Silver-doped calcium phosphate nanoparticles: Synthesis, characterization, and toxic effects toward mammalian and prokaryotic cells

Cell migration, DNA fragmentation and antibacterial properties of novel silver doped calcium polyphosphate nanoparticles

To combat infections, silver was used extensively in biomedical field but there was a need for a capping agent to eliminate its cytotoxic effects. In this study, polymeric calcium polyphosphate was doped by silver with three concentrations 1, 3 or 5 mol.% and were characterized by TEM, XRD, FTIR, TGA. Moreover, cytotoxicity, antibacterial, cell migration and DNA fragmentation assays were done to assure its safety. The results showed that the increase in silver percentage caused an increase in particle size. XRD showed the silver peaks, which indicated that it is present in its metallic form. The TGA showed that thermal stability was increased by increasing silver content. The antibacterial tests showed that the prepared nanoparticles have an antibacterial activity against tested pathogens. In addition, the cytotoxicity results showed that the samples exhibited non-cytotoxic behavior even with the highest doping concentration (5% Ag-CaPp). The cell migration assay showed that the increase in the silver concentration enhances cell migration up to 3% Ag-CaPp. The DNA fragmentation test revealed that all the prepared nanoparticles caused no fragmentation. From the results we can deduce that 3% Ag-CaPp was the optimum silver doped calcium polyphosphate concentration that could be used safely for medical applications.

Investigating the structure, solubility, and antibacterial properties of silver- and copper-doped hydroxyapatite

Hydroxyapatite (HA) powders were synthesized by the wet precipitation method in which two experimental compositions were synthesized (10 mol% Ag-HA and Cu-HA) where the CaNO₃ content was partially substituted with AgNO₃ and Cu(NO₃ )₂ . X-ray diffraction (XRD) was employed to characterize changes to the HA structure as the dopants (Cu²⁺ , Ag⁺ ) were incorporated into the materials structure. Energy-dispersive X-ray spectroscopy (EDS) determined confirmed the compositions and found that the Ca/P ratio was 1.63 for the control (HA) while Ag-HA and Cu-HA exhibited (X + Ca)/P ratios of 1.79 and 1.65, respectively. Antibacterial efficacies were evaluated against E. coli and S. aureus, as a function of surface area and incubation time. The more prominent antibacterial effects were observed with both Ag-HA and Cu-HA and the materials antibacterial influence was maintained with respect to time. Ion release studies of each HA composition (15, 30, and 45 days) showed that Cu-HA released significantly more Cu²⁺ (36.1 ± 5.1 mg/L) than Ag⁺ (2.9 ± 1.2 mg/L) from Ag-HA. Analysis of each composition incubated in simulated body fluid (SBF) exhibited surface depositions that are likely calcium phosphate (CaP). Cytocompatibility testing in MC 3T3 Osteoblasts showed slight reductions in cell viability when tested using MTT assay, however cell adhesion studies were positive for each composition.

Antibacterial properties of photochemically prepared AgTiO2 membranes

Biofouling reduces the membrane performance and has become a problem in many applications. One of the strategies to reduce biofouling is to apply antibacterial materials to the membrane surface, which prevents the attachment and growth of microorganisms. In this study, the surface of flat ceramic supports was covered with TiO₂ powder, and silver was applied by photoreduction using a CH₃COOAg solution at room temperature. After the photoreduction, AgO_x and metallic silver were found on the TiO₂ as analyzed by XPS. While a negligible amount of silver was released from the prepared AgTiO₂ membranes into water, the dissolution of silver was enhanced in a 0.09 M NaCl solution. The AgTiO₂ membranes inhibited the growth of Escherichia coli in dark conditions. The inhibition cannot be explained only by the concentration of silver ions released from the membranes. Microscopic observation showed that direct contact with AgTiO₂ kills E. coli. The results showed the possibility of improving the antibacterial activity of membranes by applying an AgTiO₂ coating.

