic activities of Papaver plants. Although it highlights the significant impact of this genus for the treatment of a variety of diseases and conditions, as a future prospect, characterization works accompanying preclinical studies are required along with clinical and toxicology studies to establish a correlation between the scientific and traditional knowledge.

Monodispersed AgNPs Synthesized from the Nanofactories of Theobroma cacao (Cocoa) Leaves and Pod Husk and Their Antimicrobial Activity

Silver nanoparticles (AgNPs) have been synthesized from the more chemically rich and diverse cocoa pod; the synthesis of silver nanoparticles from cocoa leaves, which are less rich and have low diversity in bioactive molecules, is yet to be achieved. In this work, AgNPs produced using the extracts of the cocoa leaf (CL) and cocoa pods (CP) have been investigated and their antimicrobial activity against E. coli was evaluated. UV-visible absorption spectroscopy was used to examine the reduction of silver ions in solution and the surface plasmon resonance of AgNPs. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) were used to further characterize the nanoparticles. The crystalline nature of AgNPs was confirmed by XRD, and the purity and presence of elemental silver were determined by EDX. CL-AgNPs were observed to have a surface plasmon resonance of 425 nm, while CP-AgNPs had a surface plasmon resonance of 440 nm. CL-AgNPs had a significantly higher purity than CP-AgNPs. With a shorter nucleation time, the intensity of the UV-Vis spectrum was always higher in the case of CL-AgNPs, indicating a larger population of bioactive molecules available for CL-AgNPs synthesis. FTIR confirmed the presence of phenolic compounds in the leaf and pod extract, implying that water-soluble polyphenolic and flavonoid chemicals are responsible for nanoparticle reduction, capping, and stability. AgNPs generated from CL and CP extracts are polydispersed, with particle sizes of 10–110 nm and 20–680 nm, respectively, according to DLS. The corresponding zeta potentials measured are −2.7 mV for CL-AgNPs and −0.93 mV for CP-AgNPs. The zeta potential values suggest that the particles have long-term stability. Furthermore, CL-AgNPs outperformed CP-AgNPs in terms of antibacterial activity against Escherichia coli. CL-AgNPs were found to have a maximal inhibitory zone of 21 mm.

Bionanofactories for Green Synthesis of Silver Nanoparticles: Toward Antimicrobial Applications

Among the various types of nanoparticles and their strategy for synthesis, the green synthesis of silver nanoparticles has gained much attention in the biomedical, cellular imaging, cosmetics, drug delivery, food, and agrochemical industries due to their unique physicochemical and biological properties. The green synthesis strategies incorporate the use of plant extracts, living organisms, or biomolecules as bioreducing and biocapping agents, also known as bionanofactories for the synthesis of nanoparticles. The use of green chemistry is ecofriendly, biocompatible, nontoxic, and cost-effective. We shed light on the recent advances in green synthesis and physicochemical properties of green silver nanoparticles by considering the outcomes from recent studies applying SEM, TEM, AFM, UV/Vis spectrophotometry, FTIR, and XRD techniques. Furthermore, we cover the antibacterial, antifungal, and antiparasitic activities of silver nanoparticles.

Colloidal and vesicular delivery system for herbal bioactive constituents

OBJECTIVES

The main objective of the present review is to explore and examine the effectiveness of currently developed novel techniques to resolve the issues which are associated with the herbal constituents/extract.

METHODS

A systematic thorough search and collection of reviewed information from Science direct, PubMed and Google Scholar databases based on various sets of key phrases have been performed. All the findings from these data have been studied and briefed based on their relevant and irrelevant information.

