Preparation, characterization and utilization of starch nanoparticles

Facile and eco-friendly method of starch nanocrystals esterified with oleic acid using natural clay as a catalyst: Synthesis, Box-Behnken optimization, characterization and analysis of thermal and antioxidant properties

This study investigates the synthesis of corn starch nanocrystals (SNCs) via sulfuric acid hydrolysis. Esterification of oleic acid (OA) with SNCs was carried out using Maghnite-H+ as a catalyst, a non-polluting, eco-friendly proton-exchanged montmorillonite-based green catalyst suitable for various chemical processes. Optimization of synthesis parameters, including reaction temperature, duration, and catalyst quantity, was conducted using response surface methodology (RSM) with a central composite design incorporating three factors and three levels. Optimal conditions for achieving a high degree of substitution (DS) were determined as follows: 21.27 h reaction time, 106.39 °C temperature, and 15.17 % (by weight of starch) Maghnite-H+ catalyst, with a molar ratio of OA to anhydrous glucose units of 3:1. Characterization of the esterification product was performed using FTIR spectroscopy, while electron microscopy (SEM) and X-ray diffraction (XRD) analyses revealed significant changes in appearance and internal structure post-esterification. Thermal analysis indicated lower heat resistance for SNCs-OA compared to native starch and SNCs. Furthermore, both esterified and unmodified SNCs exhibited antioxidant properties, with activity comparable to standard antioxidant vitamin C (ascorbic acid), as measured by their ability to neutralize free radicals, which increased with SNCs concentration. This comprehensive study offers valuable insights into the synthesis, characterization, and functional properties of SNCs-OA.

Preparation and physicochemical properties of OSA modified Cyperus esculentus starch nanoparticles

The aim of this study was to investigate the Octenyl succinic anhydride (OSA) modification and nanonization of Cyperus esculentus starch (CES) on its physicochemical properties. Cyperus esculentus starch nanoparticles (SNPs) were prepared by nanoprecipitation method and modified with OSA. The results showed that the average particle size of the prepared SNPs was 125.25 nm, and the OSA modified nanoparticles (OS-SNPs) were between 411.16 and 442.07 nm. Chemical group analysis indicated the successful esterification reaction of OSA. Crystallographic structure analysis showed that the crystalline type of CES remained unchanged after OSA modification, but the crystallinity was slightly decreased. Moreover, SNPs exhibited a V-type diffraction peak. Morphological observation results showed that the hydrophobic groups introduced after OSA modification of SNPs had caused particle deformation and formed a network structure. In addition, the gelatinization temperature of starch decreased after OSA modification, and the gelatinization temperature could no longer be measured after nanonization. The OSA modified CES (OS-CES) had shown higher viscosity, swelling power and solubility during the gelatinization process. While the nanonized samples had no obvious viscosity change during the heating process, the solubility remained at a relatively high level of 70-90 %.

The latest research progress on polysaccharides-based biosensors for food packaging: A review

In recent years, polysaccharide-based biosensors have emerged as promising technologies for intelligent food packaging, offering innovative solutions to enhance food quality and safety. This review highlights advancements in designing, developing, and applying these biosensors, particularly those utilizing polysaccharides such as chitosan, cellulose and alginate. Engineered with nanomaterials like ZnO, silver, and carbon nano-tubes demonstrated high sensitivity in real-time monitoring of food spoilage indicators, including pH changes, volatile nitrogen compounds and microbial activity. We discuss the electrochemical properties of these biosensors, highlighting how the integration of electrochemical methods significantly improves their detection capabilities within packaging environments, leading to sensor sensitivity enhancement, greater accuracy, and spoilage detection, ultimately extending the shelf life of perishable food products. Additionally, the review addresses the practical challenges of industrial implementation and explores future research directions for optimizing sensor functionality and scalability. The findings underscore the potential of polysaccharide-based intelligent packaging as a sustainable and effective alternative to conventional methods, paving the way for broader commercial adoption.

The Role of Starch Incorporation into Waterborne Acrylic-Hybrid Nanoparticles for Film-Forming Applications

The use of biopolymers as an alternative to petroleum-based polymers offers a sustainable solution with benefits such as biodegradability and unique functionalities. In this study, starch/zein bioparticles (BPs) obtained by nanoprecipitation were employed to synthesize acrylic polymer/biopolymer waterborne nanoparticles with excellent film formation capability. These hybrid nanoparticle dispersions were obtained through a semibatch emulsion polymerization using the previously synthesized BPs as seed and variable monomeric formulations composed of butyl acrylate and methyl methacrylate. A synergetic effect between acrylic and biopolymer phases was evidenced where the incorporation of BPs had a fundamental role in improving sensitive properties, such as film blocking resistance, while attaining smooth films at room temperature. These excellent film-forming properties of starch/acrylic hybrid latexes without requiring the addition of formulation agents, which depict an important benefit from an environmental viewpoint, demonstrate that they represent a promising alternative for the development of a new generation of eco-friendly binders.

