Triclosan-loaded poly(amido amine) dendrimer for simultaneous treatment and remineralization of human dentine

Characterization of a Novel TiF4 Inclusion Complex and in vitro Evaluation of Its Effect on Inhibiting Enamel Demineralization

INTRODUCTION

Titanium tetrafluoride (TiF4) is an anticariogenic agent with high remineralizing potential. However, the acidic pH of TiF4 solution can limit its clinical application. The present study aimed to prepare and characterize a new TiF4-dendrimer inclusion complex and evaluate its ability to inhibit enamel demineralization under pH cycling conditions.

METHODS

PEG-citrate dendrimer and TiF4-dendrimer inclusion complex were synthesized and their molecular structures were evaluated using Fourier-transform Infrared Spectroscopy (FTIR), Hydrogen Nuclear Magnetic Resonance (HNMR), and Liquid Chromatography-Mass Spectrometry (LC-MS) tests. Forty-eight enamel samples were prepared and randomly divided into four groups: distilled water (negative control), TiF4 solution (T), dendrimer solution (D), and TiF4-dendrimer solution (TD). The microhardness of the samples was measured initially. Next, the samples underwent pH cycling, were exposed to the solutions, the microhardness was measured again, and microhardness loss was calculated. EDX analysis was performed on the surface and cross-sectional segments of the samples.

RESULTS

The microhardness loss was significantly higher in control (-65.1 ± 6.0) compared to other groups. No significant difference was observed between T (-47.9 ± 5.6) and D (-41.7 ± 12.0) and also D and TD (-40.5 ± 9.4) in this regard. Microhardness loss was significantly higher in T compared to TD group. The TD samples showed similar fluoride and titanium content in both surface and subsurface regions, while the T group had higher concentrations in the surface region. Moreover, the TD solution had a higher pH of 3.4 compared to the T solution's pH of 1.1.

CONCLUSION

No significant difference was observed between the efficacy of TiF4-dendrimer and TiF4 solution in inhibiting demineralization while TiF4-dendrimer solution had the added advantage of having a higher pH.

Delivery of biologics: Topical administration

Biologics are unaffordable to a large majority of the global population because of prohibitively expensive fermentation systems, purification and the requirement for cold chain for storage and transportation. Limitations of current production and delivery systems of biologics were evident during the recent pandemic when <2.5% of vaccines produced were available to low-income countries and ∼19 million doses were discarded in Africa due to lack of cold-chain infrastructure. Among FDA-approved biologics since 2015, >90% are delivered using invasive methods. While oral or topical drugs are highly preferred by patients because of their affordability and convenience, only two oral drugs have been approved by FDA since 2015. A newly launched oral biologic costs only ∼3% of the average cost of injectable biologics because of the simplified regulatory approval process by elimination of prohibitively expensive fermentation, purification, cold storage/transportation. In addition, the cost of developing a new biologic injectable product (∼$2.5 billion) has been dramatically reduced through oral or topical delivery. Topical delivery has the unique advantage of targeted delivery of high concentration protein drugs, without getting diluted in circulating blood. However, only very few topical drugs have been approved by the FDA. Therefore, this review highlights recent advances in oral or topical delivery of proteins at early or advanced stages of human clinical trials using chewing gums, patches or sprays, or nucleic acid drugs directly, or in combination with, nanoparticles and offers future directions.

Hydrogel-Encapsulated Biofilm Inhibitors Abrogate the Cariogenic Activity of Streptococcus mutans

We designed and synthesized analogues of a previously identified biofilm inhibitor IIIC5 to improve solubility, retain inhibitory activities, and to facilitate encapsulation into pH-responsive hydrogel microparticles. The optimized lead compound HA5 showed improved solubility of 120.09 μg/mL, inhibited Streptococcus mutans biofilm with an IC50 value of 6.42 μM, and did not affect the growth of oral commensal species up to a 15-fold higher concentration. The cocrystal structure of HA5 with GtfB catalytic domain determined at 2.35 Å resolution revealed its active site interactions. The ability of HA5 to inhibit S. mutans Gtfs and to reduce glucan production has been demonstrated. The hydrogel-encapsulated biofilm inhibitor (HEBI), generated by encapsulating HA5 in hydrogel, selectively inhibited S. mutans biofilms like HA5. Treatment of S. mutans-infected rats with HA5 or HEBI resulted in a significant reduction in buccal, sulcal, and proximal dental caries compared to untreated, infected rats.