RESULT

Herbal drugs are gaining more popularity in the modern world due to their applications in curing various ailments with minimum toxic effects, side effect or adverse effect. However, various challenges exist with herbal extracts/plant actives such as poor solubility (water/lipid), poor permeation, lack of targeting specificity, instability in highly acidic pH, and liver metabolism, etc. Nowadays with the expansion in the technology, novel drug delivery system provides avenues and newer opportunity towards the delivery of herbal drugs with improved physical chemical properties, pharmacokinetic and pharmacodynamic. Developing nano-strategies like Polymeric nanoparticles, Liposomes, Niosomes, Microspheres, Phytosomes, Nanoemulsion and Self Nano Emulsifying Drug Delivery System, etc. imparts benefits for delivery of phyto formulation and herbal bioactives. Nano formulation of phytoconstituents/ herbal extract could lead to enhancement of aqueous solubility, dissolution, bioavailability, stability, reduce toxicity, permeation, sustained delivery, protection from enzymatic degradation, etc. CONCLUSION: Based on the above findings, the conclusion can be drawn that the nano sized novel drug delivery systems of herbal and herbal bioactives have a potential future for upgrading the pharmacological action and defeating or overcoming the issues related with these constituents. The aims of the present review was to summarize and critically analyze the recent development of nano sized strategies for promising phytochemicals delivery systems along with their therapeutic applications supported by experimental evidence and discussing the opportunities for further aspects.

Myco-nanotechnological approach to synthesize silver oxide nanocuboids using endophytic fungus isolated from Citrus pseudolimon plant

The current study reports the isolation of Colletotrichum plurivorum, an endophytic fungus from a Citrus pseudolimon plant and its utilization in the green synthesis of silver oxide nanocuboids (Ag₂O NCs) at room temperature. The synthesized nanocrystals were thoroughly characterized by UV-vis, FTIR spectroscopy, field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), X-ray diffraction (XRD) analyses. Electron microscopic images confirmed the formation of cuboid shaped particles having size 200-250 nm in length and 80-150 nm in width, whereas, XRD and selected area electron diffraction (SAED) pattern confirms the formation of cubic Ag₂O nanocrystals. Then these Ag₂O NCs are applied in antibacterial activities against a pathogenic gram-negative bacteria Escherichia coli and gram-positive bacteria Bacillus subtilis and found very good activities against them. Currently these types of nanocuboids have drawn great interest in the field of catalysis, photocatalysis to biomedical applications.

Microwave Mediated Fast Synthesis of Silver Nanoparticles and Investigation of Their Antibacterial Activities for Gram-Positive and Gram-Negative Microorganisms

Herein, a simple one-step microwave irradiation technique has been used to synthesize the silver nanoparticles using silver nitrate (AgNO3) solution and cetyltrimethyl ammonium bromide (CTAB) as a stabilizing agent. The crystals of as-prepared nanoparticles were studied using X-ray diffraction (XRD) and a selected area electron diffraction (SAED) pattern, confirming the single-phase face-centered cubic structure. The optical property measured using UV-Vis spectroscopy shows an absorption maximum at 420 nm, which also confirms the formation of silver nanoparticles. Transmission electron microscopy (TEM) analysis revealed that the silver nanoparticles have a spherical shape with an average diameter of ~6 nm. The antibacterial properties of silver nanoparticles were investigated using both Gram-positive and Gram-negative microorganisms, such as Staphylococcus aureus, Pseudomonas aeruginosa, andEscherichia coli. Klebsiella pneumoniae, and Candida albicans. Results showed a highest zone of inhibition of about 35 mm against P. aeruginosa as compared with E. coli (21 mm), S. aureus (30 mm), K. pneumonia (28 mm), and C. albicans (29 mm). These studies suggested that silver nanoparticles prepared by this fast and effective method might be developed as antibacterial agents against an extensive range of microorganisms to control and stop the spreading and persistence of bacterial infections.