Avocado Seed Starch-Based Films Reinforced with Starch Nanocrystals

Biopolymers derived from biomass can provide the advantages of both biodegradability and functional qualities from a circular economy point of view, where waste is transformed into raw material. In particular, avocado seeds can be considered an interesting residue for biobased packaging applications due to their high starch content. In this work, avocado seed starch (ASS)-based films containing different glycerol concentrations were prepared by solvent casting. Films were also reinforced with starch nanocrystals (SNCs) obtained through the acid hydrolysis of ASS. The characterization of the extracted starch and starch nanocrystals by scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis has been reported. Adding 1% of SNCs increased elastic modulus by 112% and decreased water vapor permeability by 30% with respect to neat matrix. Interestingly, the bioactive compounds from the avocado seed provided the films with high antioxidant capacity. Moreover, considering the long time required for traditional plastic packaging to degrade, all of the ASS-based films disintegrated within 48 h under lab-scale composting conditions. The results of this work support the valorization of food waste byproducts and the development of reinforced biodegradable materials for potential use as active food packaging.

Ozone modification of waxy rice starch nanocrystals: Effects on the multi-scale structural and surface properties

The rich active hydroxyl groups on starch nanocrystals (SNC) surface limits its dispersion and stability in the aqueous phase. To address this issue, ozone modification for 0 (SNC), 0.5 (SNC-1), 1 (SNC-2), 1.5 (SNC-3), and 2 h (SNC-4) as compared to conventionally chemical methods was applied to functionally modify the SNC. The impact of ozone treatment on the structural and surface characteristics of waxy rice starch nanocrystals. The findings revealed that longer ozone treatment durations favored the formation of carbonyl groups in starch molecules. Initially, ozone oxidized the hydroxyl group of the macromolecule. Once the carbonyl groups formed, the cross-linking reaction occurred among starch nanocrystals through condensation reactions, leading to the increasing molecular orderliness. X-ray photoelectron spectroscopy, X-ray diffraction and Small-angle X-ray scattering analyses of SNC-2 supported this finding with a reduced O/C ratio, and implied that surface oxidation did not alter the crystal type but rather enhanced molecular hydration in an aqueous system, leading to increased interfacial thickness and fractal dimension. Additionally, ozone oxidation improved surface properties such as charge and hydrophobicity. Oxidized SNC also exhibited altered gelatinization properties due to surface degradation. This study offers a promising strategy for enhancing SNC surface properties, crucial for food science applications.

Impact of ultrasound process on cassava starch nanoparticles and Pickering emulsions stability

Using green techniques to convert native starches into nanoparticles is an interesting approach to producing stabilizers for Pickering emulsions, aiming at highly stable emulsions in clean label products. Nanoprecipitation was used to prepare the Pickering starch nanoparticles, while ultrasound technique has been used to modulate the size of these nanoparticles at the same time as the emulsion was developed. Thus, the main objective of this study was to evaluate the stabilizing effect of cassava starch nanoparticles (SNP) produced by the nanoprecipitation technique combined with ultrasound treatment carried out in the presence of water and oil (more hydrophobic physicochemical environment), different from previous studies that carry out the mechanical treatment only in the presence of water. The results showed that the increased ultrasound energy input could reduce particle size (117.58 to 55.75 nm) and polydispersity (0.958 to 0.547) in aqueous dispersions. Subsequently, Pickering emulsions stabilized by SNPs showed that increasing emulsification (ultrasonication) time led to smaller droplet sizes and monomodal size distribution. Despite flocculation, long-term ultrasonication (6 and 9 min) caused little variation in the droplet size after 7 days of storage. The cavitation effects favored the interaction between oil droplets through weak attraction forces and particle sharing, favoring the Pickering stabilization against droplet coalescence. Our results show the potential to use only physical modifications to obtain nanoparticles that can produce coalescence-stable emulsions that are environmentally friendly.

Recent Advances in Physical Processing Techniques to Enhance the Resistant Starch Content in Foods: A Review

The physical modification of starch to produce resistant starch (RS) is a viable strategy for the glycemic index (GI) lowering of foods and functionality improvement in starchy food products. RS cannot be digested in the small intestine but can be fermented in the colon to produce short-chain fatty acids rather than being broken down by human digestive enzymes into glucose. This provides major health advantages, like better blood sugar regulation, weight control, and a lower chance of chronic illnesses. This article provides a concise review of the recent developments in physical starch modification techniques, including annealing, extrusion, high-pressure processing, radiation, and heat-moisture treatment. Specifically, the focus of this paper is on the alteration of the crystalline structure of starch caused by the heat-moisture treatment and annealing and its impact on the resistance of starch to enzymatic hydrolysis, as well as the granular structure and molecular arrangement of starch caused by extrusion and high-pressure processing, and the depolymerization and crosslinking that results from radiation. The impacts of these alterations on starch's textural qualities, stability, and shelf life are also examined. This review demonstrates how physically modified resistant starch can be used as a flexible food ingredient with both functional and health benefits. These methods are economically and ecologically sustainable since they successfully raise the RS content and improve its functional characteristics without the need for chemical reagents. The thorough analysis of these methods and how they affect the structural characteristics and health advantages of RS emphasizes the material's potential as an essential component in the creation of functional foods that satisfy contemporary dietary and health requirements.