Remineralization of Dentinal Lesions Using Biomimetic Agents: A Systematic Review and Meta-Analysis

The objective of this article was to systematically provide an up-to-date review on the different methods of remineralizing human dentine using different biomimetic agents. The authors performed a systematic search within PubMed, Scopus, and Web of Science in addition to the grey literature in Google Scholar^® using MeSH terms. The PICO question was P: human teeth dentinal sections; I: application of biomimetic remineralizing agents; C: other non-biomimetic approaches; O: extent of remineralization and physical properties of remineralized dentine. The initially identified studies were screened for titles and abstracts. Non-English articles, reviews, animal studies, studies involving the resin-dentine interface, and other irrelevant articles were then excluded. The other remaining full-text articles were retrieved. Bibliographies of the remaining articles were searched for relevant studies that could be included. A total of 4741 articles were found, and finally, 39 full-text articles were incorporated in the current systematic review. From these, twenty-six research studies used non-collagenous protein (NCP) analogs to biomineralize dentine, six studies used bioactive materials derived from natural sources, six studies used zinc hydroxyapatite, and one study used amelogenin peptide to induce hydroxyapatite formation on the surface of demineralized dentine. Additive effects of triclosan and epigenin were assessed when combined with commonly available NCPs. Overall, a moderate risk of bias was observed and, hence, the findings of the included studies could be acceptable. A meta-analysis of some similar studies was performed to assess the depth of remineralization and elastic modulus. Despite having high heterogeneity (I² > 90), all the studies showed a significant improvement in biomimetic remineralization efficacy as compared to the control. All the included studies carried out a functional remineralization assessment and found a 90-98% efficacy in the extent of remineralization while the elastic modulus reached 88.78 ± 8.35 GPa, which is close to natural dentine. It is pertinent to note the limitations of these studies that have been carried out in vitro under controlled settings, which lack the effects of a natural oral environment. To conclude, the authors suggest that the biomimetic remineralization of dentine using NCP analogs, bioactive materials, and natural products carries significant potential in treating dentinal lesions; however, more long-term studies are needed to assess their clinical applications in vivo.

New Technological Approaches for Dental Caries Treatment: From Liquid Crystalline Systems to Nanocarriers

Dental caries is the most common oral disease, with high prevalence rates in adolescents and low-income and lower-middle-income countries. This disease originates from acid production by bacteria, leading to demineralization of the dental enamel and the formation of cavities. The treatment of caries remains a global challenge and the development of effective drug delivery systems is a potential strategy. In this context, different drug delivery systems have been investigated to remove oral biofilms and remineralize dental enamel. For a successful application of these systems, it is necessary that they remain adhered to the surfaces of the teeth to allow enough time for the removal of biofilms and enamel remineralization, thus, the use of mucoadhesive systems is highly encouraged. Among the systems used for this purpose, liquid crystalline systems, polymer-based nanoparticles, lipid-based nanoparticles, and inorganic nanoparticles have demonstrated great potential for preventing and treating dental caries through their own antimicrobial and remineralization properties or through delivering drugs. Therefore, the present review addresses the main drug delivery systems investigated in the treatment and prevention of dental caries.

Dendritic Polymers in Tissue Engineering: Contributions of PAMAM, PPI PEG and PEI to Injury Restoration and Bioactive Scaffold Evolution

The capability of radially polymerized bio-dendrimers and hyperbranched polymers for medical applications is well established. Perhaps the most important implementations are those that involve interactions with the regenerative mechanisms of cells. In general, they are non-toxic or exhibit very low toxicity. Thus, they allow unhindered and, in many cases, faster cell proliferation, a property that renders them ideal materials for tissue engineering scaffolds. Their resemblance to proteins permits the synthesis of derivatives that mimic collagen and elastin or are capable of biomimetic hydroxy apatite production. Due to their distinctive architecture (core, internal branches, terminal groups), dendritic polymers may play many roles. The internal cavities may host cell differentiation genes and antimicrobial protection drugs. Suitable terminal groups may modify the surface chemistry of cells and modulate the external membrane charge promoting cell adhesion and tissue assembly. They may also induce polymer cross-linking for healing implementation in the eyes, skin, and internal organ wounds. The review highlights all the different categories of hard and soft tissues that may be remediated with their contribution. The reader will also be exposed to the incorporation of methods for establishment of biomaterials, functionalization strategies, and the synthetic paths for organizing assemblies from biocompatible building blocks and natural metabolites.

A Dentin Biomimetic Remineralization Material with an Ability to Stabilize Collagen

The integrity of collagen matrix structure is a prerequisite for effectively inducing biomimetic remineralization. Repeated low pH stimulation activates matrix metalloproteinases (MMPs) in dental caries. Activated MMPs cause the breakdown of collagen fibrils. Collagen stabilization is a major obstacle to the clinical application of remineralization templates. Here, galardin-loaded poly(amido amine) (PAMAM)-NGV (PAMAM-NGV@galardin, PNG) is constructed to induce collagen stabilization and dentin biomimetic remineralization simultaneously, in order to combat early caries in dentin. PAMAM acts in the role of nucleation template for dentin remineralization, while galardin acts as the role of MMPs inhibitor. NGV peptides modified on the surface of dendrimer core can form small clusters with synergistic movement in short range, and those short-range clusters can form domain areas with different properties on the surface of PAMAM core and restrict the movement of collagen, favoring collagen crosslinking, which can be explained through the computational simulation analysis results. NGV peptides and galardin show a dual collagen-protective effect, laying the foundation for the dentin remineralization effect induced by PAMAM. PNG induces dentin remineralization in an environment with collagenase, meanwhile showsing anti-dentin caries efficacy in vivo. These findings indicate that PNG has great potential to combat early dentin caries for future clinical application.