Plant celluloses, hemicelluloses, lignins, and volatile oils for the synthesis of nanoparticles and nanostructured materials

A huge variety of plants are harvested worldwide and their different constituents can be converted into a broad range of bionanomaterials. In parallel, much research effort in materials science and engineering is focused on the formation of nanoparticles and nanostructured materials originating from agricultural residues. Cellulose (40-50%), hemicellulose (20-40%), and lignin (20-30%) represent major plant ingredients and many techniques have been described that separate the main plant components for the synthesis of nanocelluloses, nano-hemicelluloses, and nanolignins with divergent and controllable properties. The minor components, such as essential oils, could also be used to produce non-toxic metal and metal oxide nanoparticles with high bioavailability, biocompatibility, and/or bioactivity. This review describes the chemical structure, the physical and chemical properties of plant cell constituents, different techniques for the synthesis of nanocelluloses, nanohemicelluloses, and nanolignins from various lignocellulose sources and agricultural residues, and the extraction of volatile oils from plants as well as their use in metal and metal oxide nanoparticle production and emulsion preparation. Furthermore, details about the formation of activated carbon nanomaterials by thermal treatment of lignocellulose materials, a few examples of mineral extraction from agriculture waste for nanoparticle fabrication, and the emerging applications of plant-based nanomaterials in different fields, such as biotechnology and medicine, environment protection, environmental remediation, or energy production and storage, are also included. This review also briefly discusses the recent developments and challenges of obtaining nanomaterials from plant residues, and the issues surrounding toxicity and regulation.

Synthesis, optimization and characterization of silver nanoparticles using the catkin extract of Piper longum for bactericidal effect against food-borne pathogens via conventional and mathematical approaches

Inspired with an increasing environmental awareness, we performed an eco-friendly amenable process for the synthesis of silver nanoparticles (AgNPs) using the catkins of Piper longum as an alternative approach with the existing methods of using plant extracts. The fabrication of nanoparticles occurred within 10 min. This was initially observed by colour change of the solution. UV-visible spectroscopic studies (UV-Vis) were performed for further confirmation. The analysis elucidated that the surface plasmon resonance (SPR) was specifically corresponding to AgNPs. Fourier transform infrared spectrophotometry (FTIR) studies indicated that polyphenols could possibly be the encapsulating agents. The size and shape of the nanoparticles was analysed using Transmission electron microscopy (TEM). The nanoparticles were predominant spheres ranging between 10 and 42 nm at two different scales. The formation of elemental silver was confirmed further by X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction (XRD). GC-MS analysis was used to identify the possible encapsulates on the nanoparticles. The antibacterial effect of the biosynthesized AgNPs was tested against two gram-positive (Bacillus cereus and Staphylococcus aureus), and five gram-negative (Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae, Pseudomonas aeruginosa and Salmonella typhi) bacteria. Outcomes of the study suggest that these pathogens were susceptible to the AgNPs. This is the first ever international report on correlating the antibacterial effect of silver nanoparticles using mathematical modelling with a conventional antimicrobial assay. The results indicate that nanoparticles of silver synthesized using catkin extract of P. longum can be exploited towards the development of potential antibacterial agents.

Proficient dye removal from water using biogenic silver nanoparticles prepared through solid-state synthetic route

An environmentally benign, one-pot and highly scalable method was presented to produce biogenic silver nanoparticles (Ag NPs) using the solid-state synthetic route. Four plant-derived candidate bio-reductants (i.e., Datura stramonium, Papaver orientale, Mentha piperita, and Cannabis sativa) were investigated to compare the efficiency of solid-state route and typical solution method. M. piperita was selected as the best plant resource to produce totally pure and uniform Ag NPs (average diameter of 15 nm) without any aggregation. The purity and size of biogenic Ag NPs, were tailored by adjusting the M. piperita leaf powder/silver nitrate weight ratio and temperature. The as-synthesized Ag NPs were effectively utilized as an eco-friendly nanoadsorbent in water remediation to remove a model dye (i.e., crystal violet). The key factors affecting on the sorption process (i.e., nanoadsorbent dosage, temperature, pH, dye initial concentration, and shaking time) were investigated. The pseudo-second-order kinetic model was well fitted to the sorption process and at the optimum sorption conditions, based on the Langmuir model, the adsorption capacity was found to be 704.7 mg/g. The current, cost effective and feasible method could be considered as an applicable strategy to produce green, reusable and proficient Ag NPs as nanoadsorbents for removal of dyes from contaminated water.