Value addition of mango kernel for development and characterization of starch with starch nanoparticles for packaging applications

The present research was conducted to explore the potential of mango kernel starch from the Chaunsa variety to develop starch and starch nanoparticles (SNPs) based films. The investigation included starch isolation from mango kernel followed by the preparation of SNPs by acid hydrolysis and a thorough examination of various physicochemical properties for film formation. The properties of SNPs were found to be distinctly different from those of native starch. SNPs exhibited an aggregated form with an irregular surface, whereas native starch had an oval and elongated shape with a smooth surface. X-ray diffraction (XRD) analysis confirmed that the starch type in SNPs was of the A-type. Additionally, the pasting properties of SNPs were minimal due to the acid hydrolysis process. SNP-based composite film was developed with (5 %) SNP concentration added. This successful incorporation of SNPs enhanced biodegradability, with complete degradation occurring within three weeks. Moreover, the composite films displayed increased burst strength, measuring 1303.51 ± 73.7 g, and lower water vapor transmission rates (WVTR) at (7.40 ± 0.50) × 10-3 g per square meter per second and reduced water solubility at 35.32 ± 3.0 %. This development represents a significant advancement in the field of eco-friendly packaging materials.

A Comprehensive Review of Nanoparticles: From Classification to Application and Toxicity

Nanoparticles are structures that possess unique properties with high surface area-to-volume ratio. Their small size, up to 100 nm, and potential for surface modifications have enabled their use in a wide range of applications. Various factors influence the properties and applications of NPs, including the synthesis method and physical attributes such as size and shape. Additionally, the materials used in the synthesis of NPs are primary determinants of their application. Based on the chosen material, NPs are generally classified into three categories: organic, inorganic, and carbon-based. These categories include a variety of materials, such as proteins, polymers, metal ions, lipids and derivatives, magnetic minerals, and so on. Each material possesses unique attributes that influence the activity and application of the NPs. Consequently, certain NPs are typically used in particular areas because they possess higher efficiency along with tenable toxicity. Therefore, the classification and the base material in the NP synthesis hold significant importance in both NP research and application. In this paper, we discuss these classifications, exemplify most of the major materials, and categorize them according to their preferred area of application. This review provides an overall review of the materials, including their application, and toxicity.

Preparation and Application of High Internal Phase Pickering Emulsion Gels Stabilized by Starch Nanocrystal/Tannic Acid Complex Particles

Herein, the starch nanocrystal/tannic acid (ST) complex particles, which were prepared based on the hydrogen bond between starch nanocrystal (SNC) and tannic acid (TA), were successfully used to stabilize the HIPPE gels. The optimal TA concentration of the ST complex particles resulted in better water dispersibility, surface wettability, and interfacial activity as compared to SNC. The hydrogen bond responsible for the formation of ST complex particles and subsequent stable emulsions was demonstrated by varying the pH and ionic strength of the aqueous phase. Notably, the HIPPE gels stabilized via the ST complex particles can maintain long-term stability for up to three months. The HIPPEs stabilized via the ST complex particles all displayed gel-like features and had smaller droplets and denser droplet networks than the SNC-stabilized HIPPEs. The rheological behavior of HIPPE gels stabilized via the ST complex particles can be readily changed by tuning the mass ratio of SNC and TA as well as pH. Finally, the prepared HIPPE gels used to effectively protect encapsulated β-carotene against high temperatures and ultraviolet radiation and its controllable release at room temperature were demonstrated. It is anticipated that the aforementioned findings will provide new perspectives on the preparation of Pickering emulsion for delivery systems.

A review on natural biopolymers in external drug delivery systems for wound healing and atopic dermatitis

Despite the advantages of topical administration in the treatment of skin diseases, current marketed preparations face the challenge of the skin's barrier effect, leading to low therapeutic effectiveness and undesirable side effects. Hence, in recent years the management of skin wounds, the main morbidity-causing complication in hospital environments, and atopic dermatitis, the most common inflammatory skin disease, has become a great concern. Fortunately, new, more effective, and safer treatments are already under development, with chitosan, starch, silk fibroin, agarose, hyaluronic acid, alginate, collagen, and gelatin having been used for the development of nanoparticles, liposomes, niosomes and/or hydrogels to improve the delivery of several molecules for the treatment of these diseases. Biocompatibility, biodegradability, increased viscosity, controlled drug delivery, increased drug retention in the epidermis, and overall mitigation of adverse effects, contribute to an effective treatment, additionally providing intrinsic antimicrobial and wound healing properties. In this review, some of the most recent success cases of biopolymer-based drug delivery systems as part of nanocarriers, semi-solid hydrogel matrices, or both (hybrid systems), for the management of skin wounds and atopic dermatitis, are critically discussed, including composition and in vitro, ex vivo and in vivo characterization, showing the promise of these external drug delivery systems.

Weakening the integrity of waxy starch granules by selective degradation of amorphous matrices using gaseous hydrogen chloride

Waxy corn starch with 6-12 % moisture was degraded by gaseous hydrogen chloride (HCl(g)) then characterized chromatographically and microscopically to investigate the relationship between moisture-resulting changes in unit chain properties of starch and its susceptibility to swelling. Starches with the highest degradation extents at different moisture content had recoveries of 76-83 % (w/w) and the weight-average degrees of polymerization of 66-93 anhydroglucose unit. Additionally, the HCl(g)-degraded starches were still of birefringent granules but with internal cavity. When increasing the swelling temperature from 25 to 40 °C, some granules showed enlarged internal cavity, and some were fragmented. Change in granule morphology, accompanied by leaching of constituting polymers, was particularly evident for starch with preferential degradation of B1 chains over B2+ chains as the moisture content decreased from 9 % to 6 %. These findings not only manifest the impact of changes in B2+ and B1 chains on the swelling characteristic of HCl(g)-degraded granules, but also demonstrate an approach for weakening the integrity of granules by selective degradation of amorphous matrices using HCl(g).