Lactobacillus cell envelope-coated nanoparticles for antibiotic delivery against cariogenic biofilm and dental caries

Background

Due to their prevalence, dental caries ranks first among all diseases endangering human health. Therefore, the prevention of caries is of great significance, as caries have become a serious public health problem worldwide. Currently, using nanoscale drug delivery systems to prevent caries has received increased attention. However, the preventive efficacy of these systems is substantially limited due to the unique physiological structure of cariogenic biofilms. Thus, novel strategies aimed at combating cariogenic biofilms to improve preventive efficiency against caries are meaningful and very necessary. Herein, inspired by cell membrane coating technology and Lactobacillus strains, we coated triclosan (TCS)-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (TCS@PLGA-NPs) with an envelope of Lactobacillus (LA/TCS@PLGA-NPs) and investigated their potential as a nanoparticle delivery system against cariogenic biofilms and dental caries.

Results

LA/TCS@PLGA-NPs were successfully prepared with favorable properties, including a coated envelope, controllable size, negative charge, sustained drug-release kinetics and so on. The LA/TCS@PLGA-NPs inherited native properties from the source cell surface, thus the LA/TCS@PLGA-NPs adhered to S. mutans, integrated into the S. mutans biofilm, and interfered with the biofilm formation of S. mutans. The nanoparticles significantly inhibited the activity, biomass and virulence gene expression of S. mutans biofilms in vitro. Additionally, LA/TCS@PLGA-NPs exhibited a long-lasting inhibitory effect on the progression of caries in vivo. The safety performance of the nanoparticles is also favorable.

Conclusions

Our findings reveal that the antibiofilm effect of LA/TCS@PLGA-NPs relies not only on the inheritance of native properties from the Lactobacillus cell surface but also on the inhibitory effect on the activity, biomass and virulence of S. mutans biofilms. Thus, these nanoparticles could be considered feasible candidates for a new class of effective drug delivery systems for the prevention of caries. Furthermore, this work provides new insights into cell membrane coating technology and presents a novel strategy to combat bacterial biofilms and associated infections.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01563-x.

Application of Amorphous Calcium Phosphate Agents in the Prevention and Treatment of Enamel Demineralization

Enamel demineralization, as a type of frequently-occurring dental problem that affects both the health and aesthetics of patients, is a concern for both dental professionals and patients. The main chemical composition of the enamel, hydroxyapatite, is easy to be dissolved under acid attack, resulting in the occurrence of enamel demineralization. Among agents for the preventing or treatment of enamel demineralization, amorphous calcium phosphate (ACP) has gradually become a focus of research. Based on the nonclassical crystallization theory, ACP can induce the formation of enamel-like hydroxyapatite and thereby achieve enamel remineralization. However, ACP has poor stability and tends to turn into hydroxyapatite in an aqueous solution resulting in the loss of remineralization ability. Therefore, ACP needs to be stabilized in an amorphous state before application. Herein, ACP stabilizers, including amelogenin and its analogs, casein phosphopeptides, polymers like chitosan derivatives, carboxymethylated PAMAM and polyelectrolytes, together with their mechanisms for stabilizing ACP are briefly reviewed. Scientific evidence supporting the remineralization ability of these ACP agents are introduced. Limitations of existing research and further prospects of ACP agents for clinical translation are also discussed.

Chlorhexidine-loaded poly (amido amine) dendrimer and a dental adhesive containing amorphous calcium phosphate nanofillers for enhancing bonding durability

OBJECTIVE

A novel method of combining chlorhexidine (CHX) loaded poly (amido amine) (PAMAM) dendrimers with a dental adhesive containing amorphous calcium phosphate (ACP) nanofillers are proposed for etch-and-rinse bonding system to enhance resin-dentin bonding durability.

METHODS

The CHX-loaded PAMAM and ACP nanofillers were synthesized and characterized. Their effects on the cytotoxicity were tested by MTT assay. Micro-tensile bond strength (μTBS) before and after thermomechanical challenges were used to evaluate the bonding durability. Anti-matrix metalloproteinase (MMPs) property was examined using in-situ zymography. A double-fluorescence technique was used to examine interfacial permeability after bonding. Dentin remineralization in Ca/P lacking solution was observed under scanning electron microscopy.

RESULTS

Compared with a 0.2 wt% CHX solution, the PAMAM loaded CHX had less cytotoxicity, while the in situ zymography showed it could still inhibit MMPs activity within the hybrid layer after released from PAMAM. The application of the novel method maintained the μTBS better than the control group after thermomechanical challenges, and it did not negatively affect water permeability of the bonding interfaces. CHX-loaded PAMAM regulated the calcium (Ca) and phosphate (P) ions provided by the ACP-containing adhesives to remineralize the demineralized dentin surfaces without initial Ca/P in the environment.

SIGNIFICANCE

The novel method can reduce the cytotoxicity of CHX, inhibit MMPs activities, maintain μTBS, and induce dentin remineralization, which are crucial factors for enhancing bonding durability.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

A novel anticaries agent, honokiol-loaded poly(amido amine) dendrimer, for simultaneous long-term antibacterial treatment and remineralization of demineralized enamel

OBJECTIVE

Existing agents to induce enamel self-repair and inhibit the progression of dental caries in the early stage have been proven to be inadequate and far from satisfactory. In this study, a honokiol-loaded poly(amido amine) (PAMAM) dendrimer (PAMH) was constructed to combat early caries lesions in enamel.