Synthesis of CuO and PAA-Regulated Silver-Carried CuO Nanosheet Composites and Their Antibacterial Properties

With the aid of a facile and green aqueous solution approach, a variety of copper oxide (CuO) with different shapes and polyacrylic-acid (PAA)-regulated silver-carried CuO (CuO@Ag) nanosheet composites have been successfully produced. The point of this article was to propose a common synergy using Ag-carried CuO nanosheet composites for their potential antibacterial efficiency against three types of bacteria such as E. coli, P. aeruginosa, and S. aureus. By using various technical means such as XRD, SEM, and TEM, the morphology and composition of CuO and CuO@Ag were characterized. It was shown that both CuO and CuO@Ag have a laminar structure and exhibit good crystallization, and that the copper source and reaction duration have a sizable impact on the morphology and size distribution of the product. In the process of synthesizing CuO@Ag, the appropriate amount of polyacrylic acid (PAA) can inhibit the agglomeration of Ag NPs and regulate the size of Ag at about ten nanometers. In addition, broth dilution, optical density (OD 600), and electron microscopy analysis were used to assess the antimicrobial activity of CuO@Ag against the above three types of bacteria. CuO@Ag exhibits excellent synergistic and antibacterial action, particularly against S. aureus. The antimicrobial mechanism of the CuO@Ag nanosheet composites can be attributed to the destruction of the bacterial cell membrane and the consequent leakage of the cytoplasm by the release of Ag⁺ and Cu²⁺. The breakdown of the bacterial cell membrane and subsequent leakage of cytoplasm caused by Ag⁺ and Cu²⁺ released from antimicrobial agents may be the cause of the CuO@Ag nanosheet composites' antibacterial action. This study shows that CuO@Ag nanosheet composites have good antibacterial properties, which also provides the basis and ideas for the application research of other silver nanocomposites.

Synthesis of Silver- and Strontium-Substituted Hydroxyapatite with Combined Osteogenic and Antibacterial Activities

Infection in bone transplantation process is attracting considerable attention. The current study synthesizes silver/strontium co-substituted hydroxyapatite (Ag/Sr-HA) nanoparticles with combined osteogenic and antibacterial activities. Different concentrations of silver-substituted hydroxyapatite (Ag-HA) nanoparticles were synthesized by hydrothermal method, and then their physicochemical properties were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), and energy-dispersive X-ray spectroscopy (EDS). Then, Sr was added as secondary element into Ag-HA to improve the biocompatibility of substrate. The antibacterial experiments indicated that Ag-HA had excellent antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The effects of prepared samples on cell proliferation and differentiation were evaluated using MC3T3-E1 cells in vitro. The results showed that Sr substitution enhanced cell proliferation and differentiation, upregulated expression of osteogenic genes, and induced mineralization of cells. The substitution of Sr in Ag/Sr-HA nanoparticles can effectively alleviate the negative effects of Ag and enhance the biological activity of HA. Thus, the synthesized Ag/Sr-HA nanoparticles will serve as a potential candidate for application of biomedical implants with excellent osteogenic and antibacterial ability.

The antimicrobial activity of silver acetate against Acinetobacter baumannii in a Galleria mellonella infection model

Background

The increasing prevalence of bacterial infections that are resistant to antibiotic treatment has caused the scientific and medical communities to look for alternate remedies aimed at prevention and treatment. In addition to researching novel antimicrobials, there has also been much interest in revisiting some of the earliest therapies used by man. One such antimicrobial is silver; its use stretches back to the ancient Greeks but interest in its medicinal properties has increased in recent years due to the rise in antibiotic resistance. Currently antimicrobial silver is found in everything from lunch boxes to medical device implants. Though much is claimed about the antimicrobial efficacy of silver salts the research in this area is mixed.

Methods

Herein we investigated the efficacy of silver acetate against a carbapenem resistant strain of Acinetobacter baumannii to determine the in vitro activity of this silver salt against a World Health Organisation designated category I critical pathogen. Furthermore, we use the Galleria mellonella larvae model to assess toxicity of the compound and its efficacy in treating infections in a live host.

Results

We found that silver acetate can be delivered safely to Galleria at medically relevant and antimicrobial levels without detriment to the larvae and that administration of silver acetate to an infection model significantly improved survival. This demonstrates the selective toxicity of silver acetate for bacterial pathogens but also highlights the need for administration of well-defined doses of the antimicrobial to provide an efficacious treatment.