Physicochemical properties of a novel chestnut porous starch nanoparticle

A novel chestnut porous starch nanoparticle (PSNP) was successfully synthesized, combining the properties of starch nanoparticle (SNP) and porous starch. The SNP obtained through ultrasonic and acid hydrolysis, exhibited a smaller particle size (173.9 nm) and a higher specific surface area (SSA) compared to native starch. After the synergistic hydrolysis by α-amylase and glucoamylase, the porous structure appeared on the surface of SNP. The prepared PSNP had a size of 286.3 nm and the highest SSA. In the adsorption experiments, PSNP showed higher capacities for adsorbing water, oil and methylene blue (MB) compared to other samples. The acid and enzymatic treatments resulted in a decrease in the levels of total starch content and amylose ratio. Furthermore, the treatments increased the levels of relative crystallinity (RC) and solubility, while decreasing the short-range ordered structure and swelling ratio at high temperatures. It was observed that the SSA of starch granules positively correlated with the MB and water adsorption capacity (WAC), solubility, and RC. These findings highlight the potential of the novel PSNP as an efficient adsorbent for bioactive substances and dyes.

A facile strategy for the large-scale preparation of starch-based AIE luminescent nanoaggregates via host-guest interactions and their versatile applications

Luminescent nanomaterials with outstanding optical properties have attracted growing interest due to their widespread applications. However, large-scale fabrication of luminescent nanomaterials with desired properties through a simple and economical process remains challenging. As a renewable natural resource, starch is non-toxic, easily accessible, and inexpensive, making it a popular choice for uses in various biomedical fields. In this work, we present a facile assembly strategy for the fabrication of starch-based luminescent nanoaggregates using starch as the host material and aggregation-induced emission luminogens (AIEgens) as guest molecules. By employing simple procedures under mild conditions, highly luminescent nanoparticles with small sizes, high water dispersibility, and low cytotoxicity are prepared on a large scale. The resulting nano-assemblies demonstrate significantly enhanced fluorescence intensities, reduced susceptibility to photobleaching and low cytotoxicity. These fluorescent supramolecular aggregates can be employed in various application fields, including the fabrication of fluorescent hydrogels, fingerprint detection, cell imaging and in vivo lymphatic system imaging. The methodology developed in this work has immense potential to greatly promote the production of high-quality nanoparticles on the industrial scale, offering a cost-effective solution that can meet the needs of various applications and pave the way for wider implementation of nanotechnology.

Maltodextrin-Nanoparticles as a Delivery System for Nasal Vaccines: A Review Article

Nanoparticles are increasingly being studied as antigen delivery systems for immunization with nasal vaccines. The addition of adjuvants is still generally required in many nanoparticle formulations, which can induce potential side effects owing to mucosal reactogenicity. In contrast, maltodextrin nanoparticles do not require additional immunomodulators, and have been shown to be efficient vaccine delivery systems. In this review, the development of maltodextrin nanoparticles is presented, specifically their physico-chemical properties, their ability to load antigens and deliver them into airway mucosal cells, and the extent to which they trigger protective immune responses against bacterial, viral, and parasitic infections. We demonstrate that the addition of lipids to maltodextrin nanoparticles increases their potency as a vaccine delivery system for nasal administration.

A smart thermoresponsive macroporous 4D structure by 4D printing of Pickering-high internal phase emulsions stabilized by plasma-functionalized starch nanomaterials for a possible delivery system

Hierarchically porous structures combine microporosity, mesoporosity, and microporosity to enhance pore accessibility and transport, which are crucial to develop high performance materials for biofabrication, food, and pharmaceutical applications. This work aimed to develop a 4D-printed smart hierarchical macroporous structure through 3D printing of Pickering-type high internal phase emulsions (Pickering-HIPEs). The key was the utilization of surface-active (hydroxybutylated) starch nanomaterials, including starch nanocrystals (SNCs) (from waxy maize starch through acid hydrolysis) or starch nanoparticles (SNPs) (obtained through an ultrasound treatment). An innovative procedure to fabricate the functionalized starch nanomaterials was accomplished by grafting 1,2-butene oxide using a cold plasma technique to enhance their surface hydrophobicity, improving their aggregation, and thus attaining a colloidally stabilized Pickering-HIPEs with a low concentration of each surface-active starch nanomaterial. A flocculation of droplets in Pickering-HIPEs was developed after the addition of modified SNCs or SNPs, leading to the formation of a gel-like structure. The 3D printing of these Pickering-HIPEs developed a highly interconnected large pore structure, possessing a self-assembly property with thermoresponsive behavior. As a potential drug delivery system, this thermoresponsive macroporous 3D structure offered a lower critical solution temperature (LCST)-type phase transition at body temperature, which can be used in the field of smart releasing of bioactive compounds.