METHODS

PAMH was prepared via a codissolution method. Computational simulation analysis was used to explore the mechanism of honokiol release. The cytotoxicity of PAMH was tested. The antibacterial effects of PAMH were tested by planktonic growth assays and biofilm formation inhibition assays. The remineralization effect of PAMH was examined via transverse microradiography and scanning electron microscopy after a pH cycling model. The in vivo anti-caries effect of PAMH was carried out in a rat model.

RESULTS

Honokiol released from PAMH was slower but more durable in a cariogenic pH environment than in a neutral pH environment, which could be explained through the computational simulation analysis results. Under electrostatic action, P3 beads with the same charge repelled each other and extended outwards, resulting in the rapid expansion of the PAMAM dendrimer and accelerating the release of the drug. At a low pH of 5.5, the protonated P3 beads were not charged and the protonated P1 beads were positively charged. However, the electrostatic repulsive interaction between protonated P1 beads was restricted by the P3 beads in the outermost layer of the PAMAM dendrimer, so the swelling rate was relatively slow, resulting in the slow release of drug molecules in the acidic environment. The cytotoxicity demonstration and the biocompatibility experiment in animal study showed that PAMH is biologically safe. PAMH showed excellent enamel remineralizing ability after pH cycling and showed a long-term antibacterial effect in vitro. Meanwhile, PAMH showed long-term anticaries efficacy in vivo.

SIGNIFICANCE

Our findings indicated that PAMH had great potential to combat early caries lesions in enamel for future clinical application.

Effect of chlorhexidine-loaded poly(amido amine) dendrimer on matrix metalloproteinase activities and remineralization in etched human dentin in vitro

To investigate the effect of chlorhexidine (CHX)-loaded carboxyl-terminated poly (amido amine) dendrimer (CHX-PAMAM-COOH) on matrix metalloproteinase (MMP) activities and remineralization in human dentin, CHX-PAMAM-COOH was prepared and characterized by Fourier-transform infrared spectroscopy. The inhibitory effects of CHX, PAMAM-COOH, and CHX-PAMAM-COOH on soluble recombinant human matrix metalloproteinase (rhMMP-2) and dentin-bound endogenous MMP activity were measured using an MMP Activity Assay Kit. In situ zymography was performed to evaluate the gelatinase activity in dentin pretreated with CHX, PAMAM-COOH, and CHX-PAMAM-COOH. The remineralization of etched dentin pretreated with CHX, PAMAM-COOH, and CHX-PAMAM-COOH was evaluated by field emission-scanning electron microscopy (SEM) and energy disperse spectroscopy (EDS) after incubation in artificial saliva for 14 days. The results of the rhMMP-2 activity assay showed that the MMP-2 activity in the CHX-PAMAM-COOH group and the CHX group decreased significantly to 5.58 ± 0.85% (P < 0.05) and 4.86 ± 1.12% (P < 0.05), respectively, but that in the PAMAM-COOH group increased significantly to 213.38 ± 0.11% (P < 0.05). The results of total MMP activity and in situ zymography showed a significant reduction in endogenous gelatinase activity in dentin in the CHX-PAMAM-COOH group and the CHX group. The SEM and EDS results showed that rod-like crystals were formed on the etched dentin surface in the PAMAM-COOH group and the CHX-PAMAM-COOH group, and their Ca/P ratios were 1.73 and 1.71, respectively. In conclusion, CHX-PAMAM-COOH can inhibit dentin-bound endogenous MMPs and induce remineralization in etched dentin simultaneously. However, it is important to note that the catalytic role of PAMAM dendrimers may have an undesired excitatory effect on MMP activity, which cannot be ignored if PAMAM dendrimers were used alone in the oral environment.

Novel dental implant modifications with two-staged double benefits for preventing infection and promoting osseointegration in vivo and in vitro

Peri-implantitis are a major problem causing implant failure these days. Accordingly, anti-infection during the early stage and subsequent promotion of osseointegration are two main key factors to solve this issue. Micro-arc oxidation (MAO) treatment is a way to form an oxidation film on the surface of metallic materials. The method shows good osteogenic properties but weak antibacterial effect. Therefore, we developed combined strategies to combat severe peri-implantitis, which included the use of a novel compound, PD, comprising dendrimers poly(amidoamine) (PAMAM) loading dimethylaminododecyl methacrylate (DMADDM) as well as MAO treatment. Here, we explored the chemical properties of the novel compound PD, and proved that this compound was successfully synthesized, with the loading efficiency and encapsulation efficiency of 23.91% and 31.42%, respectively. We further report the two-stage double benefits capability of PD + MAO: (1) in the first stage, PD + MAO could decrease the adherence and development of biofilms by releasing DMADDM in the highly infected first stage after implant surgery both in vitro and in vivo; (2) in the second stage, PD + MAO indicated mighty anti-infection and osteoconductive characteristics in a rat model of peri-implantitis in vivo. This study first reports the two-staged, double benefits of PD + MAO, and demonstrates its potential in clinical applications for inhibiting peri-implantitis, especially in patients with severe infection risk.