Beyond the Nanomaterials Approach: Influence of Culture Conditions on the Stability and Antimicrobial Activity of Silver Nanoparticles

Silver nanoparticles (AgNPs) as antimicrobial agents have been extensively studied. It is generally assumed that their inhibitory activity heavily depends on their physicochemical features. Yet, other parameters may affect the AgNP traits and activity, such as culture medium composition, pH, and temperature, among others. In this work, we evaluated the effect of the culture medium physicochemical traits on both the stability and antibacterial activity of AgNPs. We found that culture media impact the physicochemical traits of AgNPs, such as hydrodynamic size, surface charge, aggregation, and the availability of ionic silver release rate. As a consequence, culture media play a major role in AgNP stability and antimicrobial potency. The AgNP minimal inhibitory concentration (MIC) values changed up to 2 orders of magnitude by the influence of culture media alone when single-stock AgNPs were tested on the same strain of Escherichia coli. Furthermore, a meta-analysis of the AgNP MIC values confirms that the "chemical complexity" of culture media influences the AgNP activity. Studies that address only the antimicrobial activities of nanoparticles on common bacterial models should be performed by standardized susceptibility assays, thus generating replicable, comparable reports regarding the antimicrobial potency of nanomaterials.

Structure, morphology, adhesion and in vitro biological evaluation of antibacterial multi-layer HA-Ag/SiO2/TiN/Ti coatings obtained by RF magnetron sputtering for biomedical applications

Biocompatible and antibacterial multi-layer coatings of hydroxyapatite (HA)-Ag/SiO2/TiN/Ti were obtained on the Ti-6Al-4V alloy, by means of the magnetron sputtering technique. During characterization of the coatings, the chemical composition was evaluated by energy dispersive X-ray spectroscopy and the phase analysis was carried out by X-ray diffraction. The morphology of the coatings was observed by field emission scanning electron microscopy, while transmission electron microscopy was used to appreciate their structure. The adhesion of the coatings to the substrate was evaluated by micro scratch test. The in vitro biological response was evaluated in terms of cytotoxicity, adhesion and differentiation of mouse mesenchymal stem cells, as well as adhesion and bacterial viability of Staphylococcus aureus strain. Through the compositional study carried out, the deposition of the HA phase was verified, with a Ca/P ratio close to 1.67 and the characteristic diffraction peaks of this compound. The structural study of the coatings evidenced the obtention of multi-layer architectures. The use of an intermediate SiO2/TiN/Ti trilayer was found to improve adhesion between HA-Ag and the substrate by 84%. Finally, the in vitro biological tests carried out indicated a potentially non-toxic character in the coatings. Additionally, an antibacterial effect was registered at low concentrations of Ag (<0.25 mg/L).

Synthesis and characterization of silver nanoparticle-loaded amorphous calcium phosphate microspheres for dental applications

The goals of this work were (1) to synthesize composite nanostructures comprised of amorphous calcium phosphate (ACP) loaded with silver nanoparticles using a spray pyrolysis method and (2) to demonstrate their potential for use in dental adhesives. Release of silver ions from these nanostructures could provide antibacterial activity, while release of calcium and phosphate ions could promote tooth remineralization. Precursor solutions were prepared with varying silver concentrations corresponding to 5, 10, and 15 mol% of the calcium content, then sprayed into a furnace (550 °C) as droplets with a mean diameter near 2 μm. In this process, each droplet is converted into a single solid microsphere via rapid heating. The synthesized particles were collected using a polymeric filter installed at the end of the reaction zone. Different quantities (2, 5, and 10 wt%) of the nanocomposite material were mixed with a commercially available dental adhesive (Single Bond, 3M ESPE) which was then polymerized into discs for incubation in a solution simulating cariogenic conditions. Release of silver, calcium and phosphorus ions into the solution was measured for 1 month. The nanostructures of ∼10 nm silver nanoparticles embedded into 100 nm to 2 μm ACP particles demonstrated good dispersion in the adhesive resin blend, which in application would shield surrounding tissues from direct contact with silver. The composite nanoparticles provided a quick initial release of ions after which the concentration of calcium, phosphorous, and silver in the incubation solution remained constant or increased slightly. The dispersibility and ion release of the new nanostructures may offer potential for use in dental materials to achieve anti-bacterial and remineralization effects.

Antibacterial properties of doped nanoparticles

Nanoparticles have high potential as antibacterial agents, owing to their ability to produce reactive oxygen species (ROS). Recent studies have indicated that this ROS generation is highly affected by the modification of band structure by the introduction of various dopant materials into them. Thus, doped nanoparticles have been extensively studied in the recent literature. The types of dopants, synthesis techniques, and experimental parameters have been found to affect the overall electronic structure of the material, leading to varied antibacterial efficiency. This review summarizes some of the prominent dopant nanomaterials, various methods of synthesizing doped nanoparticles used against bacterial cells, and the main factors involved in it. Despite the extensive research on the mechanism of the antibacterial action, it is still poorly understood mainly due to the inherent complexities and dynamics in cell membranes. Some of the major proposed mechanisms of action of each kind of dopant nanomaterial have also been reported in this work, focusing on the bacterial cell structure.