Starch-based materials for drug delivery in the gastrointestinal tract-A review

Starch is a natural copolymer with unique physicochemical characteristics. Historically, it has been physically, chemically, or enzymatically modified to obtain ad-hoc functional properties for its use in different applications. In this context, the use of starch-based materials in drug delivery systems (DDSs) has gained great attention mainly because it is cheap, biodegradable, biocompatible, and renewable. This paper reviews the state of the art in starch-based materials design for their use in drug-controlled release with internal stimulus responsiveness; i.e., pH, temperature, colonic microbiota, or enzymes; specifically, those orally administered for its release in the gastrointestinal tract (GIT). Physical-chemical principles in the design of these materials taking into account their response to a particular stimulus are discussed. The relationship between the type of DDSs structure, starch modification routes, and the corresponding drug release profiles are systematically analyzed. Furthermore, the challenges and prospects of starch-based materials for their use in stimulus-responsive DDSs are also debated.

Impact of long-term ultrasound treatment on structural and physicochemical properties of starches differing in granule size

Granule size is a critical parameter affecting starch processing properties. Ultrasound treatments of up to 22 h were applied on two starches differing in granule size (quinoa starch and maize starch). The two starches showed significantly different trends in both structural and physicochemical aspects affected by the ultrasound treatments. For the small granule starch (volume-weighted mean particle size of 1.79 μm), short-term ultrasonication caused an increase of swelling power. As the treatment time increased, the physicochemical properties were influenced by the degradation of amylopectin external chains. The X-ray diffraction results showed a decrease of relative crystallinity and changes of peak areas with long-term treatment. On the other hand, a balance between amylose leaching and surface damages was seen for the large granule starch (volume-weighted mean particle size of 18.3 μm). The effect of ultrasound modification on starches with different molecular and granular structures was discussed. A possible mechanism of the ultrasound effect was proposed.

Short-chain glucan self-assembly for green synthesis of functional biomaterials: Mechanism, synthesis, and microstructural control

Short-chain glucan (SCG) is a linear homopolymer containing 10 to 50 glucose units linked with α(1,4) glycosidic bonds. With its abundant, low-cost, nontoxic, biodegradable/biocompatible nature, self-assembled SCG particles (SSC) have emerged as functional biomaterials, which have recently attracted tremendous attentions in various fields. SCG self-assembly occurs through the spontaneous association of molecules under equilibrium conditions into stable and structurally well-defined nanoscale or micrometer-scale aggregates, which is governed by various intermolecular non-covalent interactions, including hydrogen-bonding, electrostatic, hydrophobic, and van der Waals. With precise and effective control of the self-assembly process of SSC, its structural modulation and function integration can be expected. Thus, we convinced that SCG self-assembly could provide an effective means of developing starch-based functional biomaterials with beneficial health properties and wide application in food industries. In this review, we provide an overview of recent advances in the green approach for the self-assembly of SSC, as well as the influence of thermodynamic and kinetic factors on its morphology and physicochemical properties. We highlight recent contributions to developing strategies for the construction of SSC with increasing complexity and functionality that are suitable for a variety of food applications. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Size-controlled synthesis of xylan micro / nanoparticles by self-assembly of alkali-extracted xylan

Valorization of underutilized biobased feedstocks like hetero-polysaccharides is critical for the development of the biorefinery concept. Towards this goal, highly uniform xylan micro/nanoparticles with a particle size ranging from 400 nm to 2.5 μm in diameter were synthesized by a facile self-assembly method in aqueous solutions. Initial concentration of the insoluble xylan suspension was utilized to control the particle size. The method utilized supersaturated aqueous suspensions formed at standard autoclaving conditions without any other chemical treatments to create the resulting particles as solutions cooled to room temperature. Processing parameters of the xylan micro/nanoparticles were systematically studied and correlated with both the morphology and size of xylan particles. By adjusting the crowding of the supersaturated solutions, highly uniform dispersions of xylan particles were synthesized of defined size. The xylan micro/nanoparticles prepared by self-assembly have a quasi-hexagonal shape, like a tile, and depending upon solution concentrations xylan nanoparticles with a thickness of <100 nm were achieved at high concentrations. Based on the usefulness of polysaccharide nanoparticles, like cellulose nanocrystals, these particles have potential for unique structures for hydrogels, aerogels, drug delivery, and photonic materials. This study highlights the formation of a diffraction grating film for visible light with these size-controlled particles.

Polysaccharides-based nanocarriers enhance the anti-inflammatory effect of curcumin

Curcumin (CUR) has been discovered to have many biological activities, including anti-inflammatory, anti-cancer, anti-oxygenation, anti-human immunodeficiency virus, anti-microbial and exhibits a good effect on the prevention and treatment of many diseases. However, the limited properties of CUR, including the poor solubility, bioavailability and instability caused by enzymes, light, metal irons, and oxygen, have compelled researchers to turn their attention to drug carrier application to overcome these drawbacks. Encapsulation may provide potential protective effects to the embedding materials and/or have a synergistic effect with them. Therefore, nanocarriers, especially polysaccharides-based nanocarriers, have been developed in many studies to enhance the anti-inflammatory capacity of CUR. Consequently, it's critical to review current advancements in the encapsulation of CUR using polysaccharides-based nanocarriers, as well as further study the potential mechanisms of action where polysaccharides-based CUR nanoparticles (the complex nanoparticles/Nano CUR-delivery systems) exhibit their anti-inflammatory effects. This work suggests that polysaccharides-based nanocarriers will be a thriving field in the treatment of inflammation and inflammation-related diseases.