Remineralization of dentine tubules induced by phosphate-terminated PAMAM dendrimers

Various sealants have been developed to treat the exposure of dentinal tubules (DTs) and further dental hypersensitivity. Herein, the phosphate-terminated fourth generation polyamidoamine dendrimers (PAMAM-PO₃H₂) was successfully synthesized. Six duplicates of demineralized dentin and type I collagen matrix were incubated in artificial saliva solution with or without PAMAM-PO₃H₂ treatment at 37 °C for 2 weeks, respectively. The artificial saliva solution was replaced every day. These regenerated crystals on the surface of dentin and collagen matrix were confirmed to be hydroxyapatite (HAp). The approach thus demonstrates that PAMAM-PO₃H₂ can offer an efficient therapy for seal DTs in clinical dentistry.

Dendrimers against fungi - A state of the art review

Fungal based diseases currently affect nearly a quarter of the population around the world, which diseases are usually limited to superficial infections. Perversely, along with the development of modern medicine, cases of life-threatening systemic fungi are more and more often encountered. Compared to antibacterial drugs, significantly fewer fungicides are tested and introduced to clinical practice. At the same time, the drug resistance of pathological fungi is constantly growing. In addition to obtaining new derivatives of already-established classes of drugs, such as azoles, there is a growing interest in new compounds with potentially new mechanisms and application possibilities. Polymers are included in the flow of these studies, and among them - dendrimers. Dendrimers are a special type of polymers with a strictly defined structure and a plethora of functionalization possibilities. This allows them to not only be used as effective antifungal drug carriers but also enables them to exhibit antifungal activity per se. In this review, we have introduced to the epidemiology of fungal infections and summarized the aspects related to their control and therapy. Various polymers and dendrimers with antifungal activity were presented. In the subsequent sections antifungal acting dendrimers were discussed within three subchapters, based on their chemical structure: (i) amino acid-based dendrimers, (ii) amino based dendrimers, and (iii) other, which do not share similarities in structure. We have gathered and summarized the reports regarding the direct action of dendrimers on infectious fungi, as well as their effect when used as solubilizers, carriers or adjuvants with currently used antifungals. Use of dendrimers for the sensing of fungi or their metabolites are also considered. Special attention was also paid to the applications of dendrimers together with photosensitizers in antimicrobial photodynamic therapy.

[Research progress on the biomimetic remineralization of hard tooth tissues based on polyamide-amine dendrimer]

Polyamide-amine (PAMAM) dendrimer, a new hyperbranched macromolecular polymer, is considered an "artificial protein" by many scholars on account of its excellent chemical and biological characteristics. PAMAM has internal cavities and a large number of reactive terminal groups. These structures allow the polymer to be used as a bionic macromoleculethat could simulate the biomimetic mineralization of the natural organic matrix on the surface of tooth tissue. Specifically, PAMAM can beused as an organic template to regulate mineral nucleation and crystal growth; thus, the polymerisa more ideal dental restoration material than traditional allogenic materials. This article reviews research progress on thePAMAM-induced biomimetic mineralization of hard tooth tissues.

Advances of Anti-Caries Nanomaterials

Caries is the most common and extensive oral chronic disease. Due to the lack of anti-caries properties, traditional caries filling materials can easily cause secondary caries and lead to treatment failure. Nanomaterials can interfere with the bacteria metabolism, inhibit the formation of biofilm, reduce demineralization, and promote remineralization, which is expected to be an effective strategy for caries management. The nanotechnology in anti-caries materials, especially nano-adhesive and nano-composite resin, has developed fast in recent years. In this review, the antibacterial nanomaterials, remineralization nanomaterials, and nano-drug delivery systems are reviewed. We are aimed to provide a theoretical basis for the future development of anti-caries nanomaterials.

Emerging Applications of Drug Delivery Systems in Oral Infectious Diseases Prevention and Treatment

The oral cavity is a unique complex ecosystem colonized with huge numbers of microorganism species. Oral cavities are closely associated with oral health and sequentially with systemic health. Many factors might cause the shift of composition of oral microbiota, thus leading to the dysbiosis of oral micro-environment and oral infectious diseases. Local therapies and dental hygiene procedures are the main kinds of treatment. Currently, oral drug delivery systems (DDS) have drawn great attention, and are considered as important adjuvant therapy for oral infectious diseases. DDS are devices that could transport and release the therapeutic drugs or bioactive agents to a certain site and a certain rate in vivo. They could significantly increase the therapeutic effect and reduce the side effect compared with traditional medicine. In the review, emerging recent applications of DDS in the treatment for oral infectious diseases have been summarized, including dental caries, periodontitis, peri-implantitis and oral candidiasis. Furthermore, oral stimuli-responsive DDS, also known as "smart" DDS, have been reported recently, which could react to oral environment and provide more accurate drug delivery or release. In this article, oral smart DDS have also been reviewed. The limits have been discussed, and the research potential demonstrates good prospects.

Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry

Failure of dental treatments is mainly due to the biofilm accumulated on the dental materials. Many investigations have been conducted on the advancements of antimicrobial dental materials. Polymeric and inorganic nanoscopical agents are capable of inhibiting microorganism proliferation. Applying them as fillers in dental materials can achieve enhanced microbicidal ability. The present review provides a broad overview on the state-of-the-art research in the field of antimicrobial fillers which have been adopted for incorporation into dental materials over the last 5 years. The antibacterial agents and applications are described, with the aim of providing information for future investigations. STATEMENT OF SIGNIFICANCE: Microbial infection is the primary cause of dental treatment failure. The present review provides an overview on the state-of-art in the field of antimicrobial nanoscopical or polymeric fillers that have been applied in dental materials. Trends in the biotechnological development of these antimicrobial fillers over the last 5 years are reviewed to provide a backdrop for further advancement in this field of research.

Natural protein bioinspired materials for regeneration of hard tissues

This review describes the protein bioinspired materials for the repair of hard tissues such as enamel, dentin and bone.

The potential of dendrimer in delivery of therapeutics for dentistry

Dendrimers are hyperbranched nanoparticle structures along with its surface modifications can to be used in dental biomaterials for biomimetic remineralisation of enamel and dentin. The review highlights the therapeutic applications of dendrimers in the field of dentistry. It addresses the possible mechanisms of enhancement of mechanical properties of adhesives and resins structure. Dendrimers due to its unique construction of possessing inner hydrophobic and outer hydrophilic structure can act as drug carrier for delivery of antimicrobial drugs for treatment of periodontal diseases and at peripheral dental implant areas. Dendrimers due to its hyperbranched structures can provides a unique drug delivery vehicle for delivery of a drug at specific site for sustained release for therapeutic effects. Thus, dendrimers can be one of the most important constituents which can be incorporated in dental biomaterials for better outcomes in dentistry.

The inhibitory effect of carboxyl-terminated polyamidoamine dendrimers on dentine host-derived matrix metalloproteinases in vitro in an etch-and-rinse adhesive system

The biomimetic remineralization of collagen fibrils has increased interest in restoring the demineralized dentine generated by dental caries. Carboxyl-terminated polyamidoamine dendrimers (PAMAM-COOH), hyperbranched polymeric macromolecules, can act as non-collagenous proteins to induce biomimetic remineralization on a dentine organic matrix. However, in vivo remineralization is an extremely time-consuming process; before complete remineralization, demineralized dentine collagen fibrils are susceptible to degradation by host-derived matrix metalloproteinases (MMPs). Therefore, we examined the effect of fourth-generation PAMAM-COOH (G4-PAMAM-COOH) on the collagenolytic activities of endogenous MMPs, the interaction between G4-PAMAM-COOH and demineralized dentine collagen and the influence of G4-PAMAM-COOH pre-treatment on resin-dentine bonding. G4-PAMAN-COOH not only inhibited exogenous soluble rhMMP9 but also hampered the proteolytic activities of dentine collagen-bound MMPs. Cooperated with the results of G4-PAMAM-COOH absorption and desorption, FTIR spectroscopy provided evidence for the exclusive electrostatic interaction rather than hydrogen or covalent bonding between G4-PAMAM-COOH and dentine collagen. Furthermore, G4-PAMAM-COOH pre-treatment showed no damage to resin-dentine bonding because it did not significantly decrease the elastic modulus of the demineralized dentine, degree of conversion, penetration of the adhesive into the dentinal tubules or ultimate tensile strength. Thus, G4-PAMAM-COOH can effectively inactivate MMPs, retard the enzymolysis of collagen by MMPs and scarcely influence the application of resin-dentine bonding.

pH-Responsive polymeric nanocarriers for efficient killing of cariogenic bacteria in biofilms

Traditional antibacterial treatments, such as chlorhexidine (CHX), destroy cariogenic biofilms. However, they exert negative effects in clinical applications, for example, teeth staining, taste disturbance and harm to oral tissue after a long-term exposure. Therefore, biocompatible strategies for efficient antibacterial drug delivery are in high demand. In this study, aimed at dental caries therapy enhancement, we designed a pH-responsive nanocarrier system, capable of releasing CHX in an acidic environment within cariogenic biofilms. Cationic poly(ethylene glycol)-block-poly(2-(((2-aminoethyl)carbamoyl)oxy)ethyl methacrylate) (PEG-b-PAECOEMA) was synthesized first. Modification of PAECOEMA by citraconic anhydride (CA) forms negatively charged PEG-b-PAECOEMA/CA, which could assemble into core-shell polyionic complex micelles (PICMs) when mixed with cationic CHX via electrostatic interactions. PICMs are stable in healthy neutral oral microenvironments with CHX encapsulated in the core and PEG shell exposed. Once in acidic milieu within caries-producing biofilms, they rapidly disassemble and release CHX cargo owing to degradation of citraconic amide groups. Molecular structures of the above copolymers were confirmed using 1H NMR and gel permeation chromatography (GPC) analysis. The pH-dependent degradation rates of citraconic amide in PEG-b-PAECOEMA/CA copolymer were measured by fluorescamine method. Atomic force microscopy (AFM) studies confirmed successful assembly of well-defined spherical PICMs in aqueous solution. The disassembly of PICMs in acidic microenvironment was observed using dynamic light scattering (DLS). PICMs showed an obvious pH-dependent drug release profile when the pH changed from 7.4 to 5.5. More importantly, the micellar system could reduce drug toxicity of CHX and exhibited outstanding antibacterial capability in the biofilm of Streptococcus mutans. Micelles constructed from pH-sensitive PEG-b-PAECOEMA/CA are highly promising for dental caries therapy and provide guidelines for drug-delivery system design in other acidic pathologic systems.