In vitro and in vivo evaluation of novel biodegradable Mg-Ag-Y alloys for use as resorbable bone fixation implant

Magnesium (Mg) alloy is gaining more interest because of its degradability and osteogenic potential. Still, it has some deficiencies, such as its rapid degradation rate, insufficient mechanical property. This research aimed to design a novel biodegradable Mg-argentum (Ag)-yttrium (Y) alloy, and Y was added to improve degradable and mechanical property. Mg-Ag-Y alloys were characterized for mechanical features, practicabilities in vitro and in vivo. The mechanical features results shown that this novel component was similar to native bone tissue in elastic moduli, tensile, and compressive stress. Then mesenchymal stem cells (MSCs) were seeded in alloys to assess cell toxicity in vitro. The results showed that its aqueous extract was suitable for MSCs adhesion and proliferation. Then the alloy was evaluated for biomedical applications in nonfractured distal femora of Sprague Dawley rats for 6 weeks, compared with those of pure-Mg and stainless steel groups. All rats survived, and hematological and histological evaluation showed no abnormal physiology 6 weeks postimplantation, and measurements of serum Mg²⁺ concentration were within normal levels. X-ray scanning, microcomputed tomography, and histological examinations were performed to evaluate the degradability and osteogenic potential. The results indicated that the degradation rate of alloy was 0.91 mm per year, (range 0.77-1.22 mm), and pure-Mg 1.80 mm per year (1.43-2.26 mm). The new bone quantity was 3.18 mm³ (1.46-4.44 mm³ ) in Mg-Ag-Y alloys group, 1.39 mm³ (0.54-2.32 mm³ ) in pure-Mg group, and none in stainless steel group. These promising results suggest potential clinical application of Mg-Ag-Y alloys for use as resorbable bone fixation implant. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2059-2069, 2018.

Synthesis of silver nanoparticle-decorated hydroxyapatite (HA@Ag) poriferous nanocomposites and the study of their antibacterial activities

Herein, we demonstrate a facile and green rapid approach for the synthesis of uniform poriferous hydroxylapatite [Ca₁₀(PO₄)₆(OH)₂, HA] and poriferous silver nanoparticle (Ag NPs)-decorated hydroxylapatite (HA@Ag) nanocomposites with excellent antibacterial properties. All the nanocomposites were fully characterized in the solid state via various techniques such as X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), automatic specific surface area and porosity analysis (BET) and field emission scanning electron microscopy (FESEM). The results show that HA has a porous rod-like structure, which the HA@Ag nanocomposites retained, and the surface of HA was loaded with globular-like Ag NPs with an average diameter of about 5.8 nm, which exhibit a well-crystalline state. The experimental parameters such as pH, the molar ratio of HA and Tollens' reagent, and reductant have a significant effect on the size and distribution of the Ag NPs. Moreover, the antimicrobial activities of HA and HA@Ag against Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus) were evaluated via broth dilution, filter paper diffusion, optical density (OD₆₀₀) and electron microscopy observation. The as-prepared HA@Ag nanocomposites exhibit excellent antibacterial activities, especially for S. aureus. The minimum inhibition concentration (MIC) of HA@Ag is only 3.9 μg mL⁻¹.

We demonstrate a facile and green rapid approach for the synthesis of uniform poriferous hydroxylapatite (HA) and poriferous silver nanoparticles (Ag NPs)-decorated hydroxylapatite (HA@Ag) nanocomposites with excellent antibacterial properties.

A novel silver-containing absorbent wound dressing based on spacer fabric

Silver-containing wound dressing based on spacer fabric promotes exuding wound healing through absorbing exudates, keeping moisture, killing bacteria and reducing silver contacting with wound.

Non-sticky and antimicrobial zwitterionic nanocomposite dressings for infected chronic wounds

Zwitterionic poly(sulfobetaine acrylamide) (pSBAA)-based nanocomposite hydrogels can have high potential for the treatment of infected chronic wounds.