Advances in Starch Nanoparticle for Emulsion Stabilization

Starch nanoparticles (SNPs) are generally defined as starch grains smaller than 600-1000 nm produced from a series of physical, chemical, or biologically modified starches. Many studies have reported the preparation and modification of SNPs, which are mostly based on the traditional "top-down" strategy. The preparation process generally has problems with process complexity, long reaction periods, low yield, high energy consumption, poor repeatability, etc. A "bottom-up" strategy, such as an anti-solvent method, is proven to be suitable for the preparation of SNPs, and they are synthesized with small particle size, good repeatability, a low requirement on equipment, simple operation, and great development potential. The surface of raw starch contains a large amount of hydroxyl and has a high degree of hydrophilicity, while SNP is a potential emulsifier for food and non-food applications.

Structural Properties of Lotus Seed Starch Nanocrystals Prepared Using Ultrasonic-Assisted Acid Hydrolysis

This study provides a novel method of preparing lotus seed starch nanocrystals (LS-SNCs) using acid hydrolysis combined with ultrasonic-assisted acid hydrolysis (U-LS-SNCs) and evaluates the structural characteristics of starch nanocrystals using scanning electron microscopy; analysis of particle size, molecular weight, and X-ray diffraction patterns; and FT-IR spectroscopy. The results showed that the preparation time of U-LS-SNCs could be reduced to 2 days less than that for LS-SNCs. The smallest particle size and molecular weight were obtained after a 30 min treatment with 200 W of ultrasonic power and 5 days of acid hydrolysis. The particle size was 147 nm, the weight-average molecular weight was 3.42 × 10⁴ Da, and the number-average molecular weight was 1.59 × 10⁴ Da. When the applied ultrasonic power was 150 W for 30 min and acid hydrolysis was applied for 3 days, the highest relative crystallinity of the starch nanocrystals was 52.8%. The modified nanocrystals can be more widely used in various applications such as food-packaging materials, fillers, pharmaceuticals, etc.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

Strain-induced 3D-oriented crystallites in natural rubber/chitin nanofiber composites

Natural rubber (NR) composites containing bio-based chitin nanofibers (ChNFs) exhibit a wide range of mechanical properties - from rubber to plastic behavior - with increasing chitin contents. A constrained 3-dimensional network can be formed by mixing natural rubber latex and a modified zwitterionic rigid chitin counterpart. By inclusion of highly anisotropic chitin nanofibers (30 wt%), strain-induced NR crystallization occurs at a much lower strain of 50%. More intriguingly, 2D-WAXD results reveal that the strain-induced crystallization of NR/ChNFs composites show 3-dimensionally oriented crystallite formation behaving similar to "3D-single crystals orientation" when the content of ChNFs is over 5 wt%. It is suggested that not only c-axis (NR chains) orients along the stretching direction, but also the a- and b-axes deliberately arrange along the normal direction and transverse direction, respectively. Structure and morphology in 3-dimensional spaces after strain-induced crystallization of the NR/ChNFs30 composite are investigated in detail. Therefore, this study might pave a new way to enhance mechanical properties by incorporation of ChNFs, obtaining 3-dimensionally oriented crystallites of novel multifunctional NR/ChNFs composite with shape memory ability.

Biobased Nanomaterials─The Role of Interfacial Interactions for Advanced Materials

This review presents recent advances regarding biomass-based nanomaterials, focusing on their surface interactions. Plant biomass-based nanoparticles, like nanocellulose and lignin from industry side streams, hold great potential for the development of lightweight, functional, biodegradable, or recyclable material solutions for a sustainable circular bioeconomy. However, to obtain optimal properties of the nanoparticles and materials made thereof, it is crucial to control the interactions both during particle production and in applications. Herein we focus on the current understanding of these interactions. Solvent interactions during particle formation and production, as well as interactions with water, polymers, cells and other components in applications, are addressed. We concentrate on cellulose and lignin nanomaterials and their combination. We demonstrate how the surface chemistry of the nanomaterials affects these interactions and how excellent performance is only achieved when the interactions are controlled. We furthermore introduce suitable methods for probing interactions with nanomaterials, describe their advantages and challenges, and introduce some less commonly used methods and discuss their possible applications to gain a deeper understanding of the interfacial chemistry of biobased nanomaterials. Finally, some gaps in current understanding and interesting emerging research lines are identified.

Starch Nanoparticles: Preparation, Properties and Applications

Starch as a natural polymer is abundant and widely used in various industries around the world. In general, the preparation methods for starch nanoparticles (SNPs) can be classified into 'top-down' and 'bottom-up' methods. SNPs can be produced in smaller sizes and used to improve the functional properties of starch. Thus, they are considered for the various opportunities to improve the quality of product development with starch. This literature study presents information and reviews regarding SNPs, their general preparation methods, characteristics of the resulting SNPs and their applications, especially in food systems, such as Pickering emulsion, bioplastic filler, antimicrobial agent, fat replacer and encapsulating agent. The aspects related to the properties of SNPs and information on the extent of their utilisation are reviewed in this study. The findings can be utilised and encouraged by other researchers to develop and expand the applications of SNPs.