Recent Advances in Remineralization Therapies for Caries Lesions

Remineralization of caries lesions is naturally achieved by salivary ions, and it can be enhanced by external factors or elements such as fluoride. Numerous studies have demonstrated the remineralizing efficacy of fluoride therapies as well as the limitations with some groups of the population. Consequently, developing new remineralization therapies to close this gap in efficacy has been a priority for the last 2 decades. In this review, we summarize and briefly discuss some of the latest advances in remineralization therapies. Most new therapies try to enhance the effect of fluoride by adding other potentially active ingredients to the formulation, such as calcium, phosphate, stannous, xylitol, and arginine. Other remineralization strategies have focused on creating remineralizing scaffolds within the lesions (e.g., self-assembling peptides). While several of the new remineralization strategies have progressed significantly in recent years, for most of them, the evidence is still insufficient to assess their true clinical potential.

One-step phosphorylated poly(amide-amine) dendrimer loaded with apigenin for simultaneous remineralization and antibacterial of dentine

Dental caries, starting from demineralization of enamel and dentine, is closely related with acid-producing bacteria in oral cavity, for example, Streptococcus mutans. Remineralization is an efficient way to prevent the disease progression and facilitate the therapy of incipient caries. Therefore, for the purpose of effective dentine repair, remineralization and antibacterial should be combined simultaneously. However, most of the literatures only focus on one single aspect, while combing remineralization and antibacteria for dentine repair in one system is rarely reported. Here in this work, phosphoryl-terminated poly(amide-amine) dendrimers were loaded with apigenin, a water-nonsoluble drug antibacterial agains Streptococcus mutans. The apigenin-loaded dendrimers bind strongly with dentine, which further induce dentine tubules occlusion through mineralization in artificial saliva, and the release of apigenin can prevent further erosion of dentine by bacteria. Meanwhile, the phosphorylated dendrimers are easily prepared by one-step modification of poly(amide-amine) and exhibit good cytocompatibility. This strategy developed here can provide reference for the design of effective anti-caries materials.

Selective removal and preconcentration of triclosan using a water-compatible imprinted nano-magnetic chitosan particles

A water-compatible magnetic triclosan (TCS) imprinted material (TCS-CTS-Fe⁰-MIPs) was synthesized for selective enrichment and detection of TCS in real complex water samples. The material was synthesized by using chitosan (CTS) as functional monomer, which has rich surface O- and N-containing functional groups. The TCS imprinted CTS was coated on Fe⁰ surface and then cross-linked with glutaraldehyde. Scanning electron microscopy suggested that the imprinted material was covered with a layer of imprinted film, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirmed that the imprinted material had more functional groups (amino and hydroxyl groups) than that of non-imprinted material. The TCS imprinted and non-imprinted materials used in each adsorption experiments were 0.1 mg mL^-1. The maximum adsorption capacity of the TCS imprinted material and non-TCS imprinted material were 20.86 and 15.11 mg g^-1, respectively. The adsorption results showed that selectivity coefficient was 10.151, 1.353, and 8.271 in the presence of p-chlorophenol, 2,4,6-trichlorophenol, and bisphenol-A, respectively. The recoveries of river water and lake water samples were 92.8, 91.3, 92.4, and 81.4, 82.3, 82.1%, respectively, when the samples were spiked with 4, 6, and 8 μg L^-1 of TCS with the imprinted material. The adsorption capacity of the TCS imprinted material and non-TCS imprinted material lost 5.2 and 6.2% after six times of recycling. The high selectivity and excellent adsorption capacity of the imprinted material can be attributed to the presence of sterically complementary imprinted sites and high surface, which would also made it more accessible to TCS than that of non-imprinted material. The present study would provide an environmental friendly and convenient method for the removal and the monitoring of TCS in environmental water samples.

In vivo analyses of the effects of polyamidoamine dendrimer on dentin biomineralization and dentinal tubules occlusion

This study evaluated the biomineralization and dentinal tubules occlusion abilities of the carboxyl-terminated polyamidoamine dendrimer (PAMAM-COOH) on human demineralized dentin in vivo at different time points. Demineralization dentin model with and without treated with PAMAM-COOH were sutured to the interior side of the rat's cheeks, that was incubated in the rats' saliva for 2, 4 and 6 weeks respectively. Finally, the newly formed precipitates were characterized by SEM, EDS, XRD and microhardness test. The hydroxyapatite (HA) on the dentin treated with PAMAM-COOH were formed gradually with the time going by, and the regenerated HA has a similar crystal structure with natural dentin, whereas the crystallites did not exist on the control group. The microhardness of PAMAM-COOH-applied specimens had a significantly higher than those without application. These results suggest that the PAMAM-COOH promoted the biomineralization of demineralized dentin and displayed favourable effects on blocking the open dentinal tubules.