Deposition, structure, physical and invitro characteristics of Ag-doped β-Ca3(PO4)2/chitosan hybrid composite coatings on Titanium metal

Pure and five silver-doped (0-5Ag) β-tricalcium phosphate [β-TCP, β-Ca3(PO4)2]/chitosan composite coatings were deposited on Titanium (Ti) substrates and their properties that are relevant for applications in hard tissue replacements were assessed. Silver, β-TCP and chitosan were combined to profit from their salient and complementary antibacterial and biocompatible features.The β-Ca3(PO4)2 powders were synthesized by co-precipitation. The characterization results confirmed the Ag(+) occupancy at the crystal lattice of β-Ca3(PO4)2. The Ag-dopedβ-Ca3(PO4)2/chitosan composite coatings deposited by electrophoresis showed good antibacterial activity and exhibited negative cytotoxic effects towards the human osteosarcoma cell line MG-63. The morphology of the coatings was observed by SEM and their efficiency against corrosion of metallic substrates was determined through potentiodynamic polarization tests.

Designing Ga(iii)-containing hydroxyapatite with antibacterial activity

Incorporation of Ga³⁺ ions into hydroxyapatite under different conditions is studied in detail and its influence on ion-release, antibacterial and cytotoxic properties of the resulting Ga(iii)-containing hydroxyapatites is determined.

An insight into functionalized calcium based inorganic nanomaterials in biomedicine: Trends and transitions

Over the recent years the use of biocompatible and biodegradable nanoparticles in biomedicine has become a significant priority. Calcium based ceramic nanoparticles like calcium phosphate (CaP) and calcium carbonate (CaCO3) are therefore considered as attractive carriers as they are naturally present in human body with nanosize range. Their application in tissue engineering and localized controlled delivery of bioactives for bones and teeth is well established now, but recently their use has increased significantly as carrier of bioactives through other routes also. These delivery systems have become most potential alternatives to other commonly used delivery system because of their cost effectiveness, biodegradability, chemical stability, controlled and stimuli responsive behaviour. This review comprehensively covers their characteristic features, method of preparation and applications but the thrust is to focus their recent development, functionalization and use in systemic delivery. On the same platform mineralization of other nanoparticulate delivery system which has widened their application drug delivery will be discussed. The emphasis has been given on their pH dependent properties which make them excellent carriers for tumour targeting and intracellular delivery. Finally this review also attempts to discuss their drawback which limits their clinical utility.

Natural-based nanocomposites for bone tissue engineering and regenerative medicine: a review

Tissue engineering and regenerative medicine has been providing exciting technologies for the development of functional substitutes aimed to repair and regenerate damaged tissues and organs. Inspired by the hierarchical nature of bone, nanostructured biomaterials are gaining a singular attention for tissue engineering, owing their ability to promote cell adhesion and proliferation, and hence new bone growth, compared with conventional microsized materials. Of particular interest are nanocomposites involving biopolymeric matrices and bioactive nanosized fillers. Biodegradability, high mechanical strength, and osteointegration and formation of ligamentous tissue are properties required for such materials. Biopolymers are advantageous due to their similarities with extracellular matrices, specific degradation rates, and good biological performance. By its turn, calcium phosphates possess favorable osteoconductivity, resorbability, and biocompatibility. Herein, an overview on the available natural polymer/calcium phosphate nanocomposite materials, their design, and properties is presented. Scaffolds, hydrogels, and fibers as biomimetic strategies for tissue engineering, and processing methodologies are described. The specific biological properties of the nanocomposites, as well as their interaction with cells, including the use of bioactive molecules, are highlighted. Nanocomposites in vivo studies using animal models are also reviewed and discussed.

Anti-bacterial surfaces: natural agents, mechanisms of action, and plasma surface modification

This article reviews antibacterial surface strategies based on reactive plasma chemistry, focusing on how plasma-assisted processing of natural antimicrobial agents can produce antifouling and antibacterial materials for biomedical devices.

A continuous method to prepare poorly crystalline silver-doped calcium phosphate ceramics with antibacterial properties

Silver-doped calcium phosphate ceramics were prepared in discontinuous and continuous processes with different amounts of incorporated silver (up to 1.8 wt% silver).

