CuO nanoparticles incorporated in hierarchical MFI zeolite as highly active electrocatalyst for non-enzymatic glucose sensing

In situ growth of lanthanides-doped nanoparticles inside zeolites with enhanced upconversion emission for gallic acid detection

The combination of upconversion nanoparticles (UCNPs) with porous zeolites could enable the development of multifunctional composites and extend their optical applications in sensing, detection and biomedical monitoring. Herein, a series of high luminescent UCNPs@Zeolites nano-micro composites were constructed via the in situ growth strategy, by taking the low phonon-energy fluoride nanoparticles of NaLnF4 (Ln = Y, Gd) as doping hosts for Er3+/Yb3+, desilicated FAUY and ZSM-5 as the target zeolites. Benefiting from the formation of tightly combined interfaces between the UCNPs and the target zeolites that effectively passive the surface defects of UCNPs, three orders of magnitude of improved upconversion emission in maximum was obtained under 980 nm excitation through afterward heat treatment at 400 ℃. Moreover, the pre-exchange of Yb3+ into target zeolites before the in situ growth of UCNPs is another feasible approach to drastically improve the upconversion emission intensity of the UCNPs@Zeolites nano-micro composites. By taking NaGdF4:Yb,Er@DSZSM-5/HT as an example probe, the detection of GA was demonstrated and the detection ability of which is super than that of the corresponding bare NaGdF4:Yb,Er UCNPs. This research provided a universal approach to construct the UCNPs@Zeolites nano-micro composites with varied upconversion emission colors simply by choosing activator ions, which therefore indicates wide potential applications.

Removal of Organics from Landfill Leachate by Heterogeneous Fenton-like Oxidation over Copper-Based Catalyst

Landfill leachates are a mixture of high concentration organic and inorganic contaminants and need to be appropriately treated due to their toxicity and severe adverse effects on the environment. Here, we studied the treatment of landfill leachate through a heterogeneous Fenton-like oxidation process using a zirconia supported copper catalyst (Cu/ZrO2). Reaction conditions such as pH, amount of catalyst, oxidant dose, temperature, and reaction time were investigated and their effects on pollutant abatement discussed. AOS (average oxidation state) and COS (carbon oxidation state) parameters were used for the evaluation of the degree of oxidation of the process, obtaining some insight into the formation of oxidized intermediates (partial oxidation) and the total oxidation (mineralization) of the leachate during the reaction. A two-step oxidation process enhanced the overall performance of the reaction with an abatement of organic compounds of 92% confirming the promising activity of a copper-based catalyst for the treatment of liquid waste. Higher catalytic activity was achieved when the following reaction conditions were applied: 70 °C, pH 5, 200 mg/L of catalyst, 30 mL/L of H2O2 dose, and 150 min. In addition, durability of the catalyst under optimized reaction conditions was verified by repeated reaction cycles.

Non-Enzymatic Glucose Sensors Involving Copper: An Electrochemical Perspective

Non-enzymatic glucose sensors based on the use of copper and its oxides have emerged as promising candidates to replace enzymatic glucose sensors owing to their stability, ease of fabrication, and superior sensitivity. This review explains the theories of the mechanism of glucose oxidation on copper transition metal electrodes. It also presents an overview on the development of among the best non-enzymatic copper-based glucose sensors in the past 10 years. A brief description of methods, interesting findings, and important performance parameters are provided to inspire the reader and researcher to create new improvements in sensor design. Finally, several important considerations that pertain to the nano-structuring of the electrode surface is provided.

Poly(azomethine-urethane) and zeolite-based composite: Fluorescent biosensor for DNA detection

In the present paper, a highly selective and sensitive fluorescent biosensor based on poly(azomethine-urethane) and zeolite for the determination of DNA molecules was developed. Zeolite was chosen to enhance with anionic or cationic functional groups in polymer matrix and interaction between polymer and DNA. Several parameters such as polymer concentration, pH and incubation time effect on the sensitivity of the fluorescent biosensor were optimized. Linear range was determined between 2.50 and 25.00 nmol/L DNA concentration and limit of detection (LOD) of the biosensor was calculated as 0.095 nmol/L under the optimal conditions. Interference study was also performed in the presence of different amino acids, cations and organic compounds. The results clearly indicated that the tested cations and compounds were not induced a significant fluorescence change and the proposed zeolite-based biosensor was shown a good selectivity for DNA.

Rational Design of Yolk-Shell CuO/Silicalite-1@mSiO2 Composites for a High-Performance Nonenzymatic Glucose Biosensor

In this study, an interface coassembly strategy is employed to rationally synthesize a yolk-shell CuO/silicalite-1@void@mSiO₂ composite consisting of silicalite-1 supported CuO nanoparticles confined in the hollow space of mesoporous silica, and the obtained composite materials were used as a novel nonenzymatic biosensor for highly sensitive and selective detecting glucose with excellent anti-interference ability. The synthesis of CuO/silicalite-1@mSiO₂ includes four steps: coating silicalite-1 particles with resorcinol-formaldehyde polymer (RF), immobilization of copper species, interface deposition of a mesoporous silica layer, and final calcination in air to decompose RF and form CuO nanoparticles. The unique hierarchical porous structure with mesopores and micropores is beneficial to selectively enrich glucose for fast oxidation into gluconic acid. Besides, the mesopores in the silica shell can effectively inhibit the large interfering substances or biomacromolecules diffusing into the void as well as the loss of CuO nanoparticles. The hollow chamber inside serves as a nanoreactor for glucose oxidation catalyzed by the active CuO nanoparticles, which are spatially accessible for glucose molecules. The nonenzymatic glucose biosensors based on CuO/silicalite-1@mSiO₂ materials show excellent electrocatalytic sensing performance with a wide linear range (5-500 μM), high sensitivity (5.5 μA·mM^-1·cm^-2), low detection limit (0.17 μM), and high selectivity against interfering species. Furthermore, the unique sensors even display a good capability in the determination of glucose in real blood serum samples.

Effect of zinc oxide amounts on the properties and antibacterial activities of zeolite/zinc oxide nanocomposite

Nanocomposites of zinc oxide loaded on a zeolite (Zeolite/ZnO NCs) were prepared using co-precipitation method. The ratio effect of ZnO wt.% to the Zeolite on the antibacterial activities was investigated. Various techniques were used for the nanocomposite characterization, including UV-vis, FTIR, XRD, EDX, FESEM and TEM. XRD patterns showed that ZnO peak intensity increased while the intensities of Zeolite peaks decreased. TEM images indicated a good distribution of ZnO-NPs onto the Zeolite framework and the cubic structure of the zeolite was maintained. The average particle size of ZnO-nanoparticles loaded on the surface of the Zeolite was in the range of 1-10nm. Moreover, Zeolite/ZnO NCs showed noticeable antibacterial activities against the tested bacteria; Gram- positive and Gram- negative bacteria, under normal light. The efficiency of the antibacterial increased with increasing the wt.% from 3 to 8 of ZnO NPs, and it reached 87% against Escherichia coli E266.

CuO nanothorn arrays on three-dimensional copper foam as an ultra-highly sensitive and efficient nonenzymatic glucose sensor

A novel glucose sensor based on a CuO nanothorns/Cu foam was prepared using a low-cost and facile method.