Phyto-inspired and scalable approach for the synthesis of PdO-2Mn2O3: a nano-material for application in water splitting electro-catalysis

A modified co-precipitation method has been used for the synthesis of a PdO-2Mn₂O₃ nanocomposite as an efficient electrode material for the electro-catalytic oxygen evolution (OER) and hydrogen evolution reaction (HER). Palladium acetate and manganese acetate in molar ratio 1 : 4 were dissolved in water, and 10 ml of an aqueous solution of phyto-compounds was slowly added until completion of precipitation. The filtered and dried precipitates were then calcined at 450 °C to obtain a blackish brown colored mixture of PdO-2Mn₂O₃ nanocomposite. These particles were analyzed by ultra violet visible spectrophotometry (UV-vis), infrared spectroscopy (FTIR), powder X-ray diffractometry (XRD), scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) for crystallinity, optical properties, and compositional and morphological makeup. Using Tauc's plot, the direct band gap (3.18 eV) was calculated from the absorption spectra. The average crystallite sizes, as calculated from the XRD, were found to be 15 and 14.55 nm for PdO and Mn₂O₃, respectively. A slurry of the phyto-fabricated PdO-2Mn₂O₃ powder was deposited on Ni-foam and tested for electro-catalytic water splitting studies in 1 M KOH solution. The electrode showed excellent OER and HER performance with low over-potential (0.35 V and 121 mV) and Tafel slopes of 115 mV dec^-1 and 219 mV dec^-1, respectively. The outcomes obtained from this study provide a direction for the fabrication of a cost-effective mixed metal oxide based electro-catalyst via an environmentally benign synthesis approach for the generation of clean energy.

Biocontrol of mosquito vectors through herbal-derived silver nanoparticles: prospects and challenges

Mosquitoes spread several life-threatening diseases such as malaria, filaria, dengue, Japanese encephalitis, West Nile fever, chikungunya, and yellow fever and are associated with millions of deaths every year across the world. However, insecticides of synthetic origin are conventionally used for controlling various vector-borne diseases but they have various associated drawbacks like impact on non-targeted species, negative effects on the environment, and development of resistance in vector species by alteration of the target site. Plant extracts, phytochemicals, and their nanoformulations can serve as ovipositional attractants, insect growth regulators, larvicides, and repellents with least effects on the environment. Such plant-derived products exhibit broad-spectrum resistance against various mosquito species and are relatively cheaper, environmentally safer, biodegradable, easily accessible, and are non-toxic to non-targeted organisms. Therefore, in this review article, the current knowledge of phytochemical sources exhibiting larvicidal activity and their variations in response to solvents used for their extraction is underlined. Also, different methods such as physical, chemical, and biological for silver nanoparticle (AgNPs) synthesis, their mechanism of synthesis using plant extract, their potent larvicidal activity, and the possible mechanism by which these particles kill mosquito larvae are discussed. In addition, constraints related to commercialization of nanoherbal products at government and academic or research level and barriers from laboratory experiments to field trial have also been discussed. This comprehensive information can be gainfully employed for the development of herbal larvicidal formulations and nanopesticides against insecticide-resistant vector species in the near future. Graphical abstract.

Green Chemistry Synthesis of Silver Nanoparticles and Their Potential Anticancer Effects

Nanobiotechnology has grown rapidly and become an integral part of modern disease diagnosis and treatment. Biosynthesized silver nanoparticles (AgNPs) are a class of eco-friendly, cost-effective and biocompatible agents that have attracted attention for their possible biomedical and bioengineering applications. Like many other inorganic and organic nanoparticles, such as AuNPs, iron oxide and quantum dots, AgNPs have also been widely studied as components of advanced anticancer agents in order to better manage cancer in the clinic. AgNPs are typically produced by the action of reducing reagents on silver ions. In addition to numerous laboratory-based methods for reduction of silver ions, living organisms and natural products can be effective and superior source for synthesis of AgNPs precursors. Currently, plants, bacteria and fungi can afford biogenic AgNPs precursors with diverse geometries and surface properties. In this review, we summarized the recent progress and achievements in biogenic AgNPs synthesis and their potential uses as anticancer agents.