[Research progress on a nanodrug delivery system for prevention and control of dental caries and periodontal diseases]

Dental caries and periodontal diseases are common chronic infectious diseases that cause serious damage to oral health. Bacteria is the primary factor leading to such conditions. As a dental plaque control method, chemotherapeutic agents face serious challenges in dental care because of the specific physiological and anatomical characteristics of the oral cavity. Nanodrug delivery system is a series of new drug delivery systems at nanoscale, and it can target cells, promote sustainedrelease effects, and enhance biodegradation. This review focuses on research progress on nanodrug delivery systems for prevention and control of dental caries and periodontal diseases.

Advances in polymeric materials for dental applications

This review focuses on the relationship between the structures and properties of various polymers for different applications in dentistry.

From molecules to macrostructures: recent development of bioinspired hard tissue repair

This review summarizes the bioinspired strategies for hard tissue repair, ranging from molecule-induced mineralization, to microscale assembly to macroscaffold fabrication.

Functional dendritic compounds: potential prospective candidates for dental restorative materials and in situ re-mineralization of human tooth enamel

This review provides a snapshot of recent progress in the synthesis and application of dendritic compounds as potential prospective candidates for dental restorative materials andin siture-mineralization of human tooth enamel.

Substrate-anchored and degradation-sensitive anti-inflammatory coatings for implant materials

Implant materials need to be highly biocompatible to avoid inflammation in clinical practice. Although biodegradable polymeric implants can eliminate the need for a second surgical intervention to remove the implant materials, they may produce acidic degradation products in vivo and cause non-bacterial inflammation. Here we show the strategy of “substrate-anchored and degradation-sensitive coatings” for biodegradable implants. Using poly(lactic acid)/hydroxyapatite as an implant material model, we constructed a layer-by-layer coating using pH-sensitive star polymers and dendrimers loaded with an anti-inflammatory drug, which was immobilised through a hydroxyapatite-anchored layer. The multifunctional coating can effectively suppress the local inflammation caused by the degradation of implant materials for at least 8 weeks in vivo. Moreover, the substrate-anchored coating is able to modulate the degradation of the substrate in a more homogeneous manner. The “substrate-anchored and degradation-sensitive coating” strategy therefore exhibits potential for the design of various self-anti-inflammatory biodegradable implant materials.

Methods for biomimetic remineralization of human dentine: a systematic review

This study aimed to review the laboratory methods on biomimetic remineralization of demineralized human dentine. A systematic search of the publications in the PubMed, TRIP, and Web of Science databases was performed. Titles and abstracts of initially identified publications were screened. Clinical trials, reviews, non-English articles, resin-dentine interface studies, hybrid layer studies, hybrid scaffolds studies, and irrelevant studies were excluded. The remaining papers were retrieved with full texts. Manual screening was conducted on the bibliographies of remaining papers to identify relevant articles. A total of 716 studies were found, and 690 were excluded after initial screening. Two articles were identified from the bibliographies of the remaining papers. After retrieving the full text, 23 were included in this systematic review. Sixteen studies used analogues to mimic the functions of non-collagenous proteins in biomineralization of dentine, and four studies used bioactive materials to induce apatite formation on demineralized dentine surface. One study used zinc as a bioactive element, one study used polydopamine, and another study constructed an agarose hydrogel system for biomimetic mineralization of dentine. Many studies reported success in biomimetic mineralization of dentine, including the use of non-collagenous protein analogues, bioactive materials, or elements and agarose hydrogel system.

Recent developments and applications of bioinspired dendritic polymers

This review highlights the bioinspired applications of dendritic polymers, focusing on their structure–function relationship to natural biomolecules such as proteins.

Modulated regeneration of acid-etched human tooth enamel by a functionalized dendrimer that is an analog of amelogenin

In the bioinspired repair process of tooth enamel, it is important to simultaneously mimic the organic-matrix-induced biomineralization and increase the binding strength at the remineralization interface. In this work, a fourth-generation polyamidoamine dendrimer (PAMAM) is modified by dimethyl phosphate to obtain phosphate-terminated dendrimer (PAMAM-PO3H2) since it has a similar dimensional scale and peripheral functionalities to that of amelogenin, which plays important role in the natural development process of enamel. Its phosphate group has stronger affinity for calcium ion than carboxyl group and can simultaneously provide strong hydroxyapatite (HA)-binding capability. The MTT assay demonstrates the low cytotoxicity of PAMAM-PO3H2. Adsorption tests indicate that PAMAM-PO3H2 can be tightly adsorbed on the human tooth enamel. Scanning electron microscopy and X-ray diffraction are used to analyze the remineralization process. After being incubated in artificial saliva for 3weeks, there is a newly generated HA layer of 11.23μm thickness on the acid-etched tooth enamel treated by PAMAM-PO3H2, while the thickness for the carboxyl-terminated one (PAMAM-COOH) is only 6.02μm. PAMAM-PO3H2 can regulate the remineralization process to form ordered new crystals oriented along the Z-axis and produce an enamel prism-like structure that is similar to that of natural tooth enamel. The animal experiment also demonstrates that PAMAM-PO3H2 can induce significant HA regeneration in the oral cavity of rats. Thus PAMAM-PO3H2 shows great potential as a biomimetic restorative material for human tooth enamel.