A novel very small granular starch from Chlorella sp. MBFJNU-17

Novel resources of very small granular starch are of great interests to food scientists. We previously found Chlorella sp. MBFJNU-17 contained small granular starch but whether the MBFJNU-17 was a novel resource of very small granular starch remained unresolved. This study isolated and characterized the starch from MBFJNU-17 in comparison with quinoa starch (a typical very small granular starch), and discussed whether the MBFJNU-17 could be a resource of very small granular starch. Results showed that chlorella starch displayed a smaller size (1024 nm) than quinoa starch did (1107 nm), suggesting MBFJNU-17 was a good resource of very small granular starch. Additionally, chlorella starch had less amylose, higher proportion of long amylopectin branches, more ordered structures, thinner amorphous lamellae, better paste thermostability, and slower enzymatic digestion than quinoa starch did. These findings indicated that Chlorella sp. MBFJNU-17 was a novel resource of very small granular starch with desirable thermostability and nutritional attributes.

Synthesis of controlled-size starch nanoparticles and superparamagnetic starch nanocomposites by microemulsion method

In this study, a synthesis process based on the microemulsion method (ME) was developed with the aim to produce controlled-size starch nanoparticles (SNPs). Several formulations were tested for the preparation of the W/O microemulsions varying the organic/aqueous phase ratios and co-stabilizers concentrations. SNPs were characterized in terms of size, morphology, monodispersity and crystallinity. Spherical shape particles with mean sizes 30-40 nm were prepared. The method was then used to simultaneously synthesize SNPs and iron oxide nanoparticles with superparamagnetic properties. Starch-based nanocomposites with superparamagnetic properties and controlled size were obtained. Therefore, the microemulsion method developed could be considered an innovative technology for the design and development of novel functional nanomaterials. The starch-based nanocomposites were evaluated in terms of morphology and magnetic properties, and they are being considered as promising sustainable nanomaterials for different biomedical applications.

Developing Self-Assembled Starch Nanoparticles in Starch Nanocomposite Films

Starch nanoparticles (SNPs) are synthesized by different precipitation techniques using corn starch, and SNP films are prepared by the evaporation casting method. The morphological study is investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The distribution and sizes of precipitated SNPs after synthesizing are discovered by these methods as well. The crystallinity of the SNPs is studied by the X-ray diffractometry (XRD) method that demonstrates reduction compared to neat starch granules, and it is changed from A-style to V_H-style after precipitation. The chemical bonding of different SNPs after the nanoprecipitation is analyzed by Fourier transform infrared spectroscopy (FT-IR). Thermogravimetric analysis (TGA) demonstrates the decomposition of starch nanoparticles and the starch matrix that is related to the depolymerization of carbon chains in the range of 260 to 350 °C. The mechanical properties of the SNP films versus the temperature changing are discovered by dynamic mechanical analysis (DMA). The water contact angles of SNP films are measured using a goniometer, and the results showed the hydrophobic surfaces of the prepared films. Our study indicates that SNPs have a promising impact on the properties of corn starch films, which would be useful in biodegradable packaging material.

Chestnut Starch Nanocrystal Combined with Macadamia Protein Isolate to Stabilize Pickering Emulsions with Different Oils

This study investigated the formation and molecular interaction mechanism of chestnut starch nanocrystal (SNC)/macadamia protein isolate (MPI) complexes and their application in edible oil-in-water Pickering emulsion (PE). SNC/MPI complexes were characterized by scanning electron microscopy and particle size analyzer. The PEs stabilized by SNC/MPI complexes were characterized by confocal laser scanning microscopy and rheological measurement. The results showed that hydrogen bonds between the two particles significantly affected the secondary structure and assembly of SNC/MPI complexes at the oil/water interface. The optimal mass ratio of SNC to MPI in the complexes with the best stability was determined as 20:1. The formation of edible oil-in-water PEs stabilized by SNC/MPI complexes significantly improved the oxidative and storage stability of different edible oils (olive oil, walnut oil, edible tea oil, and macadamia oil). These different edible oil-in-water PEs stabilized by SNC/MPI could be used as effective carriers of quercetin with their loading rates higher than 93%.

Advances in isolation, characterization, modification, and application of Chenopodium starch: A comprehensive review

The Chenopodium genus includes >250 species, among which only quinoa, pigweed, djulis, and kaniwa have been explored for starches. Chenopodium is a non-conventional and rich source of starch, which has been found effective in producing different classes of food. Chenopodium starches are characterized by their smaller granule size (0.4-3.5 μm), higher swelling index, shorter/lower gelatinization regions/temperature, good emulsifying properties, and high digestibility, making them suitable for food applications. However, most of the investigations into Chenopodium starches are in the primary stages (isolation, modification, and characterization), except for quinoa. This review comprehensively explores the major developments in Chenopodium starch research, emphasizing isolation, structural composition, functionality, hydrolysis, modification, and application. A critical analysis of the trends, limitations, and scope of these starches for novel food applications has also been provided to promote further scientific advancement in the field.

Formation of sweet potato starch nanoparticles by ultrasonic—assisted nanoprecipitation: Effect of cold plasma treatment

Starch nanoparticles (SNPs) were produced from sweet potato starches by ultrasonic treatment combined with rapid nanoprecipitation. The starch concentration, ultrasonic time, and the ratio of starch solution to ethanol were optimized through dynamic light scattering (DLS) technique to obtain SNPs with a Z-average size of 64.51 ± 0.15 nm, poly dispersity index (PDI) of 0.23 ± 0.01. However, after freeze drying, the SNPs showed varying degrees of aggregation depending on the particle size of SNPs before freeze-drying. The smaller the particle size, the more serious the aggregation. Therefore, we tried to treat SNPs with dielectric barrier discharge cold plasma before freeze drying. Properties including morphological features, crystalline structure and apparent viscosity of various starches were measured by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and rheometer, respectively. The results showed that, after cold plasma (CP) treatment, the aggregation of SNPs during freeze drying was significantly inhibited. Compared to the native sweet potato starch, SNPs showed a higher relative crystallinity and a lower apparent viscosity. After CP treatment, the relative crystallinity of CP SNPs was further higher, and the apparent viscosity was lower. This work provides new ideas for the preparation of SNPs and could promote the development of sweet potato SNPs in the field of active ingredient delivery.