Organic template-based ZnO embedded Mn3O4 nanoparticles: synthesis and evaluation of their electrochemical properties towards clean energy generation

To deal with fossil fuel depletion and the rise in global temperatures caused by fossil fuels, cheap and abundant materials are required, in order to fulfill energy demand by developing high-performance fuel cells and electrocatalysts. In this work, a natural organic agent has been used to synthesize nano-structured ZnO/Mn₃O₄ with high surface area and enhanced electrocatalytic performance. Upon pre-annealing treatment, mixed metal oxide precipitates are formed due to the complex formation between a metal oxide and organic extract. The thermally annealed mixed oxide ZnO/Mn₃O₄ was characterized by XRD diffractometer, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). Gas chromatography-mass spectrometry (GC-MS) identified methyldecylamine as a major stabilizing agent of the synthesized nanomaterial. Using a Tauc plot, the calculated band energy for the synthesized ZnO/Mn₃O₄ mixed metal oxide was 1.65 eV. Moreover, we have demonstrated the effects of incorporated organic compounds on the surface chemistry, morphology and electrochemical behavior of ZnO/Mn₃O₄. The phyto-functionalized ZnO/Mn₃O₄ was deposited on Ni-foam for electrocatalytic studies. The fabricated electrode revealed good performance with low over-potential and Tafel slope, suggesting it to be suitable as a potential catalyst for water splitting application, in particular for the oxygen evolution reaction (OER). The overall findings of the current study provide a cost-effective and efficient organic template for functionalization and sustainable fabrication of ZnO/Mn₃O₄ nanomaterial for application as an electrocatalyst.

To deal with fossil fuel depletion and the rise in global temperatures caused by fossil fuels, cheap and abundant materials are required, in order to fulfill energy demand by developing high-performance fuel cells and electrocatalysts.

Simultaneous green synthesis and in-situ impregnation of silver nanoparticles into organic nanofibers by Lythrum salicaria extract: Morphological, thermal, antimicrobial and release properties

This research has revealed the promising, green and one-pot approach for fabrication of antimicrobial nanohybrids based on organic nanofibers including cellulose (CNF), chitosan (CHNF), and lignocellulose (LCNF) nanofibers impregnated with silver nanoparticles (AgNPs). Lythrum salicaria extract was used as a reducing agent as well as a capping agent. Formation of the spherical AgNPs ranging between 45 and 65 nm was proved by UV-Vis spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Biomaterials supported AgNPs were characterized and compared for their morphological, thermal, release, and antimicrobial properties. The considerable influence of the phenolic compounds of L.salicaria extract on the synthesis and uniform distribution of AgNPs on nanofibers was confirmed by field emission electron microscopy (FE-SEM). Energy dispersive X-ray spectroscopy (EDX) and ICP-OES analysis of nanohybrids, reflected a high loading capacity for LCNF and also CHNF in contrast to CNF. The release of AgNPs from LCNF substrate was lower than other nanofibers but the order of antimicrobial activity of nanohybrids against E.coli and S.aureus was as this: CHNF ˃ LCNF ˃ CNF. Generally, this research suggested that the efficiency of CHNF and LCNF as immobilizing support of AgNPs is higher than CNF and L.salicaria extract was proposed as a high potential reducing and capping agent.

Removal of toxic contaminants from water by sustainable green synthesised non-toxic silver nanoparticles

The study describes the synthesis of silver nanoparticles using 21 different plant extracts having medicinal properties. Molecular ultraviolet-visible spectroscopy shows that the λ_max of nanoparticles synthesised by different plant extracts varied and ranged between 400 and 468 nm. The ultraviolet results revealed that although synthesis of nanoparticles occurred by all plant extracts successfully, their size varies, this was further confirmed by differential light scattering. The synthesised nanoparticles were investigated for their antimicrobial properties. The most promising silver nanoparticles Ocimum sanctum and Artemisia annua assisted were further characterised using transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). EDX data confirms that synthesised nanoparticles are highly pure. Further these two plant assisted nanoparticles were studied for chemocatalytic and adsorptive properties. The silver nanoparticles from Ocimum sanctum can catalyse the reduction of 4-nitrophenol (63%) within 20 min in the presence of NaBH₄, whereas Artemisia annua assisted silver nanoparticles did not show significant chemocatalytic activity. Both the promising nanoparticles can efficiently adsorb textile dyes from aqueous solutions. These synthesised nanoparticles were also exploited to remove microbial and other contaminants from Yamuna River water. The nanoparticles show excellent antimicrobial properties and can be reused repeatedly.