Design of antimicrobial membrane based on polymer colloids/multiwall carbon nanotubes hybrid material with silver nanoparticles

The aim of this study was to obtain membranes with antimicrobial activity presenting a complex sandwich-type structure. The outer layers are comprised of poly(methyl methacrylate) membranes, whereas the inner active layer consists of a modified commercial membrane to achieve antimicrobial properties. This activity arises due to the presence of silver nanoparticles in a material with a hybrid composition deposited on a commercial membrane. This hybrid material consists of polymer colloids and multiwall carbon nanotubes used for both the stabilization of the active layer by the interconnections of the polymer particles and as active component. The filtration tests revealed a good stability of the materials and an increased hydrophilicity of the hybrid membranes. The antimicrobial properties have been evaluated using Staphylococcus aureus and Escherichia coli, and have been correlated with the content and migration rate of silver ions.

Synthesis and spectral characterization of silver/magnesium co-substituted hydroxyapatite for biomedical applications

The present work is aimed at the synthesis of antibacterial and bioactive silver/magnesium co-substituted hydroxyapatite (Ag/Mg-HAP) powders. For this purpose, firstly, different concentrations (0.5, 1.5, 2.5wt.%) of silver substituted HAP (Ag-HAP) powders were prepared by ultrasonic irradiation technique and were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). Secondly, magnesium (Mg) is co-substituted as secondary material into Ag-HAP to offset the potential cytotoxicity of Ag, as higher concentration of Ag is toxic. The antibacterial activity of as-synthesized powders was evaluated by Escherichia coli (E. coli) and was found to be effectively high against bacterial colonization. Also, the in vitro cell-material interaction is evaluated with human osteosarcoma MG63 (HOS MG63) cells for cell proliferation. The results showed the evidence of cytotoxic effects of the higher concentration of Ag-HAP characterized by poor cellular viability whereas, Ag/Mg-HAP showed better cell viability indicating that co-substitution of Mg in Ag-HAP effectively offset the negative effects of Ag and improve performance compared with pure HAP. Thus, the as synthesized Ag/Mg-HAP will serve as a better candidate for biomedical applications with good antibacterial property and bone bonding ability.

Surface modification of titanium substrates with silver nanoparticles embedded sulfhydrylated chitosan/gelatin polyelectrolyte multilayer films for antibacterial application

To develop Ti implants with potent antibacterial activity, a novel "sandwich-type" structure of sulfhydrylated chitosan (Chi-SH)/gelatin (Gel) polyelectrolyte multilayer films embedding silver (Ag) nanoparticles was coated onto titanium substrate using a spin-assisted layer-by-layer assembly technique. Ag ions would be enriched in the polyelectrolyte multilayer films via the specific interactions between Ag ions and -HS groups in Chi-HS, thus leading to the formation of Ag nanoparticles in situ by photo-catalytic reaction (ultraviolet irradiation). Contact angle measurement and field emission scanning electron microscopy equipped with energy dispersive X-ray spectroscopy were employed to monitor the construction of Ag-containing multilayer on titanium surface, respectively. The functional multilayered films on titanium substrate [Ti/PEI/(Gel/Chi-SH/Ag) n /Gel] could efficiently inhibit the growth and activity of Bacillus subtitles and Escherichia coli onto titanium surface. Moreover, studies in vitro confirmed that Ti substrates coating with functional multilayer films remained the biological functions of osteoblasts, which was reflected by cell morphology, cell viability and ALP activity measurements. This study provides a simple, versatile and generalized methodology to design functional titanium implants with good cyto-compatibility and antibacterial activity for potential clinical applications.

Evaluation of the physical and antimicrobial properties of silver doped hydroxyapatite depending on the preparation method

In the present study, the effect of the preparation method on the physical and antibacterial properties of silver doped hydroxyapatite (HAp/Ag) samples was investigated. HAp/Ag with 0.1-5 % of silver was prepared using two different modified wet chemical precipitation methods. A comparison of thermal stability and thermodynamical properties indicated that the thermal stability and sintering temperature of HAp/Ag were higher than those of pure hydroxyapatite if Ca(NO3)2·4H2O, AgNO3, NH4OH and (NH4)2HPO4 were used as raw materials. Phase composition and silver release were determined by XRD and ICP-MS. The study showed that, after 50 h in simulated body fluid 0.8-1.8 % of silver of the total silver amount was released from compact HAp/Ag scaffolds, and release kinetics strongly depended on the HAp/Ag preparation method. In vitro antibacterial activity of samples from each method against the bacterial strains Staphylococcus epidermidis and Pseudomonas aeruginosa was approved. Results showed that, in the case of using Ca(OH)2, H3PO4 and AgNO3 as raw materials for HAp/Ag synthesis, higher antibacterial activity towards both bacterial strains could be obtained.