Recent Trends in the Preparation of Nano-Starch Particles

Starch is affected by several limitations, e.g., retro-gradation, high viscosity even at low concentrations, handling issues, poor freeze-thaw stability, low process tolerance, and gel opacity. In this context, physical, chemical, and enzymatic methods have been investigated for addressing such limitations or adding new attributes. Thus, the creation of biomaterial-based nanoparticles has sparked curiosity. Because of that, single nucleotide polymorphisms are gaining a lot of interest in food packaging technology. This is due to their ability to increase the mechanical and water vapor resistance of the matrix, as well as hide its re-crystallization during storage in high-humidity atmospheres and enhance the mechanical properties of films when binding in paper machines and paper coating. In medicine, single nucleotide polymorphisms (SNPs) are suitable as carriers in the field of drug delivery for immobilized bioactive or therapeutic agents, as well as wastewater treatments as an alternative to expensive activated carbons. Starch nanoparticle preparations can be performed by hydrolysis via acid hydrolysis of the amorphous part of a starch molecule, the use of enzymes such as pullulanase or isoamylase, or a combination of two regeneration and mechanical treatments with the employment of extrusion, irradiation, ultrasound, or precipitation. The possibility of obtaining cheap and easy-to-use methods for starch and starch derivative nanoparticles is of fundamental importance. Nano-precipitation and ultra-sonication are rather simple and reliable methods for nanoparticle production. The process involves the addition of a diluted starch solution into a non-solvent, and ultra-sonication aims to reduce the size by breaking the covalent bonds in polymeric material due to intense shear forces or mechanical effects associated with the collapsing of micro-bubbles by sound waves. The current study focuses on starch nanoparticle manufacturing, characterization, and emerging applications.

Formation and properties of starch-palmitic acid complex nanoparticles and their influence on Pickering emulsions

The starch-palmitic acid complex nanoparticles were prepared by Cyperus esculentus starch with enzymatic hydrolysis for different times and then complexed with palmitic acid. The FACE and ¹³C CP/MAS NMR analysis showed that there were more amylose molecules formed and complexed with palmitic acid when starch was treated by enzymatic hydrolysis for 4 h. With the enzymatic hydrolysis time increasing from 0 h to 4 h, the mean size of starch-palmitic acid complex nanoparticles increased from 500 ± 38.83 nm to 567.2 ± 22.32 nm, the size distribution became more uniform, and the crystallinity increased from 14.99% to 47.72%. The starch-palmitic acid complex nanoparticles could be used as a kind of stabilizers to stabilize Pickering emulsions. Rheological properties and storage stability of Pickering emulsions indicted that starch-palmitic acid complex nanoparticles can better stabilize. The starch-palmitic acid complex nanoparticles could be used as stabilizer of Pickering emulsion and encapsulation of bioactive compounds.

Characteristics and ethylene encapsulation properties of V-type linear dextrin with different degrees of polymerisation

The objective of this research was to investigate the effects of preparation method on the characteristics and ethylene loading capacity of V-type linear dextrin (LD). LD with different degrees of polymerisation were obtained from debranched starch by gradient ethanol precipitation. X-ray diffraction (XRD) patterns of samples obtained by precipitation and anti-solvent precipitation presented A + V-type crystalline structure. However, the percentage of V-type structure of samples obtained by anti-solvent precipitation was significantly higher than for samples prepared by precipitation, which was further confirmed by nuclear magnetic resonance spectroscopy (NMR), and molecular dynamics simulation supported the XRD and NMR results. The ethylene encapsulation capabilities of samples fabricated by different methods were in range of 1.15-4.68 cm³/g. Ethylene release from V-type LD was a physical process at different storage temperatures, and the higher percentage of V-type structure, the slower release rate. Thus, a higher V-type structure content was beneficial for encapsulation of gaseous molecules.

Characterization of resistant starch nanoparticles prepared via debranching and nanoprecipitation

Cyperus esculentus starch was treated by pullulanase debranching and nanoprecipitation to prepare resistant starch nanoparticles. Amylose contents, rheological properties of debranched starch and the size, crystalline structure, resistant starch contents of the prepared starch nanoparticles were investigated. The results of amylose contents showed that enzymatic hydrolysis 4 h was the most appropriate enzymatic hydrolysis time. Dynamic light scattering analysis and scanning electron microscopy observations showed that when the starch solution was added to the ethanol, the larger the amount of ethanol, the more conducive to the formation of small size starch nanoparticles. When volume ratio of starch solution/ethanol was 1/5, the particle size was 271.1 nm, the content of resistant starch was higher (15.28%). X-ray diffraction results indicated that resistant starch nanoparticles had V-type crystalline structure. Pullulanase debranching and nanoprecipitation can be utilized to prepare smaller size of Cyperus esculentus resistant starch with higher efficiency.