Antioxidant and antibacterial activity of silver nanoparticles synthesized by Cestrum nocturnum

Background

Silver nanoparticles are toxic to bacteria and have widespread application in different research areas.

Objective

The aim of this study was to synthesize silver nanoparticles using an aqueous leaf extract of Cestrum nocturnum and to test its antioxidant and antibacterial activities.

Materials and methods

The silver nanoparticles were synthesized by addition of 20 ml extract (8% w/v) with 180 ml silver nitrate solution (1 mM). The synthesis of silver nanoparticles was confirmed by UV–Vis spectrophotometer. The silver nanoparticles were characterized by X-ray diffractometer, Transmission Electron Microscope, Scanning Electron Microscope and Fourier Transform Infra-Red spectroscopy. The antioxidant property of silver nanoparticles was analyzed by the 2, 2-diphenyl-1-picrylhydrazyl, hydrogen peroxide, hydroxyl radical and superoxide radical scavenging methods. The bacteriostatic and bactericidal activity of silver nanoparticles against Escherichiacoli, Enterococcusfaecalis, and Salmonellatyphi was determined using bacterial growth inhibition method. The antibacterial sensitivity and Minimum Inhibitory Concentration (MIC) of silver nanoparticles was determined against the bacteria.

Results

The results confirmed that the silver nanoparticles synthesized by C.nocturnum extract were crystalline in nature, average particle size was 20 nm and were mostly spherical in shape. The antioxidant methods confirmed that the silver nanoparticles have more antioxidant activity as compared to vitamin C. The silver nanoparticles have strong antibacterial (maximum Vibrio cholerae and minimum E. faecalis) activity. The MIC value of silver nanoparticles was 16 μg/ml (Citrobacter), 4 μg/ml (E. faecalis), 16 μg/ml (S. typhi), 8 μg/ml (E. coli), 8 μg/ml (Proteusvulgaris), and 16 μg/ml (V. cholerae).

Conclusion

Green synthesized silver nanoparticles have strong antioxidant and antibacterial activity due to the presence of bioactive molecules on the surface of silver nanoparticles.

•

This study focuses on synthesis of silver nanoparticles from medicinal plant in nature.

•

The medicinal plant is rich in antioxidant property.

•

This study will help the researcher to uncover the antibacterial activity of silver nanoparticles.

Green synthesis of silver nanoparticles using Piper nigrum: tissue-specific bioaccumulation, histopathology, and oxidative stress responses in Indian major carp Labeo rohita

The aim of the present investigation is to assess the sublethal toxicity of biologically synthesized silver nanoparticles (Ag NPs) in Indian major carp Labeo rohita. Ag NPs used in the study were synthesized by using AgNO₃ with aqueous leaf extract of Piper nigrum. Median lethal concentration (LC₅₀) of synthesized Ag NPs was determined for 96 h (25 μg/L); 2.5 μg/L (1/10th LC₅₀) and 5 μg/L (1/5th LC₅₀) were taken as sublethal concentrations to evaluate the toxicity for 35 days. The results of the TEM, SEM, and EDX analyses revealed that Ag NPs were considerably accumulated in the gill, liver, and kidney of fish at both concentrations (2.5 and 5 μg/L). Consequently, the activity of the antioxidant enzymes, SOD and CAT, was significantly (P < 0.05) decreased in the gill, liver, and kidney when compared to the control group during the study period. However, lipid peroxidase (LPO) activity in the gill, liver, and kidney was significantly (P < 0.05) increased, and the result concluded a possible sign of free radical-induced oxidative stress in Ag NP-exposed fish than the sham-exposed individuals. The histopathological study also confirmed the alterations such as degeneration of lamella, lifting of lamellar epithelium, hepatic necrosis, pyknotic nuclei, increased intracellular space, and shrinkage of glomerulus elicited by Ag NPs in the gill, liver, and kidney of Labeo rohita with two different concentrations. The findings of the present study revealed that green synthesis of Ag NPs from Piper nigrum at sublethal concentrations leads to accumulation of Ag, oxidative stress, and histopathological alterations in the target organs of the fish, Labeo rohita.

Biomimetic production, characterisation, in vitro cytotoxic and anticancer assessment of aqueous extract‐mediated AgNPs of Teucrium stocksianum Boiss

Owing to the numerous biological applications, cost effectiveness and low cytotoxicity of the biomimetic nanoparticles (NPs), the authors optimised the production of silver NPs (AgNPs) using aqueous extract of Teucrium stocksianum Boiss. The NPs were characterised by ultraviolet‐visible (UV‐vis) spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM), dynamic light scattering (DLS) and Fourier transform‐infrared spectroscopy (FTIR). The UV‐vis spectroscopy revealed a surface plasmon resonance (410‐440 nm) at an incubation temperature of 90°C when 1 mM Ag nitrate combined to 5 mg/ml extract concentration in the ratio of 1:10. DLS results show an average zeta size of ∼44.61 nm and zeta potential of −15.3 mV. SEM and XRD confirmed the high crystallinity and cubical symmetry with an average size below 100 nm. FTIR measurement shows the presence of various functional groups, responsible for the capping and reduction of Ag metal. The 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide cell viability assay shows that AgNPs are less cytotoxic to J774 and L929 cells as compared with enhanced anticancer activity with low IC50 concentrations (68.24 µg/ml) against Michigan Cancer Foundation‐7 (MCF‐7) cells. The ethidium bromide/acridine orange assay shows that the AgNPs kill the cell by apoptosis. Overall, the results show that AgNPs possesses potent anticancer activities.

Update on Monoterpenes as Antimicrobial Agents: A Particular Focus on p-Cymene

p-Cymene [1-methyl-4-(1-methylethyl)-benzene] is a monoterpene found in over 100 plant species used for medicine and food purposes. It shows a range of biological activity including antioxidant, anti-inflammatory, antinociceptive, anxiolytic, anticancer and antimicrobial effects. This last property has been widely investigated due to the urgent need for new substances with antimicrobial properties, to be used to treat communicable diseases whose diffusion in developed countries has been facilitated by globalization and the evolution of antimicrobial resistance. This review summarizes available scientific data, as reported by the most recent studies describing the antimicrobial activity of p-cymene either alone, or as the main component of plant extracts, as well as addressing the mechanisms of action of cymenes as antimicrobial agents. While p-cymene is one of the major constituents of extracts and essential oils used in traditional medicines as antimicrobial agents, but considering the limited data on its in vivo efficacy and safety, further studies are required to reach a definitive recommendation on the use and beneficial effects of p-cymene in human healthcare and in biomedical applications as a promising candidate to functionalize biomaterials and nanomaterials.

Green methods for the synthesis of metal nanoparticles using biogenic reducing agents: a review

Metal nanoparticles are being extensively used in a variety of sectors, including drug delivery, cancer treatment, wastewater treatment, DNA analysis, antibacterial agents, biosensors and catalysts. Unlike chemically produced nanoparticles, biosynthesized metal nanoparticles based on green chemistry perspectives impose limited hazards to the environment and are relatively biocompatible. This review is therefore focused on green methods for nanoparticle synthesis by emphasizing on microbial synthesis using bacteria, fungi, algae, and yeasts, as well as phytosynthesis using plant extracts. Furthermore, a detailed description of bioreducing and capping/stabilizing agents involved in the biosynthesis mechanism using these green sources is presented.